Certificate of Registration. Kirkhill Aircraft Parts Co (Proponent) 3120 and 3051 Enterprise Street Brea, California, 92821, United States
|
|
|
- Claude Fisher
- 6 years ago
- Views:
Transcription
1 Certificate of Registration This certifies that the Quality Management System of has been assessed by NSF-ISR and found to be in conformance to the following standard(s): ISO 9001:2008 Scope of Registration: The manufacturing and/or worldwide distribution of precision components to the aviation industry. This shall include but not be limited to: FAA or OEM approved product, aircraft interior/exterior detail parts/assemblies, fuel caps, bearings, and airframe parts. Also included are commercial machined products and assemblies; electrical connectors and components; seals, clamps and couplings, o-rings, caps, plugs, grommets, clamps, and miscellaneous commercial or industry standard hardware that is intended to be utilized within the aviation industry. Certificate Number: Certificate Issue Date: Registration Date: Expiration Date *: 9Z591-IS17 13-FEB JUN MAY-2018 Carl Blazik, Director, Technical Operations & Business Units, NSF-ISR, Ltd. Page 1 of 3
2 9Z591-IS17 CERTIFICATE ISSUE DATE: 13-FEB Z593 1 Industrial Park Rd. Centerbrook, Connecticut, 06409, United States - C KAPCO Netherlands B.V. J. Keplerweg 16 Alphen aan den Rijn, 2408 AC, The Netherlands - C Kirkhill Aircraft Parts Co, UK Ltd KAPCO House, 37 Woolmer Way Bordon, Hampshire, GU35 9QE, United Kingdom - C State Street, Suite 1 Tamarac, Florida, 33321, United States - C Rue de l'ecorcage Z.A. du Ried Schweighouse sur Moder, 67590, France The manufacturing and/or worldwide distributor of precision components to the aviation industry. The manufacturing of precision components worldwide for the commercial aviation and aerospace industries. Kitting and assembly of aero engine connectors and stockist of electrical connectors, relays and associated products for military/aerospace applications. Aviation Product Support Value-Added Distributor for Expendable Electromechanical Components and for Lavatory & Potable Water Service. Stocking and Distribution of represented Manufacturers Products providing support to the Aviation Industry with source lot traceability Distribution and stocking of electromechanical components and hardware for aerospace and defense applications. Page 2 of 3
3 9Z591-IS17 CERTIFICATE ISSUE DATE: 13-FEB C Kapco Global Pte Ltd. 15 Changi North Street 1 Unit 01-30, , Singapore Stockist and worldwide distributor of precision components to the aviation industry. Page 3 of 3
4 Certificate of Registration This certifies that the Quality Management System of has been assessed by NSF-ISR and found to be in conformance to the following standard(s): AS9100C *Audited in accordance with AS9104/1:2012 Requirements for Aviation, Space, and Defense Quality Management System Certification Programs. NSF-ISR is accredited under the Americas Aerospace Quality Group Registration Management Committee. Scope of Registration: Multi-site: (Central Office) The manufacturing and/or worldwide distribution of precision components to the aviation industry. This shall include but not be limited to: FAA or OEM approved product, aircraft interior/exterior detail parts/assemblies, fuel caps, bearings, and airframe parts. Also included are commercial machined products and assemblies; electrical connectors and components; seals, clamps and couplings, o-rings, caps, plugs, grommets, clamps, and miscellaneous commercial or industry standard hardware that is intended to be utilized within the aviation industry. Certificate Number: Certificate Decision/Re-Issue Date: Certificate Issue Date: Expiration Date *: 9Z591-AS35 13-FEB JUN MAY-2018 Carl Blazik, Director, Technical Operations & Business Units, NSF-ISR, Ltd. Page 1 of 2
5 9Z591-AS35 CERTIFICATE DECISION/RE-ISSUE DATE: 13-FEB Industrial Park Rd. Centerbrook, Connecticut, 06409, United States Kirkhill Aircraft Parts Co, UK Ltd KAPCO House, 37 Woolmer Way Bordon, Hampshire, GU35 9QE, United Kingdom State Street, Suite 1 Tamarac, Florida, 33321, United States The manufacturing and/or worldwide distributor of precision components to the aviation industry. Kitting and assembly of aero engine connectors. Aviation Product Support Value-Added Distributor for Expendable Electromechanical Components and for Lavatory & Potable Water Service. Stocking and Distribution of represented Manufacturers Products providing support to the Aviation Industry with source lot traceability Page 2 of 2
6 Certificate of Registration This certifies that the Quality Management System of has been assessed by NSF-ISR and found to be in conformance to the following standard(s): AS9120A *Audited in accordance with AS9104/1:2012 Requirements for Aviation, Space, and Defense Quality Management System Certification Programs. NSF-ISR is accredited under the Americas Aerospace Quality Group Registration Management Committee. Scope of Registration: Multi-site: (Central Office) Stockist and worldwide distributor of precision components to the aviation industry. This shall include but not be limited to: FAA or OEM approved product, aircraft interior/exterior detail parts/assemblies, bearings, airframe parts, and other miscellaneous commercial or industry standard hardware that is intended to be utilized within the aviation industry. Certificate Number: Certificate Decision/Re-Issue Date: Certificate Issue Date: Expiration Date *: 9Z591-AS34 13-FEB JUN MAY-2018 Carl Blazik, Director, Technical Operations & Business Units, NSF-ISR, Ltd. Page 1 of 3
7 9Z591-AS34 CERTIFICATE DECISION/RE-ISSUE DATE: 13-FEB Industrial Park Rd. Centerbrook, Connecticut, 06409, United States KAPCO Netherlands B.V. J. Keplerweg 16 Alphen aan den Rijn, 2408 AC, The Netherlands Kirkhill Aircraft Parts Co, UK Ltd KAPCO House, 37 Woolmer Way Bordon, Hampshire, GU35 9QE, United Kingdom State Street, Suite 1 Tamarac, Florida, 33321, United States Stockist and worldwide distributor of precision components to the aviation industry. Stockist and worldwide distributor of precision components to the aviation industry. Stockist of electrical connectors, relays and associated products for military/aerospace applications. Aviation Product Support Value-Added Distributor for Expendable Electromechanical Components and for Lavatory & Potable Water Service. Stocking and Distribution of represented Manufacturers Products providing support to the Aviation Industry with source lot traceability Page 2 of 3
8 9Z591-AS34 CERTIFICATE DECISION/RE-ISSUE DATE: 13-FEB Rue de l'ecorcage Z.A. du Ried Schweighouse sur Moder, 67590, France Kapco Global Pte Ltd. 15 Changi North Street 1 Unit 01-30, , Singapore Distribution and stocking of electromechanical components and hardware for aerospace and defense applications. Stockist and worldwide distributor of precision components to the aviation industry. Page 3 of 3
9 Certificate of Registration This certifies that the Environmental Management System of Kirkhill Aircraft Parts Co, UK Ltd KAPCO House, 37 Woolmer Way Bordon, Hampshire, GU35 9QE, United Kingdom has been assessed by NSF-ISR and found to be in conformance to the following standard(s): ISO 14001:2004 Scope of Registration: Kitting and assembly of aero engine connectors and stockist of electrical connectors, relays and associated products for military / aerospace applications. Certificate Number: Certificate Issue Date: Registration Date: Expiration Date *: C EM3 13-FEB JAN SEP-2018 Carl Blazik, Director, Technical Operations & Business Units, NSF-ISR, Ltd.
Certificate of Registration. Kirkhill Aircraft Parts Co (Proponent) 3120 and 3051 Enterprise Street Brea, California, 92821, United States
Certificate of Registration This certifies that the Quality Management System of has been assessed by NSF-ISR and found to be in conformance to the following standard(s): ISO 9001:2008 Scope of Registration:
Certificate of Registration. Kirkhill Aircraft Parts Co (Proponent) 3120 and 3051 Enterprise Street Brea, California, 92821, United States
Certificate of Registration This certifies that the Quality Management System of has been assessed by NSF-ISR and found to be in conformance to the following standard(s): ISO 9001:2008 Scope of Registration:
Certificate of Registration. Kirkhill Aircraft Parts Co (Proponent) 3120 and 3051 Enterprise Street Brea, California, 92821, United States
Certificate of Registration This certifies that the Quality Management System of has been assessed by NSF-ISR and found to be in conformance to the following standard(s): ISO 9001:2008 Scope of Registration:
Certificate of Registration
Certificate of Registration This certifies that the Quality Management System of has been assessed by NSF-ISR and found to be in conformance to the following standard(s): AS9100D with ISO 9001:2015 *Audited
Quality Assurance. Visit our online shop: myleki.com. Worldwide support: lekiaviation.com. AS9120 Rev. A & ISO 9001 FAA AC00-56.
QUALITY MATTERS Every Step of the Way Proper certification and quality assurance are essential in aviation. Leki Aviation understands that potential customers would like to verify the credentials before
Manufacturing % Distribution % Broker % Other % Do you have liability Insurance? Contact Name Direct Telephone/Extension
Please return to: Wencor Group Email: Mail: Fax: Original Requestor OR pmaquality@wencor.com 1625 N 1100 W, Springville, UT 84663 801-489-2101 1. COMPANY GENERAL INFORMATION Legal Name of Company Parent
Kirkhill Aircraft Parts Co Corporate Quality Manual
This is a Controlled Document when electronically accessed via the Kapco Global Document Management System (CATSWEB), otherwise this document shall be considered as an Uncontrolled Document Kirkhill Aircraft
CONTACT US OUR SERVICES OUR PRODUCTS QUALITY CERTIFICATIONS EN9120/AS9100, SC21 BRONZE AWARD
ALA is an innovative provider of Supply Chain Solutions for C-class components, indirect materials and a variety of aerospace specific parts to the Airframe, Engine Systems and MRO of both Commercial and
Voluntary Industry Distributor Accreditation Program (AC 00-56)
U.S. Department of Transportation Federal Aviation Administration Voluntary Industry Distributor Accreditation Program (AC 00-56) FY 2004 Audit Report Prepared by Aircraft Certification Service & Flight
Counterfeit Prevention, Detection and Avoidance Standards Gap Analysis for Hardware Products
International Organization for ization (ISO), ISO 9001 Quality Management Systems - Requirements Assemblies and Equipment ISO/IEC 20243:2015 - Information Technology Open Trusted Technology ProviderTM
FLAIR MOLDED PLASTICS, INC.
MOLDED PLASTICS, INC. LET US SHAPE YOUR IDEAS. FLAIR MOLDED PLASTICS, INC. ABOUT US Flair Molded Plastics, Inc. is a privately owned injection molding corporation, and have been shaping the future for
Supplier questionnaire. 1. Organisation Details (Mandatory) Quality Department Details (or representative)
In order to register your organisation as an approved supplier on our List of Approved Suppliers in accordance with the requirements of our Quality Management System, ISO9001 and AS9120 standards as revised,
Additional Information
To Our Valued Customer: Supliaereos USA LLC DBA Aero Supply USA has generated this form in an effort to standardize response and reduce valuable time and labor involved with manual response to multiple
COMPANY SUMMARY QUALITY AND SAFETY MANAGEMENT SYSTEM. includes Self Audit
COMPANY SUMMARY QUALITY AND SAFETY MANAGEMENT SYSTEM includes Self Audit may 2013 AIRCRAFT EQUIPMENT OVERHAULS & SALES (NSW) PTY LIMITED QUALITY & SAFETY MANAGEMENT SYSTEM & COMPANY SUMMARY 29 NORMAN STREET
ALTA Precision Inc. Quality Procedure
ALTA Precision Inc. Quality Procedure Procedure QAP 7.4.2 Issue 7 Date September 28, 2015 Page 1 of 5 ALTA Quality Requirements for Suppliers Prepared and issued by Marc Dumouchel Approved by Sonia Alonso
Kirkhill Aircraft Parts Co Corporate Quality Manual
This is a Controlled Document when electronically accessed via the Kapco Global Document Management System (CATSWEB), otherwise shall be considered as an Uncontrolled Document Kirkhill Aircraft Parts Co
Certificate of Approval
Certificate of Approval This is to certify that the Management System of: Hydratight Limited Unit 601, Access 10 Business Park, Bentley Road South, Darlaston, WS10 8LQ, United Kingdom has been approved
Glenair Quality Depends on Me!
Glenair Inc., 1211 Air Way, Glendale California 91201 - Telephone: (818) 247-6000, Fax: (818) 543-0317 Quality Policy and Objectives Glenair Quality Depends on Me! #1 Quality Policy Glenair Quality Depends
Bournemouth International Airport Christchurch BH23 6NW Telephone:
GA Telesis (UK) Ltd Supplier Self-Survey Company information Company name: Website: Type of business: GA Telesis (UK) Limited www.gatelesis.com Private Limited Company Company Number: 5950981 Date of incorporation:
The Jamaica Bearings Group, serving the world since 1925
The Jamaica Bearings Group, serving the world since 1925 History Jamaica Bearings Company, under the same family ownership since 1934, serves as the foundation for the Jamaica Bearings Group (JBG). Originally
Extensive Parts Inventories. Supply Chain Solutions. Worldwide Distribution Network
Extensive Parts Inventories Supply Chain Solutions Worldwide Distribution Network The Ansett Advantage Quality, dependability and the highest standard of service since 1958. (AASS) is a first-tier, full
Worldwide Leader in Aircraft Parts Distribution & PMA Development
Worldwide Leader in Aircraft Parts Distribution & PMA Development CORPORATE HEADQUARTERS Springville, Utah Amsterdam, The Netherlands Chicago, Illinois Singapore Miami, Florida Phoenix, Arizona Atlanta,
Supplier Quality Assurance Requirements (SQAR)
Supplier Quality Assurance Requirements (SQAR) Revision B, Date: 6/9/17 Approved (signature on file) Helen Byrnes Director, Quality Assurance Page 1 of 11 Revision Record The current and applicable issue
Vendor Quality Control Audit Form Quality Assurance Survey
Vendor Quality Control Audit Form Quality Assurance Survey Vendor/Supplier Information Company Name: Street Address: Company Phone: Company Fax Number: City: State: Zip Code: Country: Contact Name (Quality
Supplier Quality Requirements
Page 1 of 5 SQR-01 Quality Management Systems AS9100 Suppliers: The supplier will at a minimum maintain and implement a documented quality management system, available in the English language, which is
Instructions for Supplier Survey
Instructions for Supplier Survey In order to be become a vendor and/or a repair station for Aero Precision, you are required to complete a Quality Systems Survey. Once you have completed the survey, please
Product Safety in Aerospace Manufacturing. November 2016
Product Safety in Aerospace Manufacturing www.nsf-isr.org November 2016 1 Introductions Don McFarland NSF-ISR Technical Scheme Manager, Aerospace dmcfarland@nsf.org 2 Contents Transition Plan Benchmarks
API Upstream Standard Development - Supply Chain Management. Rick Faircloth Chairman SC20
API Upstream Standard Development - Supply Chain Management Rick Faircloth Chairman SC20 1 SC20 Supply Chain Management API SC20 Meeting is scheduled for Thursday (8:30-12:00 AM) If you have a new subject
Satellite Aerospace, Inc. TERMS & CONDITIONS Page 1 of 6
TERMS & CONDITIONS Page 1 of 6 1.0 PURPOSE 1.1 Satellite Aerospace, Inc. Quality Requirements to Subtier Sources. 2.0 SCOPE 2.1 This document applies to all purchasing and sales personnel responsible for
1.1 Wesco Aircraft Supplier Quality Flow Down Requirements to Subtier Sources.
23-APR-18 Q Page 1 of 10 1.0 PURPOSE 1.1 Wesco Aircraft Supplier Quality Flow Down Requirements to Subtier Sources. 2.0 SCOPE 2.1 This document applies to USA, Canada and EPG Only. This document applies
Manufacturing supplier s quality systems must comply with one of the following:
1 of 13 REVISION HISTORY Date Version Description Author 10/14/15 16 Added revision history table. Removed (Teflon, G. DePhillips silicone, etc.) from QC3 5/17/16 17 QS1: Record Retention for Non-serialized
Manufacturing supplier s quality systems must comply with one of the following:
1 of 13 REVISION HISTORY Date Version Description Author 10/14/15 16 Added revision history table. Removed (Teflon, G. DePhillips silicone, etc.) from QC3 5/17/16 17 QS1: Record Retention for Non-serialized
TT Electronics Integrated Manufacturing Services Supplement to Purchase Order Quality Clauses TT Electronics Purchase Order
Q01 Quality System Requirements The supplier shall establish and maintain a quality system that conforms to the requirements of ISO 9001:2008 or AS9100 current revision or previous revision prior to its
Update on ASA s Audit Programs to ASA-100 & ISO/AS Quality System Standards
Update on ASA s Audit Programs to ASA-100 & ISO/AS Quality System Standards Presenters: Stephanie Brown Michele Dickstein George Ringger Kelly Lyon 11 July 2013 - ASA 2013 1 ASA-100 Accreditation ASA-100
Supplier Quality Requirements
1 of 7 NOTE: YELLOW HI-LITE INDICATES CHANGE FROM THE PREVIOUS REVISION GENERAL REQUIREMENTS (Applies to all orders issued from GMW referencing this document) QR-01 Quality Management Systems AS9100 Suppliers:
Control-On-Use Controlados-En-Uso
12/1/15 QUALITY PROGRAM PROVISIONS (PURCHASE ORDERS) The following with their terms and conditions become an integral part of each Purchase Order to the extent specified in the Purchase Order. Important:
Supplier Quality Requirements
1 of 7 NOTE: YELLOW HI-LITE INDICATES CHANGE FROM THE PREVIOUS REVISION GENERAL REQUIREMENTS (Applies to all orders issued from GMW referencing this document) QR-01 Quality Management Systems AS9100 Suppliers:
electronic components 2709 Connector Drive Wake Forest, NC 27587
electronic components 2709 Connector Drive Wake Forest, NC 27587 Thank you for submitting your survey to BTC. BTC Electronic Components, Inc. is an ISO9001:2008 and AS9100 Rev. C certified company. In
AP Quality Consulting works with you to provide a custom solution
AP Quality Consulting works with you to provide a custom solution ISO 9001, ISO/IEC 17025, AS6081, AS5553, AS6171 (in development) Quality auditing and management of internal audit program Corporate training
Out latest Certification is available from our Web Site to download,
Ridgewell House, Hollywood, Ballyboughal, Co. Dublin, Ireland. Ph: +353 1 8433466 Fax: 353 1 8433849 20 th June 2014 To Whom It May Concern: Due to the large number of requests for quality questionnaires
Quality Assurance Manual
Quality Assurance Manual Issued to: Aviation Suppliers Association Manual # : 3 Maximum Aero Support QAM Page 1 Section: TOC/LEP REV: 2 Table of Contents/List of Effective Pages Title Section Page Rev
SPECIAL AUDITS WHAT, WHY AND HOW?
SPECIAL AUDITS WHAT, WHY AND HOW? Mike McRandall and Don McFarland (NSF-ISR) Introductions: Mike McRandall NSF-ISR Business Unit Manager, Aerospace mmcrandall@nsf.org Don McFarland NSF-ISR Technical Scheme
QUALITY ASSURANCE PROCEDURE: SUPPLIER QUALITY REQUIREMENTS
Originator: RCG Page 1 of 6 1. PURPOSE This document defines minimum quality requirements for suppliers of products or processes to Whelen Engineering Company, Inc. ( Whelen ), when the products or processes
AJW Aviation Quality Exposition & Self Audit
AJW Aviation Quality Exposition & Self Audit * This document may be used by Customers as a substitute for their questionnaires/surveys to approve AJW Aviation as a supplier. Note to Reader... 2 1. Company
Self-Audit Checklist
Page 1 Company Name: Date of audit: Date of last audit performed: Name of person performing self-audit: Signature: Name of person responsible for quality system: Signature: Page 2 Number of non-compliances:
Absolute Manufacturing. Supplier Quality Requirements
Supplier Quality Requirements Page 1 of 12 Absolute Manufacturing Senior Operations, LLC Supplier Quality Requirements Supplier Quality Requirements Page 2 of 12 1. Scope: The requirements of this document
AESOP 15604; ISSUE 2; STATUS PENDING APPROVAL; AUTHORITY CARL BLAZIK This document is the property of NSF ISR. Page 1 of 9
This document is the property of NSF ISR. Page 1 of 9 ISO 9001 Quality Management Systems registration provides a set of uniform requirements for a quality management system. A number of quality management
BEST PRACTICES IN THE AEROSPACE INDUSTRY: AN EXAMPLE TO FOLLOW
Claude GOBENCEAUX BEST PRACTICES IN THE AEROSPACE INDUSTRY: AN EXAMPLE TO FOLLOW MAY 31 st, 2013 2 Introduction Flight Plan Aerospace in México - Industry Highlights - Aero Clusters and the ACQ - The SAFRAN
EST Group. Solutions for Heat Exchanger Tube Repair and Pipe & Pressure Vessel Testing & Isolation
EST Group Solutions for Heat Exchanger Tube Repair and Pipe & Pressure Vessel Testing & Isolation With a proud legacy spanning more than 85 years, Curtiss-Wright is a global innovative company that delivers
EST Group. Solutions for Heat Exchanger Tube Repair and Pipe & Pressure Vessel Testing & Isolation
EST Group Solutions for Heat Exchanger Tube Repair and Pipe & Pressure Vessel Testing & Isolation With a proud legacy spanning more than 85 years, Curtiss-Wright is a global innovative company that delivers
Absolute Manufacturing. Supplier Quality Requirements
Supplier Quality Requirements Page 1 of 12 Absolute Manufacturing Senior Operations, LLC Supplier Quality Requirements Supplier Quality Requirements Page 2 of 12 1. Scope: The requirements of this document
General Purchase Order Requirements
General Purchase Order Requirements [NOTE: Some of the requirements listed below are contingent upon other variables (i.e. aerospace products, when required by Purchase Order, if applicable, as applicable
IKHANA Aircraft Services, Fabrication Division PO Quality Clauses
Quality Requirements The following requirements apply at minimum, additional requirements may be incorporated with the company purchase order. Material and Hardware Providers - Q1, Q2, Q3, Q4, Q5, Q8,
Purchase Order Quality Clause SCC40 Revision G, Effective 1/20/2015
Clause A - Quality System Requirements All references to the term Government in any of the documents referenced below shall be replaced with the term Curtiss-Wright and/or the Government. All references
SUPPLIER QUALITY PROGRAM, IV (U)
PRODUCT QUALITY REQUIREMENTS PQR 1050 PAGE 1 OF 14 FEDERAL MANUFACTURING & TECHNOLOGIES (PQR 1050_L.doc) SUPPLIER QUALITY PROGRAM, IV (U) CHANGE HISTORY ISSUE DESCRIPTION OF CHANGE AUTHOR DATE D CORRECTED
AVTRADE SPECIALISES IN THE PROVISION OF AN EXTENSIVE RANGE OF GLOBAL AIRCRAFT COMPONENT SUPPORT SOLUTIONS, INDIVIDUALLY DESIGNED TO MEET CUSTOMER
AVTRADE SPECIALISES IN THE PROVISION OF AN EXTENSIVE RANGE OF GLOBAL AIRCRAFT COMPONENT SUPPORT SOLUTIONS, INDIVIDUALLY DESIGNED TO MEET CUSTOMER SPECIFIC REQUIREMENTS WITH A FOCUS ON QUALITY, PERFORMANCE
Supplier Approval Questionnaire
1 Supplier Approval Questionnaire Quality Management Survey & DPD/MBD and CMS Assessment Reviewed by: Supplier Code: Assigned Commodity Code: Date: To be filled out by LMI SQE AS9100 Rev C YES NO Certified:
PURCHASE ORDER QUALITY SYSTEM REQUIREMENTS
1 2 3 4 5 Quality System Requirements General location and, where required, obtain approval. Right of access by Microphase, their customer, and regulatory authorities to the applicable areas of all facilities
AJW Aviation Quality Exposition. (Incl. Self-Audit)
AJW Aviation Quality Exposition (Incl. Self-Audit) * This document may be used by Customers as a substitute for their questionnaires/surveys to approve AJW Aviation as a supplier. Page 1 of 18 Note to
Purchase Order Quality Clause SCC20 Revision E, Effective 1/20/2015
Clause A - Quality System Requirements All references to the term Government in any of the documents referenced below shall be replaced with the term Curtiss-Wright and/or the Government. All references
LM Logistic Services Quality Notes Conversion Chart
Page 1 of 10 LM Logistic Services s Conversion Chart The latest issue to this document is the version that is available on the Lockheed Martin Logistic Services Supplier Management website: http://www.lockheedmartin.com/us/suppliers/bu-info/aeronautics/sustainment-services.html
Rev 1/19
Our Business Platforms Since 1919, BSC Industries has remained committed to delivering world class products, engineered solutions, and outstanding customer service. Organized around four business platforms,
R L POINT WIND CONE PWC FAA [-806 PWC-8061 L HTED LIGHTING ASSEMBLY 4 FLOODLIGHTS OPTION: FE FLOOR FLANGE. // PL Floor Flange
R L CORPORATION POINT WIND CONE PWC FAA [-806 PWC-8061 L HTED LIGHTING ASSEMBLY 4 FLOODLIGHTS OPTION: FE FLOOR FLANGE // PL1 0412 Floor Flange 8-inch outside diameter 6-inch diameter bolt circle Four (4)
Company. ACT The Integrated Solution
ACT The Integrated Solution Our Formed in 2002 Specifically to Support Fielded F-16s Encouragement from LM Aero and USAF Log Command Majority Interest Owned by HEICO Corporation Cage Code 1XKR3 Based In
ISO 9001 AS 9100 AQAP Excellence in low volume production
ISO 9001 AS 9100 AQAP 2110 Excellence in low volume production History 1978 Start subcontracting activities in machining for Aerospace markets 1992 MBO sheet metal activities from Thales 2000 Integration
SUPPLIER QUALITY ASSURANCE REQUIREMENTS
FM-304 8/23/2018 RELEASED Page 1 of 4 1.0 SCOPE 1.1 When specified, this document defines the Quality System requirements to be met by suppliers in the performance of a purchase order issued by Computech
SELF SURVEY. AAR AIRCRAFT COMPONENT SERVICES - AMSTERDAM Address: Kruisweg 705 Mail: P.O. Box ND Hoofddorp 2130 AB Hoofddorp
SELF SURVEY Supplier Name: AAR AIRCRAFT COMPONENT SERVICES - AMSTERDAM Address: Kruisweg 705 Mail: P.O. Box 52 2132 ND Hoofddorp 2130 AB Hoofddorp The Netherlands The Netherlands Phone Number: +31 (0)20
002 Supplier Quality System Compliance with Rocker Quality System for Suppliers is required for this Purchase Order.
Rocker Industries Supplier Quality Assurance Requirements When any of the following SQAR codes appear on a Purchase Order, the supplier must comply with the requirement. If the supplier has questions or
COMPLEX TECHNOLOGIES
COMPLEX TECHNOLOGIES About Sparton Corporation Sparton has become the partner of choice for companies that want to design and manufacture the most complex electronic and electromechanical devices. We have
UNCONTROLLED IF PRINTED 2 of 13
Forward Revision History NR-L Various Remove Revision with over one year of information M: 05-09-16 Revised pages 9 and 10 to change Form Name to Supplier Evaluation for Limited Scopes ; Revised page 11
This document defines the Company s quality management system.
23-JAN-18 N/C Page 1 of 48 PURPOSE SCOPE This document defines the Company s quality management system. This document applies to all personnel. This document applies to the listed sites. AS9100 - AS9120
Aerospace series Quality management systems Assessment applicable to maintenance organizations (based on ISO 9001:2000)
SVENSK STANDARD SS-EN 9111:2005 Fastställd 2005-12-16 Utgåva 1 Aerospace series Quality management systems Assessment applicable to maintenance organizations (based on ISO 9001:2000) ICS 49.020 Språk:
Satellite Aerospace, Inc. TERMS & CONDITIONS Page 1 of 5
TERMS & CONDITIONS Page 1 of 5 1.0 PURPOSE 1.1 Quality Requirements to Subtier Sources. 2.0 SCOPE 2.1 This document applies to all purchasing and sales personnel responsible for the flow down of Quality
APIQR - Monogram Programs Update. January 25, 2018
APIQR - Monogram Programs Update January 25, 2018 History of API Founded in 1919 as the trade association for the oil and natural gas industry Originally headquartered in New York City Primary operations
Supplier Quality System Requirements
Supplier Quality System Requirements 1.0 SCOPE This document defines quality systems that are required for those suppliers, vendors, and subcontractors (here after referred to as the Seller ) providing
ABOUT US. Who We Are. How We Do It
ABOUT US Who We Are Unit Industries Group, Inc. has been dedicated to developing innovative manufacturing solutions with a core of professionals who have over a century of combined experience in integrated
Please retain this letter for future reference, as it details the current GEAE quality system requirements.
GE Aircraft Engines Dear GEAE Supplier: August 1, 2003 Please retain this letter f future reference, as it details the current GEAE quality system requirements. In a letter dated January 25, 2002, which
KING AIR. Medical Stretchers & Attendant Seats
Medical Stretchers & Attendant Seats Medical Stretchers Description: Kit includes stretcher unit and cover, Ferno model 12-C portable aero (folding) litter, mattress, mattress cover (conforms to FAR 23.853
To Requestor: Kind Regards, Joaquin Perez extension 2199 Intelligently Defining Aviation TM 1 P a g e
GA Telesis, LLC 1850 NW 49 th Street Fort Lauderdale, FL 33309 Tel: +1 954 676 3111 Fax: +1 954 676 9998 To Requestor: In an effort to serve our customers and suppliers more efficiently, we have developed
External Provider Quality Requirements
Page 1 of 12 The latest issue to this document is the version that is available on the Lockheed Martin Logistics Services Supplier Quality Management website: http://www.lockheedmartin.com/us/suppliers/bu-info/aeronautics/sustainment-services.html
Aviation Suppliers Association Quality System Standard. ASA-100 Revision 3.4
Page 1 Aviation Suppliers Association Quality System Standard ASA-100 Revision 3.4 Original Issue: March 1994 Revision 3.4 Release Date: August 1, 2002 Effective Date: November 1, 2002 Copyright 1994-2003
Service Steel Aerospace- Massillon 175 Wetmore S. E. Massillon, OH (US & Canada) fax
To whom it may concern, Your request for a supplier survey has been received by Service Steel Aerospace. Due to the high volume of requests, Service Steel is furnishing the following information in lieu
MAC AEROSPACE. Complete Logistics Solutions for your Military Aircraft, Radar and Weapon Systems Requirements
MAC AEROSPACE C O R P O R A T I O N Complete Logistics Solutions for your Military Aircraft, Radar and Weapon Systems Requirements MISSION To contribute to the achievement of maximum operational readiness
Risk-Based PMA. Process. Federal Aviation Administration. Presented to: AEA Technology Incubator By:
Risk-Based PMA Process Presented to: AEA Technology Incubator By: Daniel J. Elgas, Certification Procedures Branch, AIR-6C0 Date: August 16, 2018 Project Background AIR evaluated the level of FAA resources
Chain of Custody Standard
FAO-BASED RESPONSIBLE FISHERIES MANAGEMENT (RFM) Chain of Custody Standard Issue 2.2 1 April 2013 Contents Page Principles of the Process 3 Definitions 4 Outline of the Certification Process 6 Chain of
FAA AC Operational Use of Radio Frequency Identification Systems Onboard Aircraft. Federal Aviation Administration
FAA AC 119-2 Operational Use of Radio Frequency Identification Systems Onboard Aircraft Presented to: By: Date: IATA 4 th Paperless Aircraft Operations Conference 2017 Brian Verna November 14, 2017 AC
Helicopter Maintenance
HELICOPTERS AIRBUS HELICOPTERS Aeroport International Marseille Provence 13725 Marignanne Cedex - France, 2018. All rights reserved, Airbus Helicopters' logo and the names of its products and services
PRECISION MANUFACTURING LTD. CNC Milling CNC Turning Project Management Assembly
PRECISION MANUFACTURING LTD CNC Milling CNC Turning Project Management Assembly About Aerotech We are a highly professional and responsive company who provide a complete manufacture and assembly service
Supplier Quality Requirements (ASQR)
DEFINITIONS PEI: PRECISION ENGINEERING INC QMS: Quality Management System PO: Purchase Order Supplier: Supplier, seller, vendor, subcontractor, etc. Supplier Quality Requirements (ASQR) GENERAL REQUIREMENTS
High Density Seating
High Density Seating High Density Seating Choices Our attractive airline style High Density commuter seats allow you to get the maximum seating capacity in any King Air at the best value. The seats are
MONTANA PRECISION PRODUCTS STANDARD REMARKS
MONTANA PRECISION PRODUCTS STANDARD REMARKS TABLE OF CONTENTS A- MPP STANDARD B- CERTIFICATE OF CONFORMANCE C- GE-A S-1000 APPLIES D- SPECIAL PROCESSES E- GE APPROVED LAB TESTING F- HEAT LOT REPORT MUST
MONTANA PRECISION PRODUCTS STANDARD REMARKS
MONTANA PRECISION PRODUCTS STANDARD REMARKS TABLE OF CONTENTS A- MPP STANDARD B- CERTIFICATE OF CONFORMANCE C- GE-A S-1000 APPLIES D- SPECIAL PROCESSES E- GE APPROVED LAB TESTING F- HEAT LOT REPORT MUST
Procedure QAP-10 Date Issue Page ALTA Quality Requirements for Suppliers 25 Sept
ALTA Quality Requirements for Suppliers 25 Sept 2017 1 2 3.2. Purchase order information a- When Alta customer is indicated on the purchase order or related engineering documents, customer quality requirements
Supplier Quality Assurance Requirements
Supplier Quality Assurance Requirements This document replaces the contractual Quality Requirements (Exhibit-C) as communicated on December 18, 2015 Fokker Elmo Procurement Department Issue 05, 1 June
SUPPLIER QUALITY REQUIREMENTS (SQR S)
SUPPLIER QUALITY REQUIREMENTS (SQR S) Q01 Q02 Q03 Q04 Q05 Q06 MANDATORY AMRO SOURCE INSPECTION When specified on individual Purchase Orders, Amro Source Inspection shall be performed at supplier s facility
Precision Electrical Termination Certification
Precision Electrical Termination Certification Daniels Manufacturing Corporation Daniels Manufacturing Corporation We re the world leader in tool systems and technology for aerospace, military and communications
PURCHASING QUALITY NOTES
0001 Documented approval scopes issued by VerTechs Enterprises, Inc. Quality are adhered to at all times. When issued, the supplier shall maintain these documents for reference when servicing VerTechs
To Requestor: Kind Regards, Joaquin Perez extension 2199 Intelligently Defining Aviation TM 1 P a g e
GA Telesis, LLC 1850 NW 49 th Street Fort Lauderdale, FL 33309 Tel: +1 954 676 3111 Fax: +1 954 676 9998 To Requestor: In an effort to serve our customers and suppliers more efficiently, we have developed
QUALITY ASSURANCE MANUAL
QUALITY ASSURANCE MANUAL REVISION 1.0 JANUARY 12, 2014 DYESS AVIATION, INC. 2000 W. BEND DR. GEORGETOWN, TX 78626 Dyess Aviation, Inc. Quality Assurance Manual Policy & Procedures Quality Management Introduction: