NEW HEAT RECOVERY AND FILTRATION UNITS

Transcription

1 NEW HEAT RECOVERY AND FILTRATION UNITS Regulation on heating installations in buildings

2 OUR COMMITMENT TO THE ENVIRONMENT Sodeca has begun a new stage of study and design of new trends in ventilation which will help to preserve the environment and to make the energy saving which so much concerns today s society. SODECA has concentrated its activity on the production of industrial fans, ventilation systems and extractors for the removal of smoke in case of fire since 1983, when it was founded. SODECA s fans and extractors are present in all European countries and in many parts of the world, thanks to the quality of the product and the methods of research and development used. Our quality procedures used and certified by BUREAU VERITAS, in accordance with ISO 9001:2008, are another of the reasons which make SODECA one of the best and most renowned fan manufacturers in Europe. Without a doubt, the most important factor to achieve our objectives is the human factor, the great professionals who work at your service, offering not only ventilation equipment but also solutions to any ventilation need required by our customers. We sincerely offer you the possibility of visiting our facilities in Sant Quirze de Besora, with over 16,000 square metres of built area, where you will be able to see our fan manufacture with perfect clarity and with the highest standards of quality, complying with the ISO and AMCA standards. This catalogue is only a small part of our possibilities. Do not hesitate to contact us. We will put all our experience and our human resources at your disposal. To obtain an improvement in energy efficiency of fans and of ventilation facilities, the engineering department of Sodeca has balanced the energy consumption of the fans with their maximum performance, in the habitual areas of work. This has required a restructuring of the curves and their presentation in this and future Sodeca catalogues. installations headquarters of SODECA s.a., at Sant Quirze de Besora and manufacturing plant in Santiago de Chile.

3 HEAT RECOVERY FILTRATION UNITS Sodeca has begun a new stage of study and design of new products and trends related with ventilation, which will help to preserve the environment and to make the energy saving which so much concerns today s society. Our aims are: Energy saving and in consequence savings of natural resources and also economic savings Improvement in energy efficiency Reduction of acoustic contamination Protection of the environment In order to fulfil our objectives, SODECA is presenting its new products in this catalogue so as to fulfil the demands and guidelines of R.I.T.E. (Regulations of Heat Installations in Buildings), and to achieve with these series a real energy saving in air-conditioning installations: R.I.T.E. Regulation on heating installations in buildings HEAT RECOVERY UNITS FILTRATION UNITS Examples of installations according to RITE: IDA 1 ODA 2 A FILTRATION UNIT + HEAT RECOVERER UNIT B FILTRATION UNIT Translation of literals from the graph Filtro F9: F9 Filter Prefiltro F7: F7 Pre-filter Extracción aire del local: Extraction of air from the premises Entrada aire fresco y limpio: Entry of frech, clean air Impulsión aire al local: Impulsion of aire from the premises Salida aire viciado: Outlet of used air A: Solutions with recuperators or combinations of recuperators and filtration units B: Solutions with filtration units

4 HEAT RECOVERY UNITS COMFORT AND ENERGY SAVING With energy, heat or cold recuperators it will no longer be a problem to combine the ventilation with the air-conditioning or heating systems. Apart from recovering and conserving energy, the recuperators, with their entry filters and air outlet, will make the environment clean and comfortable. OPERATION The heat recuperator operates by means of the combination of two centrifugal fans with a low sound level, where one of them carries out the extraction of the used air from the interior of the premises to the street, and the other drives fresh air from outside into the interior of the premises. The two circuits cross without mixing, in a plate exchanger, where the heat from the outgoing air is transferred to the fresh air from the exterior, heating it up. In this way, we manage to recover a high percentage of the energy used to heat up or cool down the air in the interior of the premises and re-use it. Without the use of the recuperator, this energy would be totally lost. Operating diagram: LOCAL AREA B-P STREET AREA Extraction of air from the premises FS DTJ P FE TL Entry of fresh clean air Impulsion of air from the premises TJ VI BE INT P VE TE Outlet of used air VE: Air extractor VI: Impulsion fan INT: Exchanger BE: Electrical battery FE: Entry filter F-6 FS: Entry filter F-6 TJ: Temperature sensor for driven air TL: Temperature sensor for incoming air TE: Temperature sensor for outgoing air DTJ: Humidity and temperature sensor P: Pressure inlet BP: By-Pass Hatch

5 FILTRATION UNITS SODECA is presenting the new series of filtration units so as to fulfil the guidelines of R.I.T.E. (Regulations of Heat Installations in Buildings), to fulfil the demands of energy efficiency and air quality in the interior of buildings. INTERIOR AIR QUALITY The buildings will have a ventilation system to bring in an external air flow which avoids, in the different premises, the formation of high concentrations of contaminants. The external air will be brought in properly filtered. EXTERNAL AIR QUALITY CLASSIFICATION The quality of external air used to bring air into the interior of the building will be classified in accordance with the levels listed below. Pure air which may temporarily contain solid particles IDA 1 Top-quality air Application: hospitals, clinics, laboratories and nurseries ODA 1 Air with high concentrations of particles IDA 2 Good-quality air Application: offices, old people s homes, communal areas in hotels, classrooms, swimming pools, museums and premises of similar characteristics ODA 2 Air with high concentrations of gaseous contaminants IDA 3 Average quality air Application: commercial buildings, cinemas, theatres, auditoria, hotel rooms, restaurants, cafeterias, bars, gymnasia and premises of similar characteristics ODA 3 Air with high concentrations of gaseous contaminants and particles Low quality air ODA 4 IDA 4 Air with very high concentrations of gaseous contaminants and particles ODA 5 FILTRATION NEEDS The minimum filtration needs to be used will be calculated according to the required internal air quality and the quality of the external air. ODA 1 ODA 2 ODA 3 IDA 1 IDA 2 IDA 3 IDA 4 Prefilter / Filter Prefilter / Filter Prefilter / Filter Prefilter / Filter F7/F9 /F8 /F7 G4/ F7/F9 /F8 /F7 G4/ F7/F9 /F8 /F7 G4/ ODA 4 F7/F9 /F8 /F7 G4/ /GF/F9* /GF/F9* /F7 G4/ F9 F8 ODA 5 (*) GF: Chemical filter between the two stages of filtration R.I.T.E. Regulation on heating installations in buildings

6 EXAMPLES OF INSTALLATION Graphic solutions for the fulfilment of minimum filtrations demanded by the R.I.T.E. (F7/F9) IDA 1 ODA 1 ODA 2 ODA 3 ODA 4 A B (/F8) IDA 2 ODA 1 ODA 2 ODA 3 ODA 4 A B (/F7) IDA 3 ODA 1 ODA 2 ODA 3 ODA 4 ODA 5 A B 6

7 (G4/) IDA 4 ODA 1 ODA 2 ODA 3 ODA 4 ODA 5 A* B (/GF/F9) IDA 1 F9 ODA 5 IDA 2 (/GF/F9) F8 ODA 5 A** B** Translation of literals from the graph Extracción aire del local: Extraction of air from the premises Impulsión aire al local: Impulsion of air from the premises Entrada aire fresco y limpio: Entry of fresh, clean air Salida aire viciado: Outlet of used air Prefiltro F7: F7 Pre-Filter Prefiltro : Pre-Filter Prefiltro G4: G4 Pre-Filter Filtro : Filter Filtro F7: F7 Filter Filtro F8: F8 Filter Filtro F9: F9 Filter Filtro GF: GF Filter Filtro F8 o F9: F8 or F9 Filter A: Solutions to the R.I.T.E. with heat recuperators or combinations of recuperators and filtration units B: Solutions to the R.I.T.E. with filtration units * Filtration performance better than required by R.I.T.E. ** Construction on demand 7

8 SUMMARY OF HEAT RECUPERATORS Pag 12 F7 F9 RIS H High-efficiency heat recovery, with cross-flow plates and operation with automatic control Designed to be installed in a horizontal position High efficiency exchanger (54%-60%) Filters for high efficiency air supply, F7 or F9 Electronics for automatic control, integrated in 400 to 1900 models Double soundproofed wall with mm. of sound insulation according to model Maximum flows from 450 m 3 /h to 6600 m 3 /h Versions: Environmental: Renewal of air without supply of heat Electrical: With supply of heating by electric batteries Water battery: With supply of heating by water batteries On request: Adiabatic module RIS V High-efficiency heat recovery, with cross-flow plates and operation with automatic control Design for vertical installation High efficiency exchanger (54%-60%) Filters for high efficiency air supply, F7 or F9 Electronics for automatic control, integrated in 260 to 1900 models Double soundproofed wall with mm. of sound insulation according to model Maximum flows from 290 m 3 /h to m 3 /h Versions: Environmental: Renewal of air without supply of heat Electrical: With supply of heating by electric batteries Water battery: With supply of heating by water batteries On request: Adiabatic module m 3 /h RIS-5000 RIS-4000 RIS-3000 RIS-2000 RIS-1900 RIS-1500 RIS-1000 RIS-700 RIS-400 RIS m 3 /h RIS P Highly efficient heat recuperators with crossed flow plates and operation with automatic control, design for horizontal installation and especially for false ceilings Pag 16 F7 F9 High efficiency exchanger (54%-75%) Filters for high efficiency air supply, F7 or F9 Electronics for automatic control, integrated in 400 to 1900 models Double soundproofed wall with mm. of sound insulation according to model Maximum flows from 450 m 3 /h to m 3 /h Versions: Environmental: Renewal of air without supply of heat Electrical: With supply of heating by electric batteries Water battery: With supply of heating by water batteries On request: Adiabatic module m 3 /h RIS P-400 RIS P-2000 RIS P-1900 RIS P-1500 RIS P-1000 RIS P-700 RIS P m 3 /h 8

9 filter F7 F7 filter + + F8 F8 filter F9 F9 filter Sound level Module Adiabatic Environmental Electrical By hot water + F8 RECUP Configurable heat recuperators with crossed flow plates, for horizontal installation (H) Exchanger with aluminium plates with efficiency between 52% and 55% Air supply filters or +F8 Galvanised steel box with built-in soundproofing Maximum flows from 500 m 3 /h to 6100 m 3 /h Versions: Environmental: Renewal of air without supply of heat On request: Adiabatic module Pag 19 m 3 /h RECUP-60 RECUP-50 RECUP-40 RECUP-30 RECUP-20 RECUP-12 RECUP-08 RECUP m 3 /h F7 RIRS Very highly efficient heat recuperators with rotating exchanger and operation with automatic control. Designed to be installed in a horizontal position High efficiency rotational exchanger (70%-77%) Filters for F7 high efficiency air supply Electronics for automatic control, integrated in 400 to 1500 models Double soundproofed wall with 50 mm. of sound insulation Maximum flows from 425 m 3 /h to 6700 m 3 /h Versions: Environmental: Renewal of air without supply of heat Electrical: With supply of heating by electric batteries Water battery: With supply of heating by water batteries m 3 /h Pag 21 RIRS-3000 RIRS-2000 RIRS-1500 RIRS-700 RIRS m 3 /h RIRS-4000 Accessories Accessories See accessories section CJFILTER Air filter boxes for circular ducts equipped with different types of filter, according to model. CJFILTER 100 Diameter 100 / / / / 400 Filters G4 / F5 / F7 F8 / F9 ADIABATIC BOX Box which incorporates an adiabatic module It contributes to the cooling of the air supply to the premises It is installed in the extraction circuit between the pre-filter and the exchanger. UNI PRO BOX-E FILTERS CJFILTER ADIABATIC BOX 9

10 SUMMARY FILTRATION UNITS Pag 24 SV/FILTER Low noise in-line duct fans with different stages of filtration Acoustic casing covered with sound absorbing material. Standard aspiration and impulsion joints to aid in duct installation. G4 +, + F8 and F7 + F9 filters according to model Easy access inspection and cleaning cover m 3 /h G4 F7 F8 F9 125/H 200/H 150/H 250/H 315/H 350/H 400/H m 3 /h Pag 28 UFR Soundproofed filtration units with sandwich panel, equipped with high-performance reaction turbine fans and different stages of filtration according to model Activation with a direct motor Built-in general bed + F8, F7 + F9 and G4 + filters according to model selected Possibility of pre-filter plus two stages of filtration Pressure inlets for filter control Built-in pressure probe F7 G4 F8 F9 m 3 /h T T T-5, T T T T T T T m 3 /h 10

11 G4 G4 filter filter F7 F7 filter F8 F8 filter F9 F9 filter Sound level F7 F8 F9 UFX Soundproofed filtration units equipped with double inlets and different stages of filtration according to model. Belt-driven Built-in general bed + F8, F7 + F9 and G4 + filters according to model selected Possibility of pre-filter plus two stages m 3 /h of filtration Easy access inspection and cleaning cover Pressure inlets for filter control Built-in pressure probe Pag 32 G4 12/12 18/18 15/15 20/20 22/22 25/25 30/ m 3 /h Pag 42 UFRX Soundproofed filtration units equipped with double inlet fans and very robust reaction turbine and different stages of filtration according to model. Belt-driven Built-in general bed + F8, F7 + F9 and G4 + filters Possibility of pre-filter plus two stages of filtration Easy access inspection and cleaning covers Pressure inlets and pressure probe for filter control On request: Absolute active carbon filters m 3 /h F7 G4 F8 F m 3 /h Accessories See accessories section FILTERS CJFILTER PRESOSTATO SI-PRESSURE CONSTANT FLOW KIT PRESSURE PROBE INT VIS TEJ GENERAL BEDPLATE SILENT- BLOCKS 11

12 RIS H/V Highly efficient heat recuperators with crossed flow plates for automatic operation and control of the recuperator, according to selected parameters of temperature and humidity (models 260 to 1900). Designed for horizontal (H) or vertical (V) installation F7 F9 UNI Controller included in RIS 260 to RIS 1900 models Features: High efficiency exchanger (54%-60%) Filters for high efficiency air supply, F7 or F9 Electronics for automatic control, integrated in 260 to 1900 models with UNI controller included Electronic for automatic control, as an accessory (BOX-E) in models 2000 to 5000, for the control it is necessary to request the UNI or PRO panel as an accessory Double soundproofed wall with 50 mm of high absorption soundproofing (models 260 with 20 mm and models with 30 mm) Input and output temperature sensor (size 1000 to 1900) Humidity sensor according to model (size 1000 to 1900) Built-in bypass hatch Tray for collecting condensation in stainless steel and with drainage valve Construction: Metallic structure Double-wall panels, with soundproofing of mm. thickness Input and output vents with airtight joint Large access doors to facilitate maintenance and cleaning. In the horizontal version, the doors are exchangeable so as to be able to carry out the maintenance on the right and the left, seen through the vents. Versions: Horizontal (H) or Vertical (V) Vertical up to size 1900 (V) Environmental: Renewal of air without supply of heat (S) Electric: With supply of heating by electric batteries (E) Water battery: With supply of heating by water batteries (W) On request: Adiabatic module Order code RIS 1000 H E D MA Accessories Model Size H: Horizontal ducts V: Vertical ducts S: Environmental E: Electric W: Water battery D: Entry of fresh, clean air from the exterior on the right-hand side K: Entry of fresh, clean air from the exterior via the left-hand side filter F7 filter F9 filter Module Adiabatic See accessories section UNI PRO BOX-E FILTERS CJFILTER ADIABATIC BOX PRESOSTATO SI-PRESSURE INT TEJ GENERAL BEDPLATE SILENT- BLOCKS 12

13 HEAT RECOVERY UNITS Technical characteristics Model Speed (r/min) Voltage (V) Current (A) Power motor (W) Max AIrflow (m 3 /h) Max. Airflow F7(m 3 /h) Thermal efficiency (%) RIS-400S x230 2x1.1 2x /F7 47 RIS-700S x230 2x1.12 2X /F7 62 RIS-1000S x230 2x0.81 2x /F7 149 RIS-1500S x230 2x1.23 2x /F7 179 RIS-1900S x230 2x2.7 2x /F7 308 RIS-2000S x400 2x2.6 2x /F7 324 RIS-3000S x400 2x4.1 2x /F7 393 RIS-4000S x400 2x4.7 2x /F7 498 RIS-5000S x400 2x6.47 2x /F7 568 RIS-260E x230 2x0.4 2x /F7 40 1x230 1 RIS-400E x230 2x1.1 2x /F7 48 1x230 2 RIS-700E x230 2x1.12 2X /F7 70 1x230 3 RIS-1000E x230 2x0.81 2x /F x400 6 RIS-1500E x230 2x1.23 2x /F x400 9 RIS-1900E x230 2x2.7 2x /F x RIS-2000E x400 2x2.6 2x /F x RIS-3000E x400 2x4.1 2x /F x RIS-4000E x400 2x4.7 2x /F x RIS-5000E x400 2x6.47 2x /F x RIS-400W x230 2x1.1 2x /F * RIS-700W x230 2x1.12 2X /F * RIS-1000W x230 2x0.81 2x /F * RIS-1500W x230 2x1.23 2x /F * RIS-1900W x230 2x2.7 2x /F * RIS-2000W x400 2x2.6 2x /F * RIS-3000W x400 2x4.1 2x /F * RIS-4000W x400 2x4.7 2x /F * RIS-5000W x400 2x6.47 2x /F * * Values measured with exterior air temperature of +18ºC and water temperature of Tin/Tout 80/60 ºC Irradiated NPS db(a) Current Total (A) Electrical B. Water B. Filter Weight Voltage Resistance EN 779 (Kg) (V) Power (kw) Thermal power (kw) Configurations Configuration D standard supply Horizontal version D Vertical version D Horizontal version K Vertical version K Translation of literals from the graph ZONA LOCAL: LOCAL AREA ZONA CALLE: STREET AREA Extracción aire del local: Extraction of air from the premises Impulsión aire del local: Impulsion of air from the premises Entrada aire fresco y limpio: Entry of fresh, clean air Salida aire viciado: Outlet of used air 13

14 Dimensions in mm Model A B C Ø D H1 H2 H3 H4 H5 W RIS-400H RIS-700H RIS-1000H RIS-1500H RIS-1900H RIS-2000H RIS-3000H Model A A1 A2 B C H1 H2 K k L l W1 W2 RIS-4000H RIS-5000H RIS-260V RIS-400V RIS-700V RIS-1000V RIS-1500V RIS-1900V Model A B C Ø D H1 X1 X2 X3 Y1 Y2 Y3 Y4 Y5 RIS-260V RIS-400V RIS-700V RIS-1000V RIS-1500V RIS-1900V

15 HEAT RECOVERY UNITS Characteristic curves RIS-260 / RIS-400 / RIS-700 RIS-1000 / RIS-1500 / RIS-1900 RIS-2000 / RIS-3000 RIS-4000 / RIS

16 RIS P Efficiency heat recoveries and low silhouette, for automatic operation and control of the recuperator. Designed for horizontal installation in false ceilings. F7 F9 General characteristics: High efficiency exchanger (54%-75%) 2 Air filters of, F7 efficiencies made with low-loss loading bags (F9, please consult). Electronics for automatic control, integrated in 260 to 1900 models with UNI controller included. Electronic for automatic control, as an accessory (BOX-E) in models 2000 to 3000, for the control it is necessary to request the UNI or PRO panel as an accessory. Input and output temperature sensors (size 400 to 1900) Humidity sensor, size 1000 to Built-in bypass hatch in models 1000 to Bypass automatic control in models 1000 to Construction: Metallic structure Double-wall panels, with soundproofing of 30 mm. thickness in 400 and 700, and 60 mm. in the rest. Input and output vents with airtight joint Lower access doors to facilitate maintenance and cleaning. Versions: Horizontal: For false ceiling Environmental: Renewal of air without supply of heat (S) Electric: With supply of heating by electric batteries (E) On request: Adiabatic module 2 configurations of outlets according to model (see diagrams of D or K configurations) UNI Controller included from RIS-400 to RIS-1900 equipments Order code Impeller detail Filters detail RIS 400 P E D MA Technical characteristics Model Model Size Speed (r/min) Fans Voltage (V) Flat design for suspended ceiling Current (A) Power (W) S: Environmental E: Electric Max. Airflow (m 3 /h) Max. Airflow F7(m 3 /h) D: Entry of air from the exterior on the right-hand side K: Entry of air from the exterior on the left-hand side Thermal efficiency (%) Irradiated NPS db(a) Total current (A) Filter EN 779 filter F7 filter F9 filter Weight (Kg) Adiabatic module Electrical B. Voltage (V) Resistance power (kw) RIS-1000-P-S x230 2x1.36 2x /F7 113 RIS-1500-P-S x230 2x1.63 2x /F7 189 RIS-1900-P-S x230 2x2.95 2x /F7 290 RIS-2000-P-S x400 2x1.94 2x /F7 324 RIS-3000-P-S x400 2x2.58 2x /F7 393 RIS-400-P-E x230 2x0.77 2x /F7 42 1x230 2 RIS-700-P-E x230 2x0.92 2x /F7 57 1x230 3 RIS-1000-P-E x230 2x1.36 2x /F x400 6 RIS-1500-P-E x230 2x1.63 2x /F x400 9 RIS-1900-P-E x230 2x2.95 2x /F x RIS-2000-P-E x400 2x1.94 2x /F x RIS-3000-P-E x400 2x2.58 2x /F x Notes: * Thermal efficiencies calculated with a temperature differential +20 ºC inside / -20 ºC outside, 60% internal humidity, 90% external humidity. * Irradiated sound pressure level are free field at 1.5 m * Equipment with a fan or three-phase battery should be connected with three phases + neutral + earth. 16

17 HEAT RECOVERY UNITS Configurations Configuration D standard supply. Horizontal version D Diagrams according to top view (the opposite side to the inspection door). K version only available for 1900, 2000 and 3000 models. Horizontal version K Translation of literals from the graph ZONA LOCAL: LOCAL AREA ZONA CALLE: STREET AREA Extracción aire del local: Extraction of air from the premises Impulsión aire del local: Impulsion of air from the premises Entrada aire fresco y limpio: Entry of fresh, clean air Salida aire viciado: Outlet of used air Dimensions in mm Model A B C ØD H1 H2 H3 W1 W2 X Z RIS-400-P RIS-700-P RIS-1000-P Model A B C D G H1 H2 H3 W1 X Z RIS-1500-P Inside Model A B C ØD H1 H2 W1 RIS-1900-P RIS-2000-P Outside RISP-3000-P/D Inside Outside RISP-3000-P/K 17

18 Characteristic curves RIS P-400E / RIS P-700E RIS P-1000 / RIS P-1500 / RIS P-1900 RIS P-2000 / RIS P-3000 Accessories See accessories section UNI PRO BOX-E FILTERS CJFILTER ADIABATIC BOX PRESOSTATO SI-PRESIÓN INT TEJ GENERAL BEDPLATE SILENT- BLOCKS 18

19 HEAT RECOVERY UNITS RECUP F8 Configurable heat recovery, with cross-flow plates for horizontal (H) or vertical (V) installation RECUP-H Features: Exchanger with aluminium plates with efficiency between 52% and 55% Possibility of configuration between different vent positions Built-in filters, and +F8 quality. Other combinations on request. Galvanised steel box with built-in soundproofing Construction: Galvanized sheet steel structure. Input and output vents with airtight joint Exchangeable vents Large access doors to facilitate maintenance and cleaning. Versions: Horizontal (H) or Vertical (V) Environmental: Renewal of air without supply of heat (S) Electric: With supply of heating by electric batteries (EB) Water battery: With supply of heating by water batteries (WB) On request: Adiabatic module RECUP-V Order code RECUP 20 H C MA Model Size H: Horizontal configuration V: Vertical configuration A-F: Inlet/outlet positions filter (Standard C or B according +F8 filter to models) G4 filter MA: Adiabatic module EB: Electrical battery WB: Water battery Technical characteristics Model Speed (r/min) Voltage (V) Current (A) Power motor (W) Max AIrflow (m 3 /h) Thermal efficiency (%) Irradiated NPS db(a) Filter EN 779 RECUP-05-H x x G4,, +F8 33 RECUP-08-H x x G4,, +F8 45 RECUP-12-H x x G4,, +F8 67 RECUP-20-H x x G4,, +F8 86 RECUP-20-V x x G4,, +F8 86 RECUP-30-H x x G4,, +F8 112 RECUP-30-V x x G4,, +F8 112 RECUP-40-H 900 3x x G4,, +F8 167 RECUP-40-V 900 3x x G4,, +F8 167 RECUP-50-H x x G4,, +F8 182 RECUP-50-V x x G4,, +F8 182 RECUP-60-H x x G4,, +F8 205 RECUP-60-V x x G4,, +F8 205 Weight (Kg) 19

20 Configurations (Horizontal version) Configuration C standard supply. Except models 05, 08 and 12 configuration B. Configuration (A) Configuration (B) Configuration (C) Configuration (D) Configuration (E) Configuration (F) SV AF SV EL IL EL AF EL Filter Filter AF EL Filter Filter SV IL Filter Filter AF Filter Filter AF Filter Filter IL EL AF Filter Filter IL IL EL IL SV SV AF: External fresh air / IL: Impulsion of air to the premises / SV: Outlet of used air / EL: Extraction of air from the premises SV Dimensions in mm Models A B L ød H1 H2 H3 W W1 Weight (Kg) RECUP-05-H RECUP-08-H RECUP-12-H RECUP-20-H RECUP-30-H RECUP-40-H RECUP-50-H RECUP-60-H Models A B B1 L ød H1 H2 H3 W W1 W2 W3 RECUP-05-H RECUP-08-H RECUP-12-H RECUP-20-H RECUP-30-H RECUP-40-H RECUP-50-H RECUP-60-H

21 Dimensions in mm Models A A1 B B1 L ød H1 H2 H3 W W1 RECUP-20-V RECUP-30-V RECUP-40-V RECUP-50-V RECUP-60-V Models A A1 B B1 L L1 ød H1 H2 H3 H4 W W1 RECUP-20-V RECUP-30-V RECUP-40-V RECUP-50-V RECUP-60-V

22 Acoustic features The specified values are determined according to free field measurements of sound levels in db(a) at a distance not less than 1.5 m of equipment. Sound power Lw(A) spectrum in db(a) via frequency band in Hz. Model RECUP RECUP RECUP RECUP Model RECUP RECUP RECUP RECUP Characteristic curves RECUP-05 / RECUP-08 / RECUP-12 / RECUP-20 RECUP-30 / RECUP-40 / RECUP-50 / RECUP-60 Accessories See accessories section FILTERS CJFILTER ADIABATIC BOX WATER BATERY ELECTRICAL PRESOSTATO SI-PRESIÓN INT TEJ FOR RECUP BATTERY FOR RECUP VIS GENERAL BEDPLATE SILENT- BLOCKS 22

23 HEAT RECOVERY UNITS RIRS Very high efficiency heat recuperators with rotating exchanger for automatic operation and control of the recuperator, according to selected parameters of temperature and humidity (models 400 to 1500). Designed for horizontal (H) installation F7 Features: High efficiency exchanger (70%-77%) Filters for F7 high efficiency air supply Electronics for automatic control, integrated in 400 to 1500 models with UNI controller included Electronic for automatic control, as an accessory (BOX-E) in models 2000 to 4000, for the control it is necessary to request the UNI or PRO panel as an accessory Double soundproofed wall with 50 mm. of high-absorption sound insulation Fans with external rotor motor Construction: Metallic structure Double-wall panels, with soundproofing of 50mm. thickness Exchangeable inspection plate. Input and output vents with airtight joint Large access doors to facilitate maintenance and cleaning. In the horizontal version, the doors are exchangeable up to 1500 model so as to be able to carry out the maintenance on the right and the left, seen through the vents. Versions: Horizontal (H) Electric: With supply of heating by electric batteries (E) Water battery: With supply of heating by water batteries (W) UNI Controller included in RIRS 400 to RIRS 1500 models Order code RIRS 1000 H E D Model Size Horizontal ducts E: Electric W: Water battery D: Entry of fresh, clean air from the exterior on the right-hand side K: Entry of fresh, clean air from the exterior via the left-hand side Technical characteristics Model Speed (r/min) Voltage (V) Current (A) Power motor (W) Max. Airflow (m 3 /h) Thermal efficiency (%) Irradiated NPS db(a) Total current (A) Filter EN 779 Electrical B. Water B. Weight Voltage Resistance (Kg) (V) power (kw) RIRS-400E x x F7 70 1x RIRS-700E x x F7 96 1x230 2 RIRS-1500E x x F x RIRS-2000E x x F x400 9 RIRS-3000E x x F x RIRS-4000E x x F x RIRS-1500W x x F RIRS-2000W x x F RIRS-3000W x x F RIRS-4000W x x F Thermal power (KW) 23

24 Configurations Configuration D standard supply Horizontal version D F7 F7 Translation of literals from the graph ZONA LOCAL: LOCAL AREA ZONA CALLE: STREET AREA Extracción aire del local: Extraction of air from the premises Impulsión aire del local: Impulsion of air from the premises Entrada aire fresco y limpio: Entry of fresh, clean air Salida aire viciado: Outlet of used air Horizontal version K F7 F7 Dimensions in mm Model A B C Ø D H1 H2 RIRS RIRS RIRS RIRS RIRS Model A B C H1 H2 K L W RIRS

25 HEAT RECOVERY UNITS Characteristic curves RIRS 400HE / RIRS 700HE / RIRS 1500HE RIRS 1500HW RIRS 2000HE / RIRS 3000HE / RIRS 4000HE RIRS 2000HW / RIRS 3000HW / RIRS 4000HW Accessories See accessories section UNI PRO BOX-E FILTERS CJFILTER ADIABATIC BOX PRESOSTATO SI-PRESIÓN INT TEJ GENERAL BEDPLATE SILENT- BLOCKS 25

26 SV/FILTER Low noise in-line duct fans with different stages of filtration. G4 Features: Acoustic casing covered with sound absorbing material. Standard aspiration and impulsion joints to aid in duct installation. G4 +, + F8 and F7 + F9 filters according to model Easy access inspection and cleaning cover Construction: Galvanized sheet steel casing Backward-curved turbine, except models 125 and 150, which have a multi-blade impeller. Supplied with four supporting feet, to facilitate assembly. Large access doors to facilitate maintenance and cleaning. Motor: Class F motors with external rotor, ball bearings, IP54 protection, and built-in thermal protector 230V single-phase. -50/60Hz. Adjustable Max. temperature of air for transport +50ºC Finish: Anticorrosive finish in polyester resin, polymerised at 190ºC, after alkaline degreasing and phosphate-free pre-treatment. F8 F7 F9 Order code SV/FILTER 200/H F7+F9 Model Size Filter combination Technical characteristics Model Speed (r/min) Maximum admissible current (A) 230V Power installed (kw) (G4+) filters Airflow Maximum (m 3 /h) (+F8) filters (F7+F9) filters No. No. Pre-filters Filters Filter Dimensions (mm) (G4) (F) filters filters SV/FILTER-125/H x194x48 282x194x SV/FILTER-150/H x216x48 334x216x SV/FILTER-200/H x248x48 389x248x SV/FILTER-250/H x267x48 414x267x SV/FILTER-315/H x344x48 513x344x SV/FILTER-350/H x385x48 602x385x SV/FILTER-400/H x405x48 660x405x Weight (Kg) 26

27 FILTRATION UNITS Dimensions in mm Model A B C1 C2 Ø D1 L Ø D2 EC1 EC2 T SV/FILTER-125/H , SV/FILTER-150/H , SV/FILTER-200/H SV/FILTER-250/H SV/FILTER-315/H SV/FILTER-350/H SV/FILTER-400/H Characteristic curves Equipment curve according to built-in filters 1 G4+ 2 +F8 3 F7+F9 Static pressure Dynamic pressure Absorbed power SV/FILTER125/H SV/FILTER150/H Pa Pa Pd Pd 27

28 Characteristic curves Equipment curve according to built-in filters 1 G4+ 2 +F8 3 F7+F9 Static pressure Dynamic pressure Absorbed power SV/FILTER200/H SV/FILTER250/H Pa Pa Pd Pd SV/FILTER315/H SV/FILTER350/H Pa Pa Pd Pd 28

29 FILTRATION UNITS Characteristic curves Equipment curve according to built-in filters 1 G4+ 2 +F8 3 F7+F9 Static pressure Dynamic pressure Absorbed power SV/FILTER400/H Pa Pd Accessories See accessories section FILTERS CJFILTER PRESOSTATO SI-PRESIÓN PRESSURE INT VIS TEJ PROBE 29

30 UFR Soundproofed filtration units with sandwich panel, equipped with high-performance reaction turbine fans and different stages of filtration according to model. F7 F8 F9 Features: Soundproofed structure Direct operation Impulsion of air, configurable by 4 laterals + F8, F7 + F9 and G4 + filters according to model selected Possibility of pre-filter plus two stages of filtration Easy access inspection and cleaning cover Pressure inlets for filter control Pressure probe for filter control Construction: Galvanised sheet steel structure with soundproofing. High-performance impeller with backward-curved blades made from sheet steel Built-in general bed Easy access inspection and cleaning covers Motor: Class F motors, with bearings, IP55 protection. Three-phase 230/400V.-50Hz. (up to 5.5CV.) and 400/690V.-50Hz. (power over 5.5CV.) Temperature of the air to be displaced -20ºC.+60ºC. Finish: Anticorrosive galvanized sheet steel G4 Order code UFR T F7+F9 Model Size Motor poles: Three-phase Combination of filters 4 poles: 1,500 r/min 6 poles: 900r/min Technical characteristics Model Speed (r/min) Maximum admissible current (A) 230V 400V 690V Power installed (kw) Maximum Airflow (m 3 /h) (+F8) filters Maximum Airflow (m 3 /h) (F7+F9) filters Maximum Airflow (m 3 /h) (G4+) filters No. Pre-filters Number of filters Whole* Medium* Whole* Medium* UFR T ,245 3,185 3, UFR T ,705 4,620 4, UFR T ,680 7,580 7, UFR T ,325 5,250 5, UFR T ,995 11,680 11, UFR T ,200 7,100 7, UFR T ,045 14,535 14, UFR T ,175 8,990 8, UFR T ,130 9,770 9, UFR T ,500 11,165 10, * Pre-filter dimensions: Full: 585x585x48. Half: 290x585x48 * Filter dimensions: Full: 593x593x292. Half: 288x593x292 Weight (Kg) 30

31 FILTRATION UNITS Dimensions in mm Model A B C D E Ø d X Z UFR T M UFR T M UFR T M UFR T M UFR T M UFR T M UFR T M UFR T M UFR T-5, M UFR T M Characteristic curves Equipment curve according to built-in filters 1 +F8 2 F7+F9 3 G4+ Static pressure Dynamic pressure Absorbed power UFR T UFR T Pe (in wg) 1,6 Pe (Pa) 400 Pe (mmca) Pa Q (cfm) Pa (W) 500 Pe (in wg) 2,8 Pe (Pa) 700 Pe (mmca) Q (cfm) Pa Pa (W) , ,4 2, ,8 0, Pd ,6 1,2 0,8 0, Pd 0, Q (m /h) 0, Q (m /h) 0,0 0,2 0,4 0,6 0,8 1,0 3 Q (m /s) 0,0 0,2 0,4 0,6 0,8 1,0 1,2 3 Q (m /s) 31

32 Characteristic curves Equipment curve according to built-in filters 1 +F8 2 F7+F9 3 G4+ Static pressure Dynamic pressure Absorbed power UFR T UFR T Pe (in wg) 3,6 3,2 Pe (Pa) Pe (mmca) Pa Q (cfm) Pa (W) Pe (in wg) 1,6 Pe (Pa) 400 Pe (mmca) Pa Q (cfm) Pa (W) 500 2, , , , , , ,2 0, , ,4 100 Pd 3 Pd 0, Q (m /h) 0, Q (m /h) 0,0 0,5 1,0 1,5 2,0 3 Q (m /s) 0,0 0,2 0,4 0,6 0,8 1,0 1,2 1,4 3 Q (m /s) UFR T UFR T Pa Pa Pd Pd Accessories See accessories section FILTERS CJFILTER PRESOSTATO SI-PRESIÓN CONSTANT FLOW KIT PRESSURE PROBE INT VIS 32

33 FILTRATION UNITS Characteristic curves Equipment curve according to built-in filters 1 +F8 2 F7+F9 3 G4+ Static pressure Dynamic pressure Absorbed power UFR T UFR T-3 Pa Pa Pd Pd UFR T-5,5 UFR T Pa Pa Pd Pd Accessories See accessories section TEJ GENERAL BEDPLATE SILENT- BLOCKS 33

34 UFX Soundproofed filtration units equipped with double inlets and different stages of filtration according to model. F7 G4 F8 F9 Features: Soundproofed structure Belt-driven + F8, F7 + F9 and G4 + filters according to model selected Possibility of pre-filter plus two stages of filtration Easy access inspection and cleaning cover Pressure inlets for filter control Built-in pressure probe Construction: Galvanised sheet steel structure with soundproofing. Impeller with forward-facing blades made from galvanised sheet steel Stuffing-box for cable inlet Built-in general bed Easy access inspection and cleaning covers Motor: Class F motors, with bearings, IP55 protection. Three-phase 230/400V.-50Hz. (up to 5.5CV.) and 400/690V.-50Hz. (power over 5.5CV.) Temperature of the air to be displaced -20ºC.+60ºC. Finish: Anticorrosive galvanized sheet steel Order code UFX 22/22 7,5 G Model Size Power motor Filter Combination Speed (rpm) Technical characteristics Model Max. Power installed (kw) Maximum Airflow (m 3 /h) (+F8) filters Maximum Airflow (m 3 /h) (F7+F9) filters Maximum Airflow (m 3 /h) (G4+) filters No. Pre-filters Number of filters Whole* Medium* Whole* Medium* UFX-12/ ,250 5,100 4, UFX-15/ ,050 8,870 8, UFX-18/ ,735 10,370 9, UFX-20/ ,805 16,510 15, UFX-22/ ,100 20,610 19, UFX-25/ ,760 26,190 24, UFX-30/ ,060 40,310 37, * Pre-filter dimensions: Full: 585x585x48. Half: 290x585x48 * Filter dimensions: Full: 593x593x292. Half: 288x593x292 Weight (Kg) 34

35 FILTRATION UNITS Dimensions in mm Model A B C D1 D2 B1 H H1 G J UFX-12/ UFX-15/ UFX-18/ UFX-20/ UFX-22/ UFX-25/ UFX-30/ Accessories See accessories section FILTERS CJFILTER PRESOSTATO SI-PRESIÓN CONSTANT FLOW KIT PRESSURE PROBE INT VIS TEJ GENERAL BEDPLATE SILENT- BLOCKS 35

36 EXAMPLE OF SELECTION OF FILTRATION UNIT UFX Useful areas according to filters 1 +F8 2 F7+F9 3 G4+ Static pressure Dynamic pressure Sound level db(a) Initial data: Working flow with clean filters. It is advised to increase the required flow by 10%. In total, there are 4500 m 3 /h in this example. Loss of load from the installation 12 mm.w.c. in this example. Desired filter combination. F7+F9 in this example. Procedure: Translation of literals from the graph Potencia absorbida: Absorbed power Potencia Recomendada en kw (CV): Recommended Power in kw (CV) On the flow-pressure graph, trace a vertical line from the point of 4500 m3/h on the flow (1) axis, through the entire graph, to the point of least pressure of the working area of F7 + F9 (2) Trace a horizontal line to the pressure scale (3). The value on the Pe scale is the resistance of the 100% clean filters. In this case, 28 mm.w.c. Trace a line parallel to the horizontal line, adding the loss of load 12 mm.w.c.of the installation (4). Point (5) is the service point of the equipment, under operating conditions: 4500 m 3 /h at 40 mm.w.c. It is verified that the service point is within the useful area of F7+F9. If this is not so, another piece of equipment must be found. The speed of transmission is determined by the position of the service point, between two curves at a known speed. In this case, the result is 1150 rpm. As the filters get dirty, the pressure will increase and the flow will diminish following the curve of 1150 rpm. The dirty filter must be replaced by a clean one when the flow is reduced to below the acceptable level, or the pressure rises above the maximum indicated on the RITE. In the graph of absorbed power, it is possible to find the appropriate motor, tracing a curve of 1150 rpm, between the curves drawn. In the intersection with the flow line, the service point is obtained (6) The power immediately above the operating point is 1.5 C.V. 36

37 FILTRATION UNITS Characteristic curves Useful areas according to filters 1 +F8 2 F7+F9 3 G4+ Static pressure Dynamic pressure Sound level db(a) UFX-12/12 Translation of literals from the graph Potencia absorbida: Absorbed power Potencia Recomendada en kw (CV): Recommended Power in kw (CV) 37

38 Characteristic curves Useful areas according to filters 1 +F8 2 F7+F9 3 G4+ Static pressure Dynamic pressure Sound level db(a) UFX-15/15 Translation of literals from the graph Potencia absorbida: Absorbed power Potencia Recomendada en kw (CV): Recommended Power in kw (CV) 38

39 FILTRATION UNITS Characteristic curves Useful areas according to filters 1 +F8 2 F7+F9 3 G4+ Static pressure Dynamic pressure Sound level db(a) UFX-18/18 Translation of literals from the graph Potencia absorbida: Absorbed power Potencia Recomendada en kw (CV): Recommended Power in kw (CV) 39

40 Characteristic curves Useful areas according to filters 1 +F8 2 F7+F9 3 G4+ Static pressure Dynamic pressure Sound level db(a) UFX-20/20 Translation of literals from the graph Potencia absorbida: Absorbed power Potencia Recomendada en kw (CV): Recommended Power in kw (CV) 40

41 FILTRATION UNITS Characteristic curves Useful areas according to filters 1 +F8 2 F7+F9 3 G4+ Static pressure Dynamic pressure Sound level db(a) UFX-22/22 Translation of literals from the graph Potencia absorbida: Absorbed power Potencia Recomendada en kw (CV): Recommended Power in kw (CV) 41

42 Characteristic curves Useful areas according to filters 1 +F8 2 F7+F9 3 G4+ Static pressure Dynamic pressure Sound level db(a) UFX-25/25 Translation of literals from the graph Potencia absorbida: Absorbed power Potencia Recomendada en kw (CV): Recommended Power in kw (CV) 42

43 FILTRATION UNITS Characteristic curves Useful areas according to filters 1 +F8 2 F7+F9 3 G4+ Static pressure Dynamic pressure Sound level db(a) UFX-30/28 Translation of literals from the graph Potencia absorbida: Absorbed power Potencia Recomendada en kw (CV): Recommended Power in kw (CV) 43

44 UFRX Soundproofed filtration units equipped with double inlet fans and very robust reaction turbine and different stages of filtration according to model. F8 Features: Belt-driven Built-in general bed + F8, F7 + F9 and G4 + filters Possibility of pre-filter plus three stages of filtration Easy access inspection and cleaning covers Pressure inlets and pressure probe for filter control Construction: Structure with aluminium profiles Soundproofed sandwich panel Impeller with backward-curved blades made from sheet steel Built-in general bed Easy access inspection and cleaning covers Motor: Class F motors, with bearings, IP55 protection. Three-phase 230/400V.-50Hz. (up to 5.5cv) and 400/690V.-50Hz. (power over 5.5CV.) Temperature of the air to be displaced -20ºC.+60ºC. Finish: Anticorrosive sheet steel pre-lacquered F7 F9 G4 Order code UFRX 355 5,5 G Model Size Power motor Filters combination Speed (rpm) Technical characteristics Model Max. Power installed Maximum Airflow (m 3 /h) Maximum Airflow (m 3 /h) Maximum Airflow (m 3 /h) No. Pre-filters Number of filters Weight (Kg) (kw) (+F8) filters (F7+F9) filters (G4+) filters Whole* Medium* Whole* Medium* UFRX ,550 8,075 7, UFRX ,330 11,645 10, UFRX ,470 15,555 14, UFRX ,700 19,550 18, UFRX ,800 27,200 25, UFRX ,360 34,340 32, UFRX ,000 42,000 41, * Pre-filter dimensions: Full: 585x585x48. Half: 290x585x48 * Filter dimensions: Full: 593x593x292. Half: 288x593x292 44

45 FILTRATION UNITS Dimensions in mm Height Width Model A B C D1 D2 B1 H H1 G J UFRX UFRX UFRX UFRX UFRX UFRX UFRX Accessories See accessories section FILTERS CJFILTER PRESOSTATO SI-PRESIÓN CONSTANT FLOW KIT PRESSURE PROBE INT VIS TEJ GENERAL BEDPLATE SILENT- BLOCKS 45

46 EXAMPLE OF SELECTION OF FILTRATION UNIT UFRX Useful areas according to filters 1 +F8 2 F7+F9 3 G4+ Static pressure Dynamic pressure Sound power db(a) Initial data: Working flow with clean filters. It is advised to increase the required flow by 10%. In total, there are m 3 /h in this example. Loss of load from the installation 72 mm.w.c. in this example. Desired combination of filters +F8 in this example. Procedure: On the flow-pressure graph, trace a vertical line from the point of 7000 m 3 /h on the flow (1) axis, through the entire graph, to the working pressure of the installation (2). At point (2) add the loss of load from the +F8 filters, in this case 18 mm.w.c.(3), obtaining point(4). The loss of load of the 100% clean filters is considered. The resulting Point (4) is the service point of the equipment, under operating conditions: m 3 /h at 90 mm.w.c. It is verified that the service point is within the area covered by the curves. If this is not so, another piece of equipment must be found. The speed of transmission is determined by the position of the service point, between two curves at a known speed. In this case, the result is 2900 rpm. As the filters get dirty, the pressure will increase and the flow will diminish following the curve of 2900 rpm. The dirty filter must be replaced by a clean one when the flow is reduced to below the acceptable level, or the pressure rises above the maximum indicated on the RITE. In the graph of absorbed power, it is possible to find the appropriate motor, tracing a curve of 2900 rpm, between the curves drawn. In the intersection with the flow line, the service point is obtained (5). The recommended power is immediately above the operating point, 4 C.V. in the example. Translation of literals from the graph Potencia absorbida: Absorbed power Potencia Recomendada en kw (CV): Recommended Power in kw (CV) 46

47 FILTRATION UNITS Characteristic curves Useful areas according to filters 1 +F8 2 F7+F9 3 G4+ Static pressure Dynamic pressure Sound power db(a) UFRX-315 Translation of literals from the graph Potencia absorbida: Absorbed power Potencia Recomendada en kw (CV): Recommended Power in kw (CV) 47

48 Characteristic curves Useful areas according to filters 1 +F8 2 F7+F9 3 G4+ Static pressure Dynamic pressure Sound power db(a) UFRX-355 Translation of literals from the graph Potencia absorbida: Absorbed power Potencia Recomendada en kw (CV): Recommended Power in kw (CV) 48

49 FILTRATION UNITS Characteristic curves Useful areas according to filters 1 +F8 2 F7+F9 3 G4+ Static pressure Dynamic pressure Sound power db(a) UFRX-400 Translation of literals from the graph Potencia absorbida: Absorbed power Potencia Recomendada en kw (CV): Recommended Power in kw (CV) 49

50 Characteristic curves Useful areas according to filters 1 +F8 2 F7+F9 3 G4+ Static pressure Dynamic pressure Sound power db(a) UFRX-450 Translation of literals from the graph Potencia absorbida: Absorbed power Potencia Recomendada en kw (CV): Recommended Power in kw (CV) 50

51 FILTRATION UNITS Characteristic curves Useful areas according to filters 1 +F8 2 F7+F9 3 G4+ Static pressure Dynamic pressure Sound power db(a) UFRX-500 Translation of literals from the graph Potencia absorbida: Absorbed power Potencia Recomendada en kw (CV): Recommended Power in kw (CV) 51

52 Characteristic curves Useful areas according to filters 1 +F8 2 F7+F9 3 G4+ Static pressure Dynamic pressure Sound power db(a) UFRX-560 Translation of literals from the graph Potencia absorbida: Absorbed power Potencia Recomendada en kw (CV): Recommended Power in kw (CV) 52

53 FILTRATION UNITS Characteristic curves Useful areas according to filters 1 +F8 2 F7+F9 3 G4+ Static pressure Dynamic pressure Sound power db(a) UFRX-630 Translation of literals from the graph Potencia absorbida: Absorbed power Potencia Recomendada en kw (CV): Recommended Power in kw (CV) 53

54 UNI REMOTE CONTROL PANEL External control designed for automatic operation of the energy recoverer, according to the variables entered. Applicable to models: RIS / RIRS Features: Adjustment and display of the entry temperature of air to the premises Adjustment and display of fan speed. Display of alarm signals RS-485 communications cable for remote control, length 13m PRO REMOTE CONTROL PANEL External control designed for automatic operation of the energy recoverer, according to the variables entered. Applicable to models: RIS / RIRS Features: Adjustment and display of the entry temperature of air to the premises Adjustment and display of fan speed. Control of the temperature of air entry, external temperature, temperature of the premises and temperature of the extracted air Display of alarm signals Timer with weekly programme (time of start-up, temperature of the premises, etc.) RS-485 communications cable for remote control, length 13m BOX-E Electronic for automatic control External box, with the necessary electronics for the automatic control of the heat recuperators series RIS, RIS-P and RIRS. Applicable to the models which do not have it included as standard. FILTERS Air filters, for replacement in the filtration units and heat recuperators. CJFILTER CJFILTER 100 Air filter boxes for circular ducts equipped with different types of filter, according to model. Envelope in galvanised sheet metal. Standard circular clamps in aspiration and impulsion, with airtight joints, to help in duct installation. Easy opening inspection and filter-change cover G-4, F-5, F-6, F7, F8 and F-9 filters, according to model ADIABATIC BOX diameter Box which incorporates an adiabatic module It contributes to the cooling of the air supply to the premises It is installed in the extraction circuit between the pre-filter and the exchanger. Filters G4 F5 F7 F8 F9 SI-PRESOSTATO Pressure sensor Controls the pressure difference between filters, once it reaches the selected value it triggers a contact to activate an alarm relay. SI-PRESIÓN Pressure transmitter Controls the pressure in installations with constant pressure ventilation, and transforms it into an electrical signal to regulate the ventilation system and constantly maintain the same pressure. Model Power Outlet Max. consumption (VA) Connectors Pressure range SI-PRESIÓN TPDA V ac/24v dc 0-10V/4-20mA mm Pa SI-PRESIÓN TPDA-3202 c/display 24V ac/24v dc 0-10V/4-20mA mm Pa 54

55 ACCESSORIES CONSTANT FLOW KIT A set made up of a pressure transmitter and frequency converter, designed to increase the speed of the fan as the filter gets dirtier, and to maintain a constant flow in the installation. DIFFERENTIAL PRESSURE DRILL Controls the difference in pressure between filters, to detect when the filters are dirty and need to be replaced. WATER BATERY FOR RECUP Model WB-200 WB-250 WB-315 WB-500 Applies to models RECUP-05 RECUP-08 RECUP-12 / RECUP-20 / RECUP-30 RECUP-40 / RECUP-50 / RECUP-60 ELECTRICAL BATTERY FOR RECUP Model Applies to models Power (kw) EB RECUP EB RECUP EB RECUP EB RECUP EB RECUP EB RECUP EB RECUP-50 / RECUP INT Stop-start safety switches in accordance with Standard UNE-EN Features: Switches to install beside fan, so that mains current can be cut without handling the fan IP65 protection For three-phase or two-speed fans, use 6-pole switch Single-phase fans, use switch of 3 poles VIS Model Current (A) (kw) Cable input (mm) INT-CA 10/3CA INT-KG 10/3CA INT-KG 20/3CA INT-KG 32/3CA INT-KG 41/3CA INT-KG 64/3CA INT-KG 80/3CA INT-KG 100/3CA INT-CA 10/6CA INT-KG 10/6CA INT-KG 20/6CA INT-KG 32/6CA INT-KG 41/6CA INT-KG 64/6CA INT-KG 80/6CA INT-KG 100/6CA Outlet hoods and inlet with protective grille. Prevents objects and water from entering the interior of the filtration units. TEJ BG Outside covers. Avoids water entering filtration units installed outside. Base stand Base for the support of the filtration units on the ground. SB Vibration dampers Spring dampers to prevent the transmission of vibrations 55

56 OUR PRODUCTS In-line duct fans Ventilation systems for houses NEW Heat recovery units NEW Axial fans Roof fans Filtration units NEW Centrifugal fans Efficient Energy Applications Air curtains NEW ATEX Fans for explosive atmospheres Fans for smoke extraction 400ºC/2h - 300ºC/1h Ask us for information Ventilation software. General Catalogue

57 PERPIGNA FRANCE PUIGCERDÀ RIPOLL FIGUERES Crta. de Berga, km 0.7 E SANT QUIRZE DE BESORA Barcelona - SPAIN Tel Fax comercial@sodeca.com Export sales: ventilation@sodeca.com Dir. LLEIDA ZARAGOZA MADRID SANT QUIRZE DE BESORA MANRESA REUS VIC MOLLET BARCELONA GIRONA Dir. TARRAGONA Export sales SODECA EXPORT Crta. de Berga, km 0.7 E SANT QUIRZE DE BESORA Barcelona - SPAIN Tel Fax ventilation@sodeca.com SODECA SOUTH AMERICA Sodeca Ventiladores Ltda Avda. Puerta Sur San Bernardo, SANTIAGO, CHILE ventilation@sodeca.com PORTUGAL Mr. Albert Bartés E SANT QUIRZE DE BESORA Barcelona - SPAIN Tel Fax comercial@sodeca.com SODECA CARIBBEAN AREA Mr. Carlos A. Hernández Gil Residencial Miramar Nº 120B-7ma Ave. NO entre 18 y 20. Miramar Playa, CIUDAD DE LA HABANA, CUBA Tel sodeca@enet.cu

58 Ctra. de Berga, km 0,7 E SANT QUIRZE DE BESORA (Barcelona - Spain) Tel Fax comercial@sodeca.com Export sales: ventilation@sodeca.com