La Société Nationale de Certification et d Homologation

Size: px
Start display at page:

Download "La Société Nationale de Certification et d Homologation"

Transcription

1 La Société Nationale de Certification et d Homologation 1

2 One of the smallest of the 28 European Union countries Total of km2 (nearly square miles) inhabitants Borders with Belgium on the West and the North, with Germany on the East and with France on the South Center of the Grande Région 2

3 Luxembourg: - an attractive country for foreign companies, due to its neutral status in the heart of Europe - one of the 6 creators of the European Economic Community (1957) 3

4 SNCH: Origine and activities 1980: Start of the first activities in the field of automotive type approvals (E/e 13-marking) as a departement of the Ministry of Transports in Luxembourg 1987: Creation of a seperate legal entity SNCH, owned 100% by the Luxembourgish Gouvernment (mainly Ministry of Transports and Ministry of Economical Affaires) 4

5 Type approval in Europe There are two kinds of vehicle certification: Emissions, noise, safety, identification and all other aspects: type-approval 5

6 Type approval by SNCH SNCH is the UNECE and EC recognized authority of the G-D of Luxembourg, for all regulations from Geneva and directives from the European Community in Brussels Type approval of entire vehicles, their components and technical units SNCH is the only UNECE/EC type approval authority accredited ISO EN and ISO IEC17021 SNCH is active worldwide 6

7 Type approval department Why Luxembourg? Neutral Gateway No national priorities No own technical service or laboratory Flexible language SNCH is accredited EN ISO

8 Requirements for technical services following directive 2007/46/EC Category A: EN / ISO laboratories Category B: EN / ISO inspection Category C: EN / EN/ISO 17021quality audit Category D: EN/ISO test / COP 8

9 Homologation department Technical services authorized to act for SNCH, following standards ISO and ISO TUV Rheinland Luxembourg GmbH Luxcontrol s.a. ATEEL s.à r.l. 9

10 Homologation department Type approval procedure: 2007/46/CE article 11 defines how tests are to be done following the general principle 715/2007/CE resp. 692/2008/CE defines the exact rules for emission tests. The specific procedures, tests and requirements for type approval are precisely fixed to guarantee a harmonized approach. 10

11 Estimation de l évolution européenne SNCH 715/2007 total /2007 new /2007 extension total homologations SNCH estimations total Europe

12 Estimation de l évolution européenne Total européen SNCH

13 Estimation de l évolution européenne 13

14 Accreditation EA Members: The European co-operation for Accreditation or EA is an association of national accreditation bodies in Europe that are officially recognized by their national Governments to assess and verify (against international standards) organisations that carry out evaluation services such as certification, verification, inspection, testing and calibration (also known as conformity assessment services). 14

15 Accreditation EA Members The EA MLA is recognized at international level by ILAC (International Laboratory Accreditation Cooperation) and IAF (International Accreditation Forum). This means that a test report or certificate accredited by an EA MLA signatory is also recognized by the signatories to the IAF and ILAC multilateral agreements. In this way, the EA MLA acts as an international passport to trade. 15

16 Accreditation The accreditation is the confirmed international way of proving competence, neutrality and independence Peer to peer in the field of type approval would lead to hidden agreements and not transparent systems In a first step, the new framework regulation should fix the requirement for the authorities to be conform to accreditation standards. In a next step an official accreditation could be mandatory. 16

17 Economical Relation Economical relation with industry: In the frame of the surveillance by the type approval authority, the financial relation between technical service and manufacturer should be analysed in future. The manufacturer and the technical service should be obliged to publish their financial relation on request by the European Commission or type approval authority 17

18 La Société Nationale de Certification et d Homologation Thank you very much for your attention 18

EA MULTILATERAL AGREEMENT Facilitating cross border trade with reliable goods and services

EA MULTILATERAL AGREEMENT Facilitating cross border trade with reliable goods and services EA MULTILATERAL AGREEMENT Facilitating cross border trade with reliable goods and services The importance of accreditation of conformity assessment bodies has substantially increased over the last decades.

More information

Delivering a safer world

Delivering a safer world HOW ACCREDITATION, EA AND ITS MEMBERS CONTRIBUTE TO A SAFER WORLD Delivering a safer world World Accreditation Day 9 June 2018 (#WAD2018) 9 June is the World Accreditation Day, a global initiative, jointly

More information

ACCREDITATION A TOOL TO SUPPORT REGULATORS

ACCREDITATION A TOOL TO SUPPORT REGULATORS ACCREDITATION A TOOL TO SUPPORT REGULATORS ACCREDITATION 5 CONFORMITY ASSESSMENT 9 ASSURANCE OF COMPETENCE 13 EA, EUROPEAN CO-OPERATION FOR ACCREDITATION 17 INTERNATIONAL AGREEMENTS 19 PUBLIC AND PRIVATE

More information

ACCREDITATION A TOOL TO SUPPORT REGULATORS

ACCREDITATION A TOOL TO SUPPORT REGULATORS ACCREDITATION A TOOL TO SUPPORT REGULATORS ACCREDITATION CONFORMITY ASSESSMENT ASSURANCE OF COMPETENCE EA, EUROPEAN CO-OPERATION FOR ACCREDITATION INTERNATIONAL AGREEMENTS PUBLIC AND PRIVATE BENEFITS

More information

ACCREDITATION A TOOL TO SUPPORT REGULATORS

ACCREDITATION A TOOL TO SUPPORT REGULATORS ACCREDITATION A TOOL TO SUPPORT REGULATORS ACCREDITATION CONFORMITY ASSESSMENT ASSURANCE OF COMPETENCE EA, EUROPEAN CO-OPERATION FOR ACCREDITATION INTERNATIONAL AGREEMENTS PUBLIC AND PRIVATE BENEFITS

More information

The Pressure Equipment Directive 2014/68/EU. Photo: nostal6ie/ Shutterstock

The Pressure Equipment Directive 2014/68/EU. Photo: nostal6ie/ Shutterstock The Pressure Equipment Directive 2014/68/EU Photo: nostal6ie/ Shutterstock Information for our Customers and Partners. One objective of the EU single market is to ensure the smooth technical transfer of

More information

EA Procedure and Criteria for the Evaluation of Conformity Assessment Schemes by EA Accreditation Body Members

EA Procedure and Criteria for the Evaluation of Conformity Assessment Schemes by EA Accreditation Body Members Publication Reference EA-1/22 A-AB: 2014 EA Procedure and Criteria for the Evaluation of Conformity Assessment Schemes by EA PURPOSE This document contains the procedure and criteria to be applied by EA

More information

Regulation for Scheme Owners requesting acceptance by ACCREDIA of new Conformity Assessment Schemes and their revisions

Regulation for Scheme Owners requesting acceptance by ACCREDIA of new Conformity Assessment Schemes and their revisions Title Reference Regulation for Scheme Owners requesting acceptance by ACCREDIA of new Conformity Assessment Schemes and their revisions RG-19 Revision 00 Date 10-10-2017 NOTE: The present document represents

More information

Title Procedure for setting up the accreditation of new conformity assessment schemes

Title Procedure for setting up the accreditation of new conformity assessment schemes Title Procedure for setting up the accreditation of new conformity assessment schemes Reference PG-13-01 Revision 1 Date 09-04-2018 NOTE: The present document represents the English version of document

More information

IATF - International Automotive Task Force IATF 16949:2016 Sanctioned Interpretations

IATF - International Automotive Task Force IATF 16949:2016 Sanctioned Interpretations :2016 Sanctioned Interpretations 1 st Edition was published in October 2016 and was effective 1 January 2017. The following Sanctioned Interpretations were determined and approved by the IATF. Unless otherwise

More information

THE QUALITY INSTITUTIONS An enabling framework for international trade. Tom Rotherham International Institute for Sustainable Development (IISD)

THE QUALITY INSTITUTIONS An enabling framework for international trade. Tom Rotherham International Institute for Sustainable Development (IISD) THE QUALITY INSTITUTIONS An enabling framework for international trade Tom Rotherham International Institute for Sustainable Development (IISD) THE QUALITY INSTITUTIONS An enabling framework for international

More information

EA Procedure and Criteria. For the Evaluation of Conformity. Assessment Schemes by EA. Accreditation Body Members

EA Procedure and Criteria. For the Evaluation of Conformity. Assessment Schemes by EA. Accreditation Body Members Schemes by EA Accreditation Body Members Publication Reference EA-1/22 A: 2016 EA Procedure and Criteria For the Evaluation of Conformity Assessment Schemes by EA Accreditation Body Members PURPOSE This

More information

Application Note: this form shall only be used by applicants outside the European Economic Area (EEA)

Application Note: this form shall only be used by applicants outside the European Economic Area (EEA) (Will be filled-in by Deutsche Akkreditierungsstelle GmbH (DAkkS)) Case No.: Customer Manager: Incoming date/stamp: Deutsche Akkreditierungsstelle GmbH Central Application Processing (ZAB) Spittelmarkt

More information

Surveillance and CoP clearance

Surveillance and CoP clearance INFORMATION for MANUFACTURERS regarding: Surveillance and CoP clearance EC Directives and ECE Regulations Vehicle Category L, M, N, O, T, separate technical units, systems and components. INFORMATION for

More information

Standards and accreditation. Tools for delivering better regulation

Standards and accreditation. Tools for delivering better regulation Standards and accreditation Tools for delivering better regulation Introduction Standards and accreditation are marketbased tools that can be used by Government policy makers to deliver better regulation.

More information

IATF - International Automotive Task Force IATF 16949:2016 Sanctioned Interpretations

IATF - International Automotive Task Force IATF 16949:2016 Sanctioned Interpretations :2016 Sanctioned Interpretations 1 st Edition was published in October 2016 and was effective 1 January 2017. The following Sanctioned Interpretations were determined and approved by the IATF. Unless otherwise

More information

Conformity Assessment Facilitates Trades Development

Conformity Assessment Facilitates Trades Development Conformity Assessment Facilitates Trades Development SIRIM QAS International Bahrain Branch Office Basori Hj Selamat 30 th March 2017 Presentation Outline Challenges to facilitates trade Quality Infrastructure

More information

Model: Quadro mm. Height adjustable table 23 mm laminate on MDF steel frame. EN 527-2:2002 and EN 527-3:2002.

Model: Quadro mm. Height adjustable table 23 mm laminate on MDF steel frame. EN 527-2:2002 and EN 527-3:2002. Cube Design A/S Vadstedvej 212 DK-8450 Hammel Order no. 687480-4 Appendices 3 Test Report Material: Model: Quadro 5730 950 2000 mm Type: Materials: Height adjustable table 23 mm laminate on MDF steel frame

More information

IAF MLA Document. Guidance for the Exchange of Documentation among MLA Signatories for the Assessment of Conformity Assessment Bodies.

IAF MLA Document. Guidance for the Exchange of Documentation among MLA Signatories for the Assessment of Conformity Assessment Bodies. IAF MLA Document Guidance for the Exchange of Documentation among MLA Signatories for the Assessment of Conformity Assessment Bodies Issue 3 (IAF ML 1:2016) Issue 3 Guidance for the Exchange of Documentation

More information

A016 Traceability of measurement results compared to national and international measurement standards

A016 Traceability of measurement results compared to national and international measurement standards 08.04.2016 Version 08 Page 1 de 9 A016 Traceability of measurement results compared to national and international measurement standards Modifications: p 2 South Lane Tower I 1, avenue du Swing L-4367 Belvaux

More information

Joint EA - EDQM Communication regarding cooperation when carrying out (joint) audits/assessments in Official Medicines Control Laboratories

Joint EA - EDQM Communication regarding cooperation when carrying out (joint) audits/assessments in Official Medicines Control Laboratories Publication Reference EA-INF/15: 2017 Joint EA - EDQM Communication regarding cooperation when carrying out (joint) audits/assessments in Official Medicines Control Laboratories PURPOSE This publication

More information

CE marking is regarded as a passport for products to enter and circulate freely within the 30 counties forming part of the EEA.

CE marking is regarded as a passport for products to enter and circulate freely within the 30 counties forming part of the EEA. CE Marking Services What is CE Marking? Many products that are placed on the single market in the European Economic Area (EEA) (28 EU countries, together with Iceland, Liechtenstein and Norway) contain

More information

ILAC P10 TRACEABILITY

ILAC P10 TRACEABILITY ACTIVITY 1.3 TRAINING SESSION FOLLOWING THE FINDINGS FROM PREVIOUS ACTIVITIES: ILAC P10 TRACEABILITY Maria Pia Toni Slide 1 of XX REFERENCE ILAC P10:2013 ILAC Policy on the Traceability of Measurement

More information

Impact of the REACH Regulation (EC) n 1907/2006

Impact of the REACH Regulation (EC) n 1907/2006 Impact of the REACH Regulation (EC) n 1907/2006 Analysis of the consequences of REACH on the supply chain from the exporter s point of view. www.tuv.com/reach Introduction The REACH regulation came into

More information

IECEE-ILAC-IAF Guidance for the Conduct of Unified Assessments in the Electrotechnical Sector

IECEE-ILAC-IAF Guidance for the Conduct of Unified Assessments in the Electrotechnical Sector IECEE-ILAC-IAF Guidance for the Conduct of Unified Assessments in the Electrotechnical Sector 2016-04-145-01-26 Guidance for Unified Assessments THIS PUBLICATION IS COPYRIGHT PROTECTED Copyright IEC/IAF/ILAC

More information

ROLE OF THE APEC SPECIALIST REGIONAL BODIES ELEMENTS OF THE STANDARDS AND CONFORMANCE INFRASTRUCTURE

ROLE OF THE APEC SPECIALIST REGIONAL BODIES ELEMENTS OF THE STANDARDS AND CONFORMANCE INFRASTRUCTURE ROLE OF THE APEC SPECIALIST REGIONAL BODIES ELEMENTS OF THE STANDARDS AND CONFORMANCE INFRASTRUCTURE Why is the Standards and Conformance Infrastructure important? ~ Improves everyday life ~ Supports and

More information

IAF Mandatory Document. Accreditation Assessment of Conformity Assessment Bodies with Activities in Multiple Countries. Issue 2 IAF MD 12:2016

IAF Mandatory Document. Accreditation Assessment of Conformity Assessment Bodies with Activities in Multiple Countries. Issue 2 IAF MD 12:2016 IAF Mandatory Document Accreditation Assessment of Conformity Assessment Bodies with Activities in Multiple Countries Issue 2 IAF MD 12:2016 2016 Issue 2 Accreditation Assessment of Conformity Page 2 of

More information

National Quality Infrastructure: The Key to Philippine Industries Competitiveness

National Quality Infrastructure: The Key to Philippine Industries Competitiveness National Quality Infrastructure: The Key to Philippine Industries Competitiveness National Competitiveness Council Philippines AIM Conference Center 11 September 2014 Manila/ Philippines Dr.-Ing. Clemens

More information

IAF Mandatory Document

IAF Mandatory Document IAF-MD 11:2013 IAF Mandatory Document IAF MANDATORY DOCUMENT FOR THE APPLICATION OF ISO/IEC 17021 FOR AUDITS OF INTEGRATED MANAGEMENT SYSTEMS (IAF MD 11: 2013) Page 2 of 12 The (IAF) details criteria for

More information

Quality System ACCREDITATION For the Clinical Laboratories

Quality System ACCREDITATION For the Clinical Laboratories Quality System ACCREDITATION For the Clinical Laboratories A NEW PERSPECTIVE BY: Accreditation Commission For Conformity Assessment Bodies (ACCAB) 1 Objective What are Standards? Voluntary & Mandatory

More information

Calibration Technology Ltd

Calibration Technology Ltd Innovation Works, National Technology Park, Limerick. Calibration Laboratory Registration number: 186C is accredited by the Irish National Board (INAB) to undertake calibration as detailed in the Schedule

More information

Better Training for Safer Food Initiative

Better Training for Safer Food Initiative Better Training for Safer Food Initiative Inspection and certification of pesticide application equipment An introduction to EU legislative framework Prof. EMILIO GIL Universitat Politècnica de Catalunya

More information

TWINNING PROJECT FICHE

TWINNING PROJECT FICHE TWINNING PROJECT FICHE 1 BASIC INFORMATION 1.1 Programme: ENPI Action Programme 2008 for Ukraine 1.2 Twinning Number: UA10/ENP-PCA/TR/24 1.3 Title: Further development of National Accreditation Agency

More information

EURAMET and the Operation of NMIs. EURAMET Guide No. 1 Version 2.0 (01/2015)

EURAMET and the Operation of NMIs. EURAMET Guide No. 1 Version 2.0 (01/2015) EURAMET and the Operation of NMIs EURAMET Guide No. 1 Authorship and Imprint This document was developed by the EURAMET e.v. EURAMET e.v. Bundesallee 100 D-38116 Braunschweig Germany E-Mail: secretariat@euramet.org

More information

Medical Device Directive

Medical Device Directive Medical Device Directive WG9 - IEC/SC 62A ISO/TC 184/SC 2 Joint Working Group 9 Saeed Zahedi 4 th of July 2012 Blatchford Copyright 2012 Commercial in confidence Definition and Requirements MDD is law,

More information

Standards and accreditation. Tools for policy makers and regulators

Standards and accreditation. Tools for policy makers and regulators Standards and accreditation Tools for policy makers and regulators Introduction Standards and accreditation are market-based tools that can be used by Government policy makers and regulators to deliver

More information

SERDAR AKSOY FEDERAL GOVERNMENT OF THE SOMALI REPUBLIC GLOBAL HEAD OF FOREIGN TRADE & TRADE FACILITATION

SERDAR AKSOY FEDERAL GOVERNMENT OF THE SOMALI REPUBLIC GLOBAL HEAD OF FOREIGN TRADE & TRADE FACILITATION SERDAR AKSOY GLOBAL HEAD OF FOREIGN TRADE & TRADE FACILITATION FEDERAL GOVERNMENT OF THE SOMALI REPUBLIC 01.07.2015 New regulations Pre-Importation Inspection, Testing and Certification Program of Goods

More information

WELMEC Application of module D Quality assurance Under directive 2014/32/EU (MID) or directive 2014/31/EU (NAWID)

WELMEC Application of module D Quality assurance Under directive 2014/32/EU (MID) or directive 2014/31/EU (NAWID) WELMEC 8.4 2017 Application of module D Quality assurance Under directive 2014/32/EU (MID) or directive 2014/31/EU (NAWID) WELMEC is a cooperation between the legal metrology authorities of the Member

More information

CONFIRMATION. In accordance with TOV AUSTRIA AUTOMOTIVE procedures, is hereby certified that

CONFIRMATION. In accordance with TOV AUSTRIA AUTOMOTIVE procedures, is hereby certified that CONFIRMATION Management System with approval relevant requirements In accordance with TOV AUTOMOTIVE procedures, is hereby certified that Aluminum Precision Products, Inc. 3333 W. Warner Avenue Santa Ana,

More information

Quick Guide: Independent Verification in TCO Certified

Quick Guide: Independent Verification in TCO Certified Quick Guide: Independent Verification in TCO Certified TCO Certified is an international sustainability certification for IT products, making it easier for IT buyers, brand owners and manufacturers to

More information

COMPANY PROFILE IAS REGISTER AG. -Glocal Compliance Service- International Compliance & Coaching Academy

COMPANY PROFILE IAS REGISTER AG. -Glocal Compliance Service- International Compliance & Coaching Academy COMPANY PROFILE Certification Body Inspection Body International Compliance & Coaching Academy -Glocal Compliance Service- -GLOCAL COMPLIANCE SERVICE- 1. PRESENTATION The -Glocal Compliance Service- is

More information

Instruments of environmental policy

Instruments of environmental policy Instruments of environmental policy Instruments of environmental policies are related to methods, environmental legislation and administrative procedures developed with a view to reduce negative impacts

More information

EU Treaty Declaration (No 30) on WEU (Maastricht, 7 February 1992)

EU Treaty Declaration (No 30) on WEU (Maastricht, 7 February 1992) EU Treaty Declaration (No 30) on WEU (Maastricht, 7 February 1992) Caption: In this Declaration made at the Maastricht European Council of 9 and 10 December 1991 and annexed to the Final Act of the Treaty

More information

B C ISO/IEC INTERNATIONAL STANDARD. General criteria for the operation of various types of bodies performing inspection

B C ISO/IEC INTERNATIONAL STANDARD. General criteria for the operation of various types of bodies performing inspection INTERNATIONAL STANDARD ISO/IEC 17020 First edition 1998-11-15 General criteria for the operation of various types of bodies performing inspection Critères généraux pour le fonctionnement de différents

More information

June 21, 2011 (Tuesday)

June 21, 2011 (Tuesday) June 21, 2011 (Tuesday) 55 th EOQ Congress KEMPINSKI HOTEL CORVINUS Erzsébet tér 7-8, Budapest V. BALLROOM Tuesday 9:00 10:30 8.1. OPENING CEREMONY 9.00 Opening Ceremony Zacharias Bilalis, European Commission,

More information

Rules for accreditation of providers of proficiency testing/interlaboratory

Rules for accreditation of providers of proficiency testing/interlaboratory Rules for accreditation of providers of proficiency testing/interlaboratory tests Scope: With this regulation the requirements for accreditations of providers of proficiency testing/interlaboratory tests/ring

More information

IAF Mandatory Document IAF MANDATORY DOCUMENT FOR THE APPLICATION OF ISO/IEC FOR AUDITS OF INTEGRATED MANAGEMENT SYSTEMS

IAF Mandatory Document IAF MANDATORY DOCUMENT FOR THE APPLICATION OF ISO/IEC FOR AUDITS OF INTEGRATED MANAGEMENT SYSTEMS IAF Mandatory Document IAF MANDATORY DOCUMENT FOR THE APPLICATION OF ISO/IEC 17021-1 FOR AUDITS OF INTEGRATED MANAGEMENT SYSTEMS Issue 2 () Issued: 17 January 2019 Application Date: 17 January 2020 2019

More information

QAL3 methods for different measurement principles from the point of view of AMS manufacturers, test houses and plant operators

QAL3 methods for different measurement principles from the point of view of AMS manufacturers, test houses and plant operators QAL3 methods for different measurement principles from the point of view of AMS manufacturers, test houses and plant operators Mr. Guido Baum TÜV Rheinland Energie und Umwelt GmbH Am Grauen Stein, 51105

More information

REQUIREMENTS FOR ACCREDITATION OF INSPECTION BODIES

REQUIREMENTS FOR ACCREDITATION OF INSPECTION BODIES NATIONAL CENTRE FOR ACCREDITATION REQUIREMENTS FOR ACCREDITATION OF INSPECTION BODIES according to SM SR EN ISO/IEC 17020:2013 Code DR-OI-07 Edition 2 Page 1/15 Approved by Technical Certification Committee

More information

Equipment Certification and Importation Procedures Authentication of certificates and ensuring that approval requirements are met

Equipment Certification and Importation Procedures Authentication of certificates and ensuring that approval requirements are met Equipment Certification and Importation Procedures Authentication of certificates and ensuring that approval requirements are met Keith Mainwaring Ukrainian National Information Systems (UNIS) Tunis, 9

More information

IAF Informative Document For Management of Extraordinary Events or Circumstances Affecting ABs, CABs and Certified Organizations

IAF Informative Document For Management of Extraordinary Events or Circumstances Affecting ABs, CABs and Certified Organizations IAF ID 1:200X International Accreditation Forum, Inc. Page 1 of 10 IAF-TC-50-10 International Accreditation Forum, Inc. IAF Informative Document For Management of Extraordinary Events or Circumstances

More information

Equipment Certification and Importation Procedures Authentication of certificates and ensuring that approval requirements are met

Equipment Certification and Importation Procedures Authentication of certificates and ensuring that approval requirements are met Equipment Certification and Importation Procedures Authentication of certificates and ensuring that approval requirements are met Keith Mainwaring Ukrainian National Information Systems (UNIS) Trinidad

More information

1 RULES DESCRIPTION OF SERVICES Audit preparation Conduct of the audit Audit follow-up Certification...

1 RULES DESCRIPTION OF SERVICES Audit preparation Conduct of the audit Audit follow-up Certification... Description of the certification procedure ISO/TS 16949:2009 and IATF 16949:2016 Certific ation Table of contents 1 RULES... 2 2 DESCRIPTION OF SERVICES... 6 2.1 Audit preparation... 6 2.2 Conduct of the

More information

LA VERSION ELECTRONIQUE FAIT FOI

LA VERSION ELECTRONIQUE FAIT FOI International Forum, Inc. IAF Informative Document IAF Informative Document For QMS and EMS Scopes of Issue 2 (IAF ID 1: 2014) International Forum, Inc. 2014 International Forum, Inc. Issue 2 IAF Informative

More information

EA-7/04 Legal Compliance as a part of accredited ISO 14001: 2004 certification

EA-7/04 Legal Compliance as a part of accredited ISO 14001: 2004 certification Publication Reference EA-7/04 Legal Compliance as a part of Accredited ISO 14001: 2004 certification PURPOSE The text of this document has been produced by a working group in the European co-operation

More information

Metrology Systems & Services Ltd.

Metrology Systems & Services Ltd. Metrology Systems & Services Ltd. Coolagown, Fermoy, Co Cork Calibration Laboratory Registration number: 161C is accredited by the Irish National Board (INAB) to undertake calibration as detailed in the

More information

Supplement 1 to EA-2/13 EA Cross Border Accreditation Policy and Procedure for Cross Border Cooperation between EA Members

Supplement 1 to EA-2/13 EA Cross Border Accreditation Policy and Procedure for Cross Border Cooperation between EA Members Publication Reference EA-2/13 M S1: 2013 Supplement 1 to EA-2/13 EA Cross Border Accreditation Policy and Procedure for Cross Border Cooperation between EA Members Interpretation of terminology Used in

More information

RANGE OF SERVICES FUNCTIONAL SAFETY TRAINING PERSONAL QUALIFICATION CONSULTANCY SAFETY ANALYTICS TESTING CERTIFICATION

RANGE OF SERVICES FUNCTIONAL SAFETY TRAINING PERSONAL QUALIFICATION CONSULTANCY SAFETY ANALYTICS TESTING CERTIFICATION RANGE OF SERVICES FUNCTIONAL SAFETY TRAINING PERSONAL QUALIFICATION CONSULTANCY SAFETY ANALYTICS TESTING CERTIFICATION PROFIT FROM THE NAME AND KNOW-HOW OF THE WORLD S LEADING PROVIDER OF TESTING SERVICES,

More information

Tensile Testing Services Ltd.

Tensile Testing Services Ltd. Tensile Testing Services Ltd. Unit B1, Smithstown Industrial Estate, Shannon, Co. Clare Testing Laboratory Registration number: 276T is accredited by the Irish National Board (INAB) to undertake testing

More information

The Reply of Egypt to comments submitted by the European Union On notifications G/TBT/N/EGY/114 and G/TBT/N/EGY/115

The Reply of Egypt to comments submitted by the European Union On notifications G/TBT/N/EGY/114 and G/TBT/N/EGY/115 The Reply of Egypt to comments submitted by the European Union On notifications G/TBT/N/EGY/114 and G/TBT/N/EGY/115 In relation to the European Union s comments on Ministerial Decrees no.43/2016 and no.

More information

EA Guidance on Accreditation of Pesticide Residues Analysis in Food and Feed

EA Guidance on Accreditation of Pesticide Residues Analysis in Food and Feed Publication Reference EA-4/22 G: 2018 EA Guidance on Accreditation of Pesticide Residues Analysis in Food and Feed PURPOSE This paper provides guidance to develop harmonized accreditation of Pesticide

More information

The role of accreditation bodies and EQA organisers in the. specifications

The role of accreditation bodies and EQA organisers in the. specifications The role of accreditation bodies and EQA organisers in the assessment of analytical quality specifications Ian Mann Swiss Accreditation Service ian.mann@sas.ch Content Important partners and aspects of

More information

List of Conclusions and Resolutions agreed at the 33 rd Meeting of the EA Advisory Board held on 22 October 2014

List of Conclusions and Resolutions agreed at the 33 rd Meeting of the EA Advisory Board held on 22 October 2014 EAAB(14)M33_CRL List of Conclusions and Resolutions agreed at the 33 rd Meeting of the EA Advisory Board held on 22 October 2014 Agenda Item 3 - Key topics for discussion Agenda Item 3.1 - Cases of deviation

More information

Requirements for the acceptance of quality systems by the Netherlands Food and Consumer Product Safety Authority (NVWA)

Requirements for the acceptance of quality systems by the Netherlands Food and Consumer Product Safety Authority (NVWA) Requirements for the acceptance of quality systems by the Netherlands Food and Consumer Product Safety Authority (NVWA) NVWA, adopted 4 June 2014 Introduction As the government must make sure there is

More information

Inter American Accreditation Cooperation IAAC APPLICATION FOR THE ASSESSMENT AND ACCREDITATION OF PROFICIENCY TESTING PROVIDERS

Inter American Accreditation Cooperation IAAC APPLICATION FOR THE ASSESSMENT AND ACCREDITATION OF PROFICIENCY TESTING PROVIDERS IAAC APPLICATION FOR THE ASSESSMENT AND ACCREDITATION OF PROFICIENCY TESTING PROVIDERS CLASSIFICATION This document is classified as an IAAC Mandatory Document AUTHORIZATION Issue Nº: 01 Prepared by: Laboratories

More information

IAF Informative Document for QMS Scopes of Accreditation

IAF Informative Document for QMS Scopes of Accreditation IAF ID 1:2010 International Accreditation Forum, Inc. IAF Informative Document IAF Informative Document for QMS Scopes of Accreditation (IAF ID 1:2010) IAF ID 1:2010 International Accreditation Forum,

More information

Legal aspects of UK and European Decontamination Standards

Legal aspects of UK and European Decontamination Standards Legal aspects of UK and European Decontamination Standards Rob Turpin BSI Healthcare Market Development Manager Scottish Health and Social Care Facilities Conference 4 th November 2016 1 BSI Key Facts

More information

YOUR CERTIFICATION PROCESS EXPLAINED

YOUR CERTIFICATION PROCESS EXPLAINED ISO 22000 FOOD SAFETY MANAGEMENT SYSTEMS FSSC 22000 FOOD SAFETY SYSTEM CERTIFICATION This document outlines the audit process for the above referenced standard. It outlines the stages to audit and gives

More information

PROACTIVE APPROACHES. for QUALITY MANAGEMENT. Anabela Martins Micoteca da Universidade do Minho

PROACTIVE APPROACHES. for QUALITY MANAGEMENT. Anabela Martins Micoteca da Universidade do Minho PROACTIVE APPROACHES for QUALITY MANAGEMENT Anabela Martins Micoteca da Universidade do Minho 1 Standard development procedure Reference sources Structure Interpreting the provisions Recognition scheme

More information

Assess record for 'Disclosure of Non-Financial Information by Companies'

Assess record for 'Disclosure of Non-Financial Information by Companies' Page 1 of 5 Assess record for 'Disclosure of Non-Financial Information by Companies' Meta Informations Creation date 27-01-2011 Last update date User name null Case Number 165727346311602711 Invitation

More information

ISO 9001:2000 What does it mean in the supply chain?

ISO 9001:2000 What does it mean in the supply chain? ISO 9001:2000 What does it mean in the supply chain? What is ISO 9001:2000? ISO 9001:2000 is an international standard that gives requirements for an organization s Quality Management System ( QMS ). It

More information

The Third-Party Process: Waste of Resources or Added Value?

The Third-Party Process: Waste of Resources or Added Value? The Third-Party Process: Waste of Resources or Added Value? Discussing accredited certification at a cocktail party isn t likely to make you the center of attention. But depending on where you work, you

More information

Addendum No. 1 to the CSTBat Certification Reference System: Connection hoses

Addendum No. 1 to the CSTBat Certification Reference System: Connection hoses CERTIFICATION Addendum No. 1 to the CSTBat Certification Reference System: Connection hoses Identification No.: QB 10 Addendum No. 1, approved by the CSTB Technical Management on: 02/08/2016 Application

More information

QUALITY MANAGEMENT SYSTEMS IN SMALL AND MEDIUM MECHANICAL ENGINEERING ENTERPRISES IN LATVIA

QUALITY MANAGEMENT SYSTEMS IN SMALL AND MEDIUM MECHANICAL ENGINEERING ENTERPRISES IN LATVIA International Journal of Automotive and Mechanical Engineering (IJAME) ISSN: 2229-8649 (Print); ISSN: 2180-1606 (Online); Volume 10, pp. 1928-1934, July-December 2014 Universiti Malaysia Pahang DOI: http://dx.doi.org/10.15282/ijame.10.2014.10.0161

More information

IAF Mandatory Document. for the Audit and Certification of a Management System Operated by a Multi-Site Organization (IAF MD 1:2018)

IAF Mandatory Document. for the Audit and Certification of a Management System Operated by a Multi-Site Organization (IAF MD 1:2018) IAF Mandatory Document IAF Mandatory Document for the Audit and Certification of a Management System Operated by a Multi-Site Organization Issue 2 (IAF MD 1:2018) Issued: 29 January 2018 Application Date:

More information

Conformity assessment systems and schemes for accessibility requirements

Conformity assessment systems and schemes for accessibility requirements BT WG 185 eaccessibility BT WG 101-5 Usability and safety of electrical products with reference to people with special needs Conformity assessment systems and schemes for accessibility requirements CEN

More information

Recognized Experts. Competence Area

Recognized Experts. Competence Area 1(4) Recognized Experts Competence Area This memo concerns the content of detailed instructions for the evaluation and approval of recognized experts in accordance with section 48, subsection 2 of the

More information

COMPLEMENT. RoHS PRODUCTS. Prepared by: Karin Medeiros Verified by: Natália Silva. Approved by: Mariano Mercado Approval Date: 15/01/2016

COMPLEMENT. RoHS PRODUCTS. Prepared by: Karin Medeiros Verified by: Natália Silva. Approved by: Mariano Mercado Approval Date: 15/01/2016 Page: 1/5 Prepared by: Karin Medeiros Verified by: Natália Silva Approved by: Mariano Mercado Approval Date: 15/01/2016 1. OBJECTIVE This document presents the complementary criteria of Product Certification

More information

The Impact of Transportation Networks on Trade and Tourism

The Impact of Transportation Networks on Trade and Tourism The Impact of Transportation Networks on Trade and Tourism Izmir, Republic of Turkey 7-8 June 2011 Talal Al-Wahaibi IRU Project Officer International Road Transport Union (IRU) 2010 This is the IRU Evolution

More information

Preparation Approval Authorisation Application date. Directive Council The President

Preparation Approval Authorisation Application date. Directive Council The President Title Proficiency Testing Reference RT-24 Revision 02 Date 2015-10-27 NOTE: The present document represent the English version of document under reference at the specified revision. In case of conflict

More information

WELMEC European cooperation in legal metrology

WELMEC European cooperation in legal metrology WELMEC 8.6 Issue 1 WELMEC European cooperation in legal metrology Measuring Instruments Directive 2004/22/EC Presumption of Conformity of the Quality System of Manufacturers with Module D or H 1 when EN

More information

Green Product Mark Certification Scheme

Green Product Mark Certification Scheme Green Product Mark Certification Scheme www.tuv.com FOREWORD Product environmental labels are claims regarding the environmental impact of a product. They provide information about the product s overall

More information

ENHANCEMENT OF THE BUSINESS ENVIRONMENT IN THE SOUTHERN MEDITERRANEAN

ENHANCEMENT OF THE BUSINESS ENVIRONMENT IN THE SOUTHERN MEDITERRANEAN ENHANCEMENT OF THE BUSINESS ENVIRONMENT IN THE SOUTHERN MEDITERRANEAN Product standards and their impact on trade Fadi Fayad Beirut 10.10.14 2 Introduction What is a standard? A standard can be defined

More information

Synergy Health Ireland Ltd.

Synergy Health Ireland Ltd. IDA Business & Technology Park, Tullamore, Co.Offaly Testing Laboratory Registration number: 164T is accredited by the Irish National Board (INAB) to undertake testing as detailed in the Schedule bearing

More information

Belgium-Brussels: HOME/2015/ISFP/PR/DRUG/0062 Waste water analysis report on the stimulant illicit drug markets in the EU 2016/S

Belgium-Brussels: HOME/2015/ISFP/PR/DRUG/0062 Waste water analysis report on the stimulant illicit drug markets in the EU 2016/S 1 / 6 This notice in TED website: http://ted.europa.eu/udl?uri=ted:notice:254272-2016:text:en:html Belgium-Brussels: HOME/2015/ISFP/PR/DRUG/0062 Waste water analysis report on the stimulant illicit drug

More information

Regulations Regarding the Energy Efficiency Monitoring and Applicable Energy Management System Standard

Regulations Regarding the Energy Efficiency Monitoring and Applicable Energy Management System Standard Republic of Latvia Cabinet Regulation No. 668 Adopted 11 October 2016 Regulations Regarding the Energy Efficiency Monitoring and Applicable Energy Management System Standard Issued pursuant to Section

More information

CG Power Systems Ireland

CG Power Systems Ireland CG Power Systems Ireland Dublin Road, Cavan, Ireland Testing Laboratory Registration number: 269T is accredited by the Irish National Board (INAB) to undertake testing as detailed in the Schedule bearing

More information

ISO/IEC INTERNATIONAL STANDARD. Conformity assessment General requirements for accreditation bodies accrediting conformity assessment bodies

ISO/IEC INTERNATIONAL STANDARD. Conformity assessment General requirements for accreditation bodies accrediting conformity assessment bodies INTERNATIONAL STANDARD ISO/IEC 17011 First edition 2004-09-01 Conformity assessment General requirements for accreditation bodies accrediting conformity assessment bodies Évaluation de la conformité Exigences

More information

Environmental Aspects - Gaining Control by Environmental Assurance

Environmental Aspects - Gaining Control by Environmental Assurance Environmental Aspects - Gaining Control by Environmental Assurance Dr. Rainer Feld BSI Copyright 2014 BSI. All rights reserved. Who is BSI Leading Global Standards Creation Body: British, European, ISO,

More information

Med-Info. Introduction to Korean medical device regulations. TÜV SÜD Product Service GmbH

Med-Info. Introduction to Korean medical device regulations. TÜV SÜD Product Service GmbH Med-Info International expert information for the medical device industry Introduction to Korean medical device regulations The Ministry of Food and Drug Safety () is the healthcare agency having overall

More information

ACEA Position Paper Monitoring and reporting CO2 emissions and fuel consumption of new heavy-duty vehicles

ACEA Position Paper Monitoring and reporting CO2 emissions and fuel consumption of new heavy-duty vehicles ACEA Position Paper Monitoring and reporting CO2 emissions and fuel consumption of new heavy-duty vehicles November 2017 INTRODUCTION The European Automobile Manufacturers Association (ACEA) welcomes the

More information

1 Preface Introduction... 13

1 Preface Introduction... 13 1 Preface... 11 2 Introduction... 13 3 Legal Requirements... 15 3.1 Approach to determining the legal implications... 15 3.2 Software as a medical device... 17 3.2.1 Intended purpose... 18 3.2.2 Normal

More information

BUILDING TECHNICAL INFRASTRUCTURES TO SUPPORT SUSTAINABLE DEVELOPMENT AND TRADE DCMAS NETWORK BACKGROUND PAPER CONTENTS. BULLETIN No.80/2010/REV.

BUILDING TECHNICAL INFRASTRUCTURES TO SUPPORT SUSTAINABLE DEVELOPMENT AND TRADE DCMAS NETWORK BACKGROUND PAPER CONTENTS. BULLETIN No.80/2010/REV. BULLETIN No.80/2010/REV.1 BUILDING TECHNICAL INFRASTRUCTURES TO SUPPORT SUSTAINABLE DEVELOPMENT AND TRADE DCMAS NETWORK BACKGROUND PAPER CONTENTS - INTRODUCTION - DCMAS NETWORK - AN INTEGRATED APPROACH

More information

Contents. Regulatory Bodies... 13

Contents. Regulatory Bodies... 13 Contents UNITED STATES... 3 Regulatory Bodies... 3 Product Classification and Regulatory Control... 3 Application Documents... 3 Quality System Requirements... 4 Product and Manufacturer s License... 4

More information

Technical documentation in the new MDR. Gabriele Catignoli, Andreas Purde

Technical documentation in the new MDR. Gabriele Catignoli, Andreas Purde Technical documentation in the new MDR Annex I/II Gabriele Catignoli, Andreas Purde TÜV SÜD Product Service GmbH Slide 1 MDR Annex I, II 1 Core changes, Essential Requirements 2 Role of Common Specifications

More information

Nuclear Quality Standard Association

Nuclear Quality Standard Association Nuclear Quality Standard Association General information about Quality Management System in the nuclear industry This document is the property of NQSA Its copying, use or communication is subject to prior

More information

Course Title ID Duration Basic Premium. Biological Evaluation of Medical Devices: A Risk-Based Approach N mins

Course Title ID Duration Basic Premium. Biological Evaluation of Medical Devices: A Risk-Based Approach N mins Pre-Clinical Basic Level : CMDA Certified Medical Device Associate Biological Evaluation of Medical Devices: A Risk-Based Approach N134 63 mins 186.00 144.00 Introduction to Process Validation N135 75

More information

PASS4TEST IT 인증시험덤프전문사이트

PASS4TEST IT 인증시험덤프전문사이트 PASS4TEST IT 인증시험덤프전문사이트 http://www.pass4test.net 일년동안무료업데이트 Exam : ISO20KF Title : ISO / IEC 20000 Foundation Vendors : EXIN Version : DEMO Get Latest & Valid ISO20KF Exam's Question and Answers from

More information

> 50 YEARS OF EXPERIENCE > 12,500 EMPLOYEES A NEW PATH TO GROWTH TRANSPORTATION SYSTEMS SOFTWARE SAFETY GLOBAL ENGINEERING SERVICES

> 50 YEARS OF EXPERIENCE > 12,500 EMPLOYEES A NEW PATH TO GROWTH TRANSPORTATION SYSTEMS SOFTWARE SAFETY GLOBAL ENGINEERING SERVICES IN > 20 COUNTRIES > 50 YEARS OF EXPERIENCE > 12,500 EMPLOYEES INTERNATIONAL NETWORK OF EXPERTISE A NEW PATH TO GROWTH WWW.ASSYSTEM-GERMANY.COM TRANSPORTATION SYSTEMS SOFTWARE SAFETY GLOBAL ENGINEERING

More information

AWS Glossary of Terms

AWS Glossary of Terms AWS Glossary of Terms Version 1.0 July, 2015 2015 Alliance for Water Stewardship Inc. Purpose The purpose of this document is to define the terms, abbreviations and acronyms used by AWS. Responsibility

More information