Specification of Backlit LED Panel Light

Transcription

1 Shenzhen Ewin Lighting Technology Co.,LTD Specification of Backlit LED Panel Light Our Elegant and Elaborat ly designed Backlit LED panel light is mainly intended to reducing energy consumption and landscaping. High brightness, soft lightand no need for guide plate is the main characteristic of this series of backlit panel. The high Lighting Efficiency can up to 100lm/w. Easy to install and maintain to replace the conventional lights, like fluorescent lamp, energy saving lamps, Down lights, etc. Especially applied for Office buildings, Supermarkets, Shopping malls, Conference halls, and Hotels etc. The warranty is three years. Our products are all strictly CE \TUV\RoHS\FCC\SAA\C-Tick approved. Certificates TUV/CE/RoHS/CB/GS/SAA/ERP Features and Advantages 1. Elegant appearance: no screws on the surface, smooth and tidy 2.Outstanding Heat Dissipation: help to reduce the luminous degradation and extent lifespan of products 3.High Lighting Transmittance Efficiency: up to 93% by imported diffuser from Japan, 4.High Lighting Efficiency: up to 100lm/W by Epistar SMD 3014 LED 5. No start-up time, no flickering, no humming. 6. No such hazard that mercury or lead enters the environment. No RF and electronic magnetic interference 7. Over 50,000 hours life expectancy.

2 Application Offices Kitchens Bathrooms Library Department Store & Boutiques Restaurant & Cafeteria Conference Rooms Hospital & Laboratory Dimension (Unit: mm)

3 Technical Specificatuon A: Technical Parameter Item No. PL Dimension Voltage Power LED Type LED Quantity Luminous Flux Warm white Neutral white Pure white 625x625x43mm AC85V-265V 50/60HZ 45W SMD pcs 3900lm 4000lm 4300lm Color Temperature (CCT) Warm white K Neutral white K Pure white K Beam Angle 120 Color Rendering Index (CRI) 80 Power Supply Efficiency >90% Luminous Efficiency Up to 100lm/W Power Factor (PF) >0.95 Total Harmonic Distortion (THD) 15% IP Rank IP 50 Net Weight Certificate 2.50 Kgs CE, SAA, CB, GS,ERP B: Mechanical Specifications LED Driver Connection to Power Housing Processing Material Diffuser Installation Component Set Constant Current LED Driver, Plastic Shell 2x1.0mm 2 PVC Cable Injection moulding for plastic frame PMMA, Plastic frame V2 PMMA diffuser 1. Recessed Installation 2. Suspended Installation,Optional C. Environmental Temperature Range Operating -20 to 40 Humidity Range Operating 20 % to 95 % Temperature Range Storage -40 to 75 Humidity Range Storage 10 % to 80 %

4 Light Distribution Curve & Max CD Distribution Curve B: Illumination Diameter Electrical Connection LED power supply

5 Installation Warning: Before installation, please make sure the power is turned off. A. The standard False Ceiling Installation Step1:Opening the false ceiling Step2:Install the panel light Step3:Connect the wire for panel B. The embedded installation PUT PUT Step1.To Saw a hole according the panel holing demension Step2.Install the panel in the hole of ceiling B. The embedded installation C.The suspended installation 1.To drill the holes on the Ceiling,Fix the components with screws on the Ceiling. 2.To fix the steel rope at the panel suspended components 3.To adjust the panel height. C.The suspended installation

6 Compliance and Standards 1. Insulation Resistance The IR shall be at least 50MΩ when apply 500Vdc between primary and secondary 2. Dielectric Strength (Hi -pot) Input to Output 3750Vac 60Hz 1minute 3MA When AC voltage of 3.75KV is applied, and the voltage applied to the insulation under test is gradually raised from zero to the prescribed voltage in 1s, and held at that value for 60s between the inputs. And output and between the input and housing, the current sensitivity shall be less than 5mA. After this test, the adapter shall exhibit no electrical and mechanical abnormalities. 3. Leakage Current The leakage current shall be less t han 0.25m A for class II when power supply is operated maximum input voltage and maximum load. 4. Safety Standard IEC: :2008 IEC /A1:2010 IEC :2006 IEC62031:2008 IEC62471:2006 IEC :2009: Passed EN /A11:2009 EN :2006 EN /A1:2011 EN62031:2008 EN62471:2008 EN61195:1999 EN62493:2010: Passed 5. EMI/EMS Standard EN55015: Passed EN : Passed EN : Passed 6. Certificates TUV/CE/ROHS/CB/PSE/SAA/C-TICK Remarks: Clients can get local certif icate according the CB certificates easily, more detailed information, please consult EWIN by mail: info@ewinled.com, or Call us: Packing A: Packing Information Material QTY/CTN Carton Size G.W. Net Weight Carton 2pcs 675*675*190mm 7kgs 5 kgs

7 B: Standard Sticker on the back of LED Panel, External Carton Marks C: Packing List Installation Method No. Description Quantity Complement 1 625X625LED panel light 1pc 1. Recessed 2 Constant LED Driver 1pc 3 Usage Manual 1copy 1 625X625 LED panel light 1pc 2. Suspended 2 Constant LED Driver 1pc 3 Usage Manual 1copy 4 Suspended Installation Component Set 1set Optional D: Packing Pictures

8 E: Drop and Impact Test 1.Each edge (as chart below) has been tested. 2.The appearance and Performance of the LED Panel Light has been rechecked after the Test. Warranty 5-year warranty since the date of purchase is offered for all Backlit Panel Light. Warranty Term 1. Under the terms of this warranty, if the product has a failure occurring under normal usage within warranty period, EWIN will provide free maintenance service based on the proof-documents and invoice (copy) of failure product. 2. EWIN will provide paid maintenance service by under conditions within warranty. a. Failure or damage due to force majeure. b. Failure or dama ge due to transport or unloading. c. Failure or damage due to incorrectly usage or fail to comply with the User's Guide and Caution d. Failure. or damage due to demolition, repair, alteration without Manufacturer's authorization 3. Please deliver. the failure product by original packing for maintenance service, will not be responsible for any failure or damage in transportation if customer uses non-original packing or improper packing 4. EWIN reserves the right. for final explanation of aforesaid terms Caution : EWIN will not be responsible for any other failure or damage by incorrectly usage.. Address: Tongan Hengye Building, NO 3 of Tianxin Blvd,Shiyan Town,Baoan District,Shenzhen,China Tel: Fax: