Table of Contents. Chapter 1: Advanced Mechanical Engineering. Preface, Sponsors and Committees

Size: px

Start display at page:

Download "Table of Contents. Chapter 1: Advanced Mechanical Engineering. Preface, Sponsors and Committees"

Peter McCoy
5 years ago
Views:

1 Table of Contents Preface, Sponsors and Committees Chapter 1: Advanced Mechanical Engineering MPA Method Simplify Evaluated Frame Structural Damage J. Ren, Z.Y. Wang, C.Y. Jiang and Y. Wang 3 The Study of Forward Slip Model in Round-Oval-Round Bar Rolling J.L. Zhou, C.G. Pan, B. Lv and H. Wang 8 Research of Data Processing Methods for Metal Cutting Finite Element Analysis Results M. Cong and J. Song 14 Comparatively Analysis of Domestic and International Development of Defects Safety Assessment for Pressure Vessels Y. Han, Y. Dan and X.M. Han 19 Experimental Study on Pool Boiling Heat Transfer Characteristics of Porous Surface Tube Y. Li, K.L. Zhang, H.K. Tao and W.J. Lv 24 Optimization of the Engine Hood to Reduce the Head Injury during the Vehicle-Human Collision Y.X. Wang, Q.C. Wang, J.R. Fu and H.H. Qiao 29 Experiment on Water Hammer Protection Performances of the Shuttle Check Valve in Multi-Pump Parallel Connection System H.B. Meng, Y. Liu and Y. Li 37 The Application of Adaptive Kalman Filter Technology in Aspheric Surface Machining and Detection X.C. Zhang, G.H. Cao and F.M. Nie 42 Test and Study of Soybean Storage Anti-Grading Device F.C. Yuan, Z.Q. Wang, H.M. Han and Y. Wang 46 A Mathematical Model for Thin-Layer Drying of Litchi Pulp Z.Q. Guan, X.Z. Wang, M. Li and X.Q. Jiang 51 Parameter Identification of Tailplane Iced Aircraft Based on Maximum Likelihood Method Z.D. Xu, Y.H. Cao and M. Zhao 57 Ice Shape Prediction Based on an Improved Thermodynamic Model C. Ma, Y.H. Cao and X.X. Chu 63 Experimental Research on Vibration Transmission and Isolation for Ship s Seawater Piping System Y. Liu, H.B. Meng and W.J. Lv 68 Study on Simulation Analysis of XXX Machine Cutting Chatter Y.C. Liu, Z.P. Liu, Y. Jin, Z.Q. Sheng and Y.X. Liu 73 Failure Analysis of Commercial Vehicle Crankshaft: A Case Study S.Z. Bai, Y.P. Hu, H.L. Zhang, S.W. Zhou, Y.J. Jia and G.X. Li 78 Design of Bending Deflection of Pipe Test Bed J. Wang and Y.M. He 83 Study of Relationship of Release Parameters and Practical Influential Factors in Mechanics Models of the Distance of Shot Putting B. Zhang 89 A Mechanical Research on the Factors of Lob Shot of Football F. Li 94 Application of Reliability Centred Maintenance in Decreasing the Probability of Severe Accidents for the Stream Boiler J.B. Geng, G.W. Chen and L.K. Sun 98 Simulation Analysis of Five-Roll Covering Rollers System for Binding Machine of Section Steel Bars Y.Y. Xu, F.H. Wang and Y. Teng 102 Design of a New Suspension System Controlled by Fuzzy-PID with Wheelbase Preview P.K. Wong, S.J. Huang, T. Xu, H.C. Wong and Z.C. Xie 106

2 Precise Detection Technology W.L. Peng, W.G. Feng and Y. Su 111 Motion Analysis of 35 Tons Steel Coil Overturning Machine based on COSMOS Motion F.H. Wang, H.B. Li and B.Y. Ma 114 Study on the Strategies for Fabrication of Die Assembly with Typical Shaped Cavity by Using Electrical Discharge Machining R.Y. Feng, M. Wang and Z.J. Duan 118 Research on Hydraulic System of Speed Forging Hydraulic Machine H.Y. Yu, J.L. Tang and J. Hu 123 Based on the Force Characteristic Curve to Analysis Power Steering Gear Performance G.Z. Jia, Z.H. Jia and X.P. Wu 128 Simulation Research of Natural Gas Injection Timing on Combustion Process in a Diesel Engine Fueled with Pilot-Ignited Directly-Injected Natural Gas N.N. Li, S.H. Li and X.X. Li 132 Using Force/Torque Balance Equations and CAD Variable Geometric Approach for Solving Active Force and Passive Force of a 3UPU-I Spatial Parallel Manipulator Y. Ye and N. Liu 139 Virtual and Optimized Design of Mechanical Arm of Forestry Felling & Cultivation Machine Z.G. Wei, M.Y. Deng and J.H. Liu 144 Research on Integrated and Portable Weigh-in-Motion Scale L. Hao 149 Analysis of New Type Repulsion Mechanism Performance Y.S. Xu and L. Kong 154 Study on Statistic and Analysis of Types of Slots Centering Relation S.H. Liang 159 Dynamics Analysis of Model 150 Diesel Engine Piston J.L. Zhai and T.X. Su 164 Design of Optical Perfection of Flame Detector Y.Y. Wang, Z.B. Mei, F. Xu and X. Zhang 169 Study on Sensor-Based Comprehensive Detector of Conveyor Belt Bearing Surface Tearing Y.J. Xue 174 Large-Diameter Line Pipe Expanding Process A.X. He and R.C. Li 180 Static and Dynamic Performance of High-Speed Vertical Machining Center Spindle Box R.C. Li and A.X. He 185 Numerical Simulation of Flow Field within Mutational Section Pipe J.H. Zhang, K. Hu and Y.F. Xu 190 Scenario Selection and Analysis of Armored Vehicle Refrigeration System Using Engine Wasted Heat S.H. Zhou, J.W. Xing and J.W. He 196 Hydraulic Sytem for Wave Compensation of Deep-Water Exploration Ship Z.X. Chen and S. Liu 201 Parametric Analysis in Tug-of-War Based on Ideal Biomechanical Model B. Zhang 207 Workspace Analysis and Calculation for the Manipulator of a Explosive-Handling Robot in Mine H.B. Tian, A.M. Li and F.R. Kou 211 A Thermoelectric Modules Voltage Monitoring System Used in Automobile Exhaust Thermoelectric Generator R. Quan, X.F. Tang, S.H. Quan and L. Huang 217 Test Design on Minicar Transmission System Efficiency Using Dimensional Analysis W.P. Wang and Y.M. Mo 222 On the HIL Simulation via LOS Angle for MMW Guidance J. Wang and P. Li 227 Vibration Analysis of Coupled Faults Diagnosis in a Rotor System Using Wavelet De- Noising and KPCA Data Fusion X.M. Zhu 233

3 b Advanced Mechanical Engineering II The Design, Numerical Simulation and Experimental Research on Low Resistance Diffluence T-Junction H.K. Tao, Y. Zhou, Z.G. Wei, H. Zhang and Y. Li 237 Research on Integrated Onboard Charger for Electric Vehicle G.Z. Jia, Y.C. Li and G.L. Qiao 242 The Study on Metrication Equation of Low Probability of Intercept Radar Signal Based on Input Parameters Y.H. Zhang 247 Chapter 2: Advanced Material Science Simulations of Dynamic Fractures on a Brittle Material C.Y. Huang and X. Huang 255 The Discovery of Direct Noncovalent Bonded Interaction between Keap1 and Diethyl Maleate through Molecular Dynamics Simulations X.L. Lu, S.C. Chen, Y. Zhang, L. Zhang, H.S. Liu and B. Gao 260 Printability Research and Vision Health Impact Assessment of Printing Material Based on Paper Brightness Z.J. Li, K.S. Zhang and X. Zhang 266 Research on Synthesis of Benzoic Acids Intermediates S.X. Zhang 270 The Research on New and High-Grade Screen-Printing Ceramic Decal Paper under Glaze Color of once Firing B.F. Yu 275 Research for Straightening of TC4 Alloy Wire Rod Based on Horizontal-Vertical Roller System C. Zhang, J.C. Feng and M.H. Chen 280 Purification and Characterization of an Alkaline Protease from Bacillus alcalophilus S.S. Liu, L.L. Wang and L. Yuan 285 Study on the Properties of MWNTs/Polyethylene Nanocomposites by In Situ Polymerization S.Y. Li and D.S. Hu 289 The Prospect of Nano Vegetable Transformer Oil P.F. Xu 293 Chapter 3: Advanced Digital Enterprise Evaluating Operational Effectiveness of Air and Missile Defense Warhead Based on LMBP Neural Network X.M. Han, J.J. Chen and K. Jiang 301 Research on YH30 Hydraulic Press Parts s Model Expression Based on XML Q.H. Wang, T. Zhang and Y.D. Dong 306 PMP-Based Micro-3D Dental Measuring Technology Z.W. Li, C. Ma, C.L. Liu, C.J. Wang, K. Zhong and Y.S. Shi 310 Application of FPGA-Based Large-Screen and High-Resolution Display Accelerator in Computerized Flat Knitting Machine J.Y. Huang, M.Y. Gao and H. Cai 318 Realization of Angular Position Control System on Multi-Degree-of-Freedom Welding Robot J.L. Zhai, J. Li and R.H. Gao 323 The Study on Isolated Power Control System Based on Coordinated Control Y.S. Xu 328 Measurement System for Soil Complex Resistivity Based on LabVIEW Y. Zhu, Z.C. Wang, C.X. Nai and L. Dong 333 Design and Study on Analog Modulation Signal Source Based on AT89C51 Microcontroller W.P. Zhang 341 Stability of Neutral Stochastic Delay Differential Equation R. Hu and D.J. Shao 346

4 Applied Mechanics and Materials Vol. 192 c Research on Optimal Weight Choice of Multi-MEMS Gyroscope Data Fusion Y.F. Ren, Y.W. Ge and X.C. Bai 351 Research on Stochastic Modeling of MEMS Gyroscope Y.F. Ren, X.C. Bai and Y.W. Ge 356 Permanent-Pressure Control Tactic of Rudder Based on Fuzzy-Control Theorem X.G. He, J.F. Xing and J. Chen 360 The Application of WiMAX and Mesh Network Technology at Fire Communication Z.P. Wang 365 Study on Design and Implementation of Integrated Access System of Intelligent Transportation Q. Long, Z.F. Huang and J.F. Zhang 370 Research on Parameter Tuning Method for Numerical Control AC Servo Control System H. Zheng 375 A New Power Flow Control and Management Method Based on Multi-Line Transmission/Distribution Networks Y.S. Xu 380 Research on the 802.1x Authentication Mechanism and Existing Defects X.G. Wang 385 The Research of Active Cancellation Stealth System Design S. Xu, Y.M. Xu and J. Huang 390 Research on Intelligent Fault Diagnosis System Based on Numerical Turning Machine T. Zhang, Q.H. Wang and J. Han 397 Improved Localization Algorithm Based on Proportion of Differential RSSI K.S. Zhang, Y.M. Xu, W. Yang and Q. Zhou 401 The Application of Linear Algebra Algorithm in the Production of Linear Matrix Inequalities H. Zhang 406 Chapter 4: Advanced Manufacturing Processes Research on Quality Management of Manufacturing Equipment Welding Technology D.C. Li 415 Can Law of Conservation of Energy Be Broken? D.H. Chen 420 Study of Oceanic Suspended Particles Density Detecting Technology Based on Mie Scattering Theory H. Lin, X.M. Wang, C.L. Zhou and W.Z. Li 425 Protection and Symbolization Innovation of Manufacturing Process of Blue and White Porcelain F. Zhu and J. Shao 430 Study on the Construction Technology of the Complex Steal Structure of the International Conference Center W.L. Bao and F.K. Wang 435 The Research and Application of Auto-Focus Based on Hi3515 Y.L. Liu, J.J. Guo and F.M. Zhao 440 Preliminary Research of Environmentally Friendly Taxi Based on Comprehensive Evaluation in Macau SAR L.M. Tam, P.K. Wong, H.Y. Lao and Z.C. Xie 445 Study on Strategies of Automatic Equipment Maintenance Based on Reliability in Petrochemical Enterprises Z.M. Zhou 450 The Application of Hybrid Design Method in Car Body Design S.Y. Hou 455 The Application and Research of Flexible Design in Modern Furniture Manufacturing X. Yang 460 The Study on Mechanical Design Based on Collaborating Method Using Grid R.Y. Feng, Z.J. Duan and M. Wang 465

5 d Advanced Mechanical Engineering II Research on Nano-Technology and Military Modernization X.Y. Wang, X.C. Lu and Y. Ren 470 The Product Design for Babies or Children in Ergonomics Perspective M.M. Deng and W. Yang 475

Innovative Research in Hot Stamping Technology

Innovative Research in Hot Stamping Technology Advanced Materials Research Vol. 1063 Innovative Research in Hot Technology Selected, peer reviewed papers from the 1st International Conference on Hot of UHSS (ICHSU 2014), August 21-24, 2014, Chongqing,