======================================================================= Copyright, 1997, 3M Canada Company. All rights reserved.

Transcription

1 3M Canada Company 1840 Oxford Street East, Post Office Box 5757 London, Ontario N6A 4T1 Medical Emergency Telephone: (519) , Ext Transportation Emergency Telephone (CANUTEC): (613) ======================================================================= Material Safety Data Sheet ======================================================================= Document id : Issue date : 2015/04/17 Version : Supersedes date : 2013/10/28 Copyright, 1997, 3M Canada Company. All rights reserved. Copying and/or downloading of this information for the purpose of properly utilizing 3M products is allowed provided that: (1) the information is copied in full with no changes unless prior written agreement is obtained from 3M, and (2) neither the copy nor the original is resold or otherwise distributed with the intention of earning a profit thereon. Prepared by: Corporate Regulatory Services, 3M Canada Company Telephone: (800) , Fax: (800) , Web Site: 1 Chemical Product and Company Identification

2 Tradename: SCOTCH-WELD(TM) EPOXY ADHESIVE DP-100 NS, TRANSLUCENT Product ID: H Intended Use of Product: Epoxy Adhesive Kit component(s): SCOTCH-WELD(TM) EPOXY ADHESIVE DP-100 NS, TRANSLUCENT (PART A) SCOTCH-WELD(TM) EPOXY ADHESIVE DP-100 NS, TRANSLUCENT (PART B) Division: INDUSTRIAL ADHESIVES AND TAPES

3 3M Canada Company 1840 Oxford Street East, Post Office Box 5757 London, Ontario N6A 4T1 Medical Emergency Telephone: (519) , Ext Transportation Emergency Telephone (CANUTEC): (613) ======================================================================= Material Safety Data Sheet ======================================================================= Document id : Issue date : 2015/04/17 Version : Supersedes date : 2013/10/28 Copyright, 1997, 3M Canada Company. All rights reserved. Copying and/or downloading of this information for the purpose of properly utilizing 3M products is allowed provided that: (1) the information is copied in full with no changes unless prior written agreement is obtained from 3M, and (2) neither the copy nor the original is resold or otherwise distributed with the intention of earning a profit thereon. Prepared by: Corporate Regulatory Services, 3M Canada Company Telephone: (800) , Fax: (800) , Web Site:

4 1 Chemical Product and Company Identification Tradename: SCOTCH-WELD(TM) EPOXY ADHESIVE DP-100 NS, TRANSLUCENT (PART B) Product ID: Intended Use of Product: Structural adhesive Division: INDUSTRIAL ADHESIVES AND TAPES 2 Hazards Identification Critical Hazards: Moderate Eye Irritation: Signs/symptoms may include redness, swelling, pain, tearing, and blurred or hazy vision. Mild Skin Irritation: Signs/symptoms may include localized redness, swelling, itching, and dryness. Allergic Skin Reaction (non-photo induced): Signs/symptoms may include redness, swelling, blistering, and itching. See Sections 7 and 11 for further information.

5 SCOTCH-WELD(TM) EPOXY ADHESIVE DP-100 NS, Page 2 of 9 TRANSLUCENT (PART B) 3 Composition/Information on Ingredients Ingredient Name CAS Number Percentage EPOXY RESIN EPOXY RESIN AMORPHOUS SILICA NOTE: Each percentage is expressed as the ratio of the weight of the ingredient to the weight of the controlled product. 4 First Aid Measures Instructions for Eye Contact: Flush with large amounts of water. Remove contact lenses if easy to do. Continue rinsing. If signs/symptoms persist, get medical attention. Instructions for Skin Contact: Immediately wash with soap and water. Remove contaminated clothing and wash before reuse. If signs/symptoms develop, get medical attention.

6 Instructions for Inhalation: Remove person to fresh air. If you feel unwell, get medical attention. Instructions for Ingestion: Rinse mouth. If you feel unwell, get medical attention. Special Instructions: Not applicable 5 Fire Fighting Measures Flash point: Lower Explosive Limit (%): Upper Explosive Limit (%): Autoignition temperature: >= 240 C Estimated Not applicable Not applicable Not Available Suitable Extinguishing Media: In case of fire: Use a fire fighting agent suitable for ordinary combustible material such as water or foam to extinguish. Exposure Hazards during Fire: Combustion Products from Fire: Aldehydes - During Combustion; Carbon monoxide - During Combustion; Carbon dioxide - During Combustion; Ketones - During Combustion;

7 SCOTCH-WELD(TM) EPOXY ADHESIVE DP-100 NS, Page 3 of 9 TRANSLUCENT (PART B) Unusual Fire and Explosion Hazards None inherent in this product. Fire Fighting Procedures: No unusual fire or explosion hazards are anticipated. Evacuate area. NFPA: Health 2 NFPA: Fire 1 NFPA: Reactivity 1 NFPA: Unusual Reaction Hazard none National Fire Protection Association (NFPA) hazard ratings are designed for use by emergency response personnel to address the hazards that are presented by short-term, acute exposure to a material under conditions of fire, spill, or similar emergencies. Hazard ratings are primarily based on the inherent physical and toxic properties of the material but also include the toxic properties of combustion or decomposition products that are known to be generated in significant quantities. 6 Accidental Release Measures Personal Precautions: Ventilate the area with fresh air.

8 For large spill, or spills in confined spaces, provide mechanical ventilation to disperse or exhaust vapors, in accordance with good industrial hygiene practice. Warning! A motor could be an ignition source and could cause flammable gases or vapors in the spill area to burn or explode. Refer to other sections of this MSDS for information regarding physical and health hazards, respiratory protection, ventilation, and personal protective equipment. Environmental Procedures For larger spills, cover drains and build dikes to prevent entry into sewer systems or bodies of water. Methods for cleaning up Contain spill. Working from around the edges of the spill inward, cover with bentonite, vermiculite, or commercially available inorganic absorbent material. Mix in sufficient absorbent until it appears dry. Remember, adding an absorbent material does not remove a physical, health, or environmental hazard. Collect as much of the spilled material as possible. Place in a closed container approved for transportation by appropriate authorities. Clean up residue with an appropriate solvent selected by a qualified and authorized person. Ventilate the area with fresh air. Read and follow safety precautions on the solvent label and

9 SCOTCH-WELD(TM) EPOXY ADHESIVE DP-100 NS, Page 4 of 9 TRANSLUCENT (PART B) MSDS. Seal the container. Dispose of collected material as soon as possible. 7 Handling and Storage Storage Requirements: Incompatible Materials: Store away from acids; Store away from oxidizing agents. Ventilation: Explosion Prevention: Avoid contact with oxidizing agents (eg. chlorine, chromic acid etc.) Use Instructions: Avoid breathing dust/fume/gas/mist/vapours/spray. Do not get in eyes, on skin, or on clothing. Do not eat, drink or smoke when using this product. Wash thoroughly after handling. Contaminated work clothing should not be allowed out of the workplace.

10 Avoid release to the environment. Wash contaminated clothing before reuse. 8 Exposure Controls/Personal Protection Personal Protection Eye Protection: The following should be worn alone or in combination, as appropriate, to prevent eye contact: Indirect vented goggles; Hand Protection: The following glove material(s) are recommended: butyl rubber; Skin Protection: Select and use gloves and/or protective clothing to prevent skin contact based on the results of an exposure assessment. Consult with your glove and/or protective clothing manufacturer for selection of appropriate compatible materials. The following protective clothing material(s) are recommended: Apron - Butyl rubber Respiratory Protection: Select one of the following approved respirators based on airborne

11 SCOTCH-WELD(TM) EPOXY ADHESIVE DP-100 NS, Page 5 of 9 TRANSLUCENT (PART B) concentration of contaminants and in accordance with regulations: Half facepiece or fullface air-purifying respirator with organic vapor cartridges and P95 particulate prefilters Ingestion (Prevention): Recommended Ventilation: Use general dilution ventilation and/or local exhaust ventilation to control airborne exposures to below relevant Exposure Limits and/or control dust/fume/gas/mist/vapors/spray. If ventilation is not adequate, use respiratory protection equipment. Ingredient Exposure Data EPOXY RESIN ( ) LD50 (rat, oral) LD50 (dermal, rabbit) mg/kg 23.4 g/kg LC50 (rat, inhalation/4 hours) > 791 mg/m3 Exposure Limits EPOXY RESIN ( ) Specific Ingredient Data LD50 (rat, oral)

12 LC50 (rat, inhalation/4 hours) Exposure Limits AMORPHOUS SILICA ( ) Specific Ingredient Data LC50 (rat, inhalation, dust/1hour): mg/m3 LD50 (rat, oral) LD50 (dermal, rabbit) > 64 g/kg > 16 g/kg LC50 (rat, inhalation/4 hours) mg/l Estimated Exposure Limits CMRG: CEIL 5 mg/m3 9 Physical and Chemical Properties Physical form,color,odour: Liquid; light straw colour; epoxy odour; Odour Threshold: ph: Not applicable Boiling point/boiling range: Melting point/melting range: Vapour pressure: Water Solubility: Not applicable Not Available <= 0.03 mmhg at 25 C Specific gravity: 1.18 Water=1

13 SCOTCH-WELD(TM) EPOXY ADHESIVE DP-100 NS, Page 6 of 9 TRANSLUCENT (PART B) Vapour density: Volatile organic compounds: Evaporation rate: Not applicable Not applicable Viscosity: Percent Volatile: centipoise 10 Stability and Reactivity Conditions to Avoid: Heat is generated during cure. Do not cure a mass larger than 50 grams in a confined space to prevent a premature reaction (exotherm) with production of intense heat and smoke. Materials to Avoid: Strong acids; Strong oxidizing agents; Hazardous Decomposition: Aldehydes - During Combustion; Carbon monoxide - During Combustion; Carbon dioxide - During Combustion; Ketones - During Combustion; Stability and Reactivity: Hazardous polymerization will not occur. Stable.

14 This material may be reactive with certain agents under certain conditions - see the remaining headings in this section. 11 Toxicological Information Effects from Eye Contact: Moderate Eye Irritation: Signs/symptoms may include redness, swelling, pain, tearing, and blurred or hazy vision. Effects from Skin Contact: Mild Skin Irritation: Signs/symptoms may include localized redness, swelling, itching, and dryness. Allergic Skin Reaction (non-photo induced): Signs/symptoms may include redness, swelling, blistering, and itching. Effects from Inhalation: No health effects are expected. Effects from Ingestion: Gastrointestinal Irritation: Signs/symptoms may include abdominal pain, stomach upset, nausea, vomiting and diarrhea. Sensitization Information: Allergic Skin Reaction (non-photo induced): Signs/symptoms may include redness, swelling, blistering, and itching. Carcinogenicity: Mutagenicity:

15 SCOTCH-WELD(TM) EPOXY ADHESIVE DP-100 NS, Page 7 of 9 TRANSLUCENT (PART B) Reproductive Effects: Component Based Information: Product Based Information: 12 Ecological Information Environmental Data: Ecotoxicity Data: Ecofate Data: 13 Disposal Considerations Product as Sold: Product Packaging:

16 Special Instructions: Since regulations vary, consult applicable regulations or authorities before disposal. 14 Transport Information Transportation of Dangerous Goods TDG Classification: Non-Regulated Material (Classification is for Kit as a whole and does not necessarily apply to the components separately) Special Information:

17 SCOTCH-WELD(TM) EPOXY ADHESIVE DP-100 NS, Page 8 of 9 TRANSLUCENT (PART B) 15 Regulatory Information WHMIS Classification: D2B NOTE: This product has been classified in accordance with the hazard criteria of the Controlled Products Regulations (CPR) and the MSDS contains all the information required by the CPR. Product Certifications: The product on this MSDS, or all its components, is included on the following countries' chemical inventories, as noted: DSL - Domestic Substances List (Canada) TSCA - Toxic Substances Control Act (USA) AICS - Australian Inventory of Chemical Substances MITI - Ministry of International Trade and Industry (JAPAN) KECI - Korean Existing Chemicals Inventory PICCS - Philippines Inventory of Commercial Chemical Substances CICS - Chinese Inventory of Chemical Substances 16 Other Information Reason for Reissue:

18 The following Sections and topics have been updated or revised: Section 1 - Intended Use of Product; Section 3 - Composition/Information on Ingredients Section 4 - First Aid Measures Section 5 - Fire Fighting Measures Section 6 - Accidental Release Measures Section 7 - Handling and Storage Section 8 - Exposure Controls/Personal Protection Section 9 - Physical and Chemical Properties; Section 10 - Stability and Reactivity; Section 11 - Toxicological Information; Section 12 - Ecological Information Section 13 - Disposal Considerations The information in this Material Safety Data Sheet (MSDS) is believed to be correct as of the date issued. 3M MAKES NO WARRANTIES, EXPRESSED OR IMPLIED, STATUTORY OR OTHERWISE, INCLUDING, BUT NOT LIMITED TO, ANY IMPLIED WARRANTY OR CONDITION OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE OR COURSE OF PERFORMANCE OR USAGE OF TRADE. User is responsible for determining whether the 3M product is fit for a particular purpose and suitable for user's method of use or application. Given the variety of factors that can affect the use and application of a 3M product, some of which are uniquely within the user's knowledge and control, it is essential that the user

19 SCOTCH-WELD(TM) EPOXY ADHESIVE DP-100 NS, Page 9 of 9 TRANSLUCENT (PART B) evaluate the 3M product to determine whether it is fit for a particular purpose and suitable for user's method of use or application. ---End---

20 3M Canada Company 1840 Oxford Street East, Post Office Box 5757 London, Ontario N6A 4T1 Medical Emergency Telephone: (519) , Ext Transportation Emergency Telephone (CANUTEC): (613) ======================================================================= Material Safety Data Sheet ======================================================================= Document id : Issue date : 2015/04/17 Version : Supersedes date : 2013/10/28 Copyright, 1997, 3M Canada Company. All rights reserved. Copying and/or downloading of this information for the purpose of properly utilizing 3M products is allowed provided that: (1) the information is copied in full with no changes unless prior written agreement is obtained from 3M, and (2) neither the copy nor the original is resold or otherwise distributed with the intention of earning a profit thereon. Prepared by: Corporate Regulatory Services, 3M Canada Company Telephone: (800) , Fax: (800) , Web Site:

21 1 Chemical Product and Company Identification Tradename: SCOTCH-WELD(TM) EPOXY ADHESIVE DP-100 NS, TRANSLUCENT (PART A) Product ID: Intended Use of Product: Structural adhesive Division: INDUSTRIAL ADHESIVES AND TAPES 2 Hazards Identification Critical Hazards: Severe Eye Irritation: Signs/symptoms may include significant redness, swelling, pain, tearing, cloudy appearance of the cornea, and impaired vision. Severe Skin Irritation: signs/symptoms can include localized redness, swelling, itching, dryness, cracking, blistering, and pain. See Sections 7 and 11 for further information.

22 SCOTCH-WELD(TM) EPOXY ADHESIVE DP-100 NS, Page 2 of 10 TRANSLUCENT (PART A) 3 Composition/Information on Ingredients Ingredient Name CAS Number Percentage Mercaptan Polymer (NJTS Reg. No. Trade Secret ) HYDROGENATED TERPHENYL ,4,6-TRIS((DIMETHYLAMINO)METHYL) PHENOL AMORPHOUS SILICA BIS[(DIMETHYLAMINO)METHYL]PHENOL POLYPHENYLS, QUARTER- AND HIGHER, PARTIALLY HYDROGENATED Organosilane NOTE: Mercaptan Polymer (NJTS Reg. No ) is a Trade Secret material which is not controlled according to WHMIS criteria. Each percentage is expressed as the ratio of the weight of the ingredient to the weight of the controlled product. 4 First Aid Measures

23 Instructions for Eye Contact: Immediately flush with large amounts of water. Remove contact lenses if easy to do. Continue rinsing. Get medical attention. Instructions for Skin Contact: Immediately wash with soap and water. Remove contaminated clothing and wash before reuse. If signs/symptoms develop, get medical attention. Instructions for Inhalation: Remove person to fresh air. If you feel unwell, get medical attention. Instructions for Ingestion: Rinse mouth. If you feel unwell, get medical attention. Special Instructions: Not applicable

24 SCOTCH-WELD(TM) EPOXY ADHESIVE DP-100 NS, Page 3 of 10 TRANSLUCENT (PART A) 5 Fire Fighting Measures Flash point: Lower Explosive Limit (%): Upper Explosive Limit (%): Autoignition temperature: >= 149 C Estimated Not applicable Not applicable Not Available Suitable Extinguishing Media: In case of fire: Use a fire fighting agent suitable for ordinary combustible material such as water or foam to extinguish. Exposure Hazards during Fire: Combustion Products from Fire: Carbon monoxide - During Combustion; Carbon dioxide - During Combustion; Hydrogen Sulfide - During Combustion; Oxides of Nitrogen - During Combustion; Oxides of Sulfur - During Combustion; Unusual Fire and Explosion Hazards None inherent in this product. Fire Fighting Procedures: No unusual fire or explosion hazards are anticipated. Evacuate area. NFPA: Health 2

25 NFPA: Fire 1 NFPA: Reactivity 1 NFPA: Unusual Reaction Hazard none National Fire Protection Association (NFPA) hazard ratings are designed for use by emergency response personnel to address the hazards that are presented by short-term, acute exposure to a material under conditions of fire, spill, or similar emergencies. Hazard ratings are primarily based on the inherent physical and toxic properties of the material but also include the toxic properties of combustion or decomposition products that are known to be generated in significant quantities. 6 Accidental Release Measures Personal Precautions: Ventilate the area with fresh air. For large spill, or spills in confined spaces, provide mechanical ventilation to disperse or exhaust vapors, in accordance with good industrial hygiene practice. Warning! A motor could be an ignition source and could cause flammable gases or vapors in the spill area to burn or explode. Refer to other sections of this MSDS for information regarding physical and health hazards, respiratory protection, ventilation,

26 SCOTCH-WELD(TM) EPOXY ADHESIVE DP-100 NS, Page 4 of 10 TRANSLUCENT (PART A) and personal protective equipment. Environmental Procedures For larger spills, cover drains and build dikes to prevent entry into sewer systems or bodies of water. Methods for cleaning up Contain spill. Working from around the edges of the spill inward, cover with bentonite, vermiculite, or commercially available inorganic absorbent material. Mix in sufficient absorbent until it appears dry. Remember, adding an absorbent material does not remove a physical, health, or environmental hazard. Collect as much of the spilled material as possible. Place in a closed container approved for transportation by appropriate authorities. Clean up residue with an appropriate solvent selected by a qualified and authorized person. Ventilate the area with fresh air. Read and follow safety precautions on the solvent label and MSDS. Seal the container. Dispose of collected material as soon as possible. Spill Response: Refer to other sections of this MSDS for information regarding physical and health hazards, respiratory protection, ventilation,

27 and personal protective equipment. Call 3M-HELPS line ( ) for more information on handling and managing the spill. 7 Handling and Storage Storage Requirements: Incompatible Materials: Store away from acids; Store away from oxidizing agents. Ventilation: Explosion Prevention: Avoid contact with oxidizing agents (eg. chlorine, chromic acid etc.) Use Instructions: Avoid breathing dust/fume/gas/mist/vapours/spray. Do not get in eyes, on skin, or on clothing. Do not eat, drink or smoke when using this product. Wash thoroughly after handling. Contaminated work clothing should not be allowed out of the workplace. Wash contaminated clothing before reuse.

28 SCOTCH-WELD(TM) EPOXY ADHESIVE DP-100 NS, Page 5 of 10 TRANSLUCENT (PART A) Avoid release to the environment. 8 Exposure Controls/Personal Protection Personal Protection Eye Protection: The following should be worn alone or in combination, as appropriate, to prevent eye contact: Indirect vented goggles; Hand Protection: The following glove material(s) are recommended: butyl rubber; neoprene; nitrile rubber; Skin Protection: Select and use gloves and/or protective clothing to prevent skin contact based on the results of an exposure assessment. Consult with your glove and/or protective clothing manufacturer for selection of appropriate compatible materials. Respiratory Protection: Select one of the following approved respirators based on airborne

29 concentration of contaminants and in accordance with regulations: Half facepiece or fullface air-purifying respirator with organic vapor cartridges and P95 particulate prefilters Ingestion (Prevention): Recommended Ventilation: Use general dilution ventilation and/or local exhaust ventilation to control airborne exposures to below relevant Exposure Limits and/or control dust/fume/gas/mist/vapors/spray. If ventilation is not adequate, use respiratory protection equipment. Ingredient Exposure Data Mercaptan Polymer (NJTS Reg. No ) (Trade Secret) LD50 (rat, oral) LC50 (rat, inhalation/4 hours) Exposure Limits HYDROGENATED TERPHENYL ( ) LD50 (rat, oral) 17,500 mg/kg LC50 (rat, inhalation/4 hours) Exposure Limits ACGIH: TWA 0.5 ppm ACGIH: CEIL 5 mg/m3 Category: TERPHENYLS; 0.5 ppm ACGIH: TWA

30 SCOTCH-WELD(TM) EPOXY ADHESIVE DP-100 NS, Page 6 of 10 TRANSLUCENT (PART A) 2,4,6-TRIS((DIMETHYLAMINO)METHYL)PHENOL ( ) Specific Ingredient Data LD50 (rat, dermal): 1280 mg/kg LD50 (rat, oral) 1200 mg/kg LC50 (rat, inhalation/4 hours) Exposure Limits CMRG: TWA 5 ppm AMORPHOUS SILICA ( ) Specific Ingredient Data LC50 (rat, inhalation, dust/1hour): mg/m3 LD50 (rat, oral) LD50 (dermal, rabbit) > 64 g/kg > 16 g/kg LC50 (rat, inhalation/4 hours) mg/l Estimated Exposure Limits CMRG: CEIL 5 mg/m3 BIS[(DIMETHYLAMINO)METHYL]PHENOL ( ) Specific Ingredient Data LD50 (rat, oral) LC50 (rat, inhalation/4 hours) Exposure Limits POLYPHENYLS, QUARTER- AND HIGHER, PARTIALLY HYDROGENATED ( ) Specific Ingredient Data

31 LD50 (rat, oral) LC50 (rat, inhalation/4 hours) Exposure Limits Organosilane ( ) Specific Ingredient Data LD50 (rat, oral) LC50 (rat, inhalation/4 hours) Exposure Limits 9 Physical and Chemical Properties Physical form,color,odour: Liquid; light amber colour; strong mercaptan odour; Odour Threshold: ph: Not applicable Boiling point/boiling range: Melting point/melting range: Vapour pressure: Water Solubility: Not applicable Not applicable <= 0.02 mmhg at 20 C Negligible

32 SCOTCH-WELD(TM) EPOXY ADHESIVE DP-100 NS, Page 7 of 10 TRANSLUCENT (PART A) Partition coefficient (K o/w): Specific gravity: Vapour density: Not Available 1.15 Water=1 Not applicable Volatile organic compounds: Evaporation rate: Not applicable Viscosity: Percent Volatile: centipoise 10 Stability and Reactivity Conditions to Avoid: Heat is generated during cure. Do not cure a mass larger than 50 grams in a confined space to prevent a premature reaction (exotherm) with production of intense heat and smoke. Materials to Avoid: Strong acids; Strong oxidizing agents; Hazardous Decomposition: Carbon monoxide - During Combustion; Carbon dioxide - During Combustion; Hydrogen Sulfide - During Combustion; Oxides of Nitrogen - During Combustion; Oxides of Sulfur - During Combustion;

33 Stability and Reactivity: Hazardous polymerization will not occur. Stable. This material may be reactive with certain agents under certain conditions - see the remaining headings in this section. 11 Toxicological Information Effects from Eye Contact: Severe Eye Irritation: Signs/symptoms may include significant redness, swelling, pain, tearing, cloudy appearance of the cornea, and impaired vision. Effects from Skin Contact: Severe Skin Irritation: signs/symptoms can include localized redness, swelling, itching, dryness, cracking, blistering, and pain. Effects from Inhalation: Respiratory Tract Irritation: Signs/symptoms may include cough, sneezing, nasal discharge, headache, hoarseness, and nose and throat pain. Effects from Ingestion: May be harmful if swallowed. Gastrointestinal Irritation: Signs/symptoms may include abdominal

34 SCOTCH-WELD(TM) EPOXY ADHESIVE DP-100 NS, Page 8 of 10 TRANSLUCENT (PART A) pain, stomach upset, nausea, vomiting and diarrhea. Sensitization Information: Carcinogenicity: Mutagenicity: Reproductive Effects: Component Based Information: Product Based Information: 12 Ecological Information Environmental Data: Ecotoxicity Data: Ecofate Data:

35 13 Disposal Considerations Product as Sold: Product Packaging: Special Instructions: Since regulations vary, consult applicable regulations or authorities before disposal. 14 Transport Information Transportation of Dangerous Goods TDG Classification: Non-Regulated Material (Classification is for Kit as a whole and does not necessarily apply to the components separately) Special Information:

36 SCOTCH-WELD(TM) EPOXY ADHESIVE DP-100 NS, Page 9 of 10 TRANSLUCENT (PART A) 15 Regulatory Information WHMIS Classification: D2B NOTE: This product has been classified in accordance with the hazard criteria of the Controlled Products Regulations (CPR) and the MSDS contains all the information required by the CPR. Product Certifications: The product on this MSDS, or all its components, is included on the following countries' chemical inventories, as noted: DSL - Domestic Substances List (Canada) TSCA - Toxic Substances Control Act (USA) AICS - Australian Inventory of Chemical Substances KECI - Korean Existing Chemicals Inventory PICCS - Philippines Inventory of Commercial Chemical Substances CICS - Chinese Inventory of Chemical Substances 16 Other Information Reason for Reissue: The following Sections and topics have been updated or revised:

37 Section 2 - Hazards Identification - Critical Hazards Section 3 - Composition/Information on Ingredients Section 4 - First Aid Measures Section 5 - Fire Fighting Measures Section 6 - Accidental Release Measures Section 7 - Handling and Storage Section 8 - Exposure Controls/Personal Protection Section 9 - Physical and Chemical Properties; Section 10 - Stability and Reactivity; Section 11 - Toxicological Information; Section 12 - Ecological Information Section 13 - Disposal Considerations Section 15 - Regulatory Information: Product Certifications The information in this Material Safety Data Sheet (MSDS) is believed to be correct as of the date issued. 3M MAKES NO WARRANTIES, EXPRESSED OR IMPLIED, STATUTORY OR OTHERWISE, INCLUDING, BUT NOT LIMITED TO, ANY IMPLIED WARRANTY OR CONDITION OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE OR COURSE OF PERFORMANCE OR USAGE OF TRADE. User is responsible for determining whether the 3M product is fit for a particular purpose and suitable for user's method of use or application. Given the variety of factors that can affect the use and application of a 3M product, some of which are uniquely within

38 SCOTCH-WELD(TM) EPOXY ADHESIVE DP-100 NS, Page 10 of 10 TRANSLUCENT (PART A) the user's knowledge and control, it is essential that the user evaluate the 3M product to determine whether it is fit for a particular purpose and suitable for user's method of use or application. ---End---

39