IND-GEFCO, INC. 7/15/2015 GENERAL TERMS AND CONDITIONS OF SALE - GEFCO WEDNESDAY, JULY 15, 2015

Transcription

1 GENERAL TERMS AND CONDITIONS OF SALE - GEFCO WEDNESDAY, JULY 15, 2015 ORDER OF SALE: ITEMS WILL BE SOLD IN NUMERICAL ORDER. It will be at the discretion of the Auctioneer to sell items out of sequence, divide or consolidate lots. REGISTRATION: By registering as a Bidder and/or participating as a Bidder at the auction sale Bidder is bound by the Terms & Conditions set forth herein and announced on the day of sale. Bidder agrees that such Terms & Conditions are binding on the Bidder whether or not the Bidder was present and/or heard such announcements. Bidder agrees that Auctioneer is in control of the conduct of the auction sale and has the right to reject any bid by any Bidder at the auction sale. It is at the sole discretion of the Auctioneer as to whether or not any bid is in conformity with the Terms & Conditions of the auction sale. Furthermore, Auctioneer may refuse to accept a bid whenever, in his sole discretion bid is not in good faith or Bidder appears to be under the influence or have some incapacity at time of sale. ALL PERSONS must be registered to bid and will be identified by number to facilitate the speed of the auction. TIE -BIDS Auctioneer will rule in case of "TIE" Bids. In the event of a TIE BID or any uncertainty as to offered last and highest bid the Auctioneer has a right to resolve any such at the time by accepting the Bid that the Auctioneer believes is in good faith and was the last, highest and best bid. Auctioneer may open the bidding between the parties at his discretion and option and such decision will be final and binding on affected parties. SALES TAX: Sales tax will be collected if applicable. Dealers can present Resale Certificates. REMOVAL: Auctioneer and Seller assume no responsibility for items left on sale site at sale's conclusion. Buyer is URGED to REMOVE ITEMS as soon as possible or to self insure for potential loss. Removal will be until 5:00 pm today or 1-hour following the sale, whichever is later. Additional Removal: 8:00AM-4:00PM Thursday, July 16th, Friday, July 17th and Monday, July 20th. From Tuesday, July 21 through Thursday July 30th removal will be BY APPOINTMENT ONLY at both locations. ALL ITEMS MUST BE REMOVED BY July 30th at both locations "NO EXCEPTIONS". Two Locations: 9600 Corporate Park Drive, Loudon, TN S. Van Buren Street, Enid, OK NOTICE TO INSPECT "AS_IS WHERE IS": Auctioneer presents all information in brochures, catalogs, and other advertisements from sources believed to be accurate. These are representations of the Auctioneer. Prospective Buyers should inspect all items to their own satisfaction. "BUYER BEWARE" Items are available for public inspection and the foregoing are merely guides. ALL ITEMS are being sold AS IS-WHERE-IS with no warranty or guarantee-actual or implied. TERMS: A 15% Buyer's Premium will be collected, an additional 18% Buyer's Premium for Online Bidders. Payment must be made in full day of sale by CASH, WIRE TRANSFER, CASHIER'S CHECK or COMPANY CHECK if Accompanied by BANK LETTER of GUARANTY, CREDIT CARDS to include: MASTERCARD or VISA ONLY. After an item has been sold, it becomes the sole responsibility of the Purchaser. No items can be removed until complete settlement has been made. Settlement can be made at any time during the sale. Settlement must be made today and an invoice with the paid item receipt will be supplied to the Purchaser upon settlement. The PAID receipt ticket will be required in order to remove items from the site. All checks should be made payable to. "ALL SALES ARE FINAL" ONLINE BIDDING TERMS: Online Bidders should review the "Online Terms & Conditions" in detail and will be held to those terms. SAFETY DEVICES: Items purchased may not incorporate approved activating mechanisms, operating safety devices or safety guards as required by law. It is Purchaser's responsibility that items purchased be so equipped and safeguarded to OSHA and any other requirement before placing items into operation. All Riggers, Contractors or Buyer's conducting specialized removal must provide a "Certificate of Insurance" with a minimum $1 million total liability and naming and Seller as "LOSS PAYEE". Qualified and Insured Riggers must perform removal of items that may affect the Real Property. Damage responsibility will be the responsibility of the Riggers and Buyers of item removed. Rigging and Removal is the responsibility of the Buyer. All removal activity must be in accordance with OSHA Guidelines and Standards. Removal may begin when auction has concluded and complete payment has been made. Onsite & Approved Rigger: DACCO Mechanical - Dave Cook

2 Page: 2 1 (3) Mechanics Creepers 2 (3) Mechanics Creepers 3 (6) Pneumatic Hammers 4 (5) Pneumatic Tools,2 Ratchets,2 Grinders, Hammer 5 (6) Pneumatic impact drivers 6 (6) 1/2" Pneumatic Impact Wrenches 7 (6) 1/2" Pneumatic Impact Wrenches 8 (6) 1/2" Pneumatic Impact Wrenches 9 (6) 1/2" Pneumatic Impact Wrenches 10 (6) 1/2" Pneumatic Impact Wrenches 11 (6) 1/2" Pneumatic Impact Wrenches 12 (6) 3/4" Pneumatic Impact Wrenches 13 (4) 3/4" Pneumatic Impact Wrenches 14 (4) Pneumatic Grinders 7 1/2" 15 Yard Machine 3.5hp Gas Edger 16 Tool Box with Contents, Wrenches, Screw Drivers, Chisels etc Ton Hyd. Floor Jack 18 Hougen Rotabroach Magnetic Base 19 Dana T-462 Portable Hose Crimper 20 Gates Model 205 Hose Saw 21 Enerpac 1.5hp Hyd Power Unit 22 Enerpac Foot Pedal and 10 ton Ram 23 (2) Metal Work Tables on Casters (1) 48'X72", (1) 42"X96" 24 Portapower Kit 25 Ram Power Portapower Kit 26 Greenlee 777 Portable Hydraulic Bender 27 Ridgid 1822 Pipe Threader w/ Die, Cutter and Reamer 28 Ridgid 1/8" to 6" Tristand 29 Ridgid 1/8" to 5" Tristand 30 HEM-Saw Mdl. 1200A Automatic Horizontal Bandsaw 31 HEM-Saw Mdl. 1200A Automatic Horizontal Bandsaw S/N (4) Boxes Bandsaw Blades, (3) 15'x1 1/4" 042 6/4, (1) 14'6"x 1" 035 6/4 33 Barber-Coleman Gear Hobber S/N Sector Technology 72"X120" Burner Table w/ Torch and Sector Controls 35 Fellows Mdl 6 Gear Shaper 18" Max Diameter 5" Face Gates GC32-XD Hyd. Hose Crimper S/N SA0114F05 w/tooling 37 Gates PC 707 Power Crimper w/dies 38 Aeroquip Mdl. A Hose Crimping Machine 39 Aeroquip Mdl. A Hose Crimping Machine 40 Dies for Aeroquip Mdl. A Hose Crimpers 41 Aeroquip Mdl O Hose Cut Off Machine 3"- 48" 42 Clausing 2 Head Vertical Drill Press 24" X 72" Table 43 Panasonic PanaRobo Mdl. YA1FAR81 Welding Robot w/2 Panasonic YA1AJB21 Weld Positioners and Panasonic Dip-Pulse Mig HM500 Weld Controller 44 Panasonic HM500 Dip-Pulse Mig Welder

3 Page: 3 45 Panasonic HM500 Dip-Pulse Mig Welder 46 Panasonic HM500 Dip-Pulse Mig Welder 47 Weld Positioner Table 47A (2) Weld Jig Clamps 48 Beckwood Hydraulic Power Units Beckwood Hydraulic Power Units 49 Beckwood Hydraulic Power Units Beckwood Hydraulic Power Units 50 Beckwood Hydraulic Power Units Beckwood Hydraulic Power Units 51 Beckwood Hydraulic Power Units Beckwood Hydraulic Power Units 62 (14) Cat 50 Tool Holders w Tooling Cutters Drills etc. 63 (2) 8" 3 Jaw Dividing Heads 64 End Mill Tooling 65 Carbide Inserts 66 Tapered Tool Holders w/ Tooling 67 Machine Hold Downs T-Nuts, Allthread, Bolts etc. 68 (2) Trays Large Drill Bits, Tapered and Straight Shank 69 (5) Trays Mill Cutters, Drill Bits etc. 70 No. 84 Counterbore Set 51A 51B 10' x 12" Power Conveyer 10' x 12" Power Conveyer 10' x 12" Power Conveyer 10' x 12" Power Conveyer 71 Machine Hold Down Set 72 (3) 10" V-blocks 73 8" Jaw Machinist Vise 52 Balliu LC 2000 Laser, Siemens Controls, PRC 3500 Laser 3500 watt, (2) 84" X 120" Load Tables 53 Koolant Koolers Mdl. HCV15, 100-2P, 15hp Chiller S/N Balliu LC 2000 Laser, Siemens Controls, PRC 3500 Laser 3500 watt, (2) 84" X 120" Load Tables (needs repair) 56 Koolant Koolers Mdl. HCV15, 100-2P, 15hp Chiller S/N Torit Mdl. DF hp Down Flow Dust Collector Turret Mdl. CHL26120 CNC Lathe w/ Fanuc Series O-T Controls, Heavy Duty 3 Axis, 26" Swing, 120" Between Centers 59 Cabinet and contents, Tooling, Tool Holders and Cutters for Lathe 60 Giddings and Lewis Horizontal Boring Mill, Type 350T, 60" X 120" Table S/N (2) 61" X 24" Angle Plates 90 Degree 74 6" Jaw Machinist Vise 75 8" Jaw Vise 76 C-clamps, hold downs Etc.. 77 Metal Wood Topped Table 30X72 78 Heavy Duty Parts Shelf 78"X50"X26" 79 Heavy Duty Rack On Casters 34"X60"X14" 80 Metal Work Table 24"X60" 81 Cincinnati 9 Series Press Brake 12'X150 Ton S/N 33180, LOCATED IN ENID, OK. 82 Cincinnati Mdl Hyd. Shear 3/8" X 8' S/N 34506, LOCATED IN ENID, OK 83 Cincinnati Mdl. 3DL12 Hyd Squaring Shear 3/8 X 12' S/N 38958, LOCATED IN ENID, OK.

4 Page: 4 84 Astec Maxi-Sneaker Trencher Plow 36 Hrs. S/N RTM-SXX Tenant Model 7400 Ride On Sweeper 86 Hyster Model R30CH Order Picker, 3000 Lbs., S/N A186DO1933U - NEEDS BATTERY 106 Bishamon Lift Table 48"X96" 107 Bishamon Lift Table 24"X42" 108 Shop Press Electric/ Hydraulic 109 Master Cut Horizontal Band Saw MDL S-12a W/Power Roller Feed 87 Toyota Electric Forklift 2500 lb. (NEEDS BATTERY) 88 Magnetic Lift Blocks 89 O.S. Walker Model BM Lift Magnet 90 O.S. Walker 6000 lb. Lift Magnet 91 O.S. Walker Model BM Lift Magnet 92 O.S. Walker 8000 lb. Lift Magnet 93 Lift Table 36"X48" 94 Pandjiris Weld Positioner 95 Astec Underground Mud Mixer Attachment Mdl FM Walton/ Stout S.S. Portion Hopper 97 Delta 2 Bag 3 HP Dust Collector 98 Brundi Box Pallet Forks 99 Sealed Air Corporation Speedy Packer System ( Foam Packing System ) 100 Uline Bagger/ labeler MDL SX 101 Alkota Electric Pressure Washer MDL Hydrotec Electric Pressure Washer 103 Arbor Press 104 Pexto Edger MDL 622LR 105 Pedestal Grinder 110 Roller Feed Table 18"X120" 111 Sigma 5HP Hyd Power Unit W/Impact Gun 112 Sigma 5HP Hyd Power Unit 113 Romac 10HP Hyd Power Unit 114 Rigging 6 Chains, Lift Clamps, Straps, ECT 115 A-Frame Rigging Rack 116 Rack And Contents Bar Clamps 117 Rack And Contents Custom Clamps 118 C-Clamps Various Sizes 119 Contents Rack, Bolts, Nuts, Cap Screws 120 Contents Rack, Bolts, Nuts, Cap Screws 121 Contents Rack, Bolts, Nuts, Cap Screws 122 Contents Rack, Bolts, Nuts, Cap Screws 123 Parts Cart on Casters 24"X60"X36" 124 Parts Cart on Casters 24"X60"X36" 125 Parts Cart on Casters 24"X60"X36" 126 Parts Cart on Casters 24"X60"X36" 127 Contents Parts Rack, Hose Fittings, Reducers, Elbows, 4 ways Etc Contents Parts Rack, Bolts, Washers, Clamps, Etc.

5 Page: Contents Parts Rack, Pipe Fittings, Elbows, T's, Caps, Etc. 130 Contents Parts Rack, Filters, Door Handles, Etc Hyd Hose Fittings, Elbows, T's, Reducers, Etc Hose Fittings, Pipe fittings, Etc Contents Parts Rack, Bolts, Washers, Clamps, Etc. 134 Contents Parts Rack, Bolts, Washers, Clamps, Etc. 135 Contents Parts Rack, Bolts, Washers, Clamps, Etc. 136 Contents Parts Rack, Bolts, Washers, Clamps, Etc. 137 Contents Parts Rack, Valves, Hose fittings, Etc Contents Parts Rack, Hyd. Hose Fittings 139 Contents Parts Rack, Bolts, Washers, Etc. 140 Contents Parts Rack, Bolts, Washers, Etc. 141 Contents Parts Rack, Bolts, Washers, Etc. 142 Parts Rack On Casters 26"X48"x 78" 143 Parts Rack On Casters 26"X48"x 78" 144 Parts Rack On Casters 26"X48"x 78" 145 Parts Rack On Casters 26"X48"x 78" 146 Parts Rack On Casters 26"X48"x 78" 147 Parts Rack On Casters 26"X48"x 78" 148 Parts Rack On Casters 26"X48"x 78" 149 Parts Rack On Casters 26"X48"x 78" 150 Parts Rack On Casters 26"X48"x 78" 151 Parts Rack On Casters 26"X48"x 78" 152 Parts Rack On Casters 26"X48"x 78" 153 Parts Rack On Casters 26"X48"x 78" 154 Parts Rack On Casters 26"X48"x 78" 155 Parts Rack On Casters 26"X48"x 78" 156 Parts Rack On Casters 26"X48"x 78" 157 Contents Parts Rack, Bolts, Nuts, Washers, Etc Contents Parts Rack, Valves, Washers, Parts, Etc Contents Parts Rack, Bolts, Nuts, Etc Contents Parts Rack, Various Size Bolts, Nuts, Washers, Etc Contents Parts Rack, Various Size Bolts, Nuts, Washers, Etc Contents Parts Rack, Various Size Plastic Block, Etc Parts Rack, 26"X48"x 76" 164 Parts Rack, 26"X48"x 76" 165 Parts Rack, 26"X48"x 76" 166 Parts Rack, 26"X48"x 76" 167 Parts Rack, 26"X48"x 76" 168 Parts Rack, 26"X48"x 76" 169 Parts Rack, 26"X48"x 76" 170 (3) Partial Spools Parker 40/20 hose 171 (3) Partial Spools Hose, (2) 3/8", (1) 3/4" 172 (3) Spools Parker Hi Temp Hose 1", 1000 PSI 173 (4) Spools Hose (1) Parker 3/4" 4000 PSI, (1) 1/2" 3500 PSI, (1) 1/2" 350 PSI, (1) 3/8" 3000 PSI

6 Page: (3) Spools Hose, (1) 5/8" Braided 1500PSI, (1) 1/4" 3000 PSI, (1) 1/4" 3250 PSI 175 (4) Spools Hose, (2) Parker Braided 2000 PSI, (1) 1/2" 3500PSI, (1) 1/4" 176 (4) Spools Hose, (3) 1/4" 3250 PSI, (1) (5) Spools Hose, (3) 1/2", (2) 3/4" 178 Parker Tough Cover 25mm 5000PSI 179 (3) Spools Hose, (2) 1/4" 300 PSI, (1) Goodyear Flex Wing. 180 (6) Spools Hose, 1" 4000PSI 181 (2) Spools Hose, 1" 4000PSI 182 (2) Spools Hose, 1" 4000PSI 183 Contents of Pallet Various Size Electrical Wire 184 Contents of Pallet Various Size Electrical Wire 185 Contents of Pallet Various Size Electrical Wire 186 Contents of Pallet Electrical Wire, Battery Cables 187 (3) Boxes PVC Pipe 6" and 10" 188 (2) Pallets Conduit Various Size 189 Contents of Pallet Various Size Plastic Parts Bins 194 Contents of Pallet Various Size Plastic Parts Bins 195 Contents of Pallet Various Size Plastic Parts Bins 196 Contents of Pallet Various Size Plastic Parts Bins 197 Contents of Pallet Various Size Plastic Parts Bins 198 Contents of Pallet Various Size Plastic Parts Bins 199 Contents of Pallet Various Size Plastic Parts Bins 200 Contents of Pallet Various Size Plastic Parts Bins 201 Contents of Pallet Various Size Plastic Parts Bins 202 Contents of Pallet Various Size Plastic Parts Bins 203 Contents of Pallet Various Size Plastic Parts Bins 204 Contents of Pallet Various Size Plastic Parts Bins 205 Contents of Pallet Various Size Plastic Parts Bins 206 Contents of Pallet Various Size Plastic Parts Bins 207 Contents of Pallet Various Size Plastic Parts Bins 190 Contents of Pallet Various Size Plastic Parts Bins 208 Contents of Pallet Various Size Plastic Parts Bins 191 Contents of Pallet Various Size Plastic Parts Bins 209 Contents of Pallet Various Size Plastic Parts Bins 192 Contents of Pallet Various Size Plastic Parts Bins 210 Contents of Pallet Various Size Plastic Parts Bins 193 Contents of Pallet Various Size Plastic Parts Bins 211 Contents of Pallet Various Size Plastic Parts Bins

7 Page: Contents of Pallet Various Size Plastic Parts Bins 213 Contents of Pallet Various Size Plastic Parts Bins 214 Contents of Pallet Various Size Plastic Parts Bins 215 Contents of Pallet Various Size Plastic Parts Bins 216 Contents of Pallet Various Size Plastic Parts Bins 233 Metro Rack on Casters 36" X 72" X 84" 234 (9) 48" X 96" Sheets of Lexan 235 (2) Stackable Metal Pallets 236 (7) Roll Formed Sheets of Fender Material 237 Cummins 4cyl Diesel Engine 238 Torque Hub Part Number UA (2) Sauer Danfess Mdl. 51C060 Bent Axis Variable Displacement Motors 217 Contents of Pallet Various Size Plastic Parts Bins 218 Wire Basket 219 Metal Stackable Pallet 220 Contents of 3 Pallets Plastic Parts Bins 221 Contents of 3 Pallets Plastic Parts Bins 222 Plastic Folding Pallet/Crate 223 Plastic Folding Pallet/Crate 224 Plastic Folding Pallet/Crate 225 Plastic Folding Pallet/Crate 226 Plastic Folding Pallet/Crate 227 Plastic Folding Pallet/Crate 228 Plastic Folding Pallet/Crate 229 Plastic Folding Pallet/Crate 230 Plastic Folding Pallet/Crate 231 Plastic Folding Pallet/Crate 232 Metro Rack on Casters 24" X 60" X 72" 240 Contents of Crate Pipe Fittings and Valves 241 Torque Hub Part Number F360 VSG 242 Contents of Pallet, Filters, Pulleys, ECT 243 (6) Proportioning Valves 244 Large Bearing, Gears, Splined Axles 245 Electrical Fittings and Terminals 246 Parker Hose Wrap 247 Cox Reels Hose Reel 248 Sauer/Danfoss Variable drive Motor 249 (5) Sauer/Danfoss Variable drive Motor 250 Torque Hub Mdl S12B2002K 251 Torque Hub Mdl S12B2002K 252 Torque Hub Mdl S12B2002K 252A (4) Hyd Cylinders 253 Sauer/Danfoss Mdl (2) Variable Drive Motors 255 (2) Variable Drive Motors

8 Page: Sauer/Danfoss Mdl (5) Sauer/Danfoss Variable drive Motor (3) KVEBB0504, (1) KVEBB0704, (1) No Plate 258 (1) Section Pallet Racking 36"X96"X96" 259 (1) Section Pallet Racking 42"X102"X64" 260 Bolt Bin W/Contents Set Screws, Cap Screws, ETC 261 (2) Sections Adjustable Shelving 24"X96"X (8) Boxes (6) Washers, (2) 5/16" Single End Rod 263 (10) Boxes Threaded Rod, Handle Bar grips 264 (8) Boxes Threaded Rod, Bolts 265 (13) Boxes Hose Clamps, Bolts, Lock Nuts, Etc. 266 Contents Of Shelf Lock Washers, Bolts, Snap Rings 267 Contents of Shelf Threaded Rod, Nuts 268 Contents of Shelf Threaded Studs, Lock Flanges, Harness Clamps 269 Contents of shelf, Cap screws, Threaded Studs, 270 Contents of Shelf, Washers, Threaded Rod, Springs Etc. 271 Contents of Shelf, Retaining Rings, Pins, Etc. 272 Contents of Shelf, Washers, Pins, Hose Clamps, Pipe clamps 273 Contents of Shelf, Bolts, Pins, Washers 274 (4) Sections Adjustable Shelving, 24"X96"X84" Drawer Locking Cabinet 24"X36"X84" Drawer Locking Cabinet 24"X36"X84" 277 Material Cart W/Contents, Misc. Cleaning, Oil, Etc. 278 Contents of Pallet (13) Fuel Cans 279 Contents of Pallet, Air Filters, Oil Filters, (9) Oil Catch Cans 280 Contents of Pallet, Air Hose 281 Contents of Pallet, Floor Mats, Anti Fatigue Mats 282 Contents of Pallet, Hollowell Locker, Floor Cable Router 283 Contents of Pallet, Anti Fatigue Mats 284 (3) Water Coolers, Box of Hard Hats 285 (10) 5Gallon Containers Royal Purple CMT 50 Oil 286 Contents of Pallet, Brooms, Dust Pans 287 (30) Trash Cans 288 Reelcraft Hose Reel 289 (3) Carlisle 26C12.00X12 Turf Tires on Wheels 290 (3) Microwave Ovens 291 Spill Containment Pallet 292 Spanco 3 Ton 18' Span 12' Tall Jib 293 Ace 1Ton 18' Span 12' Tall Jib 294 Ace 1Ton 18' Span 12' Tall Jib 295 Flammable 2 Door Storage Cabinet 16"X42"X48" 296 Flammable 2 Door Storage Cabinet 16"X42"X48" 297 Flammable 2 Door Storage Cabinet 12"X42"X42" 298 Flammable 2 Door Storage Cabinet 16"X42"X68" 299 Flammable 2 Door Storage Cabinet 16"X42"X68" 300 Flammable 2 Door Storage Cabinet 16"X42"X68"

9 Page: Flammable 2 Door Storage Cabinet 16"X42"X68" 302 Flammable 2 Door Storage Cabinet 16"X42"X68" 303 Flammable 2 Door Storage Cabinet 36"X60"X68" 304 Metal Welding Table W/ 6" Jaw Vise 60"X120" 305 Metal Welding Table W/ 6" Jaw Vise 60"X120" 306 Metal Welding Table W/ 6" Jaw Vise 60"X120" 307 Metal Welding Table W/ 4" Jaw Vise 48"X60" 308 Metal Work Table W/2 Door Cabinet 32"X72" 309 (2) Metal Work Tables 32"X72" 310 (2) Metal Framed Wood Topped Tables 28"X72" 311 Metal Welding Table W/4" Jaw Vise 60"X120" 312 Heavy Duty Metal Jig Table 60"X96" 313 (3) Angle Plates (1) 4"X8", (1) 3"X9" (1) 2.5"X7.75 " 314 (2) Angle Plates (1) 8"X18", (1) 6"X12" 315 (2) Angle Plates 6"X20" 316 Metal Welding Table 60"X96" 317 Metal Welding Table 72"X120" 318 Metal Welding Table 96"X120" 319 Metal Welding Table 60"X144" 320 Metal Welding Table 72"X120" 321 Metal Welding Table 72"X108" 322 Metal Welding Table 84"X120" 323 Metal Welding Table 96"X112" 324 Metal Welding Table 60"X120" 325 Metal Welding Table 48"X72" 326 Wire or Hose Spool Rack 3 Tier 120"X60" 327 (1) Section Roller Conveyer Flow Rack 48"X48"X60" 328 (1) Section Shelving 24"X120"X60" 329 Custom Metal Storage Cart 330 Towable 3 Tier Cart 36"X96" 331 Towable 3 Tier Cart 36"X96" 332 Various Size All Thread 333 Metal Cart 48"X72' 334 Metal Cart 36"X72" 335 Metal Cart 24"X84" 336 (2) Metal Shop Carts 24"X48" 337 (2) Metal Shop Carts 24"X48" 338 System 20 Hydraulic Systems Condition Monitor 339 (2) Accumulator Charge Kits 340 OTC Vacuum Pump Kit 341 Pressure Gauges in 2 Boxes 342 Shimpo Digital Stroboscope, Test Equipment, Etc. 343 Metal Shop Cart 24"X48" 344 Custom Metal Rack on Casters 18"X48" 345 Custom Metal Cart 24"X48" 346 (4) Motorola Radios (1) Base, (3) Portable 347 OilCans, Caulk Guns, Etc.

10 Page: (3) Metal Shop Carts 349 (2) Metal Shop Carts 350 (2) Metal Shop Carts 351 (2) Metal Shop Carts 352 (1) Custom Metal Shop cart 353 (4) Powder Coating Carts 354 (2) Cantilever Carts 24"X34"X60" 355 (3) Cantilever Carts 24"X34"X60" 356 (3) Cantilever Carts 24"X34"X60" 357 (2) Rubbermaid Carts 358 (2) Rubbermaid Carts 359 (2) Rubbermaid Carts 360 (2) Rubbermaid Carts 361 (3) Rubbermaid Carts 362 (4) Paper/ Tape Reel Carts 363 (4) Cloth Material Baskets on Casters 364 AC Servo Motors, Parts for Panasonic Welding Robot 365 Panasonic Welder Parts and Accessories 366 (6) Weld Curtains 367 Contents of Pallet Weld Curtain Material 368 (4) Binzel Mig Welding Leads 369 (4) Binzel Mig Welding Leads 370 (4) Binzel Mig Welding Leads 371 (5) Binzel Mig Welding Leads 372 Welding Supplies, Torch, Welding Wire, Leads, Regulators 373 Welding Cart W/ Hoses and Torch 374 Partial Box Lincoln Superarc.045" L-59 Welding Wire 375 Box Lincoln Superarc.035 L-59 Welding Wire 500lbs Approx. 376 Box Lincoln Superarc.035 L-59 Welding Wire 500lbs Approx. 377 Thermal Transfer MDL AO-40 Heat Exchanger 280/460 Volt 378 Thermal Transfer MDL AO-40 Heat Exchanger 280/460 Volt 379 Thermal Transfer MDL AO-40 Heat Exchanger 280/460 Volt 380 Young MDL OCS 1000 Cat Heat Exchanger 15HP 280/460 Volt 381 Thermal Transfer MDL AOL Heat Exchanger 280/460 Volt 382 Warehouse Steps 10' 383 Warehouse Steps 5' 384 Warehouse Steps 7' 385 Warehouse Steps 4' 386 Warehouse Steps 4' 387 Warehouse Steps 3' 388 Warehouse Steps 3' 389 Warehouse Steps 3' 390 Warehouse Steps 3' 391 (3) Sets 3' Metal Steps

11 Page: (3) Sets Metal Steps (2) 3' (1) 2' 393 (3) Sets Metal Steps (1) 4' (1) 2' (1) 3' 394 (3) 2 Wheeled Dollies 395 (2) Pedestal Fans 24" 396 (2) Pedestal Fans (1) 30", (1) 24" 397 (2) Pedestal Fans 24" 398 (2) Pedestal Fans 24" 399 (2) Pedestal Fans 24" 400 (2) Pedestal Fans 24" 401 (3) Pedestal Fans 24" 402 (3) Fans 424 Double Sided A-Frame Parts Cart, 54" x 36" x 60" 425 Double Sided A-Frame Parts Cart, 54" x 36" x 60" 426 Double Sided A-Frame Parts Cart, 54" x 36" x 60" 427 Double Sided A-Frame Parts Cart, 54" x 36" x 60" 428 Parts Cart 24" x 36" x 60" 429 Parts Cart 24" x 36" x 60" 430 Parts Cart 24" x 36" x 60" 431 Parts Cart 24" x 36" x 60" 432 (1) Section Pallet Racking 36" x 126" x 120" 433 (1) Section Pallet Racking 36" x 120" x 240" 434 Parts on Shelving, Bolts, Nuts, Washers, Screws 435 Parts on Shelving, Bolts, Nuts, Washers, Screws 436 Parts on Shelving, Pipe Fittings and Hose Fittings, Elbows, Nipples and Reducers 437 Parts on Shelving, Pipe Fittings and Hose Fittings, Elbows, Nipples and Reducers 438 Parts on Shelving, Pipe Fittings, Bolts, Nuts, Cap Screws 439 Parts on Shelving, Bolts, Nuts, Clamps, Flanges 440 Wire Parts Shelve 24" x 120" x 56' 441 Wire Parts Shelve, 24" x 120" x 80' 442 Wire Parts Shelve, 24" x 120" x 80' 443 Wire Parts Shelve, 24" x 120" x 56' 444 Wire Parts Shelve, 24" x 120" x 56' 445 Wire Parts Shelve, 24" x 120" x 80' 446 Wire Parts Shelve, 24" x 120" x 80' 452 (1) Section Metro Shelving 36" x 72" x 84" 453 (1) Section Metro Shelving 36" x 72" x 84" Yard Dump Hopper Yard Dump Hopper Yard Dump Hopper Yard Dump Hopper Yard Dump Hopper Yard Dump Hopper 460 Orange Box Dump Hopper 461 (20) Custom Tool Racks 462 (2) 50,000lb Screw Jacks 463 (3) Screw Jacks

12 Page: (3) Screw Jacks 465 (3) Pipe Jacks 466 (4) Pipe Jacks 467 (3) Screw Jacks 468 (3) Pipe Roller Stands 469 (3) Pipe Jacks 470 (5) Jack Stands 471 Contents of Pallet (6) Manual Barrel Pumps, (2) Electric Pumps 472 (1) Section of Pallet Racking 48" X 132" X 48" 473 (2) Skate Conveyor Tables (1) 62" X48", (1) 38" X 24" 474 Metal Welding Table 48" X 120" 475 Metal Work Table 24" X 72" 476 (3) Metal Work Tables (1) 48" X 48", (1) 24" X 36", (1) 18" X 18" 477 (4) Metal Work Tables (3) 48" X 48", (1) 24" X 36" 486 Metal Work Table 24" X 36" 487 (2) Metal Work Tables 36" X 48" 488 (2) Metal Work Tables 36" X 48" 489 (1) Metro Shelf on Casters 24" X 60" X 66" 490 (2) Metal Foreman Work Stations 491 Lighted Metal Framed Wood Topped Work Table 28" X 60" 492 Rubbermaid Work Table 24" X 48", (2) Metal Work Tables 24" X 36" 493 (3) Hanging Plan Files on Casters 494 (5) 4 Drawer Metal File Cabinets 495 (2) Metal Foreman Work Stations 496 (2) Metal Foreman Work Stations 497 (2) Metal Foreman Work Stations 498 (3) Custom Cabinets on Casters 499 (5) Pallets of Scrap Metal 500 (3) Metal 2 Door Storage Cabinets, 18" X 36" X 78" 478 Test Cabinet on Casters w/contents Torque Wrench and Impact Sockets 501 (4) Metal 2 Door Storage Cabinets, 18" X 36" X 78" 479 Metal Work Table 36" X 48" 480 Metal 2 Door Storage Cabinet 24" X 48" X 68" 481 Metal 2 Door Storage Cabinet 24" X 48" X 68" 482 Metal 2 Door Storage Cabinet 24" X 72" X 36" 483 Metal 2 Door Storage Cabinet 24" X 48" X 72" 484 Metal 2 Door Storage Cabinet 24" X 48" X 64" 485 Metal Cabinet 24" X 48" X72" 502 (3) 6 door Lockers, (2) Adjustable Metal Shelves 503 Tennant Castex Mdl Floor Maintainer 504 (4) Wet Dry Vacuums 505 (4) Wet Dry Vacuums 506 (3) Sets of Lockers, (2) 6 Door, (1) 4 Door 507 (6) Metal 2 Door Storage Cabinets 508 (12) Task Arm Chairs

13 Page: (3) Brake Stools, (3) Drafting Stools