Product Name: Kleenmold 197 Product code: Page 1 of 6

Transcription

1 Page 1 of 6 1. Description of substance/preparation and company Substance/preparation: Description/trade name: KLEENMOLD 197 (Swabbing Compound) Product code: Producer/supplier: Name: TOTAL Lubricants USA, Inc. Address: 5 North Stiles Street, USA Telephone No.: (908) FAX No.: (908) Contact: Mr. Chris Fensham Emergency No.: (908) Composition/components Chemical characterization: Petroleum Based Lubricant Dangerous components: None. Components with recognized workplace exposure limitations: Petroleum based lubricating oil (CAS No , EINECS No ) (80-90%) Graphite (CAS No , EINECS No ) Sulfur (CAS No , EINECS No ) Non-Hazardous Components: Proprietary. Additional comments: None. 3. Possible dangers Description of dangers: Not classified as a dangerous preparation. Special comments for human being and environment: - Product contacting the eye may cause mild irritation. - Prolonged or repeated contact with skin may lead to drying of the skin, possibly leading to irritation and dermatitis. 4. First-Aid General: Remove contaminated clothing and shoes. Inhalation: Remove person to fresh air. If effects persist, obtain medical advice. Skin contact: Wash with soap and water.

2 Page 2 of 6 Eye contact: Flush eyes with plenty of water for at least 15 minutes or until irritation subsides. If irritation persists, call a physician. Ingestion: Do not induce vomiting. Get medical attention. Comments for physician: None. 5. Measures of fire fighting Appropriate extinguishing means: Foam, Water Spray (Fog), Dry Chemical, CO 2. Unsuitable means: Not applicable. Conditions to avoid: Keep containers away from ignition sources, such as heat, sparks, and open flames. Empty containers retain product residue and can be dangerous. Do not weld, solder, drill, grind or expose empty containers to heat, flame or other sources of ignition. Special protection equipment: Use supplied air breathing equipment for enclosed or confined spaces. Additional information: Use water to keep fire-exposed containers cool. Water may cause frothing. 6. Measures on unintentional release Personnel measures: - Avoid contact with skin and eyes, do not breathe in vapors/aerosols/products of decomposition. Environmental measures: - Keep product out of ground water, watercourses or sewage plants. - Advise authorities, if the product contacts ground water, watercourses or contaminates the ground. Procedure for clean-up/removal: - Apply appropriate absorbent substance (e.g. Sand or sawdust); dispose of contaminated absorbent substance appropriately; wash affected surfaces thoroughly. Additional comments: None. 7. Handling and storage Safe handling procedure: - As a general rule, careful handling practice should be observed. - Ensure adequate ventilation in the event of vapor/aerosols/decomposition products forming. Fire/explosion protection: (See Section 5) Storage:

3 Page 3 of 6 - Store in durable containers at a cool temperature, away from heat and extreme cold, as well as materials presenting fire hazard; keep containers tightly sealed when not in use. Information relating to mixed storage: None. Additional information: None. 8. Exposure limitation and individual protective equipment Constituents with recognized workplace exposure limitations: Name CAS No. Limit* Petroleum based lubricating oil mg/m3 (ACGIH/OSHA TWA) Sulfur mg/m3 (ACGIH/OSHA TWA) (as a nuisance dust) Graphite mg/m3 (ACGIH TWA) *Note: ACGIH = American Conference of Governmental Industrial Hygienists (USA) OSHA = Occupational Safety and Health Administration (USA) TWA = 8 hour time weighted average Individual protective equipment: Respiratory protection: Ensure proper ventilation. Avoid breathing vapor, mist or fumes of decomposition products. Use approved respiratory protection when recognized exposure limitations are exceeded. Hand protection: Chemical resistant gloves, if necessary. Eye protection: Full-vision goggles or face mask if eye contact may occur. Body protection: Chemical resistant apron or other impervious protective clothing, if needed. Protective and hygiene measures: - Avoid contact with skin and eyes; avoid excessive inhalation of vapor/aerosols/decomposition products. - Remove soiled shoes and clothing. - Wash skin thoroughly with soap and water after contact with skin, before breaks and before leaving work. - Apply protective skin cream as a precautionary measure, if necessary. 9. Physical and chemical characteristics Appearance: Notes:

4 Page 4 of 6 Form: Viscous Liquid. Color: Grey/Black. Odor: Petroleum Safety data: ph-value (at delivery): (20 C) ~7 (approximate) ph-value (g/l water): (20 C) - - Melting point/range: n/e - Boiling point/range: Initial, approximate n/e - Flash point (minimum): 160 C Ignition temperature: n/e - Combustibility: n/e - Spontaneous combustibility: n/e - Fire hazard (oxidizing) characteristics: n/e - Explosion limits (upper/lower limits): n/e - Density: (20 C) <1 g/cm 3 Solubility in water: (20 C) negligible Solubility in solvent: (20 C) n/e g/l Solubility in grease: (20 C) n/e g/l Distribution coefficient: (20 C) n/e - Viscosity: (20 C) n/e mpas Solvent content: 0 wt.% Other data: None. 10. Stability and reactivity Situations to avoid: - Keep containers away from heat and fire-hazardous materials. - This product is stable and will not react violently with water. Hazardous polymerization will not occur. Avoid contact with strong oxidants such as liquid chlorine. Decomposition products: - Precise decomposition product analysis is unknown. Proper ventilation will reduce the smoke and fumes that could possible include carbon monoxide, oxides of sulfur, and various polyaromatic hydrocarbons which may result from the incomplete combustion of all petroleum hydrocarbon products. Further details: - Ensure proper ventilation. 11. Toxicological data Toxicological Data: - Acute toxicity: n/d - Specific symptoms in animal tests: n/d - Irritating/corrosive action: n/a

5 Page 5 of 6 - Sensitization: n/a - Carcinogenic effects: n/a The petroleum oil used in this product meets the E.U. requirement of less than 3% (wt.) DMSO extract for total polycyclic aromatic compounds (PAC) using IP Genetic effects: n/a - Effects on reproductive ability: n/a - Other data: none. General remarks: None. 12. Environmental data Data regarding elimination (persistence and degradability): Procedure/analytical method, degree of elimination: Poor bio-degradability. Evaluation test: none Other comments: none Behavior in environmental compartments: Mobility: n/d Bio-accumulation potential: n/d Other comments: none Eco-toxicological data: Aquatic toxicity: acute toxicity on fish (96 hr.) is >30,000 mg/l (for the petroleum oil) Behavior in water-purification plants: n/d Respiratory inhibition of municipal sewage sludge: n/d Other comments: none Other environmental data: COD value: n/d mg O 2 /g BOD value: n/d mg O 2 /g AOX reference: n/d Substances covered by EC law: n/d General comments: None. 13. Notes on disposal Product: Remove for disposal. Recommendation: None. Waste code no./designation: n/d Recommended cleaning substances: n/d 14. Transportation data

6 Page 6 of 6 Land Transport (ADR): Air Transport (IATA/ICAO): Sea Transport (IMDG): Not regulated as a dangerous good Not regulated as a dangerous good Not regulated as a dangerous good 15. Regulations Dangerous Goods Information: Not regulated as a dangerous good. Labels: Not Required Markings: None. Contains: n/a R-sentence: R-66 S-sentence: S-24/25 Other regulations: n/a 16. Additional comments Further information: none Training: n/a Recommended uses: See technical bulletin. Recommended restrictions: n/a Further information: n/a Sources of data: n/a Abbreviations: n/e = not established n/a = not applicable n/d = not determined Department which elaborated this data sheet: Steve Smith, Regulatory Manager, TOTAL Lubricants USA, Inc., for the. Contact: See Section 1. The data in this safety data sheet reflect the current state of knowledge of the issuing party and are not a contractual guarantee of the quality features of the product. Since the supplier has no influence on the conditions of use nor on any possible misuse by the end user, it undertakes no guarantee in this respect. Consequently, the recipient of the product bears responsibility itself for complying with all current and future legal and other regulations. The recipient must ensure that all the data and information required for the conditions of the particular application are available.