Material Safety Data Sheet

Transcription

1 WHMIS (Pictograms) Class A: Compressed gas. Class B-1: Flammable gas. Class D-B: Material causing other toxic effects (TOXIC). WHMIS (Classification) Section 1. Chemical Product and Company Identification Product Name/ Trade name Synonym Chemical Family Chemical Formula Manufacturer/ Supplier TSCA DSL/ NDSL Glybet Surface and Air Not applicable. Betco Corporation 1001 Brown Avenue Toledo, Ohio (800) TSCA Inventory: All components listed or are exempt from listing. All components listed unless noted elsewhere on this MSDS Material Safety Data Sheet This MSDS is prepared in accordance with OSHA 9 CFR Code CAS # HCS Class: Flammable aerosol. HCS Class: Irritating substance. Print Date In Case of Emergency HCS 089 Mixture. Validation Date 3//007 3/3/007 CHEMTREC (800) Protective Clothing Section. Composition and Information on Ingredients Name CAS # % by Weight Exposure Limits LC50/LD50 Isopropyl Alcohol OSHA (United States). TWA: 400 ppm ORAL (LD50): Acute: mg/kg [Rat]. Isobutane TWA: 800 ppm OSHA (United States). TWA: 800 ppm Triethylene Glycol Perfume Oil <1 Ammonium Hydroxide Alkyl (68% C1, 3% C14) dimetheyl ethylbenzyl ammonium chlorides Alkyl Dimethyl Ammonium Chloride Section 3. Hazards Identification Potential Acute Health Effects Potential Chronic Health Effects Carcinogenic Effects Hazardous in case of skin contact (irritant), of eye contact (irritant). May aggravate existing respiratory conditions. May aggravate existing skin conditions. Not classified or listed by IARC, NTP, OSHA, EU and ACGIH.

2 Section 4. First Aid Measures Eye Contact Skin Contact Inhalation Ingestion In case of contact, immediately rinse slowly with plenty of water for at least 15-0 minutes.check for and remove any contact lenses, if present after the first 5 minutes, then continue rinsing Call a poison control center or doctor for treatment advice. Remove contaminated clothing and shoes.in case of contact, immediately flush skin with plenty of water for 15-0 minutes. Call a poison control cetner or doctor for treatment advice. If inhaled, remove to fresh air. If not breathing, give artificial respiration. If breathing is difficult, give oxygen. Get medical attention. Do NOT induce vomiting unless directed to do so by medical personnel. Never give anything by mouth to an unconscious person. Loosen tight clothing such as a collar, tie, belt or waistband. Get medical attention if symptoms appear. Section 5. Fire Fighting Measures Products of Combustion Fire Fighting Media and Instructions Fire Hazards Explosion Hazards SMALL FIRE: Use DRY chemical powder. LARGE FIRE: Use water spray, fog or foam. Do not use water jet. FLAMMABLE. Heated Containers may burst. Section 6. Accidental Release Measures Small Spill and Leak Large Spill and Leak Personal Protection in Case of a Large Spill Section 7. Handling and Storage Precautions Incompatibility Dilute with water and mop up, or absorb with an inert dry material and place in an appropriate waste disposal container. If necessary: Absorb with an inert material and put the spilled material in an appropriate waste disposal. Splash goggles. Full suit. Boots. Gloves. Keep away from heat. Keep away from sources of ignition. Empty containers pose a fire risk, evaporate the residue under a fume hood. Ground all equipment containing material. Do not ingest. Do not breathe gas/fumes/ vapor/spray. Wear suitable protective clothing. If ingested, seek medical advice immediately and show the container or the label. Avoid contact with skin and eyes. Keep away from incompatibles such as reducing agents, combustible materials. Reactive with reducing agents, combustible materials. Storage Keep container tightly closed. Keep container in a cool, well-ventilated area. Do not store above C (10 F). Section 8. Exposure Controls/Personal Protection Engineering Controls Good general ventilation should be sufficient to control airborne levels. Personal Protection Eyes Safety glasses. Body No special protective clothing is required. Respiratory A respirator is not needed under normal and intended conditions of product use. Hands Gloves. Protective Clothing (Pictograms) Exposure Limits See Section For Applicable Exposure Limits

3 Section 9. Physical and Chemical Properties Physical State and Appearance Molecular Weight ph Boiling/Condensation Point Melting/Freezing Point Critical Temperature Instability Temperature Specific Gravity Vapor Pressure Vapor Density Volatility VOC Evaporation Rate Liquid. Not applicable [Basic.] The lowest known value is 100 C (1 F) (Water). May start to solidify at 0 C (3 F) based on data for: Water (Water = 1) >53% By Weight <1 Odor Taste Color Lemon like. Clear. Dispersion Properties Solubility The Product is: Auto-ignition Temperature Flash Points Flammable Limits Fire Hazards in Presence of Various Substances Explosion Hazards in Presence of Various Substances See solubility in water, methanol, acetone. Easily soluble in cold water, hot water, methanol, acetone. FLAMMABLE. Highly flammable in presence of open flames, sparks and static discharge, of heat. Section 10. Stability and Reactivity Data Stability Incompatibility with Various Substances Hazardous Decomposition Products The product is stable. Reactive with reducing agents, combustible materials.

4 Section 11. Toxicological Information Routes of Entry Toxicity to Animals Dermal contact. Eye contact. Inhalation. Ingestion. Acute oral toxicity (LD50): mg/kg [Rat]. (Isopropyl Alcohol). Acute Effects on Humans Eyes Hazardous in case of eye contact (irritant). Chronic Effects on Humans Toxicity to Animals Chronic Effects on Humans Skin Sensitization of the product: Hazardous in case of skin contact (irritant). Skin inflammation is characterized by itching, scaling, reddening, or, occasionally, blistering. Inhalation May cause, headache, dizziness, and nausea Ingestion Harmful if swallowed. May aggravate existing respiratory conditions. May aggravate existing skin conditions. Section 1. Ecological Information Ecotoxicity BOD5 and COD Products of Toxicity of the Products of the Products of Section 13. Disposal Considerations Waste Information Waste Stream Type: Hazardous chemical waste. Location: not available Classification: not available Disposal.: Waste must be disposed of in accordance with federal, state and local environmental control regulations. Storage: not available Recycling: not available Section 14. Transport Information DOT (U.S.A) (Pictograms) TDG Classification. PIN UN, Proper Shipping Name, PG Classified ORM-D When Shipped By Ground This product is a Flammable Aerosol when Shipped By Air.

5 Maritime Transportation Special Provisions for Transport Section 15. Other Regulatory Information and Pictograms WHMIS (Classification) Regulatory Lists Other Regulations Class A: Compressed gas. Class B-1: Flammable gas. Class D-B: Material causing other toxic effects (TOXIC). No products were found. or of its ingredients Other Classifications HCS (U.S.A.) USA Regulatory Lists HCS Class: Flammable aerosol. HCS Class: Irritating substance. DSD (EEC) International Regulations Lists SARA 311/31 MSDS distribution - chemical inventory - hazard identification: Isopropyl Alcohol: Fire hazard This product is not classified according to the EU regulations. No products were found. Hazardous Material Information System (U.S.A.) Health Flammability Physical Hazard 3 0 National Fire Protection Association (U.S.A.) Health The Hazard Ranking systems presented on this MSDS provide only a quick reference for hazard information. The ENTIRE MSDS must be consulted to determine any specific hazards, First Aid measures, and PPE associated with this product. 3 0 Flammability Instability Specific Hazard Section 16. Other Information Validated by CRushton on 3//007. Verified by CRushton. Printed 3/3/007. Information Contact Notice to Reader Betco Corporation 1001 Brown Avenue Toledo, Ohio To the best of our knowledge, the information contained herein is accurate. However, neither the above named supplier nor any of its subsidiaries assumes any liability whatsoever for the accuracy or completeness of the information contained herein. Final determination of suitability of any material is the sole responsibility of the user. All materials may present unknown hazards and should be used with caution. Although certain hazards are described herein, we cannot guarantee that these are the only hazards that exist. Validated on 3//007. Continued on Next Page Glybet Surface and Air Page: 5/5