Seamless Integration of ASTM E2500, Annex 15, FDA Process Validation Guideline and Chinese GMP in Large CapEx Project in China Daniel Nilsson
|
|
- Annabel Goodwin
- 6 years ago
- Views:
Transcription
1 Seamless Integration of ASTM E2500, Annex 15, FDA Process Validation Guideline and Chinese GMP in Large CapEx Project in China Daniel Nilsson Senior Management Consultant
2 Agenda Introduction A state-of the-art compliant life-cycle model for Process Validation Case Study: Implementation Process Validation Guidelines in China Considerations: the new Chinese GMP FDA Process Validation Guideline EU GMP Annex 15 Qualification and Validation ASTM E2500 Cultural advantages and challenges in managing projects in China The management and leadership aspects of a risk-based approach Predictions and conclusion
3 China Is Learning Fast: A New Approach to Design and Validation is Needed Incapable processes lead to high cost of quality lead to low margins and/or high consumer prices With global competition, it is not sustainable to allow low process capability Leading manufacturers in China do not look back, they want to implement world class performance from the start Pharma Auto Ref. PWC 2001 Sigma ppm Defects Yield Cost of Quality 2σ % 25-35% 3σ % 20-25% 4σ % 12-18% 5σ % 4-8% 6σ % 1-3%
4 A New Approach to Compliance From Process Design throughout Continued Process Verification Process Design Verification Process Qualification Facility Design and Equipment Qualification Process Performance Qualification (PV) To market Continued Process Verification In control References: FDA Process Validation: General Principles and Practices, EMA Guidelines for GMP Annex 15 (draft issued February 2014)
5 Integrate the following guidelines and GMPs: ICH Q8 Pharmaceutical Development ICH Q9 Quality Risk Management ICH Q10 Pharmaceutical Quality Systems Chinese GMP Challenge Annex 15 EU GMP Qualification and Validation US GMP and FDA Process Validation Guideline Align the execution of a large CapEx project for a biotech facility in China with the resulting life cycle model Manage the change Anchor the change
6 The Extended V-model
7 Initial GMP Risk Assessment and Control Strategy
8 Facility and Equipment Design and Verification
9 Process Validation/Process Performance Qualification
10 During Operations
11 Seamless Integration
12 Production of monoclonal antibodies Case Study Biotech API, purification, formulation, fill and finish Quality by design approach implemented since 2012 Fully integrated from Process Development through commissioning, qualification and process validation Creates shared values and allows the company to work together in a cross-functional way, instead of silo structure Reduced time for validation. A fully risk-based approach was used to identify critical areas Domestic company looking to export to EU and the US
13 Case Study: Risk Identification Equipment Process People Control of CQAs Process Design SOPs Control of CPPs Material Attributes Raw materials Excipients Identification of critical systems and CPPs QC Methods Environmental control Facility design Training Establish and enforce QMS Affect CQAs? Utilities Materials Environment Management 13
14 Case Study: Risk Identification Example: For identification of risk scenarios related to equipment, specifically how equipment could fail to deliver desired control of CPPs and CQAs, Risk Breakdown Structures were used to harmonize the quality of the risk assessments and GMP Risk Control Strategies
15 Case Study: Control Strategies Risk Scenario Aseptic environment by batch start to ensure growth of the target cells (almost all other micro organisms will grow faster than CHO) Agitation in order to ensure even temperature & ph distribution without destroying product Control Strategy Qualification Verify material of construction, installation verification (surface finish, dead legs), sprayball coverage and cleaning/sterilization efficiency Installation verification, check operating parameters of agitator, temperature distribution verification Continued Process Verification/ Routine Manufacturing Sampling and evaluation of each batch. Monitor capability of process. Procedures for cleaning and preventive maintenance Procedure for preventive maintenance Control of CPPs is required (time, temp, ph) Correct information of the batch conditions must be displayed to the operator Installation verification (I/O and loop checks), design space verification Installation verification (hardware and software), sequence of operation verification Monitor CPPs in-line. Evaluate trends and adjust settings within design space Calibration program covering all instruments. Procedures for operators and preventive maintenance
16 Case Study: Control Strategies URS Req. No. URS Req. Description Critical Process URS Design/Function Parameters Design/Function / Design/Function Attribute IQ Protocol Test No. OQ Protocol Test No. Doc. Name Critical Quality Doc. No. Doc. Rev. No. (C, N, I) Attributes (CPP, CQA) Design/Function Doc. Ref. Description Verified in DQ Yes/No Material of construction shall be 316L Material Equipment of and Piping Stainless Construction C Steel Report CQA: Materials Bioassay PHD21-04-MR-01 N/A 1 Material certificate stainless steel for all parts in product contact. Verification Bioreactor 04 The temperature in the jacket shall be heated or allowed to cool to meet the following requirements: * from 20 C up to 37 C within 30 min, N/A achieving a stable temperature at 37± 0.5 C within 40 min * from 121 C down to 20 C within 60 min Equipment Temperature Mapping CPP: Bioreactor C 04 FS PHD21-04-FS-01 Verification 1 Temperature Sequence of Operation Verification Functional specification Yes, doc ID: CN2880-T Yes, doc ID: CN2880-T Agitators shall be mounted at bottom of vessel. The speed shall be variable. GA Bioreactor 04 PHD21-04-GA-01 1 Installation drawing CQA: Bioassay Sequence of Operation Piping and CPP: Component Functional Bioreactor C 04 FS PHD21-04-FS-01 Verification 1 Installation Verification Temperature, specification ph Component Agitator 210XS series PHD21-04-DS-09 2 datasheet Yes, doc ID: CN2880-T Yes, doc ID: CN2880-T Yes, doc ID: CN2880-T
17 Cultural Advantages and Challenges in Establishing a Corporate Quality Culture in China Opportunities Change Management is much easier than in Western Countries As long as processes are clearly defined, end results are excellent Strong education system Low cost A lot of human resources Challenges No quality culture like Japan Lack of creativity due to corporate culture Weak understanding of Line - and Project Management responsibilities Belief that responsibility for qualification and GMP compliance can be outsourced Personals relationships ( guanxi )
18 Opportunity: Create the Motivated Quality Organization A risk-based approach delivers important aspects to the creation of the motivated* organization: - Purpose. Risk-based makes it clear why we do the acitivities what we need to do. - Mastery. Risk-based provides the tools needed to channel our expertise and realize the truly process oriented pharmaceutical quality system - Autonomy. Once we create control strategies that add true value, we can allow for more autonomy Autonomy Mastery Purpose According to Drive by Daniel H Pink
19 Conclusions Chinese leading manufacturers understand both the regulatory and business drivers behind the QbD approach Chinese companies manage change better than Western companies There are already Chinese companies that have fully implemented QbD China is implementing GMP at level with EU, and in the future Chinese drug development and manufacturing will be at level or above EU China has issues with management, leadership, innovation and creativity that is holding them back- for now Any organization would benefit from going risk-based, since it breaks up the silo structures between R&D, Process Development, Project, and Operations
20 Thank you for your attention! Questions?
Latino America Consultores Innovation & Technology to make your Business Compliant
Latino America Consultores Innovation & Technology to make your Business Compliant Annex 15 & EMA Process Validation Guide Line 1 Changes in Requirements The Pharmaceutical Industry has adapted its business
More informationValidation An International Perspective
Validation An International Perspective Agenda Perceived industry problems - From QTPP/PQA Process Validation Paradigm shifts Process Validation based on QbD, Design Space, etc. Incremental changes Plain
More informationPROCESS VALIDATION ROCHAPON WACHAROTAYANKUN, PH.D.
Basic GMP Requirement PROCESS VALIDATION ROCHAPON WACHAROTAYANKUN, PH.D. Topic Process validation What and Why? Principle of process validation Manufacturing process validation Aseptic process validation
More informationSCIENCE AND RISK BASED APPROACH TO THE PROCESS VALIDATION LINK FROM QUALITY BY DESIGN TO PROCESS VALIDATION.
IJPSR (2016), Vol. 7, Issue 3 (Review Article) Received on 09 September, 2015; received in revised form, 15 December, 2015; accepted, 05 February, 2016; published 01 March, 2016 SCIENCE AND RISK BASED
More informationSince Annex 15 is not intended to cover APIs therefore the reference to ICH Q 11 does not make sense. (see comment 1) Expert Group May 2014
EU-GMP ANNEX 15 "Draft of 06.02.2014 - COMMENTS of the German Expert Group 10 "Qualification/Validation" Comment sent to ADM-GMDP@ema.europa.eu and sanco-pharmaceuticals-d6@ec.europa.eu by End of May 2014
More informationPROCESS VALIDATION ANSM 2015 FDA 2011
PROCESS VALIDATION ANSM 2015 FDA 2011 PBE-Expert Inc CANADA Training Company Agreement CPMT #0059104 Qualified Consultant At the measure 2 of the Levier Program PBE, Training Company Agreement CPMT #0059104
More informationGAMP 4/5 Prospective / retrospective Qualification of water treatment plants) P. Dony
GAMP 4/5 Prospective / retrospective Qualification of water treatment plants) P. Dony 31.03.2008 Table of contents Slide 2 1. GAMP 4 and GAMP 5 differences 2. CHRIST prospective Qualification strategy
More informationDrug Quality Assurance: Systems at ChemCon Author: Dr. Peter Gockel
Drug Quality Assurance: Systems at ChemCon Author: Dr. Peter Gockel On February 13th, 2006, the FOOD AND DRUG ADMINISTRATION (FDA) implemented a revision to the Compliance Program Guidance Manual for active
More informationImpacto de las Nuevas Tendencias Regulatorias en la Producción de Parenterales
Impacto de las Nuevas Tendencias Regulatorias en la Producción de Parenterales Empaques Primarios y Tendencias Farmaceuticas para Inyectables 1 International Support Support in R&D Technology Transfer
More informationPMDA Perspective: Regulatory Updates on Process Validation Standard
CMC Strategy Forum Japan 2014 Tokyo, Japan, December 8-9, 2014 PMDA Perspective: Regulatory Updates on Validation Standard Kazunobu Oyama, PhD Office of Cellular and Tissue-based Products PMDA, Japan Disclaimer:
More informationGuidance for Industry
Guidance for Industry Q8, Q9, and Q10 Questions and Answers U.S. Department of Health and Human Services Food and Drug Administration Center for Drug Evaluation and Research (CDER) Center for Biologics
More informationEFFECTIVE MANAGEMENT OF THE PROCESS VALIDATION LIFECYCLE VALIDATION MASTER PLAN DEVELOPMENT
EFFECTIVE MANAGEMENT OF THE PROCESS VALIDATION LIFECYCLE VALIDATION MASTER PLAN DEVELOPMENT Paul L. Pluta, PhD Journal of Validation Technology Journal of GXP Compliance University of Illinois at Chicago
More informationFDA Quality Metrics, Data Integrity and Application of Statistics Throughout Process Validation in a Global Economy
CBI Statistics in Validation FDA Quality Metrics, Data Integrity and Application of Statistics Throughout Process Validation in a Global Economy Jerry Lanese Ph.D. The Lanese Group, Inc. 2017 The Lanese
More informationMASTER PLANNING FOR VALIDATION
MASTER PLANNING FOR VALIDATION By: Gamal Amer, Ph.D. Principal, Premier Compliance Services, Inc. 1 Process Validation: General Principles and Practices Guidance to industry issued by the FDA in January
More informationValidation. An Easy to Understand Guide Validating Purified Water Systems
Validation Overview Validation Documentation Validation Activities Validation Mistakes Validation Protocols Test Selection Common Verifications When to test Test Layout and Content Validation Protocol
More informationImpacto de las Nuevas Tendencias Regulatorias en la Producción de Parenterales. Innovacion en Packaging Primario
Impacto de las Nuevas Tendencias Regulatorias en la Producción de Parenterales Innovacion en Packaging Primario 1 Contents Company Highlight What s Changing in Pharma Pharma Trends Harmonisation New Requirements
More informationCurrent Regulatory Considerations and Challenges for Continuous Manufacturing of Pharmaceuticals
15th DIA Japan Annual Meeting 2018 Promoting Better Collaboration to Drive Global Health and Innovation in an Era of Medical and Scientific Transformation November 11-13, 2018 Tokyo Big Sight V5-S3 Current
More informationPharmaceutical Reference Standards: Overview and Role in Global Harmonization
Matthew Borer, Ph.D., Advisor Pharmaceutical Reference Standards: Overview and Role in Global Harmonization 3rd DIA China Annual Meeting Beijing, China, 16-18 May, 2011 What is a Pharmaceutical Reference
More informationBFS IOA BFS Training 2018 Kunming Qualification and Validation of a BFS-Installation including CIP/SIP
Qualification and Validation of a BFS-Installation including CIP/SIP Presented by Christoph Bohn and Stefan Kiesel Director Rommelag Pharma Service Senior Manager Rommelag Pharma Service Coyright BFS IOA
More informationScientific & Risk Based Compliance
www.qualitybydesign.es Scientific & Risk Based Compliance QbD Pharmaceutical Services S.L About us Mission Flexibility QbD Pharmaceutical Services S.L delivers high added-value services and specialised
More informationSESSION 14. Documentation Requirements and Management for Validation. 30 March Frits Vogt
Validation Services SESSION 14 Documentation Requirements and Management for Validation 30 March 2017 Frits Vogt fritsvogt@valserv.nl Content Documentation Requirements and Management for Validation I.
More informationThe long anticipated draft of the FDA s
This article provides an overview of the draft guidance, the key changes in relation to the 1987 guidance, and reviews its potential impact on the current industry approaches to science- and risk-based
More informationRisk-based Approach to Part 11 and GxP Compliance
Welcome to our E-Seminar: Risk-based Approach to Part 11 and GxP Compliance 1 Intro Common Discussion Q: Do I really need to do this? Possible Answers A: Of course! (QA) B: Who cares, I have work to do!
More informationValidation of Pharmaceutical Manufacturing Process Focus: APIs.
Validation of Pharmaceutical Manufacturing Process Focus: APIs Validations: Regulatory History (US FDA) Sterilisation 1977 Aseptic processing 1979 Water Systems 1981 Non-sterile Mfg Process 1987 Revised
More informationCUSTOMER AND SUPPLIER ROLES AND RESPONSIBILITIES FOR 21 CFR 11 COMPLIANCE ASSESSMENT. 21 CFR Part 11 FAQ. (Frequently Asked Questions)
21 CFR Part 11 FAQ (Frequently Asked Questions) Customer and Supplier Roles and Responsibilities for Assessment of METTLER TOLEDO STARe Software Version 16.00, including: - 21 CFR 11 Compliance software
More informationImplement Effective Computer System Validation. Noelia Ortiz, MME, CSSGB, CQA
Implement Effective Computer System Validation Noelia Ortiz, MME, CSSGB, CQA Session Outline 1 2 3 4 5 Understanding Regulations and Guidelines Pertaining to Computer Systems Integrate SDLC and GAMP 5
More informationOverview of Amgen s CQP Commissioning and Qualification Program Steve Wisniewski Principal Compliance Consultant, CAI Past Chairman ISPE C&Q COP
May 1-3, 2012 Javits Center New York, NY Introduction to ISPE GUIDE: SCIENCE AND RISK-BASED APPROACH FOR THE DELIVERY OF FACILITIES, SYSTEMS, AND EQUIPMENT & Overview of Amgen s CQP Commissioning and Qualification
More informationInspection. Implementation of ICH Q8, Q9, Q10
Implementation of ICH Q8, Q9, Q10 International Conference on Harmonisation of Technical Requirements for Registration of Pharmaceuticals for Human Use Outline Aim of - as a key part of the regulatory
More informationProcess Validation Guidelines. Report highlights 23 rd February 2018
Process Validation Guidelines Report highlights 23 rd February 2018 Process validation is an important element of pharmaceutical quality system An effective system provides assurance of the continued capability
More informationProcess development and basic GMP
Process development and basic GMP Aulton Chapter 45, handouts Specification, stability, inprocess controls and validation Product development Process development Critical Product Qualities issues Critical
More informationGMP Challenges to Global Pharma Companies
GMP Challenges to Global Pharma Companies Muralidhara B. Gavini, Ph.D. Senior Assistant Country Director India Mumbai Office, Office of International Programs Office of the Commissioner Food & Drug Administration
More informationTHE PACMP STRATEGY. March 13-16, 2018
THE PACMP STRATEGY FDA/Xavier PharmaLink Conference 2018 March 13-16, 2018 Ajay Pazhayattil, Director- Pharmaceutical Development, AvacaPharma Inc., Vienna, VA ajay.pazhayattil@avacapharma.com PACMP ICH
More informationICH Q11 Development & manufacture of drug substances
ICH Q11 Development & manufacture of drug substances Keith McDonald Group Manager Medicines & Healthcare products Regulatory Agency (UK) 2011 ICH International Conference on Harmonisation of Technical
More informationGuidelines for Process Validation of Pharmaceutical Dosage Forms
Guidelines for Process Validation of Pharmaceutical Dosage Forms Version 2.1 Date issued 21/02/2010 Date of implementation 21/05/2010 31 August 2010 Page 1 of 20 Guidelines for Process Validation of Pharmaceutical
More informationCOMPLIANCE WITH EU ANNEX 15: VALIDATION AND QUALIFICATION
COMPLIANCE WITH EU ANNEX 15: VALIDATION AND QUALIFICATION Paul L. Pluta, PhD Journal of Validation Technology Journal of GXP Compliance University of Illinois at Chicago (UIC) College of Pharmacy, Chicago,
More informationQuality Assessment & GMP Similarities & Differences
Quality Assessment & GMP Similarities & Differences EMEA, Monday 26 th October 2009 Cormac Dalton Inspector Irish Medicines Board Date 12-Oct-09 Slide 1 Content Overview of commonalities & differences
More informationValidation Boot Camp. Validation Fundamentals: Conducting a Successful Validation Project
Validation Boot Camp Validation Fundamentals: Conducting a Successful Validation Project Learning Objectives Upon completion of this workshop, participants will be able to: Understand FDA and GMP terms
More informationEurope s new approach to assurance of API quality and its implications for manufacturers and producing countries
Europe s new approach to assurance of API quality and its implications for manufacturers and producing countries IPA / EDQM / WHO Mumbai Conference 28 September 2012 Dr Florence Benoit-Guyod, EDQM Inspector,
More informationQUALITY ASSESSMENT METHODS FOR NEW PRODUCT LAUNCHES: PROCESS VALIDATION LIFECYCLE
QUALITY ASSESSMENT METHODS FOR NEW PRODUCT LAUNCHES: PROCESS VALIDATION LIFECYCLE NAHEED SAYEED-DESTA APOTEX INC. CANADIAN SOCIETY FOR QUALITY 9 TH QUALITY CONGRESS SEPTEMBER 7-8, 2017 OUTLINE Introduction
More informationUSING OPERATIONAL EXCELLENCE (OPEX) AND LEAN MANAGEMENT TO IMPROVE ORGANIZATIONAL INTELLIGENCE
PHARMATALK 11 TH MAY 2015 BERLIN USING OPERATIONAL EXCELLENCE (OPEX) AND LEAN MANAGEMENT TO IMPROVE ORGANIZATIONAL INTELLIGENCE Dr. Joerg Tautrim Strategic Lean consultant, Director Lean Institute Germany
More informationEnforcement of Compliance with GMPs in API manufacture
Enforcement of Compliance with GMPs in API manufacture Guy Villax Copyright Hovione 2004 No one is more active in pharmaceutical ingredients Agenda What are APIs, GMP What is the legal framework What is
More informationTHE NEW QUALITY PARADIGM OPPORTUNITIES AND EXPECTATIONS IN ICH Q8 Q9 Q10 Q11 DR. FRITZ ERNI
THE NEW QUALITY PARADIGM IN ICH Q8 Q9 Q10 Q11 OPPORTUNITIES AND EXPECTATIONS DR. FRITZ ERNI FRITZ@ERNI.NET THE NEW PARADIGM OR QUALITY BY DESIGN Why do we need it! Some background Information The impact
More informationValidation of MES and Manufacturing Automation systems
Validation of MES and Manufacturing Automation systems The FDA Group Presentation APRIL 26, 2017 Chinmoy Roy, B.S. (Hons.) MSCS Industry Consultant 1 Agenda What is a MES Validation concepts Validation
More informationModern Validation Technology Boot Camp
2018 Modern Validation Technology Boot Camp Modern Process validation Risk based Modern cleaning Validation Facility and equipment qualification? Risk analysis Advanced Topics Protocols and SOPs 6700 TransCanada,
More informationStandard Monitoring System
Cleanroom-Requirements according to Annex 1, EU-GMP-Guidelines Strict requirements for compliance with the environmental conditions in the relative cleanroom classes Continuous data recording and archiving
More informationNotice. Health Canada is pleased to announce the adoption of the ICH guidance Q8, Q9 and Q10 Questions & Answers (R4).
February 5, 2016 Notice Our file number: 16-100246-83 Adoption of International Conference on Harmonisation of Technical Requirements for the Registration of Pharmaceuticals for Human Use (ICH) Guidance:
More informationCurrent Hotspots during CMC Evaluation a European Regulatory Perspective
www.pei.de Current Hotspots during CMC Evaluation a European Regulatory Perspective CMC Strategy Forum Japan 2018 3-4 December, Tokyo Steffen Gross, Head Section monoclonal - and polyclonal Antibodies
More informationGood Engineering Practices: What Can We Learn from the Pharmaceutical Industry
Good Engineering Practices: What Can We Learn from the Pharmaceutical Industry ISA EXPO 2009 Standards Certification Education & Training Publishing Conferences & Exhibits Welcome Background George Buckbee,
More informationManaging Validation. Paperless Recorders
Managing Validation Paperless Recorders Multitrend Plus Validation Background The past five years has seen an increase in the use of computerized systems and products in the pharmaceutical and bio-pharmaceutical
More informationDevelop a Roadmap for the Implementation of a Global CSV Program. Eileen Cortes April 26, 2017
Develop a Roadmap for the Implementation of a Global CSV Program Eileen Cortes April 26, 2017 Agenda CSV Regulation Principles CSV Lifecycle Approach CSV and Quality Management Governance Program and CSV
More informationKey Definitions 6/16/2015
Technology Transfer from a CDMO Perspective Joe Cobb, CPIP Director, Pharmaceutical Development Metrics Contract Services, a division of Mayne Pharma US 18-June-2015 Key Definitions CDMO Contract Development/Manufacturing
More informationProcess Design Risk Management A Proactive Approach
Page 1 of 7 Guest Column August 30, 2017 Process Design & Risk Management A Proactive Approach By Sandra Wassink, Principal Process Engineer, Pharmatech Associates The FDA has given us the green light
More informationKINGSMANN CARE GROUP
PHARMA CONSULTANTS KINGSMANN CARE GROUP KINGSMANN CONSULTANCY SERVICES Thank you for taking interest in Kingsmann Consultancy Services. Kingsmann Consultancy (KC) is a leading business development-consulting
More informationQuality Implementation Working Group on Q8, Q9 and Q10 Questions & Answers
INTERNATIONAL CONFERENCE ON HARMONISATION OF TECHNICAL REQUIREMENTS FOR REGISTRATION OF PHARMACEUTICALS FOR HUMAN USE Quality Implementation Working Group on Q8, Q9 and Q10 & Current version dated June
More informationProcess Validation (PV): Designing an Effective PV Program. Mike Porter Compliance Consultant Commissioning Agents Inc.
Process Validation (PV): Designing an Effective PV Program Mike Porter Compliance Consultant Commissioning Agents Inc. (CAI) 24Apr2013 Agenda Process Validation Background Stage 1: Process Design Stage
More informationMES Middle Ages Evolution Space. Florian Seitz Werum Asia Support Centre
MES From Past to Present to Future 1 MES Middle Ages Evolution Space Florian Seitz Werum Asia Support Centre MES From Past to Present to Future 2 From Past to Present to Future Nokia 5100 iphone 5 15 years
More informationApplication of Quality by Design in formulation and process Development
21 st EAFP Annual Conference, Quality Assurance in Pharmacy Education, May 14-16, 2015 Application of Quality by Design in formulation and process Development Stavros N. Politis, Pharmacist, MSc, PhD Laboratory
More informationEquipment Risk Management
Equipment Risk Management A Quality Systems Approach Palash Chandra Das Agenda Brief Introduction Correlation between Quantitate and qualitative approach Implementation and assessment Discussion with practical
More informationBasics Of Labwasher Cleaning Validation
Basics Of Labwasher Cleaning Validation A Q&A With James Espiritu, Laboratory Equipment Business Applications Manager, Miele Validation is vital to pharmaceutical processes because it assures quality,
More informationIncreasing Focus on Excipients
The New Paradigm for Excipient Qualification and Supply Chain Control IPEC Update David R. Schoneker Director of Global Regulatory Affairs - Colorcon Chairman International Pharmaceutical Excipients Council
More informationGood Automated Manufacturing Practices (GAMP)
Good Automated Manufacturing Practices (GAMP) Klaus Krause, Amgen ISPE/GAMP Americas Steering Committee ISPE San Francisco/Bay Area Chapter Meeting, October 7, 2004 Presentation Overview I. GAMP - Organization
More informationManaging Quality in Pharmaceutical Industry Using Six Sigma. Edited by Mahmoud Farouk Moussa TQM, CSSBB, MBA
Managing Quality in Pharmaceutical Industry Using Six Sigma Edited by Mahmoud Farouk Moussa TQM, CSSBB, MBA Outlines Pharmaceutical Manufacturing Process and Drug Product Quality. Process Excellence Approach
More informationStage 3 - Process Validation: Measuring what matters
Stage 3 - Process Validation: Measuring what matters Trevor Schoerie - PharmOut A quote. The company that fails is the company that comes to us and says Just tell us what to do and we will do it. The company
More informationProcess Validation Guidelines. by Pramote Cholayudth Thai Industrial Pharmacist Association (TIPA)
Process Validation Guidelines by Pramote Cholayudth cpramote2000@yahoo.com Thai Industrial Pharmacist Association (TIPA) September 19, 2016 1 2 Process Validation References Hierarchy Law Regulatory Guidelines
More informationOverview of Regulatory Requirements for API and Formulations
Overview of Regulatory Requirements for API and Formulations Sangeeta Sardesai 4-Dec-2010 Definition - Regulatory Requirement The restrictions, licenses, and laws applicable to a product or business, imposed
More informationIdentifying and Controlling CPPs and CMAs
March 2018, BioPharm International Publication Identifying and Controlling CPPs and CMAs Thomas A. Little Ph.D. 2/22/2018 President/CEO Thomas A. Little Consulting, BioAssay Sciences 12401 N Wildflower
More informationEquipment Qualification Ensure Fit for Intended Use. IVT Amsterdam Conference Mary Sexton. 19 Mar 2015
Equipment Qualification Ensure Fit for Intended Use IVT Amsterdam Conference Mary Sexton 19 Mar 2015 Equipment Qualification Ensure Fit for Intended Use 1. Types of Qualification 2. Validating Equipment
More informationChallenges in Getting Global Approvals for Post-approval Changes
Slide no 1 Supply Flexibility Program, ROFE 2009 Challenges in Getting Global Approvals for Post-approval Changes FDA/PQRI Conference on Evolving Product Quality September 17, 2014 Andrew Chang, Ph.D.
More informationContinuous Manufacturing: An Industry View
Novartis Pharmaceuticals Continuous Manufacturing: An Industry View Diane Zezza Novartis Pharmaceuticals FDA/PQRI Conference on Advancing Product Quality March 22, 2017 Where are we today? Continuous Manufacturing
More informationExcipients Facing Increased Scrutiny How to Use Secondary Reference Standards to Help Maintain Regulatory Compliance
Excipients Facing Increased Scrutiny How to Use Secondary Reference Standards to Help Maintain Regulatory Compliance by Tom Savage, NSF International Since 2008, when patient deaths were first linked to
More informationLibrary Guide: Active Pharmaceutical
Library Guide: Active Pharmaceutical Ingredients (API) Table of Contents Overview...3 Sample Curriculum...5 Course Descriptions: A Step-by-Step Approach to Process Validation (PHDV79)...7 A Tour of the
More informationEUROPEAN INDUSTRIAL PHARMACISTS GROUP. Guidance on CPD for QUALIFIED PERSONS
EUROPEAN INDUSTRIAL PHARMACISTS GROUP Guidance on CPD for QUALIFIED PERSONS EIPG Guidance on CPD for QP Continuing Professional Development for Qualified Persons, Technical Directors and other Responsible
More informationICH Quality Implementation Working Group POINTS TO CONSIDER
ICH Quality Implementation Working Group POINTS TO CONSIDER ICH-Endorsed Guide for ICH Q8/Q9/Q10 Implementation Document date: 16 June 2011 International Conference on Harmonisation of Technical Requirements
More informationPAT & Risk-Based Initiatives: Implementation Issues PDA New England - 8 th Dec Cliff Campbell B.E., C.Eng. CC&A Ltd., Cork, Ireland
PAT & Risk-Based Initiatives: Implementation Issues PDA New England - 8 th Dec 2004 Cliff Campbell B.E., C.Eng. CC&A Ltd., Cork, Ireland cca@iol.ie 1 FDA Context 1) FDA 5-Part Strategic Plan Protect &
More informationTesto Expert Knowledge. The GxP Dictionary 1st edition. Definitions relating to GxP and Quality Assurance
Testo Expert Knowledge The GxP Dictionary 1st edition Definitions relating to GxP and Quality Assurance Note: Some of the information contained in this GxP Dictionary does not apply equally to all countries.
More informationCleaning Validation PRODUCT OVERVIEW
PRODUCT OVERVIEW E700 SERIES SUCCESS IN PHARMA Prozess has established itself as a leader in the technically challenging and regulatory complex pharmaceutical sector, and includes 16 of the top 20 global
More informationWebinar Expert Module 3: GMP Inspections Dupont
Webinar Expert Module 3: GMP Inspections Dupont 26 January & 9 February 2018 GOP-Innovations your Partner for Practical Training and e-learning Milenko Pavičić Pharmaceutical microbiologist, trainer, coach
More informationPrequalification of Medicines Programme
Prequalification of Medicines Programme SOP 408.4 Annex A WHO PUBLIC INSPECTION REPORT Finished Product Manufacturer WHO PUBLIC INSPECTION REPORT (WHOPIR) Finished Product Manufacturer Part 1: General
More informationManual 069 The validation of facilities and system
1. Purpose The purpose of this guideline is to provide requirements for the Validation of Facilities and Systems and to outline recommendations on how to achieve compliance. 2. Scope This guideline can
More informationWater purification in the pharmaceutical industry
ABB MEASUREMENT & ANALYTICS APPLICATION DESCRIPTION Water purification in the pharmaceutical industry Providing independent verification and validation of the water purification process for compliance
More informationPost Approval Change Management Protocols/Comparability Protocols (PACMPs/CPs) Current and Future State
Post Approval Change Management Protocols/Comparability Protocols (PACMPs/CPs) Current and Future State AAPS 2017 AM Sunrise Session Pramod Kotwal, Ph.D. Global Reg. Affairs Clinical Safety- CMC Policy
More informationWorld Journal of Pharmaceutical Research SJIF Impact Factor 5.990
SJIF Impact Factor 5.990 Volume 4, Issue 9, 444-454. Review Article ISSN 2277 7105 COMPUTER SYSTEM VALIDATION: A REVIEW Patil Yogesh* Mali Kamlesh, Bodhane Mohini, Ram Phad, Shaikh Ismail, Lale Shivam
More informationContents. Contents (13) 1 Production (23)
1 Production (23) 1.A Sanitation (27) 1.A.1 Organisational prerequisites (27) 1.A.2 Sources of contamination (28) 1.A.3 Responsibilities and implementation (29) 1.B Personnel hygiene (31) 1.B.1 Clothing
More informationAudit Validation Programs Like a Champ (When your time is limited!!) Cathelene Compton 12 October 2017
Audit Validation Programs Like a Champ (When your time is limited!!) Cathelene Compton 12 October 2017 FDA 483 Observations 2 FDA 483 Observations 3 FDA 483 Observations 4 Auditing Validation How to cover
More informationStatus of the ICH Q11 Guideline on Development and Manufacture of the Active Substance. Riccardo Luigetti Prague, 9 December 2009
European Medicines Agency Status of the ICH Q11 Guideline on Development and Manufacture of the Active Substance Riccardo Luigetti Prague, 9 December 2009 The views presented in these slides are those
More informationGMP Compliance. George Acevedo, CQV Senior Engineer M+W Singapore Pte. Ltd
GMP Compliance George Acevedo, CQV Senior Engineer M+W Singapore Pte. Ltd June 2017 Overview GMP Definition and Regulation Our Philosophy and Strategy for Compliance Project Lifecycle Deliverables Master
More informationEUROPEAN COMMISSION HEALTH AND CONSUMERS DIRECTORATE-GENERAL
EUROPEAN COMMISSION HEALTH AND CONSUMERS DIRECTORATE-GENERAL Medicinal Products Quality, Safety and Efficacy Brussels, 6 February 2014 SANCO/TSE/ The received contributions together with the identity of
More informationPRAXIS. A publication by Bioengineering AG
PRAXIS A publication by Bioengineering AG Portrait of Rentschler Biotechnologie GmbH, a globally active service company that supports its clients in the development, production, and registration of biopharmaceuticals.
More informationValidation, Verification and Transfer of Analytical Methods (Understanding and implementing guidelines from FDA/EMA, USP and ICH)
Validation, Verification and Transfer of Analytical Methods (Understanding and implementing guidelines from FDA/EMA, USP and ICH) *** LIMITED TIME OFFER: FREE $100 AMAZON GIFT CARD! *** REGISTER TODAY!
More informationManufacturing Optimisation Inside the Pharmaceutical Supply Chain. Business System Compliance
Manufacturing Optimisation Inside the Pharmaceutical Supply Chain. Business System Compliance Bob Mauger, Principal Validation Consultant Cork, April 3/4 2003 Agenda Business System Compliance Overview
More informationComments from: 1. General comments. International Plasma Fractionation Association (IPFA) Our ref. IP
Submission of comments on Commission proposal for Good Manufacturing Practice for Advanced Therapy Medicinal Products Comments from: Name of organisation or individual International
More informationBiotech Pharmaceutical Cosmeceutical Food. Modular System Design Valves, Pumps, Fittings Heat Exchangers
Biotech Pharmaceutical Cosmeceutical Food Modular System Design Valves, Pumps, Fittings Heat Exchangers CIP Systems Bio Waste Kill Systems Purification Systems Utility Process Modules Formulation Systems
More informationThe Principles and Examples of Cost-Effective and Time Saving Qualification and Validation
The Principles and Examples of Cost-Effective and Time Saving Qualification and Validation Presentation: Eva Baumgartner PRESENTATION OVERVIEW LEAN QUALIFICATION Syntacoll GmbH short company presentation
More informationWhite Paper. Validation of Weighing Processes Are You Up-to-Date?
White Paper Are You Up-to-Date? Good Manufacturing Practice guidelines are continuously revised to consider technological changes and current practices in pharmaceutical manufacturing. validation is a
More informationImplementation of PAT for Real Time Release Testing. Mark Smith Process Analytical Sciences Group Pfizer, Cork
Implementation of PAT for Real Time Release Testing Mark Smith Process Analytical Sciences Group Pfizer, Cork PAT at Pfizer A key enabler for transformational strategies and new quality paradigms 9 Delivering
More informationRevised Pharmaceutical Affair Law and Risk Management
Pharmaceutical Quality Forum 3rd Symposium Revised Pharmaceutical Affair Law and Risk Management Q9 Topic Leader of JPMA Takayoshi Matsumura Continuous Improvement Supplement/ Variation Change Control,
More informationPCI Pharmaceutical Consulting
PCI Pharmaceutical Consulting The Role of the QP: before & after Annex 16 Presented by: Karen Ginsbury For IFF, Denmark March 2016 Responsibility Authority Responsibility Authority Having the duty to perform
More informationNIRS, PAT, RTR testing EU experience and regulatory perspective
NIRS, PAT, RTR testing EU experience and regulatory perspective Heidelberg, Germany October 2013 European Compliance Academy (ECA) Overview of the presentation General considerations Cases submitted in
More informationProcess Validation Lifecycle Approach: A Return to Science
Process Validation Lifecycle Approach: A Return to Science PDA New England Chapter / ISPE Boston Chapter Joint Meeting September 16, 2015 Woburn, MA Rusty Morrison Principal Consultant, CAI Consulting
More informationVince Anicetti EVP Quality and Compliance, Coherus Biosciences West Coast PDA 20 October 2016
Quality Management in a Virtual Environment Vince Anicetti EVP Quality and Compliance, Coherus Biosciences West Coast PDA 20 October 2016 Biosimilars - the second wave of biotech -an evolving regulatory
More information