Computer Servo Control Tensile Tester
|
|
- Homer McDonald
- 6 years ago
- Views:
Transcription
1 Computer Servo Control Tensile Tester (Including computer) Product Description: This series of Tensile Tester is widely used in wires & cables, hardware, metal, rubber, footwear, leather, apparel, fabric, tape paper products, pharmacy and so on, for tensile strength, tear resistance, peel strength, bend strength, shear force with different fixtures according to national and international standards and customer requirement. This machine is a kind of electric tensile tester which uses the motor to drive ball screw to move fixture. Place the fixture with sample between the upper and lower fixture, use a given speed to pull sample upward by upper fixture. Load cell above upper fixture will sense tensile strength, and convert the strength into voltage sign and output to the display screen. And the strength value will be displayed automatically. Product Pictures: HD-B604-S HD-B605S Contact: Ms. Sandy Yuan sales01@qc-test.cn 2
2 Main Technical Parameter Items HD-B604-S Specification HD-B605S Max. Stroke 1000mm (excluding grip) 1100mm (excluding grip) Testing width 400mm 410mm Motor Specimen Taiwan 400W servo motor Yellow brass wire Ø3mm - Ø0.13mm Japan imported Panasonic 400W servo motor Control method Sensor Capacity Computer control Imported transcell load cell 0-1T (optional) Unit Switchover Display Device G, KG, N, LB Resolution 1/250,000 Accuracy ±0.5% PC display (can display and print the number of test times, test value, the max. value, break value ) Test Speed 0-500mm/min (adjustable ) Screw rod Software Power Imported high precise ball screw rod TM2101 AC220V, 50/60Hz, single phase Weight 200kg 220kg Machine size 880*510*1490mm 750*650*2250mm Accessories One set tension grip; One set Lenovo computer; One piece English software CD; One piece operation video CD; One piece English user manual Contact: Ms. Sandy Yuan sales01@qc-test.cn 3
3 Product Features: 1, Motor system: Servo motor +Servo driver +High precise ball screw 2, Control system: a, computer control with TM2101 software; b, back to origin automatically after the test, c, store data automatically or by manual operation 3, Data transmission: RS232 4, Displacement resolution: 0.001mm 5, Graph scale automatic optimization can make graph to display with best measurement and can implement graphics dynamic switching in the test and has force-elongation, force- time, elongation -time, stress - strain. 6, It can save results automatically after test finished, and it is manual filing. It can display maximum force, yield strength, compressive strength, tensile strength, elongation; peel interval maximum, minimum and average value, etc. 7, User can set parameters of product material such as length, width, thickness, radius, area and so on. 8, Languages: English. 9, Display Method: PC Product Components: Servo motor Driver of servo motor High precision screw rod High elastic shield Contact: Ms. Sandy Yuan sales01@qc-test.cn 4
4 Software and Curves The TM2101 software is designed purposely for computer controlled electronic universal testing machine, used for tension, compress, bend, shear, tearing and peel test. With the personal computer and interface plate, it could collect, save, process and print test result. Further it can calculate multiple parameters, i.e. maximum force, yield strength, average peel force maximum deformation, yielding point and elastic modulus; this system is featured in curve process, multi-sensor support, image interface, flexible data process and powerful system function. Contact: Ms. Sandy Yuan 5
5 Fixture Image: Contact: Ms. Sandy Yuan 6
6 Quality Assurance 1) Quality assurance items The guarantee period is one year (consumer goods are not included) 2) The main quality warranty maintenance certificate If there is any dispute please refer to our guarantee letter, so: 1 please keep this guarantee letter, if you lost it; please connect with us in a month. 2 If this guarantee letter has been altered or it has no our stamp, it is useless. 3) The following conditions need to pay reasonably even in the assurance period: 1 Natural reasons 2 Operating mistakes 3 Voltage is not fit for our operation instruction 4 Repack it without our guides 5 Damaged for borrowing to others 6 Damaged for authorized machine modification 7 Damaged for authorized calibration 8 Authorized transshipment mistake 9 Serve for long distance area 4) Attentions: Any service outside Guangdong, transport and travel fees shall be paid by the customer. Contact: Ms. Sandy Yuan sales01@qc-test.cn 7
7 海达国际仪器有限公司 HAIDA INTERNATIONAL EQUIPMENT CO., LTD Introduction: HAIDA INTERNATIONAL is a professional manufacturer of various kinds of testing equipments over 24 years. HAIDA products are widely used in paper products, packaging, ink printing, adhesive tapes, bags, footwear, leather products, environment, toys, baby products, hardware, electronic products, plastic products, rubber products and other industries, and applicable to all scientific research units, quality inspection institutions and academic fields. See what company you will work with? 1. Largest TESTING EQUIPMENT manufacturer in China, One of Second Largest TESTING EQUIPMENT manufacturer around the world. 2. A professional Manufacturer of various kinds of testing equipments over 24 years, defect rate is controlled under 0.02%. 3. Completely Production Line. From Raw Material to Delivery, all links are under our control. The quality can be assured. 4. ISO 9001:2008 Quality Management System Certificate. 5. OEM/ODM Service. Just tell us your idea! Our R&D Team is standing by 6. Our Marketing Investigation Department will send Marketing Research Report to you each season. 7. We are trusted by SCS, INTERTEK, HST, COFCO, ESC, KBMC, LENOVO, PANASONIC, EMC, BYD etc. 8. We accept 100% inspection. 9. Guarantee Period: 365 days, After Sales Service Department provide professional service with you, any questions, just contact us. Partners: Contact: Ms. Sandy Yuan sales01@qc-test.cn 8
8 View of Factory: Some of Certificates: Contact: Ms. Sandy Yuan 9
ECO INSTRUMENT (NS M)
Computerized AC Servo Control Universal Material Testing Machine Safety Protection Frame Rubber Type 180 degree grip or 90 degree peel fixture Bending Test Compression Test Specimen Gripping Fixture Product
More informationSERVO-HYDRAULIC UNIVERSAL TESTING MACHINE SERIES A
SERVO-HYDRAULIC UNIVERSAL TESTING MACHINE SERIES A RoboTest Series A Servo-Hydraulic Universal Testing Machine feature servo-valve control of hydraulic power to perform accurate and reliable tension and
More informationServo Hydraulic Universal Testing Machine. SHT4000G Series. Configuration
Servo Hydraulic Universal Testing Machine SHT4000G Series SHT4000G series especially for tensile test of steel strand wire with extra-length columns. Configuration SHT4000G series features servo hydraulic
More informationHSM58 Universal Material Tester 20kN
HSM58 Universal Material Tester 20kN Sturdy Ground Steel Pillars make unit robust for student or demonstration use Hand-operated hydraulic system enables manual control of loading for maximum precision
More informationTIME Group Inc. ISO9001 International Quality Certificate. Highway and Bridge Testing Machine
Highway and Bridge Testing Machine TIME GROUP INC. Export Department of Testing Machine 2009 YAW-5000J Computer Controlled Servo Hydraulic Compression and Shearing Testing Machine YAW-5000J Computer Controlled
More informationEngineering Materials
Engineering Materials PREPARED BY Academic Services August 2011 Institute of Applied Technology, 2011 Module Objectives After the completion of this module, the student will be able to: Explain the terms
More informationTrue Stress and True Strain
True Stress and True Strain For engineering stress ( ) and engineering strain ( ), the original (gauge) dimensions of specimen are employed. However, length and cross-sectional area change in plastic region.
More informationPreparation of RRT for Tensile Test on REBCO Tapes at Cryogenic Temperature
Preparation of RRT for Tensile Test on REBCO Tapes at Cryogenic Temperature Nadezda Bagrets 1, Klaus-Peter Weiss 1, Kozo Osamura 2, Hyung-Seop Shin 3 INSTITUTE FOR THECHNICAL PHYSICS (ITEP) 1 Institute
More informationDrop Weight Impact Testing Machine DIT183E 1800J
Do Our Best for Your Test Drop Weight Impact Testing Machine DIT183E 1800J Functions This type of machine is especially designed for drop-weight test of pipe and plate (including plastics, ceramic, Nylon,
More informationLow Temperature Testers
Low Temperature Testers For rubber materials there are four important standardised test methods for Low Temperatures. 1. TR test according to ISO 2921. This method determines the low temperature characteristics
More informationMerrimack and Suwannee ACSS/TW/HS285 Conductor Stress-Strain Tests. Southwire Company
Merrimack and Suwannee ACSS/TW/HS285 Conductor Stress-Strain Tests Southwire Company NEETRAC Project Number: 05-204 November, 2005 A Research Center of the Georgia Institute of Technology Requested by:
More informationUNIVERSAL Testing Machines
UNIVERSAL Testing Machines 700 1200 1500 2000 capacity Standards EN ISO 6982 EN ISO 7500-1 EN ISO 15630-1 ASTM A 370 Conforming to ISO, EN and ASTM Standards STEEL Tensile tests on steel rebars and rounds
More informationMelt tension measurement (Haul-Off)
Göttfert Werkstoff-Prüfmaschinen GmbH Siemensstraße 2 74722 Buchen Email: info@goettfert.de Internet: http://www.goettfert.com WERKSTOFF-PRÜFMASCHINEN GMBH Melt tension measurement (Haul-Off) The Haul-Off
More informationSTANDARD PROCEDURE: NWSP R0 (15) Breaking Force and Elongation of Nonwoven Materials (Strip Method)
STANDARD PROCEDURE: Breaking Force and Elongation of Nonwoven Materials (Strip Method) 1. Scope This test method covers cut strip test procedures for determining the breaking force and elongation of most
More informationBreaking Strength and Elongation of Pressure Sensitive Tapes
Harmonized International Standard Breaking Strength and Elongation of Pressure Sensitive Tapes Call Letters PSTC-131 Date of Issuance 09/55 Revised 04/66 Revised 11/70 Revised 08/85 Revised 08/89 Revised
More informationAutomatic Foam Hardness Tester. PC computer controlled. High specification
Automatic Foam Hardness Tester PC computer controlled High specification Why measure foam hardness? All foamers measure the density of their product. Not all foamers, however, measure foam hardness. Foam
More informationUniversal Test Systems. be certain.
MTS EXCEED Universal Test Systems be certain. COMBINING ADVANCED LOAD FRAME TECHNOLOGY WITH EASY-TO-USE TEST SOFTWARE AND A VARIETY OF ACCESSORIES, MTS EXCEED UNIVERSAL TEST SYSTEMS ARE DESIGNED HELP YOU
More informationBrinell Rockwell Vickers. Hardness Tester (Manual)
Brinell Rockwell Vickers Hardness Tester (Manual) Brinell Rockwell Vickers Hardness Tester (Electric) Brinell Hardness Tester (Electronic) Brinell Rockwell Vickers Hardness Tester MANUAL BRV-9000M Test
More informationMoisture Analyzers ISO 9000 CERTIFIED
Moisture Analyzers MS-70/MX-50 MF-50/ML-50 ISO 9000 CERTIFIED A&D's Moisture Analyzers MS-70 MX-50 SRA MF-50 ML-50 SHS Fast and uniform heating with halogen lamp and innovative SRA technology Straight
More informationRobbie Powell i (Youngs Modulus Lab Report) Page 1
Abstract In this report I explain a recent experiment aimed at finding out the Youngs Modulus, Ultimate tensile strength and elastic limit, total elongation and total reduction section in cross section
More informationA PRODUCT FROM KANTAFLEX (INDIA) PVT LIMITED
ELASTOMERIC BRIDGE BEARING TO LATEST IRC: 83-015 (PART - II) Kanta System of Elastomeric bridge bearing is made out of Poly chloroprene rubber having low crystallization rates and adequate shelf life,
More information477 kcmil, 3M Brand Composite Conductor Mechanical Properties, Volume 1 Tensile and Stress-Strain Tests
477 kcmil, 3M Brand Composite Conductor Mechanical Properties, Volume 1 Tensile and Stress-Strain Tests Minnesota Mining and Manufacturing (3M) Company Purchase Order 0000227040 NEETRAC Project Number:
More informationImpact Tester. Ball Drop Easy operating falling dart instrument according ASTM D 1709 and ISO Instruments for mechanical testing.
Ball Drop Easy operating falling dart instrument according ASTM D 1709 and ISO 7765-1 This testing instrument covers the determination of the energy that causes plastic film to fail under specified conditions
More information1. Vertical reciprocating conveyor, Hydraulic straddle VRC.
PART 1: GENERAL 1.01 Section Includes: 1. Vertical reciprocating conveyor, Hydraulic straddle VRC. a. Machine, controller, platform, structural steel hoist frame. b. Wire mesh enclosure and gates. Related
More informationMECHANICAL PROPERTIES PROPLEM SHEET
MECHANICAL PROPERTIES PROPLEM SHEET 1. A tensile test uses a test specimen that has a gage length of 50 mm and an area = 200 mm 2. During the test the specimen yields under a load of 98,000 N. The corresponding
More informationLab 4: Creep, Stress-Strain Response, and Stress Relaxation of Polymer Samples in Tensile Loading
11/04/2013 1 Lab 4: Creep, Stress-Strain Response, and Stress Relaxation of Polymer Samples in Tensile Loading Diana L. Nelson (d.nelson@ufl.edu) Abstract This report presents and analyzes data collected
More informationCHARACTERIZATION OF PHYSICAL AND MECHANICAL PROPERTIES OF RIGID POLYURETHANE FOAM
CHARACTERIZATION OF PHYSICAL AND MECHANICAL PROPERTIES OF RIGID POLYURETHANE FOAM Puput Wiyono, Faimun, Priyo Suprobo and Heppy Kristijanto Department of Civil Engineering, Institut Teknologi Sepuluh Nopember,
More informationDetermination of through thickness properties for Composite thick laminate S.Vali-shariatpanahi * * Stress Engineer/Durability group leader -Airbus
Determination of through thickness properties for Composite thick laminate S.Vali-shariatpanahi * * Stress Engineer/Durability group leader -Airbus Address: Building 09J, Airbus UK,FILTON,BRISTOL BS 99
More informationLab Exercise #2: Tension Testing (Uniaxial Stress)
Lab Exercise #2: (Uniaxial Stress) Learning Outcomes: 1. Understand the basic concepts of stress and strain 2. Identify the engineering material properties 3. Connect stress and strain through Hooke s
More informationLicensed Copy: Institute Of Technology Tallaght, Institute of Technology, Sat Dec 02 09:19:48 GMT+00: , Uncontrolled Copy, (c) BSI This British
BRITISH STANDARD Rigid cellular plastics Determination of tensile properties ICS 83.100 BS ISO 1926:2005 Licensed Copy: Institute Of Technology Tallaght, Institute of Technology, Sat Dec 02 09:19:48 GMT+00:00
More informationTGL Fabrication Co.,Ltd. A growing Company with a growing reputation. Horizontal Load Testing & Inspection Services.
Horizontal Load Testing & Inspection Services. TGL Fabrications Co; Ltd Inspection Services provides comprehensive inspection of all hoisting and lifting gear onshore & offshore; the equipment is inspected
More informationMoisture Analyzers ISO 9000 CERTIFIED.
Moisture Analyzers MS-70/MX-50 MF-50/ML-50 ISO 9000 CERTIFIED http://www.aandd.jp Select the best for your applic SRA A&D's Moisture Analyzers MS-70/MX-5 MS -70/MX-5 SHS Fast and uniform heating with halogen
More informationC26800 CuZn33 Industrial Rolled
C268 Alloy Designation EN DIN CEN/TS 13388 CW56L JIS C 268 BS CZ 13 UNS Chemical Composition Weight percentage C268 Cu 66.. 68 % Zn Rest % Ni.3 % Sn.1 % Fe.5 % This alloy is in accordance with RoHS 22/96/CE
More informationEvaluation of Mechanical Properties of Hard Coatings
Evaluation of Mechanical Properties of Hard Coatings Comprehensive mechanical testing of two coated metal samples was performed on the UNMT- 1. The tests clearly distinguished brittle and ductile samples,
More informationTITAN5 UNIVERSAL STRENGTH TESTER
TITAN5 UNIVERSAL STRENGTH TESTER AT JAMES HEAL WE DON T DESIGN INSTRUMENTS, WE CREATE SOLUTIONS Setting the Standard We listen intently to textile technologists, engineers, software designers and most
More informationModel FDL 115 Safety drying chambers for limited quantities of solvent
Model FDL 115 Safety drying chambers for limited quantities of solvent The BINDER FDL 115 with silicone and dust-free inner chamber, as well as symmetric airflow dries specimens containing solvents and
More informationMechanical Properties of Materials
INTRODUCTION Mechanical Properties of Materials Many materials, when in service, are subjected to forces or loads, it is necessary to know the characteristics of the material and to design the member from
More informationISO 813 INTERNATIONAL STANDARD. Rubber, vulcanized or thermoplastic Determination of adhesion to a rigid substrate 90 peel method
INTERNATIONAL STANDARD ISO 813 Fourth edition 2010-08-01 Rubber, vulcanized or thermoplastic Determination of adhesion to a rigid substrate 90 peel method Caoutchouc vulcanisé ou thermoplastique Détermination
More informationMATERIAL SPECIFICATION FOR BEARINGS - ELASTOMERIC PLAIN AND STEEL LAMINATED
ONTARIO PROVINCIAL STANDARD SPECIFICATION METRIC OPSS.PROV 1202 NOVEMBER 2016 MATERIAL SPECIFICATION FOR BEARINGS - ELASTOMERIC PLAIN AND STEEL LAMINATED TABLE OF CONTENTS 1202.01 SCOPE 1202.02 REFERENCES
More informationCombustion Laboratory Unit C492
Combustion Laboratory Unit C492 Figure 1: C492 Unit with Optional C492A fitted Purpose built Combustion Chamber, with Instrumentation Designed for Supervised Student Operation Oil or Gas Burners Available
More informationTensile Testing. Objectives
Laboratory 3 Tensile Testing Objectives Students are required to understand the principle of a uniaxial tensile testing and gain their practices on operating the tensile testing machine to achieve the
More informationMonTech RP 3000 Rapid Plastimeter for Polymers and Natural Rubber
Plasticity 02 MonTech RP 3000 Rapid Plastimeter for Polymers and Natural Rubber The MonTech Rapid Plastimeter measures the plasticity or viscosity of polymers and unvulcanised rubbers. The test is simple,
More informationPORTABLE HARDNESS TESTING
Portable Hardness Tester IPX-300 Handheld dynamic metal hardness tester with hardness conversion and automatic position setting. Dynamic hardness testing: quick and reliable Impact device D integrated:
More informationC27000 CuZn36 Industrial Rolled
C27 Alloy Designation EN DIN CEN/TS 13388 (2.335) CW57L JIS C 27 BS CZ 18 UNS Chemical Composition Weight percentage C27 Cu 63.5.. 65.5 % Zn Rest % Ni.3 % Sn.1 % Fe.5 % This alloy is in accordance with
More informationPendulum Impact Testers
Materials Testing Systems 113 Pendulum Impact Testers A B C D E F G H I J K L M N O P Q R S T 114 Materials Testing Systems Impact Testing according to relevant international Standards In service many
More informationTABLE OF CONTENTS 1. SCOPE: REFERENCES: PARTS/PROCESS INFORMATION: EQUIPMENT SPECIFICATIONS: SPECIAL INSTRUCTIONS:...
REVISION: 1.0 REV. DATE: 2017-01-31 SHEET: 1 OF 9 TABLE OF CONTENTS 1. SCOPE:...2 2. REFERENCES:...3 3. PARTS/PROCESS INFORMATION:...3 4. EQUIPMENT SPECIFICATIONS:...4 5. SPECIAL INSTRUCTIONS:...8 6. QUOTATION:...8
More informationSTRENGTH OF MATERIALS laboratory manual
STRENGTH OF MATERIALS laboratory manual By Prof. Shaikh Ibrahim Ismail M.H. Saboo Siddik College of Engineering, MUMBAI TABLE OF CONTENT Sr. No. Title of Experiment page no. 1. Study of Universal Testing
More informationJINAN SHIJIN GROUP CO. JINAN SHIJIN GROUP CO. Ver 1.0. Headquarters: Factory Location: Regional Agent:
Ver.0 HARDNESS TESTER SERIES Headquarters: Beijing Office: Add: No.38 Shangdi West Road, Haidian District, Beijing 00085, China Tel: +86-0-6298086 Fax: +86-0-62985475 E-Mail: niyan@timegroup.com.cn Factory
More informationFood Testing Machines. Bulletin 136
Food Testing Machines Bulletin 136 F Series Machines Tinius Olsen, one of the world s leading manufacturers of materials testing machines, offers a machine specifically for analysis of food textures. The
More informationTE 65 MULTIPLEX SAND/WHEEL ABRASION TESTER
TE 65 MULTIPLEX SAND/WHEEL ABRASION TESTER Background Abrasive wear of industrial materials handling plant (e.g. transfer chutes, conveyors and hoppers) is a direct cause of repair, replacement and downtime
More informationA Fatigue Prediction Method for Spot Welded Joints
A Fatigue Prediction Method for Spot Welded Joints H. Kang 1, A.K. Khosrovaneh 2, M. Hu 1, U. De Souza 2 1 The University of Michigan-Dearborn 2 General Motors Company Table of Contents Objective Materials
More informationMetal-to-glass bonding properties of an acrylate adhesive (DELO GB368) and an ionoplast interlayer (SentryGlas) at 23, -20 and 60 C.
Metal-to-glass bonding properties of an acrylate adhesive (DELO GB368) and an ionoplast interlayer (SentryGlas) at 23, -20 and 60 C. Christian Louter Delft University of Technology, Faculty of Architecture
More informationRadiusholz Curved Cross Laminated Timber (CLT) Elements
Radiusholz Curved Cross Laminated Timber (CLT) Elements 25.06.2014 Picture reference: www.radiusholz.at G. Stecher, A. Kraler, R. Maderebner PROJECT RADIUSHOLZ Idea: Automated production of curved CLT-elements
More informationFor the National Voluntary Laboratory Accreditation Program
SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005 Instron Calibration Laboratory 825 University Avenue Norwood, MA 02062-2643 Mr. James O Donovan Phone: 781-575-5526 Fax: 781-575-5764 E-mail: james_odonovan@instron.com
More informationMorgan State University CE STRUCTURES AREA LABORATORIES
CE STRUCTURES AREA LABORATORIES The facilities in the structures area include the following: 1) 2) 3) CE Materials Laboratory (CBEIS 124), CE Structures Laboratory (CBEIS 125), and CE Structures Research
More informationAMERICAS Tel or Tel CHINA, SHENZHEN Tel
www.uic.com email: universal@uic.com AMERICAS Tel. 1-800-432-2607 or Tel. +1-607-779-7522 CHINA, SHENZHEN Tel. +86-755-2685-9108 CHINA, SHANGHAI Tel. +86-21-6495-2100 EUROPE Tel. +36-23-445-500 2010 Universal
More informationProduct Information. Stress Control Element Insulation. 3M QS 2000E 24kV I DN A
Volume: Power Utility Section: Medium-Voltage Power Cables 6/10 (12) kv up to 21/36 (42) kv Product: 3M QS 2000E Number/Issue: AABBCC46047#E/01 Date: February, 13.2007 Author: W. Röhling / R. Hornig 1.
More informationtesto 330 Flue gas analysis with increased convenience and safety
10 testo 330 Flue gas analysis with increased convenience and safety How many degrees is it really? How sure can you really be that your analyser measures exactly what it should be measuring? Our certified
More informationEvaluation of Young s modulus of thin coated layer on cold-rolled steel sheet
Evaluation of Young s modulus of thin coated layer on cold-rolled steel sheet Hideyuki Kuwahara *1, Tetsuya Yamamoto 2 and Masayoshi Akiyama 3 1 MPT, Fukakusa, Fushimi-ku, Kyoto 612-8431, Japan 2 Canon
More informationBEAMS: COMPOSITE BEAMS; STRESS CONCENTRATIONS
BEAMS: COMPOSITE BEAMS; STRESS CONCENTRATIONS Slide No. 1 Bending of In the previous discussion, we have considered only those beams that are fabricated from a single material such as steel. However, in
More informationP.V.C. INSULATED ALUMINIUM SERVICE MAIN WIRE-FINISHED PRODUCT
CEB SPECIFICATION 005-1: 2012 P.V.C. INSULATED ALUMINIUM SERVICE MAIN WIRE-FINISHED PRODUCT CEYLON ELECTRICITY BOARD SRI LANKA Telephone: +94 11 232 0953 Fax: +94 11 232 3935 CONTENTS PAGE 1. Scope 03
More informationEXPERIMENTAL STUDY ON THE EFFECT OF TENSION FOR RUBBER BEARINGS
EXPERIMENTAL STUDY ON THE EFFECT OF TENSION FOR RUBBER BEARINGS Naoyuki IWABE 1, Mineo TAKAYAMA 2, Nagahide KANI 3 And Akira WADA 4 SUMMARY This paper presents the experimental results from the tension
More informationData Sheet 110kV TD123II dry type outdoor termination
3 Data Sheet 110kV TD123II dry type outdoor termination 1. Product Description: 3M 110kV TD123II dry type outdoor termination meets requirement of test and product according to IEC60840 and GB11017.3,
More informationModel BF 720 Incubators Avantgarde.Line with forced convection
Model BF 720 Incubators Avantgarde.Line with forced convection The BINDER incubator of the BF Avantgarde.Line series with forced convection is suitable for all gentle incubation applications, particularly
More informationStandard Test Methods for Evaluating Properties of Wood-Base Fiber and Particle Panel Materials 1
Designation: D 1037 99 Standard Test Methods for Evaluating Properties of Wood-Base Fiber and Particle Panel Materials 1 This standard is issued under the fixed designation D 1037; the number immediately
More informationExperiment 4 - Testing of Materials in Tension
Experiment 4 - Testing of Materials in Tension Object: The object of this experiment is to measure the tensile properties of two polymeric materials, steel and aluminum at a constant strain rate on the
More informationKENYA STANDARD KS 574:2017. Steel fabric for reinforcement of concrete Specification
KENYA STANDARD KS 574:2017 Steel fabric for reinforcement of concrete Specification KEBS 2017 FifthEdition 2017 KS 574:2017 TECHNICAL COMMITTEE REPRESENTATION The following organizations were represented
More informationTEST REQUIREMENTS. FINAT Test Method No. 1 Peel adhesion test at 180 at a removal rate of 300 mm/min
FINAT Test Method No. 1 Peel adhesion test at 180 at a removal rate of 300 mm/min FINAT is an association of European manufacturers and processors of self-adhesive products. The FINAT Test Methods describe
More informationDigital relative humidity & temperature sensor AM2301
1. Feature & Application: *High precision *Capacitive type *Full range temperature compensated *Relative humidity and temperature measurement *Calibrated digital signal Digital relative humidity & temperature
More informationISO/TC61 ISO/TC61 1. ISO/TC TC/SC TC61 SC1 SC2 SC4 SC5 SC6 SC9 SC10 SC11 SC12 SC13
ISO/TC61 1. ISO/TC61 2. 3. 1 ISO/TC61 SC P- 32 O- 39 TC/SC TC61 SC1 SC2 SC4 SC5 SC6 SC9 SC10 SC11 SC12 SC13 2 ISO/TC61 TC/SC 2013.1.24 2013.1.24 2012/4~2013/3 SC1 7 0 1 SC2 66 17 32 SC4 27 19 8 SC5 84
More informationYIELD & TENSILE STRENGTH OF STEEL & ALUMINIUM USING MICROINDENTATION
YIELD & TENSILE STRENGTH OF STEEL & ALUMINIUM USING MICROINDENTATION Prepared by Duanjie Li, PhD & Pierre Leroux 6 Morgan, Ste156, Irvine CA 9618 P: 949.461.99 F: 949.461.93 nanovea.com Today's standard
More informationISO INTERNATIONAL STANDARD. Metallic materials Tensile testing Part 2: Method of test at elevated temperature
INTERNATIONAL STANDARD ISO 6892-2 First edition 2011-02-15 Metallic materials Tensile testing Part 2: Method of test at elevated temperature Matériaux métalliques Essai de traction Partie 2: Méthode d'essai
More informationCasting. Forming. Sheet metal processing. Powder- and Ceramics Processing. Plastics processing. Cutting. Joining.
Traditional Manufacturing Processes Casting Forming Sheet metal processing Powder- and Ceramics Processing Plastics processing Cutting Joining Surface treatment FUNDAMENTALS OF METAL FORMING Overview of
More informationSteel elevator belts. Textile elevator belts
Steel elevator belts Textile elevator belts product description ELEMET - STEEL ELEVATOR BELTS The structure of ELEMET elevator belts is a steel carcass composed by a strong warp of steel cord with suitable
More informationGRI - GM17 Standard Specification*
Geosynthetic Institute 475 Kedron Avenue Folsom, PA 19033-1208 USA TEL (610) 522-8440 FAX (610) 522-8441 GEI GRI GSI GAI GCI GII Revision 12: November 4, 2015 Revision schedule on pg. 12 GRI - GM17 Standard
More informationME -215 ENGINEERING MATERIALS AND PROCESES
ME -215 ENGINEERING MATERIALS AND PROCESES Instructor: Office: MEC325, Tel.: 973-642-7455 E-mail: samardzi@njit.edu PROPERTIES OF MATERIALS Chapter 3 Materials Properties STRUCTURE PERFORMANCE PROCESSING
More informationStandard Test Method for Tensile and Tensile Adhesion Properties of Rigid Cellular Plastics 1
Designation: D 623 03 Standard Test Method for Tensile and Tensile Adhesion Properties of Rigid Cellular Plastics This standard is issued under the fixed designation D 623; the number immediately following
More informationNEXUS 3200 Series Brinell hardness testers
NEXUS 3200 SERIES NEXUS 3200 Series Brinell hardness testers 6.5, Full color industrial LCD touch screen for easy tester operation, can also be operated by wireless mouse and keyboard. High performance
More informationPART MATERIAL REMARK Metal Case with Pig-tail. Brass (Metal Case) Copper (Pig-tail) Star Contact Copper Silver Plated
1. SCOPE This specification defines the technical requirements of TZ-D series thermal-link with PROFFUSE brand that are produced according to IEC 60691, UL 60691,GB 9816. 2. APPLICABLE STANDARDS IEC 60691,
More informationWLC60 Heavy Duty LED Light
Datasheet Banner's WLC60 Heavy Duty Lights are engineered to withstand harsh environments, making it the first choice for a machine lighting solution. A conservative mechanical design protects against
More informationComparison of Energy Absorption Characteristics of Thermoplastic Composites, Steel and Aluminum in High-Speed Crush Testing of U-Beams
Comparison of Energy Absorption Characteristics of Thermoplastic Composites, Steel and Aluminum in High-Speed Crush Testing of U-Beams CELANESE ENGINEERED MATERIALS Michael Ruby October, 2013 1 Overview
More informationC51100 CuSn4 Industrial Rolled
Alloy Designation Bronze Rolled Products EN DIN CEN/TS 13388 CW45K JIS C 5111 BS PB 11 UNS Chemical Composition Weight percentage Cu C511 Rest Sn 3.5 4.5 % P.3.35 % This alloy is in accordance with RoHS
More informationComplex physical properties
Complex physical properties Complex (less well-defined) physical properties are: stiffness box compression strength tearing resistance impact or burst strength delamination or interlaminar strength surface
More informationInnovative Solutions for
Supporting The Needs Of- ISO9000 QS9000 Six Sigma Innovative for Quality Control Measurement Flaw Detection Data Reporting Manufacturing Turnkey Systems Process Control Gauges & Fixtures Engineering Product
More informationSHEAR BEHAVIOR OF RC BEAMS USING U-SHAPED UFC PERMANENT FORMWORK WITH SHEAR KEYS OR BOLTS
- Technical Paper - SHEAR BEHAVIOR OF BEAMS USING U-SHAPED PERMANENT FORMWORK WITH SHEAR KEYS OR BOLTS Puvanai WIROJJANAPIROM *1, Koji MATSUMOTO *2, Katsuya KONO *3 and Junichiro NIWA *4 ABSTRACT Shear
More informationAP5K-C Precision AC Double-Pulse Spot Welding Machine User s Manual Shenzhen Will-Best Electronics Co., Ltd
AP5K-C Precision AC Double-Pulse Spot Welding Machine User s Manual Shenzhen Will-Best Electronics Co., Ltd 1 Content 1. Introduction...3 1.1 Functions...3 1.2 Units of AP5K-C...4 2. The Initial Installation
More information3M Electrically Conductive Adhesive Transfer Tape 9707
Technical Data May 2014 3M Electrically Conductive Adhesive Transfer Tape 9707 Product Description 3M Electrically Conductive Adhesive Transfer Tape (ECATT) 9707 is a pressure sensitive adhesive (PSA)
More informationTECHNICAL SPECIFICATIONS FOR 40 TON CAPACITY 7.5 x 3/9 x 3 M ELECTRONIC PITLESS PORTABLE WEIGHBRIDGE.
TECHNICAL SPECIFICATIONS FOR 40 TON CAPACITY 7.5 x 3/9 x 3 M ELECTRONIC PITLESS PORTABLE WEIGHBRIDGE. SR. NO. ITEM OUR STANDARD SUPPLY PURCHASER'S REMARKS 1 LOAD-CELLS 'DOUBLE ENDED SHEARBEAM' or COMPRESSION
More informationEffect of Processing Parameters on Polypropylene Film Properties
Vol.2, Issue.5, Sep.-Oct. 2012 pp-3056-3060 ISSN: 2249-6645 Effect of Processing Parameters on Polypropylene Film Properties Ikilem Gocek 1, Sabit Adanur 2 1 (Department of Textile Engineering, Istanbul
More informationStress Relaxation and Creep System for testing of stress relaxation and creep
Stress Relaxation and Creep System for testing of stress relaxation and creep We have designed special versions of cell ageing ovens for use in relaxation testing. Reduced height ovens designed specifically
More informationCustom-Designed Clamps. Machined Versions. Online Configurator for Custom-Designed Clamps A56.
Custom-Designed Clamps Machined Versions Custom-designed clamping systems for pipes, tubes, hoses, cables and other components according to customer`s specifications or based on developments, made of thermoplastics,
More informationPUNCH FORCE BEHAVIOR DURING MICRO V-BENDING PROCESS OF THE COPPER FOIL
International Journal of Technology (017) 7: 1314-130 ISSN 086-9614 IJTech 017 PUNCH FORCE BEHAVIOR DURING MICRO V-BENDING PROCESS OF THE COPPER FOIL Gandjar Kiswanto 1*, Aida Mahmudah 1,, Dedi Priadi
More informationTRIAC ST TRIAC AT ELECTRON ST HOT JET S General accessories
56 Civil Engineering / Tunneling / Landfills Product overview wedge welder Product overview extrusion welder ASTRO / ASTRO USB COMET / COMET USB TWINNY T / TWINNY T USB / TWINNY S TRIAC DRIVE AT EXAMO
More informationVickers Hardness Tester (Automatic Turret)
Vickers Hardness Tester (Automatic Turret) Micro-Vickers Hardness Tester (Automatic Turret) Micro-Vickers Hardness Tester (Automatic Turret) Vickers Hardness Tester (Automatic Turret) DIGITAL VHT-A9010ED
More information產品承認書 總公司 : 亞洲電材股份有限公司 ////APLUS 昆山雅森電子材料科技有限公司 客戶 SELLER CO.CHOP&AUTHORIZED CUSTOMER: 品名 AHICX015/020/025/125X1MMN DESCRIPTION: 日期 DATE:
總公司 : 亞洲電材股份有限公司 Headquarter: Asia Electronic Materials Co., Ltd. ////APLUS 昆山雅森電子材料科技有限公司 China plant: Kunshan Aplus Tec. Corporation 產品承認書 FOR APPROVAL 客戶 SELLER CO.CHOP&AUTHORZED CUSTOMER: 品名 AHCX015/020/025/125X1MMN
More informationCombined Hardness Tester NOVOTEST T-UD3 NEW
Combined Hardness Tester NOVOTEST T-UD3 NEW Unique, multi-functional, convenient, and reliable tester at affordable price! 88 combinations of materials and hardness scales and calibrations Integrated camera
More informationexpert 2600 Series Universal Testing Systems
expert 600 Series Universal Testg Systems System Brochure expert 600 Series Universal Testg Systems ADMET s most versatile Universal Testg Systems coverg the widest range of applications and load capacities
More information2. TEST METHOD FOR OVERLAP SPLICE STRENGTH OF CONTINUOUS FIBER SHEETS (JSCE-E )
2. TEST METHOD FOR OVERLAP SPLICE STRENGTH OF CONTINUOUS FIBER SHEETS (JSCE-E 542-2000) 1. Scope This specification describes the test method for the overlap splice strength of continuous fiber sheets
More informationCombined Hardness Tester NOVOTEST T-UD2
Combined Hardness Tester NOVOTEST T-UD2... High-precision, easy in operation and reliable with the most affordable price in the world among the analogues! Two probes: UCI and Leeb Any restrictions for
More informationQuality Control Procedures.
Page 1 of 8 Quality Control Procedures. Furrytails prides itself on its factory having one of the strictest quality control procedures within the Soft Toy Industry. These procedures include Safety Testing,
More information