PROflex* 60 Hz Reverse Osmosis Machines from 50 to 360 gpm

Transcription

1 Fact Sheet PROflex* 60 Hz Reverse Osmosis Machines from 50 to 60 gpm Flexible Design PROflex has 0 base configurations using 8 to 7 elements that allows user to choose various pumps and membrane element types to work for their specific situation and capex budget. -bank and -bank designs available Footprint is same for all models New design allows for wired devices, motor starters, disconnects, monitors, to be configured and easily customized on the Instrument panel and assembly Pump is in front of skid for easy access and maintenance. Piping is clean and simple allowing for easy modifications, as needed. Standard Features All PROflex machines come standard with the following features: UL/cUL Electrical Panel Primary and final pressure transmitters RO permeate flush on shutdown UL / cul Electrical Panel ph Meter on RO Feed Allen Bradley CompactLogix PLC Control Package Signet Control/Monitoring Package Instrumentation Flow Meters...Permeate & Concentrate Conductivity... Permeate & Feed Pressure... Pre & Post Cartridge Filter RO Feed, Pump Outlet, Inter-stage Concentrate & Permeate Pressure Transmitter... Pre & Post Elements Pressure Switch... Feed, Permeate, Concentrate ph... Feed Find a contact near you by visiting and clicking on Contact Us. * Trademark of General Electric Company; may be registered in one or more countries. 07, General Electric Company. All rights reserved. FSroPROflexNA_EN.docx May-7

2 Configurable Options Available Go to click on Resources then on RO Configurator for more details. Multiple Pump Options use the Configurator Tool to help select the pumps right for your application. Membrane Options: High Rejection Elements Low Energy Elements Nano Elements Motor Starters/Variable Frequency Drive: Mounted or shipped loose. Stainless Steel Upgrade options: Housings Low Pressure Piping Cartridge Filter Housing Recycle Banks by bank cleaning on two stage (S) systems 575V Motors NEMA 4X Control Panel Instrument Packages - Rosemount - E&H - No Instruments PRO NA Accessories PRO Multi-Media filters PRO Activated Carbon and Softeners PRO Clean-in-Place units PRO Chemical Feed Systems Transfer Pumps and Storage Tanks Operating Parameters Use Winflows as guide for specific rates and ranges with your machine. Design Recovery... 80% Design Temperature... 60ºF (6ºC) Operating Temperature Range5-85ºF (-9ºC) Nominal rejection % System Inlet Pressure PSI Recovery Rate can vary +/- 5% Materials of Construction High-pressure piping... 6 Stainless Steel, Sch. 0 Low-pressure piping... PVC, Sch. 80 Frame... Painted blue carbon steel Enclosure... Nema 4 Clamps/fittings... Zinc-plated Membrane Elements and Housings Membrane Model... AG8040F-400 Style... Spiral-wound elements Membrane type... TFC(Polyamide) Average membrane flux gfd Membrane rejection to 99.5% Membrane Element Manufacturer... GE Housing material... FRP or 6 Stainless Steel Housing Pressure Rating psi Housing Manufacturer... Codeline or Equal Flux can be reduced by using 440-sqft membranes. Cartridge Filtration Housing model... ROPV or Equal Housing material...frp Cartridge filter. -micron nominal, HF.Zs 0-40-FSB Page FSroPROflexNA_EN.docx

3 PROflex True flexibility to design a system you want PROflex offers the flexibility to choose a system that allows you to choose an aggressive or conservative design to meet the capital requirements of your specific situation. PROflex allows complete choice on arrays, number of elements, and pump sizes within each array. Figure shows the PROflex product line and the flow ranges. The flow ranges are the hydraulic limits with each model. Users should choose their RO system by determining:. Desired permeate flow range. Temperature of the water. Square footage of the membranes needed (or flux limits), per element 4. Desired Recovery. 5. Recycle, if any. Figure : PROflex flow ranges NOTE: The Pre-Configured Starting points in Figure give you a place to start, and are designs that we may have in stock. They show flow location using the base assumptions of: ) 60 F Feedwater temperature ) 400 sq. ft, elements AG Elements ) 80% RO recovery 4) * Pump shown in the charts below Use the Configurator Tool and Winflows to determine other designs that move you to different points in the bars above, for example: different elements, pumps, and recovery. These different points will allow you to see changes to the capital investment once makes and weighs with design considerations. Further, move left or right in above chart to further affect flux and capex spend. FSroPROflexNA_EN.docx Page

4 PROflex Stage (S) NA Models MODEL PROflex-8-S PROflex-0-S PROflex-6-S PROflex-54-S PROflex-7-S Permeate Rate : Concentrate Rate: Concentrate Recycle: Feed Rate: Model: Manufacturer: Quantity: Motor Power and type: Installed Power: Design Flow Rate: Design boost pressure: Membranes Quantity: Memb. Housing Style: Banking Arrangement: Housing Model: Housing Quantity: Cartridge Filter Model: Cartridge Filter Length: Cartridge Filter Qty: Inlet: Permeate: Concentrate: Inlet Water Pressure: Air Pressure: Drain to be Sized for: Power: Control Circuit Height: Width: Depth: Skid Shipping Weight Estimate Without Membranes: Membranes Shipping Weight Estimate: Operating Weight Estimate: 85 gpm (0 m /hr) gpm (5 m /hr) 06 gpm (4 m /hr) SS5 40 Hp (0 KW) TEFC 0 KW 06 gpm (4 m /hr) 40 psig (6 Bar) 8 HSG,HXHF0-.0V-FRP-A HF.Zs 0-40-FSB 40-inch (0 cm) per housing, /change out.0 flange.5 flange 06 gpm (4 m /hr) 0 VAC, -phase, 50 (7 cm) 57 lb (59 kg) 60 lb (57 kg) 40 gpm ( m /hr) 5 gpm (8 m /hr) 75 gpm (40 m /hr) SS gpm (40 m /hr) 5 psig (6 Bar) 0 HSG,HXHF0-.0V-FRP-A HF.Zs 0-40-FSB 40-inch (0 cm) per housing, /change out.5 flange 75 gpm (40 m /hr) 0 VAC, -phase, 50 (7 cm) 57 lb (59 kg) 60 lb (57 kg) 70 gpm (8 m /hr) 4 gpm (0 m /hr) gpm (49 m /hr) SS4009 gpm (4 m /hr) 40 psig (6 Bar) 6 4 HSG,HXHF0-.0V-FRP-A HF.Zs 0-40-FSB 40-inch (0 cm) per housing, /change out.5 flange gpm (49 m /hr) 0 VAC, -phase, 50 (7 cm) 57 lb (59 kg) 60 lb (57 kg) 55 gpm (59 m /hr) 64 gpm (5 m /hr) 9 gpm (7 m /hr) 75 Hp () TEFC 9 gpm (7 m /hr) 40 psig (6 Bar) 54 6 HSG,HXHF0-.0V-FRP-A HF.Zs 0-40-FSB 40-inch (0 cm) per housing, /change out.0 flange 9 gpm (7 m /hr) 0 VAC, -phase, 50 (7 cm) 57 lb (59 kg) 60 lb (57 kg) 40 gpm (78 m /hr) 85 gpm (0 m /hr) 45 gpm (98 m /hr) 75 Hp () TEFC 45 gpm (98 m /hr) 5 psig (6 Bar) 7 84 HSG,HXHF0-.0V-FRP-A HF.Zs 0-40-FSB 40-inch (0 cm) per housing, /change out.0 flange 45 gpm (98 m /hr) 0 VAC, -phase, 50 (7 cm) 57 lb (59 kg) 60 lb (57 kg) Permeate ranges are stated at the following design conditions: 500 ppm TDS, 80% recovery, 60F, pump listed, and using 400 ft AG elements. Your flow rate will vary greatly as you change temperature, elements and pump sizes and TDS levels. Consult GE or Winflows for flows expected with your feed water conditions. Recycle Rate will vary with flux and feedwater conditions. When to use recycle will depend on the tradeoff user wants to make between permeate quality and membrane element life/frequency of cleaning. The base S models do not come with recycle but there is an option to add recycle in the configurator. Page 4 FSroPROflexNA_EN.docx

5 PROflex Stage (S) NA Models MODEL PROflex-4-S PROflex-6-S PROflex-4-S PROflex-54-S PROflex-7-S Permeate Rate : Concentrate Rate: Concentrate Recycle: Feed Rate: 00 gpm ( m/hr) 5 gpm (6 m/hr) 5 gpm (9 m/hr) 60 gpm (7 m /hr) 40 gpm (9 m /hr) 00 gpm (46 m /hr) 90 gpm (44 m /hr) 48 gpm ( m /hr) 8 gpm (55 m /hr) 5 gpm (5 m /hr) 56 gpm ( m /hr) 8 gpm (65 m /hr) 5 gpm (7 m /hr) 79 gpm (8 m /hr) 94 gpm (9 m /hr) Model: Manufacturer: Quantity: Motor Power and type: Installed Power: Design Flow Rate: Design boost pressure: SS5 40 Hp (0 KW) TEFC 0 KW 5 gpm (9 m/hr) 40 psig (6 Bar) SS gpm (46 m /hr) 50 psig (7 Bar) AS00 8 gpm (55 m /hr) 60 psig (8 Bar) AS00 8 gpm (65 m /hr) 40 psig (6 Bar) 75 Hp () TEFC 94 gpm (9 m /hr) 50 psig (7 Bar) Membranes Quantity: Memb. Housing Style: Banking Arrangement: Housing Model: Housing Quantity: Cartridge Filter Model: Cartridge Filter Length: Cartridge Filter Qty: HSG,HXHF0-.0V-FRP-A HF.Zs 0-40-FSB 40-inch (0 cm) per housing, /change out HSG,HXHF0-.0V-FRP-A HF.Zs 0-40-FSB 40-inch (0 cm) per housing, /change out HSG,HXHF0-.0V-FRP-A HF.Zs 0-40-FSB 40-inch (0 cm) per housing, /change out HSG,HXHF0-.0V-FRP-A HF.Zs 0-40-FSB 40-inch (0 cm) per housing, /change out HSG,HXHF0-.0V-FRP-A HF.Zs 0-40-FSB 40-inch (0 cm) per housing, /change out Inlet: Permeate: Concentrate: Inlet Water Pressure: Air Pressure: Drain to be Sized for: Power: Control Circuit.5 flange 5 gpm (9 m/hr) VAC, - phase, 0 VAC, -phase,.5 flange 00 gpm (46 m /hr) 0 VAC, -phase,.5 flange 8 gpm (55 m /hr) 0 VAC, -phase,.0 flange 8 gpm (65 m /hr) 0 VAC, -phase,.0 flange 94 gpm (9 m /hr) 0 VAC, -phase, Height: Width: Depth: Skid Shipping Weight Estimate Without Membranes: Membranes Shipping Weight Estimate: Operating Weight Estimate: 50 (7 cm) 57 lb (59 kg) 60 lb (57 kg) 50 (7 cm) 57 lb (59 kg) 60 lb (57 kg) 50 (7 cm) 57 lb (59 kg) 60 lb (57 kg) 50 (7 cm) 57 lb (59 kg) 60 lb (57 kg) 50 (7 cm) 57 lb (59 kg) 60 lb (57 kg) Permeate ranges are stated at the following design conditions: 500 ppm TDS, 80% recovery, 60F, pump listed, and using 400 ft AG elements. Your flow rate will vary greatly as you change temperature, elements and pump sizes and TDS levels. Consult GE or Winflows for flows expected with your feed water conditions. Recycle Rate will vary with flux and feedwater conditions. When to use recycle will depend on the tradeoff user wants to make between permeate quality and membrane element life/frequency of cleaning. The base S models do not come with recycle but there is an option to add recycle in the configurator. FSroPROflexNA_EN.docx Page 5