Table of Contents. Preface and Committees

Transcription

1 Table of Contents Preface and Committees Session 1: Advanced Materials and Computer Science Improved Learning Algorithm Based on Semi-Supervised Support Vector G.X. Peng and B. Li 1 Computer Simulation Model for Spherical Particle Filled Composite Materials Z. Chen, Z.X. Huang, M. Zhang, M.X. Shi, Y. Qin and Q.L. Mei 7 Modeling of Stochastic Von Neumann Model of Mobile Service F.Q. Xu and L. Jiang 11 Remote Sensing Image Segmentation Based on Region-Split and Graph Cut H. Jiang and J. Wen 15 Study on Data Mining System Multi-Task Scheduling Method Based on Precedence Constraints X.D. Song, E.Z. Hou, F. Zhang and L.Y. Shi 19 Continuous Casting Mold Four-Link Vibration Mechanism Dynamic Simulation X.B. Liu and Y.X. Li 24 Parametric Simulation on Torque-Angle Characteristic of Rotary Electromagnet with Low Inertia B. Meng, J. Ruan and S. Li 29 Effect of Priming Techniques on Seed Germination Characteristics of C. Maxima Duch Y.D. Sun, X.Z. Li, H.L. Yang and L. Sun 36 Missile-Target Information Acquisition of PRS in Confrontation Environment C.N. Zhao, Y. Zhao, Y.S. Li, L.M. Luo and Y. Liu 40 α-cost Minimization Model of Grain Supply Chain S.B. Ding 50 Framework for Building Web Sites with Microsoft s.net Technology Y.E. Wang, Y. Chen and X. Xing 54 Design and Implementation of the RF Front-End All-Digital Phase-Locked Loop in the UHF RFID Reader Y.L. Wang, G.T. Wang and W.J. Liu 63 A Novel Approach for Automatic Tongue Deviation Analysis with Auto-Correction M.F. Zhu, J.Q. Du, K. Zhang and C.H. Ding 69 Computer Network Security Several Strategies K. Zhang, H.F. Wang, J.F. Zhu and Z. Li 75 The Status and Development Trends of Virtual Private Network Technology K. Zhang, H.F. Wang, Y.C. Ma and Z. Li 79 Chaotic Control in a Fractional-Order Modified Van Der Pol Oscillator X. Gao 83 A Hybrid EMD-Based Time-Frequency Analysis Strategy L. Qian, G.P. Xu and N. Yang 89 A Method of Self-Adaptive Controlling Temperature Fluctuation of Display Cabinet in Dynamic Ice-Storage System W.H. Guan, L.F. Li and Y.M. Lin 96 Optimal Design of Safety Valve Spring J.H. Zou and J.G. Nie 102 Controlling the Fractional-Order Chaotic System Based on Inverse Optimal Control Approach X. Gao 108 A Novel Series Inflation Prediction Model Based on the Grey Fuzzy Theory Y.Q. Zhang 114 Research on Improving LFMCW Radar Level Measurement Accuracy X.M. Yu and X.K. Yu 119

2 The Research on Anticorrosion and Abrasion Behavior in Corrosive Medium of Micro-Arc Oxidation Film on Magnesium Alloy B.Y. Lou, Y.X. Tang and X. Li 123 The Application of Job Bidding Mechanism in Electrical Enterprises J.N. Zhao and J. Xu 127 Lightweight Design of Shipbuilding Gantry Crane Structure Based on FEA M.L. Yang, G.N. Xu and Z.Y. Chang 131 Prediction of Resin Thermal Behavior during Curing Process Based on Kamal-Ryan Model W.X. Tang, J. Zhang and B. Ma 137 Towards Subjective Consistency: An Effective Objective Quality Assessment Algorithm for Binary Image C.E. Zhang, F.C. Guo and K. Xiong 143 Improved Model for Strategic-Loading-Station Location Problem under Incomplete Information Q.L. Ren, M.M. Li, Q. Li, J.S. Chen and B. Li 151 Study of Adsorbent Derived from Sewage Sludge Incineration Residue for the Removal of Ni 2+ in Wastewater J.Y. Liu, X.N. Ning and Z.Y. Yang 158 Tooth Profile Synthesis and Strength Computation of Swing Movable Teeth Drives S.M. Liang, B. Fu, D.M. Wang, G.F. Yin and B. Huang 162 A Dual Description Logic for the Relations in Databases F.Z. Li 168 The Characteristic and Mechanism of Lead Pollution in Soil Profiles from a Sulphuric Acid Slag Pile Sit in Guangdong,China J.Y. Liu and X.A. Ning 172 The Range Distribution of Er Ions Implanted in Silicon Crystal X.F. Qin, Y. Liang and F.X. Wang 178 Route Choice Options Based on Lattice Alliance Certification in Wireless Networks Q.Y. Zhang, W.T. Jiang and G.B. Bao 183 A Method of Tools AE Signal Feature Extraction Based on Wavelet Packet Analysis L.S. Guo, N.Q. Dong, W. Tian, F.Z. Zhang and C.X. Li 189 Application of Nanometer Metal Oxides in Infrared Ray Shielding Transparent Thin Film A.H. Guo, X.J. Tang and S.J. Zhang 195 The Change of Tangshan Nanhu Wetland Landscape and Ecological Quality Assessment A.H. Guo, C.J. Wang and S.J. Zhang 200 Multi-Objective Optimal Approach Based on Kriging Model in a Deep Drawing Process Y.M. Xie 205 Relationship between Metabolic Syndrome and its Diagnosis and Treatment of Hypertension Strategy X.S. Pan, Z.H. Huang and J.S. Lan 211 The Effect of a Temporary Bottleneck in Two-Lane of a Road on Traffic Flow Based on the Kerner-Klenov-Wolf Model H.J. Liang, H.Y. Yang, C. Xiao, P. Sheng and J.W. Zhang 215 Research and Development on Secure System of EPC Internet of Things Based on RFID and WSN X. Xie, Y. Wu and H.L. Chen 220 The Study on Electrocatalysis Properties of Pt / Co Coated Graphite Electrode B.Y. Lou, P.H. Li and X. Li 224 Calculation and Spatial Distributing Simulation of Turbulence s Kinetic Energy Entropy in Strengthen Grinding Z.W. Liang, X.C. Liu, J.H. Tao and C. Wang 228 Quantitative Evaluation of IC Micro-Topography s Influence on Image Characteristics Z.W. Liang, C.L. Zhang, S.K. You and A.S. Li 234 An Improved CAVLC Entropy Encoder of H.264/AVC and FPGA Implementation H. Guo and Y.Q. Fu 241 Motive Simulation on the Grinding Head of Ceramic Polisher Based on Matlab W.W. Hu, J.H. Fen and Z.M. Dai 247

3 b Advanced Materials and Computer Science Multi-Step Forward Finite Element Method for the Numerical Simulation of Sheet Metal Forming J.J. Wu, W. Liu and Y.J. Zhao 251 Numerical Simulation of Semi-Solid Die Casting Process of Magnesium Alloy Y.P. Hu and Y. Hu 255 Research on Seat Design of Railway Passenger Car B.C. Zhang, W.M. Guo and Y.Q. Wang 260 The Development of Online Examination System Based on B/S Structure J.P. Yu and P. Chen 265 Consider the Option Value Model on the Optimal Investment of the Recycle Economy Projects H. Wang and L.L. Chen 271 Research of IRFPA Non-uniformity Real-Time Correction Based on SOPC B. Li, Z.Y. Yang and B. Ma 277 Design on ZigBee Wireless Sensor Network Node H.B. Deng and L. Zhang 283 Investigation on Plastic Forming of Foam Aluminum Material H.B. Chen, Z.Z. Sun, W.F. He and R.Y. Li 287 Capacity Management System of High Speed Railway in China D.W. Li, B.M. Han and X.J. Li 292 Research on Random Walk Rough Matching Algorithm of Attribute Sub-Graph C.Y. Zhang, J.F. Guo and X. Chen 297 Analysis and Simulation of the Influence of Viscous Damping Coefficient on the Rigid Body Contact Force H. Li, W.X. Tang and Z.H. Hu 303 Influence Analysis of CCD Miss-Distance and Corresponding Research of τ Compensatory Technology Based on Finite Memory H.B. Huang, W.H. Wang and T. Zuo 309 Optimal Investment Decision of the Recycle Economic Projects Based on Game Options H. Wang and L.L. Chen 315 Preparation and Properties Study of Porous Carbon Template Based on SLA J. Jin, H. Li and S.H. Wang 320 Numerical Simulation and Analysis for Surface Defect Prediction in the Hot Bar Rolling Process J. Jin and G. Huang 325 The Research of Mobile-Commerce based on Web Services O.Y. Quan 330 Zinc Chloride Content Analysis Methods and Special Reagent in Acidic Galvanized Solution H. Wang 335 A Control Method Study for a Class of Networked Control Systems Based on Wireless Sensor Networks J. Zhang, Y.M. Bo and C.B. Ye 339 Study on the Luminescence and Reflection Spectra of Al 2 O 3 Doped Er 2 O 3 Films on Si Substrates Y.Y. Zhu, Z.B. Fang, Y. Zhao, H.Y. Li, J. Chen and H.J. Cao 345 Combining Speech Enhancement and Cepstral Mean Normalization for LPC Cepstral Coefficients J. Yang 349 An Analysis on the Scale Economies and Scope Economies after the Reorganization of China Unicom J.N. Zhao and X.Q. Zhang 355 Design of Insulation Resistance Test for Cables in Intelligent Munition Z.W. Zhang, L. Chen and B.F. Ren 361 Virtual Dynamics Simulation on Railway Wheel-Track Contact Force Spectra Z.Z. Wen and Y.X. Zhao 365 Study on Machine Vision Orientation of Incremental Sheet Forming Process F. Han, Z.Q. Ma, J.H. Mo and M. Hu 371

4 Key Engineering Materials Vols c Oxidation Analysis of 304 Austenitic Stainless Steel Sheet after Intermediate Annealing F. Han, G.Y. Lin, Z.L. Wang and D.S. Peng 376 Environmental Input and Output Analysis on the Solar PV Industry Chain of China J.N. Zhao and X.N. Li 381 Research on Stratified Re-Sampling Particle Filter Target Tracking Algorithm Based on Multiple Clues J. Cao and Q.H. Zeng 386 One Intelligent Video Surveillance System Based on DM642 Z.W. Tang and X.X. Wu 392 The Synthesis and Feature of the Hydrogel Sensitive to PH/Electronic Field X.F. Zhu, W. Zhou, H.X. Zhang and Y.J. Nie 398 Research and Design of WAP-Based Mobile E-Commerce System H.Y. Xu 403 Martensitic Transformation Behavior of Ni Mn Fe 7 Ga 25 Ferromagnetic Shape Memory Thin Film H.B. Wang, H. Xiong, L. Ma and W. Cai 408 A Novel Adaptive Routing Algorithm for Network-On-Chip J. Jia, D. Zhou and J.X. Zhang 413 Geometric Figure Recognition by Using Multiple Algorithms Combination J.W. Xu, S.H. Park and X.Y. Fei 417 Numerical Simulation of Flow around Cylinder Using the Lattice Boltzmann Method Based on Guo Boundary Condition H. Li, Y.H. Liu, Y.Z. Wang and J.M. Ma 422 Development of an On-Line Thermocouple Auto-Calibration System for Ceramic Kilns S.L. Yang, J.T. He, C.X. Sheng, Y. Zhang, C.W. Qin and S.B. Chen 428 Application of Numerical Simulation on Cast-Iron Pneumatic Hammer Housing G.F. Mi, L.L. Chen, B.Z. Liu and H.Y. Wang 432 Reliability Analysis of Automotive Rear-Axle Bumper by Using Adaptive Neural-Fuzzy Inference System J.W. Xu, S.H. Park and X.Y. Fei 436 Video Image Segmentation Using Gaussian Mixture Models Based on the Differential Evolution-Based Parameter Estimation Z.G. Zeng, L.X. Ding, S.Q. Yi, S.Y. Zeng and Z.H. Qiu 442 Influence of Ar+ Energy of Bombardment Cu Target and Low Energy Assisted Bombardment on Cu-W Thin Film Structure by Ion Beam Sputtering Y.P. Ai, Y.Y. Zeng, L.J. Liu, X.M. Huang and T.P. Zhou 448 A Fine-Grained Embedded-Software-Network Detection Method F.G. Liu, N. He, S.W. Li and F. Liu 454 Identification of Chinese Unknown Word Based on Finite Multi-List Method B. Sun, S.H. Huang and X.H. Liu 460 Evaluation Indicator Architecture Development for Industrial Automation Systems Using ISO15704 Annex B: GERAM J. Li, Q. Li and J. Zhou 466 A Material Removal Modeling of Chemical Mechanical Polishing Based on Micro-Contact Mechanism S.W. Du, Y.T. Li, J.J. Song and H.P. Qi 472 A Research of Principle and Application of Communication Interface between MBMS and DBMS in DDS Q.W. Ye, G.X. Song, Y.H. Feng and Q.Y. Nie 478 Comprehensive Evaluation Model of Grey Fuzzy on Oilfield Development Program J. Hu, Z.B. Liu and K.Q. Zou 484 Research on Holonic Control Structure and System Layout for Re-Configurable Manufacturing System (RCMS) X.Q. Wen, X.J. Ding, Z.M. Zhao and Z.Y. Xie 490 Research of the Parameter for the Piston s Configuration in the Tile Press s Moving Beam W.W. Hu, B.Q. Zhang and J.H. Fen 498 The Exploration on Principal Vibration Mode of the Multi-Freedom System J. Liu 503

5 d Advanced Materials and Computer Science Diffusion Bonding of ZrO 2 Ceramic and Cu-Pb Alloys H.H. Pan, D.X. Zhang, I. Itoh and S. Kawasaki 507 Plum Tree Visualization Based on SpeedTree Z.Y. Bai and X.Y. Huang 511 Adaptive WSN MAC Protocol Based on Mixing Broadcast X. Chen 517 A Kind of Security Certification Schema of Hierarchical Distributed Sensor Network Based on Certificate Reconstruction H.F. Chang 522 A Kind of Network Security Evaluation Method Based on Local Variable Weight Y.J. Wang and H.Y. Lin 527 A Hybrid Context Model for Pervasive Healthcare System S.M. Ma, R.C. Wang and N. Ye 531 Research on Some Novel Functional Azobenzene Derivatives with Alkyl Chains and Different Substituted Groups T.F. Jiao, X.H. Li, J.X. Zhou, Y.Y. Xing and J. Ren 537 Spectral and Thermal Investigation of Novel Glycine-Based Schiff Base Derivative and its Metal Complexes T.F. Jiao, J. Zhou, J.X. Zhou, Y.Y. Xing and X.H. Li 543 Effect of Fiber Volume Fraction on High Temperature Creep of Al 2 O 3 -SiO 2 (sf)/az91d Composite J. Tian 548 Analysis of the Acoustic Performance of Automotive Exhaust Muffler and Optimization of its Structure M.Y. Zhu and Q. Liu 553 The Mean Projected Range and Range Straggling of Nd Ions Implanted in Silicon Carbide X.F. Qin, S. Li, F.X. Wang and Y. Liang 565 Study on the Software Defects Using Positive and Negative Association Rules Based on Multiple Minimum Supports Y.G. Shen and J. Shen 570 A New Clustering Algorithm Partition K-Means M. Chen, C.J. Yin and Y.P. Xi 577 Effect of Pressurizing Process on Molten Aluminum Alloy and Furnace Chamber Temperature of Vacuum Counter- Pressure Casting Q.S. Yan, H. Yu, C.C. Cai, B.W. Xiong and G. Lu 581 Fractal Artistic Algorithm Structure and Image Production A.L. Duan and Q.B. Duan 586 Adaptive Searching and Kalman Filter Vision Compensation during Mobile Robot Docking Operation B.R. Wang, Y. Xu, Y.L. Jin and M. Cheng 592 Image Encryption Scheme Based on Dual Hyper-Chaotic Recurrent Neural Networks E.Z. Dong, Y. Du, C.C. Li and Z.P. Chen 599 Ploidy Determination of Parthenogenetic Artemia by Flow Cytometry S.F. Wang and Y. Wang 605 Fatigue Damage Accumulation Model and Fatigue Life Predication of Composite Laminate T300/ Epoxy-Resin L. Wang, T.Z. Sui and W.Q. Lin 609 Design and Implementation of a Manufacturing Business Collaboration Platform Based ESB Technology X. Sui, Y.L. Zhu, L. Nan and J.W. Wu 615 New Feature Subset Selection Algorithm Using Class Association Rules Mining S.J. Zhang and Q. Zhou 622 Optimal Power Control of Smart Grid Based on Neural Network Optimization L.Y. Zhang and S.H. Quan 626 Machinability of ZTC4 Titanium Alloy Analysis Using Finite Element Simulation and Milling Experiment C.Y. Liu, Z.A. Tang, S. Yang, W.W. Liu and Y.D. Lu 633 Bearing Fault Detection Based on Order Tracking and Complex Morlet Wavelet Transform H. Li 639

6 Key Engineering Materials Vols e The Covered Operation of Absolutely Grey Number and Grey Power Function Q.X. Li and J.M. Yang 645 The Method to Construct Elementary Dependent Function on Single Interval Q.X. Li and X.S. Li 651 Dynamic-Pseudo-Random Test Sequence Generation Technique with Low Power Consumption S.J. Zheng, J.J. Liu and T.J. Li 655 A Standing Wave Ultrasonic Motor Using Longitudinal Vibration Transducers J.K. Liu, T. Xie, W.S. Chen and C.H. Jia 661 Forefoot Plantar Pressure Distribution Character during Inversion Position X.X. Su, Y.D. Gu, G.Q. Ruan and X.J. Ren 666 Multi- Universal Coupling Phase Modeling and Optimization Base on Floor Vibration Control H.S. Song, W.K. Shi, Y. Long, F.X. Guo and D.G. Fang 669 Investigation on Technology of Automobile Vibration and Noise Reduction Based on Body- In-White Structure Q.S. Hu, F. Ni, S.G. Zuo, J.P. Lin, D.G. Fang and F.X. Guo 676 Application of Neural Network in Urban Land Use Suitability Evaluation X.R. Zhang and G. Chen 681 Investigation on the Sedimentation Behavior of the α-al 2 O 3 Aqueous Suspension by the Combination of Two Dispersants F.Z. Li, Y.Q. Han and B. Guo 687 A Software Integration Testing Architecture Based on Contract S.P. Yu and W.W. Mao 693 Influence of Material Properties on Air Bending Based on RBF Y. Gao, Y.Z. Liu, L.F. Fan and Q. Li 699 New Dynamic Jiles-Atherton Hysteresis Model for Giant Magnetostrictive Material X.X. Li and W. Zhou 704 Context Perception Mechanism in Virtual Assembly Environment M.Y. Lv, W.J. Hou and Y. Jin 709 The Condition Monitoring of Large Slewing Bearing Based on Oil Analysis Method X.Q. Bai, H.L. Xiao and L. Zhang 716 Theoretical Investigation of the Adsorption of Nh 3 on B-Doped Graphene D.M. Bi, L. Qiao, X.Y. Hu and W. Zhi 720 The Application of the Projection Pursuit Model of the Particle Swarm Algorithm on the Investment Decision L. Deng and F.Q. Luo 725 A Hybrid Model of Cross-Domain Authentication for Password Synchronization Q.Y. Zhang, Z.P. Cai, Z.T. Yuan and F.M. Miao 729 Low-Cost Condition Monitoring System of Rotating Machinery Based on LabVIEW Y.J. Fan, Y. Guo and C.H. Wu 735 Stability Bearing Capacity Analysis for High-Strength Angle Steel Members with an Eccentric Load at One End X.L. Cao and J.P. Hao 739 Research on CO 2 EOR Mechanism and Application in Shengli Oilfield G.Z. Lv, J. Zhang, F. Wang, G.H. Yan and X.J. Zhang 744 Rolling Bearing Finite Element Contact Analysis and Lectotype Design for Lunar Rover Wheel-Legged Mechanism Y.M. Wang, T.H. Fan and X.L. Yu 748 Image Reconstruction Algorithm for Ultrasound Tomography Based on Transmission Mode Y.Q. Li and S. Liu 754 The Research of Key Frame Extraction Technique Based on Video Content W. Zhe 760 Scheduling Platform of Semiconductor Assembly and Test Producing Line L. Wang, J.M. Li and J. Yao 764 Research on Multi-Threshold Color Image Segmentation Based on Rough Set G.Q. Zhang and Z.M. Li 771

7 f Advanced Materials and Computer Science Travel Time Prediction of Multi-Source Historical Data Fusion W.T. Liu, Z.J. Wang and Q. Yan 777 Research on the Location and Segmentation Technologies in Palmprint Identification S. Xu, J.D. Suo and J.Y. Zhao 782 Removal of Oil from Steel Wastewater by Adsorption onto Organic Modified Sepiolite F.W. Li, J. Yang, S.J. Ma, N.F. Wu, M.L. Fu, H.W. Jia and Q. Wu 786 Preparation of the EG/TiO 2 Composites in the Method of Impregnation L.Q. Wang, X.N. Yang, X.L. Zhao, R.J. Zhang and Y.L. Yang 792 Stress Distribution Model between Lunar Rover Wheel-Leg Foot and Lunar Soil Y.M. Wang, T.H. Fan and X.L. Yu 797 Mechanism Design and Dynamic Analysis of Hybrid Cam-Linkage Mechanical Press Z.H. Ge, W.J. Ma, K.K. Zhang and W. Huang 803 Session 2: Material Science and Mechatronics FEA of Stress behavior in the Single-Lap Adhesive Joint X.C. He 807 Study of Wake Characteristics of a Horizontal-Axis Wind Turbine within Two-Phase Flow P. He, N.C. Chen and D.M. Hu 811 Reliability and Maintainability Model of Support Object System for Equipment Combat Unit L. Chen, Z.P. Shu, H.J. Feng and Y. Li 816 Rule Anomalies Detection in Firewalls X.J. Liao, Y. Wang and H. Lu 822 A Small World Routing Protocol in Wireless Sensor Networks W.J. Xu, L.J. Sun, J. Guo and R.C. Wang 828 A New Method for Parameters Extraction of Extruded Surface L.H. Yan and Z.M. Huangfu 834 Configuration Design and Kinematic Analysis on Some New 2R1T 3-DOF Parallel Robots D.C. Zhu, F. Xiao, L. Wang and Q.H. Gu 840 An Algorithm of Leaf Image Segmentation Based on Color Features J.Y. Bai and H.E. Ren 846 Errors Analysis and Calibration on Measuring Mechanical Arm for EVA Spacesuit Ergonomics Research J. Wen, L. Zhou, C. Zhang and T.F. Liang 852 On-Line Defect Detecting Method Based on Kernel Method K.J. Xu, B. Chen and L. Zeng 858 Research on Key Technologies of College Computer Room Billing Management System K. Zhang 864 Study on Traffic Overload Management for ICIE S. Lu 870 A Disquisition on Traffic Noise Pollution and its Effective Control as Countermeasures R.Q. Sui 874 Experimental Investigation on Transient Process of a New-Type Heat-Pipe Heat-Sink X.L. Xie 880 Suppression of the Conducted Interference of Switching Power Supply H. He, S. Bao, H. Li, D.J. Zhang and M.F. Hou 883 Study of TD-LTE Base Station Co-Existence with TD-SCDMA Base Station H. He, H. Dong, T. Yang, L. He and C.C. Wu 888 Research on the Asphaltene Structure and Thermal Analysis in Catalytic Aquathermolysis of Heavy Oil F.J. Zhao, Y.J. Liu, Y. Wu, Y. Si, B. Zhang and H.R. Wu 893 A Kind of ONS Parse Method Based on Address Aggregation in Internet of Things Y.E. Liang and X. Fu 898 A Kind of TD-SCDMA Download System Based on Cloud Computing X. Chen and Y. Zhang 903

8 Key Engineering Materials Vols g Surface Matching Technique in Hexahedral Element Mesh Generation with Inside-Out Grid-Based Method L. Sun and G.Q. Zhao 908 Study on Thermal Boundary Condition of Manufacture Process for Composite Pressure Vessel L. Ma, L.J. He and H.B. Wang 915 The Wireless System of Data-Acquisition of Temperature Based on Radio Frequency K. Mo, Q.L. Sun, H. He, D.J. Zhang and M.F. Hou 919 An FPT Algorithm for the Correlation Clustering Problem X. Xin 924 Image Segmentation Method Based on Fisher Criterion and Genetic Algorithm X.X. Fu, Z.J. Chen and Y.F. Zhao 928 Studying the Rock Seepage Parameters Identification Method Based on Finite Element Method and Difference Evolution Arithmetic Z.P. Song, A. Jiang and J. Zhang 933 Using Data Warehouse to Discover the Relation between TW-DRG and Pharmacology C.S. Chen, G.Y. Chen, J.W. Hong, J.R. Jhang, J.Y. Liou and S.Z. Wu 938 Computer Simulation of Vesicle Fusion S.G. Wu and H.X. Guo 943 Energy Analysis of Vesicle Fusion by Dissipative Particle Dynamics Simulation S.G. Wu and H.X. Guo 949 Reconstruction and Mesh Simplification of Tooth Model L.M. Zhou, S.Y. Zheng, Y. Zhou and Q. Li 955 Collision-Free Tool Path Generation for Five-Axis High Speed Machining L.Q. Zhang and M. Yue 961 Prediction Model of Non-Iterative Least Squares Support Vector Machines Based on Quadratic Renyi-Entropy G.H. Zhao 967 Friction and Wear Behavior of Structural Ceramics Sliding against Bearing Steel under Vacuum Condition Y.X. Tong, L.Q. Wang, L. Gu and B. Peng 973 Evolution of Effective Short Fatigue Cracks Density of LZ50 Axle Steel B. Yang and Y.X. Zhao 979 Multimedia Teaching Problems and Countermeasures Research on PE Major in Chinese Colleges M.L. Li, W.P. Ma, Y.X. Li and Z.L. Tan 985 The New Design of Children Safety Device in the Car L. Shen and X.H. Jiang 989 Investigation on the Effects of Sheet Thickness and Deformation Temperature on the Forming Limits of Boron Steel 22MnB5 J.Y. Li, J.Y. Min, K.Y. Qin, J.P. Lin, F.Q. Liu and L.C. Liu 993 Effect of Different S/In Ratio on Properties of In 2 S 3 Films Prepared by Ultrasonic Spray Pyrolysis Method X. Zhang, H. Wang, J.W. Xu, L. Yang and M.F. Ren 998 Knowledge Transfer Research in Virtual Contexts B. Wu, J. Ge and W.X. Xu 1002 Social Network Analysis in Knowledge Management Research B. Wu, J. Ge and W.X. Xu 1007 Gear Fault Diagnosis Based on Second Order Cyclostationary Analysis H. Li 1012 Analysis of Smart Antenna Interference Suppression Base on LMS Improved Algorithm H. He, C.C. Wu, T. Yang, L. He and D. Li 1019 Heat Buffering Property of Phase Change Materials in Textiles Y.C. Sun and Z.H. Cheng 1024 A Nano-Structure Memristor and Key Manufacture Technologies X.H. Bai and D.Z. Wen 1029

9 h Advanced Materials and Computer Science Study on the Application of Weak Signal Recovery System Based on the Stochastic Resonance H. Deng and Z. Li 1033 An Object-Oriented Shadow Detection Approach of Remote Sensing Image X.L. Shen, Z.F. Shao, H. Luo and W. Cheng 1038 Preparation and Electromagnetic Property of Hexagonal W-Type Ferrite Obtained by the Sol-Gel Method X. Zheng, Z. Xi and Z.L. Jun 1044 Performance of the Piecewise Rate Modulation Strategy to Convey Mandarin Tonal Information for Cochlear Implant Using Neural Network Simulation T. Guan, Q. Gong and T. Zhou 1049 Isolation and Screening of Endophytic Antagonistic Bacteria to Camellia Soft Rot Disease and 16s rdna Sequence Analysis G.Y. Zhou, X.J. Li and T.T. Bu 1053 Advanced Processing of Biologically-Treated Leachate by PAC H.Y. Zhang, D.H. Chen, Y. Zheng and J.Y. Qi 1057 Three Dimension Automobile Customization System Based on EON Studio and Network C.X. Xu, D.C. Sun, D.J. Feng, L. Wen and T.T. Song 1063 A Novel Structure Design of 4-DOF Spatial Compliant Parallel Manipulator D.C. Zhu, Q.H. Gu, L. Wang and F. Xiao 1069 Comparison of Digestion Methods for Analysis of Heavy Metals in MSWI Bottom Ash H.Y. Zhang, Y. Zheng, H.T. Hu and J.Y. Qi 1075 Research and Implementation of Mixed Access Control Model L.J. Huang, C.Y. Zhou, Y.W. Wei and L.P. Dai 1081 Characterization of Heavy Metals in Municipal Solid Waste Incineration (MSWI) Slag H.Y. Zhang, Y. Zheng, H.T. Hu and J.Y. Qi 1087 Circuit Design Based on Particle Swarm Optimization Algorithms X.S. Yan, Q.H. Wu, C.Y. Hu and Q.Z. Liang 1093 Use of Municipal Solid Waste Incineration Bottom Ash in Adsorption of Heavy Metals H.Y. Zhang, Y. Zheng, H.T. Hu and J.Y. Qi 1099 Application of Wavelet Packet Energy Spectrum in Coal-Rock Interface Recognition B.P. Wang, Z.C. Wang and Y.X. Li 1103 Simulation Study on Attrition to Centrifugal Sewerage Pump J.H. Liu and M.Y. Zhu 1107 Application in Die Forging Simulation Coupling Finite Element and Element-Free Galerkin Method D. Li, W.Q. Kang and P.W. Guo 1111 The Application in Grain Monitoring Based on Particle Swarm-Fuzzy Neural Network Algorithm Z. Tong, W. Jing, Y. Ming and J.J. Wu 1116 Study on LPG Air Fuel Ratio Based on Improved Subtractive Clustering RBF Neural Networks Y.M. Lin, Z.P. Feng and H.F. Guan 1122 Effect of Oxide Film Thickness on Stress-Strain Field at the Tip of Stress Corrosion Cracking W. Tang, H. Xue and D. Zhao 1128 How Quality Influence User s Continuance of the Recommendation Blog C.M. Wu 1132 Study on Optimum Structure and Residual Stress of Ti/TiAl Micro-Laminated Sheet L. Ma, L.J. He, H.B. Wang and G.P. Wang 1137 A Design of the Processing Equipment Monitoring System Based on Infrared and Wireless Technology C.J. Yang and H.B. Kang 1141 Development of a Standing Wave-Tube System for Acoustical Property Measurement of Sound Absorption Materials Used on Vehicles Y.S. Wang, J.P. Zhou and Y.F. Xing 1146 Analysis of the Influence of Reinforcement Parameters on Springback of U-Shape Part Q.Q. Shi, J.P. Lin, M.K. Lv and K. Chen 1151

10 Key Engineering Materials Vols i The Phonetic Complex Data Based on FPGA T.J. Li 1156 Simulation and Validation of Temporal-Spatial 2-Dimensional Correlated Radar Clutter Based on SIRP T.J. Li 1161 A Method for Designing OLED Unit Template-Based Customization Technology Y.Y. Yao and L.P. Zhao 1168 Wireless Multicast Opportunistic Routing with Dual Network Coding P. Daru and Z. Han 1173 Phase-Space Wave Functions of Diatomic System in One-Dimensional Nanomaterials J. Lu 1179 Affine Texture Analysis with Scale-Area Histogram Q. Song 1183 Numerical Simulation and Analysis on Magnetizing Exciter for Magnetic Flux Leakage Q. Song 1187 Design and Synthesis of Er 2 O 3 Films for Antireflecting Coatings Y.Y. Zhu, R. Xu, Z.B. Fang, Y. Zhao, H.Y. Li, J. Chen and H.J. Cao 1191 Power Supply Prognostics and Health Management of High Reliability Electronic Systems in Rugged Environment Y. Guan, S.Z. Jin, L.F. Wu, W. Pan, Y.M. Liu and J. Zhang 1195 A Fast and Efficient Time-Delay Estimation Algorithm for Sound Localization G.Q. Liu, R.B. Zhang and D. Xu 1201 Method of Construction and Enumeration Steiner Triple Systems with Order 19 X.Y. Li, Z.D. Xu and W.X. Chou 1205 RBF Neural Network Based Adaptive Tracking Control for a Class of Nonlinear Plant Using Stochastic U-Model B. Wang, C. Liu, X.L. Wu and L. Liu 1209 The Stress Analysis of New Pressure Piping Model B. Wang, C. Liu, X.L. Wu and X.F. Qiao 1215 A Clustering Algorithm for Wireless Sensor Networks Basing on Distance and Distribution Y. Liao and W.X. Hao 1221 Preliminary Study on Application of Computer Color Matching Technique for Wood Dyeing W. Liu, Z.M. Yu and W.Z. Li 1228 Velocity Field in 90 Curved Duct of Cycle Section T. Sun, Y. Zhang, H.O. Sun and Z.Y. Wang 1233 Rehydration Performance of Binary Binders Made with Dehydrated Cement Paste and Phosphogypsum T. Sun, Z.H. Shui and T. Huo 1238 CFD Simulation of Curved-Roof Subjected to Thunderstorm Downburst B.Q. Cui and Y. Chen 1243 A Study on Computer Aided Ultrasonic Testing Scheme Planning J.T. Zhang, C. Tan and X.G. Shen 1249 Synthesis a New Photochromic Diarylethene Based on Five-Membered Heterocycle and Hexatomic Ring Aryl for Optical Storage S.Q. Cui, S.Z. Pu, G. Liu and W.J. Liu 1255 Synthesis, Properties and Application in Optical Memory of a New Photochromic Diarylethene M. Liu, W. Li, S.Z. Pu, G. Liu and S.Q. Cui 1259 A Computer Model of Bus-Waiting Problem S.G. Wu and J.Y. Wang 1263 Synthesis and Optoelectronic Properties of a Novel Photochromic Diarylethene Bearing a Six-Membered Aryl Unit Z.P. Tong, S.Z. Pu, S.Q. Cui and W.J. Liu 1268 Advanced Treatment of Stabilized Leachate by Sodium Hypochlorite Composite Chemicals H.Y. Zhang, H.T. Hu, Y. Zheng and D.H. Chen 1272

11 j Advanced Materials and Computer Science Integrated Method of Enhancing Image Quality for FPD-Based Cone-Beam Computed Tomography K.D. Huang, D.H. Zhang, F.L. Zha and M.J. Li 1277 Fuzzy Comprehensive Evaluation Method for Mechanical Seal Risk Assessment of Centrifugal Pumps Y.J. Hao and B.Q. Gu 1283 Study on the Chlorophyll-a and Primary Production in the Luanhe Beidaihe Estuary S.F. Wang, Y.L. Zhang and J. Li 1288 Microscopic Observation of White Band within Shear Zone of Chip Produced during High Speed Machining of AISI 1045 Hardness Steel C.Z. Duan, W.S. Kong, Z.X. Wang and M.J. Wang 1292 Simulation of Tree Motion Based on Vega Prime Z.L. Li and M. Zhang 1296 Type-2 Fuzzy Control of a Mobile Robot for Avoiding Moving Object J.G. Juang and C.H. Wu 1300 Developing Environmental Quality Evaluation Indexes for Mountain and Lake Tourism Attractions in Xinjiang H.J. Sun and X.G. Chen 1306 The Strategic Transformation and Structure Innovation of Xinjiang Tourism H.J. Sun 1311 Kinematical Analysis and Simulation of Upper Limb Rehabilitation Robot X.L. Cheng, Y.Q. Zhou, C.P. Zuo and X.H. Fan 1315 Effect of Sputtering Parameters on Structural and Photocatalytic Properties of N-Doped TiO 2 Films K.R. Wu, C.W. Yeh and J.K. Wu 1321 Predicting the Air-Conditioning Load under Drought Conditions Based on ELM Z.K. Wang, X.Y. Zhang, M.Y. Lai and B.P. Liu 1326 Programming of Automation and Trace Control for a Snake Form Robot P.S. Pa and J.M. Shyu 1330 A Novel Reconfigurable Cpw-Fed Slot Antenna Y.J. Yang, H.J. Sui and J.X. Chen 1334 An Optimal Inventory Model Based on the Effect of Time-Limited Free Back-Orders B. Zhang and D. Zhang 1338 A Level-Set Based Method for Vessel Navigation X.R. Lv 1345 Steam-Injection Pressing Technology of Man-Made Board X.G. Li, X. Zheng and H. Li 1351 New Constructions of Hierarchical Identity-Based Signature in the Standard Model Q. Wu and S.X. Sun 1356 Forecasting the Hebei Province Model of Foreign Trade of the Eco-Environment Based on GA-BP Neural Network J.N. Zhao and S.Y. Lu 1362 Analysis on the Ultrasonic Propagate for Partial Discharge in the Generator Stator Winding Y.M. Yang, F. Jiang, Z.L. Zhang and K.M. Lin 1368 Back - Analysis of Mechanics Parameters of Tunnel Based on Particle Swarm Optimization and Numerical Simulation A. Jiang and L. Peng 1373 Plantar Pressure Distribution Character of Diabetic Foot in Young Patients during Normal Gait M. Rong, Y.D. Gu and J.S. Li 1377 Research on the Transformer Phase Testing Methods T.J. Li, B.H. Ni, J. Wang, H.W. Lin and J.L. Wang 1380 First Principle Study on Hydrogen Diffusion in Degassing Y. Liu, B.D. Sun, Y.B. Dai and J. Wang 1384 Research on Passive Location Based on the Least Square Estimation Method T.J. Li, J.L. Han, Z.Y. Liu, Y.Z. Zhang and J.C. Ren 1388

12 Key Engineering Materials Vols k The Economic Evaluation System of the Highway Construction Projects Feasibility Study and its Computer Program Processing M.S. Li, H.Y. Wang and M. Ren 1394 Mechanical Analysis of Restored-Tooth Structure Due to Polymerization Shrinkage of Composite Restoration S.W. Zhu, J.P. Fan and G.P. Chen 1401 Vibration Analysis of Rotor System by Combined Adaptive Time-Frequency Analysis and Independent Component Analysis B. Li, Y. Guo, Y.C. Ding, T.W. Liu, J. Na and Y. Gao 1406 Design and Application of BOM Architecture in Electric Cabinet Company B.F. Liu 1412 Mathematical Model for Evaluating Cylindricity Errors by Maximum Inscribed Cylinder P. Liu and H.Y. Miao 1418 Semi-Active Control of Vehicle Suspensions with MRF Damper Based on Robust Control Theory Y. Liu, W. Jiang, Z.S. Jing, R.P. Zhang and Z.M. Liu 1423 Predicting Model of Blanking Process Noise by Hardness of Sheet Metals Y.D. Dai and X.F. Lu 1429 Analyzing Manufacturer s R&D Equilibrium in Defense Procurement S.L. Chen and X.D. Liu 1435 A New Network Security Evaluation Model Based on Multi-Data and Layer X.H. Ma 1440 ZARA-Based Design Management J.Q. Guan and G.Y. Zhang 1447 The Study on AD HOC Networks Security Solution R.G. Li 1451 A Chaos Particle Swarm Optimization Based on Adaptive Inertia Weight Z. Jie 1458 A Relational Database Complexity Computing Model X.Y. Lin 1464 Web Personalization for Chinese Travel Websites S.M. Pi 1470 A Novel Encryption Scheme for Digital Images Based on Compound Chaos Algorithm F.Y. Han, C.X. Zhu and C.S. Liu 1475 Switch Architecture with Wavelength Conversion in Optical Networks N. Zhang 1479 WDM Node Structure with GMPLS Technology in Optical Transport Networks N. Zhang and M.C. Ge 1483 Control Spatial Load Allocation and Resource Usage in Optical Communication Network N. Zhang and X.M. Xu 1487 Automatic Detection Method of Internal Waves Based on SAR T.J. Li, J.C. Ren, J.L. Han, A.H. Zhu and H. Zhang 1491 Efficient Synthesis and Properties of a Photochromic Diarylethene Bearing an Isoxazole Moiety H.L. Liu, S.Z. Pu, S.Q. Cui and W.J. Liu 1496 Business Process Reengineering Based on Workflow Technology H.C. Yang 1500 The Removal of In 2 O 3 SnO 4 Using a Round Bar-Shaped Micro Machining Tool for the Economic Recycling of Defective Displays P.S. Pa 1507 Syntheses and Properties of a Novel Unsymmetrical Photochromic Diarylethene D.H. Jiang, M.P. Wu, S.Z. Pu and W.J. Liu 1511 Photochromic Fluorescence Switching Diarylethene Flanking a Methoxy Group C.B. Fan, S.Z. Pu and W.J. Liu 1515 A Novel Unsymmetrical Photochromic Diarylethene W.J. Liu, Y. Lu and S.Z. Pu 1519

13 l Advanced Materials and Computer Science Research on Some Aromatic Schiff Base Compounds and Metal Complexes with Different Substituted Groups T.F. Jiao, J. Liu, L.H. Gao, J.X. Zhou and Y.Y. Xing 1523 Design and Investigation of Novel L-Glutamate-Based Schiff Base Compounds with Different Substituted Groups T.F. Jiao, J. Liu, J.X. Zhou, X.H. Li and Y.Y. Xing 1529 Modeling and Simulation of a planar precision positioning tables Y. Zhang, H.Z. Sun and H. Zhou 1534 Application of Clarke-Wright Saving Mileage Heuristic Algorithm in Logistics Distribution Route Optimization Y.K. Sheng and W.L. Lan 1538 Synthesis, Kinetics and Electrochemical Properties of a New Photochromic Diarylethene S.Z. Pu, R.J. Wang, H.Y. Xia and G. Liu 1543 Efficient Synthesis, Photochromic Properties and Application of a New Unsymmetrical Diarylethene R.J. Wang, H.Y. Xia, S.Z. Pu and S.Q. Cui 1547 The Material Selection in Green Design C.Q. He and B. Ji 1551 Synthesis and Properties of an Unsymmetrical Diarylethene Bearing a Chlorine Atom L.Q. Wang, S.Z. Pu, L.S. Yan and W.J. Liu 1557 Synthesis and Property of a Novel Diarylethene Based on Benzofuran and Thienyl Units for Polarization Optical Recording T.F. Wang, S.Z. Pu and S.Q. Cui 1561 Synthesis and Properties of a New Diarylethene Derivative P.J. Yan, D.H. Jiang, S.Z. Pu and W.J. Liu 1565 Session 3: Automation, Mechatronics and Robotics Synthesis and Property of a New 2,4-Position Hybrid Diarylethene Bearing both Benzene and Isoxazole Moieties H. Li, S.Z. Pu, G. Liu and W.J. Liu 1569 What Factors Affect People's Stickiness on the Social Network Site? The Case of Facebook in Taiwan C.M. Wu 1573 Validity of Definition Assessments for Motion Blur Identification S.B. Xiang, J.P. He and G.D. Su 1578 Comparison Study on Two Energy Control Strategies of Plug-In Hybrid Electric Vehicle Q.S. Shi, X.P. Zhang and L. Wu 1583 Fault Tree Analysis of Centrifugal Compressor J.F. Zhu 1587 Optoelectronic Properties and Holographic Optical Recording of a Unsymmetrical Diarylethene Having a Pyrrole Unit G. Liu, M. Liu, Q. Zhang, S.Z. Pu and W.J. Liu 1591 Synthesis and Photochromism of a Novel Diarylethene in PMMA Amorphous Film and in Hexane Solution C.H. Zheng, S.Z. Pu, G. Liu and W.J. Liu 1595 Influence of Conversion Deviation on Dynamic Performance of High-Speed Railway Turnout R. Chen, P. Wang and X.K. Wei 1599 Wear and Mechanical Properties of Short Carbon Fiber Reinforced Copper Matrix Composites L.W. Yang, Y. Dong and R.J. Wang 1605 Calculation of Services Value for Grassland Ecosystem in HulunBuir City R.J. Wang and L.W. Yang 1611 A Method for Web Services Fault Tolerance Based on Ripple Effect Analysis D. Yang, L. Liu and M.B. Llinares 1617 Ontology Modeling of Manufacturing Resources J.Y. Wei, P.S. Zhong and C.F. Guo 1621

14 Key Engineering Materials Vols m Envelope Analysis of Gear Faults Based on Spectral Kurtosis T.W. Liu, Y. Guo, B. Li, Y.C. Ding and H.W. Zheng 1626 Application of Dynamic Programming in Resources Optimization Allocation of Factory Production Line J.H. Wen, H.L. Jiang, M. Zhang and X. Yu 1632 Study on Color Classification of Pork with Computer Vision System Based on Different Color Difference Formula H.X. Zhao, Z.Y. Luo, X. Yuan and Y. Li 1638 Thermodynamic Analysis of Refrigeration Cycle Performance with R125/R600a Mixtures F. Wang, X.P. Zhang, F.K. Wang, X.W. Fan and Z.W. Lian 1643 Research on Coherence Structure Construction for Chinese Text Y.M. Chen, X.Z. Lou, J.W. Zhan and S.Q. Wu 1648 Customer Satisfaction of Online Music Services in Taiwan S.M. Pi 1652 Heating Performance of Zeotropic Mixture and Temperature Glide Matching with Secondary Fluid X.P. Zhang, F. Wang, H.L. Duan and A.D. Chen 1657 Performance Analysis of Hydrostatic Slideways Systems with Different Types of Restrictors S.H. Zhou, J.C. Song, Z.W. Zhang and S. Li 1661 Dynamic Adaptive Harmony Search Algorithm for Optimization Y.W. Wang and M. Yao 1666 Preparation of TiO 2 Nanoparticles in the Solvothermal Method L.Q. Wang, X.N. Yang, X.L. Zhao, R.J. Zhang and Y.L. Yang 1672 The Analysis of Output Power of a Laser Diode Based on the Difference Method B.Y. Garidi, J.R. Yang and H.A. Ye 1678 Power Aware IP Lookup Architecture and Algorithm for Green Router B. Yuan, B.J. Wang and B. Zhao 1684 Research on the Grey Assessment Method of Dam Failure Risk Y. Jiang and Q.W. Zhang 1690 Rotary Ultrasonic Motor Using Longitudinal and Bending Modes and its Analysis J.K. Liu, Y.X. Liu, W.S. Chen and S.J. Shi 1696 An Improved Noise Reduction Based on Wavelet Threshold J.H. Xi and J. Chen 1701 Design and Simulation of Emulsion Winch Based on Virtual Prototype X. Zhang, M. Zang, X.Z. Liu and Z.C. Wang 1706 Influence of Excess Bi 2 O 3 and Na 2 Co 3 on Crystal Structure and Microstructure of Bismuth Sodium Titanate Ceramics P. Sittiketkron, A. Klinbumrung and T. Bongkarn 1711 The Model of Reliability for a Repairable System X. Xiao, J.B. Li and L. Ma 1715 A Method for Bouncing Compensation of Pre-Tensioned Frame in AGC Control System of Hydraulic Leveler Y. Hu, X.H. Hao, Q.X. Huang and Q.S. Wang 1720 Synthesis and Characterization of ZnO Nanoparticles in the Method of Precipitation L.Q. Wang, X.N. Yang, Y. Han, R.J. Zhang and Y.L. Yang 1725 A CAE/CAI Integrated Method for Sheet Metal Forming J. Liu, S.Y. Cheng, S.Y. Li and X.W. Zhang 1730 Non-Cylindrical Fuselage Structural Optimization of BWB Civil Aircraft Y.J. Zhang and B.T. Wang 1736 Research on the DSP- Based Grid-Connect Inverter for 3kW Fuel Cells Q.H. Chen, J.Q. Wang and L. Huang 1740 The Effects of MWTs Characteristics on User Satisfaction in Mobile Government Systems Z.J. Chen 1745 Design and Finite Element Analysis on Crown Gear Coupling of High Torque Considering Radial Restriction P. Wang, Z.J. Zheng and J. Zhang 1750

15 n Advanced Materials and Computer Science Optimum Sintering Temperature for Fabrication of 0.8Bi 0.5 Na 0.5 TiO 3-0.2Bi 0.5 K 0.5 TiO 3 Lead-Free Ceramics by Combustion Technique A. Thongtha and T. Bongkarn 1754 Using Genetic Algorithm to Help the Seller Strategies in Online Auction M.J. Tsai and T.Y. Huang 1760 A Novel ECC-Based RFID Authentication Protocol M.W. Fang, J.J. Wu, X.F. Zhang and H. Chen 1764 Cellular Differential Evolution for Optimization G.W. Hu and X.Y. Du 1770 Using Chemical Coprecipitation Method to Prepare Magnetite Magnetic Fluids and Explore its Applications in Hyperthermia C.S. Tsai, H.Y. Chen and K.P. Chang 1776 Chord-Based Indexing Model to Support Complex Query and Load Balancing X.M. Zhao, F.A. Liu and S. Qin 1781 A Case Study of Distress Detection and Treatment of Loess Road Tunnel J.X. Lai, G.L. Zhang and X.W. Liu 1787 Adaptive Blind Equalization with Variable Step-Size Modified by Attenuation Function Y. Xiao and Z.X. Li 1792 FTIR/ATR Spectroscopy Analysis of COD in Wastewater Based on Combination Optimization of SG Smoothing Modes and PLS Factor T. Pan, Q. Ji, Y. Han and P.Z. Li 1797 Modular Network in Manufacturing Industry and its Competitive Advantages H.J. Cao and H. Zhang 1802 Multi-Objective Optimization of a Piezoelectric Sandwich Ultrasonic Transducer by Using Elitist Non-Dominated Sorting Genetic Algorithm B. Fu, Y. Jing, X. Fu and T. Hemsel 1808 Maintenance-Free Technologies on Digital Methane Detection System X.H. Zhang 1813 Bandwidth Guaranteed Multicast Scheduling for Buffered Crossbar P. Wang, S.Q. Chen and H.C. Hu 1819 Investigating Vocational High School Students Cognitive Load of Infusing Nanotechnology into Electronics Subjects C.Y. Dai, S.Z. Lin and C.H. Yeh 1825 A Scalable Heuristic Based on Hypercube Graph for Automated Planner H. Qian, M.X. Sui, Y.F. Jiang, D.H. Zhang and H. Guo 1830 The Research of Scrub on the Performance of Diatomite J.T. Chen, Y.X. Han, L. Liu and S.L. Zheng 1836 Effects of Vocational School Students Web-Based Collaborative Learning on Diagnosis and Repair in Automobile Electrical Systems Cases of Starting, Charging and Ignition Systems C.Y. Shin, Y.W. Guo and R.G. Chung 1840 The Way of Selection Antenna in Distributed Wireless Communication System G. Wang and J.P. Xu 1849 Sensitivity Analysis of Large Unit Spiral Case for Different Reinforcement Arrangement X.Y. Xu, J.W. Wang and Z.Y. Ma 1855 Design of Image Classification System Based on Feature Extraction G.N. Guo, M. Chu, X.H. Wang, X.B. Huang and Z. Wei 1859 Public Watermark Detection Resistant to Sensitivity Attacks H. Wang and S.M. Wei 1865 Numerical Simulation of Penetration Effect of Spherical Fragment on Square Honeycomb Sandwich Plate T. Wang, W.L. Yu, S.Q. Dong and Y.L. Gao 1869 A Customer Credit Visual Analytics Model Based on Markov Logic Networks Z.Z. Chen and Y. Chen 1874 The Research of SiC and Si 3 N 4 Whiskers Reinforced Si 3 N 4 Composites to Improve its Wear and Mechanical Properties L.W. Yang, J.H. Li and R.J. Wang 1881

16 Key Engineering Materials Vols o The Environmental Management and Corporate Social Responsibility of Small and Medium-Sized Enterprises: A Marginal Strategic Challenge? H. Wang 1887 Designing of a CCD Sensor for On-Line Non-Touch Monitoring Roller Wear Y. Guo, L.S. Wei and X.F. Dai 1893 Research on Relationship of Electronic Business and Logistics Y.K. Sheng and W.L. Lan 1897 University Digital Piano the Innovation of Teaching Methods and Practice J. Zhu 1899 Multimedia Music Teaching System Application J. Zhu 1903 How Consumers Characteristics Impact their Online Purchase Intention: A Literature Review Y. Yang, Z. Fang, P.F. Ji, J. Cai and W. Li 1909 Research on Visual Production Process Control System Oriented to Discrete Manufacturing W.G. Li, X.L. Liu and D.C. Sun 1914 The Influence of the Curved Transition on the Coach Roof Cross Beams in Rollover Crashworthiness F.L. Shen, J.L. Jiu, Z.K. Li, X.L. Xie and Y.H. Mao 1920 MIDI and Music Teaching in Colleges of Multimedia System Application J. Zhu 1926 A Computer-Aided Approach to Undergraduate Engineering Education W. Wang, S.J. Jia, S.C. Liu and H.Y. Wang 1931 Chondrogenic Ability of Bone Marrow Mesenchymal Stem Cells in Alginate and Collagen Sponge J. Wu, G.H. Wang, H. Zhang, Y.P. Wu, Y.C. Lv, J.S. Liu, J.K. Ma and J. Zhu 1935 Effect of Titanium Particle Size on Osteogenic Differentiation of Bone Marrow Derived Mesenchymal Stem Cells J. Wu, Y.Q. Guo, X.L. He and H.Q. Chen D Interaction Design and Implementation in Virtual Spinal Fixation Surgery System H.Z. Song, B. Liu and B. Zhao 1943 A Survey of Diagnosis Method for Interconnect in SRAM-Based FPGAs J. Zhang, N. Zhang, X.M. Zhu, Y. Guan and Y.M. Liu 1949 A Self-Adaptive Grid Resource Selection Algorithm N. Qi, X.J. Zhang, B.Q. Wang and J. Guo 1955 Decision Based on Fuzzy Multi-Objective Programming Method of High-Tech Investment Portfolio T. Wang and L.F. Li 1961 Analysis on Cooperative GBN-ARQ Performance in TDMA Single Source and Single Relay Network L.B. Dong, K.C. Yi, Z.Q. Li and P.Y. Shen 1966 Improved Large Spring / Stiffness Technique for Dynamic Response Analysis of Structures Subjected to Base Excitations G.L. Zhou, X.J. Li and X.B. Peng 1974 Kinematic Analysis of Feed-Dog Mechanism in Overlock Machine Y.Q. Han, F.Z. Li and B. Guo 1980 Classification of Multi-Types of EEG Time Series Based on Embedding Dimension Characteristic Parameter Y. Yuan, Z.Q. Huang and Z.M. Cai 1987 Simulation Study on Wastewater Quality of Dongfeng Ditch with Artificial Constructed Rapid Infiltration System P.S. Qiao and L. Li 1993 Research on a Remote Network Monitoring Model for Large-Scale Materials Manufacturing X.H. Zeng, M.H. Li and W.L. Luo 1999 Estimation on Flux and Power Consumption of Twin Screw Pulping Extruder Based on Dimensional Analysis P. Wang, K.H. Guo, Z. Lan and D.K. Hu 2004

17 p Advanced Materials and Computer Science Research on Weight Reduction Design of the Drive System X.Y. Shen, P. Wang and J. Yao 2008 Experiments on Specific Energy and Pulping Quality of Extrusion Mechanical Pulping X.Y. Shen, P. Wang, J. Zhang and G.S. Wang 2012 Research on the Advantages of Nanofibrous Air Filtration Membrane H. Wang, Z.Y. Yang, J.Y. Liu, G.F. Zheng and Y.P. Liu 2016 A Multi-Enterprise Dynamic Scheduling Model Based on Multi-Agent System J.H. Zhao and J. Lin 2020 Analysis and Design on PBL System Based on Multi-Agent C.F. Zhang, M.Y. Li, J.H. Wei and W.L. Li 2026 Experimental Study on Dynamic Compaction-Plastics Drain Board Method in Backfill Subgrade Reinforcement Y. Ma, M.T. Luan and Z.C. Wang 2032 A Method of License Plate Location Based on Gray Images and Binary Images Z.S. Dong, Y.J. Wang and J.C. Zeng 2037 The Analysis and Detection of Double JPEG2000 Compression W. Wang and R.D. Wang 2043 Energy Environment and Economic Sustainable Growth L.F. Zhang and Q. Liu 2049 Research on Natural Characteristics of Helical Gear in Gearbox for Wind Turbine Generator J.G. Wang, Y. Wang, Y.T. An, Q.L. Huang and M.L. Xu 2054 Research of Magnetic Stage Control System Based on DSP Y. Zhang, S.L. Wei and H.Z. Sun 2058 Finite Element Analysis of Hybrid Ceramic Ball Bearing Contact B. Guo, Y.Q. Han, W.J. Lei, H.B. Wei and F.Z. Li 2064 A Text Hybrid Clustering Algorithm Based on HowNet Semantics Z.Y. Zhu, S.J. Dong, C.L. Yu and J. He 2071 Anti-Stealth Radar with Spread Spectrum Technology L.Q. Fu, L.S. Yang, H. Tang and Y.N. Ma 2079 Application of Hyper-Dispersant in PP/OMMT Composite X.Y. Yang and R.Z. Wang 2085 Research on Building Engineering Materials Supplier Selection Based on ANP Method X. Chen, X.F. Zhou and Y. Zhang 2089 Application of CMAC-PID Controller Based FPGA in the Wastewater Treatment L. Li, Y.X. Shan, H.T. Shi and X.G. Wang 2095 Robust Control for Uncertain Unified Chaotic Systems with Input Nonlinearity via Improved Sliding Mode Technique X.J. Wu and X.L. Wu 2100 Generalized Projective Synchronization for Fractional-Order Chaotic Systems with Different Fractional Order P. Zhou and R. Ding 2106 Preparation and Properties of Polyethylene/Montmorillonite Composites X.Y. Yang 2110 Fatigue Life Prediction Based on GA-BP Algorithm G.Q. Zhang and H.B. Lin 2114 An Improved Crawler Algorithm Based on Hierarchical Structure Preservation Z.F. Hao, Z.B. Zhang, Z.Q. Cai and H. Huang 2120 Application of DCP to Evaluate Subgrade Compaction Quality P. Xu and Y.C. Cai 2125 DDoS Detection and Prevention Based on Joint Entropy and Conditional Entropy Y.H. Gu and W.M. Wu 2129 Effect of Nanocrystalline and Ti Implantation on the Oxidation Behaviour of Fe 80 Cr 20 Alloy and Commercial Ferritic Steel D. Sebayang, D.S. Khaerudini, H. Saryanto, M.A. Othman, T. Sujitno and P. Untoro 2134 The Study of Forest Fire Color Image Segmentation S. Li and H.E. Ren 2140

18 Key Engineering Materials Vols q The 3-D Simulation of the LNGC in Pre-Cooling Process Z.C. Wang, X.Y. Liu and A.K. Kan 2146 Based on RFID Food Supply Chain Traceability System Framework Design X. Li and P.C. Liu 2150 Analytic Solutions of a Nonhomogeneous Iterative Functional Differential Equation L.X. Liu 2155 Research on Impact of Radio Irregularity on Self-Localization of WSN J. Zhang, H.Y. Zhang, J.N. Lv and L.Q. Yin 2161 Informationization Modes Study for Discrete Manufacturing Enterprises in China X.J. Ren 2167 A High Throughput GALS Wrapper with Virtual Channels S.T. Shang, X.G. Guan and Y.T. Yang 2171 Development and Application of Driving Devices for Space Environment J. Wen, S.H. Xu, Y.C. Wang and T.F. Liang 2177 Image Registration of Blown and Swayed Trees D.Y. Han and X.Y. Huang 2183 In Situ Synthesis of TiO 2 Nanoparticles in Xylem Cell of Living Trees under Ambient Temperature J.T. Shi, Q.F. Sun and J. Li 2189 Constructing Phylogenetic Tree Based on Three-Parameter Model P. Guo, G.F. Chen and Y.X. Wang 2193 A Fog-Removing Treatment Based on Combining High-Frequency Emphasis Filtering and Histogram Equalization X. Zou, Y. Liu, Z.F. Tan, C.S. Tu and H. Zhang 2198 A CAPTCHA Image Recognition Algorithm Based on Edit Distance P. Guo, Y.W. Deng and H.Y. Zhang 2203 Analytic Solutions of an Iterative Functional Differential Equation L.X. Liu 2208 An Effective Simulated Annealing-Based Mathematical Optimization Algorithm for Minimizing the Lennard-Jones Potential G.C. Li 2213 Design and Implementation of Hainan Tourism Spots Virtual Reality System F.X. Wang 2217 An Effective Genetic-Based Mathematical Computation Algorithm for Minimizing the Lennard-Jones Potential G.C. Li 2221 The Study on the Network Teaching Mode of Tourism Management in the Background of Hainan International Island Construction F.X. Wang and S.C. Fan 2225 Application of Particle Swarm Optimization in Cylinder Helical HGearH Multi-Objective Design Y.B. Mo, J.Z. Liu, B.L. Wang and W.M. Wan 2229 (2,1)-Total Labelling of Trees H.N. Sun 2234 Research on Selecting Public Investment Project Based on a Decision Support System H. Zhao and L.M. Chen 2239 The Evaluation Model of the Hydropower Project Financing Risk Based on AHP-RS and RBF Neural Network H. Zhao and L.M. Chen 2243 Secure Range-Dependent Localization in Wireless Sensor Networks J. Zhang, H.Y. Zhang, J.N. Lv and Y.C. Liu 2247 Assembly and Motion Simulation of Turntable of Drilling Rig Based on SolidWorks J.P. Wang, Q. Shang and Z.F. Bao 2253 Design of the Pinch Machine for Battery Grid Continuous Casting Machine Based on Link and Floating Gear Mechanism C.Y. Gao and W.Q. Li 2258 A Novel Emergence Model of Public Opinion Based on Small-World Network Y. Wu, Y. Yao and L. Wang 2263