REACTOR E-10 Compact and Portable Plural-Component Proportioners

Size: px

Start display at page:

Download "REACTOR E-10 Compact and Portable Plural-Component Proportioners"

Marianna McKenzie
6 years ago
Views:

1 RETOR E-10 ompact and Portable Plural-omponent Proportioners PROVEN QULITY. LEDING TEHNOLOGY.

Small ready-to-use systems with big results! RETOR E-10 PROPORTIONERS Get in and get smaller jobs done fast without sacrificing performance.

With smart controls that are easy to setup and simple to operate, the E-10 is a natural complement to any proportioning equipment line-up.

joint filling and flooring applications Small tank spraying using cold spray polyurea Industrial maintenance Small size is ideal for on-site portability and

Saves 0% on material costs compared to disposable foam systems POWER-PKED WITH FETURES Makes even small jobs profitable 1 2 5 8 9 ELETRI POWER Low draw, plugs into

ESY ONTROLS Intuitive start, stop and digital temperature display with single knob operation PRESSURE LNE VLVES Quick and easy balancing of system pressures LNED

2 Small ready-to-use systems with big results! RETOR E-10 PROPORTIONERS Get in and get smaller jobs done fast without sacrificing performance. Graco s portable E-10 sprayers are ideal for pluralcomponent spray, joint-fill jobs and touchups. With smart controls that are easy to setup and simple to operate, the E-10 is a natural complement to any proportioning equipment line-up. Foam Insulation Rim Joists Roof patching Prep work Window repair High rise apartments dvanced Features in a Flexible Package oatings Small industrial jobs oncrete joint filling and flooring applications Small tank spraying using cold spray polyurea Industrial maintenance Small size is ideal for on-site portability and hard-to-reach areas One-person operation saves time and money Use as an add-on to your existing spray business Versatile switch from cold spray to hot spray to foam Saves 0% on material costs compared to disposable foam systems POWER-PKED WITH FETURES Makes even small jobs profitable ELETRI POWER Low draw, plugs into standard outlet. Operates almost anywhere! ESY ONTROLS Intuitive start, stop and digital temperature display with single knob operation PRESSURE LNE VLVES Quick and easy balancing of system pressures LNED PROPORTIONING Eliminates pressure fluctuations to give you a consistent spray pattern ESY-TO-SERVIE FLUID SETION Reduces maintenance and increases productivity ELETRI MOTOR Improves performance and reduces operating costs SELF-ONTINED TRNSLUENT MTERIL TNKS See that you are spraying on-ratio 2-WHEEL RT Easy to maneuver up and down stairs, wherever the job goes HETERS & HOSE Up to 2000 watts to pre-heat circulating material 8 Model

Selecting the Right Reactor E-10 System STEP ONE hoose your Reactor E-10 Unit based on your material requirements.

.............................. 120 Vac, with 2 separate, dedicated 15 circuits, 1 phase, 50/0 Hz 29802 2951.

............................. 20 Vac, with a single, dedicated 20 circuit, 1 phase, 50/0 Hz *Export unit 2 RETOR E-10 UNHETED UNIT Package

.............................. 120 Vac, with a single, dedicated 15 circuit, 1 phase, 50/0 Hz 29808 295.

OR WLL Use on-site power GENERTOR Use a generator for even greater flexibility.

air compressor to the Reactor E-10 s wattage requirements for your total wattage IR OMPRESSOR Required for proper gun operation and

D E 55 GLLON DRUMS Easily transfer material into 5 gallon pails or to the Reactor E-10 machine TRNSFER PILS Transport your material from a

3 Selecting the Right Reactor E-10 System STEP ONE hoose your Reactor E-10 Unit based on your material requirements. RETOR E-10 HETED UNIT Package units include: 5 feet of insulated hose bundled and a Fusion P gun with an W2222 mix chamber Vac, with 2 separate, dedicated 15 circuits, 1 phase, 50/0 Hz Vac, with 2 separate, dedicated 10 circuits, 1 phase, 50/0 Hz* Vac, with a single, dedicated 20 circuit, 1 phase, 50/0 Hz *Export unit 2 RETOR E-10 UNHETED UNIT Package units include: 5 feet of insulated hose bundled and a 2K Ultra-Lite gun with a joint fill and cold spray kit Vac, with a single, dedicated 15 circuit, 1 phase, 50/0 Hz Vac, with a single, dedicated 10 circuit, 1 phase, 50/0 Hz 2 STEP TWO STEP THREE Determine your power source. OR WLL Use on-site power GENERTOR Use a generator for even greater flexibility. Wattage requirements: Machine only: 5000 watts (heated unit) Electric air compressor heck the manufacturing power requirements and add the air compressor to the Reactor E-10 s wattage requirements for your total wattage IR OMPRESSOR Required for proper gun operation and activation Moving your material. Do you need an agitator or a feed pump? D E 55 GLLON DRUMS Easily transfer material into 5 gallon pails or to the Reactor E-10 machine TRNSFER PILS Transport your material from a bulk supply to the Reactor E-10 GITTOR gitate your resin for consistent coating DDITIONL HOSE SETIONS dditional hose is available in 5 feet increments for a maximum of 105 feet WSTE PILS Waste pails are used for startup and shutdown 2 E Readily vailable Power Source Determine what power is available in your location D Single dedicated 20amp, 20volt circuit 2 separate dedicated 15amp, 120volt circuits or 10amp, 20volt circuits

Setting new standards in flexible proportioning Portability, flexibility, precision and ease-of-use... the Reactor E-10 meets a wide range of flow and performance requirements.

4 Setting new standards in flexible proportioning Portability, flexibility, precision and ease-of-use... the Reactor E-10 meets a wide range of flow and performance requirements. Flow rates are based on a material viscosity of 0 cps. Flow Rate in lbs/min (kg/m) 0 (18.1) 0 (1.) 20 (9.1) 10 (.5) 0 E-10 E-20 E-0 H20/5 Model H20 Shown Pressure in PSI R00 R5252 R22 R2929 W2222 Graco Gusmer high performance proportioners HOW TO USE THIS HRT Select spray pressure Select mix chamber hoose Reactor model Note: Darker shading includes Reactor models shown in lighter shaded areas. EXMPLES Mix chamber: R2222 Pressure: 1500 psi Flow rate: 5 lbs/min Reactor E-10, E-20 and E-0 Mix chamber: R2929 Pressure: 1000 psi Flow rate: 8 lbs/min Reactor E-10, E-20 and E-0 Mix chamber: R22 Pressure: 1250 psi Flow rate: 12 lbs/min Reactor E-20 and E-0 MP unit FF100 E-10 E-20/E-0 E-XP1/E-XP2 H20/5 PRO PRESSURE / /500 psi (bar, MPa) (110, 11.0 ) (110, 11.0 ) (18, 1.8) (18, 1.8) (12, 1.2/21, 2.1) (18, 1.8/21, 2.1) FLOW RTE / 10/20 8/2 lb/min (kg/min) (.) (.) (5.) (8.2/15.) (.5/9.1) (1.2/11.0) HETER WTTGE N/ 5 Kw 100w heated 2000w Kw/10.2 Kw 10.2 Kw/15. Kw 12 Kw/18 Kw MP DRW Single Phase 0 amps See Tech Specs 8/8 amps 9/100 amps 100/ amps ( phase) WEIGHT 80/100 w/tanks /00 2/8 5 lbs (kg) (/5 w/tanks) () (2) (15/181) (155/199) () Technical Specifications Reactor E-10 Maximum fluid working pressure psi (10 bar, 1 MPa) Maximum fluid temperature o (8 o ) Maximum output lb/min (5. kg/min) at 0 cycles/min Output per cycle ( and ) gal (.01 l) Heater power 120V models W each; 100 W total 20V models W each; 2000 W total Sound power, per ISO d() at 2000 psi (10 bar, 1 MPa), 0. gpm (1.5 lpm) Tank capacity gal. (2.5 liters) each (nominal) Fluid outlets and returns / I.D. #5 JI 1/ I.D. # JI Fluid component markings Side Red Side lue Weight Heated units lb (2 kg) Unheated units lb (8 kg) Dimensions in. H x 2.5 in W x 0 in. D (112 cm H x cm W x cm D) Wetted parts luminum, stainless steel, carbon steel, brass, carbide, chrome, chemically resistant o-rings, PTFE, ultra-high molecular weight polyethylene Ordering Information E-10 Systems V, heated, 2 cord, 5 ft 5-hose bundle, P gun V, heated, 2 cord, 5 ft 5-hose bundle, P gun V, heated, 1 cord, 5 ft 5-hose bundle, P gun V, ambient, 5 ft -hose bundle, 2K Ultra-Lite gun, complete kit V, ambient, 5 ft -hose bundle, 2K Ultra-Lite gun, complete kit E-10 are Proportioners V heated, (2) 15 cords, 1,00 W V heated, (2) 10 cords, 2,000 W V heated, (1) 20 cord, 2,000 W V Unheated, (1) 15 cord V Unheated, (1) 10 cord Instruction manuals Displacement pump parts Fluid heater Fusion air purge spray gun Fusion mechanical purge spray gun K Ultra-Lite parts K Ultra-Lite cold spray and joint fill kits ir consumption Unheated joint fill units psi (0 bar, MPa) Unheated cold spray units psi (0 bar, MPa) Heated units with Fusion gun psi (0 bar, MPa) Power requirements* watts watts watts watts watts *When sizing the generator, make sure to consider all power requirements for the job Hose length Maximum feet (m) Minimum feet (10m) ccessories pplicator ssembly Fusion P gun, W2222 (with -hose manifold) Fusion MP gun, XF22/FTM8 (with -hose manifold) K Ultra-Lite complete valve kit (with cold spray and joint fill) 29 2K Ultra-Lite valve cold spray kit (complete, ready to spray) 295 2K Ultra-Lite valve joint fill kit (complete, ready to dispense) Hoses 2999 Five hose insulated (heated packages) with air, 5 ft (10. m) sections, 1/ in ( mm) 29 Three hose (unheated packages), with air, 5 ft (10. m) sections, 1/ in ( mm) Repair Kits 2985 ir filter/water separator kit Pump repair kit K restrictor outlet kit (front end for 2K bare valve) / I.D. x 2 spray disposable mixer (bag of 50) for both cold spray and joint fill units 1200 Spray mixer adapter kit, round pattern (bag of 5) 1200 ap, air spray, for mixer adapter (bag of 5) 295 Restrictor kit, 2K Ultra-Lite valve (mix of restrictors) for balancing pressures Hose, ISO, 5 ft., coupled Hose, resin, 5 ft., coupled 15G2 Hose, air, 5 ft., coupled 1199 E-10 desiccant dryer

5 RETOR E-10 OUT GRO PROVEN QULITY. LEDING TEHNOLOGY. Founded in 192, Graco is a world leader in fluid handling systems and components. Graco products move, measure, control, dispense and apply a wide range of fluids and viscous materials used in vehicle lubrication, commercial and industrial settings. The company s success is based on its unwavering commitment to technical excellence, world-class manufacturing and unparalleled customer service. Working closely with qualified distributors, Graco offers systems, products and technology which set the quality standard in a wide range of fluid handling solutions. Graco provides equipment for spray finishing, protective coating, paint circulation, lubrication, and dispensing sealants and adhesives, along with power application equipment for the contractor industry. Graco s ongoing investment in fluid management and control will continue to provide innovative solutions to a diverse global market. GRO HEDQURTERS MERIS MINNESOT Worldwide Headquarters Graco Inc th venue N.E. Minneapolis, MN 551 MILING DDRESS P.O. ox 11 Minneapolis, MN Tel Fax EUROPE ELGIUM European Headquarters Graco N.V. Industrieterrein - Oude unders Slakweidestraat 1 0 Maasmechelen, elgium Tel Fax SI PIFI JPN Graco K.K Hayabuchi Tsuzuki-ku Yokohama ity, Japan Tel Fax HIN Graco Hong Kong Ltd. Representative Office Room 118 1st Floor No. 2 Xin Yuan uilding No. 509 ao ao Road Shanghai, P.R.hina 2002 Tel Fax KORE Graco Korea Inc. hoheung ank uilding, th Floor #1599, Gwanyang-Dong, Dongan-Ku, nyang-si, Gyunggi-Do, Korea 1-00 Tel Fax all today for product information or to request a demonstration GRO ( ) or visit us at ll written and visual data contained in this document are based on the latest product information available at the time of publication. Graco reserves the right to make changes at any time without notice. Graco Inc. is registered to I.S. EN ISO 9001 Sales/Distribution/Service North merica Industrial ustomer Service FX Industrial Product Information/Demonstration 1-8-8GRO ( ) GRO IN. P.O. ox 11 Minneapolis, MN Graco Inc. 2 Rev. 8/05 Printed in U.S.. ll other brand names or marks are used for identification purposes and are trademarks of their respective owners.

REACTOR E-10. plural-component propor t i o n e r s

REACTOR E-10. plural-component propor t i o n e r s REACTOR E-10 plural-component propor t i o n e r s Small ready-to-use systems with big results! Get in and get smaller jobs done fast without sacrificing performance. Graco s portable E-10 sprayers are