Release: 2. AUR20705 Certificate II in Automotive Mechanical Tyre Fitting (Light)
|
|
- Katherine Brooks
- 6 years ago
- Views:
Transcription
1 Release: AUR0705 Certificate II in Automotive Mechanical Tyre Fitting (Light)
2 AUR07 05 Certificate II in Automotive Mechanical - Tyre Fitting (Light) Description This qualification covers the skills and knowledge required to perform a range of tasks related to tyre fitting of Light and heavy within an automotive service and repair business. It is suitable for entry into the automotive retail, service and repair industry. Job roles/employment outcomes The Certificate II in Automotive Mechanical tire fitting ( light or/and Heavy) is intended to prepare new employees or recognize and develop existing workers who are performing servicing and repair of particular components/systems of vehicles in an automotive service or repair business. Employment outcomes targeted by this qualification include: Tyre fitting ( Light ) Application This qualification is suitable for an Australian Apprenticeship pathway.
3 Pathways Information Pathways into the qualification This qualification may be accessed by direct entry. Credit will be granted towards this qualification to those who have completed Units of Tyre fitting RII 009 Certificate II in Surface extraction operations Specializations for this qualification included Steering and suspension Tire fitting heavy Wheel alignment Advice is provided at the end of this qualification on the recommended units of competency for each specialization. Where elective units of competency are packaged to suit a particular industry sector or occupational outcome, Registered Training Organizations (RTOs) might issue, for example, a: Certificate II in Automotive Mechanical Tyre Fitting( light) (specializing in steering and suspension or/and Wheel Alignment) OR Certificate II in Automotive Mechanical Tire Fitting Specializing In (Steering and Suspension or/and Wheel Alignment) It should be noted that a qualification with a specialization does not change the title of the qualification, although RTOs may choose to record the specialization below the title. Licensing/Regulatory Information Licensing considerations Some jurisdictions require this qualification for licensing purposes. In addition some units in this qualification may have licensing or regulatory requirements, depending on the work context. Local regulations should be checked for details. Entry Requirements Not Applicable Packaging Rules
4 Packaging Rules To be awarded the Certificate II in Automotive Mechanical - Tyre Fitting (Light) competency must be achieved in thirteen (13) units of competency. Note: Where prerequisite units are identified they must be counted in the total number of units required for completion of the qualification. Total of 13 units from level or 3 are required Level Units Unit Title Maximum of units of competence at level 3 1. Compulsory Units of Competence AURC7003A Apply environmental regulations and best practice in a workplace or business Plus minimum of 1 of the following units of competence: AURT 7181A Implement and Monitor Environmental Regulations in the Automotive Mechanical Industry ( applicable to Mechanical repairers AURC7003A Apply Environmental Regulations and Best practice in a workplace or Business. Elective units of competency
5 Select 8 units from the following group 4 units are compulsory Compulsory Units list *AURT17606A Balance wheels and tyres *AURT17665A Remove, Fit and Inspect Wheel Assemblies *AURT17668A Select Tyres and Rims for specific Applications ( Light ) *AURT17766A Remove, Inspect, Repair and Fit Tyres and Tubes (Light) AURC70789A AURT15170A AURT16170A AURT17108A AURT315166A AURT316166A AURT7078A Communicate Effectively in the Workplace Inspect and Service Steering Systems Inspect and Service Suspension Systems Carry out Wheel Alignment Operations Repair steering systems Repair Suspension Systems Use and Maintain Workplace Tools and Equipment. Units of Competence Select 3 units from the following group AURA 54180A Operate Information Technology Systems AURC 537A Identify, Clarify and Resolve Problems AURC 7041A Establish Relationship with Customers AURE 18676A Test, Service and Charge Batteries AURE4008A Carry out Soldering of electrical Wiring/Circuits AURS461A Promote Products and Services AURS590A Process Customer Complaints AURT5667A Use and Maintain Measuring Equipment
UEENEEP026A Conduct in-service safety testing of electrical cord connected equipment and cord assemblies
UEENEEP026A Conduct in-service safety testing of electrical cord connected equipment and cord assemblies Release: 1 UEENEEP026A Conduct in-service safety testing of electrical cord connected equipment
More informationINDUCTION BOOKLET CERTIFICATE II COURSES
Trade Training Centre VET INDUCTION BOOKLET CERTIFICATE II COURSES ENGINEERING- Pathways (MEM20413) Electro-technology Career Start (UEE22011) Automotive Vocational Preparation (AUR20716) G:\A-OFFICE\VET\Student
More informationLevel 2 Certificate/ Diploma in Vehicle Fitting Principles ( ) August 2017 Version 3.3
QUALIFICATION HANDBOOK Level 2 Certificate/ Diploma in Vehicle Fitting Principles (4290-52) August 2017 Version 3.3 Qualification at a glance Subject area City & Guilds number 4290 Age group approved 16+
More informationUEENEEE101A Apply Occupational Health and Safety regulations, codes and practices in the workplace
UEENEEE101A Apply Occupational Health and Safety regulations, codes and practices in the workplace Release: 1 UEENEEE101A Apply Occupational Health and Safety regulations, codes and practices in the workplace
More informationPearson BTEC Level 3 Subsidiary Diploma, Diploma and Extended Diploma in Vehicle Technology Specification
Pearson BTEC Level 3 Subsidiary Diploma, Diploma and Extended Diploma in Vehicle Technology Specification For first teaching January 2012 Issue 4 Edexcel, BTEC and LCCI qualifications Edexcel, BTEC and
More informationAUTOMOTIVE SERVICE TECHNICIAN I (BASIC)
= Classroom = Laboratory/Shop/Community Classroom CBEDS TITLE: AUTOMOTE MECHANICS, COMBINATION CBEDS NO: 5655 HOURS: Total 180 Classroom 80 Laboratory/Pre-clinical 100 /CVE 0 DATE: October 9, 2008 JOB
More informationChapter 130. Texas Essential Knowledge and Skills for Career and Technical Education. Subchapter P. Transportation, Distribution, and Logistics
Transportation, Distribution, and Logistics 130.P. Chapter 130. Texas Essential Knowledge and Skills for Career and Technical Education Subchapter P. Transportation, Distribution, and Logistics Statutory
More informationBSB41415 Certificate IV in Work Health and Safety. Course Overview
BSB41415 Certificate IV in Work Health and Safety Course Overview Table of Contents Table of Contents... 1 1. Welcome... 2 1.1 The Victorian Chamber Team... 2 2. BSB41415 Certificate IV in Work Health
More informationNQF registration level. 2 Credit value of qualification 120 ETQA accredited for qualification
NATIONAL CERTIFICATE: WHOLESALE & RETAIL OPERATIONS LEARNERSHIP NUMBER: 7Q270013551202 Occupation name Warehouse Assistant Occupation number 741101 Learnership title National Certificate: Wholesale and
More informationVehicle Fitting Units (VF01-V58 to VF12-V69)
Vehicle Fitting Units (VF01-V58 to VF12-V69) INDEX Version (VF01-V58) Inspect, Repair and Replace Standard Light Vehicle Tyres 1.2 (VF02-V59) Inspect Repair and Replace High Performance Light Vehicle Tyres
More informationNATIONAL CERTIFICATE: WHOLESALE & RETAIL MERCHANDISING OPERATIONS LEARNERSHIP NUMBER: 27Q
NATIONAL CERTIFICATE: WHOLESALE & RETAIL MERCHANDISING OPERATIONS LEARNERSHIP NUMBER: 27Q270011551202 Occupation name Merchandiser Occupation number 639102 Learnership title National Certificate: Wholesale
More informationAVCC POLICY GUIDELINES CROSS-SECTOR QUALIFICATION LINKAGES
AVCC POLICY GUIDELINES ON CROSS-SECTOR QUALIFICATION LINKAGES Section 1 Preamble The Australian Vice-Chancellors Committee (AVCC) supports the development of closer connections between Vocational Education
More informationTRANSPORT TRAILER TECHNICIAN
To qualify to challenge certification in this trade or be granted authority to supervise and sign-off on apprentices in this trade, individuals must have: worked a minimum of 4,500 hours performing the
More informationCITY OF REDLANDS SENIOR MECHANIC
CITY OF REDLANDS SENIOR MECHANIC DEFINITION Under direction, to lead and perform highly skilled mechanical work related to City vehicles and equipment including fire, solid waste, and street maintenance
More informationDelivering Opportunity
Delivering Opportunity How Electric Buses and Trucks Can Create Jobs and Improve Public Health in California www.ucsusa.org/electrictrucks www.greenlining.org/issues/2016/delivering-opportunityelectric-trucks
More informationQUALIFICATION HANDBOOK
QUALIFICATION HANDBOOK Level 6 NVQ Diploma in Construction Site Management (Construction) (6578) November 2013 Version 1.0 Qualification at a glance Subject area City & Guilds number 6578 Age group approved
More informationAutomotive Industry Business Case 2016
Industry Business Case 2016 The 2016 Industry Business Case validates the priorities and directions identified in the Industry Reference Committee (IRC) Work Plans and specified in the Australian Industry
More informationSHORT COURSES. Industry Training New Zealand
SHORT COURSES Industry Training New Zealand 2 CONTENTS About Tai Poutini Polytechnic About Training for Industry Short Courses Cranes Truck Mounted Crane Pendant Crane Lifting Loads Telehandler Scaffolding
More informationTitle: EAL Suite of Qualifications for Proficiency in Food Manufacturing Excellence (QCF) At a glance
Title: EAL Suite of Qualifications for Proficiency in Food Manufacturing Excellence (QCF) At a glance Qualification codes: Levels: Credit values: Guided learning hours: Minimum learner age: Registration
More informationFNS30115 CERTIFICATE III IN FINANCIAL SERVICES
FNS30115 CERTIFICATE III IN FINANCIAL SERVICES This qualification is designed to reflect the job role of entry level employees working across the entire financial services industry that performs duties
More informationNational Certificate in Energy and Chemical Plant (Boiler Operation) (Level 2)
NZQF NQ Ref 1342 Version 2 Page 1 of 5 National Certificate in Energy and Chemical Plant (Boiler Operation) (Level 2) Level 2 Credits 42 This qualification has been reviewed. The last date to meet the
More informationForsythes Training. RPL Policies and Procedures
RPL Policies and Procedures This policy and procedure has been written in alignment with the NSW Recognition Framework and Standards 1.8 and 1.12 P a g e 1 1. Pre-Enrolment Potential participants (all
More informationBSB41415 Certificate IV in Work Health and Safety. Course Overview
BSB41415 Certificate IV in Work Health and Safety Course Overview Table of Contents Table of Contents... rror! Bookmark not defined. 1. Welcome... 2 1.1 The Victorian Chamber Team... 2 2. BSB41415 Certificate
More informationTourism Curriculum Framework (TVET)
Tourism Curriculum Framework (TVET) Last updated August 2004 Tourism Curriculum Framework Tourism (120 Indicative Hours) Leading to Statement of Attainment Tourism (240 Indicative Hours) Leading to completion
More informationLevel 4 Diploma in Hospitality Management ( ) October 2017 Version 1.3
QUALIFICATION HANDBOOK Level 4 Diploma in Hospitality Management (7148-41) October 2017 Version 1.3 Qualification at a glance Subject area Hospitality Management City & Guilds number 7148-41 Age group
More informationBSB51415 Diploma of Project Management. Release Number 1. Online Flexible Delivery
BSB51415 Diploma of Project Management Release Number 1 Online Flexible Delivery Course Guide Course BSB51415 Diploma of Project Management Release Number & Currency 1 Current. Course Description This
More informationQualification Specification. Customer Service (England) Intermediate Level Apprenticeship in Customer Service
Qualification Specification Customer Service (England) Intermediate Level Apprenticeship in Customer Service Advanced Level Apprenticeship in Customer Service Version 3.0 (October 2017) Qualification Specification:
More informationDepartment of Education and Training. Skilling Qlders for Work Round GenR8 Expanded Program SATs/VETiS Update
Department of Education and Training Skilling Qlders for Work Round 1 2016 GenR8 Expanded Program SATs/VETiS Update Skilling Queenslanders for Work Round 1 Successful Programs SQW SQW in 2015 Creation
More informationProcess for determining RPL or CT
Process for determining RPL or CT 1.0 Purpose The purpose of this document is to describe the systematic process used to recognise prior learning (RPL) and award credit transfer (CT) based on qualifications
More informationNational Certificate in Forestry (Generic Skills - Workplace Safety and Operations) (Level 2) Level 2
NZQF NQ Ref 1409 Version 4 Page 1 of 10 National Certificate in Forestry (Generic Skills - Workplace Safety and Operations) (Level 2) Level 2 Credits 44 This qualification has been reviewed. The last date
More informationRecognition of Prior Learning application. CPC32413 Certificate III in Plumbing
Recognition of Prior Learning application CPC32413 Certificate III in Plumbing Section 1 Student details First and middle name/s: Street number: Suburb: Date commenced: Surname: Street Name: State and
More informationBSB50207 Diploma of Business
BSB50207 Diploma of Business Training and Strategy Training package Units of competency to be delivered and assessed BSB07 Business Services Training Package, version 3 Unit code and title Core/ Elective
More informationJob Description. Compliance Officer Gas and Electrical Grade: Grade 9. Responsible for: None. The Job. Is to:
Job Description Job Title: Compliance Officer Gas and Electrical Grade: Grade 9 Section: Asset Management Reports to: Compliance Manager Responsible for: None The Job Is to: under the direction of the
More informationOperate a root crop harvester
Page 1 of 5 Operate a root crop harvester Level 4 Credits 20 Purpose People credited with this unit standard are able to: select and prepare root crop harvesting equipment and machinery; carry out field
More informationNew Small Business Tailored to Family Business
BSB42615 Certificate IV in New Small Business Tailored to Family Business Start today 1300 738 955 5 star education experience Best Practice Business Planning Tools Nationally accredited courses Qualified
More informationFNS40615 & FNS40215 Dual Certificates IV in Accounting & Bookkeeping
FNS40615 & FNS40215 Dual Certificates IV in Accounting & Bookkeeping Start today 1300 738 955 5 star education experience Nationally accredited courses Qualified trainers with extensive accounting & bookkeeping
More informationBSBLDR502 Lead and manage effective workplace relationships. BSB: Business Services Training Package. Trainer and Assessor Guide
BSBLDR502 Lead and manage effective workplace relationships BSB: Business Services Training Package Trainer and Assessor Guide Written by Sandy Welton www.trainingresourcesrto.com.au Purpose of this Trainer
More informationBSB30415 CERTIFICATE III IN BUSINESS ADMINISTRATION
BSB30415 CERTIFICATE III IN BUSINESS ADMINISTRATION This qualification reflects the role of individuals who apply a broad range of administrative competencies in varied work contexts, using some discretion
More informationRecycling Qualifications
Level 1 Diploma in Recycling Activities About this qualification This qualification supports learners to develop the basic skills and knowledge required for employment and career progression within the
More informationCERTIFICATE III in INVESTIGATIVE SERVICES
Australian Institute of Private Detectives P O Box 276 Frenchs Forest NSW 2086 Website: www.aipd.com.au Phone: (61 2) 9975 6430 Facsimile: (61 2) 9975 2147 Email: exec@aipd.com.au CERTIFICATE III in INVESTIGATIVE
More informationAll About Automotive - England Issue 18 August 2017
All About Automotive - England Issue 18 August 2017 A newsletter from City & Guilds on professional and technical education updates in automotive. In this issue: New procurement process for Apprenticeship
More informationRecycling Qualifications
Level 2 Diploma for Sustainable Recycling Activities About this qualification This qualification provides the skills required by operatives to work in accordance with recycling industry requirements for
More informationConstruction Curriculum Framework. Stage 6 Syllabus Part A
Construction Curriculum Framework Stage 6 Syllabus Part A for implementation from 2000 Construction (120 Indicative Hours) Potential for partial completion of: AQF Certificate I in Construction BCC10198
More informationMetal and Engineering Curriculum Framework
Metal and Engineering Curriculum Framework Stage 6 Syllabus Part A for implementation from 2000 Metal and Engineering (120 Indicative Hours) Potential for partial completion of AQF Certificate I in Engineering
More informationthrough Certificate IV in Career Development (CHC42108)
through Certificate IV in Career Development (CHC42108) COURSES TO BE RUN AT DIFFERENT VENUES COMMENCING AS PER DATES BELOW Brisbane 6 May - 17 June six breakfast workshops 7.15am - 10.15am 6/5, 20/5,
More informationLevel 2 Award in Employee Rights and Responsibilities in the Logistic Industry (QCF)
Skillsfirst Awards Handbook Level 2 Award in Employee Rights and Responsibilities in the Logistic Industry (QCF) ERL02 Suite 215 Fort Dunlop Fort Parkway Birmingham B24 9FD www.skillsfirst.co.uk Contents
More informationLevel 6 NVQ Diploma in Construction Site Management (Construction)
Level 6 NVQ Diploma in Construction Site Management (Construction) Qualification Specification ProQual 2014 Contents Page Introduction 3 The Qualifications and Credit Framework (QCF) 3 Qualification profile
More informationHume Community Housing Association CUSTOMER SERVICE OFFICER
Position Title: Reports To: Customer Service Officer Customer Services Manager Department: Neighbourhood and Customer Services Direct Reports: None Location: Fairfield/Parramatta Position Purpose: The
More informationAdvanced Diploma of Engineering. (Mechanical)
NEW SOUTH WALES TECHNICAL AND FURTHER EDUCATION COMMISSION NSW Course Number: 9163 NSW Version Number: 3 MEM05 Metal and Engineering Qualification Code: MEM60105 Advanced Diploma of Engineering (Mechanical)
More informationSOUTH AFRICAN QUALIFICATIONS AUTHORITY REGISTERED QUALIFICATION: Occupational Certificate: Retail Supervisor
All qualifications and part qualifications registered on the National Qualifications Framework are public property. Thus the only payment that can be made for them is for service and reproduction. It is
More informationEdexcel Level 3 Diploma for Waste Supervisor (QCF)
Edexcel Level 3 Diploma for Waste Supervisor (QCF) Specification Edexcel competence-based qualifications First teaching from July 2011 Issue 2 Pearson Education Ltd is one of the UK s largest awarding
More informationVehicle Sales - non statutory (Wales)
Vehicle Sales - non statutory (Wales) Latest framework version? Please use this link to see if this is the latest issued version of this framework: afo.sscalliance.org/frameworkslibrary/index.cfm?id=fr01093
More informationThis qualification has been reviewed. The last date to meet the requirements is 31 December 2018.
NZQF NQ Ref 1344 Version 2 Page 1 of 20 National Certificate in Energy and Chemical Plant (Process Operation) with optional strands in Steam Generation; Turbine Operations; Waste Treatment; Refrigeration;
More informationHeavy Equipment Suspension, Steering and Brake Systems
Heavy Equipment Suspension, Steering and Brake Systems Course Design 2006-2007 Course Information Organization Eastern Arizona College Division Industrial Technology Education Course Number AUT 135 Title
More informationIMPROVE YOUR KNOWLEDGE & SKILLS WITH A RANGE OF INDUSTRY TRAINING TRAINING
IMPROVE YOUR KNOWLEDGE & SKILLS WITH A RANGE OF INDUSTRY TRAINING TRAINING IRRIGATION AUSTRALIA Irrigation Australia is the peak national organisation representing the entire irrigation industry. We provide
More informationAPPRENTICE IDENTIFICATION
1 LOGBOOK SIGNOFF An individual holding one of the following credentials qualifies as a Workplace Assessor and may sign off on the Workplace Competencies in this Logbook: Registered Industrial Electrician
More informationThis qualification is expiring. The last date to meet the requirements is 31 December 2010.
NQF Ref 0141 Version 5 Page 1 of 8 National Certificate in Energy and Chemical Plant (Process Operation) (Level 4) with optional strands in Refrigeration, Steam Generation, Ancillary Operations, Geothermal,
More informationNGINEERING ECHNOLOGY ENGINEERING TECHNOLOGIES. Level 3 Certificate in. Qualification Specification
NGINEERING ECHNOLOGY Level 3 Certificate in ENGINEERING TECHNOLOGIES Qualification Specification Overview This qualification has been developed to provide learners with underpinning knowledge and related
More informationAutomotive Skills Development Council
Automotive Skills Development Council QUALIFICATIONS PACK - OCCUPATIONAL STANDARDS FOR AUTOMOTIVE INDUSTRY Contents What are Occupational Standards (OS)? OS describe what individuals need to do, know and
More informationLevel 4 Diploma in. Management
Level 4 Diploma in Management 01952 642314 Level 4 Diploma in Management The ILM Level 4 NVQ Diploma in Management is idealfor managers moving into a middle management position, who still retain responsibility
More informationAPPRENTICE IDENTIFICATION
APPRENTICE IDENTIFICATION Trade: Industrial Electrician Name: Individual Identification Number Contract Number Email: This is your Logbook! It is a record of your progress towards achieving certification
More informationQUALIFICATION SPECIFICATION Part A: ASSESSOR AND QUALITY ASSURER GUIDANCE FOR TECH LEVEL VEHICLE MAINTENANCE QUALIFICATIONS (NQF)
QUALIFICATION SPECIFICATION Part A: ASSESSOR AND QUALITY ASSURER GUIDANCE FOR TECH LEVEL VEHICLE MAINTENANCE QUALIFICATIONS (NQF) IMI LEVEL 3 DIPLOMA IN LIGHT VEHICLE MAINTENANCE 601/7324/5 IMI LEVEL 3
More informationTexas Commission on Environmental Quality Page 1 Chapter 30 - Occupational Licenses and Registrations
Texas Commission on Environmental Quality Page 1 SUBCHAPTER J: WASTEWATER OPERATORS AND OPERATIONS COMPANIES ''30.331, 30.337, 30.340, 30.342, 30.346, 30.348, 30.350, 30.355 Effective September 27, 2007
More informationDelivering ILM qualifications to Operations/Departmental Manager Trailblazer Apprenticeship Standards
Delivering ILM qualifications to Operations/Departmental Manager Trailblazer Apprenticeship Standards Mapping the Level 5 ILM Diploma in Principles of Leadership and to the Operations/Departmental Manager
More informationREFERENCE ID: AGR / Q
QUALIFICATIONS PACK - OCCUPATIONAL STANDARDS FOR AGRICULTURE Contents What are Occupational Standards(OS)? OS describe what individuals need to do, know and understand in order to carry out a particular
More informationTAEASS403 Participate in assessment validation. TAE Training and Education Training Package. Trainer and Assessor Guide
TAEASS403 Participate in assessment validation TAE Training and Education Training Package Trainer and Assessor Guide Written by Sandy Welton www.trainingresourcesrto.com.au Purpose of this Trainer and
More informationDelivering ILM qualifications to Management Trailblazer Apprenticeship Standards
Delivering ILM qualifications to Management Trailblazer Apprenticeship Standards Mapping the Level 5 ILM VRQ Diploma in Leadership and Management (600/5856/0) to the Operations/Departmental Manager Trailblazer
More informationNECA response to Quality of VET in Assessment. Discussion Paper
NECA response to Quality of VET in Assessment Discussion Paper Prepared by: Suresh Manickam Date: 11 March 2016 1 P a g e 11 March 2016 Senator Scott Ryan Minister for Vocational Education PO Box 6100
More informationLevel 2 Certificate in Principles of Customer Service. Qualification Specification
Qualification Specification ProQual 2014 Contents Page Introduction 3 The Qualifications and Credit Framework (QCF) 3 Qualification profile 4 Rules of combination 4 Credit transfer / Exemptions / Recognition
More informationNEW SOUTH WALES TECHNICAL AND FURTHER EDUCATION COMMMISSION STUDENT ASSESSMENT GUIDE - COURSE National Course Code: MEM50211
National Course Code: MEM211 Course qualification and name: Diploma of Engineering - Technical (Mechanical) Course Number: 10387 Version: 2 Course Outcomes: This course is designed for people who are employed
More informationCERTIFICATE III IN Course Code: BSB30215 CUSTOMER ENGAGEMENT Version 17.0
1300 731 602 CERTIFICATE III IN Course Code: BSB30215 CUSTOMER ENGAGEMENT Version 17.0 Welcome to Asset College! Asset College is a registered training organisation (RTO # 31718) delivering nationally
More informationAlberta Apprenticeship and Industry Training Board Action Plan
Alberta Apprenticeship and Industry Training Board 2016-2019 Action Plan contact Internet Alberta Apprenticeship and Industry Training Board Secretariat tradesecrets.alberta.ca phone 780-422-2920 toll
More informationThis qualification has been reviewed. The last date to meet the requirements is 31 December 2018.
NZQF NQ Ref 0880 Version 5 Page 1 of 7 National Certificate in Water Treatment (Level 4) Level 4 Credits 134 This qualification has been reviewed. The last date to meet the requirements is 31 December
More informationOverview IMIARBBP20. Carry Out Motor Vehicle Body Resistance Spot Welding Operations. Carry Out Motor Vehicle Body Resistance Spot Welding
Operations Overview This standard is about joining materials correctly and effectively using Resistance Spot welding techniques. 1 Operations Performance criteria You must be able to: 1. use the appropriate
More informationAirframe and Powerplant Technician. Course Description: Job Title: Airframe and Powerplant Technician
Transportation Course Description: This competency-based course includes instruction in general subjects related to both airframe and powerplant, including basic mathematics, basic physics, basic electricity,
More informationThe SkillsActive Wales Sector Offer
The SkillsActive Wales Sector Offer Workforce Development across Wales Active Leisure and Learning Sector August 2009 This document is to be targeted at both employers and key stakeholders to outline SkillsActive
More informationMAINTENANCE MANAGEMENT ACCREDITATION STANDARDS
Maintenance Management Accreditation Standards January 2007 Page 1 MAINTENANCE MANAGEMENT ACCREDITATION STANDARDS Maintenance Management Systems It is considered desirable to move heavy vehicle compliance
More informationGRADUATE DIPLOMA OF PORTFOLIO MANAGEMENT. Course Code: BSB Version 17.0
GRADUATE DIPLOMA OF PORTFOLIO MANAGEMENT Course Code: BSB80415 Version 17.0 Welcome to Asset College! Asset College is a division of Asset Training Australia (RTO # 31718) delivering nationally recognised
More informationYOUTH JOBS PATH EMPLOYABILITY SKILLS
YOUTH JOBS PATH EMPLOYABILITY SKILLS JOBACTIVE SERVICE DELIVERY PLAN RTO 90008 Disclaimer: While every reasonable effort was made to ensure that the information contained in this document is correct at
More informationThis qualification is expiring. The last date to meet the requirements is 31 December 2010.
NQF Ref 0209 Version 5 Page 1 of 11 National Certificate in Civil Construction Supervision with optional strands in Demolition; Drainage; Earthworks; Survey and Set Out; High Capacity Highways; Road Construction;
More informationPathways 6 Conference 2002 Conducting ANTA Training Package Equity Evaluations
Pathways 6 Conference 2002 Conducting ANTA Training Package Equity Evaluations ABSTRACT Ian Fegent TAFENSW Access Division Keywords: Training packages, ANTA, Equity evaluations TAFE NSW - Access Division
More informationBIIAB Level 2 Award for Personal Licence Holders
Qualification Handbook BIIAB Level 2 Award for Personal Licence Holders 603/2468/5 C00/1212/8 Version 2 Version 2 BIIAB October 2017 www.biiab.org Licence Holder handbook Version and date Version 2 October
More informationCompanion Volume Implementation Guide Release1
Companion Volume Implementation Guide Release1 FBP Food, Beverage and Pharmaceutical Training Package Version 1.0 December 2017 Skills Impact Contents Implementation Guide modification history... 3 Introduction...
More informationVehicle Restoration (England)
Vehicle Restoration (England) Issued by Institute of the Motor Industry Vehicle Restoration (England) Framework summary Vehicle Restoration Intermediate Level Apprenticeship in Vehicle Restoration This
More informationWagga Wagga RTO Vocational Education and Training STUDENT GUIDE Version. Insert training package title and code
Wagga Wagga RTO 90333 Vocational Education and Training STUDENT GUIDE 2015 Version Insert training package title and code Table of Contents Introduction... 3 Course Induction/Orientation and Enrolment
More informationAUSTRALIAN INSTITUTE of EDUCATION & TRAINING
AUSTRALIAN INSTITUTE of EDUCATION & TRAINING TRAINER HANDBOOK V.1.4 1 Welcome to the Australian Institute of Education and Training Hi, and welcome to the Australian Institute of Education and Training.
More informationCase for Endorsement MAR Maritime Training Package
Submission to National Skills Standards Council August 2013 Case for Endorsement MAR Maritime Training Package Version 1.0 Transport and Logistics Industry Skills Council (ABN 26 071 267 359) MAR Maritime
More informationGeneral Session 19 MAP 21 How MAP 21 Affects Junkyard Control April 16, 2013
Controls Conference - Hyatt Regency Savannah, Georgia - April 14-18, 2013 General Session 19 MAP 21 How MAP 21 Affects Junkyard Control April 16, 2013 Automotive Recyclers Association Chris Wright, President
More informationLevel 3 Award, Certificate and Diploma in Workbased Agriculture ( ) August 2015 Version 2.3 (September 2014)
QUALIFICATION HANDBOOK Level 3 Award, Certificate and Diploma in Workbased Agriculture (0066-81-82-83) August 2015 Version 2.3 (September 2014) Qualification at a glance Subject area Agriculture City &
More informationIMI ACCREDITATION CUSTOMER SERVICE
CUSTOMER SERVICE What is IMI Accreditation? IMI Accreditation is a practical, non-academic way to demonstrate individual capability, providing independent proof of current competence, knowledge and skills.
More informationCPC50210 Diploma of Building and Construction (Building)
CPC50210 Diploma of Building and Construction (Building) IN CLASS TRAINING AND ASSESSMENT Version number: 1.1 Version date: 23 rd November, 2017 Page 1 of 10 CPC50210 - DIPLOMA OF BUILDING AND CONSTRUCTION
More informationThe new Motor Vehicle Service and Maintenance Technician (Light Vehicle) apprenticeship standard
The new Motor Vehicle Service and Maintenance Technician (Light Vehicle) apprenticeship standard Wednesday 31 May 2017 Pat Santos Industry Manager (Transport and Logistics) Bill Twigg Category Manager
More informationAPPRENTICESHIP. Procurement
APPRENTICESHIP Procurement The Nova Scotia Apprenticeship Agency engages Nova Scotia employers and industry; designates trades for apprenticeship training and certification; registers and monitors apprenticeship
More informationIMPORTANT NOTIFICATION FOR ALL APPRENTICESHIP STARTS FROM 14 OCTOBER 2016
Management (Wales) IMPORTANT NOTIFICATION FOR ALL APPRENTICESHIP STARTS FROM 14 OCTOBER 2016 Modifications to SASW came into effect on 14 October 2016. These changes relate to the Essential Skills and
More informationCarry out off-road motorcycle training
Page 1 of 5 Carry out off-road motorcycle training Level 5 Credits 10 Purpose People credited with this unit standard are able to: prepare for a training session in riding motorcycles off-road; conduct
More informationLEVEL 2 AWARD IN EMPLOYEE RIGHTS AND RESPONSIBILITIES IN THE LOGISTICS INDUSTRY
LEVEL 2 AWARD IN EMPLOYEE RIGHTS AND RESPONSIBILITIES IN THE LOGISTICS INDUSTRY QUALIFICATION GUIDANCE England [60017405] Wales [C0003639] A2601-C2 Issue 4 June 17 About ABC Awards ABC Awards is a leading
More informationWeld using gas metal arc welding process. This assessment resource supports the unit of competency MEM05017 Weld using gas metal arc welding process.
Weld using gas metal arc welding process This assessment resource supports the unit of competency MEM05017 Weld using gas metal arc welding process. These materials were developed by Manufacturing Skills
More information4. Assessment and Recognition of Prior Learning
4. Assessment and Recognition of Prior Learning RTO Policy Purpose To state the Department s policy regarding assessment and Recognition of Prior Learning (RPL). This policy applies both: to the assessment
More information2/08/2017. Training and Assessment Strategy. Training Product. Core and Electives
Training and Assessment Strategy Training Product Core and Electives 1 Mode of Delivery Entry Requirements Duration and Scheduling 2 Amount of Training Assessment Resources Methods and Timing Learning
More informationApprenticeship Standards. Standards of Apprenticeship
Apprenticeship Standards Standards of Apprenticeship Commonwealth of Massachusetts Department of Labor Standards Division of Apprentice Standards Employer Program Sponsor Formulated By: Company: Manufacturing
More information