Swivel Joints. dixonvalve.com Customer Service:

Size: px

Start display at page:

Download "Swivel Joints. dixonvalve.com Customer Service:"

Basil Rice
6 years ago
Views:

1 NUFACTURING QUALITY SERVICE MANUFACTURING QUALITY SERVICE MANUFACTURING QUALITY SERVICE MANUFACTU Swivel Joints dixonvalve.com Customer Service:

2 Safety Dixon's couplings and retention devices are designed to work safely for their intended use. The selection of the proper hose, coupling and retention device, and the proper application of the coupling to the hose are of utmost importance. Users must consider the size, temperature, application, media, pressure and hose and coupling manufacturer's recommendations when selecting the proper hose assembly components. Dixon recommends that all hose assemblies be tested in accordance with the Association for Rubber Products Manufacturer's (ARPM) recommendations and be inspected regularly (before each use) to ensure that they are not damaged or have become loose. Visit ARPMINC.com for more information. Where safety devices are integral to the coupling, they must be working and utilized. The use of supplementary safety devices such as safety clips or safety cables are recommended. If any problem is detected, couplings must be removed from service immediately. Dixon is available to consult, train and recommend the proper selection and application of all fittings we sell. We strongly recommend that distributors and end users make use of Dixon's Testing and Recommendation Services. Call or click dixonvalve.com to learn more. Features and Benefits Full 60 rotational movement offers maximum flexibility Wide spacing between dual ball bearing raceways ensures greater loadbearing capacity Precisionmachined design ensures alignment and years of troublefree service An Oring dust seal protects the ball races and seal chamber from outside elements. The radius elbow design ensures a smooth flow pattern All weights and dimensions are approximate and subject to change without notice. Consult the factory when critical. Color Coding System for Seal Identification: BU BunaN red stripe VI FKM green stripe TF PTFE natural EP Ethylene Propylene green and white stripes ORing Style Swivels Swivel Styles The Oring pressure seal ensures a leakproof seal and smoother rotation at lower torques than multiple designs. Springloaded PTFE pressure seals are available through " Carbon steel and stainless steel Oring type swivels provide greater strength and corrosion resistance when needed for lower torque applications VRing Style Swivels The springloaded triple Vring sealing system ensures a leakproof seal and an extended seal life compared to the conventional single Oring design. The " 8" carbon steel swivels are manufactured from carbon steel with flame hardened dual raceways for greater load bearing capacity and longer life. Stainless steel swivels are manufactured in 6 grade stainless steel for superior corrosion resistance. Dixon

3 Swivel Joints Flange Bolt Tightening Sequence (use appropriate gaskets and bolts) 4 Bolt 8 Bolt Bolt of 50 lb. ASA Steel Flanges Nominal Pipe Size Flange O.D. Thickness * OD of Raised Face Diameter of Bolt Circle Number of Bolts Diameter of Bolt Holes Diameter of Bolts " /" " /" " 4" 5" 6" 8" 0" " 4/" 5" 6" 7" 7/" 9" 0" " /" 6" 9" 9/6" /6" /4" 7/8" 5/6" 5/6" 5/6" " /8" /6" /4" " 7/8" 5/8" 4/8" 5" 6/6" 75/6" 8/" 05/8" /4" 5" /8" 7/8" 4/4" 5/" 6" 7/" 8/" 9/" /4" 4/4" 7" /8" 5/8" /4" /4" /4" /4" 7/8" 7/8" 7/8" " " /" /" 5/8" 5/8" 5/8" 5/8" /4" /4" /4" 7/8" 7/8" * /6" raised face is included in the thickness Threaded Applications Flange Diagrams Welded Applications threaded flange with raised face slipon flange with raised face weld neck flange with raised face Floating Applications (flange free to swivel) slipon flange with raised face Dixon lapjoint flange

4 Operation / Service Dixon swivels are recommended for use at the following maximum NonShock Cold Working Pressures (NSCWP) provided in PSI, at ambient temperatures (70 F). " ¼" ½" " " 4" 6" 8" (VRing) Carbon Steel CS (ORing) Carbon Steel OC (VRing) Stainless Steel SS (ORing) Stainless Steel OS Aluminum AL Brass BR Malleable Iron MI When using flanged ends, the pressure rating will be reduced to coincide with that of the flange being used. Carbon steel and stainless steel 50# flanges are recommended for use at 75 maximum PSI at ambient temperature (70 F). Lubrication should be performed periodically, depending on service and operation conditions. Twice yearly is normally sufficient. All dimensions are approximate. Where critical, consult the factory. Options Available: Any combination of end configurations Alternative seal materials: FKM, PTFE, Ethylene Propylene and FDA Buna Alternative ball bearing materials: 440 stainless steel and 6 stainless steel Alternative grease materials: FDA approved/food grade and silicone Drain holes or counter balance lugs Swivels for oxygen service, steam service and submerged service can be specifically designed for unique applications (special order) Use with Hose The use of swivel joints to compensate for twist in hose (i.e. Style 0 or Style 60) should be carefully reviewed, since the hose must be sufficiently stiff to generate the torque needed to actuate the swivel before it kinks. In many installations, the twist is caused by lateral movement that can be eliminated by the use of a swivel joint that addresses the lateral movement (i.e. Style 40 or Style 0). Where this is not possible, the use of hose swivels may be a solution. Hose swivels are generally nonball bearing designs that require less torque to initiate rotation; however, hose swivels are not designed for load bearing service. Some hoses are unable to generate even the low torque required for a hose swivel, many metal hoses fall into this group. Other hoses are stiff enough to turn almost any swivel, many armored hoses fall into this group. Pricing All pricing available upon request. Please contact factory for pricing and proper equipment selection for the correct application. Every swivel joint is built to order, due to this, they are not generally returnable. Return requests will be reviewed on a case by case basis. Restocking charges will be applicable on all returns. Restocking charges include 5%, plus any additional costs incurred. 4 Dixon

5 To select the proper swivel joint you need the following information: Ordering Information Swivels Swivel Joints Size: End Configuration: Maximum Working Pressure: Style (shape): Material: Temperature Range: Product being handled: (if a chemical, please advise concentration) If for constant rotation, advise RPM: If for suction service, advise maximum vacuum in inches of Mercury (Hg): Our factory sales and engineering staff will be happy to help you evaluate your swivel application. Please call Example swivel size [A] swivel style 0 [B] end configuration F [C] end configuration F [C] swivel material CS [D] pressure seal 0 [E] (BunaN standard) dust seal 0 [F] (BunaN standard) retainers (VRing ONLY) [G] ball bearings 0 [H] (carbon steel standard) grease 0 [I] [A] Size [B] Style (see diagrams) [C] End Connections W Weld End F Female End FG 50# ASA Flange TF Tank Truck Flange PF 00# ASA flange (not available on aluminum) [D] Material CS (VRing) carbon steel SS (VRing) stainless steel AL aluminum BR brass MI malleable iron OC (ORing) carbon steel OS (ORing) stainless steel Code # [E] Pressure Seal [F] Dust Seal [G] Retainers [H] Ball Bearings [I] Grease 0 BunaN (standard) BunaN (standard) No retainers (Oring swivels) Carbon steel (standard) Standard FKM FKM Aluminum (standard in CS Vring) 440 grade stainless FDA approved/ Food grade PTFE PTFE (standard in SS Vring) 6 grade stainless Silicone (required with EPR seals) Ethylene Propylene (requires silicone grease) Ethylene Propylene (requires silicone grease) 4 FDA Buna (Oring only) FDA Buna The swivel should be packed so that the surfaces coming in contact with the fluid being handled are compatible with that fluid. In the case of the use of the swivel in submerged service this would include the dust seals and ball bearings. Dixon always recommends the use of stainless steel ball bearings when building a swivel for submerged service since the standard carbon steel bearings could rust together making it impossible to disassemble the swivel and possibly affecting its operation. Dixon

6 VRing Parts Identification List 8. body. sleeve. ball bearings 4. seal retainer 5. Vring (pressure) seal 6. spring retainer 7. spring 8. ball retainer screw grease fitting 0. Oring (dust) seal weld end shown Other available end configurations: Male NPT thread 00# ASA flange Tank car thread with gasket TTMA tank truck flange British pipe thread Special Options 45 Swivel assembly (style 0 shown) Swivel assembly with counterweight lug (style 50 shown) 6 Dixon

7 Typical VRing Swivel Applications Loading Arm Vring Swivel Joints Floating Roof Drain Floating Suction Dixon

8 VRing Swivel Seal Replacement Procedure Remove the ball retainer screws. Add a sufficient amount of solvent into each raceway to flush out the lubricant. Rotate the sleeve, catching the balls as they fall out. When all the balls have been removed, the body and sleeve can be separated. Discard old seals. Thoroughly clean the body, sleeve retainer, spring retainer and springs. * 5Insert sleeve into body, compressing swivel joint together until ball races of body and sleeve are in alignment (do not rotate either unit while compressing). Care should be taken to avoid pinching or scoring of V rings. Drop balls into raceway holes, rotating the sleeve slowly as you load. To make space for all the balls, insert a screw driver into the raceway while continuing to rotate the sleeve in one direction (be careful not to damage the threads). This will cause the balls to jam up, making room for the remaining balls. Now reverse the rotation of the sleeve and insert the remaining balls. Lubricate the body unit with a Moly lubricant or equivalent. 6Reinstall ball retainer screws until tight. If this interferes with the smooth rotation of the ball bearings, then back off /8 /4 turn. A thread locking sealant is recommended to prevent screws from backing off. After pressure testing, the unit is ready for installation. Place the assembled spring retainer unit (spring end first) into the body. Place the set of V rings onto the spring retainer. Be sure V rings are installed with the sealing lips facing toward the retainer. Lubricate the body and seals with a Moly lubricant or equivalent. * The last coil of the springs has been upset (OD slightly larger). When upset end is inserted into the holes provided in the spring retainer, the springs remain secure. 4Set the dust seal into O ring groove on the sleeve. Place the seal retainer on the sleeve with the grooved end facing the V rings. Lubricate the sleeve with grease. Caution: Body and sleeve are matched during manufacturing. Do not mix components with other units. 8 Dixon

9 Optional Seals for VRing Swivels Vring Swivel Joints VRing Pressure Seals VRing pressure seal material: FKM, PTFE (SS), PTFE (CS and AL) which includes changing to PTFE retainers, EPR and BunaN, BunaN is standard. VRing pressure seals are available in '', '', 4'', 6'' and 8" ORing Dust Seals Dust seal material: FKM, EPR and BunaN, BunaN is standard. Oring dust seals are available in '', '', 4'', 6'' and 8'' Carbon steel Vring swivels come standard with aluminum retainers. These must be compatible with the material flowing through the swivel. PTFE retainers are available. Rebuild Kits for VRing Swivels Vring swivel rebuild kit each kit contains Vrings in the material indicated, BunaN dust seal, ball retainer screws, grease plug and 0 ball bearings. The spring retainer and seal retainer are not included in the Vring swivel rebuild kits. Size Buna FKM PTFE EPR " RKVBU RKVVI RKVTF RKVEP " RKVBU RKVVI RKVTF RKVEP 4" 4RKVBU 4RKVVI 4RKVTF 4RKVEP 6" 6RKVBU 6RKVVI 6RKVTF 6RKVEP 8" 8RKVBU 8RKVVI 8RKVTF 8RKVEP Note: All rebuild kits are per plane of rotation Material: 440 stainless steel or 6 stainless steel Ball bearings are available in '', '', 4'', 6'' and 8'' Optional Ball Bearings for VRing Swivels Replacement Ball Bearings for VRing Swivels Size Quantity Per Plane of Rotation Carbon Steel (standard) 440 Stainless Steel 6 Stainless Steel Part # Part # Part # " 50 8CSBA 8SSBA 8SSBA6 " 6 8CSBA 8SSBA 8SSBA6 4" 84 8CSBA 8SSBA 8SSBA6 6" 96 CSBA SSBA SSBA6 8" 84 4CSBA 4SSBA 4SSBA6 Dixon

Single Plane VRing Style 0 Weld end x Weld end " 0WW " 0WW 4" 40WW 6" 60WW 8" 80WW CS carbon steel 9. SS stainless steel 9.

5 AL aluminum.6 CS carbon steel 78. SS stainless steel 9. AL aluminum 5.

damage the seals. Care should be taken to avoid distortion of seal and ball race diameters.

10 Single Plane VRing Style 0 Weld end x Weld end " 0WW " 0WW 4" 40WW 6" 60WW 8" 80WW CS carbon steel 9. SS stainless steel 9. CS carbon steel.9 SS stainless steel. CS carbon steel 4.4 SS stainless steel 5. CS carbon steel 54.5 SS stainless steel 56.5 AL aluminum.6 CS carbon steel 78. SS stainless steel 9. AL aluminum 5. A 55/6" 5/4" 7" 8/8" 85/8" Caution: Weld end swivel joints should be completely disassembled prior to welding, so as not to damage the seals. Care should be taken to avoid distortion of seal and ball race diameters. Swivels are shipped standard with the following components: BunaN for pressure seals and dust seals Carbon steel for ball bearings Aluminum for retainers in carbon steel swivels PTFE for retainers in stainless steel swivels 0 Dixon

Single Plane VRing Style 0 Female NPT x Female NPT Vring Swivel Joints " 0FF " 0FF 4" 40FF

0 SS stainless steel 8.4 CS carbon steel 6.7 SS stainless steel 7.7 CS carbon steel 67.

8 CS carbon steel SS stainless steel AL aluminum A 8/6" 0" /4" /8" 7/8" 50# ASA Flange x

7 SS stainless steel. CS carbon steel 6.0 SS stainless steel 5. CS carbon steel 57.

11 Single Plane VRing Style 0 Female NPT x Female NPT Vring Swivel Joints " 0FF " 0FF 4" 40FF 6" 60FF 8" 80FF CS carbon steel.7 SS stainless steel. CS carbon steel 7.0 SS stainless steel 8.4 CS carbon steel 6.7 SS stainless steel 7.7 CS carbon steel 67.5 SS stainless steel 69.5 AL aluminum 5.8 CS carbon steel SS stainless steel AL aluminum A 8/6" 0" /4" /8" 7/8" 50# ASA Flange x 50# ASA Flange " 0FGFG " 0FGFG 4" 40FGFG 6" 60FGFG 8" 80FGFG CS carbon steel.7 SS stainless steel. CS carbon steel 6.0 SS stainless steel 5. CS carbon steel 57.4 SS stainless steel 58. CS carbon steel 04. SS stainless steel 06. AL aluminum 9.0 CS carbon steel 6. SS stainless steel 70. AL aluminum 6.0 A 05/6" /4" " 5/8" 65/8" Dixon

Single Plane VRing Style 0 Female NPT x Female NPT A B " 0FF " 0FF 4" 40FF 6" 60FF CS

CS carbon steel 4.4 SS stainless steel 44.4 CS carbon steel 84. SS stainless steel 84.

5 9" /6" 07/8" 5/8" /8" 6/8" 6/4" 77/8" Swivels are shipped standard with the following

12 Single Plane VRing Style 0 Female NPT x Female NPT A B " 0FF " 0FF 4" 40FF 6" 60FF CS carbon steel. SS stainless steel. CS carbon steel 0.6 SS stainless steel. CS carbon steel 4.4 SS stainless steel 44.4 CS carbon steel 84. SS stainless steel 84. AL aluminum.5 9" /6" 07/8" 5/8" /8" 6/8" 6/4" 77/8" Swivels are shipped standard with the following components: BunaN for pressure seals and dust seals Carbon steel for ball bearings Aluminum for retainers in carbon steel swivels PTFE for retainers in stainless steel swivels Dixon

Single Plane VRing Style 0 0# ASA Flange x 50# ASA Flange Vring Swivel Joints A B " 0FGFG " 0FGFG 4" 40FGFG

CS carbon steel 6.6 SS stainless steel 64.8 CS carbon steel.0 SS stainless steel 0.9 AL aluminum 44.

6 9/6" 4/" /" 5/4" 4" 7" 77/8" 9/" 05/8" " Swivels are shipped standard with the following components: BunaN

13 Single Plane VRing Style 0 0# ASA Flange x 50# ASA Flange Vring Swivel Joints A B " 0FGFG " 0FGFG 4" 40FGFG 6" 60FGFG 8" 80FGFG CS carbon steel.7 SS stainless steel. CS carbon steel 9.4 SS stainless steel 8. CS carbon steel 6.6 SS stainless steel 64.8 CS carbon steel.0 SS stainless steel 0.9 AL aluminum 44.7 CS carbon steel 96. SS stainless steel 07.9 AL aluminum /6" 4/" /" 5/4" 4" 7" 77/8" 9/" 05/8" " Swivels are shipped standard with the following components: BunaN for pressure seals and dust seals Carbon steel for ball bearings Aluminum for retainers in carbon steel swivels PTFE for retainers in stainless steel swivels Dixon

Single Plane VRing Style 40 Female NPT x Female NPT A B C " 40FF " 40FF 4" 440FF 6" 640FF CS

6 SS stainless steel 5. CS carbon steel 0. SS stainless steel 98.9 AL aluminum 9.

the following components: BunaN for pressure seals and dust seals Carbon steel for ball

14 Single Plane VRing Style 40 Female NPT x Female NPT A B C " 40FF " 40FF 4" 440FF 6" 640FF CS carbon steel. SS stainless steel. CS carbon steel 4.0 SS stainless steel 4. CS carbon steel 48.6 SS stainless steel 5. CS carbon steel 0. SS stainless steel 98.9 AL aluminum /6" /6" 7/8" /4" 5/8" 0/4" 5" 6/8" /4" 0/8" 77/8" 5/4" Swivels are shipped standard with the following components: BunaN for pressure seals and dust seals Carbon steel for ball bearings Aluminum for retainers in carbon steel swivels PTFE for retainers in stainless steel swivels 4 Dixon

Single Plane VRing Style 40 50# ASA Flange x 50# ASA Flange Vring Swivel Joints A B C " 40FGFG " 40FGFG 4"

CS carbon steel 69.8 SS stainless steel 7.5 CS carbon steel 7.8 SS stainless steel 5.6 AL aluminum 5.

95/6" 4/" 9" /4" 5/4" /" 5" 7" 4" 0/8" 9/" 9" 45/8" " 4" Swivels are shipped standard with the following

15 Single Plane VRing Style 40 50# ASA Flange x 50# ASA Flange Vring Swivel Joints A B C " 40FGFG " 40FGFG 4" 440FGFG 6" 640FGFG 8" 840FGFG CS carbon steel.7 SS stainless steel. CS carbon steel 4.8 SS stainless steel 4. CS carbon steel 69.8 SS stainless steel 7.5 CS carbon steel 7.8 SS stainless steel 5.6 AL aluminum 5. CS carbon steel 0. SS stainless steel 45.5 AL aluminum 9. 95/6" 4/" 9" /4" 5/4" /" 5" 7" 4" 0/8" 9/" 9" 45/8" " 4" Swivels are shipped standard with the following components: BunaN for pressure seals and dust seals Carbon steel for ball bearings Aluminum for retainers in carbon steel swivels PTFE for retainers in stainless steel swivels Dixon

6 95/6" /6" /6" /4" 5/8" 6" 5" 6/8" 9/4" 0/8" 77/8" 4/8" Swivels are shipped standard with the following components: BunaN for pressure seals

16 Double Plane VRing Style 50 Female NPT x Female NPT A B C " 50FF " 50FF 4" 450FF 6" 650FF CS carbon steel.8 SS stainless steel. CS carbon steel 6.9 SS stainless steel 7. CS carbon steel 7.0 SS stainless steel 76. CS carbon steel 55.6 SS stainless steel AL aluminum /6" /6" /6" /4" 5/8" 6" 5" 6/8" 9/4" 0/8" 77/8" 4/8" Swivels are shipped standard with the following components: BunaN for pressure seals and dust seals Carbon steel for ball bearings Aluminum for retainers in carbon steel swivels PTFE for retainers in stainless steel swivels 6 Dixon

8 CS carbon steel 08.6 SS stainless steel 7.8 AL aluminum 7.

17 Double Plane VRing Style 50 50# ASA Flange x 50# ASA Flange Vring Swivel Joints A B C " 50FGFG " 50FGFG 4" 450FGFG 6" 650FGFG 8" 850FGFG CS carbon steel.8 SS stainless steel. CS carbon steel 55.7 SS stainless steel 54. CS carbon steel 94. SS stainless steel 96.6 CS carbon steel 9. SS stainless steel 9. AL aluminum 7.8 CS carbon steel 08.6 SS stainless steel 7.8 AL aluminum /6" 4/" 45/6" /4" 5/4" 7/4" 5" 7" " 0/8" 9/" 7/8" 45/8" " 5/8" Swivels are shipped standard with the following components: BunaN for pressure seals and dust seals Carbon steel for ball bearings Aluminum for retainers in carbon steel swivels PTFE for retainers in stainless steel swivels Dixon

Double Plane VRing Style 60 Female NPT x Female NPT " 60FF " 60FF 4" 460FF 6" 660FF CS

0 CS carbon steel 7.00 SS stainless steel 7.00 CS carbon steel 8.

18 Double Plane VRing Style 60 Female NPT x Female NPT " 60FF " 60FF 4" 460FF 6" 660FF CS carbon steel.40 SS stainless steel.50 CS carbon steel 4.0 SS stainless steel 4.0 CS carbon steel 7.00 SS stainless steel 7.00 CS carbon steel 8.00 SS stainless steel AL aluminum A 9" 07/8" /8" 6/4" Swivels are shipped standard with the following components: BunaN for pressure seals and dust seals Carbon steel for ball bearings Aluminum for retainers in carbon steel swivels PTFE for retainers in stainless steel swivels 8 Dixon

19 Double Plane VRing Style 60 50# ASA Flange x 50# ASA Flange Vring Swivel Joints " 60FF " 60FF 4" 460FF 6" 660FF 8" 860FGFG CS carbon steel 4.00 SS stainless steel 4.00 CS carbon steel 8.00 SS stainless steel 8.00 CS carbon steel SS stainless steel CS carbon steel 7.00 SS stainless steel 7.00 AL aluminum CS carbon steel.00 SS stainless steel.00 AL aluminum A 9/6" /" 4" 77/8" 05/8" Swivels are shipped standard with the following components: BunaN for pressure seals and dust seals Carbon steel for ball bearings Aluminum for retainers in carbon steel swivels PTFE for retainers in stainless steel swivels Dixon

Double Plane VRing Style 70 Female NPT x Female NPT A B " 70FF " 70FF 4" 470FF 6" 670FF CS

CS carbon steel 79. SS stainless steel 8.9 CS carbon steel 7.

standard with the following components: Buna N for pressure seals and dust seals Carbon

20 Double Plane VRing Style 70 Female NPT x Female NPT A B " 70FF " 70FF 4" 470FF 6" 670FF CS carbon steel.7 SS stainless steel 4.5 CS carbon steel 40. SS stainless steel 40. CS carbon steel 79. SS stainless steel 8.9 CS carbon steel 7.4 SS stainless steel AL aluminum 95/6" /6 /4" 5/8" 5" 6/8" 0/8" 77/8" Swivels are shipped standard with the following components: Buna N for pressure seals and dust seals Carbon steel for ball bearings Aluminum for retainers in carbon steel swivels PTFE for retainers in stainless steel swivels 0 Dixon

Double Plane VRing Style 70 50# ASA Flange x 50# ASA Flange Vring Swivel Joints A B " 70FGFG " 70FGFG 4" 470FGFG 6" 670FGFG 8" 870FGFG CS carbon steel.8 SS stainless steel. CS carbon steel 59.

21 Double Plane VRing Style 70 50# ASA Flange x 50# ASA Flange Vring Swivel Joints A B " 70FGFG " 70FGFG 4" 470FGFG 6" 670FGFG 8" 870FGFG CS carbon steel.8 SS stainless steel. CS carbon steel 59. SS stainless steel 57. CS carbon steel 00.4 SS stainless steel 0. CS carbon steel 09. SS stainless steel 06.8 AL aluminum 8.5 CS carbon steel 4.6 SS stainless steel 75.4 AL aluminum /6" 4/" /4" 5/4" 5" 7" 0/8" 9/" 45/8" " Swivels are shipped standard with the following components: BunaN for pressure seals and dust seals Carbon steel for ball bearings Aluminum for retainers in carbon steel swivels PTFE for retainers in stainless steel swivels Dixon

Triple Plane VRing Style 80 Female NPT x Female NPT A B C " 80FF " 80FF 4" 480FF 6" 680FF CS

6 SS stainless steel 08.0 CS carbon steel 6.9 SS stainless steel 6.

standard with the following components: BunaN for pressure seals and dust seals Carbon steel

22 Triple Plane VRing Style 80 Female NPT x Female NPT A B C " 80FF " 80FF 4" 480FF 6" 680FF CS carbon steel.0 SS stainless steel.5 CS carbon steel 5. SS stainless steel 5. CS carbon steel 0.6 SS stainless steel 08.0 CS carbon steel 6.9 SS stainless steel 6.6 AL aluminum 95/6" 99/6" /6" /4" 07/8" 5/8" 5" /8" 6/8" 0/8" 6/4" 77/8" Swivels are shipped standard with the following components: BunaN for pressure seals and dust seals Carbon steel for ball bearings Aluminum for retainers in carbon steel swivels PTFE for retainers in stainless steel swivels Dixon

Triple Plane VRing Style 80 50# ASA Flange x 50# ASA Flange Vring Swivel Joints A B C " 80FGFG " 80FGFG 4" 480FGFG

CS carbon steel 4.8 SS stainless steel 8.4 CS carbon steel 6.6 SS stainless steel 6. AL aluminum 0.

0 95/6" 9/6" 4/" /4" /" 5/4" 5" 4" 7" 0/8" 77/8" 9/" 45/8" 05/8" " Swivels are shipped standard with the following

23 Triple Plane VRing Style 80 50# ASA Flange x 50# ASA Flange Vring Swivel Joints A B C " 80FGFG " 80FGFG 4" 480FGFG 6" 680FGFG 8" 880FGFG CS carbon steel 4. SS stainless steel 4.4 CS carbon steel 7.0 SS stainless steel 70. CS carbon steel 4.8 SS stainless steel 8.4 CS carbon steel 6.6 SS stainless steel 6. AL aluminum 0. CS carbon steel 40.9 SS stainless steel AL aluminum /6" 9/6" 4/" /4" /" 5/4" 5" 4" 7" 0/8" 77/8" 9/" 45/8" 05/8" " Swivels are shipped standard with the following components: BunaN for pressure seals and dust seals Carbon steel for ball bearings Aluminum for retainers in carbon steel swivels PTFE for retainers in stainless steel swivels Dixon

SS stainless steel AL aluminum 95/6" 9" /4" 07/8" 5" /8" 0/8" 6/4" Swivels are shipped standard with the following components: BunaN

24 Triple Plane VRing Style 0 Female NPT x Female NPT A B " 0FF " 0FF 4" 40FF 6" 60FF CS carbon steel.0 SS stainless steel.5 CS carbon steel 49.8 SS stainless steel 50.4 CS carbon steel 97.4 SS stainless steel 0. CS carbon steel 0. SS stainless steel AL aluminum 95/6" 9" /4" 07/8" 5" /8" 0/8" 6/4" Swivels are shipped standard with the following components: BunaN for pressure seals and dust seals Carbon steel for ball bearings Aluminum for retainers in carbon steel swivels PTFE for retainers in stainless steel swivels 4 Dixon

CS carbon steel 86.9 SS stainless steel 40. AL aluminum 6.

25 Triple Plane VRing Style 0 50# ASA Flange x 50# ASA Flange Vring Swivel Joints A B " 0FGFG " 0FGFG 4" 40FGFG 6" 60FGFG 8" 80FGFG CS carbon steel 4. SS stainless steel 4.4 CS carbon steel 68.6 SS stainless steel 67.4 CS carbon steel 8.6 SS stainless steel.7 CS carbon steel. SS stainless steel.9 AL aluminum 97. CS carbon steel 86.9 SS stainless steel 40. AL aluminum /6" 9/6" /4" /" 5" 4" 0/8" 77/8" 45/8" 05/8" Swivels are shipped standard with the following components: BunaN for pressure seals and dust seals Carbon steel for ball bearings Aluminum for retainers in carbon steel swivels PTFE for retainers in stainless steel swivels Dixon

ORing Parts Identification List ) Oring (dust) seal ) ball

bearings female NPT shown Other available end configurations:

PTFE Pressure Seal for ORing Swivels Cross Sectional View of

Swivel with Handle (style 40 shown) Tank Car Swivel (style 0

26 ORing Parts Identification List ) Oring (dust) seal ) ball retainer screw ) Oring (pressure) seal 4) grease fitting 5) ball bearings female NPT shown Other available end configurations: Tank car thread with gasket TTMA tank truck flange SpringLoaded PTFE Pressure Seal for ORing Swivels Cross Sectional View of Seal (for use in sizes " ") Special Options for ORing Swivels Swivel with Handle (style 40 shown) Tank Car Swivel (style 0 shown) 6 Dixon Swivel Assembly with Counterweight Lug (style 40 shown)

27 Typical Applications for ORing Swivels Loading Arm Oring Swivel Joints Hose Loaders Note: style 60 may also be used in this application Dixon

28 ORing Swivel Seal Replacement Procedure Note: Instructions not for assembly with springloaded PTFE pressure seal. Consult the factory. Remove the ball retainer screws. Add a sufficient amount of solvent into each raceway to flush out the lubricant. Rotate the sleeve, catching the balls as they fall out. When all the balls have been removed, the body and sleeve can be separated. Discard old seals. Thoroughly clean the body and sleeve. 4Insert the sleeve into the body, slowly rotate the sleeve while inserting into the body. Install the new O rings on the sleeve, dust seal to the rear, product (pressure) seal up front. 5When the sleeve is fully inserted, feed the ball bearings into the raceways while rotating the sleeve. To make space for all the balls, insert a screw driver into the raceway, while continuing to rotate the sleeve in one direction (be careful not to damage the threads). This will cause the balls to jam up, making room for the remaining balls. Now reverse rotation of sleeve and insert the remaining balls. Lubricate the body and the sleeve with grease. 8 Dixon Reinstall ball retainer screws until tight. If this interferes with the smooth rotation of the ball bearings, then back off /8 /4 turn. A thread locking sealant is recommended to prevent screws from backing off. After pressure testing, the unit is ready for installation. Caution: Body and sleeve are matched during manufacturing. Do not mix components with other units.

29 Oring Swivel Joints Optional Seals for ORing Swivels ORing Pressure Seals Oring pressure seal material: FKM, springloaded PTFE, EPR, food grade Buna and BunaN, BunaN is standard. Oring pressure seals are availble in '', ¼ and ½", '', '' and 4'' ORing Dust Seals Dust seal material: FKM, EPR and BunaN, BunaN is standard. Oring dust seals are available in '', ¼, ½", '', '' and 4''. Note: When a change of seals is ordered, only the pressure seal is changed unless specifically requested by the customer. Rebuild Kits for ORing Swivels Oring swivel rebuild kit each kit contains Oring (pressure seal) in the material indicated, BunaN dust seal, ball retainer screws, grease plug and 0 ball bearings. Size Buna FKM PTFE EPR " RKOBU RKOVI RKOTF ¼ and ½" 50RKOBU 50RKOVI 50RKOTF 50RKOEP " RKOBU RKOVI RKOTF RKOEP " RKOBU RKOVI RKOTF RKOEP 4" 4RKOBU 4RKOVI 4RKOEP Note: All rebuild kits are per plane of rotation Material: 440 stainless steel or 6 stainless steel Ball bearings are offered in '', ¼",½", '', '' and 4'' Optional Ball Bearings for ORing Swivels Size Replacement Ball Bearings for ORing Swivels Quantity Per Plane of Rotation Carbon Steel (standard) 440 Stainless Steel 6 Stainless Steel Part # Part # Part # " 40 4CSBA 4SSBA 4SSBA6 " 56 4CSBA 4SSBA 4SSBA6 4" 46 8CSBA 8SSBA 8SSBA6 6" 60 8CSBA 8SSBA 8SSBA6 8" 80 8CSBA 8SSBA 8SSBA6 Dixon

Single Plane ORing Style 0 Female NPT x Female NPT A OC carbon steel.80 " 0FF OS stainless steel.

55 ½" 500FF AL aluminum.40 4" BR brass 4.0 MI malleable iron.80 OC carbon steel 6.0 OS stainless steel 6.

60 OS stainless steel 9.00 57/8" " 0FF AL aluminum 4.00 BR brass.0 59/" MI malleable iron 9.

30 Single Plane ORing Style 0 Female NPT x Female NPT A OC carbon steel.80 " 0FF OS stainless steel.50 5/6" AL aluminum.0 ¼" 50FF AL aluminum.40 /" OC carbon steel.55 OS stainless steel.55 ½" 500FF AL aluminum.40 4" BR brass 4.0 MI malleable iron.80 OC carbon steel 6.0 OS stainless steel 6.80 " 0FF AL aluminum.50 59/6" BR brass 8.50 MI balleable iron 7.50 OC carbon steel 8.60 OS stainless steel /8" " 0FF AL aluminum 4.00 BR brass.0 59/" MI malleable iron " 40FF AL aluminum /8" Swivels are shipped standard with the following components: BunaN for pressure seals and dust seals Carbon steel for ball bearings 0 Dixon

Single Plane ORing Style 0 50# ASA Flange x 50# ASA Flange Oring

60 " 0FGFG OS stainless steel 6.60 87/" AL aluminum 7.

31 Single Plane ORing Style 0 50# ASA Flange x 50# ASA Flange Oring Swivel Joints A " 0FGFG OC carbon steel /" OC carbon steel.60 ½" 500FGFG OS stainless steel.60 8/6" AL aluminum 8/6" OC carbon steel 6.60 " 0FGFG OS stainless steel /" AL aluminum /8" OC carbon steel 0.60 " 0FGFG OS stainless steel /8" AL aluminum /" 4" 40FGFG AL aluminum.00 5/6" Dixon

Single Plane ORing Style 0 Female NPT x Female NPT A " 0FF OC carbon steel.

6 57/6" 5/" ½" 500FF AL aluminum.7 BR brass 5. 4/6" " MI malleable iron 4.

BR brass 9.9 6/6" 7/8" MI balleable iron 8.8 OC carbon steel.

4 7/6" 7/8" MI malleable iron.0 4" 40FF AL aluminum 9.

32 Single Plane ORing Style 0 Female NPT x Female NPT A " 0FF OC carbon steel.6 4/" /6" OS stainless steel.0 59/" /6" OC carbon steel 5.0 OS stainless steel /6" 5/" ½" 500FF AL aluminum.7 BR brass 5. 4/6" " MI malleable iron 4.6 OC carbon steel 7.6 OS stainless steel 6. 6/" /4" " 0FF AL aluminum 4. BR brass 9.9 6/6" 7/8" MI balleable iron 8.8 OC carbon steel.4 OS stainless steel. 89/64" 4/6" " 0FF AL aluminum 5. BR brass 5.4 7/6" 7/8" MI malleable iron.0 4" 40FF AL aluminum 9. 9/8" 4/4" B Swivels are shipped standard with the following components: BunaN for pressure seals and dust seals Carbon steel for ball bearings Dixon

90 " 0FGFG OS stainless steel.90 97/8" 5/4" AL aluminum.80 9/6" 65/" 4" 40FGFG AL aluminum 4.

33 Oring Swivel Joints Single Plane ORing Style 0 50# ASA Flange x 50# ASA Flange A " 0FGFG OC carbon steel 6/" /6" OS stainless steel 69/" /6" OC carbon steel ½" 500FGFG OS stainless steel 77/8" 4/6" AL aluminum 7/" 5/" OC carbon steel 0.0 " 0FGFG OS stainless steel 0.0 8/" 4/" AL aluminum 85/8" 59/" OC carbon steel.90 " 0FGFG OS stainless steel.90 97/8" 5/4" AL aluminum.80 9/6" 65/" 4" 40FGFG AL aluminum 4.00 /" 79/" B Tank Truck Flange x Tank Truck Flange A OC carbon steel " 0TFTF OS stainless steel AL aluminum OC carbon steel " 0TFTF OS stainless steel AL aluminum 8/4" 59/6" 4" 40TFTF AL aluminum.00 05/6" 69/6" B Dixon

Single Plane ORing Style 40 Female NPT x Female NPT A B C " 40FF OC

4 459/64" /6" 4/8" OS stainless steel 559/64" /6" 5/8" OC carbon

BR brass 6.8 6/8" " 6" MI malleable iron 6. OC carbon steel 8.

6/6" 7/8" 5/4" MI balleable iron 9. OC carbon steel 7.

9 BR brass 8.0 8/4" 7/8" 7/4" MI malleable iron 5.

34 Single Plane ORing Style 40 Female NPT x Female NPT A B C " 40FF OC carbon steel /64" /6" 4/8" OS stainless steel 559/64" /6" 5/8" OC carbon steel OS stainless steel 7.0 7/6" 5/" 65/6" ½" 5040FF AL aluminum. BR brass 6.8 6/8" " 6" MI malleable iron 6. OC carbon steel 8.5 OS stainless steel 77/" /4" 6/" " 40FF AL aluminum 4.5 BR brass. 6/6" 7/8" 5/4" MI balleable iron 9. OC carbon steel 7.7 OS stainless steel 0/8" 4/6" 95/8" " 40FF AL aluminum 5.9 BR brass 8.0 8/4" 7/8" 7/4" MI malleable iron 5.0 4" 440FF AL aluminum 0. 05/8" 4/4" 9/" Swivels are shipped standard with the following components: BunaN for pressure seals and dust seals Carbon steel for ball bearings 4 Dixon

Single Plane ORing Style 40 50# ASA Flange x 50# ASA Flange Oring Swivel Joints A B C " 40FGFG OC carbon steel 8.90 459/64" /6" 6/8" OS stainless steel 8.

0 77/" 4/" 9" AL aluminum 6/6" 59/" 09/6" OC carbon steel 9.70 " 40FGFG OS stainless steel 9.70 0/8" 5/4" /" AL aluminum.

35 Single Plane ORing Style 40 50# ASA Flange x 50# ASA Flange Oring Swivel Joints A B C " 40FGFG OC carbon steel /64" /6" 6/8" OS stainless steel /64" /6" 7/8" OC carbon steel ½" 5040FGFG OS stainless steel 7/6" 4/6" 9/8" AL aluminum 6/8" 5/" 5/6" OC carbon steel.0 " 40FGFG OS stainless steel.0 77/" 4/" 9" AL aluminum 6/6" 59/" 09/6" OC carbon steel 9.70 " 40FGFG OS stainless steel /8" 5/4" /" AL aluminum.00 8/4" 65/8" /4" 4" 440FGFG AL aluminum 05/8" 79/6" 5/8" Tank Truck Flange x Tank Truck Flange A B C OC carbon steel " 40TFTF OS stainless steel AL aluminum OC carbon steel " 40TFTF OS stainless steel AL aluminum 7. 8/4" 59/6" /8" 4" 440TFTF AL aluminum /8" 69/6" /8" Dixon

Double Plane ORing Style 50 Female NPT x Female NPT A B C " 50FF

00 7/6" 5/" 89/" AL aluminum 6/8" " 7/6" OC carbon steel OS

90 6/6" 7/8" 9/6" MI balleable iron.0 " 50FF OC carbon steel.

40 MI malleable iron.50 8/4" 7/8" 09/" 4" 450FF AL aluminum 5.

36 Double Plane ORing Style 50 Female NPT x Female NPT A B C " 50FF OC carbon steel /64" /6" 6/" OS stainless steel /64" /6" 79/" OC carbon steel 9.00 ½" 5050FF OS stainless steel /6" 5/" 89/" AL aluminum 6/8" " 7/6" OC carbon steel OS stainless steel 77/" /4" 99/" " 50FF AL aluminum 7.80 BR brass /6" 7/8" 9/6" MI balleable iron.0 " 50FF OC carbon steel.80 OS stainless steel.80 0/8" 4/6" 6/64" AL aluminum 9.40 MI malleable iron.50 8/4" 7/8" 09/" 4" 450FF AL aluminum /8" 4/4" 7/8" Swivels are shipped standard with the following components: BunaN for pressure seals and dust seals Carbon steel for ball bearings 6 Dixon

Double Plane ORing Style 50 50# ASA Flange x 50# ASA Flange Oring Swivel Joints A B C " 50FGFG OC carbon steel 459/64" /6" 99/64" OS stainless steel 559/64" /6" 09/64" OC carbon steel ½" 5050FGFG OS

37 Double Plane ORing Style 50 50# ASA Flange x 50# ASA Flange Oring Swivel Joints A B C " 50FGFG OC carbon steel 459/64" /6" 99/64" OS stainless steel 559/64" /6" 09/64" OC carbon steel ½" 5050FGFG OS stainless steel 7/6" 4/6" 9/6" AL aluminum 6/8" 5/" /8" OC carbon steel " 50FGFG OS stainless steel 77/" 4/" 7/" AL aluminum 6/6" 59/" 9/" OC carbon steel " 50FGFG OS stainless steel 0/8" 5/4" 55/8" AL aluminum 8/4" 65/" 6/" 4" 450FGFG AL aluminum 05/8" 79/" 99/6" Swivels are shipped standard with the following components: BunaN for pressure seals and dust seals Carbon steel for ball bearings Dixon

Double Plane ORing Style 60 Female NPT x Female NPT "

00 4/" OS stainless steel 49/" OC carbon steel ½" 5060FF

70 57/6" AL aluminum 4/6" OC carbon steel.

40 OS stainless steel 89/64" AL aluminum 8.

38 Double Plane ORing Style 60 Female NPT x Female NPT " 60FF OC carbon steel /" OS stainless steel 49/" OC carbon steel ½" 5060FF OS stainless steel /6" AL aluminum 4/6" OC carbon steel.0 OS stainless steel.0 6/" " 60FF AL aluminum 6.90 BR brass /" MI balleable iron " 60FF OC carbon steel 9.40 OS stainless steel 89/64" AL aluminum 8.60 MI malleable iron /" 4" 460FF AL aluminum.40 9/8" A Swivels are shipped standard with the following components: BunaN for pressure seals and dust seals Carbon steel for ball bearings 8 Dixon

Double Plane ORing Style 60 50# ASA Flange x 50# ASA Flange Oring Swivel Joints " 60FGFG OC carbon steel 67/64" OS stainless steel 69/64" OC carbon steel ½" 5060FGFG OS stainless steel 77/8" AL

39 Double Plane ORing Style 60 50# ASA Flange x 50# ASA Flange Oring Swivel Joints " 60FGFG OC carbon steel 67/64" OS stainless steel 69/64" OC carbon steel ½" 5060FGFG OS stainless steel 77/8" AL aluminum 7/" OC carbon steel 4.90 " 60FGFG OS stainless steel /" AL aluminum 85/8" OC carbon steel " 60FGFG OS stainless steel 97/8" AL aluminum 95/8" 4" 460FGFG AL aluminum /" A Swivels are shipped standard with the following components: BunaN for pressure seals and dust seals Carbon steel for ball bearings Dixon

Triple Plane ORing Style 70 Female NPT x Female NPT A "

60 459/64" /6" OS stainless steel 559/64" /6" OC carbon

80 BR brass 6/6" 7/8" MI balleable iron OC carbon steel "

40 Triple Plane ORing Style 70 Female NPT x Female NPT A " 70FF OC carbon steel /64" /6" OS stainless steel 559/64" /6" OC carbon steel ½" 5070FF OS stainless steel 7/6" 5/" AL aluminum.80 6/8" " OC carbon steel 6.40 OS stainless steel 77/" /4" " 70FF AL aluminum 7.80 BR brass 6/6" 7/8" MI balleable iron OC carbon steel " 70FF OS stainless steel 0/8" 4/6" AL aluminum 0.0 8/4" 7/8" 4" 470FF AL aluminum /8" 4/4" B Swivels are shipped standard with the following components: BunaN for pressure seals and dust seals Carbon steel for ball bearings 40 Dixon

Triple Plane ORing Style 70 50# ASA Flange x 50# ASA Flange Oring Swivel Joints A " 70FGFG OC

steel 7/6" 4/6" AL aluminum 6/8" 5/" OC carbon steel " 70FGFG OS stainless steel 77/" 4/" AL

65/" 4" 470FGFG AL aluminum 05/8" 79/" B Swivels are shipped standard with the following

41 Triple Plane ORing Style 70 50# ASA Flange x 50# ASA Flange Oring Swivel Joints A " 70FGFG OC carbon steel 459/64" OS stainless steel 559/64" /6" OC carbon steel ½" 5070FGFG OS stainless steel 7/6" 4/6" AL aluminum 6/8" 5/" OC carbon steel " 70FGFG OS stainless steel 77/" 4/" AL aluminum 6/6" 59/" OC carbon steel " 70FGFG OS stainless steel 0/8" 5/4" AL aluminum 8/4" 65/" 4" 470FGFG AL aluminum 05/8" 79/" B Swivels are shipped standard with the following components: BunaN for pressure seals and dust seals Carbon steel for ball bearings Dixon

Corrosion Resistance of Coupling Material Caution The following data has been compiled from generally available sources and should not be relied upon without consulting and following the specific

42 Corrosion Resistance of Coupling Material Caution The following data has been compiled from generally available sources and should not be relied upon without consulting and following the specific recommendations of the manufacturer regarding particular coupling materials. Ratings Metal excellent good fair not recommended _ contact factory NonMetal A acceptable not recommended _ contact factory Gasket/Seal Material T PTFE V FKM E EPDM, EPR N Neoprene B Buna N Note:. Ratings given are based at 70 F. Chemical compatibility varies greatly with temperature. For applications at temperatures other than 70 F, contact the factory for recommendations.. Gasket / seal materials are not necessarily listed in order of preference.. Chemical resistance of a material does not necessarily indicate the suitability of a fitting in a given application due to variables such as improper clamp and coupling application, special hose construction, gasket material, etc. Special caution should be taken when handling hazardous materials. 4 Dixon

43 Swivel Joints AGENT Aluminum Brass Malleable Iron Carbon Steel Stainless Steel, 6 Seal Material Acetate Solvents (Crude) Acetate Solvents (Pure) Acetic Acid (80%) Acetic Acid (50%) Acetic Acid (0%) Acetic Acid (0%) Acetic Anhydride Acetone Acetylene Alcohols Amyl Alcohol Benzyl Alcohol Butyl Alcohol Diacetone Alcohol Ethyl Alcohol Hexyl Alcohol Isobutyl Alcohol Isopropyl Alcohol Methyl Alcohol (Methanol) Octyl Alcohol Propyl Alcohol Aluminum Aluminum Chloride (Aqu.) Aluminum Fluoride (Sat.) Aluminum Nitrate (Sat.) Aluminum Potassium Sulfate (Alum) Aluminum Sulfate (Sat.) Ammonia Ammonia Anhydrous Ammonia Gas Ammonia Nitrate Ammonium Ammonium Biflouride Ammonium Carbonate (Sat.) Ammonium Casenate Ammonium Chloride (Sat.) Ammonium Hydroxide (Sat.) Ammonium Nitrate Ammonium Phosphate (040%) Ammonium Sulfate (040%) Aniline Arsenic Acid Asphalt Barium Barium Carbonate (Sat.) Barium Chloride (Sat.) Barium Hydroxide (Sat.) Barium Sulfate Barium Sulfide Beer Benzaldehyde Benzene, Benzol Benzine Benzoic Acid Black Liquor Bleach (.5% Active Chlorine) Borax Boric Acid Brine Acid Bromic acid Bromine Liquid Butadiene, Butylene Butane Butyl Acetate Butyric Acid Dixon Ratings given are based at 70 F T T TNB TE B TEVN TE TENB TENB TENB TEVB TENB TE N TEVN TEVN T 4

44 AGENT Calcium Calcium Bisulfate Calcium Bisulfide Calcium Bisulfite Calcium Bromide Calcium Carbonate Calcium Chloride (Sat.) Calcium Hydroxide (Sat.) Calcium Hypochlorite (Sat.) Carbon Carbon Bisulfide Carbon Dioxide (Dry) Carbon Dioxide (Wet) Carbon Disulfide Carbon Monoxide Carbon Tetrachloride Carbonic Acid Castor Oil Caustic Potash Cellosolves Chlorine (Liquid) Chloroform Chlorosulfonic Acid Clorox (Bleach, 5.5% CL) Chromic Acid (50%) Citric Acid Coke Oven Gas Copper Copper Chloride Copper Cyanide Copper Sulfate Crysylic Acid (Conc.) Cyclohexane Detergents Dextrose Diesel Fuels Diethylamine Disodium Phosphate Ethers Ethyl Ethyl Acetate Ethyl Chloride Ethylene Ethylene Chloride Ethylene Dichloride Ethylene Glycol Ethylene Oxide Fatty Acids Ferric Ferric Chloride Ferric Hydroxide Ferric Nitrate (050%) Ferric Sulfate Ferrous Ferrous Chloride (Sat.) Ferrous Sulfate Fluboric Acid Formaldehyde (50%) Formic Acid (Anhyd.) Freon Freon Freon Freon Fruit Juices Fuel Oil 44 Dixon Aluminum Brass Malleable Iron Carbon Steel Ratings given are based at 70 F Stainless Steel, 6 Seal Material T B T TEVB TEV TENB TENB TE T TEVB TEVN TEV B B TN TEV TB T TEVB T TEN TEVN TN

45 Swivel Joints AGENT Aluminum Brass Malleable Iron Carbon Steel Stainless Steel, 6 Seal Material Furfural Gasoline Refined Gasoline Sour Gasoline Gelatin Glucose Glue Glycerine Glycols Green Liquor Heptane Hexane Hydrobromic Acid (50%) Hydrobromic Acid (0%) Hydrochloric Acid (0%) Hydrochloric Acid (8%) Hydrocyanic Acid Hydrofluosilicic Acid (050%) Hydrogen Hydrogen Peroxide (50%) Hydrogen Sulfide (Aqu.) Hydrogen Chloride (Dry Gas) Hydrogen Gas Hypochlorous Acid Iodine Isopropyl Ether Jet Fuel (JP4, JP5) Kerosene Ketones Lactic Acid (5%) Lactic Acid (80%) Lard Oil Lead Lead Acetate Lead Chloride Lead Sulfate Lime Sulphur Linoleic Acid Linseed Oil Lubricants (Oil) Magnesium Magnesium Carbonate Magnesium Chloride Magnesium Hydroxide Magnesium Nitrate Magnesium Oxide Magnesium Sulfate Maleic Acid Mercuric Mercuric Chloride Mercuric Cyanide Mercury Methane Methanol Methyl Methyl Bromide Methyl Ethyl Ketone Methyl Isobutyl Ketone Methyl Methacrylate Methylene Chloride Milk Mineral Oil Muriatic Acid Napthalene Naptha Dixon Ratings given are based at 70 F TEN TEV TEV TEVN TEVN TEV TE TEVN TEV TEV T T TEVN TEVN B TENB TEVN B TEV TEVB TEVB TENB TE T T T B 45

46 AGENT Nickel Nickel Chloride Nickel Sulfate Nitric Nitric Acid (00%) Nitric Acid (50%) Nitric Acid (0%) Nitrobenzene Oils Castor Oil Coconut Oil Corn Oil Cotton Seed Oil Fuel Oil Linseed Oil Mineral Oil Silicon Oil Vegetable Oil Oleic Acid Oleum Oxalic Acid (Sat.) Oxygen Palmitic Acid (Sat.) Paraffin Perchloroethylene Petrolatum Phenol (Carbolic Acid) Phosphoric Acid Phosphoric Acid (550%) Phosphoric Acid (5085%) Photographic Solutions Phthalic Anhydride Picric Acid Plating Solutions Brass Plating Solution Cadmium Plating Solution Chrome 40% Plating Solution Copper (Cyanide) Plating Solution Gold Plating Solution Iron PLating Solution Lead Plating Solution Nickel Plating Solution Silver Plating Solution Tin Plating Solution Zinc Plating Solution Potassium Potassium Acetate Potassium Bicarbonate (0%) Potassium Carbonate (50%) Potaasium Chlorate (0%) Potassium Chloride (0%) Potassium Chromate (0%) Potassium Cyanide Solution (0%) Potassium Dichromate (0%) Potassium Hydroxide (90%) Potassium Nitrate (80%) Potassium Permanganate (0%) Potassium Sulfate (0%) Propane Propylene Gylcol Propylene Oxide (90%) Pyridine Pyrogallic Acid Silver Nitrate Soap Solutions 46 Dixon Aluminum Brass Malleable Iron Carbon Steel Ratings given are based at 70 F Stainless Steel, 6 Seal Material T B TEVB TB TEV B TEVN TEV TEV TEVN TEVB TEVB TEVB TEVB TENB TEVN B TE T

47 Swivel Joints AGENT Aluminum Brass Malleable Iron Carbon Steel Stainless Steel, 6 Seal Material Sodium Sodium Acetate Sodium Bicarbonate (0%) Sodium Bisulfate Sodium Bisulfite Sodium Borate Sodium Perborate (0%) Sodium Carbonate Sodium Chlorate (50%) Sodium Cyanide Sodium Dichromate Sodium Hydroxide (70%) Sodium Hydroxide (50%) Sodium Hydroxide (0%) Sodium Chloride (0%) Sodium Hypochlorite Sodium Metaphosphate Sodium Nitrate (40%) Sodium Perborate (0%) Sodium Peroxide (0%) Sodium Silicate Sodium Sulfate Sodium Sulfide (50%) Sodium Thiosulphate Stannic Chloride Stannous Chloride Steam Stearic Acid Stoddard's Solvent Sugar Liquors (Cane) Sugar Liquors (Beet) Sulfate Liquors Sulfite Liquors Sulfur Chloride Sulfur Dioxide (Dry) Sulfur Trioxide Sulfuric Acid (TO 0%) Sulfuric Acid (00%) Sulfurous Acid Tannic Acid Tanning Liquors Tartaric Acid Titanium Tetrachloride Toluene Tetrahydrofuran Tomato Juice Trichloroethylene Triethanolamine Triethylamine Trisodium Phosphate (0%) Turpentine Urea (50%) Urine Vinegar Water Acid (Mine) Water (Distilled) Water (Sea) Whiskey White Liquor (Pulp) Wine ylene Zinc Zinc Chloride Zinc Nitrate Zinc Sulfate (50%) Ratings given are based at 70 F Dixon TEN TE TENB TENB TENB TEV TENB B TE TEV B T TEVN B B TEVN 47

Dixon, founded in 96, is a premier manufacturer and

swivels, and other fluid transfer and control products.

products for numerous industries including petroleum

processing, food & beverage, steel, fire protection,

Dixon s strategic objective is to create solutions that

available. dixonvalve.com Customer Service: 877.96.

48 Dixon, founded in 96, is a premier manufacturer and supplier of hose couplings, valves, drydisconnects, swivels, and other fluid transfer and control products. The company s global reach includes a wide range of products for numerous industries including petroleum exploration, refining, transportation, chemical processing, food & beverage, steel, fire protection, construction, mining and manufacturing. Dixon s strategic objective is to create solutions that make products safer, leakfree, longer lasting, and always available. dixonvalve.com Customer Service: Dixon Valve 800 High Street, Chestertown, MD 60 Fax: Customer Service Facebook 05 DVCC Printed in the USA SWLJNT5_web

Swivel Joints. dixonvalve.com Customer Service:

Swivel Joints. dixonvalve.com Customer Service: NUFACTURING QUALITY SERVICE MANUFACTURING QUALITY SERVICE MANUFACTURING QUALITY SERVICE MANUFACTU Swivel Joints dixonvalve.com Customer Service: 877.96.4966 About Us Dixon entered the industrial swivel