A SARNET Benchmark on two VULCANO Molten Core Concrete Interaction Tests
|
|
- Bethany Norman
- 6 years ago
- Views:
Transcription
1 A SARNET Benchmark on two VULCANO Molten Core Concrete Interaction Tests C. JOURNEAU 1, J.F HAQUET 1, B. LETEXIER 1, A. GRECO 1, B. SPINDLER 2, R. GENCHEVA 3, P. GROUDEV 3, D. DIMOV 4, A. FARGETTE 5, J. FOIT 6, B. MICHEL 7, C. MUN 7, T. SEVON 8, C. SPENGLER 9, F. POLIDORO 10 1 CEA, Cadarache (FR) 4 Energy Inst., Sofia (BG) 7 IRSN, Cadarache (FR) 10 RSE, Milan (IT) 2 CEA, Grenoble (FR) 5 AREVA NP, Erlangen (DE) 8 VTT, Espoo (FI) 3 INRNE, Sofia (BG) 6 KIT, Karlsruhe (DE) 9 GRS, Cologne (DE) ABSTRACT A Molten Core-Concrete Interaction experimental program is underway at the VULCANO facility. It is devoted to the study of 2D long-term dry MCCI with either purely oxidic prototypic corium or with oxide and metal layers. It has been decided to open the results of two oxidic tests VB-U5 (silica-rich concrete) and VB-U6 (limestone-rich concrete) to the SARNET WP6 as a part of the Joint Program of Activities on this topic in the European Severe Accident Research Network of Excellence. In this scope this benchmark was performed. Ten participants from different countries (CEA Cadarache France, CEA Grenoble France, IRSN France, GRS Germany, KIT Germany, VTT Finland, AREVA Germany, EI Bulgaria, INRNE Bulgaria, RSE Italy) took part in this work. Five computer codes were used to perform two independent calculations, each one representing the main phenomena arising during the interaction between prototypic oxidic corium and siliceous or limestone concretes. The purpose of these analyses is to compare code results with those obtained by the experiments and to compare the best-estimate assumptions in the models used in the available MCCI codes. Conclusions on the major uncertainties on models used in these codes can then be drawn. Major differences lie with the estimation of the radiative losses (which control the power remaining available for ablation), the pool temperature evolution and the pool composition. Also some types of modelling rely on explicit assumptions on ablation anisotropy while for others it is only a consequence of the chosen set of correlations. 1 INTRODUCTION A Molten Core-Concrete Interaction (MCCI) experimental program is underway at the VULCANO facility [1]. It is devoted to the study of 2D long-term dry MCCI with either purely oxidic prototypic corium or with oxide and metal layers. It has been decided to use the results of two oxidic tests VB-U5 (silica-rich concrete) and VB-U6 (limestone-rich concrete) for a benchmark on MCCI codes as a part of the Joint Program of Activities on this topic in the European Severe Accident Research Network of Excellence (SARNET). Ten participants from different European countries (CEA Cadarache France, CEA Grenoble France, IRSN France, GRS Germany, KIT Germany, VTT Finland, AREVA Germany, EI Bulgaria, INRNE Bulgaria, RSE Italy) took part in this work. Five computer codes were used to perform two independent calculations, each one representing the main phenomena arising during the interaction between prototypic oxidic corium and siliceous or limestone concretes. The purpose of these analyses is to compare code results with those obtained by the experiments and to compare the best-estimate assumptions in the models used in the available MCCI codes. 1/8 pages
2 In a first section, the tests are described. Then, in a subsequent section, the calculations results will be presented and discussed. A synthesis will then conclude this paper. 2 TEST DESCRIPTION The concrete test sections (Figure 1) are 600 x 300 x 400 mm concrete blocks with a 300 x 250 mm hemicylindrical cavity in which corium is poured [2]. Two types of concretes, representative of nuclear reactor basemats, have been used. They were both made with CEM I 52.5 N cement (from Holcim) and the aggregate granulometry was the same for the two concretes. But, the nature of the aggregates were different: in the first one (Concrete F), the aggregates were mostly siliceous (they came from the Rhine river GSM Rumersheim gravel pit), while, for the second one (Concrete G), the sand and the gravel were a mixture of limestone-siliceous and limestone aggregates from the Durance Granulats Peyrolles ballast pit and the La Nerthe Quarry (Jean Lefebvre Méditérannée), leading to a higher fraction of limestone (Table I). More than 100 K-type thermocouples (Figure 1 left) have been installed in the concrete to monitor its ablation as well as some high temperature C-type thermocouples. Refractory ceramic wall In-corium TCs Concrete to be studied Figure 1: The concrete crucible Left: before corium pouring Right: before concrete pouring TABLE I: Overall chemical composition of the concretes used in VULCANO MCCI experiments (wt.%) Concrete F Concrete G SiO CaO Al 2 O CO H 2 O 3 3 2/8 pages
3 Four parallel induction coils surround the section and provide sustained heating. The test sections are installed in the VULCANO containment and operate in air at atmospheric pressure. During the experiments a high-temperature oxidic corium melt has been obtained with the VULCANO plasma-arc furnace and poured in concrete test sections. Table IV summarizes their main characteristics. Pseudobinary phase diagrams between VB-U5 and VB-U6 have been computed (Figure 2) by GEMINI2 correlations from NUCLEA08 database. They show the different physicochemical behaviour of the two studied concretes. TABLE II: Characteristic of the oxidic corium experiments Corium composition (wt.%) Test VB-U5 VB-U6 initial 54% UO 2, 37.5 % ZrO 2, 3.7 % SiO 2, 2.5% Fe 2 O 3, 2.4% CaO 57 % UO 2, 33 % ZrO 2, 5 % SiO 2, 2.6 % CaO, 2.3% Fe 2 O 3 Corium mass 28 kg 31 kg Concrete Concrete F Silica Concrete G Limestone Initial Temperature ~2400 K ~2400 K Test Duration 2 hr 30 2 hr Injected power 25 kw (first 1h20) 27 kw Nett power 11.5 ± 1 kw 9 ± 1 kw Figure 2: Pseudo binary diagrams between concrete and corium Left: VB-U5 Right: VB-U6 black: Liquidus line red: solidus line 3/8 pages
4 3 COMPARATIVE ANALYSIS OF CALCULATIONS Different codes like TOLBIAC-ICB v3.2 [3], [4], ASTECv2/MEDICIS [5], COSACO [6], CORQUENCH 3.03 [7], WECHSL [8] and CORIUM-2D [9] have been used to compute the main phenomena during the interaction between real concrete material (siliceous-rich and limestone-rich concretes) and molten prototypical corium in VB-U5 and VB-U6 tests. Many research organizations as CEA-Cadarache, CEA-Grenoble, GRS, IRSN, VTT, AREVA, EI, KIT, INRNE and RSE have been involved to recalculate and explain pool/concrete interface behaviour. Some of the participants, like CEA-Cadarache and CEA-Grenoble have made more than one calculation per test to compare different assumptions available in code modelling. The main purpose of this benchmark is to compare code results with the experimental results, to compare the best-estimated assumptions and to define major uncertainties in the models used in these codes. The other purpose is to point out the key points in the physical phenomena that will allow future improvement of the available MCCI codes. An example of the obtained final cavity shapes in case of the VB-U5 test is displayed on next Figure 3. Clearly codes imposing the anisotropy (by fitting a multiplicative factor applied to the convective heat transfer coefficients or imposing values of thermal resistances at pool/concrete interfaces) or using heat transfer models leading intrinsically to anisotropy permit to get a better agreement for the final cavity shape. Crucible shapes at the end of calculations of VB-U5 test H (cm) R (cm) VTT GRS AREVA IRSN EI INRNE CEA_gre_base CEA_gre_case2 CEA_gre_case3 KIT CEA_cad_2336K CEA_cad_2625K RSE EXPERIMENT INITIAL Figure 3: Crucible shapes at the end of calculation for VB-U5 Pool temperatures calculated for VB-U5 are shown in Figure 4 below. Most curves indicate a trend of monotonous decrease. In most of calculations the pool temperature decreases faster during the first transient phase and this decrease slows down at later times, only exceptions are TOLBIAC (CEA) and CORIUM-2D (RSE) calculations with the highest pool/crust interface temperature. It must be noted that pool temperature has been 4/8 pages
5 measured only during a small period around 1200 s. TOLBIAC calculations which follow the liquidus temperatures (Figure 2) give fairly good estimates of the pool temperature. Temperature (K) Pool temperatures versus time for VB-U5 test Time (s) GRS VTT AREVA IRSN EI INRNE CEA_gre_base CEA_gre_case2 CEA_gre_case3 KIT CEA_cad_2625K CEA_cad_2336K RSE EXPERIMENT Figure 4: Pool temperatures versus time for VB-U5 Mass fraction (%) 45% 40% 35% 30% 25% 20% 15% 10% 5% 0% UO2 final mass fractions for VB-U5 VTT; 39,35% GRS; 37,29% CEA_gre_ base case; 3,52% CEA_gre_ case2; 14,71% CEA_gre_ case3; 5,81% IRSN; 39,39% AREVA; 35,65% EI; 36,96% CEA_cad_ 2625K; 10,70% INRNE; 39,03% CEA_cad_ 2336K; 9,32% KIT; 35,55% Exp. values Figure 5: UO2 final mass fractions for VB-U5 (Experimental range 34-53%) The computed final composition has been compared from the Post Test Analyses results. Figure 5 presents for instance the final UO 2 fraction. Most of the calculations consider a mixing of all the corium with all the ablated concrete and provide final values between 35 and 40 %. On the opposite, TOLBIAC-ICB considers that crust remain at the same composition from the time they have been formed (i.e. a time where there was less concrete in the pool) and in some case even consider that the crust correspond to the most refractory species [3] (i.e. mainly (U,Zr)O 2 ). Therefore the melt is depleted in UO 2 and 5/8 pages
6 results between 3.5 and 15% have been computed. Experimentally, corium-rich zones (with up to 53 wt% UO 2 ) and corium-poor zones (down to 35 wt% UO 2 ) have been observed. Most of the calculations fit between these two values and are thus deemed acceptable. It is thus suggested that if there are crusts, they must be frequently renewed so that their composition does not vary significantly to that of the rest of the pool. Concerning the VB-U6 experiment with limestone rich concrete, similar fits have been observed. For instance, Figure 6 presents the experimental and computed cavity shapes. Crucible shapes at the end of calculations of VB-U6 test H (cm) VTT GRS AREVA CEA_gre_base CEA_gre_case2 CEA_gre_case3 IRSN INRNE CEA_cad_9kW CEA_cad_9kW-Pcond KIT EI R (cm) RSE EXPERIMENT INITIAL Figure 6: Final cavity shape for VB-U6: Experimental and calculated profiles. Void fraction % 50% 45% 40% 35% 30% 25% 20% 15% Void fractions for VB-U6 test GRS VTT CEA_gre_base CEA_gre_casa2 CEA_gre_case3 AREVA IRSN INRNE 10% CEA_cad_9kw 5% CEA_cad_9kW-Pcond 0% Time (s) KIT Figure 7: Estimated void fractions in VB-U6 6/8 pages
7 Figure 7 presents the computed void fractions in VB-U6. In the initial stage of calculation the greater values are calculated by GRS, IRSN, INRNE and AREVA (around 30%) whereas TOLBIAC (CEA) gives lower values around 10%. One of the causes of discrepancy may resides by the different assumptions made to adapt the superficial gas velocity - void fraction drift correlations to a 2D gas injection geometry. TOLBIAC averages the gas flow rate over the concrete area, whereas the other codes consider the gas flow rate through the pool horizontal section. After one hour, even for this test with a 66 % CaCO 3 concrete, all calculations lead to void fractions below 7 %. Post Test Analyses indicate a higher porosity at the end of the test, around 15 %. 4 CONCLUSIONS From this benchmark exercise, it must be noted that there are many similarities in the predicted trends, in the ranges accounted. Nevertheless some major differences between modelling approaches can be observed. The ablated volume is controlled by the ablative energy, thus by the amount of energy radiated through the upper surface which depends on the code heat transfer models (heat convection distribution and interface structure) and also on the upper crust interface temperature; moreover most codes overestimate the ablated concrete volume if significant conduction heat losses through the concrete are not taken into account especially in case of VB-U6 (It has been estimated to account for 1 to 2.5 KW on a net injected power of 9 kw, depending on the modelling hypotheses). Cavity shape are rather well predicted: the VB-U5 with siliceous concrete required taking into account anisotropy, either explicitly (with MEDICIS, TOLBIAC) or implicitly (with CORQUENCH and WECHSL); axial ablation is generally overestimated. Assuming an interface temperature around or slightly below liquidus, it provides good estimates of the pool temperature, whereas the other models give large discrepancies of several hundreds kelvins at least in the initial MCCI phase of the VBU5 experiment; however, the calculated temperatures cannot be compared with the experimental in the longer term since the overall pool temperature evolution was not measured. This has been corrected in subsequent tests [11]. All codes predict a small void fraction (even with limestone test U6; the reasons are probably that the modelling of drift flux with 2D gas injection which is not well supported by analytical experiments, even if different approaches are used in codes to adapt 1D experimental data to a 2D configuration with gas sparging from two perpendicular interfaces.) Crusts, if they exist, shall have a composition close to the current pool composition. Up to now, it is still not possible to propose a comprehensive modelling of MCCI that could predict the observed anisotropy and all the parameters of the experiment. But it must be reminded that we are using multi 0D quasi-steady state modelling to model an intermittent ablation process with a complex geometry both at the interface and a complex convection pattern in the pool because of combined effects of gas bubbling and solutal convection. Considering this benchmark exercise, it must be stressed that VB-U5 and VB-U6 were among the first successful VULCANO MCCI experiments. They used typical Gen 2 plant concretes and prototypical corium. Recent tests (VBES-U2 [11] e.g.) would have better measurements (better estimation of radiated and ablated powers, valid measurements of 7/8 pages
8 temperature every ~10 min). So a new benchmark with this experiment or a new test represents a significant opportunity to enrich our MCCI scientific knowledge. Indeed the general ablation pattern can be rather well predicted by most codes but no single calculation has been able to compute all the parameters of the experiments, i.e. mainly 2D ablation, evolutions of bulk pool temperature and upper pool interface temperature. REFERENCES [1] C. Journeau, P. Piluso, J.F. Haquet, E. Boccaccio, V. Saldo, J.M. Bonnet, S. Malaval, L. Carénini, L. Brissonneau, Two dimensional interactions of corium with concretes: The VULCANO VB Test series, Ann. Nucl. Ener. 36, pp (2009). [2] C. Journeau, J.M. Bonnet, E. Boccaccio, P. Piluso, J. Monerris, M. Breton, G. Fritz, T. Sevón, P. H. Pankakoski, S. Holmström, J. Virta, European Experiments on 2D Corium-Concrete Interaction: HECLA and VULCANO, Nuclear Technology, 170, (2010). [3] B. Spindler, B. Tourniaire, J.M.Seiler, MCCI Analysis and Application with the TOLBIAC-ICB Code based on Phase Segregation Model, ICAPP 05, Seoul Korea, May [4] B.Spindler, E. Dufour, TOLBIAC-ICB V3.2: Code description, Note technique DEN/GRE/DTN/SE2T/LITA/NT, /0. [5] F. Duval, M. Cranga, ASTEC V2 MEDICIS MCCI module Theoretical Manual, DPAM/SEMIC [6] G. Lohnert, R. Gadow, Temporary Melt Retention in the Reactor Pit of the European Pressurized Water Reactor (EPR), IKE [7] M. T. Farmer, The CORQUENCH Code for Modeling of Ex-Vessel Corium Coolability under Top Flooding Conditions Code Manual Version3.03, OECD/MCCI-2010-TR03. [8] J. J. Foit, M. Reimann, B. Adroguer, G. Cenerino, S. Stiefel, The WECHSL-Mod3 Code: a computer program for the interaction of a core melt with concrete including the long term behavior; Model descriptions and User s manual,. FZKA 5416 (1995). [9] F. Parozzi, R. Fontana, CORIUM-2D Advanced Code, Enel Struttura Ricerca, PAM , June [10] M. Cranga, C. Mun, B. Michel, F. Duval, M. Barrachin, Interpretation of real material 2D MCCI experiments in homogeneous oxidic pool with the ASTEC/MEDICIS code, Proceedings of ICAPP08, Anaheim, California, June 8-12th [11] C. Journeau, L. Ferry, P. Piluso, J. Monerris, M. Breton, G. Fritz, T. Sevon, «Two EU-funded tests in VULCANO to assess the effects of concrete nature on its ablation by molten corium, ERMSAR 2010, Bologna, Italy, May /8 pages
A SARNET Benchmark on two VULCANO Molten Core Concrete Interaction Tests
A SARNET Benchmark on two VULCANO Molten Core Concrete Interaction Tests C. JOURNEAU 1, J.F HAQUET 1, B. LETEXIER 1, A. GRECO 1, B. SPINDLER 2, R. GENCHEVA 3, P. GROUDEV 3, D. DIMOV 4, A. FARGETTE 5, J.
More informationA SARNET Benchmark on two VULCANO Molten Core Concrete Interaction Tests
A SARNET Benchmark on two VULCANO Molten Core Concrete Interaction Tests C. Journeau 1, J.F Haquet 1, B. Letexier 1, A. Greco 1, B. Spindler 2, R. Gencheva 3, P. Groudev 3, D. Dimov 4, A. Fargette 5, J.
More informationA short introduction to SARNET Joint Programme of Activities on Molten Core Concrete Interaction (MCCI)
A short introduction to SARNET Joint Programme of Activities on Molten Core Concrete Interaction (MCCI) Co-ordinated by Christophe Journeau Commissariat à l énergie atomique et aux énergies alternatives
More information5.3. Phenomena that could lead to delayed containment failure: Molten Core-Concrete Interaction (MCCI)
200 Nuclear Power Reactor Core Melt Accidents 5.3. Phenomena that could lead to delayed containment failure: Molten Core-Concrete Interaction (MCCI) 5.3.1. Introduction In the event of reactor-vessel failure
More informationMCCI in an oxide/metal pool: lessons learnt from VULCANO, Greene, ABI and BALISE experiments and remaining uncertainties
MCCI in an oxide/metal pool: lessons learnt from VULCANO, Greene, ABI and BALISE experiments and remaining uncertainties M. CRANGA 1, L. FERRY 2, J.F. HAQUET 2, C. JOURNEAU 2, B. MICHEL 1, C. MUN 1, P.
More informationMCCI on LCS concrete with and without rebars
1/10 MCCI on LCS concrete with and without rebars J. J. Foit Karlsruhe Institute of Technology, Karlsruhe (DE) Summary Even though extensive research has been undertaken over several years in the area
More informationExperiments on MCCI with oxide and steel
Experiments on MCCI with oxide and steel J. J. FOIT 1, M. FISCHER 2, CH. JOURNEAU 3, G. LANGROCK 2 1 KIT, Karlsruhe (DE) 2 AREVA, Erlangen (DE) 3 CEA Cadarache (FR) ABSTRACT The large-scale MOCKA (KIT,
More informationExperiments of the LACOMECO Project at KIT
Experiments of the LACOMECO Project at KIT A. MIASSOEDOV 1, M. KUZNETSOV 1, M. STEINBRÜCK 1, S. KUDRIAKOV 2 Z. HÓZER 3, I. KLJENAK 4, R. MEIGNEN 5, J.M. SEILER 6, A. TEODORCZYK 7 1 KIT, Karlsruhe (DE)
More informationMCCI on LCS concrete with and without rebars
MCCI on LCS concrete with and without rebars J. J. FOIT KIT, Germany KIT University of the State of Baden-Württemberg and National Large-scale Research Center of the Helmholtz Association www.kit.edu MOCKA
More informationESTIMATION OF ABLATION DEPTH IN CONCRETE SLAB UNDER REACTOR DURING NUCLEAR ACCIDENT
ESTIMATION OF ABLATION DEPTH IN CONCRETE SLAB UNDER REACTOR DURING NUCLEAR ACCIDENT M. Vaitová, P. Štemberk Abstract: The molten reactor core-concrete interaction, which describes the effect of molten
More informationNURETH Progress on Severe Accident Code Benchmarking in the Current OECD TMI-2 Exercise
NURETH-15 544 Progress on Severe Accident Code Benchmarking in the Current OECD TMI-2 Exercise G. Bandini (ENEA), S. Weber, H. Austregesilo (GRS), P. Drai (IRSN), M. Buck (IKE), M. Barnak, P. Matejovic
More informationUnderstanding the effects of reflooding in a reactor core beyond LOCA conditions
Understanding the effects of reflooding in a reactor core beyond LOCA conditions F. Fichot 1, O. Coindreau 1, G. Repetto 1, M. Steinbrück 2, W. Hering 2, M. Buck 3, M. Bürger 3 1 - IRSN, Cadarache (FR)
More informationSIMULATION OF LIVE-L4 WITH ATHLET-CD
SIMULATION OF LIVE-L4 WITH ATHLET-CD T. Hollands, C. Bals Gesellschaft für Anlagen- und Reaktorsicherheit (GRS) ggmbh Forschungszentrum, Boltzmannstraße 14, 85748 Garching, Germany thorsten.hollands@grs.de;
More informationControlled management of a severe accident
July 2015 Considerations concerning the strategy of corium retention in the reactor vessel Foreword Third-generation nuclear reactors are characterised by consideration during design of core meltdown accidents.
More informationSevere Accidents. Béatrice Teisseire et al. CEA post-fukushima R&D programmes on PWR. Christophe Journeau,
International Experts Meeting on Strengthening Research and Development Effectiveness in the Light of the Accident at the Fukushima Daiichi Nuclear Power Plant IAEA, Vienna 16 20 February 2015 CEA post-fukushima
More informationAnalysis of WO 3 /ZrO 2 vs. UO 2 /ZrO 2 Fuel-Coolant Interaction in KROTOS Conditions
Analysis of WO 3 /ZrO 2 vs. UO 2 /ZrO 2 Fuel-Coolant Interaction in KROTOS Conditions ABSTRACT Vasilij Centrih, Matjaž Leskovar Jožef Stefan Institute Jamova cesta 39 1 Ljubljana, Slovenia vasilij.centrih@gmail.com,
More informationZRO 2 AND UO 2 DISSOLUTION BY MOLTEN ZIRCALLOY
International Conference Nuclear Energy for New Europe 2002 Kranjska Gora, Slovenia, September 9-12, 2002 www.drustvo-js.si/gora2002 ZRO 2 AND UO 2 DISSOLUTION BY MOLTEN ZIRCALLOY J. Stuckert, A. Miassoedov,
More informationEx-vessel corium spreading: results from the VULCANO spreading tests
Nuclear Engineering and Design 223 (2003) 75 102 Ex-vessel corium spreading: results from the VULCANO spreading tests Christophe Journeau, Eric Boccaccio, Claude Brayer, Gérard Cognet 1, Jean-François
More information5.4. Retention and cooling of corium inside and outside the reactor vessel
222 Nuclear Power Reactor Core Melt Accidents 5.4. Retention and cooling of corium inside and outside the reactor vessel 5.4.1. In-vessel corium retention 5.4.1.1. Physical phenomena and associated safety
More informationOverview of the ASTEC V2.0-rev1 validation
Overview of the ASTEC V2.0-rev1 validation P. Chatelard (IRSN), S. Arndt (GRS), B. Atanasova (INRNE) G. Bandini (ENEA), A. Bleyer (IRSN), T. Brähler (RUB) M. Buck (IKE), I. Kljenak (JSI), B. Kujal (UJV)
More informationImprovement of Fuel-Coolant Interaction Models for Ex-Vessel Debris Coolability Evaluation
IAEA Tec Mtg Technical Meeting on Phenomenology and Technologies Relevant to In-Vessel Melt Retention and Ex-Vessel Corium Cooling @SNERDI(SHANGHAI) Improvement of Fuel-Coolant Interaction Models for Ex-Vessel
More informationNuclear Safety. Lecture 3. Beyond Design Basis Accidents Severe Accidents
Nuclear safety Lecture 3. Beyond Design Basis Accidents Severe Accidents Ildikó Boros Prof. Dr. Attila Aszódi Budapest University of Technology and Economics Institute of Nuclear Techniques (BME NTI) 1
More informationIRSN views and perspectives on in-vessel melt retention strategy for severe accident mitigation
Florian Fichot Jean-Michel Bonnet Bernard Chaumont IRSN PSN-RES/SAG IRSN views and perspectives on in-vessel melt retention strategy for severe accident mitigation Outline 1. Key points for the feasibility
More informationMitja Uršič, Matjaž Leskovar, Renaud Meignen, Stephane Picchi, Julie-Anne Zambaux. Fuel coolant interaction modelling in sodium cooled fast reactors
Mitja Uršič, Matjaž Leskovar, Renaud Meignen, Stephane Picchi, Julie-Anne Zambaux Fuel coolant interaction modelling in sodium cooled fast reactors Outline Introduction Premixing phase Explosion phase
More informationResearch on Containment Phenomena within Severe Accidents Research Network - Highlights
Research on Containment Phenomena within Severe Accidents Research Network - Highlights Ivo KLJENAK Jozef Stefan Institute, Slovenia Ahmed BENTAIB, Jeanne MALET, Renaud MEIGNEN Institut de Radioprotection
More informationÚJV Řež, a. s. Research Needs for. Improvement of Severe. Accident Management. Strategies at Czech NPPs. Jiří Duspiva
ÚJV Řež, a. s. Research Needs for Improvement of Severe Accident Management Strategies at Czech NPPs Jiří Duspiva International Experts Meeting on Strengthening Research and Development Effectiveness in
More informationSAFETY ENHANCEMENT TECHNOLOGY DEVELOPMENT WITH COLLABORATIVE INTERNATIONAL ACTIVITY
SAFETY ENHANCEMENT TECHNOLOGY DEVELOPMENT WITH COLLABORATIVE INTERNATIONAL ACTIVITY KENJI ARAI Toshiba Corporation Yokohama, Japan Email: kenji2.arai@toshiba.co.jp FUMIHIKO ISHIBASHI Toshiba Corporation
More informationFinal Progress Report PLINIUS FP6. Transnational Access implemented as
Final Progress Report PLINIUS FP6 to the Prototypic Corium Platform PLINIUS implemented as Specific Support Action Contract number: FP6-036403 Project coordinator: Christophe JOURNEAU Project website:
More informationCorium Retention Strategy on VVER under Severe Accident Conditions
NATIONAL RESEARCH CENTRE «KURCHATOV INSTITUTE» Corium Retention Strategy on VVER under Severe Accident Conditions Yu. Zvonarev, I. Melnikov National Research Center «Kurchatov Institute», Russia, Moscow
More informationH2020 and related JRC activities in the field of Nuclear Safety for Light Water Reactors
Joint Research Centre (JRC) Serving society, stimulating innovation, supporting legislation H2020 and related JRC activities in the field of Nuclear Safety for Light Water Reactors Ghislain Pascal Joint
More informationRecent severe accident research Synthesis of the major outcomes from the SARNET network
Recent severe accident research Synthesis of the major outcomes from the SARNET network J.-P. Van Dorsselaere 1, A. Auvinen 2, D. Beraha 3, P. Chatelard 1, L.E. Herranz 4, C. Journeau 5, W. Klein-Hessling
More informationDETAILED ANALYSIS OF GEOMETRY EFFECT ON TWO PHASE NATURAL CIRCULATION FLOW UNDER IVR-ERVC
DETAILED ANALYSIS OF GEOMETRY EFFECT ON TWO PHASE NATURAL CIRCULATION FLOW UNDER IVR-ERVC R. J. Park 1, K. S. Ha 1, and H. Y. Kim 1 Korea Atomic Energy Research Institute 989-111 Daedeok-daero,Yuseong-Gu,
More informationState of the Art and Challenges in Level-2 Probabilistic Safety Assessment for New and Channel Type Reactors in India Abstract
State of the Art and Challenges in Level-2 Probabilistic Safety Assessment for New and Channel Type Reactors in India R.S. Rao, Avinash J Gaikwad, S. P. Lakshmanan Nuclear Safety Analysis Division, Atomic
More informationContinued efforts to improve the robustness of the French Gen II PWRs with respect to the risks of severe accidents.
E. RAIMOND, J.M. BONNET, G. CENERINO, F. PICHEREAU. F. DUBREUIL, J.P VAN-DORSSELAERE IRSN Continued efforts to improve the robustness of the French Gen II PWRs with respect to the risks of severe accidents.
More informationFUNDAMENTAL SAFETY OVERVIEW VOLUME 2: DESIGN AND SAFETY CHAPTER S: RISK REDUCTION CATEGORIES
PAGE : 1 / 29 2.4. ASSESSMENT OF CORIUM STABILISATION 2.4.1. Principal strategy To stabilize the molten core in a severe accident, the EPR relies on an ex-vessel strategy based on the provision of a dedicated
More informationNUMERICAL STUDY OF IN-VESSEL CORIUM RETENTION IN BWR REACTOR
NUMERICAL STUDY OF IN-VESSEL CORIUM RETENTION IN BWR REACTOR M. VALINČIUS Lithuanian Energy Institute Kaunas, Lithuania Email: mindaugas.valincius@lei.lt A. KALIATKA Lithuanian Energy Institute Kaunas,
More informationE. Keim (AREVA NP GmbH) - J.-P. Van Dorsselaere (IRSN) NUGENIA R&D ON SAFETY ISSUES PERSPECTIVES IN THE DOMAINS OF AGEING AND OF SEVERE ACCIDENTS
E. Keim (AREVA NP GmbH) - J.-P. Van Dorsselaere (IRSN) NUGENIA R&D ON SAFETY ISSUES PERSPECTIVES IN THE DOMAINS OF AGEING AND OF SEVERE ACCIDENTS Contents SNETP and NUGENIA Focus on NULIFE outcomes on
More informationFundamental Research Program for Removal of Fuel Debris
International Symposium on the Decommissioning of TEPCO s Fukushima Daiichi Nuclear Power Plant Unit 1-4 1 Fundamental Research Program for Removal of Fuel Debris March 14, 2012 Tadahiro Washiya Japan
More informationThe interactions of molten core with different types of concretes in EPR severe accident
Journal of Sustainable Cement-Based Materials ISSN: 2165-0373 (Print) 2165-0381 (Online) Journal homepage: http://www.tandfonline.com/loi/tscm20 The interactions of molten core with different types of
More informationSimulations of Ex-vessel Fuel Coolant Interactions in a Nordic BWR using MC3D Code
NKS-289 ISBN 978-87-7893-364-5 Simulations of Ex-vessel Fuel Coolant Interactions in a Nordic BWR using MC3D Code Sachin Thakre, Weimin Ma Royal Institute of Technology, KTH, Sweden August 2013 Abstract
More informationOVERVIEW OF LWR SEVERE ACCIDENT RESEARCH ACTIVITIES AT THE KARLSRUHE INSTITUTE OF TECHNOLOGY
OVERVIEW OF LWR SEVERE ACCIDENT RESEARCH ACTIVITIES AT THE KARLSRUHE INSTITUTE OF TECHNOLOGY Alexei Miassoedov, alexei.miassoedov@kit.edu Giancarlo Albrecht, giancarlo.albrecht@kit.edu Jerzy-Jan Foit,
More informationComparison of In-Vessel and Ex-Vessel Retention
ÚJV Řež, a. s. Comparison of In-Vessel and Ex-Vessel Retention Jiří Duspiva Division of Nuclear Safety and Reliability Dept. of Severe Accidents and Thermomechanics Nuclear Codes & Standards Workshop Prague,
More informationALISA Project. Access to Large Infrastructures for Severe Accidents in Europe and in China
ALISA Project. Access to Large Infrastructures for Severe Accidents in Europe and in China S. ZHANG 1, A. MIASSOEDOV 2, Y. LIAO 1, J.-M. RUGGIERI 3, F. SHEN 4, X. GAUS-LIU 2 1 CNPRI, Shenzhen (CN) 4 SNPTC,
More informationIn Vessel Retention Strategy VVER 1000/320 VVER 2013 Conference
ÚJV Řež, a. s. In Vessel Retention Strategy VVER 1000/320 VVER 2013 Conference J. Zdarek Presentation content Background of SA issues VVER 1000/320 Containment and RPV Cavity Configuration IVR Strategy
More informationMODELING OF EX-VESSEL MELT POOL COOLABILITY UNDER BOTTOM FLOODING WITH DECAY HEAT SIMULATION
MODELING OF EX-VESSEL MELT POOL COOLABILITY UNDER BOTTOM FLOODING WITH DECAY HEAT SIMULATION Nitendra SINGH 1, 2, Parimal P. KULKARNI 1 and Arun K. NAYAK *1 1 : Reactor Engineering Division, Bhabha Atomic
More informationASSESSMENT OF REACTOR VESSEL INTEGRITY (ARVI)
ASSESSMENT OF REACTOR VESSEL INTEGRITY (ARVI) B.Raj. Sehgal a, O. Kymalainen b, J.M. Bonnet c, R. Sairanen d, S. Bhandari e, M. Buerger f, J. Dienstbier g, Z. Techy h, T. Theofanous i a. KTH, Sweden; b.
More informationScenarios and Phenomena Affecting Risk of Containment Failure and Release Characteristics
Contract AFT/NKS-R(18)122/4 Status Report Scenarios and Phenomena Affecting Risk of Containment Failure and Release Characteristics Weimin Ma, Anna Nieminen, Anders Riber Marklund KTH - Royal Institute
More informationResearch on the Mechanism of Debris Bed Stratification. in Vessel Lower Plenum
Research on the Mechanism of Debris Bed Stratification in Vessel Lower Plenum PEIWEN GU, KEMEI CAO, JIAYUN WANG 1 1 Shanghai Nuclear Research and Design Engineering Institute, SNERDI (China) ABSTRACT The
More informationSEVERE ACCIDENT FACILITIES FOR EUROPEAN SAFETY TARGETS. THE SAFEST PROJECT
SEVERE ACCIDENT FACILITIES FOR EUROPEAN SAFETY TARGETS. THE SAFEST PROJECT Alexei Miassoedov Karlsruhe Institute of Technology, Germany alexei.miassoedov@kit.edu Zoltán Hózer MTA Centre for Energy Research,
More informationResearch Article Analysis of TROI-13 Steam Explosion Experiment
Science and Technology of Nuclear Installations Volume 8, Article ID 8, 9 pages doi:/8/8 Research Article Analysis of TROI- Steam Explosion Experiment MitjaUršičandMatjaž Leskovar Reactor Engineering Division,
More informationModeling and Analysis of In-Vessel Melt Retention and Ex-Vessel Corium Cooling in the U. S.
Modeling and Analysis of In-Vessel Melt Retention and Ex-Vessel Corium Cooling in the U. S. E. L. Fuller, S. Basu, and H. Esmaili Office of Nuclear Regulatory Research United States Nuclear Regulatory
More informationOverview of NUGENIA TA2/SARNET status
8 TH CONFERENCE ON SEVERE ACCIDENT RESEARCH ERMSAR 2017 Overview of NUGENIA TA2/SARNET status J.P. Van Dorsselaere (IRSN), TA2/SARNET coordinator May16-18, 2017 Warsaw, Poland NUGENIA news (1/2) Members:
More informationUncertainties on Thermodynamic and Physical Property DataBases for Severe Accidents and their Consequences on Safety Calculations.
Uncertainties on Thermodynamic and Physical Property DataBases for Severe Accidents and their Consequences on Safety Calculations. Christophe JOURNEAU, Claude BRAYER and Pascal PILUSO CEA Cadarache, France
More informationMultiphase Flow Dynamics 4
Multiphase Flow Dynamics 4 Nuclear Thermal Hydraulics von Nikolay I Kolev 1. Auflage Multiphase Flow Dynamics 4 Kolev schnell und portofrei erhältlich bei beck-shop.de DIE FACHBUCHHANDLUNG Thematische
More informationS. Gupta - G. Poss - M. Sonnenkalb. OECD/NEA THAI Program for Containment Safety Research: main Insights and Perspectives
S. Gupta - G. Poss - M. Sonnenkalb OECD/NEA THAI Program for Containment Safety Research: main Insights and Perspectives. Introduction Overall objectives of OECD/NEA THAI projects: To provide containment
More informationFuel debris characterization for Decommisiioning of Fukushima Daiichi NPS
NDF Forum July 2 3, 2017, Iwaki Japan Fuel debris characterization for Decommisiioning of Fukushima Daiichi NPS Tadahiro WASHIYA July 3, 2017 Collaborative Laboratories for Advanced Decommissioning Science
More informationUniversity of Zagreb Faculty of Electrical Engineering and Computing NPP KRŠKO CONTAINMENT MODELLING WITH THE ASTEC CODE
Journal of Energy VOLUME 64 2015 journal homepage: http://journalofenergy.com/ SINIŠA ŠADEK sinisa.sadek@fer.hr DAVOR GRGIĆ davor.grgic@fer.hr University of Zagreb Faculty of Electrical Engineering and
More informationEvaluation of Two Phase Natural Circulation Flow in the Reactor Cavity under IVR-ERVC for Different Thermal Power Reactors
Evaluation of Two Phase Natural Circulation Flow in the Reactor Cavity under IVR-ERVC for Different Thermal Power Reactors Rae-Joon Park, Kwang-Soon Ha, Hwan-Yeol Kim Severe Accident & PHWR Safety Research
More informationnuclear science and technology
EUROPEAN COMMISSION nuclear science and technology Platform for Improvements in Nuclear Industry and Utility Safety (PLINIUS) Contract No: FIR1-CT-2001-40152 (Duration: 1 December 2001 to 31 May 2006)
More informationSOLID PARTICLE EFFECTS on HEAT TRANSFER in MULTILAYERED MOLTEN POOLS with GAS INJECTION
OECD Workshop on Ex-Vessel Debris Coolability Karlsruhe, Germany, 15-18 November 1999 Organised in collaboration with Forschungszentrum Karlsruhe (FZK) GmbH ABSTRACT SOLID PARTICLE EFFECTS on HEAT TRANSFER
More informationANALYSES OF AN UNMITIGATED STATION BLACKOUT TRANSIENT WITH ASTEC, MAAP AND MELCOR CODE
ANALYSES OF AN UNMITIGATED STATION BLACKOUT TRANSIENT WITH ASTEC, MAAP AND MELCOR CODE Technical Meeting on the Status and Evaluation of Severe Accident Simulation Codes for Water F. Mascari 1, J. C. De
More informationDescription of the TMI-2 Accident: OECD-Benchmark final results with ASTEC
Description of the TMI-2 Accident: OECD-Benchmark final results with ASTEC H. Muscher Institute for Applied Materials KIT University of the State of Baden-Württemberg and National Large-scale Research
More informationThe Effect of Fukushima. Research Activities in CIEMAT. Severe Accidents
The Effect of Fukushima on Research Activities in CIEMAT related to Severe Accidents Luis E. Herranz (CIEMAT), E. Riera (CSIC) Presented by: Joan Fontanet (CIEMAT) OUTLINE BACKGROUND OBJECTIVE & SCOPE
More informationProfile SFR-16 DOLMEN FRANCE Saint Paul Lez Durance FRANCE
Profile SFR-16 DOLMEN FRANCE GENERAL INFORMATION NAME OF THE FACILITY ACRONYM COOLANT(S) OF THE FACILITY LOCATION (address): OPERATOR CONTACT PERSON (name, address, institute, function, telephone, email):
More informationASTEC Model Development for the Severe Accident Progression in a Generic AP1000-Like
ASTEC Model Development for the Severe Accident Progression in a Generic AP1000-Like Lucas Albright a,b, Dr. Polina Wilhelm b, Dr. Tatjana Jevremovic a,c a Nuclear Engineering Program b Helmholtz-ZentrumDresden-Rossendorf
More informationSource terms designate typical environmental releases of radioactive substances,
1 2 Source term evaluation studies for PWRs J. FLEUROT (IRSN) J.-M. EVRARD (IRSN) B. CHAUMONT (IRSN) Source terms designate typical environmental releases of radioactive substances, which are also the
More informationA New Method Taking into Account Physical Phenomena Related to Fuel Behaviour During LOCA
S. BOUTIN S. GRAFF A. BUIRON A New Method Taking into Account Physical Phenomena Related to Fuel Behaviour During LOCA Seminar 1a - Nuclear Installation Safety - Assessment AGENDA 1. Context 2. Development
More informationCorium debris configurations in course of accident
РОССИЙСКАЯ АКАДЕМИЯ НАУК Институт проблем безопасного развития атомной энергетики RUSSIAN ACADEMY OF SCIENCES Nuclear Safety Institute (IBRAE) Corium debris configurations in course of accident Valery
More informationAccident Progression & Source Term Analysis
IAEA Training in Level 2 PSA MODULE 4: Accident Progression & Source Term Analysis Outline of Discussion Overview of severe accident progression and source term analysis Type of calculations typically
More informationAssessing and Managing Severe Accidents in Nuclear Power Plant
Assessing and Managing Severe Accidents in Nuclear Power Plant Harri Tuomisto Fortum, Finland IAEA Technical Meeting on Managing the Unexpected - From the Perspective of the Interaction between Individuals,
More informationLFW-SG ACCIDENT SEQUENCE IN A PWR 900: CONSIDERATIONS CONCERNING RECENT MELCOR / CALCULATIONS
LFW-SG ACCIDENT SEQUENCE IN A PWR 900: CONSIDERATIONS CONCERNING RECENT MELCOR 1.8.5 / 1.8.6 CALCULATIONS F. DE ROSA ENEA FIS NUC - Bologna 1 st EUROPEAN MELCOR USERS GROUP Villigen, Switzerland 15-16
More informationENERGETIC EVENT IN FUEL-COOLANT INTERACTION TEST FARO L-33
FR0108109 ENERGETIC EVENT IN FUEL-COOLANT INTERACTION TEST FARO L-33 D. MAGALLON*, I.HUHTINIEMI European Commission, Institute for Systems, Informatics and Safety, 21020 Ispra (VA), Italy Key words : FCI,
More informationQUENCH-Debris Bundle Tests on Debris Formation and Coolability SARNET-2 WP5.1 proposal
QUENCH-Debris Bundle Tests on Debris Formation and Coolability SARNET-2 WP5.1 proposal presented by J. Stuckert Institute of Apllied Materials KIT University of the State of Baden-Württemberg and National
More informationsevere accident progression in the BWR lower plenum and the modes of vessel failure
1 For Presentation at the ERMSAR Conference held in Marseilles, France, March 24-26, 2015 severe accident progression in the BWR lower plenum and the modes of vessel failure B. R. Sehgal S. Bechta Nuclear
More informationThe PARAMETER test series
The PARAMETER test series V. Nalivaev 1, A. Kiselev 2, J.-S. Lamy 3, S. Marguet 3, V. Semishkin 4, J. Stuckert, Ch. Bals 6, K. Trambauer 6, T. Yudina 2, Yu. Zvonarev 7 1 Scientific Manufacturer Centre,
More informationAbstract. Nomenclature. A Porosity function for momentum equations L Latent heat of melting (J/Kg) c Specific heat (J/kg-K) s Liquid fraction
Enthalpy Porosity Method for CFD Simulation of Natural Convection Phenomenon for Phase Change Problems in the Molten Pool and its Importance during Melting of Solids Abstract Priyanshu Goyal, Anu Dutta,
More informationDr. J. Wolters. FZJ-ZAT-379 January Forschungszentrum Jülich GmbH, FZJ
Forschungszentrum Jülich GmbH, FZJ ZAT-Report FZJ-ZAT-379 January 2003 Benchmark Activity on Natural Convection Heat Transfer Enhancement in Mercury with Gas Injection authors Dr. J. Wolters abstract A
More informationREPORT No SIMPSON STRONG-TIE AT-HP
DEPARTEMENT SECURITE, STRUCTURES et FEU Division Etudes et Essais Résistance au feu REPORT No 26045738 SIMPSON STRONG-TIE AT-HP on SIMPSON STRONG-TIE AT-HP injection systems in conjunction with concrete
More informationSafety for the future Sodium cooled Fast Reactors
Safety for the future Sodium cooled Fast Reactors S. Beils a ; B. Carluec a ; N. Devictor b ; G.L. Fiorini b ; J.F. Sauvage c a AREVA / NP, 10 Rue Juliette Récamier, 69003 Lyon, France b CEA Cadarache,
More informationThe TMI 2 severe accident: OECD benchmark activities at KIT using ASTEC
The TMI 2 severe accident: OECD benchmark activities at KIT using ASTEC H. Muscher Institute for Applied Materials KIT University of the State of Baden-Württemberg and National Large-scale Research Center
More informationPARTITIONING OF U, Zr AND FP BETWEEN MOLTEN OXIDIC AND METALLIC CORIUM. Abstract
PARTITIONING OF U, Zr AND FP BETWEEN MOLTEN OXIDIC AND METALLIC CORIUM Asmolov V.G. 1, Bechta S.V. 2, Khabensky V.B. 2, Gusarov V.V. 3, Vishnevsky V.Yu. 4, Degaltsev Yu.A. 1, Abalin S.S. 1, Krushinov E.V.
More informationThermal Hydraulics of Severe Accidents (TERMOSAN)
VTT TECHNICAL RESEARCH CENTRE OF FINLAND LTD Thermal Hydraulics of Severe Accidents (TERMOSAN) SAFIR2014 Final Seminar 19 20 March, 2015, Espoo, Finland Tuomo Sevón, Anna Nieminen, Veikko Taivassalo, Karri
More informationUnique functions of slags in steelmaking
FRUEHAN, R.J. Unique functions of slags in steelmaking. VII International Conference on Molten lags Fluxes and alts, The outh African Institute of Mining and Metallurgy, 4. Unique functions of slags in
More informationPrediction of the energy efficiency of an Ar-H2-O2 plasma torch with Ansys Fluent
Prediction of the energy efficiency of an Ar-H2-O2 plasma torch with Ansys Fluent M Vadon, Y Delannoy, G Chichignoud To cite this version: M Vadon, Y Delannoy, G Chichignoud. Prediction of the energy efficiency
More informationVESPA2012/SAFIR2014. SAFIR2014 Interim Seminar Hanasaari, Espoo. Niina Könönen (Mikko Patalainen, Kari Ikonen, Ilona Lindholm)
VESPA2012/SAFIR2014 SAFIR2014 Interim Seminar 21-22.03.2013 Hanasaari, Espoo Niina Könönen (Mikko Patalainen, Kari Ikonen, Ilona Lindholm) 2 VESPA and the main objectives Started in January 2012 Structural
More informationPROJECT PRESENTATION (PP)
PROJECT PRESENTATION (PP) Severe Accident Research Network of Excellence SARNET2 Contract (grant agreement) number: FP7-231747 Author(s): J.P. Van Dorsselaere (IRSN) Date of issue of this report: June
More informationOverview of Containment Issues and Major Experimental Activities
Overview of Containment Issues and Major Experimental Activities L. Meyer, H. Wilkening, H. Jacobs, H. Paillere The first European Review Meeting on Severe Accident Research () Aix-en-Provence, France,
More informationDEVELOPMENT OF ADVANCED MIXED OXIDE FUELS FOR PLUTONIUM MANAGEMENT
LA-UR-97-2462 June 1997 DEVELOPMENT OF ADVANCED MIXED OXIDE FUELS FOR PLUTONIUM MANAGEMENT Stacey Eaton, Carl Beard, John Buksa, Darryl Butt, Kenneth Chidester, George Havrilla, and Kevin Ramsey DEVELOPMENT
More informationPyrometallurgy of iron is still the most important pyrometallurgical process economically.
1 Pyrometallurgy of iron is still the most important pyrometallurgical process economically. Prehistorically, iron was prepared by simply heating it with charcoal in a fired clay pot. Coke is coal that
More informationNUGENIA R&D ON SAFETY ISSUES - PERSPECTIVES IN THE DOMAINS OF AGEING AND OF SEVERE ACCIDENTS
NUGENIA R&D ON SAFETY ISSUES - PERSPECTIVES IN THE DOMAINS OF AGEING AND OF SEVERE ACCIDENTS E. Keim*, J.-P. Van Dorsselaere** * AREVA NP GmbH, Paul Gossen Strasse 100, 91052 Erlangen, Germany ** Institut
More informationLACOMECO Experimental Platform at KIT
LACOMECO Experimental Platform at KIT A. Miassoedov, X.Gaus-Liu, T. Jordan, L. Meyer, W. Tromm, M. Steinbrück Karlsruhe Institute of Technology 76344 Eggenstein-Leopoldshafen, Germany Alexei.miassoedov@kit.edu,
More informationEnglish - Or. English NUCLEAR ENERGY AGENCY COMMITTEE ON THE SAFETY OF NUCLEAR INSTALLATIONS
Unclassified NEA/CSNI/R(2015)3 NEA/CSNI/R(2015)3 Unclassified Organisation de Coopération et de Développement Économiques Organisation for Economic Co-operation and Development 19-Jun-2015 English - Or.
More informationDEVELOPING AND IMPLEMENTATION OF A FATIGUE MONITORING SYSTEM FOR THE NEW EUROPEAN PRESSURIZED WATER REACTOR EPR
DEVELOPING AND IMPLEMENTATION OF A FATIGUE MONITORING SYSTEM FOR THE NEW EUROPEAN PRESSURIZED WATER REACTOR EPR Christian Pöckl, Wilhelm Kleinöder AREVA NP GmbH Freyeslebenstr. 1, 91058 Erlangen, Germany
More informationRecent Contributions of OECD-WGAMA to the Severe Accident Field
Recent Contributions of OECD-WGAMA to the Severe Accident Field Luis E. Herranz a,*, D. Jacquemain b, N. Sandberg c a Centro de Investigaciones Energéticas, Medioambientales y Tecnológicas (CIEMAT), Avda.
More informationValidation of the FCI codes against DEFOR-A data on the mass fraction of agglomerated debris
Validation of the FCI codes against DEFOR-A data on the mass fraction of agglomerated debris Session 2, paper 2-9 The issue of debris bed formation Interaction of corium melt with water yields melt fragmentation
More informationSynthesis of Copper Chromium Alloys by Alumninothermic Reduction
Synthesis of Copper Chromium Alloys by Alumninothermic Reduction Dipl.-Ing. S. Hassan Pour, Prof. Dr. Ing. Dr. h.c. B. Friedrich IME Process Metallurgy and Metal Recycling Intzestraße 3 Aachen, Germany
More informationValidation studies of CFD codes on hydrogen combustion
Validation studies of CFD codes on hydrogen combustion Sudarat Worapittayaporn, Luciana Rudolph, Harald Dimmelmeier AREVA NP GmbH ERMSAR 2012, Cologne, March 21 23, 2012 Content Introduction Validation
More informationEvolution of Nuclear Energy Systems
ALLEGRO Project 2 Evolution of Nuclear Energy Systems 3 General objectives Gas cooled fast reactors (GFR) represent one of the three European candidate fast reactor types. Allegro Gas Fast Reactor (GFR)
More informationOECD/SERENA Project Report
Nuclear Safety NEA/CSNI/R(2014)15 February 2015 www.oecd-nea.org OECD/SERENA Project Report Summary and Conclusions Unclassified NEA/CSNI/R(2014)15 NEA/CSNI/R(2014)15 Unclassified Organisation de Coopération
More informationEffect of CO Gas Concentration on Reduction Rate of Major Mineral Phase in Sintered Iron Ore
, pp. 570 575 Effect of CO Gas Concentration on Reduction Rate of Major Mineral Phase in Sintered Iron Ore Daisuke NOGUCHI, 1) * Ko-ichiro OHNO, 2) Takayuki MAEDA, 2) Kouki NISHIOKA 3) and Masakata SHIMIZU
More information