TNF CAPILLARY THERMOMETERS
|
|
|
- Kathleen Ramsey
- 6 years ago
- Views:
Transcription
1 TNF CAPILLARY THERMOMETERS Flow Pressure Level Temperature measurement monitoring control T2 Gas Filled Capillary Thermometer Dial Sizes: 2.5, 3, 4, 6 and 10 All Stainless Steel Construction Ranges: -40 to 100 F Through 32 to 1100 F Available w/ Up to Four Switches USA KOBOLD Instruments Inc Parkway View Drive USA-Pittsburgh, PA Fax info@koboldusa.com CANADA KOBOLD Instruments Canada Inc. 9A Aviation Pointe-Claire, QC H9R 4Z Fax kobold@kobold.ca Visit KOBOLD Online at Model: TNF r1_2-14
2 The KOBOLD TNF capillary thermometers are highly versatile and rugged gas filled thermometers for industrial applications. The capillary design allows for mounting of the indicator remote from the sensing probe. The TNF is available as a simple temperature indicating device or as a controller with up to four adjustable setpoints. The thermometer operates on the nitrogen gas principle. The sensing bulb is filled with inert nitrogen gas. Any temperature change at the bulb will result in a change in nitrogen pressure. This pressure is sensed in the indicating mechanism and displayed as a change in temperature. Capillaries are available in stainless steel and stainless steel with flexible stainless steel armor sheath. A variety of indicator housings are available with wall mounting brackets or panel mount flanges. The TNF is available with glycerin filling for applications in which vibration is present. The TNF is also available with dial sizes ranging from 2.5 to 10 inches. A variety of fittings are available to suit almost any application. Specifications Available Ranges Celsius: -20 to +40 C through 0 to +600 C Fahrenheit: -40 to +100 F through 32 to F Over-range Limit: 1.3X Full Scale Maximum Pressure: 350 PSIG Available Dial Sizes: 2.5, 3, 4, 6, 10 Accuracy: 2.5 and 3 : ±1.6% of full 70 F ambient 4, 6 and 10 : ±1% of full 70 F ambient Materials of Construction Measuring Probe 2.5, 3 and 10 Dial: 304 stainless steel 4 and 6 Dial: 316-Ti stainless steel Capillaries: 316-Ti stainless steel or 316-Ti stainless steel with 304 stainless steel armor Indicator Housing 3 and 10 Dial: Black painted steel or stainless steel depending on model code TNF Series Capillary Thermometers 4 and 6 Dial: Aluminum or stainless steel depending on model code Indicator Movement: 304 and 316-Ti stainless steel Dial & Pointer: Aluminum Protection Aluminum & SS Housing: NEMA 4X/IP 65 Steel Housing: NEMA 3R/IP 54 Switch Specifications (optional) Available Switch Types: Sliding contact, magnetic spring contact, inductive Sliding Contact Ratings: 250 VAC/VDC, 10 watts, 0.6 amps Max Magnetic Spring Contact Ratings: 250 VAC/VDC, 30 watts, 0.6 amps. Max Inductive Contact Ratings: NAMUR according to DIN Note: Switches available for 4 and 6 housings only TNF Model Code Key TNF F E - 1A D - M11 L=XXX Model Diameter Case material Range Capillary Probe/Connection Options Switch Measuring Probe Length Use Table 1 through 6 on the following pages to completely specify your model number.
3 TNF Capillary Thermometer Ordering information Table 1: Housing Style Housing Diameter Style 2.5 (63mm) 3 (80 mm) 4 (100 mm) 6 (160 mm) 10 (250 mm) TNF-0D... TNF-0E... TNF-0F... TNF-0G... TNF-0I... TNF-1D... TNF-1E... TNF-1F... TNF-1G... TNF-1I... T2 TNF-2D... TNF-2E... TNF-2F... TNF-2G... TNF-2I... TNF-5D... TNF-5E... TNF-5F... TNF-5G... TNF-5I... TNF-6D... TNF-6E... TNF-6F... (*) TNF-6G... (*) TNF-8D... TNF-8E... TNF-8F... TNF-8G... TNF-8I... * For 100 mm and 160 mm housings, this style available only in aluminum.
4 TNF Capillary Thermometer Ordering information Table 2: Housing Material 1... = Black Painted Steel (for 3 and 10 housings only) A... = Aluminum (for 4 and 6 housing only) 2... = Stainless Steel Table 3: Measuring Ranges = -40 to +100 F = -20 to +85 F = 32 to 140 F = 32 to 210 F = 32 to 250 F = 32 to 320 F = 32 to 390 F = 32 to 480 F = 32 to 570 F = 32 to 750 F = 32 to 925 F = 32 to 1100 F = -20 to +40 C = -20 to +60 C = -30 to +50 C = -40 to +40 C = -40 to +60 C = 0 to 60 C = 0 to 80 C = 0 to 100 C = 0 to 120 C = 0 to 160 C = 0 to 200 C = 0 to 250 C = 0 to 300 C = 0 to 400 C = 0 to 500 C = 0 to 600 C E... = Special Scale (low end to high end of range must be >140 F)
5 Table 4: Capillaries (Specify capillary length when ordering) Description 316-Ti Stainless Steel Capillary 316-Ti Stainless Steel Capillary with Flexible 304 Stainless Steel Armor Order Code...E...F Table 5: Probe/Fitting Style (Specify probe length L when ordering) Description Thread Order Code T2 Smooth bore probe 12 mm diameter standard (9 or 10 mm optional) none...ao Union nut, for insertion into TSH series thermowell. Allows indicator to rotate 1/2 BSP 3/4 BSP 1 BSP...B1...B2...B3 Union nut and shoulder nipple, allows indicator to rotate when thermowell not used 1/2 NPT 3/4 NPT 1 NPT...1A...1B...1C Bore through compression nut on sensing bulb, allows indicator rotation and adjustment of probe insertion depth 1/2 NPT 3/4 NPT 1 NPT...9A...9B...9C Bore through compression nut on capillary, allows indicator rotation and adjustment of probe insertion depth 1/2 NPT 3/4 NPT 1 NPT...8A...8B...8C Table 6: Options Option Code...D...K...R Description Glycerine (or Paraffin w/switch) Filled Indicator Housing (SS Housings Only) Max. Temperature Pointer (4" & 6" Housings Without Filling or Switches Only) Adjustable Temperature Pointer (4" & 6" Housings Without Filling Only)
6 Table 7: Switches Switching Options Functional Description Contact Type Sliding Magnetic Sliding and Magnetic Contacts with 2 Switches Both contacts closed when temperature above setpoint S11 M11 First contact closed when temperature above setpoint Second contact open when temperature above setpoint S12 M12 First contact open when temperature above setpoint Second contact closed when temperature above setpoint S21 M21 First contact open when temperature above setpoint Second contact open when temperature above setpoint S22 M22 Sliding and Magnetic Contacts with 3 and 4 Switches First contact open when temperature above setpoint Second contact open when temperature above setpoint Third contact closed when temperature above setpoint First contact closed when temperature above setpoint Second contact open when value above setpoint Third contact closed when temperature above setpoint Fourth contact open when temperature above setpoint Inductive Contacts with 2 Switches S221 S1212 M221 M1212 Both contacts conducting when temperature above setpoint I11 First contact conducting when temperature above setpoint Second contact non-conducting when temperature above setpoint I12 First contact non-conducting when temperature above setpoint Second contact conducting when temperature above setpoint I21 Both contacts non-conducting when temperature above setpoint I22
TNF CAPILLARY THERMOMETERS
TNF CAPILLARY THERMOMETERS Flow Pressure Level Temperature measurement monitoring control T2 Gas Filled Capillary Thermometer Dial Sizes: 2.5, 3, 4, 6 and 10 All Stainless Steel Construction Ranges: -40
Contact thermometer. Bimetal- or Gas actuated thermometer. Description. Features. Measuring ranges. Options. Applications
Force Pressure Temperature Switch Contact thermometer Bimetal- or Gas actuated thermometer - Inductive contacts - Sliding contacts - Snap action contact - Class 1 acc. to DIN EN 13190 - Optional with liquid
NRF CAPACITANCE LEVEL TRANSMITTER
NRF CAPACITANCE LEVEL TRANSMITTER Flow Pressure Level Temperature measurement monitoring control N2 Rigid and Suspended Designs Compact Microprocessor Based Designs High Accuracy NPT Threaded and Tri-Clamp
Thermometer in stainless steel with capillary for mounting in thermowell or for direct mounting
Ed.17.02 Design Type Case diameter in stainless steel for mounting in thermowell or for direct mounting F73 Dim 100 mm or 160 mm Accuracy Class 1,0% DIN EN 13190 Case Glass Stainless steel with bayonet
TRR. Gas or Vapour Remote Reading Thermometer
TRR Gas or Vapour Remote Reading Thermometer Description & Features: Versatile, heavy duty gas or vapour thermometer for remote reading Many varieties are available from stock; special requests are built
ZDM POSITIVE DISPLACEMENT FLOW METER
ZDM POSITIVE DISPLACEMENT FLOW METER Flow Pressure Level Temperature Measurement Monitoring Control Viscosities up to 100,000 cst Accuracy: ±0.3% of Flow To 6500 PSIG Pressure Can Detect Flow Direction
Large selection of standard versions. Special versions at customer request. Nominal sizes: 100, 125 and 150 mm
Bi-metal Thermometers all Stainless Steel Construction measuring monitoring analysing TBE Fast response times Large selection of standard versions Special versions at customer request Nominal sizes: 100,
Direct Mounted Dial Thermometer
Direct Mounted Dial Thermometer 3 1 /2" Stainless Steel Case & 4 1 /2" Cast Aluminum Case Adjustable Angle 3 1 /2", 4 1 /2" Dial Sizes ± 1 Scale Division Accuracy Stainless Steel or Cast Aluminum Case
Thermometer in stainless steel with adjustable stem in stainless steel. Compression fitting for direct mounting or mounting in separate thermowell
type stainless steel Ed.17.01 Design Thermometer in stainless steel in stainless steel. Compression fitting for direct mounting or mounting in separate thermowell Type Design EN 13190 Case diameter Dim
Thermometer in stainless steel with vertical stem in stainless steel
Ed.18.01 Design Thermometer in stainless steel with in stainless steel 1.4571 Design EN 13190 Case diameter Dim 63, 100 eller 160 mm Accuracy Class 1,0% acc.to DIN EN 13190 Type Case Glass 5500 = case
THERMOMETERS. STANDARD BIMETAL 90 back angle type available in 2, 3 and 5 dials
THERMOMETERS Thermometers are used to measure temperature. PIC stocks a variety of temperature measuring instruments, including bimetals, magnetic thermometers, tridicators and scale thermometers. STANDARD
INDUSTRIAL THERMOMETERS
JJ SIKA thermometers for industry and marine sector JJ Special versions and accessories JJ SIKA thermometers for heating, air conditioning and ventilation (HVAC) INDUSTRIAL THERMOMETERS Contains products
ZDM. Positive Displacement Flowmeter
Positive Displacement Flowmeter measuring monitoring analyzing ZDM Viscosities up to 100,000 cst Accuracy: ±0.3% of Flow Pressure: to 6500 PSIG Can Detect Flow Direction Handles a Variety of Lubricating
MICROSTAT-M. Page 1/7. Data Sheet Type /2160. Type / /
3639 Fulda, Germany Postal address: 3635 Fulda, Germany Phone: +49 661 63- Fax: +49 661 63-67 Harlow - Essex CM2 2DY, UK Data Sheet 6851 Page 1/7 MICROSTAT-M Particularities Electromechanical temperature
Bimetallic Temperature Guage (TG-BM)
Bimetallic Temperature Guage (TG-BM) Precise Measurement of Temperature Guaranteed Introduction The bimetallic thermometer has a quick reacting bi-metal coil. It is manufactured from two cold-welded metal
TEMPERATURE SWITCHES AND THERMOSTATS
TEMPERATURE SWITCHES AND THERMOSTATS Our temperature switches and thermostats are ideal for applications where the end user is looking for highly accurate control across a wide range of operating temperatures.
THERMOWELL ASSEMBLIES & THERMOWELLS INDEX
THERMOWELL ASSEMBLIES & THERMOWELLS INDEX PAGE General Information & Part Numbering Examples... T2 RTD & T/C Style Thermowell Assemblies RTD'S for Thermowells (RT, RV, R4, RW, R1, R2, R5, or R8)... T3
SCC Inc. QAx Series. Technical Instructions. Document No. SEN-1000 December 18, Temperature Sensors. Description. Features.
SCC Inc. QAx Series QAC QAE QAM Temperature Sensors Technical Instructions December 18, 2013 Description Features Application QAx temperature sensors are resistance temperature detectors (RTDs. RTDs work
MGO INSULATED THERMOCOUPLES INDEX
MGO INSULATED THERMOCOUPLES INDEX PAGE General Information... M1 Part Numbering Examples... M4 Thermocouple Elements (MA)... M5 Leadwire Style Thermocouples (MB)... M6 Leadwire Style Thermocouples (MD,
BI-METAL DIAL THERMOMETERS
T +6 (4) 2231 0059 F +6 (4) 2236 0236 Rm. 103-A, No. 67, T +6 (21) 5777 310 F +6 (21) 5777 319 BI-METAL DIAL THERMOMETERS 2. Case Dial 4. Connec on 5. Stem Dial 6. Stem Length 60 70 0 90 R 1 50 40 32 F
MAN-U. Differential Pressure Gauges. for high static pressures up to 200 bar. Housing: 100 mm, 150 mm
Differential Pressure Gauges for high static pressures up to 200 bar measuring monitoring analysing MAN-U Housing: 100 mm, 150 mm Material Housing: stainless steel Connection: stainless steel Movement:
Temperature Measurement Solutions. Dial Indicating Electronic Industrial RTDs Thermowells Accessories
Temperature Measurement Solutions Dial Indicating Electronic Industrial RTDs Thermowells Accessories At NOSHOK, we pride ourselves on being innovators in the industry by continually offering the latest
Rosemount 405 Compact Primary Element
September 2014 Rosemount DP Flow Rosemount 405 Compact Primary Element Rosemount 405 Compact Primary Element utilizes an easy to install direct mount primary element assembly. Available with Conditioning
Sheathed Thermocouple Sensor (120 Series)
Applications 120 series comprise a thin-walled and felxible mineral insulated sheath cable made of stainless steel or inconel. The cable contains thermal wires embed in pressed fireproof manesium oxide.
INDUSTRIAL THERMOMETERS
SIKA thermometers for industrial and marine applications Special versions and accessories SIKA thermometers for HVAC applications INDUSTRIAL THERMOMETERS SIKA-FLOYD_V_thermometer 09/08 The Original - Made
SCC Inc. QAx Series. Technical Instructions. Document No. SEN-1000 March 15, Temperature Sensors. Description. Features.
SCC Inc. QAx Series QAC QAE QAM 544 Temperature Sensors Technical Instructions March 15, 2018 Description Features Application QAx and 544 temperature sensors are resistance temperature detectors (RTDs).
SCC Inc. QAx Series. Technical Instructions. Document No. SEN-1000 July 18, Temperature Sensors. Description. Features.
SCC Inc. QAx Series QAC QAE QAM 544 Temperature Sensors Technical Instructions July 18, 2018 Description Features Application QAx and 544 temperature sensors are resistance temperature detectors (RTDs).
UTECO. Temperature Probes Overview. Temperature Probes for all Industries Level Switches Accessories, Cables & Transmitters
UTECO Temperature Probes Overview Temperature Probes for all Industries Level Switches Accessories, Cables & Transmitters About us UTECO S.A has 45 years experience in designing and manufacturing of a
Glycerine filled Bourdon tube pressure gauges EN 837-1
Application For gaseous and liquid media which are not highly viscous, do not crystallize and do not attack copper alloys. For measurement in areas with high levels of vibration and high, dynamic pressure
Diaphragm seal with threaded connection Threaded design Model
Pressure Diaphragm seal with threaded connection Threaded design Model 990.10 WIKA data sheet DS 99.01 for further approvals see page 6 Applications For aggressive, hot, corrosive, environmentally hazardous
Industrial Thermocouples
Industrial Thermocouples Protection Head Design U Sheath Materials: 304SS, 30SS, 36SS, 32SS, Inconel or Super OMEGACLAD XL U Probe Length 300 mm (2"), 600 mm (24") Custom Lengths Available, Consult Sales
ISO 9001:2008 certified
c ISO 9001:2008 certified 3/14 www.setexproducts.com INTRODUCTION SETE Thermowells serve two primary functions: (1) extend temperature instrument life by protecting sensing elements from harsh process
Resistance Temperature Detectors
PRODUCT REFERENCE GUIDE Probes & Assemblies PRODUCT FEATURES Rugged Construction Accurate and Stable Probes General Purpose, Tip Sensitive, High Temperature and High Vibration Probes and Assemblies 2,
KAL-K & KAL-A COMPACT THERMAL FLOW SENSOR
KAL-K & KAL-A COMPACT THERMAL FLOW SENSOR Flow Pressure Level Temperature measurement monitoring control Revolutionary Microprocessor-Based Drift Stabilization NPT and 3-A Compliant Sanitary Fittings Non-Corrosive
Pro-V Multivariable Flowmeter Model M23 Insertion Vortex
Pro-V Multivariable Flowmeter Model M23 Insertion Vortex Pro-V TM Advantage: Volumetric or mass flow monitoring of most liquids, gases, and steam Multivariable meter delivers mass flow, temperature, pressure,
Thermocouples Straight Design Model TC501, for Flue Gas Measurement
Electrical Temperature Measurement Thermocouples Straight Design Model TC501, for Flue Gas Measurement WIKA Data Sheet TE 65.30 Applications T Blast furnaces, air heaters T Red-heat and heat treatment
Thermowell, weld-in or with flange (solid-machined) Version per DIN form 4, 4F Models TW55-6, TW55-7
Thermowells Thermowell, weld-in or with flange (solid-machined) Version per DIN 43772 form 4, 4F Models TW55-6, TW55-7 WIKA data sheet TW 95.55 Applications Chemical industry, process technology, apparatus
Diaphragm Seal with flush diaphragm and flange acc.to EN or ASME B 16,5 Pressure gauge in stainless steel
Ed.17.01 Design Diaphragm Seal with flush diaphragm and flange acc.to EN 1092-1 or ASME B 16,5 Pressure gauge in stainless steel Type Lower body Flush diaphragm with flange connection acc.to EN 1092-1
Liquid level switch BW 17
KROHNE 09/2001 7.02369.21.00 GR/PRINTO Liquid level switch Status: 10/99 Variable area flowmeters Vortex flowmeters Flow controllers Electromagnetic flowmeters Ultrasonic flowmeters Mass flowmeters Level
Thermocouple for Flue Gas Temperature Measurements,
Electrical Temperature Measurement Thermocouples for Flue Gas Temperature Measurements Model TC81 with Thermowell Model TW81 WIKA Data Sheet TE 65.81 Applications Blast furnaces, air heaters Red-heat and
KDS. All Metal Variable Area Flowmeter. for liquids and gases. Measuring range: l/h l/h water 5-50 Nl/h...
All Metal Variable Area Flowmeter for liquids and gases measuring monitoring analysing : 0.1-1 l/h... 20-200 l/h water 5 - Nl/h... 600-6000 Nl/h Accuracy: ±3 % of full p max : 420 bar; t max : 130 C OConnection:
AccuTru Sensor Technologies
High Temperature ExL Ceramic Sheathed Thermocouples NEW TECHNOLOGIES (exclusively from AccuTru) Mi-Dry, ExL, SVS AccuTru is becoming well known in the process control community as a leading edge sensor
Temperature Regulator Series
Temperature Regulator 91000 Series The Self-Op 91400 pictured Self-Operating esign Indicating, Non-Indicating or Safety Models vailable eavy uty ie Cast luminum ousing 1 /2" thru 6" Valve Sizes The Series
Pro-V Multivariable Flowmeter Model M23 Insertion Vortex
Pro-V Multivariable Flowmeter Model M23 Insertion Vortex Pro-V TM Advantage: Volumetric or mass flow monitoring of most liquids, gases, and steam Multivariable meter delivers mass flow, temperature, pressure,
Diaphragm pressure gauge per EN 837-3,
Diaphragm pressure gauge per EN 837-3, chemical design, NS 100/160,Type series BA2 Features Diaphragm pressure gauge Nominal ranges -400 mbar to -1...24 bar, 0 25 mbar to 0 25 bar High quality case with
View of Arthermo Production Plant and Offices in Gessate (Milano) General Catalogue. Temperature under control
View of Arthermo Production Plant and Offices in Gessate (Milano) General Catalogue 2017/1 Temperature under control The Company Arthermo has been making Measurement Instruments internationally for over
Resistance Temperature Detectors (RTD)
Resistance Temperature Detectors (RTD) Style H Connection Head Assembly Connection Head Option A - Aluminum Tip Style F - Flat Tip Head Fitting Option G - ½ NPT Hex Nipple Head Fitting Option A - Fixed
Bourdon Tube Pressure Gauges
Bourdon Tube Pressure Gauges acc. to N 87 for Industrial Applications measuring monitoring analysing Housing: 6 mm, 8 mm, 1 mm, 16 mm Rectangular asing: 96 x 96 mm, 1 x1 mm Options: mm, mm, mm, mm onnection:
Data Sheet 8008A Pressure Gauge
Data Sheet FEATURES Meets EN837-1 and ASME B40.100 specifications Corrosion resistant stainless steel case Dry gauges are field fillable Flutterguard standard on dry gauges Custom dials available Ventable
AMMONIA REFRIGERATION GAUGES
AMMONIA REFRIGERATION GAUGES For ammonia refrigeration applications, PIC Gauges ammonia gauges measure ammonia refrigerant pressure and corresponding temperature. 401NH3 SERIES AMMONIA-LF SERIES STANDARD
91000 Series Temperature Regulator
TEMPERTRE REGLTORS 91000 Series Temperature Regulator The Self-Op (Self-Operated Temperature Regulator) Indicating ial (Model 91400 only) ctuator istributed By: M&M Control Service, Inc. www.mmcontrol.com/trerice.php
Data Sheet 8008A Commercial Pressure Gauge
FEATURES Meets EN837-1 and ASME B400 specifications Corrosion resistant stainless steel case Dry gauges are field fillable FlutterGuard standard on dry gauges Custom dials available Ventable fill plug
Thermocouple Heads. MOST POPULAR MODELS HIGHLIGHTED! To Order (Specify Model No.) B-9 76 (3) Model Price Material Type Number Each 48 (1 7 8)
Thermocouple Heads Dimensions: mm (in) MOST POPULAR MODELS HIGHLIGHTED! Model Price Material Type Number Each 48 ( 7 8) (3 3 8) 54 (2 8) NB-0 $23 Cast Iron NB NB-2 26 NB-4 28 92 (3 5 8) NB Cast Iron NB4
Thermatel Thermal Dispersion Flow and Level Switches
Thermatel Thermal Dispersion Flow and Level Switches D E S C R I P T I O N Thermatel has demonstrated reliable performance as a flow or level switch. For use as a flow switch, Thermatel can be used to
Thermowell with flange (solid-machined) Model TW10-F, full penetration weld design Models TW10-P and TW10-R, with double fillet weld
Thermowells Thermowell with flange (solid-machined) Model TW10-F, full penetration weld design Models TW10-P and TW10-R, with double fillet weld WIKA data sheet TW 95.10 Applications Petrochemical industry,
QUALITY INDUSTRIAL FLOWMETERS
QUALITY INDUSTRIAL FLOWMETERS COMPANY PROFILE Trimec Industries is an Australian owned ISO9001:2008 quality certified company specializing in the design and manufacture of a proprietary range of positive
91000 Series Temperature Regulator
91000 Series Temperature Regulator The Self-Op (Self-Operated Temperature Regulator) TEMPERTRE REGLTORS Indicating ial (Model 91400 only) ctuator Thermal System: Capillary & Sensing Bulb Self-Operating
All Stainless Steel Bourdon Tube Pressure Gauges
All Stainless Steel Bourdon Tube Pressure Gauges acc. to N 871 for Industrial Applications measuring monitoring analysing Housing: 6 mm, 1 mm, 16 mm (option: 8 mm) onnection: G 1 (6 mm housing) G 1 2 (1,
Weed Instrument Model 602, 612 and 615 Series Platinum RTDs are Spring Loaded Temperature. Weed Instrument
Weed Instrument Temperature, Pressure, and Fiber Optic Technology Models 602, 612 and 615 Nuclear Qualified Spring Loaded RTDs Suitable for a Wide Range of Applications Thermowell Mounted 40 Year Qualified
Diaphragm seal with flange connection With internal diaphragm Model
Diaphragm seals Diaphragm seal with flange connection With internal diaphragm Model 990.26 WIKA data sheet DS 99.26 for further approvals see page 7 Applications Aggressive, highly viscous, crystallising
DIN 3015 CLAMPS B1-1 PN# / / ACC
DIN 0 CLAMPS DIN 0 Clamps HYDAC manufactures a complete line of hose, tube, and pipe mounting components according to the DIN 0 standard. HYDAC clamps assure a simple, reliable dampening support for lines
Mechatronic pressure measurement. Applications. Special features. Description
Mechatronic pressure measurement Diaphragm pressure gauge with switch contacts Model 432.56, high overload safety up to 100 bar Model 432.36, safety version, high overload safety up to 400 bar WIKA data
Section 2 Index PAGE 2-I. Metal Sheath and Ceramic Thermocouple Assemblies. AccuTru Sensor Technologies 2-1. Spring Loaded Hex Nipple w/ Head 2-2
Section 2 Index Model Metal Sheath and Ceramic Thermocouple Assemblies Page I1 GTAW Welded Hex Nipple w/ Head 2-1 I2 Spring Loaded Hex Nipple w/ Head 2-2 I3 Spring Loaded Pipe Nipple w/ Head 2-3 I4 Nipple-Union-Nipple
Pressure & Level Measurement Solutions
Pressure & Level Measurement Solutions Pressure Gauges Dial Indicating Differential Sanitary Digital Pressure & Level Transducers & Transmitters Industrial OEM Hazardous Location Sanitary Pressure Switches
INDUSTRIAL TEMPERATURE SENSORS
Temperature s INDUSTRIAL TEMPERATURE SENSORS Temperature s APPLIED SENSOR TECHNOLOGIES A DIVISION OF UNITED ELECTRIC CONTROLS T E M P S E N S O R - B - 0 2 Temperature s Temperature s index Subject Page
PanaFlow MV82. Insertion Multivariable Flowmeter for Mass, Temperature, and Pressure. GE Sensing. Applications. Key Benefits
Key Benefits Multivariable vortex flowmeter for measuring volumetric flow, temperature, pressure, density, and mass flow using a single meter Advanced design and digital signal processing for vibration
Thermal Solutions Worldwide SECTION C. Industrial Thermocouples and RTDs. Straight Thermocouples Assemblies with Metal Protection Tubes C-5
Thermal Solutions Worldwide SECTION C Industrial Thermocouples and RTDs Straight Base Metal Thermocouple Elements C1 Angle Base Metal Thermocouple Elements C2 Straight Noble Metal Thermocouple Elements
DVH. Multivariable Vortex Flowmeter
Multivariable Vortex Flowmeter measuring monitoring analyzing DVH Measuring Ranges: 0.9...22 to 142...4270 GPM Water 1.8...18 to 2071...203,000 SCFM Air 6.5...52 to 6014...380,148 Lb/Hr Steam Accuracy:
TSK. Flap Flow Meter for Liquids. Range: m 3 /h Accuracy: ± 2.0 of reading p max
Flap Flow Meter for Liquids measuring monitoring analysing TSK Range: 0.5-3.5 200-1500 m 3 /h Accuracy: ± 2.0 of reading p max : PN 40, t max: -40 +300 C Connection: wafer flange DN 25 500 Material: stainless
All Stainless Steel Bourdon Tube Pressure Gauges
All Stainless Steel Bourdon Tube Pressure Gauges acc. to N 871 for Industrial Applications measuring monitoring analysing Housing: 6 mm, 1 mm, 16 mm (option: 8 mm) onnection: G 1 (6 mm housing) G 1 2 (1,
CombiTemp TCR6 Standard RTD temperature sensor
CombiTemp TCR6 Main features Sensor and connection in stainless steel, ISI 316 DIN form B housing Robust design pplications Industrial applications with industrial process connection Pipe systems Heating
Plastic tube flowmeters Series PT/PS Variable area flowmeter for liquids and gases
Plastic tube flowmeters Series PT/PS Variable area flowmeter for liquids and gases Low cost, excellent readability and light weight Simple installation (flanged, threaded or socket ends for solvent or
SPRING LOADED THERMOCOUPLE CONFIGURATIONS
SPRING LOADED THERMOCOUPLE CONFIGURATIONS FOR USE WITH THERMOWELLS II 3G Ex na/nl TCRN/WN/TN S30 S31 S36-1 S36-2 1 FEATURES TECHNICAL SPECIFICATION ASSEMBLY The industrial spring loaded configuration guarantees
RTDs. Offered by. Phone: (203) Fax: (203) Specialists in Valves, Controls, Pneumatics, Fluid Measurement
RTDs Offered by Phone: (203) 261-6711 Fax: (203) 261-8331 www.okcautomation.com Specialists in Valves, Controls, Pneumatics, Fluid Measurement NS RTD s I- Theory of Operation n RTD s basis of operation
2 and 3 T-10 Turbo-Meters Turbine Meters for Accurate Gas Measurement. M-1083 Rev. 4
2 and 3 T-10 Turbo-Meters Turbine Meters for Accurate Gas Measurement M-1083 Rev. 4 GENERAL INFORMATION INTRODUCTION Invensys Energy Metering 2 and 3 T-10 Turbo- Meters were developed to meet the recognized
2 and 3 T-10 Turbo-Meters Turbine Meters for Accurate Gas Measurement. M-1083 Rev. 3
2 and 3 T-10 Turbo-Meters Turbine Meters for Accurate Gas Measurement M-1083 Rev. 3 GENERAL INFORMATION INTRODUCTION Invensys Energy Metering 2 and 3 T-10 Turbo- Meters were developed to meet the recognized
SPRING LOADED THERMOCOUPLE CONFIGURATIONS THERMOWELL & REPLACEABLE INSERT II 2G/D Ex e TCRE/WE
SPRING LOADED THERMOCOUPLE CONFIGURATIONS THERMOWELL & REPLACEABLE INSERT II 2G/D Ex e TCRE/WE C20 C21 C26-2 C26-2 1 FEATURES TECHNICAL SPECIFICATION ASSEMBLY The industrial spring loaded configuration
P100G 5 P117G 6 P117LG 7 W117G 8 W117LG 9 P119G 10 J205G 11 J205LG 12 P605
PRESSURE SWITCHES We manufacture a wide of pressure switches to meet the needs of any industrial application and operating environment. Our preset switches are set at the factory to the specifications
S80 Intelligent Sensors
S80 Intelligent Sensors The ECD Six Point Advantage ELECTRO-CHEMICAL DEVICES What are the S80 Sensors? Intelligent Sensor Design that includes: Digital Communication Stored Calibration Data Temperature
VESSEL & REACTOR VALVES. VR Series RISING DISC PROCESS VALVES. Sold by: G&W Industrial Sales
VR Series VESSEL & REACTOR VALVES RISING DISC PROCESS VALVES CRUST BREAKING BOTTOM OUTLET VALVES Rising Disc Valves M Seal for high Pressure & Temperature. Dual Seal, Soft Seal, M Ring and M Control are
Diaphragm seal with flange connection With internal diaphragm, threaded design Model
Diaphragm seals Diaphragm seal with flange connection With internal diaphragm, threaded design Model 990.12 WIKA data sheet DS 99.31 for further approvals see page 7 Applications Aggressive, contaminated,
TSK S 3. Flap Flowmeter for liquids. Range: m 3 /h. Accuracy: ± 2.0 of reading. : PN 40, t max: C. p max
Flap Flowmeter for liquids measuring monitoring analysing TSK Range: 0.5-3.5 200-1500 m 3 /h Accuracy: ± 2.0 of reading p max : PN 40, t max: -40 +300 C Connection: wafer flange DN 25 500 Material: stainless
TTL-Exd. Thermocouple Thermometers. Ignition Protection Exd. NiCr-Ni or Fe-CuNi thermocouples. Output: sensor or analogue 4-20 ma
Thermocouple Thermometers Ignition Protection Exd measuring monitoring analysing TTL-Exd T2 O O Measuring ranges: max. 1100 C OO NiCr-Ni or Fe-CuNi thermocouples OO Output: sensor or analogue 4-20 ma O
For highest levels of purity
For highest levels of purity Gas purification systems www.airliquide.de Individual gas purification... versatile, quick and clean Proven technology For several decades, Air Liquide has been offering you
Temperature sensors for automotive applications
Temperature sensors for automotive applications When the precise measurement of temperature is a critical aspect to the safety of a process, the importance of precision quality thermocouple material is
Glycerine filled Bourdon tube pressure gauges EN 837-1
Manometer mit Glyzerinfüllung bieten folgende Vorteile: Einsetzbar bei starken Vibrationen und hohen dynamischen Druckbelastungen. Längere Lebensdauer durch geringeren Verschleiß und Korrosionsschutz des
Vortex EX DELTA lowmeter Technical Specifications
Product Data Sheet PDS-VX Vortex EX DELTA lowmeter Technical Specifications DESCRIPTION Rugged, yet simple, the Ex-DELTA vortex flowmeter is suitable for a variety of applications in liquid, gas, air and
SITRANS F flowmeters. SITRANS F VA Tubux variable area meter 4/279. Overview
Overview Design and operation The main components of the Tubux variable area meters are the glass variable-area flow tube with float, the fitting and the connection parts. The flow is displayed directly
P430 Series. Glass Tube Variable Area Flow Meter. Product Features and Options: Contact Information:
P430 Series Glass Tube Variable Area Flow Meter Parker P Series glass tube flowmeters deliver unsurpassed performance and value in a wide variety of gas and liquid applications. P430 Series flow meters
Data Sheet Duragauge Pressure Gauge
Data Sheet 1279 Duragauge Pressure Gauge TM FEATURES Custom dial printing options Micrometer adjustable pointer PLUS Performance option dampens vibration, shock and pulsation effects Pressure range from
Electromagnetic Flange Type BTU METERS. eflow 800H SERIES. Size DN10 to DN1200 DESCRIPTION APPLICATION FEATURES
DESCRIPTION eflow 800H series is flange type Electromagnetic Heat or BTU meter that can be used for measuring energy consumption in heating or cooling application for HVAC and other energy measurement
Standard Bourdon tube pressure gauges EN 837-1
Standard Bourdon tube pressure gauges EN 837-1 Application For gaseous and liquid media which are not highly viscous, do not crystallize and do not attack copper alloys.! When measuring gas or vapour,
Total Suspended Solids Systems
Total Suspended Solids Systems Model 711 Portable MLSS/ILA System Applications Model 711 Remote monitoring Environmental / Conservation Aeration basin monitoring Education / Classroom studies Clarifier
VESSEL & REACTOR VALVES. VD Series DISC VALVES PROCESS VALVES
VD Series VESSEL & REACTOR VALVES DISC VALVES PROCESS VALVES FULL FLOW BOTTOM OUTLET VALVES Tank Bottom Disc Valve M Ring for high temperature & vacuum. Other sealing systems are available Code: VD4R-VD6R
VLM10 In-line Vortex Mass Flow Meter
VLM10 In-line Vortex Mass Flow Meter Description The VLM10 in-line vortex flowmeter measures process fluid flow by detecting the frequency at which vortices are shed from an obstruction in the process
2/2 % ) Direct Acting Subminiature Solenoid Valves. 1/8" and 1/4" NPT. Features. Construction. Electrical
ANSI Accredited Program PRODUCT CERTIFICATION 4 Direct Acting Subminiature Solenoid Valves /8" and /4" NPT / 856 -WAY Features -way normally closed operation Compact design Brass and 6 stainless steel
P600 Pressure Regulator
P00 Pressure Regulator The BelGAS P00 series is a direct operated, pressure reducing regulator that can be used as a pressure loaded regulator, switching valve, or monitoring regulator. Available with
FN04. Liquid level sensor with continuous detection. Level Measurement and Monitoring
Level Measurement and Monitoring FN04 Liquid level sensor with continuous detection Level measurement unaffected by foam formation, conductivity, pressure or temperature Remote indication over very long
TEL-TRU MANUFACTURING COMPANY BIMETAL THERMOMETERS. Since. World-Class Thermometers.
TEL-TRU MANUFACTURING COMPANY BIMETAL THERMOMETERS World-Class Thermometers Since 1916 www.teltru.com Tel-Tru Manufacturing Company World-Class Thermometers We manufacture thermometers - but we sell service,
Diffused Aeration Piping Equipment
1.0 General 1.1. The specifications in this section include all components of the Diffused Aeration System with the exception of the individual diffuser units. Refer to additional specification sections