Pr ocess Filtr ation. Filtration Products For Industrial Applications

Transcription

1 Pr ocess Filtr ation Filtration Products For Industrial Applications

2 Index Introduction Product Line Overview...5 MEMBRANE FILTERS Fluoroflow Cartridges... Proflow II G Cartridges... 5 Clariflow G Cartridges... 7 Clariflow WS Cartridges... 9 PLEATED FILTERS Abso-Mate Cartridges... PolyMate Plus Cartridges... PolyMate Cartridges... 5 Claripor Cartrdiges... 9 Glass-Mate Cartridges... Fulflo PCC Cartridges... 5 Fulflo Pleated Cartridges... 7 Fulflo Pleated Cartridges... 9 Flo-Pac Pleated Cartridiges... Flo-Pac Plus Pleated Cartridges... LARGE DIAMETER PLEATED FILTERS Mega-Flow... 7 Mega-Flow Plus... 9 MaxGuard... 5 ParMax... 5 MELT BLOWN, RESIN BONDED AND WOUND DEPTH FILTER CARTRIDGES SERIES MegaBond Plus Avasan Ecobond... Durabond... Probond... 5 Honeycomb HFT... 7 SWC... 7 XTL FILTER BAG MEDIA AND STRAINER SERIES Fulflo Filter Bags Fulflo XLH Filter Bags Fulflo Retainer Basket... 8 Fulflo Basket Strainer... 8 SORBENT MEDIA SERIES Trubind Trubind Trubind Fulflo Activated Carbon Cartridges... 9 METALLIC MEDIA SERIES Fulflo Metallic Filter Cartridges SINGLE CARTRIDGE FILTER VESSEL SERIES Fulflo B Series Vessels... Fulflo BSSB Series Vessels... Fulflo SSTC Series Vessels... 5 Fulflo.5 C Vessels... 7 Fulflo M Series Vessels... 9 Fulflo LT Series Vessels... Fulflo NP Series Vessels... MULTI-CARTRIDGE FILTER VESSEL SERIES Fulflo WH Filter Vessels...7 Fulflo CH5 Filter Vessels...9 Fulflo SF Filter Vessels... Fulflo HT Filter Vessels... Fulflo S Filter Vessels... 5 Fulflo MP Filter Vessels... 7 Fulflo Mega Flow Filter Vessels... Fulflo FE Filter Vessels... Fulflo FP Filter Vessels... 5 Fulflo CPM Filter Vessels... 7 Fulflo P Filter Vessels... 9 BAG FILTER VESSELS SERIES Fulflo SB Filter Vessels... Fulflo FB Filter Vessels... 5 Fulflo CB Filter Vessels... 7

3

4 Process Filtration products Tailored to Industrial Applications Product line MEMBRANE FILTERS Filter Ratings (microns) Housings Available Typical Applications fluoroflow.5 to Yes High purity aggressive chemicals proflow II G.5 to Yes UHP - chemicals, solvents, rinse baths and gases clariflow G. to.5 Yes Specialty chemicals UHP water clariflow ws. to.5 Yes Pre-R.O. and post-r.o. PLEATED FILTERS Abso-Mate TM Pab. to 7 Yes Membrane prefiltration chemicals Waste water Poly-Mate TM Plus PMP.5 to Yes Chemicals, magnetic media, photographic, electronics DI water, Process water Poly-Mate TM PM/PXD.5 to Yes Photographic High-tech coatings DI water and R.O. membrane prefiltration Process water, wastewater and disposal wells Claripor TM cp.5 to 9 Yes Coatings, inkjet inks Specialty chemicals GlasS-Mate TM PMG.5 to Yes R.O. prefiltration Membrane prefiltration Critical lubricating oils and oil field completion fluids Fulflo PCC to Yes Chemicals and oil field completion fluids Metal treatment Petroleum and process gases Coatings Process water Fulflo Pleated to 5 No Petrochemicals, refineries & oil fields, amines, glycols, produced water Fulflo to No Water injection Chemical processes Hydrocarbons Solvents Flo-Pac FP.5 to Yes Hydraulic and lubricating oils Coolants - water-soluble, fuels and non-food-grade liquids Flo-Pac + FPE.5 to Yes Glycols, amines, esters, ketones, aromatic & aliphatic hydrocarbons, halogenated hydrocarbons LARGE DIAMETER PLEATED FILTERS MEGAFLOW MFN.5 to Yes DI Water Chemical processing High-tech coatings MegaFlow TM + mfa to 7, 5 Yes Potable water Coolants MaxGuard TM mx.5 to No Oil Field - deep well injection, produced water PARMAX TM rcp, RMG to 9 Yes Specialty chemicals Process Water 7

5 Product line Filter ratings (microns) Available Housings Typical applications MELT BLOWN Megabond Plus MBP to Yes Chemical processing DI water Coatings Avasan TM AVS to 75 Yes DI and process water R.O. prefiltration Durabond DBC to Yes Chemical processing Magnetic and industrial coatings R.O. prefiltration, DI water and organic solvents Ecobond EBC to 5 Yes Chemical processing Magnetic and industrial coatings R.O. prefiltration, DI water and organic solvents Oil field applications RESIN BONDED Probond PRO to 5 Yes Inks and paints Viscous fluids - adhesives, resins and emulsions, plasticizers WOUND DEPTH Honeycomb HFT to 5 Yes Organic acids and solvents, petroleum oils, prefilter for membranes, concentrated and diluted alkalies, water, chemical processes ULTRAFINE HFT.5 Yes Organic acids and solvents, petroleum oils, prefilter for membranes, concentrated and diluted alkalies, water, chemical processes XTL TM to Yes Chemical processes R.O prefiltration and process water Lubricants Organic solvents and amines SWC to Yes Organic Acids and Solvents Petroleum Oils Prefilter for Membranes - concentrated and diluted alkalies, water and chemical processes FILTER BAG MEDIA Fulflo Filter Bags to 8 Yes Paints, inks and coatings Bulk chemicals and resins Prefilter to other cartridges XLH.5 to 5 Yes Paints, inks and coatings Adhesives and resins Bulk chemicals Prefilter to other cartridges Fulflo Basket Strainers to Mesh Yes Clarification at high pressure, temperature, or with highviscosity fluids Filtration of steam and aggressive gases Fulflo Coaxial Retainer Basket N/A Yes Clarification at high pressure, temperature, or with highviscosity fluids Filtration of steam and aggressive gases CARTRIDGE SERIES TruBind,, 7 Trace Oil Yes Removes trace oil from water Absorbent Fulflo AcTIvated Carbon 5 micron prefilter Yes Chlorine removal Organics removal METALIC ELEMENT SERIES Fulflo Metallic to 8 Yes High-temperature liquids and steam Specifications are subject to change without notification. 7 Parker Hannifin Corporation. Advantage, Evadur, Poly-Mate, Glas-Mate, Claripor, Abso-mate, Megaflow, Maxguard, Honeycomb, Megabondplus, Durabond, Ecobond and Parmax are trademarks of Parker Hannifin Corporation. Fulfo, Flo-Pac and Probond are registered trademarks of Parker Hannifin Corporation. Indus line Rev A /7 8

6 Membrane Filter Cartridge Series

7

8 Fluoroflow Cartridges All-fluoropolymer cartridge for effective filtration of aggressive chemicals Fluoroflow pleated filter cartridges feature an all-fluoropolymer construction; this provides the highest chemical resistance when filtering acids, bases and solvents. Fluoroflow cartridges fit standard filter housings and are available in a variety of filter ratings, lengths and end-fittings for maximum versatility. Fluoroflow cartridges are available flushed with UPW to minimize extractables and wet-packed to eliminate the need for on-site wetting, to fit your needs. The Fluorflow Cartridge is available in.5,.,.,.5, and µm pore sizes. Benefits High chemical compatibility maximizes process capability Wet-packed option eliminates lengthy wetting procedure and minimizes equipment downtime Biosafe in accordance with USP Class VI C Plastics Test Applications Aggressive chemicals and process fluids at temperatures up to 5 C Ozonated and/or hot UPW

9 Fluoroflow Specifications Materials of Construction % Fluoropolymer construction Effective Filtration Area.8ft (.m ) per nominal (5mm) cartridge Metals Extractables <ppb (total) in a % HNO extraction of.5 liters for hours at ambient temperature Performance Attributes Water in Flow rates, Typical *.5µm.9gpm/psid (.9lpm/mbar).µm.gpm/psid (.7lpm/mbar).µm.gpm/psid (7.lpm/mbar).5µm.7gpm/psid (5.8lpm/mbar).µm.7gpm/psid (.9lpm/mbar) * Per -inch (5 mm) cartrdige equivalent and for fluids with viscosity of cp. Integrity test values Filter Rating Bubble Point* µm psig bar * In / 5 C Maximum Differential Pressure Forward: 8psid 75ºF (ºC) 55psid 7ºF (75ºC) psid 57ºF (5ºC) 5psid ºF (5ºC) Reverse: 5psid 75ºF (ºC) 5psid 5ºF (ºC) Cleanliness (particle shedding) Wet-packed < particles/ml >.µm after 7gal at gpm TOC/Resistivity Rinse-up (wet-packed) TOC recovery within -5ppb of feed without additional rinse-up. Resistivity recovery within.megohmcm of feed after gpm Differential Pressure (psid) 7 5 -inch (5 mm) Cartridge Water Flow Rate (lpm) 8.5µm.µm.µm.5µm.µm 5 Water Flow Rate (gpm) Differential Pressure (mbar) Ordering Information E 7 8 End Fitting DESCRIPTION /Flat /Flat /Fin /Fin Nominal Length Filter Rating O-Rings Options LENGTH (mm) (5mm) (5mm) (75mm) mm) 95 5 MICRON.5µm.µm.µm.5µm µm (Nominal) 5 7 N MATERIAL Silicone Viton FEP-Encapsulated Viton FEP-Encapsulated Silicone Chemraz None Blank F W TREATMENT UPW Flush Ozone UPW Flush Wet Packed Specifications are subject to change without notification. *Viton is a registered trademark of E.I. DuPont de Nemours & Co., Inc. *Fluoroflow is a registered trademark of Parker Hannifin Corp. 8 Parker Hannafin Process Advanced Filtration Inc. All Rights Reserved SPEC--Rev. A /8

10 5 Proflow II General Grade Cartridges Hydrophobic PTFE membrane for general purpose gas and solvent purification Proflow II General grade cartridges provide an economic alternative for general applications where reliable gas and liquid flow rates are required. With 5. square feet of expanded PTFE membrane, Proflow II-G is a highly efficient hydrophobic barrier, for the production of dry gas, and will effectively purify aggressive liquids and organic solvents. Proflow II-G cartridges are manufactured under cleanroom conditions and integrity tested before shipment to assure consistent performance and quality. The Proflow II-G Cartridges are available in.5,.,.,.5, and.µm pore sizes. Benefits Reliable air and liquid flow rates for effective performance Broad chemical compatibility enables use in many applications Broad range of micron ratings for user convenience Superior hydrophobicity for long life in vent/air applications Integrity tested to ensure quality Biosafe in accordance with USP Class VI C Plastics Test Applications Photoresists Compressed gas Venting Electronic grade solvents Hot deionized water (less than 8 C) 5

11 Proflow II General Grade Specifications Materials of Construction Membrane: PTFE Support Layers: Polypropylene Structure: Polypropylene Effective Filtration Area 5.ft (.5m ) per (5mm) cartridge Performance Attributes Water in Flow rates, Typical *.5µm.gpm/psid (.9lpm/mbar).µm.gpm/psid (.59lpm/mbar).µm.5gpm/psid (.7lpm/mbar).5µm 5.gpm/psid (8.lpm/mbar).µm.gpm/psid (.lpm/mbar) * Per -inch (5 mm) cartrdige equivalent and for fluids with viscosity of cp. Integrity test values Filter Rating Bubble Point* µm psig bar * In / 5 C Maximum Differential Pressure/ Temperature Forward: 8psid 75ºF (ºC) psid 8ºF (8ºC) Reverse: 5psid 75ºF (ºC) Cleanliness (particle shedding) Wet-packed < particles/ml >.µm after gal at gpm Data is from open bag and installed, no additional installation flushing. TOC/Resistivity Rinse-up (wet-packed) TOC rinse-up to background plus 5 ppb of feed after 7 gpm. Resistivity rinse-up to background minus. megohm-cm of feed after gpm. Differential Pressure (psid) 5 -inch (5mm) Cartridge Water Flow Rate (lpm) 8.5µm.µm.µm.5µm.µm 5 5 Differential Pressure (mbar) 5 Water Flow Rate (gpm) Ordering Information G Application Insert Style End Fitting Nominal Length Filter Rating O-Rings Gaskets TREATMENT Standard Flushed with 8 Megohm DI Water 5 A DESCRIPTION No Insert (Standard) Encapsulated Stainless Steel Encapsulated Polysulfone / Shortened on Fitting 7 8 G H R DESCRIPTION DOE (Cuno ) DOE /Flat /Flat /Internal/Flat /Fin /Fin /Internal/ Recessed End cap /Recessed Endcap (Ametek) /Recessed End cap LENGTH (5mm) (5mm) (75mm) mm) 95 MICRON.5µm.µm.µm.5µm.µm 5* * N MATERIAL Buna N EPDM Silicone Viton FEP-Encapsulated Viton FEP-Encapsulated Silicone None N THICKNESS. (5mm).5 (mm) (). (5mm) & ().5 (mm) No Gasket Specifications are subject to change without notification. *Viton is a registered trademark of E.I. DuPont de Nemours & Co., Inc. Proflow is a registered trademark of Parker Hannifin Corp. 8 Parker Hannafin Process Advanced Filtration Inc. All Rights Reserved SPEC-5-Rev. A /8

12 Clariflow General Grade Cartridges Hydrophilic Polyethersulfone (PES) membrane for aqueous liquid filtration applications Clariflow General grade cartridges are designed for general-purpose use in the filtration of high-purity liquids and aqueous chemicals. The mirrored-anisotropic Polyethersulfone (PES) membrane is inherently hydrophilic and has a pore morphology that delivers exceptionally high flow rates. Because there are no added surfactants or wetting agents, and the support layers and structure are all-polypropylene, the filter exhibits low extractables, broad chemical compatibility and good resistance to hydrolysis. The Clariflow General Grade Cartridge is available in.,.,.,.5,.5 and.8µm pore sizes. Benefits High flow rate reduces processing time Broad chemical compatibility allows use in most applications Low differential pressure reduces system wear and tear Biosafe in accordance with USP Class VI C Plastics Test Applications Chemical filtration Liquid clarification Recirculating fluids General use water filtration Deionized water systems 7

13 Clariflow General Grade Specifications Materials of Construction Membrane: Polyethersulfone Support layers: Polypropylene Structural: Polypropylene Effective Filtration Area.8 ft (. m ) per (5mm) cartridge Maximum Differential Pressure/ Temperature Forward: 8 psid (5.5 bar) at 75 F ( C) psid (.8 bar) at 8 F (8 C) Reverse: 5 psid (. bar) at 75 F ( C) Performance Attributes Water in Flow rates, Typical *.µm.gpm/psid (5.9lpm/mbar).µm.8gpm/psid (9.88lpm/mbar).µm.7gpm/psid (.lpm/mbar).5µm.8gpm/psid (.5lpm/mbar).5µm 9.gpm/psid (5.5lpm/mbar).8µm 9.5gpm/psid (5.lpm/mbar) * Per -inch (5 mm) cartrdige equivalent and for fluids with viscosity of cp. Differential Pressure (psid) 5 -inch (5mm) cartridge Water Flow Rate (lpm) 8. m. m Water Flow Rate (gpm). m.5 m.5 &.8 m 8 Differential Pressure (mbar) Ordering Information 5 G 7 8 End Fitting DESCRIPTION DOE (CUNO) DOE /Flat /Flat /Internal/Flat /Fin /Fin Nominal Length Filter Rating Gasket/O-Rings Thickness (Gasket Only) LENGTH (5mm) (5mm) (75mm) mm) 9 8 MICRON.µm.µm.µm.5µm.5µm.8µm 5* * N *O-Rings only MATERIAL Buna N EPDM (Standard) Silicone Viton FEP-Encapsulated Viton FEP-Encapsulated Silicone None N MATERIAL. (5mm).5 (mm) (). (5mm) & ().5 (mm) No Gasket Specifications are subject to change without notification. Clariflow is a registered trademark of Parker Hannifin Corporation. *Vilton is a registered trademark of E.I. DuPont de Nemours & Co., Inc. Cuno is a registered trademark of Cuno Inc. 8 Parker Hannafin Process Advanced Filtration Inc. All Rights Reserved SPEC--Rev. A /8 8

14 Clariflow WS Cartridges Hydrophilic Polyethersulfone (PES) membrane for costeffective purification Clariflow WS cartridges are costeffective alternatives to Clariflow Electronics and General grade cartridges for the filtration of a variety of aqueous liquids. The Clariflow WS cartridge is built around a unique polyethersulfone (PES) membrane that is inherently hydrophilic, and contains no added surfactants or wetting agents. As such, it is known for clean filtrates, and also offers competitive flow rates, extended service life, and excellent resistance to hydrolysis. Clariflow WS cartridges are fabricated under cleanroom conditions. The Clariflow WS Cartridge is available in.,.,.,.5, and.5µm cartridges. Benefits reliable and cost-effective to reduce expenses Broad chemical compatibility allows use in aqueous applications Resistance to hydrolysis allows extended use in UPW systems High flow rate / low differential pressure reduces system wear and tear Biosafe in accordance with USP Class VI C Plastics Test Applications deionized water filtration chemical filtration Liquid clarification recirculating liquids wine and beer clarification Juices Bottled water 9

15 Clariflow WS Specifications Materials of Construction Membrane: Polyethersulfone Support Layers: Polypropylene Structure: Polypropylene Performance Attributes Water in Flow rates, Typical *.µm.7gpm/psid (.8lpm/mbar).µm.gpm/psid (7.lpm/mbar).µm.gpm/psid (.7lpm/mbar).5µm.8gpm/psid (.8lpm/mbar) * Per -inch (5 mm) cartrdige equivalent and for fluids with viscosity of cp. Effective Filtration Area 5.ft (.5m ) per (5mm) cartridge Maximum Differential Pressure Forward: 8psid 75ºF (ºC) psid 8ºF (8ºC) Reverse: 5psid 75ºF (ºC) Bulk Packaging Bulk packaged in case quantities to reduce material disposal 8 per carton per carton per carton 9 per carton Differential Pressure (psid) 5 -inch (5mm) Cartridges Water Flow Rate (lpm) 8.µm.µm.µm.5µm Differential Pressure (mbar) 8 Water Flow Rate (gpm) Ordering Information 5 WS 5 A Insert Style DESCRIPTION No Insert (Standard) Encapsulated 5 SS Insert Encapsulated Polysulfone Insert / Shortened on Fitting 7 8 G H R End Fittings DESCRIPTION DOE (Cuno ) DOE /Flat /Flat /Internal/Flat /Fin /Fin /Internal/ Recessed End cap /Recessed Endcap (Ametek) /Recessed End cap Nominal Length Filter Rating Gasket/O-Rings Thickness LENGTH MICRON (Gaskets Only) (5mm) 9.µm (5mm).µm (75mm).µm mm).5µm.5µm 5* * N *O-rings only MATERIAL Buna N EPDM Silicone Viton Encapsulated Viton Encapsulated Silicone None N THICKNESS. (5mm).5 (mm) (). (5mm) & ().5 (mm) No Gasket Specifications are subject to change without notification. *Viton is a registered trademark of E.I. DuPont de Nemours & Co., Inc. Clariflow is a registered trademark of Parker Hannifin Corp. 8 Parker Hannafin Process Advanced Filtration Inc. All Rights Reserved SPEC--Rev. A /8