Technical Application Guide for UP-SHINE LED Tube Light UP-T815W1500-R

Size: px

Start display at page:

Download "Technical Application Guide for UP-SHINE LED Tube Light UP-T815W1500-R"

Hester Mathews
6 years ago
Views:

1 Technical Application Guide for UP-SHINE LED Tube Light UP-T815W15-R

Introduction Up-shine AL+PC LED Tube light adopts LM- 8 285 SMD LED with high brightness and slight light decay. Excellent cooling systemwith >.8mm thickness AL66 aluminum heatsink.

2 Introduction Up-shine AL+PC LED Tube light adopts LM SMD LED with high brightness and slight light decay. Excellent cooling systemwith >.8mm thickness AL66 aluminum heatsink. Clear or frosted cover optional.v fire-rated PC cover, up to 95% light transmittance. Reliable LED driver with brandedhigh quality capacitor and IC solution ensures excellent working performance. Up to 7% energy saving compared to traditional tube Long lifetime of 4, hours 12 wide beam angle 15mm length CCT: K 4K 5K 57K No UV/IR light Environment friendly, without Mercury or any other hazardous substances Application notes IP2 for indoor use Professional electrician for installation only Switch off before installation Do not touch when in use Keep away from hot steam and corrosive gas Application Areas Suitable for commercial and residential applications like offices, supermarkets, shops, schools, hotels, restaurants, workshop, warehouse, homes etc. Certificates SAA

3 Product Information Technical Specifications Model Voltage Power Power Factor Lumen (±5%) Beam angle CCT Lifespan CRI Dimmable Dimension UP-T815W15-R AC1-24V 15W o K 4h 8 No L151*W28.5*H2.mm UP-T815W15-R AC1-24V 15W o 4K 4h 8 No L151*W28.5*H2.mm UP-T815W15-R AC1-24V 15W o 5K 4h 8 No L151*W28.5*H2.mm UP-T815W15-R AC1-24V 15W o 57K 4h 8 No L151*W28.5*H2.mm Driver data Sheet Driver data Non-dim Input rated Voltage Frequency Input Voltage AC1-24V 5/6Hz AC85-265V Efficiency 85% Total load Wattage 15W±1W Power Factor.9 Rated input current Full load output Voltage Rated output current Output current range.17a DC7-79V 2mA 2mA±5% Power tolerance ±5% Current output tolerance ±5% Short circuit protection Over voltage protection Over temperature protection PASS PASS PASS Fixture Compatibility Rated Wattage Electrical Classification Ingress Protection Operating Temp Operating Humidity Storage Temp 15W Ⅱ IP2-2 o C~45 o C ~9% -2 o C~65 o C

4 Spectral Distribution K 4K.8 Max=591 [1.=2] 5.15SDCM FK.8 Max=6227 [1.=2] 5.98SDCM F4K x=.4295 y= x=.755 y= K 57K Max=829 [1.=2] 5.12SDCM F5K.8 Max=9544 [1.=2] SDCM F57K.5.4. x=.4 y= x=.195 y= Photometric Diagram K 4K / MH=1m C/18 C9/27 Flux out: 566. lm.281ft 7.619, 24.86fc 1m 8, 267.6lx 6.562ft 1.95, 6.216fc 2m 2.5, 66.91lx 9.516ft 29.4cm 19.ft 58.9cm / MH=1m C/18 C9/27 Flux out: lm.281ft 8.82, 26.6fc 1m 9.22, 28.5lx 6.562ft 2.95, 6.516fc 2m 22.55, 7.14lx 9.244ft cm 18.49ft 56.51cm ft.8466, 6fc m 9.112, 29.74lx 28.55ft 87.1cm ft.91, 2.896fc m, 1.17lx 27.7ft cm ft.4762, 54fc 4m 5.126, 16.7lx 8.6ft cm ft.529, 1.629fc 4m 5.69, 17.5lx 6.98ft 1127.cm - AVERAGE BEAM ANGLE(5%): 12.6 DEG ft.48,.9945fc 47.58ft 5m.28, 1.71lx cm Height Eavg, Emax Angle: 12deg Diameter - AVERAGE BEAM ANGLE(5%): DEG ft.5, 1.4fc 46.22ft 5m.69, 12lx cm Height Eavg, Emax Angle: 19.26deg Diameter 5K 57K / MH=1m C/18 C9/27 Flux out: lm.281ft 8.695, 26.92fc 1m 9.59, 289.7lx 6.562ft 74, 6.729fc 2m, 7lx 9.198ft 28.5cm 18.4ft 56.71cm / MH=1m C/18 C9/27 Flux out: 6.1 lm.281ft 8.74, 26.11fc 1m 86.9, 281.lx 6.562ft 8, 6.527fc 2m 21.7, 7.26lx 9.692ft cm 19.8ft 59.84cm ft.9661, 2.991fc m 1.4, 9lx 27.59ft 841.6cm ft.8971, 2.91fc m 9.656, lx 29.8ft cm ft.544, 1.682fc 4m 5.849, 18.11lx 6.79ft cm ft.546, 1.62fc 4m 5.42, 17.56lx 8.77ft cm - AVERAGE BEAM ANGLE(5%): 12.8 DEG ft.478, 1.77fc 45.99ft 5m.744, 19lx cm Height Eavg, Emax Angle: 18.99deg Diameter - AVERAGE BEAM ANGLE(5%): DEG ft.229, 1.44fc 48.46ft 5m.476, 14lx cm Height Eavg, Emax Angle: 11deg Diameter

Polar Diagram Comparison -15 O +/-18 O 15 O -12 O 12 O -9 O 9 O 6 12-6 O 18 6 O 24 - O

4 Lifetime (hours) 8 7 6 5 4 2 1 65 o C 75 o C 85 o C 95 o C 15 o C Capacitor Tc ( o C)

1 2 4 5 6 7 8 9 1 LifeTime (hours) Temperature The testing is operated at 25 C The

whenever the temperature drops 1 C The highest withstand temperature of IC, MOS could

Temperature ( o C) 1 9 8 7 6 5 4 2 1 19:59:47 2:2:4 21:5:4 21:8:4 22:11:4 22:44:4

5 Polar Diagram Comparison -15 O +/-18 O 15 O -12 O 12 O -9 O 9 O O 18 6 O 24 - O O O AVERAGE BEAM ANGLE (5%): 12.8DEG C/18, 19.4 deg C/21, 1.6 deg C6/24, deg C9/27, 19.7 deg Driver lifetime & LED light decay rate Driver Lifetime LED Light Decay Rate 9 11%.4 Lifetime (hours) o C 75 o C 85 o C 95 o C 15 o C Capacitor Tc ( o C) % Luminous Flux 15% 1% 95% 9% 85% % 75% FLUX.1.5 U'V' 7% LifeTime (hours) Temperature The testing is operated at 25 C The lifetime of capacitor, minimum of 5, hours if operated at 15 C, will be doubled whenever the temperature drops 1 C The highest withstand temperature of IC, MOS could be 12 C The highest withstand temperature of LED junction temperature is 15 C Temperature ( o C) :59:47 2:2:4 21:5:4 21:8:4 22:11:4 22:44:4 2:17:4 :2:4 :56:4 1:29:4 2:2:4 2:5:4 :8:4 4:14:4 5:2:4 5:5:4 6:26:4 7:2:4 8:5:4 8:8:4 Time IC Capacitor MOS PCB Voltage transformer Environmental temperature The driver lifespan is based on capacitor working temperature.

6 Installation 1. One end power tube, installation with Fluorescent tube 1-24Vac 1-24Vac 1-24Vac Step 1 Step 2 Step 2. One end power tube,installation with Inductive Ballast Inductive Ballast Remove the inductive ballast or not 1-24Vac 1-24Vac Remove the fluorescent starter 1-24Vac Fluorescent starter Fluorescent tube Step 1 Step 2 Step. Two end power tube, installation with Fluorescent tube 1-24VAC 1-24VAC 1-24VAC Step 1 Step 2 Step 4. Two end power tube, installation with Inductive Ballast 1-24VAC Inductive Ballast Fluorescent tube 1-24VAC Remove the inductive ballast or not 1-24VAC Connect the wire if the inductive ballast is removed Fluorescent starter Remove the Fluorescent starter Step 1 Step 2 Step Packaging Information SIZE(CM) N.W/pc (KGS) G.W.(KGS) Q'TY(PCS) Carton 159.5*21* '' standard container 4'' standard container CTNS Q'TY(PCS) VOLUME(CBM) Phone: Add: 2nd building Dingfeng High-Tech Zone, Fuyuan 1st road, Fu Yong Sub-district, Bao'an, Shenzhen China

Technical Application Guide for UP-SHINE LED Downlight UP-DL W.

Technical Application Guide for UP-SHINE LED Downlight UP-DL44-3-1W Introduction DL44 downlight is structural designed with integration of heatsink and surface cover, aims at increasing the heat dissipation