Conformity Assessment. Dan Cheetham BPV Requirements 4/12/16
|
|
- Charleen Hensley
- 6 years ago
- Views:
Transcription
1 Conformity Assessment Dan Cheetham BPV Requirements 4/12/16
2 BPV Requirements Boiler and Pressure Vessel Requirements (Quality Control Programs, Materials, Examination & Inspection, etc.) Quality Control Programs -Required elements -Auditable -Acceptance
3 BPV Requirements Materials -Materials produced to an ASTM specification or to an earlier edition of ASME. -Maintaining material ID -Additional requirements per UG-79 Examination and Inspection -Required examinations -Objective evidence Other Topics
4 Written Quality System Quality Control Programs -All elements required by the book section (Section I, IV, VIII div. 1 ), must be addressed. -The applicant/manufacturer may choose how to address required element using whatever format or system they want, as long as the system is written and is auditable. Acceptance of Manual revisions. (PG-105.4, HG-540.6, UG-117(f))
5 Written Quality System -The applicant/manufacturer may include additional requirements, but anything included must be followed. -All company personnel involved in the system should be assigned a controlled manual or at least have open access to a controlled manual. -Electronic manuals, maintained on a company server, may be used as long as the security of the QC Program is described.
6 Written Quality System -Sometimes a Team Leader may suggest that something be added to a Manual with good intentions, if it is not required to be addressed in a Manual, it doesn t have to be addressed! The AIA representative or the applicant has a right to know where the requirement is in the Code, before agreeing to add it to the Manual.
7 Written Quality System -Any procedures referenced in a manual must include Procedure name and number, and must be available for review by the JR Team. Common findings: Material Control section does not ensure that only the intended materials are being used. Manual does not specify who is responsibility Welding section does not require a WPS be available to the welder in the work area Certifications are not described Coded marking system not described
8 Written Quality System Questions?
9 Material Requirements Materials -Materials produced to an edition of ASTM specification only. (Section IIA and IIB Mandatory Appendix II) -Materials produced to an earlier edition of ASME. -Material marking requirements. -Receiving materials, welding materials. Is the receiving inspection different for plate and pipe, than for welding material? If so, why? Is it not Code material?
10 Material Requirements -How is material issued? System must ensure that only the intended materials may be used in Code fabrication. (Appendix A-320.4, F-202.4, 10-6) Welding material issuance. -Maintaining markings to the original required markings. Is a Coded marking system being used? (PG-77.2, UG-77(a))
11 Material Requirements -Common problems with materials -Markings not in accordance with the requirements of the material specifications, either not complete from manufacturer or not transferred properly at a supplier. -Coded markings applied by supplier to cut pieces, when the Code only allows coded marking by supplier of formed parts.
12 Material Requirements -Required certification does not indicate whether or not a formed part has been heat treated. And if cold formed with fiber elongation above 5%, the certification does not indicate what the temperature of the metal was when it was formed. (UG-79(c), UCS-79(d))
13 Material Requirements Questions?
14 Examination and Inspection Requirements Examinations and Inspection program -The purpose of a Joint Review is to review the manual and to review the implementation of the manual. The program must be fully implemented during a Joint Review
15 Examination and Inspection Requirements -Whatever the manual requires must be demonstrated. -If a deficiency is identified, the applicant must implement their program. If the program requires a Nonconformance Report (Or whatever it is called in your system) be issued, then that is what has to occur. If a deficiency is identified and fixed without generating the required document, then the system was not implemented. -It is not up to the Team to remind the applicant to generate the appropriate document.
16 Examination and Inspection Requirements -AIA s, remind your clients of this before the Joint Review. -Team Leaders, it is not your job to tell the applicant they must write an NCR! Let the applicant demonstrate their system, if they don t, then report they did not implement the system. You can remind them that they must implement their system, whatever it say, they must do.
17 Examination and Inspection Requirements -All examinations and inspections must be completed and signed off, before any welding can be demonstrated. Common deficiencies: ITP not being signed off before welding demo begins. Fit-up and tack weld examination not being performed. Welder not following WPS.
18 Other Topics Other topics -Has ASME a plan to certify material manufacturer? NDE provider? Design organizations? -Will ASME acknowledge other than English editions of the Code book? Revised CAP-22. AI s responsibility to verify applicable calculations have been made. U-2(g)
19 Other Topics CA-1, why only Section I? Usage of AIA Feedback form. Additional buildings, Temporary shops, Name change, relocation
20 BPV Requirements Questions?
Conformity Assessment. Dan Cheetham BPV Topics of Interest 2016 Certification 360
Conformity Assessment Dan Cheetham BPV Topics of Interest 2016 Certification 360 BPV Requirements Boiler and Pressure Vessel Requirements (Quality Control Programs, Materials, Examination & Inspection,
More informationConformity Assessment. Dan Cheetham Welding and NDE 4/12/16
Conformity Assessment Dan Cheetham Welding and NDE 4/12/16 Welding & NDE requirements Welding What is required for compliance with AMSE Code? -Welding Procedures and welder/welding operators qualified
More informationQuality Control Manual Submission Information
Table of Contents Quality Control Manual Submission Information 1.0 Legislative Requirement 1.1 Exemption to Legislative Requirement 2.0 Required content of Quality Control Manual 2.1 Title Page 2.2 Scope/
More informationQuality Control Manual Submission Information
330 1855 Victoria Avenue Regina, SK S4P 3T2 PH: (306)798-7111 Toll Free: (866)530-8599 FAX: (306)787-9273 Toll Free: (866)760-9255 Website: www.tsask.ca Table of Contents Quality Control Manual Submission
More informationACCREDITATION OF MANUFACTURERS OF BOILERS & PRESURE VESSELS
ACCREDITATION OF MANUFACTURERS OF BOILERS & PRESURE VESSELS [Not applicable to ASME Sec. IV, Cast Iron and Aluminum Boilers, ASME Sec. VIII Div 1, UG-90 (c) (2) and Graphite Vessels, ASME Sec. VIII, Div.
More informationHOW TO CONSTRUCT ASME BOILER BY THAI ASSOCIATION OF BOILOER AND PRESSURE VESSEL
HOW TO CONSTRUCT ASME BOILER BY THAI ASSOCIATION OF BOILOER AND PRESSURE VESSEL WHAT IS ASME The American Society of Mechanical Engineers set up a committee in 1911 for the purpose of formulating standard
More informationGuide for the preparation of quality programs for licensing of companies performing BPE regulated work.
Labour and Advanced Education Guide for the preparation of quality programs for licensing of companies performing BPE regulated work. Company Name: QC Program issue#: Revision# Overview: 1. This guideline
More information2001 NBIC Interpretations
2001 NBIC Interpretations INTERPRETATION 01-41 Subject: Appendix 2 and Appendix 5 with 2003 Addendum Question: In the event of an alteration to a boiler in which the boiler heating surface and steaming
More informationWelding Performance Qualification Test Administrators GUIDE FOR APPLICANTS
BRITISH COLUMBIA SAFETY AUTHORITY Welding Performance Qualification Test Administrators GUIDE FOR APPLICANTS Prepared by: Ed Hurd P.Eng. Provincial Safety Manager, Boilers Date: March 2, 2012 Controlled
More information"Welder Certification"
"Welder Certification" The purpose of this presentation is to introduce you to the various aspects of welder certification. This is not intended to cover all of the requirements for certification but only
More informationACCREDITATION OF MANUFACTURERS AND INSTALLERS OF PRESSURE PIPING PARTS AND SYSTEMS
ACCREDITATION OF MANUFACTURERS AND INSTALLERS OF PRESSURE PIPING PARTS AND SYSTEMS TSSA GUIDE FOR SURVEY TEAMS The Technical Standards and Safety Authority Boilers and Pressure Vessels Safety Division
More information"Welder Certification"
"Welder Certification" The purpose of this presentation is to introduce you to the various aspects of welder certification. This is not intended to cover all of the requirements for certification but only
More informationGUIDE FOR ASME REVIEW TEAMS FOR REVIEW OF APPLICANTS FOR ASME RP CERTIFICATE OF AUTHORIZATION. The American Society of Mechanical Engineers
GUIDE FOR ASME REVIEW TEAMS FOR REVIEW OF APPLICANTS FOR ASME RP CERTIFICATE OF AUTHORIZATION The American Society of Mechanical Engineers Two Park Avenue New York, NY 10016 BPV GUI 04 11 08 2017 0 P age
More informationM. F. Sullivan. 9/27/2016 Dr. Sandor Somogyi
The Code is a large document and it is sometimes very difficult to understand. Even for many of us who work with it every day. In my opinion there is no one person who could be termed as a Code Expert.
More informationJOHN WOOD UNCONTROLLED COPY: THE JOHN WOOD COMPANY PO BOX HIGHLAND AVENUE OAKS, PENNSYLVANIA 19456
JOHN WOOD QUALITY CONTROL SYSTEM MANUAL FOR PRESSURE VESSELS CONSTRUCTED TO ASME BOILER & PRESSURE VESSEL CODE SECTION VIII, DIVISION 1 AND REPAIRS AND ALTERATIONS TO METALLIC PRESSURE RETAINING ITEMS
More informationGUIDE FOR ASME REVIEW TEAM LEADERS FOR REVIEW OF APPLICANTS FOR ASME CERTIFICATES OF AUTHORIZATION H (Cast Iron/Cast Aluminum)
GUIDE FOR ASME REVIEW TEAM LEADERS FOR REVIEW OF APPLICANTS FOR ASME CERTIFICATES OF AUTHORIZATION H (Cast Iron/Cast Aluminum) The American Society of Mechanical Engineers Two Park Avenue New York, NY
More informationPressure Piping Construction Requirements QMS written description verification CHECKLIST AB-518b
QMS written description verification CHECKLIST AB-518b Company Name: Company Address: Title of the written description of the management system or manual(s): Person responsible for the overall management
More informationASME CODE CHANGES 2015 EDITION
ASME CODE CHANGES 2015 EDITION SECTION I 2015 Edition published July 1, 2015, mandatory January 1, 2016. No more addenda. Publish every 2 years. Table A-360 : All ASME standards reference current year
More informationPressure Points. Governing Code Edition Section I Table of Contents
Table of Contents Governing Code Edition... 1 Navigating the use of Small Products NX-2610... 3 Third Party Inspection... 4 ASME Three-Day Seminar... 6 Governing Code Edition Section I - 2017 The governing
More informationNR CHECKLIST Rev. 1. QAM IMP References NBIC Part 3, 1.8 Y N Y N a. Organization. Company Name/Certificate Number: Page 1 of 26
Company Name/Certificate Number: Page 1 of 26 a. Organization a.1. Has the Organizational Structure of the program identified the levels of management responsible for the Quality System Program, including
More informationConformity Assessment. Section III Nuclear Requirements Buenos Aires, Argentina May 2017
Conformity Assessment Section III Nuclear Requirements Buenos Aires, Argentina May 2017 ASME Section III Requirements Workshop Scope ASME Certificates of Authorization Quality Assurance Requirements Discussion
More information1.0 Purpose: To provide a method of assuring that Section XI Repair and Replacement activities. 3.1 ASME B&PV Code, Section XI, Article IWA-4000
Activity: ASME Section XI Repair and Replacement 1.0 Purpose: To provide a method of assuring that Section XI Repair and Replacement activities are in compliance with applicable standards, regulations
More informationASME NQA-1 Certification. Matthew Vazquez September 4, 2017
ASME NQA-1 Certification Matthew Vazquez September 4, 2017 NQA-1 Certification The ASME NQA-1 Certification Program seeks to meet the needs of the nuclear industry by expanding the supply chain with organizations
More informationWelding Performance Qualification Test Administrators GUIDE FOR APPLICANTS
TECHNICAL SAFETY BC Welding Performance Qualification Test Administrators GUIDE FOR APPLICANTS Date: October 12, 2017 Controlled Document: MAN-4018-02 MAN-4018-02 Page 1 of 27 Contents 1.0 Introduction...
More informationNB-435 Rev. 1 Page 2 of 5
The National Board has developed this Body of Knowledge to outline duties and responsibilities for individuals performing inspections during the construction phase of nuclear components, parts, and appurtenances
More informationWelding Performance Qualification Test Administrators GUIDE FOR APPLICANTS
BRITISH COLUMBIA SAFETY AUTHORITY Welding Performance Qualification Test Administrators GUIDE FOR APPLICANTS Date: April 25, 2017 Controlled Document: MAN-4018-01 MAN-4018-01 Page 1 of 27 Contents Contents...
More informationHSB Global Standards ASME Code Changes and Discussions ASME Code Section VIII-1 and Referencing Code Section IX
HSB Global Standards ASME Code Changes and Discussions ASME Code Section VIII-1 and Referencing Code Section IX Presented by: David M. Allore Field Services Manager September 21, 2011 Introduction Largest
More informationOWNER USER INTEGRITY MANAGEMENT SYSTEM WRITTEN DESCRIPTION CHECKLIST AB-512(b)
Company Name: Written Description of QMS Title and Rev. Status: Person who is responsible for preparing the owner s QMS written description: Name: Title: Telephone No.: ( ) Fax No.: ( ) Cell No.: ( ) E-Mail:
More informationSpecification for Pipe Fittings
Specification for Pipe Fittings Specification for Pipe Fittings Page 1 of 11 Table of Contents 1.0 SCOPE...3 2.0 DEFINITIONS...3 3.0 REFERENCES, CODES AND STANDARDS...3 4.0 CONTRACTOR'S RESPONSIBILITIES...4
More informationACCREDITATION OF FITTING MANUFACTURERS
ACCREDITATION OF FITTING MANUFACTURERS TSSA GUIDE FOR REVIEW TEAMS The Technical Standards and Safety Authority Boilers and Pressure Vessels Safety Division 3300 Bloor Street West 14th Floor, Centre Tower
More informationDOCUMENT CONTROL INFORMATION
DOCUMENT CONTROL INFORMATION System: Document Title: Document Status: Quality Manual Approved 5 11/5/2014 Current Document Revision Details Formal review. Added section 2, 3. Revised section 5.5.2, 6.2,
More informationREFERENCE SYLLABUS. for WELDING EXAMINER & WELDING EXAMINER IN TRAINING CERTIFICATES OF COMPETENCY EXAMINATIONS
WELDING EXAMINER & CERTIFICATES OF COMPETENCY S AB-94 Edition 2, Revision 0, 2016-05-01 GENERAL INFORMATION INTRODUCTION: This Syllabus is intended to assist candidates in preparing the Welding Examiner
More informationACCREDITATION OF PRESSURE RELIEF VALVE REPAIR ORGANIZATIONS
ACCREDITATION OF PRESSURE RELIEF VALVE REPAIR ORGANIZATIONS TSSA GUIDE FOR SURVEY TEAMS The Technical Standards and Safety Authority Boilers and Pressure Vessels Safety Division 3300 Bloor Street West
More informationInspection and Test Plan for Gas Turbine
and Test Plan for Gas Turbine No. and Test Plan Reference Document Acceptance Criteria Verifying Document Activity By Remark Manuf. TPI Client 1 Pre Meeting Spec. Spec. MOM H H H Before Manufacturing 2
More informationMichael Pischke Alfa Laval Inc. Traditional Vessel Manufacturing. Inspector & Quality Manager Roles. Pressure Vessel Mass Production
The Authorized Inspector - Manufacturer Relationship in a Mass Production Shop Michael Pischke Alfa Laval Inc. Discussion Topics Traditional Vessel Manufacturing The Shop Inspection Process Inspector &
More informationQuality Manual 2012 `
Quaality Man nual 2012 2 ` Section : I Page : 1 of 1 Quality Control Manual Title Page Edition : III Revision : 1 Date: 21 / 10 / 2012 Copy No. Controlled Uncontrolled Project Services Company PSC (S.A.E.)
More informationGuide for AWS Visual Weld Inspection
Guide for Visual Weld Overview & Contents Scope This guide is intended to assist Owner/Operators, Contractors, Authority Having Jurisdiction (AHJ) personnel, Inspectors, Manufacturers and Contractors/Fabricators
More informationTABLE OF CONTENTS. 1.0 INTRODUCTION Page SCOPE Page REFERENCES Page REQUIREMENTS Page QUALITY ASSURANCE Page 8
TABLE OF CONTENTS 1.0 INTRODUCTION Page 3 2.0 SCOPE Page 3 3.0 REFERENCES Page 4 4.0 REQUIREMENTS Page 5 5.0 QUALITY ASSURANCE Page 8 6.0 SUBMITTALS Page 9 7.0 PREPARATION FOR SHIPMENT Page 10 Page 2 of
More informationAssuring Integrity While Bringing Efficiencies to American Industry. What Is Common Arc?
Assuring Integrity While Bringing Efficiencies to American Industry 1 What Is Common Arc? Formed by NACBE January 1988 Not-for-profit corporation formed to: Foster and advance interests of Construction
More informationPressure Piping Construction Requirements
the pressure equipment safety authority Pressure Piping Construction Requirements AB 518 Edition 8, Revision 0 Issued 2017-08-24 Table of Contents FOREWORD... 1 1.0 SCOPE OF THIS DOCUMENT... 2 2.0 DEFINITIONS
More informationUNCONTROLLED QUALITY CONTROL MANUAL FOR. FISHER CONTROLS INTERNATIONAL, LLC, VALVE DIVISION 1702 SOUTH 12 th AVENUE MARSHALLTOWN, IA 50158
Section 000 Issue II Revision 0, 7/18/2006 Revision 1, 7/20/2006 Revision 2, 6/22/2009 Revision 3, 6/29/2009 Revision 4, 9/24/2009 Revision 5, 1/17/2012 Revision 6, 8/30/2012 Revision 7, 3/5/2014 Revision
More informationINSPECTION OF PRESSURE VESSELS TO ASME Section VIII Div. 1
TAKING PRESSURE VESSELS FROM CRADLE TO GRAVE SEMINAR INSPECTION OF PRESSURE VESSELS TO ASME Section VIII Div. 1 Manish Waghare ABSG Consulting Inc., Singapore January 28, 2011 May 29, 2011 1 Presentation
More informationPART UIG THE ASME CODE FOR IMPREGNATED GRAPHITE PRESSURE VESSELS
PART UIG THE ASME CODE FOR IMPREGNATED GRAPHITE PRESSURE VESSELS Presented by: Ed Soltow Engineering and Design Manager SGL Carbon Technic LLC Member ASME Standards Committee on Pressure Vessels (BPV VIII)
More informationSTEEL FABRIC ATION QUALITY SYSTEMS GUIDELINE I NSTI TU T C AN ADI E N DE L A C ONS T R UC T I ON E N AC I E R
STEEL FABRIC ATION QUALITY SYSTEMS GUIDELINE CANADIAN INSTITUTE C A NA DI A N I NS T I T UT E OF S T E E L C ONS T R UC T I ON I NSTI TU T C AN ADI E N DE L A C ONS T R UC T I ON E N AC I E R OF STEEL
More informationPresented by: Gary Scribner Manager of Technical Services. Shanghai April The National Board of Boiler and Pressure Vessel Inspectors
Presented by: Gary Scribner Manager of Technical Services Shanghai April 2016 1. Provides administrative and technical rules, and guidelines to follow for repairing or altering a pressure retaining item.
More informationWelding Performance Testing Administrators GUIDE FOR ASSESSMENT OF QUALITY CONTROL MANUALS
TECHNICAL SAFETY BC Welding Performance Testing Administrators GUIDE FOR ASSESSMENT OF QUALITY CONTROL MANUALS Date: October 12, 2017 Controlled Document: MAN-4017-02 MAN-4017-02 (2017-10-12) Page 1 of
More informationWelding Performance Testing Administrators GUIDE FOR ASSESSMENT OF QUALITY CONTROL MANUALS
BRITISH COLUMBIA SAFETY AUTHORITY Welding Performance Testing Administrators GUIDE FOR ASSESSMENT OF QUALITY CONTROL MANUALS Date: May 1, 2017 Controlled Document: MAN-4017-01 MAN-4017-01 (2017-05-01)
More informationCQR-1. CONTRACTOR QUALITY REQUIREMENTS for CONSTRUCTION SERVICES Revision Date: 6/8/2015
CQR-1 CONTRACTOR QUALITY REQUIREMENTS for CONSTRUCTION SERVICES Revision Date: 6/8/2015 SCOPE This document establishes the minimum quality program requirements for a contractor providing equipment, material,
More informationOntario ENGINEERING STANDARD SPECIFICATION 1/8 REV. SPECIALTY ENGINEERING MATERIALS ENGINEERING QA COPPER CLIFF SMELTER FLUID BED DRYER TUYERES
SPEC-8048 1/8 Rev Description Approved by Reviewed by Issue Date YYYY/MM/DD 1 Document format and number changed. Previous number QA-017 PB 2011/12/24 PB 2011/12/24 2012/04/19 2 Modified sections 6 and
More informationSECTION WELDING
SECTION 05050 WELDING PART 1 GENERAL 1.1 REFERENCES A. The following is a list of standards which may be referenced in this section: 1.2 DEFINITIONS 1. American Society of Mechanical Engineers (ASME):
More informationREFERENCE SYLLABUS. for WELDING EXAMINER & WELDING EXAMINER IN TRAINING CERTIFICATES OF COMPETENCY EXAMINATIONS
WELDING EXAMINER & CERTIFICATES OF COMPETENCY S AB-94 Edition 1, Revision 6, 2016-05-01 This syllabus is being phased out and will be discontinued on April 30, 2018. GENERAL INFORMATION INTRODUCTION: This
More informationSUPPLIER QUALITY SCOPE AND FACILITY QUESTIONNAIRE. Bantrel Co. Project #:
Bantrel Co. Project #: COMPLETED BY: DATE: SUPPLIER NAME: D & B NUMBER: CONTENTS 1.0 GENERAL INFORMATION 2.0 PERSONNEL 3.0 QUALITY PROGRAM 4.0 SUPPLIER / CONTRACTOR INFORMATION 5.0 SCOPE OF FABRICATION
More informationPressure Equipment Repair and Alteration Requirements
the pressure equipment safety authority Pressure Equipment Repair and Alteration Requirements AB-513 Edition 3, Revision 0 - Issued 2018-01-30 Table of Contents FOREWORD... iii 1.0 INTRODUCTION... 1 2.0
More informationCertified Welding Fabricator (CWF) Program Information
Certified Welding Fabricator (CWF) Program Information (The enclosed documents provide information about the AWS Certified Welding Fabricator Program.) General Program Information Program Requirements
More informationConformity Assessment
Conformity Assessment Jon Labrador ASME Perspective & Benefits Buenos Aires, Argentina 2017 What Is ASME Conformity Assessment? J The recognition of a company s or individual s capability to fulfill the
More informationBuongiorno! ASME N3 & NQA-1Certification Benefits to D&D Ventures. Dr. Dirk Kölbl. Authorized Inspector Supervisor NQA-1 Lead Auditor
Buongiorno! ASME N3 & NQA-1Certification Benefits to D&D Ventures Dr. Dirk Kölbl Authorized Inspector Supervisor NQA-1 Lead Auditor Rome March 20th, 2018 09 / 2015 Affiliation with ASME Selling Codes Selling
More informationUNCONTROLED MANUAL ELECTRONIC VERSION
Section 1 Page 1 BMT-NW Acquisition LLC 60 Tower Boulevard Elma, WA 98541-9161 Title Page Quality Control Manual Edition 3 For Design, Assembly and Fabrication of Power Boilers, Pressure Vessels and Power
More informationEur Ing Ian Hogarth CEng CIWE CEWE EWIE FWeldI Principle Compliance Verification Engineer TWI Certification Ltd. BS EN ISO 3834
Eur Ing Ian Hogarth CEng CIWE CEWE EWIE FWeldI Principle Compliance Verification Engineer TWI Certification Ltd. TWIN 19 th January 2015 BS EN ISO 3834 Why is it important, and what s in it for you 1 EN
More informationProject Execution Tender to Design to Fabrication
Project Execution Tender to Design to Fabrication Brief Overview of the Main Activities from Tender stage to Fabrication of ASME VIII Vessel Presented By: HS Compression & Process Pte Ltd (Member of Hiap
More informationThompson Construction Group
Thompson Construction Group Solutions for Industrial Progress Whatever the industry, Thompson is here with the expertise needed for your construction project. Our specialists deliver the highest caliber
More informationConformity Assessment. Jon Labrador & Paul Lang ASME Perspective & Benefits September 2016
Conformity Assessment Jon Labrador & Paul Lang ASME Perspective & Benefits September 2016 What Is ASME Conformity Assessment? J The recognition of a company s or individual s capability to fulfill the
More informationFrazier Reliability Solutions
Frazier Reliability Solutions Mechanical Integrity Audit Checklist Location: Completed By: Date: MI Program Management Yes No Does the company and/or site have a documented MI policy? Does the MI program
More informationDemonstration Of NDE Procedures Why, What And How?
National Seminar & Exhibition on Non-Destructive Evaluation, NDE 2014, Pune, December 4-6, 2014 (NDE-India 2014) Vol.20 No.6 (June 2015) - The e-journal of Nondestructive Testing - ISSN 1435-4934 www.ndt.net/?id=17891
More informationEur Ing Ian Hogarth CEng CIWE CEWE EWIE FWeldI Principle Compliance Verification Engineer TWI Certification Ltd.
Eur Ing Ian Hogarth CEng CIWE CEWE EWIE FWeldI Principle Compliance Verification Engineer TWI Certification Ltd. Nuclear Supply Chain TWI Aberdeen 8 October 2015 BS EN ISO 3834 Why is it important, and
More informationConformity Assessment. Paul Lang & Mike Frediani ASME Perspective & Benefits February 2017
Conformity Assessment Paul Lang & Mike Frediani ASME Perspective & Benefits February 2017 What Is ASME Conformity Assessment? The recognition of a company s or individual s capability to fulfill the requirements
More informationOntario ENGINEERING STANDARD SPECIFICATION 1/7 REV. SPECIALTY ENGINEERING MATERIALS ENGINEERING QA CLARABELLE MILL NI-HARD TYPE 1 LINERS
1/7 Rev Description Approved by Reviewed by Issue Date YYYY/MM/DD 1 Document format and number changed. Previous number QA - 015 PB 011/1/4 PB 011/1/4 01/04/19 SPEC Reviewed 016 Regional Approvals removed,
More informationApplication Document Submittal for AISC Certification - Fabricators and Manufacturers
This document submittal checklist applies to Building Fabricators, Bridge Fabricators, Hydraulic Fabricators and Metal Component Manufacturers. The Fracture Critical endorsement is only available to Bridge
More informationSQAR-1. SUPPLIER QUALITY ASSURANCE REQUIREMENTS for DESIGN AND PROCUREMENT SERVICES Revision Date: 2/1/2018
SUPPLIER QUALITY ASSURANCE REQUIREMENTS for DESIGN AND PROCUREMENT SERVICES Revision Date: 2/1/2018 1.0 SCOPE This document establishes the quality program requirements for an organization providing engineering
More informationQUALITY ASSURANCE PROTOCOL (QAP)
PREFACE This Standard details the level of documentation that PVT.LTD (IET) will provide during a contract for fabricating tank(s) or portable equipment s. Extensive documentation is required for this
More informationNUCLEAR QUALITY ASSURANCE MANUAL
NUCLEAR QUALITY ASSURANCE MANUAL COLUMBIANA HI TECH 1621 Old Greensboro Road, Kernersville, NC 27284 INTRODUCTION The Columbiana Hi Tech. Nuclear Quality Assurance Manual for 10 CFR Part 71, Subpart H,
More informationKOPETZ BUSINESS PROCESS MAP LEVEL 1 INQUIRY TO DELIVERY
KOPETZ BUSINESS PROCESS MAP LEVEL 1 INQUIRY TO DELIVERY Sales Quality Accounting Shipping Receiving Purchasing Engineering Estimating Control Acquire Order Initiate Job Initiate Job Purchase,, and Approve
More informationUNIFIED FACILITIES GUIDE SPECIFICATIONS
USACE / NAVFAC / AFCEC / NASA UFGS-05 14 00.13 (May 2015) -------------------------------- Preparing Activity: NASA Superseding UFGS-05 14 00.13 (November 2010) UNIFIED FACILITIES GUIDE SPECIFICATIONS
More informationINTERNATIONAL ASSOCIATION OF PLUMBING AND MECHANICAL OFFICIALS UNIFORM EVALUATION SERVICES
INTERNATIONAL ASSOCIATION OF PLUMBING AND MECHANICAL OFFICIALS UNIFORM EVALUATION SERVICES EVALUATION CRITERIA FOR STRUCTURAL STEEL APPROVED FABRICATOR INSPECTION PROGRAMS 1.0 PURPOSE EC 020-2014 (Adopted
More informationDIRECTIVE Use of ASME Code Case 2596 in Alberta
Information Bulletin No. IB13-008 July 26, 2013 DIRECTIVE Use of ASME Code Case 2596 in Alberta Background ASME Code Case 2596 provides the requirements for design and construction of coldstretching austenitic
More informationACCREDITATION OF BOILER AND PRESSURE VESSEL REPAIR OR ALTERATION ORGANIZATIONS
ACCREDITATION OF BOILER AND PRESSURE VESSEL REPAIR OR ALTERATION ORGANIZATIONS TSSA GUIDE FOR SURVEY TEAMS The Technical Standards and Safety Authority Boilers and Pressure Vessels Safety Division 3300
More informationASTM A420-Standard Specification for Piping Fittings of Wrought Carbon Steel and Alloy Steel for Low-Temperature Service
ASTM A420-Standard Specification for Piping Fittings of Wrought Carbon Steel and Alloy Steel for Low-Temperature Service 1. Scope 1.1 This specification 2 covers wrought carbon steel and alloy steel fittings
More informationAGSI Certification Pvt. Ltd. 208, Kartik Complex, New Link Road, Andheri (West), Mumbai
(Note: Quality policy awareness, Quality objectives, Control of documented information, Communication, Continual improvement, Responsibility and authority, Competency may be audited at each of the following
More informationTUV / IICS 3.1 CERTIFIED WELDING INSPECTOR & API 577 WELDING INSPECTION & METALLURGY
LAST UPDATED 06-04-2018 TUV / IICS 3.1 CERTIFIED WELDING INSPECTOR & API 577 WELDING INSPECTION & METALLURGY COURSE DURATION: 7 DAYS ARE YOUR INSPECTORS / ENGINEERS PREPARED TO DEAL WITH THE RISING DEMAND
More informationDMS-7370 Steel Bridge Member Fabrication Plant Qualification
Steel Bridge Member Fabrication Plant Qualification Effective Date: January 2015 1. DESCRIPTION This Specification describes the qualification processes for fabrication plants producing steel bridge members,
More informationCanadian Welding Bureau Comparative Review AWS D1.1 vs CSA W47.1 & CSA W59
Comparative Review Canadian Bureau Comparative Review The Similarities and Differences This document summarizes the similarities and key difference in the requirements between welding standards published
More informationWelding ASME Quality Manual Sample - No Field Installation Selected pages (not a complete plan)
Welding ASME Quality Manual Sample - No Field Installation Selected pages (not a complete plan) Part 1: Company Part 2: Forms Contact: First Time Quality 410-451-8006 Pat [Pick the date] [CompanyName]
More informationSUPPLIER QUALITY SYSTEM SURVEY
SUPPLIER QUALITY SYSTEM SURVEY DATE (M/d/yy): 55 Dragon Court Woburn, MA 01801 Tel: (781) 933-7300 Fax: (781) 935-4529 GENERAL INFORMATION Supplier Name: Physical Address: City: State: Zip: Sr. Company
More informationM9C 1A3 VELO (PH) (FX)
PROFESSIONAL DEVELOPMENT COURSES ANRIC Enterprises Inc. 701 Evans Ave, Suite 202 Toronto, ON M9C 1A3 (PH) 416-253-9459 (FX) 416-252-2553 www.anric.com PROFESSIONAL DEVELOPMENT COURSES CONTENTS INTRODUCTORY
More informationQUALITY CONTROL MANUAL
QUALITY CONTROL MANUAL Page 1 of 10 TABLE OF CONTENTS CONTENTS PAGE General Information 3 Statement of Policy and Authority 3 Control of the QC Manual (Section I) 4 Responsibility of Key Personnel (Section
More informationSECTION METAL WELDING
SECTION 05222 - METAL WELDING PART 1 - GENERAL 1.01 SECTION INCLUDES A. Welding Rod/Electrodes B. Stud Shear Connectors C. Shop Welding D. Inspections and Tests by the Contractor E. Inspections and Test
More informationPresented by: Gary Scribner Manager of Technical Services. August The National Board of Boiler and Pressure Vessel Inspectors
Presented by: Gary Scribner Manager of Technical Services August 2016 2 3 PART 3, SECTION 1 REPAIRS AND ALTERATIONS GENERAL AND ADMINISTRATIVE REQUIREMENTS Additional administrative rules can be found
More informationReview of Changes in ASME Section V (NDE) Edition 2017
Review of Changes in ASME Section V (NDE) Edition 2017 More info about this article: http://www.ndt.net/?id=22322 Diwakar D. JOSHI and Pradeep KUMAR Insight Quality Services, 507/508, Siddharth Towers,
More informationWashington Association of Building Officials. Standard 1702 Steel Fabricator Registration Program
Washington Association of Building Officials Standard 1702 Steel Fabricator Registration Program July 2010 1 Steel Fabricator Registration Program Scope: This registration program was developed to assist
More informationApplication for an Ontario Certificate of Authorization For businesses based Outside Ontario CSA N285.0 Nuclear Components
345 Carlingview Drive PRINT Click to clear On completion, send this form to the attention of Boilers and Pressure Vessels Safety at the top left TSSA address. Company: (Legal Company Name and Corporation
More informationDeep Panuke. 01U 02 May 2013 Issued for Use John Nowlan Hugh Farrell R. MacQueen
01U 02 May 2013 Issued for Use John Nowlan Hugh Farrell R. MacQueen Rev Date Reason for Issue Prepared Checked Approved Title OP16 Prequalification Questionnaire DM EN PQ OP 0003 01U Project Originator
More informationOIL TECH SERVICES, INC.
OIL TECH SERVICES, INC. 800 Wilcrest, Suite 100 Houston, TX 77042-1359 (310)-527-2695 (713) 789-5144 E Mail: mlombard@itmreps.com Website: www.itmreps.com WELDING Weld Procedure Specifications (WPS): Welding
More informationQualification of manufacturers of special materials
SERVICE SPECIFICATION DNVGL-SE-0079 Edition June 2016 Qualification of manufacturers of special materials The electronic pdf version of this document found through http://www.dnvgl.com is the officially
More informationOctober Purpose
ACCREDITED INSPECTION AGENCIES: GUIDELINES FOR CONDUCTING BIANNUAL INSPECTIONS OF MANUFACTURERS ACCREDITED TO THE IAS ACCREDITATION CRITERIA FOR INSPECTION PROGRAMS FOR METAL BUILDING SYSTEMS October 2008
More information1.0 Purpose. 2.0 General notes 3.0 QUALITY SYSTEM REQUIREMENTS. Approved by: G. Stugart Prepared by: Schelert
1.0 Purpose This document defines PECO-Astronics (PECO) purchased material flow-down requirements. Additional specifications may also apply and will be documented on the purchase order; all requirements
More informationINDRAPRASTHA GAS LIMITED. (IGL) CITY GAS DISTRIBUTION PROJECT IN NCT OF DELHI & NCR
(2 to 18 SIZE) INDRAPRASTHA GAS LIMITED. (IGL) CITY GAS DISTRIBUTION PROJECT IN NCT OF DELHI & NCR PARTICULAR TECHNICAL SPECIFICATION T PIPELINE VALVES (2 to 18 SIZE) A 06.12.2016 Issued as Standard Specification
More informationFacilities Planning and Construction (FP&C)
Appendix 8.4a Facilities Planning and Construction (FP&C) UAA FP&C Quality Assessment Checklist (A) Project: PM: Project ID: Updated:
More informationDESIGN REGISTRATION GUIDELINES FOR NUCLEAR PRESSURE RETAINING SYSTEMS AND COMPONENTS
Boilers and Pressure Vessels Safety Division Technical Standards & Safety Authority 14th Floor, Centre Tower 3300 Bloor Street West Toronto, Ontario Canada M8X 2X4 www.tssa.org DESIGN REGISTRATION GUIDELINES
More informationMATERIALS OF CONSTRUCTION FOR PROCESS EQUIPMENT AND PIPING SYSTEMS
MATERIALS OF CONSTRUCTION FOR PROCESS EQUIPMENT AND PIPING SYSTEMS SECTOR / ENGINEERING NON-TECHNICAL & CERTIFIED TRAINING COURSE Appropriate material selection is the cornerstone of pressure equipment
More informationNRC INSPECTION MANUAL
NRC INSPECTION MANUAL NMSS/RII INSPECTION PROCEDURE MECHANICAL COMPONENTS PROGRAM APPLICABILITY: 2630-01 INSPECTION OBJECTIVES 01.01 To determine whether the technical requirements detailed or referenced
More information(Name and address of Manufacturer) (Name and address of Purchaser) (Name and address)
FORM U-3P MANUFACTURER'S CERTIFICATE OF COMPLIANCE FOR PLATE HEAT ECHANGERS COVERING PRESSURE VESSELS TO BE STAMPED WITH THE UM DESIGNATOR [SEE U-1(j)] As Required by the Provisions of the ASME Boiler
More information