E D S A K N O W L E D G E
|
|
- Magdalene Nicholson
- 5 years ago
- Views:
Transcription
1 CODE CAT E GORY COURSE DURAT I ON V E N U E ME#111 Piping /Design Piping Design and Arrangement Trainer: Sam Wei Yeow T E N T ATIVE D ATE( S ) 3-days Singapore February 2014 Course Synopsis: The course will review the basic requirements of Piping Arrangement& Pipe Support Design with emphasis on pipe routing design practices& requirements on compressor, pump, heat exchanger, air cooler, vessel, flare system piping layout. A general overview of piping material, pipe flexibility and pipe stress requirements will be included in this course. Application of these concepts include practical case studies on offshore piping layout, piping material selection, MTO review & general Piping Fit-For-Life (FFS) Study as per ASME B31.3 requirements. This course provides the necessary knowledge for those who are responsible for designing& constructing a new piping system, particularly on offshore environment,& those who oversee and ensure the integrity of existing piping system. ME#121 Fluid Flow Practical Analysis Using PIPENET Trainer: Sholihah Rosli / Dr. Dev Sebastian 2-days February 2014 Course Synopsis: A 2-days course where attendees will be taught on correct methods in doing transient analysis and gained tips in using PIPENET software. Towards the end of this workshop participants will have the correct approach in performing transient analysis using computer software tools.and at the same time, learn the useful tips to use PIPENET in performing their transient analysis Design & Fabrication of Pressure Vessels (Based on ASME ME#07 Equipment Boiler & Pr essur e Vessel Code: Sectio n VIII, Divis i o n 1) 3-days Malaysia February 2014 Tr ainer: Ramesh Tiwar i Course Synopsis: Based on the rules for pressure vessel design & construction, this 3-day training course covers the requirement of ASME Section VIII, Div. 1, including organization, design, materials, fabrication, inspection, testing and documentation of pressure vessels. ME#23 Mechanical / Piping / Process Details Engineering of Piping System and Process Equipment Trainer: Bob Wilson Singapore / April / May 2014 Course Synopsis: This course will be of interest to people employed in any area that piping is present, be it Refinery, Chemical, Power, Pulp& Paper, Utility etc. It shall Introduce engineers, designers& construction personnel to the various procedures involved in the development& engineering of Piping& Instrumentation Diagrams(P&IDs), Equipment Plot Plans, Piping Arrangements& Fabrication Drawings. ME#21 Mechanical / Piping / Process The Layout of Piping Systems and Process Equipment Trainer: Bob Wilson Indonesia April / May 2014 Course Synopsis: This course will familiarize engineers, designers& construction personnel with layout, design procedures& practices involved in the location of equipment& layout of piping systems. Traditionally there has been little formal training in this area& design decisions have to be made based on practical considerations without formulae or code reinforcement. Completing piping arrangements take up the majority of man-hours in the design of a process plant & the designer is required to apply acceptable layout procedures. This intensive course will give attendees the background required to complete a typical equipment layout& piping arrangement. ME#02 Piping / Design ASME B31.3 Process Piping, Design Construction & Mechanical Integrity Trainer: Don Frikken 5 days Malaysia June 2 6, 2014 Course Synopsis: The aim of this course is to provide the participants with a complete and up-to-date overview of the area of Piping Technology with an emphasis on process piping. The course covers design, fabrication, examination & testing requirements of ASME B31.3. It covers Code requirements from design through start-up of new piping systems, as well as standards for inspection & repair of piping systems that have been in service, as provided in API 570, Piping Inspection Code. This course provides a foundation of knowledge necessary for those responsible for assuring the mechanical integrity of existing piping systems,
2 CODE CAT E GORY COURSE DURAT I ON VE NUE ME#05 Piping / Piping Vibration Analysis & Practical Engineering Solutions in Pr ocess Plants Tr ainer: Don Fr ikken / Char les Becht TENTATIVE DATE(S) 3-days June 9 13, 2014 Course Synopsis: This course provides a background on fundamental causes of piping vibration & how to identify sources of vibration, rules of thumb & simplified methods for evaluating vibration severity, & methods of treatment. A wide variety of causes of vibration are covered in order to enable the participant to properly evaluate the variety of piping vibration problems that can occur in piping systems. The causes of vibration, where possible, are discussed with respect to very basic energy& momentum principles that enable the participant to understand what is happening within& to the piping system. ME#75 Mechanical / Equipment Steam and Gas Turbine Indonesia May 2014 Course Synopsis: In recent years, modern Steam and Gas Turbines have dramatically increased in size and complexity due to improvements in output and efficiency together with increasingly stringent environmental requirements. Therefore, the requirements upon the Plant Manager are growing. After attending the course, one will gain a detailed understanding of the operation and maintenance of steam and Gas Turbines. ME#11 Inspection /Reliability & API 579 Fitness For Service Indonesia June 2014 Course Synopsis: The course will cover the details of the API 579 code where it could be of benefit to inspectors, maintenance personnel, design engineers, stress analysts, and project personnel. Those involved with repairs/alterations of vessels and piping will also. Among topics that will be discussed; Brittle Fracture (Part 3), General Metal Loss (Part 4), Local Metal Loss (Part 5), Pitting Corrosion (Part 6), Hydrogen Blisters and Hydrogen Damage Associated with HIC and SOHIC(Part 7) and etc. ME#27 Mechanical / Storage Tank / Reliability & Advanced Storage Tank API 650 and API 653 Design, and Inspection Indonesia June 2014 Course Synopsis: The course will highlight various common storage facilities for liquid and gaseous hydrocarbons & explain their configuration, tank farm requirements, design operation & maintenance aspects. Topics discussed will be; types of conventional storage tanks, design aspects & design codes (in compliance with API650, EN14015, BSI) operational aspects, tank maintenance, inspection & engineering (in compliance with API65 and EEMUA159) introduction in Risk Based Inspection (RBI) related to preventive maintenance, maintenance work (including tank jacking based on international & company standards API/EEMUA/DEP s)& safety aspects. ME#59 Management Shutdown and Turnaround Management 2-days August 2014 Course Synopsis: Shutdowns and turnarounds in the process industries have a significant impact on a business s financial performance, the integrity of its assets and their subsequent reliability. The planning, preparation and execution of a turnaround requires great attention as the turnaround budget is almost more than the annual maintenance budget. Turnaround training is now recognized as a critical element to the overall success of any turnaround, shutdown or outage. Success is dependent on the ability of the turnaround team to work within a turnaround procedure prepared meticulously and executed in the field systematically.
3 CODE CAT E GORY COURSE DURAT I ON V E N U E ME#119 Equipment Pump & Compressor: Selection, Operation & T E N T ATIVE D ATE( S ) August 2014 Course Synopsis: Join the class as the instructor brought the audience on journey of the pump and compressor training program which will provide the attendee with practical knowledge and skills needed to address common concerns of pumps, pump systems and compressors. ME#47 Material, Fabrication & Inspection API RP 580 Risk-Based Inspection API RP 581 Risk Based Inspection Technology 3-days Malaysia November 2014 Course Synopsis: API RP 580 introduces the principles and presents minimum general guidelines for developing a RBI program for fixed equipment and piping. API RP 581 provides quantitative RBI methods to establish an inspection program. PUBLIC OR IN-HOUSE TRAINING INQUIRIES: X1 Application of Risk Based Inspection (RBI) to Reduce Cost, Improve Reliability and Reduce Risk Trainer: J. Robert "Bob" Sims Course Synopsis: The "HOW-TO" manual to optimize plant inspection to achieve better reliability and reduced risk without sacrificing cost. Specific exercises will give participants the opportunity to examine important aspects for implementation of a RBI system that is tailored to the individual needs of their process plant facility. X2 Application of Codes and Standards in Pressure Vessels and Piping for Nuclear Power Plants Course Synopsis: This course covers the application of the ASME Boiler and Pressure Vessel Section III code for the design of nuclear plant components: vessels, tanks, piping systems, pumps and valves. It addresses the roles and responsibilities of the Owner, the designer, the regulator, and the authorized nuclear inspector. The course reviews the design methods, equations, and criteria, with example applications. The course also provides the regulatory requirements which apply to these components and a historical perspective on the evolution of the design and regulatory rules. X3 ASME B31.4 Liquid Pipelines and ASME B31.8 Gas Pipelines Course Synopsis: This course covers the requirements and practices of the oil and gas pipeline codes ASME B31.4 and ASME B31.8. The technical bases of the pipeline code requirements and their practical application to design, construction, operation, inspection and mechanical integrity. 3-day s
4 X4 Elements of Applied Process Engineering Trainer: Gennaro J. Maffia, PhD Course Synopsis: This course introduces the basic concepts that are needed to understand the performance and design of unit operations in Chemical Process Plants. The key principles of process engineering and how they are applies to the design, evaluation and operation of chemical plants will be covered. X5 Engineering Problem Solving for the Process Industry (Process Plant Troubleshooting) Tr ainer: Joseph Bonem 5 days 4 5 days Course Synopsis: A unique and highly rated course designed to provide industrial engineers and managers with both knowledge and experience in using a scientific problem solving approach. The course presents an approach that emphasizes the classical problem solving approach(defining the sequence of events) with the addition of the steps of formulating a theoretically correct working hypothesis, providing a means to test the hypothesis, and providing a foolproof means to eliminate the problem. X6 Failur e Pr eventio n, Repair & Life E xtensio n of Piping, Vessels and Tanks Course Synopsis: This course provides the technical and ASME Code basis to understand the causes of failure, optimize inspections, calculate margins and remaining life of degraded components (tanks, vessels, boilers, piping systems and pipelines), and select and implement the optimum repair techniques X7 Fundamentals of Process Engineering Trainer: Gennaro J. Maffia, PhD Course Synopsis: This course covers the broad field of process engineering from the development of a process flow schematic to the evaluation of operating and proposed technology. The course will be presented in interactive format with many industrial examples. Nineteen case studies from process engineering will be used to illustrate the concepts discussed during the lecture portion. Participants will have the opportunity to solve sample problems with the help of the professor. X8 Operation, and Repair of Plant Piping Systems 4 days 5 days 4 days Course Synopsis: This course covers the fundamentals of design, layout, fabrication, examination and testing as it relates to preventative repairs and modifications of piping. X9 Process Hazard Analysis Methods and Leadership - Advanced Course Trainer: William F. Kenney John Hauser 4 5 days Course Synopsis: This course is designed to provide participants with the knowledge and group leadership skills to systematically lead an effective, multidisciplinary Process Hazards Analysis(PHA) study intended to identify and analyze the significance of potential process hazards and make recommendations for eliminating hazards, for reducing the consequences of potential accidents and for improving general facility safety. Essential training for management, engineering (design, process, chemical, facilities, instrumentation and control), operations and safety of process operations, safety/environment personnel, plant operators, area managers and maintenance personnel. X10 Refining The Primer on Refinery and Petrochemical Industry Equipment Trainer: Ted Princiotto Course Synopsis: A fundamental course to provide participants with an overview of the types of equipment used in the refining and petrochemical industry. While any one piece of equipment is worthy of a five day course, this course is intended to present the fundamental concepts of operation and design and the role that codes and standards play in equipment selection and design. For recent graduate engineers, CADD operators, project engineers and procurement specialists. 2 days
5 ME#45 Assessment of Process Hazards, Risk and Appropriate Protection Systems Trainer: Martin Gollin Course Synopsis: A well covered course on the process hazards which deals with concept of risk & methodologies. The course also covers LOPA, various types of protection that can be employed, including the basic process control system, relief devices, and Safety Interlock Systems& many more ME#12 A to Z of Pressure Vessels Trainer: Ramesh Tiwari 1 2 days Course Synopsis: While the ASME Code provides detailed guidelines for the design of pressure vessels, it does not adequately cover the requirements for fabricating them. This course attempts to bridge the gap by explaining the entire process of receiving the order in a fabrication shop, planning the sequence of manufacturing operations, requisitioning of components, examining various methods employed in the fabrication of pressure vessels, the examinations by shop personnel as well as third-party inspectors, testing of pressure vessels and finally the preparation of code documents. ME#14 Know Your Shell & Tube Heat Exchangers Trainer: Ramesh Tiwari 1 2 days Course Synopsis: Shell-and-tube heat exchangers are used extensively throughout the power and process industry, and as such a basic understanding of their design, construction and performance is important to the practicing engineer. This course provides an overview of the design, fabrication, inspection and maintenance of this heat exchanger type, focusing on both the thermal as well as mechanical aspects. ME#61 Course Synopsis: Upon completion of this course, participants will have gained a practical understanding of the concepts of Risk-Based Inspection (RBI) and the means to implement an RBI program within their organization using both API recommended practices and industry-accepted programs. They will also be introduced to the primary damage mechanisms that cause deterioration and failure in process plant equipment. Refinery and Petrochemical Industry Material Selection and Corrosion 3 4days ME#06 Trainer: Tony Scribner, P.E. Course Synopsis: An essential course for engineers, designers, inspection and maintenance personnel to understand basic corrosion and metallurgical concepts, deterioration mechanisms, recognition and evaluation techniques to avoid failures and costly downtime. X11 Seismic Design and Retrofit of Equipment and Piping Course Synopsis: This course covers the requirements for the seismic design or retrofit of critical plant and facility systems and equipment in accordance with the national standards and regulations from FEMA and thelatestasmeandubccodes. Risk-Based Inspection Implementation and the Effects of Damage Mechanisms Trainer: Leslie L. Loushin 4 days
API 579/ASME FFS-1 FITNESS FOR SERVICE PART 1 (LEVEL 1 & 2)
LAST UPDATED 09-02-2018 API 579/ASME FFS-1 FITNESS FOR SERVICE PART 1 (LEVEL 1 & 2) COURSE DURATION: 7 DAYS COURSE DESCRIPTION Fitness-For-Service (FFS) is essential guideline for a run-repair-replace
More informationOPTIMIZING TURNAROUND MAINTENANCE PERFORMANCE
OPTIMIZING TURNAROUND MAINTENANCE PERFORMANCE Farag Elfeituri 1*, Salah Massoud Elemnifi 2 1 Department of Industrial & Manufacturing Systems Engineering University of Garyounis P.O. Box 9476 Benghazi,
More informationAPI 571 CORROSION & MATERIALS PROFESSIONAL CERTIFICATION PREPARATION PROGRAM
LAST UPDATED 09-11-2017 API 571 CORROSION & MATERIALS PROFESSIONAL CERTIFICATION PREPARATION PROGRAM SUPPLEMENTAL INSPECTION CERTIFICATION PROGRAM DAMAGE MECHANISMS AFFECTING FIXED EQUIPMENT IN THE REFINING
More informationAPI 571 CORROSION & MATERIALS PROFESSIONAL CERTIFICATION PREPARATION PROGRAM
LAST UPDATED 29-11-2018 API 571 CORROSION & MATERIALS PROFESSIONAL CERTIFICATION PREPARATION PROGRAM SUPPLEMENTAL INSPECTION CERTIFICATION PROGRAM DAMAGE MECHANISMS AFFECTING FIXED EQUIPMENT IN THE REFINING
More informationTraining and Development
Page 1 Training and Development The success of every company depends of each employee's understanding of the business's key components. Employee training and development will unlock the companies' profitability
More informationBuilding Operational Management Excellence
Building Operational Management Excellence A Manager is a person who guides and changes their business organization into one that helps achieve the strategic business goals of their organization. Introduction
More informationCQ ENGINEERING a Division of
CQ ENGINEERING a Division of TECHNICAL INNOVATION ENGINEERING INSPECTION The CQ Group, LLC A Full Service Engineering Firm Specializing in High Tech Design and Innovation for Industrial and Manufacturing
More informationMATERIALS OF CONSTRUCTION FOR PROCESS EQUIPMENT AND PIPING SYSTEMS
MATERIALS OF CONSTRUCTION FOR PROCESS EQUIPMENT AND PIPING SYSTEMS SECTOR / ENGINEERING NON-TECHNICAL & CERTIFIED TRAINING COURSE Appropriate material selection is the cornerstone of pressure equipment
More informationASME B31 Piping, Construction, Inspection, Maintenance, Repair & Integrity Assessment & Re-Rating (ASME B31.3 & API 570)
Repair & Integrity Assessment & Re-Rating (ASME B31.3 & API 570) TRAINING METHODOLOGY This interactive training course includes the following training methodologies as a percentage of the total tuition
More informationCommon Operating Problems
SYDNEY Pressure Vessels Field Manual Common Operating Problems and Practical Solutions Maurice Stewart Oran T. Lewis AMSTERDAM BOSTON HEIDELBERG LONDON NEW YORK OXFORD PARIS SAN DIEGO SAN FRANCISCO SINGAPORE
More informationASME VIII DIVISION 1 PRESSURE VESSEL CODE SIMPLIFIED
LAST UPDATED 18-01-2018 ASME VIII DIVISION 1 PRESSURE VESSEL CODE SIMPLIFIED COURSE DURATION: 4 DAYS Master the best practices of ASME Pressure Vessel Fabrication Code to reduce costs, improve plant reliability
More informationTUV / IICS 3.1 CERTIFIED WELDING INSPECTOR & API 577 WELDING INSPECTION & METALLURGY
LAST UPDATED 06-04-2018 TUV / IICS 3.1 CERTIFIED WELDING INSPECTOR & API 577 WELDING INSPECTION & METALLURGY COURSE DURATION: 7 DAYS ARE YOUR INSPECTORS / ENGINEERS PREPARED TO DEAL WITH THE RISING DEMAND
More informationSECTION 2.0 REFERENCES
SECTION 2.0 REFERENCES 2.1 Standards... 1 2.2 Other References... 3 This page intentionally left blank. September 2010 API Recommended Practice 571 2-1 2.1 Standards The following standards, codes and
More informationMaterials Group Asset Integrity Management. Maximizing Return on Assets while Minimizing Risk
Materials Group Asset Integrity Management Maximizing Return on Assets while Minimizing Risk 2010 AIM Objectives Asset Integrity Management, AIM, is a broad group of tools to maintain plant assets in a
More informationAdvance Overview of Energy Optimization for the Processing and Power Industry
Page 1 of 7 Advance Overview of Energy Optimization for the Processing and Power Industry Introduction The success of every company depends of each employee's understanding of the key business components.
More informationOverview of ASME Post Construction Activities
Overview of ASME Post Construction Activities Bob Sims, Becht Engineering Co., Inc., Liberty Corner, NJ Phone (908) 580-1119, e-mail: bsims@becht.com Introduction Traditionally, International Codes and
More informationAdvanced Training for Pressure Relieving and Flaring Systems
Page 1 of 6 Advanced Training for Pressure Relieving and Flaring Systems The success of every company depends of each employee's understanding of the key business components. Employee training and development
More informationMECHANICAL ENGINEERING ESSENTIALS SECTOR / ENGINEERING
MECHANICAL ENGINEERING ESSENTIALS SECTOR / ENGINEERING TECHNICAL & CERTIFICATE OF ATTENDANCE TRAINING COURSE The Mechanical Engineering Essentials Training Course Will Enable Technical Personnel To Familiarise
More informationENSURING SAFETY, QUALITY AND EXCELLENCE
ENSURING SAFETY, QUALITY AND EXCELLENCE INTRODUCTION HEALTH, SAFETY, ENVIRONMENT AND QUALITY Health, Safety, Environment and Quality (HSEQ) are the cornerstones of Verwater s operations we aim to be best
More informationSURFACE PRODUCTION OPERATIONS
Training Title SURFACE PRODUCTION OPERATIONS Training Duration 5 days Training Venue and Dates Surface Production Operations 5 29 Sep 03 Oct $3,750 Abu Dhabi, UAE In any of the 5 star hotel. The exact
More informationAPI 571 Damage Mechanisms Affecting. Fixed Equipment in the Refining Industry WHO SHOULD ATTEND TRAINING METHODOLOGY
TRAINING METHODOLOGY WHO SHOULD ATTEND This interactive training workshop includes the following training methodologies as a percentage of total tuition hours:- 50% Lectures 30% Workshops, Group Work &
More informationPressure Equipment Repair and Alteration Requirements
the pressure equipment safety authority Pressure Equipment Repair and Alteration Requirements AB-513 Edition 3, Revision 0 - Issued 2018-01-30 Table of Contents FOREWORD... iii 1.0 INTRODUCTION... 1 2.0
More informationPipeline Integrity Management and Corrosion Prevention
Pipeline Integrity Management and Corrosion Prevention 28 April - 30 April 2015 Ibis Lagos Airport, Nigeria Partner 1 CONTENTS Course Overview About the Course Facilitator Day 1 Day 2 Day 3 3 5 6 7 8 2
More informationASME B31.3 Process Piping
ASME B31.3 Process Piping Charles Becht IV, PhD, PE Don Frikken, PE Instructors BECHT ENGINEERING COMPANY, INC. Flexibility Analysis - 1 Piping Development Process 1. Establish applicable system standard(s)
More informationStorage Tank Design, Construction and Maintenance
Storage Tank Design, Construction and Maintenance Introduction The success of every company depends of each employee's understanding of the key business components. Employee training and development will
More informationBoiling Water Reactor Vessel and Internals
Boiling Water Reactor Vessel and Internals Program Description Program Overview As boiling water reactors have aged, various forms of operation-limiting stress corrosion cracking have appeared, first in
More informationM9C 1A3 VELO (PH) (FX)
PROFESSIONAL DEVELOPMENT COURSES ANRIC Enterprises Inc. 701 Evans Ave, Suite 202 Toronto, ON M9C 1A3 (PH) 416-253-9459 (FX) 416-252-2553 www.anric.com PROFESSIONAL DEVELOPMENT COURSES CONTENTS INTRODUCTORY
More informationAvailable online at ScienceDirect. Procedia Engineering 86 (2014 )
Available online at www.sciencedirect.com ScienceDirect Procedia Engineering 86 (2014 ) 597 605 1st International Conference on Structural Integrity, ICONS-2014 Corrosion Risk Analysis, Risk Based Inspection
More informationInspection Practices - Boilers and Pressure Vessels
Hewlett-Packard Inspection Practices - Boilers and Pressure Vessels December 20-22, 2017 3 - Day Technical Program FAUJI FERTILIZER COMPANY LTD. Course Overview Boilers and Pressure Vessels: Boilers and
More informationEngineering Services Storage Tanks Pressure Vessels Pipelines Tank Farms Terminals Refineries Plants
Engineering Services Storage Tanks Pressure Vessels Pipelines Tank Farms Terminals Refineries Plants Shell to Floating Roof Gap Shell Verticality in Plan View TechGroup and TechnoSoft Strategic planning
More informationCENTRIFUGAL COMPRESSORS MAINTENANCE & FAILURE ANALYSIS
Training Title CENTRIFUGAL COMPRESSORS MAINTENANCE & FAILURE ANALYSIS Training Duration 5 days Training Dates & Venue Centrifugal Compressors Maintenance & Failure Analysis 5 14 18 Apr $3,750 Riyadh, KSA
More informationOPERATION SKILLS ENHANCEMENT-MEASUREMENT & INSTRUMENT FOR PROCESS VARIABLES
Training Title OPERATION SKILLS ENHANCEMENT-MEASUREMENT & INSTRUMENT FOR PROCESS VARIABLES Training Duration 5 days Training Venue and Dates REF PE015 Operation Skills Enhancement -Measurement & Instrument
More informationAdvanced Course in Building Operational Excellence in the Operation s Team
Page 1 of 8 Introduction Advanced Course in Building Operational Excellence in the Operation s Team The success of every company depends of each employee's understanding of the key business components.
More informationFrazier Reliability Solutions
Frazier Reliability Solutions Mechanical Integrity Audit Checklist Location: Completed By: Date: MI Program Management Yes No Does the company and/or site have a documented MI policy? Does the MI program
More informationMonitor Gas Flaring & Effluent Water Disposal
Training Title Monitor Gas Flaring & Effluent Water Disposal Training Duration 5 days Training Certificate Define Management Consultants Certificate of course completion will be issued to all attendees.
More informationMONITOR GAS FLARING & EFFLUENT WATER DISPOSAL
Training Title MONITOR GAS FLARING & EFFLUENT WATER DISPOSAL Training Duration 10 days Training Venue and Dates Monitor Gas Flaring & Effluent Water Disposal 10days 15-26 June $7,000 Dubai, UAE Training
More informationD a v i d E. H e n d r i x, P. E.
D a v i d E. H e n d r i x, P. E. RESUME Experience: 2010 1990 2005 2002 15823 N. Barkers Landing Houston, TX 77079 281/556-8774 david.hendrix@hghouston.com www.hghouston.com President, The Hendrix Group
More informationOIL & GAS DOWNSTREAM ASSET OPTIMISATION AND COMPLIANCE FOR PROCESS INDUSTRIES, STORAGE AND DISTRIBUTION
OIL & GAS DOWNSTREAM ASSET OPTIMISATION AND COMPLIANCE FOR PROCESS INDUSTRIES, STORAGE AND DISTRIBUTION COSTAIN DOWNSTREAM SERVICES Cost effective and risk managed asset optimisation and compliance for
More informationFUNDAMENTALS OF PROCESS & MECHANICAL ENGINEERING
Training Title FUNDAMENTALS OF PROCESS & MECHANICAL ENGINEERING Training Duration 5 days Training Date Fundamentals Of Process & Mechanical Engineering 5 03 07 May $4,250 Dubai, UAE In any of the 5 star
More informationCC038 Design, Inspection, Repair and Maintenance of Concrete Structure in Petrochemical Plants
CC038 Design, Inspection, Repair and Maintenance of Concrete Structure in Petrochemical Plants H.H. Sheik Sultan Tower (0) Floor Corniche Street Abu Dhabi U.A.E www.ictd.ae ictd@ictd.ae Course Introduction:
More informationASME B31.3 Process Piping. 19. What s Different in B31.1
ASME B31.3 Process Piping Charles Becht IV, PhD, PE Don Frikken, PE Instructors BECHT ENGINEERING COMPANY, INC. What s Different in B31.1-1 19. What s Different in B31.1 Scope Organization of the Code
More informationContents. About Us 2. Engineering Services 3. Design 4. Welding Inspection and Engineering Services 5. Rope Access NDT 6
Contents About Us 2 Engineering Services 3 Design 4 Welding Inspection and Engineering Services 5 Rope Access NDT 6 Audit, QA&QC Expediting Services 7 Supplier Audits 8 Owner Representation 9 PED&TPED
More informationTraining Title MONITOR GAS FLARING & EFFLUENT WATER DISPOSAL Training Duration 5 days Training Date Monitor Gas Flaring & Effluent Water
Training Title MONITOR GAS FLARING & EFFLUENT WATER DISPOSAL Training Duration 5 days Training Date Monitor Gas Flaring & Effluent Water 5 DAYS 06-10 August 2017 $4,000 Dubai, UAE Disposal In any of the
More informationPiping Vibration Risks and Integrity Assessment
Piping systems are subject to vibration induced failures. To mitigate this integrity risk, a piping vibration assessment is conducted during the design phase and high risk locations are tested during operation.
More informationPROLONG THE INTEGRITY OF HIGH ENERGY PIPING SYSTEMS: UNIT SPECIFIC STRATEGIC PLANNING
2013 Thielsch Engineering, Inc. Pamela Smoske, Executive Director of Development and Operations; 4-SYTE Systems PROLONG THE INTEGRITY OF HIGH ENERGY PIPING SYSTEMS: UNIT SPECIFIC STRATEGIC PLANNING High-energy
More informationApplication for an Ontario Certificate of Authorization For businesses based Outside Ontario CSA N285.0 Nuclear Components
345 Carlingview Drive PRINT Click to clear On completion, send this form to the attention of Boilers and Pressure Vessels Safety at the top left TSSA address. Company: (Legal Company Name and Corporation
More informationPetrosync Distinguished Instructor Mandar Mulay
Shell and Tube Heat Exchangers : Mechanical Design (ASME/TEMA), and Considering Operation & Maintenance Improve Your Heat Exchanger Performance by Maximizing Your Mechanical Design, and Considering Operation
More informationS u p e r i o r C r a f t S m e n S u p e r i o r r e S u l t S
Superior Craftsmen Superior Results n a market of intense competition and razor-thin margins, maintaining your critical plant equipment at peak performance is more than a priority; it s a business necessity.
More informationEEP EEP. Employability Enhancement Program for Engineers. Fresh Engineers. Industry Expectations. Duration: 4 Months
Employability Enhancement Program for Engineers EEP Internationally accredited certification Fresh Engineers EEP Bridging Knowledge & Skill gaps Industry Expectations Duration: 4 Months From www.tracezglobal.com
More informationWELDING ENGINEERING FABRICATION
WELDING ENGINEERING FABRICATION Safety Our safety department is structured for optimal safety performance, communication and coverage. Safety is our top priority Our management team has over 280 years
More informationAsset integrity solutions. Improve integrity and reduce costs through more effective asset management. prime. Risk. Assessment.
Opportunity Asset integrity solutions Improve integrity and reduce costs through more effective asset management Risk Competency prime Training & Development Value Creation Risk Management 2 ASSET INTEGRITY
More informationAsset Integrity Services. A commitment to excellence in Non-Destructive Testing & Inspection.
Asset Integrity Services. A commitment to excellence in Non-Destructive Testing & Inspection. w w w. A p p l u s R T D. c o m This brochure is about the world of Applus RTD Its clients Its solutions Its
More informationAccreditation of Hot Tap Organizations
Accreditation of Hot Tap Organizations TSSA Guide for Survey Teams Technical Standards & Safety Authority Boiler & Pressure Vessels Safety Division 3300 Bloor Street West 14 th Floor, Centre Tower, Etobicoke,
More informationBODY OF KNOWLEDGE API-653 ABOVEGROUND STORAGE TANK INSPECTOR CERTIFICATION EXAMINATION
BODY OF KNOWLEDGE API-653 ABOVEGROUND STORAGE TANK INSPECTOR CERTIFICATION EXAMINATION October 2009 (Replaces November 2008) API Authorized Aboveground Storage Tank Inspectors must have a broad knowledge
More informationHow are Industry Standards, Engineering Codes, Best Management Practices and Other Measures of Compliance Being Met by Facilities?
How are Industry Standards, Engineering Codes, Best Management Practices and Other Measures of Compliance Being Met by Facilities? More on what we re seeing at inspections 1 RMP Facility Chemicals Ammonia
More informationMechanical Engineering Fundamentals Aug $3,750 Abu Dhabi, UAE
Training Title MECHANICAL ENGINEERING FUNDAMENTALS Training Duration 5 days Training Venue and Dates Mechanical Engineering Fundamentals 5 25 29 Aug $3,750 Abu Dhabi, UAE In any of the 5 star hotel. The
More informationSHARING YOUR VISION. BUILDING SUCCESS.
SHARING YOUR VISION. BUILDING SUCCESS. WE ARE MORE THAN JUST BUILDERS PCL Industrial Services is a diversified, full-service heavy industrial contractor and fabricator servicing a client base in the oil
More informationENGINEERING SERVICES
ICONS... ICONS ENGINEERING SERVICES Contact us at: Ph: (+91) 9704 038 648 E-mail: contactus@iconsengg.com Web: http:// ABOUT US A group of professionals imbibed with the power of knowledge thru many years
More informationApplication for an Ontario Certificate of Authorization For Ontario based businesses CSA N285.0 Nuclear Components
345 Carlingview Drive PRINT Click to clear On completion, send this form to the attention of Boilers and Pressure Vessels Safety at the top left TSSA address. Company: (Legal Company Name and Corporation
More informationIn-House Training Programs 2012 Oil, Gas, Process / Engineering
In-House Training Programs 2012 Oil, Gas, Process / Engineering An Introduction to Process Plant Start-up & Troubleshooting Basic Petroleum Technology Basic of Gas Compression Dehydration/Conditioning
More informationCONTENTS. CHAPTER I Up-to Day Methods of the Non-Destructive Inspection of Pipelines Systems
CONTENTS CHAPTER I Up-to Day Methods of the Non-Destructive Inspection of Pipelines Systems 1. Standard non-destructive inspection methods used for revealing, locating, identifying and assessing flaws
More informationI. Curriculum Criteria: Conduct of Operations (Shift Operations)
I. Curriculum Criteria: Conduct of Operations (Shift Operations) Overview The ability of operating teams to effectively monitor and control manufacturing processes is impacted by many factors. The term
More informationA RISK BASED MAINTENANCE APPROACH for PSM FACILITIES
A RISK BASED MAINTENANCE APPROACH for PSM FACILITIES Mary Kay O Conner O Process Safety Center October 2007 Symposium Adrian L. Sepeda, P.E. President, A. L. Sepeda Consulting Inc. COMMON MAINTENANCE APPROACHES
More informationMaterials Assessment Services
Materials Assessment Services ANSTO is a specialist materials assessment provider offering an integrated service concentrated on maximizing the performance of capital assets and infrastructure. With over
More informationAsset Integrity Management. Enhance Process Safety
Asset Integrity Management To Enhance Process Safety S.K.Bagchi Addl. Director (Asset Integrity) Oil Industry Safety Directorate SIZE OF THE HYDROCARBON INDUSTRY IN INDIA Total installed refining capacity
More informationCOMPLETE REVISION April Process Industry Practices Piping. PIP PNC00004 Piping Stress Analysis Criteria for ASME B31.
April 2012 Process Industry Practices Piping PIP PNC00004 Piping Stress Analysis Criteria for ASME B31.3 Metallic Piping PURPOSE AND USE OF PROCESS INDUSTRY PRACTICES In an effort to minimize the cost
More informationAsset Optimization for Power Plant
Asset Optimization for Power Plant Date: 30 31 March 2015 Time: 0900-1730 hours Venue: Amara Hotel 165 Tanjong Pagar Rd Singapore 088539 Full Course Fee: S$1,979.50 (inclusive GST) Singapore Workforce
More informationPLASTICS and POLYMERS
: SELECT YOUR CAREER INTEREST 45 PLASTICS and POLYMERS The Mid-Ohio Valley enjoys a significant competitive advantage for the plastics and polymers industry. Currently, the region s concentration of plastics
More informationth Avenue NE, Calgary, Alberta T1Y 4T corrosion.com
2711 39 th Avenue NE, Calgary, Alberta T1Y 4T8 403 208 7889 www.ammonite corrosion.com Introduction Ammonite Corrosion Engineering represents over 60 years of corrosion engineering experience in the oil
More informationASSet InteGrIty MAnAGeMent PArtnerInG to ACHIeVe your InSPeCtIOn, MAIntenAnCe, AnD SAFety OBJeCtIVeS
asset integrity management PARTNERING TO ACHIEVE YOUR INSPECTION, MAINTENANCE, AND SAFETY OBJECTIVES WWW.SGS.COM/AIM ASSET INTEGRITY MANAGEMENT - AIM An asset has integrity when it is operated and maintained
More informationBoiling Water Reactor Vessel and Internals Project (QA)
Boiling Water Reactor Vessel and Internals Project (QA) Program Description Program Overview As boiling water reactors have aged, various forms of operation-limiting stress corrosion cracking have appeared,
More informationTechnical Summary. 1. Purpose
1. Purpose Technical Summary The purpose of this procurement is to establish a contract to provide mechanical and electrical plant installation works in the following areas on the ITER Site in Saint-Paul
More informationOUR FFICIENCY ARTNER
OUR FFICIENCY ARTNER throughout the water-steam cycle An unrivalled service offering for the power, Oil & Gas, chemical and process industries. ASSET LIFECYCLE INTEGRITY PARTNER DEDICATED TO CONTINUITY
More informationJoint ICTP-IAEA Essential Knowledge Workshop on Deterministic Safety Analysis and Engineering Aspects Important to Safety. Trieste,12-23 October 2015
Joint ICTP- Essential Knowledge Workshop on Deterministic Safety Analysis and Engineering Aspects Important to Safety Trieste,12-23 October 2015 Safety classification of structures, systems and components
More informationOWNER USER INTEGRITY MANAGEMENT SYSTEM WRITTEN DESCRIPTION CHECKLIST AB-512(b)
Company Name: Written Description of QMS Title and Rev. Status: Person who is responsible for preparing the owner s QMS written description: Name: Title: Telephone No.: ( ) Fax No.: ( ) Cell No.: ( ) E-Mail:
More informationCONDITION BASED MAINTENANCE
Application Guide AG 5/2001 CONDITION BASED MAINTENANCE - An evaluation guide for building services A Seaman Department of Trade and Industry Application Guide AG 5/2001 CONDITION BASED MAINTENANCE - An
More informationList of forms CLAP with correspondence WGP /68/UE
List of forms CLAP with correspondence WGP - 204/68/UE CLAP number CLAP version Adopted by CLAP Subject WGP number Adopted by WGP X00 /03/205 Equipment covered by the regulations on transport of dangerous
More informationCUSTOMER SERVICES YOUR PARTNERSHIP WITH THE WORLD LEADER IN INDUSTRIAL GASES
CUSTOMER SERVICES YOUR PARTNERSHIP WITH THE WORLD LEADER IN INDUSTRIAL GASES Air Liquide Group Air Liquide Engineering & Construction The world leader in gases, technologies and services for Industry and
More informationDESTEC ON-SITE SERVICES
DESTEC ON-SITE SERVICES DESTEC ON-SITE SERVICES Destec engineering has specialised in on-site machining for over 30 years. Our wide range of versatile in-house designed and manufactured portable machine
More informationAl Khobraa Al Motamiyzon Liltadreeb Technical Training Plan.
Al Khobraa Al Motamiyzon Liltadreeb 2016 Technical Training Plan www.alkhobraa.com January NE 200 Nuclear Power Reactors Operations Jan 10-14 4,250 Dubai, PE500 DE500 Introduction to Exploration and Production
More informationBetter Maintenance Strategies Improve Operations and Maintenance
Table of Contents teaser: Combining smart instruments, analyzers and valves with a modern asset management system can provide faster response to incidents, enable proactive maintenance and reduce downtime.
More informationCorrosion: The New Process Variable Online, Real-time, Saving Money
Corrosion: The New Process Variable Online, Real-time, Saving Money Russell D. Kane/Honeywell Process Solutions Current estimates show the global process industries spend $50 billion annually on corrosion
More informationTechnical solutions for energy recovery
Technical solutions for energy recovery We are Uniper We are a leading international energy company with operations in more than 40 countries and around 13,000 employees. We combine a balanced portfolio
More informationCRAFTSMEN SERVING THE OIL / GAS & MANUFACTURING INDUSTRY
CRAFTSMEN SERVING THE OIL / GAS & MANUFACTURING INDUSTRY ABOUT R-TEX Founded in 1996, R-Tex Services has developed into a multi-disciplinary construction firm focused on developing projects and solutions
More informationIHC TRAINING INSTITUTE DREDGE TRAINING ROYALIHC.COM /SERVICES/TRAINING
ROYALIHC.COM /SERVICES/ IHC INSTITUTE DREDGE IHC INSTITUTE LOOK BEYOND YOUR HORIZON Educating your crew to open up the full potential of your vessel and equipment trainers with extensive experience in
More informationTurnaround And Major Capital Project Services
Turnaround And Major Capital Project Services ENERGY ENVIRONMENTAL Babcock & Wilcox (B&W) is a leading supplier of turnaround and capital project services for customers in a wide variety of industries,
More informationProcess & Mechanical Engineering Essentials
An ISO 9001:2015 & ISO 29990:2010 Certified Company Process & Mechanical Engineering Essentials 30 September - 11 October 2018 Dubai, United Arab Emirates 28-SEP-17 Process & Mechanical Engineering Essentials
More informationASME Code, Section VIII, Division 1: DESIGN AND FABRICATION OF PRESSURE VESSELS Presenter: Fahim Shadid
ASME Code, Section VIII, Division 1: DESIGN AND FABRICATION OF PRESSURE VESSELS Presenter: Fahim Shadid ABOUT THE PRESENTER: FAHIM SHADID Fahim Shadid, P.E has a BS degree in Mechanical Engineering and
More informationCOMPRESSORS: DESIGN, OPERATION AND MAINTENANCE
OPERATION AND MAINTENANCE Enhancing compressor uptime and reducing operating costs through best practices and effective maintenance Presenter: Fred Geitner ABOUT THE PRESENTER: FRED GEITNER P.ENG Mr. Geitner
More informationOPERATIONS AND MAINTENANCE TECHNICIAN IV (MECHANICAL) (JOURNEY)
OPERATIONS AND MAINTENANCE TECHNICIAN IV (MECHANICAL) (JOURNEY) Group-Section: Water System Operations - Various FLSA Status: Non-Exempt Bargaining Unit: AFSCME Classification: Operations and Maintenance
More informationYour Service Partner Service Solutions for the Oil and Gas Industry
Your Service Partner Service Solutions for the Oil and Gas Industry A Partner You Can Trust Customized and innovative service solutions help you to reduce maintenance time and cost, and improve the efficiency
More informationCodes and Standards for CCS
Review Presentation Codes and Standards for CCS 2 nd ICEPE Efficient Carbon Capture for Coal Power Plants Frankfurt/Main, 20 June 2011 VDMA Page 1 20 June 2011 Overview A. Why standards in the first place?
More informationMaterials Issues Related to Reactor Design, Operation & Safety
Materials Issues Related to Reactor Design, Operation & Safety Professor R. G. Ballinger Department of Nuclear Engineering Department of Materials Science & Engineering 22.39 Lecture 1-1 Objective To Develop
More informationTHE PIPING INTEGRITY MANAGEMENT CHALLENGE
ASSET INTEGRITY INTELLIGENCE THE PIPING INTEGRITY MANAGEMENT CHALLENGE LAZA KRSTIN, Principal Consultant at ABB FERNANDO VICENTE, Asset Integrity & Reliability Management Consultant at ABB VOLUME 23, ISSUE
More informationLIVING WITH DEFECTS: REPLACE / REPAIR OR PROVE FIT-FOR-SERVICE?
1/14 LIVING WITH DEFECTS: REPLACE / REPAIR OR PROVE FIT-FOR-SERVICE? Ron Selva B.Sc, C.Eng, F.I.Mech.E Engineering Director PP SIMTECH Solutions Ltd, Enterprise Centre, Washington Street, Bolton BL3 5EY,
More informationAPI 653 Training Course
API 653 Training Course The API 653 Classes consist of "Pre-Course Home Study" materials and "5 days of Classroom" instructor lead training. Registration for the API 653 Training Course should be received
More informationMaximize productivity and safety with proven technologies and advanced solutions
downs T R EAM Refining, Petrochemical, and Fertilizer Maximize productivity and safety with proven technologies and advanced solutions bhge.com Maximizing the profitability of your plant is the motivation
More informationCanada. Pulp and Paper Industry PI Specifics. How can process integration help me?
How can process integration help me? Process integration (PI) is a very efficient approach to improving the energy efficiency of large and complex industrial facilities. PI refers to the application of
More informationPROFESSIONAL BIOGRAPHY JERRY D. BYRD, P.E.
PROFESSIONAL BIOGRAPHY JERRY D. BYRD, P.E. PRESENT POSITION: President - Byrd Coatings Consultants, Inc. EDUCATION: Bachelor of Science, Chemical Engineering Washington University, St. Louis, MO., 1957
More information