Swivel Joints. dixonvalve.com Customer Service:

Transcription

1 NUFCTURING QULITY SERVICE MNUFCTURING QULITY SERVICE MNUFCTURING QULITY SERVICE MNUFCTU Swivel Joints dixonvalve.com Customer Service:

2 Swivel Joints Safety Dixon's couplings and retention devices are designed to work safely for their intended use. The selection of the proper hose, coupling and retention device, and the proper application of the coupling to the hose are of utmost importance. Users must consider the size, temperature, application, media, pressure and hose and coupling manufacturer's recommendations when selecting the proper hose assembly components. Dixon recommends that all hose assemblies be tested in accordance with the Rubber Manufacturers ssociation's recommendations and be inspected regularly (before each use) to ensure that they are not damaged or have become loose. Visit RM.org for more information. Where safety devices are integral to the coupling, they must be working and utilized. The use of supplementary safety devices such as safety clips or safety cables are recommended. If any problem is detected, couplings must be removed from service immediately. Dixon is available to consult, train and recommend the proper selection and application of all fittings we sell. We strongly recommend that distributors and end users make use of Dixon's Testing and Recommendation Services. Call or click dixonvalve.com to learn more. Features and Benefits Full 60 rotational movement offers maximum flexibility Wide spacing between dual ball bearing raceways ensures greater loadbearing capacity Precisionmachined design ensures alignment and years of troublefree service n Oring dust seal protects the ball races and seal chamber from outside elements. The radius elbow design ensures a smooth flow pattern ll weights and dimensions are approximate and subject to change without notice. Consult the factory when critical. Color Coding System for Seal Identification: BU BunaN red stripe VI Viton green stripe TF PTFE natural EP Ethylene Propylene green and white stripes O Ring Style Swivels Swivel Styles The Oring pressure seal ensures a leakproof seal and smoother rotation at lower torques than multiple designs. Springloaded PTFE pressure seals are available through Carbon steel and stainless steel Oring type swivels provide greater strength and corrosion resistance when needed for lower torque applications V Ring Style Swivels The springloaded triple Vring sealing system ensures a leakproof seal and an extended seal life compared to the conventional single Oring design. The 8" carbon steel swivels are manufactured from carbon steel with flame hardened dual raceways for greater load bearing capacity and longer life. Stainless steel swivels are manufactured in 6 grade stainless steel for superior corrosion resistance. Dixon

3 Swivel Joints Flange Bolt Tightening Sequence (use appropriate gaskets and bolts) 4 Bolt 8 Bolt Bolt of 50 lb. S Steel Flanges Nominal Pipe Flange O.D. Thickness * O.D. of Raised Face Diameter of Bolt Circle Number of Bolts Diameter of Bolt Holes Diameter of Bolts " /" " /" 5" 6" 8" 0" " 4/" 5" 6" 7" 7/" 9" 0" " /" 6" 9" 9/6" /6" / 7/8" 5/6" 5/6" 5/6" " /8" /6" / " 7/8" 5/8" 4/8" 5" 6/6" 75/6" 8/" 05/8" / 5" /8" 7/8" 4/ 5/" 6" 7/" 8/" 9/" / 4/ 7" /8" 5/8" / / / / 7/8" 7/8" 7/8" " " /" /" 5/8" 5/8" 5/8" 5/8" / / / 7/8" 7/8" * /6" raised face is included in the thickness Threaded pplications Flange Diagrams Welded pplications threaded flange with raised face slipon flange with raised face weld neck flange with raised face Floating pplications (flange free to swivel) slipon flange with raised face Dixon lapjoint flange

4 Swivel Joints Operation / Service Dixon swivels are recommended for use at the following maximum NonShock Cold Working Pressures (NSCWP) provided in PSI, at ambient temperatures (70 F) " ¼" ½" " 6" 8" (VRing) Carbon Steel CS (ORing) Carbon Steel OC (VRing) Stainless Steel SS (ORing) Stainless Steel OS luminum L Brass BR Malleable Iron MI When using flanged ends, the pressure rating will be reduced to coincide with that of the flange being used. Carbon steel and stainless steel 50# flanges are recommended for use at 75 maximum PSI at ambient temperature (70 F). Lubrication should be performed periodically, depending on service and operation conditions. Twice yearly is normally sufficient. ll dimensions are approximate. Where critical, consult the factory. Options vailable: ny combination of end configurations lternative seal materials: Viton, PTFE, Ethylene Propylene and FD Buna lternative ball bearing materials: 440 stainless steel and 6 stainless steel lternative grease materials: FD approved/food grade and silicone Drain holes or counter balance lugs Swivels for oxygen service, steam service and submerged service can be specifically designed for unique applications (special order) Use with Hose The use of swivel joints to compensate for twist in hose (i.e. Style 0 or Style 60) should be carefully reviewed, since the hose must be sufficiently stiff to generate the torque needed to actuate the swivel before it kinks. In many installations, the twist is caused by lateral movement that can be eliminated by the use of a swivel joint that addresses the lateral movement (i.e. Style 40 or Style 0). Where this is not possible, the use of hose swivels may be a solution. Hose swivels are generally nonball bearing designs that require less torque to initiate rotation; however, hose swivels are not designed for load bearing service. Some hoses are unable to generate even the low torque required for a hose swivel, many metal hoses fall into this group. Other hoses are stiff enough to turn almost any swivel, many armored hoses fall into this group. Pricing ll pricing available upon request. Please contact factory for pricing and proper equipment selection for the correct application. Every swivel joint is built to order, due to this, they are not generally returnable. Return requests will be reviewed on a case by case basis. Restocking charges will be applicable on all returns. Restocking charges include 5%, plus any additional costs incurred. 4 Dixon

5 To select the proper swivel joint you need the following information: Ordering Information Swivels Swivel Joints : End Configuration: Maximum Working Pressure: Style (shape): : Temperature Range: Product being handled: (if a chemical, please advise concentration) If for constant rotation, advise RPM: If for suction service, advise maximum vacuum in inches of Mercury (Hg): Our factory sales and engineering staff will be happy to help you evaluate your swivel application. Please call Example swivel size [] swivel style 0 [B] end configuration F [C] end configuration F [C] swivel material CS [D] pressure seal 0 [E] (BunaN standard) dust seal 0 [F] (BunaN standard) retainers (VRing ONLY) [G] ball bearings 0 [H] (carbon steel standard) grease 0 [I] [] [B] Style (see diagrams) [C] End Connections W Weld End F Female End FG 50# S Flange TF Tank Truck Flange PF 00# S flange (not available on aluminum) [D] CS (VRing) carbon steel SS (VRing) stainless steel L aluminum BR brass MI malleable iron OC (ORing) carbon steel OS (ORing) stainless steel Code # [E] Pressure Seal [F] Dust Seal [G] Retainers [H] Ball Bearings [I] Grease 0 BunaN (standard) BunaN (standard) No retainers (Oring swivels) Carbon steel (standard) Standard Viton Viton luminum (standard in CS Vring) 440 grade stainless FD approved/ Food grade PTFE PTFE (standard in SS Vring) 6 grade stainless Silicone (required with EPR seals) Ethylene Propylene (requires silicone grease) Ethylene Propylene (requires silicone grease) 4 FD Buna (Oring only) FD Buna The swivel should be packed so that the surfaces coming in contact with the fluid being handled are compatible with that fluid. In the case of the use of the swivel in submerged service this would include the dust seals and ball bearings. Dixon always recommends the use of stainless steel ball bearings when building a swivel for submerged service since the standard carbon steal bearings could rust together making it impossible to disassemble the swivel and possibly affecting its operation. Dixon

6 Vring Parts Identification List. body. sleeve. ball bearings 4. seal retainer 5. Vring (pressure) seal 6. spring retainer 7. spring 8. ball retainer screw 9. grease fitting 0. Oring (dust) seal weld end shown Other available end configurations: Male NPT thread 00# S flange Tank car thread with gasket TTM tank truck flange British pipe thread Special Options 45 Swivel assembly (style 0 shown) Swivel assembly with counterweight lug (style 50 shown) 6 Dixon

7 Typical Vring Swivel pplications Loading rm Vring Swivel Joints Floating Roof Drain Floating Suction Dixon

8 Vring Swivel Seal Replacement Procedure Remove the ball retainer screws. dd a sufficient amount of solvent into each raceway to flush out the lubricant. Rotate the sleeve, catching the balls as they fall out. When all the balls have been removed, the body and sleeve can be separated. Discard old seals. Thoroughly clean the body, sleeve retainer, spring retainer and springs. * 5Insert sleeve into body, compressing swivel joint together until ball races of body and sleeve are in alignment (do not rotate either unit while compressing). Care should be taken to avoid pinching or scoring of V rings. Drop balls into raceway holes, rotating the sleeve slowly as you load. To make space for all the balls, insert a screw driver into the raceway while continuing to rotate the sleeve in one direction (be careful not to damage the threads). This will cause the balls to jam up, making room for the remaining balls. Now reverse the rotation of the sleeve and insert the remaining balls. Lubricate the body unit with a Moly lubricant or equivalent. 6Reinstall ball retainer screws until tight. If this interferes with the smooth rotation of the ball bearings, then back off /8 /4 turn. thread locking sealant is recommended to prevent screws from backing off. fter pressure testing, the unit is ready for installation. Place the assembled spring retainer unit (spring end first) into the body. Place the set of V rings onto the spring retainer. Be sure V rings are installed with the sealing lips facing toward the retainer. Lubricate the body and seals with a Moly lubricant or equivalent. * The last coil of the springs has been upset (OD slightly larger). When upset end is inserted into the holes provided in the spring retainer, the springs remain secure. 4Set the dust seal into O ring groove on the sleeve. Place the seal retainer on the sleeve with the grooved end facing the V rings. Lubricate the sleeve with grease. Caution: Body and sleeve are matched during manufacturing. Do not mix components with other units. 8 Dixon

9 Optional Seals for VRing Swivels Vring Swivel Joints VRing Pressure Seals VRing pressure seal material; Viton, PTFE (SS), PTFE (CS and L) which includes changing to PTFE retainers, EPR and BunaN. BunaN is standard. VRing pressure seals are available in '', '', 4'', 6'' and 8" ORing Dust Seals Dust seal material: Viton, EPR and BunaN. BunaN is standard. ORing dust seals are available in '', '', 4'', 6'' and 8'' Carbon steel Vring swivels come standard with aluminum retainers. These must be compatible with the material flowing through the swivel. PTFE retainers are available. Rebuild Kits for VRing Swivels VRing Swivel Rebuild Kit each kit contains Vrings in the material indicated, BunaN dust seal, ball retainer screws, grease plug and 0 ball bearings. The spring retainer and seal retainer are not included in the Vring swivel rebuild kits. " 6" 8" Buna Viton PTFE EPR RKVBU RKVBU 4RKVBU 6RKVBU 8RKVBU RKVVI RKVVI 4RKVVI 6RKVVI 8RKVVI RKVTF RKVTF 4RKVTF 6RKVTF 8RKVTF RKVEP RKVEP 4RKVEP 6RKVEP 8RKVEP Note: ll rebuild kits are per plane of rotation material: 440 stainless steel or 6 stainless steel ball bearings are available in '', '', 4'', 6'' and 8'' Optional Ball Bearings for VRing Swivels Replacement Ball Bearings for VRing Swivels Qty Per Plane of Rotation Carbon Steel (standard) 440 Stainless Steel 6 Stainless Steel " 6" 8" CSB 8CSB 8CSB CSB 4CSB 8SSB 8SSB 8SSB SSB 4SSB 8SSB6 8SSB6 8SSB6 SSB6 4SSB6 Dixon

10 Single Plane V Ring Style 0 Weld end x Weld end " 6" 8" 0WW 0WW 40WW 60WW 80WW CS carbon steel SS stainless steel CS carbon steel SS stainless steel CS carbon steel SS stainless steel CS carbon steel SS stainless steel L aluminum CS carbon steel SS stainless steel L aluminum /6" 5/ 7" 8/8" 85/8" Caution: Weld end swivel joints should be completely disassembled prior to welding, so as not to damage the seals. Care should be taken to avoid distortion of seal and ball race diameters. Swivels are shipped standard with the following components: BunaN for pressure seals and dust seals Carbon steel for ball bearings luminum for retainers in carbon steel swivels PTFE for retainers in stainless steel swivels 0 Dixon

11 Single Plane V Ring Style 0 Female NPT x Female NPT Vring Swivel Joints " 6" 8" 0FF 0FF 40FF 60FF 80FF CS carbon steel SS stainless steel CS carbon steel SS stainless steel CS carbon steel SS stainless steel CS carbon steel SS stainless steel L aluminum CS carbon steel SS stainless steel L aluminum /6" 0" / /8" 7/8" 50# S Flange x 50# S Flange " 6" 8" 0FGFG 0FGFG 40FGFG 60FGFG 80FGFG CS carbon steel SS stainless steel CS carbon steel SS stainless steel CS carbon steel SS stainless steel CS carbon steel SS stainless steel L aluminum CS carbon steel SS stainless steel L aluminum /6" / 5/8" 65/8" Dixon

12 Single Plane V Ring Style 0 Female NPT x Female NPT " 6" 0FF 0FF 40FF 60FF CS carbon steel SS stainless steel CS carbon steel SS stainless steel CS carbon steel SS stainless steel CS carbon steel SS stainless steel L aluminum B 9" /6" 07/8" 5/8" /8" 6/8" 6/ 77/8" Swivels are shipped standard with the following components: BunaN for pressure seals and dust seals Carbon steel for ball bearings luminum for retainers in carbon steel swivels PTFE for retainers in stainless steel swivels Dixon

13 Single Plane V Ring Style 0 0# S Flange x 50# S Flange Vring Swivel Joints " 6" 8" 0FGFG 0FGFG 40FGFG 60FGFG 80FGFG CS carbon steel SS stainless steel CS carbon steel SS stainless steel CS carbon steel SS stainless steel CS carbon steel SS stainless steel L aluminum CS carbon steel SS stainless steel L aluminum B 9/6" 4/" /" 5/ 7" 77/8" 9/" 05/8" " Swivels are shipped standard with the following components: BunaN for pressure seals and dust seals Carbon steel for ball bearings luminum for retainers in carbon steel swivels PTFE for retainers in stainless steel swivels Dixon

14 Single Plane V Ring Style 40 Female NPT x Female NPT B C " 6" 40FF 40FF 440FF 640FF CS carbon steel SS stainless steel CS carbon steel SS stainless steel CS carbon steel SS stainless steel CS carbon steel SS stainless steel L aluminum /6" /6" / 5/8" 5" 6/8" 0/8" 77/8" 7/8" 0/ / 5/ Swivels are shipped standard with the following components: BunaN for pressure seals and dust seals Carbon steel for ball bearings luminum for retainers in carbon steel swivels PTFE for retainers in stainless steel swivels 4 Dixon

15 Single Plane V Ring Style 40 50# S Flange x 50# S Flange Vring Swivel Joints B C " 6" 8" 40FGFG 40FGFG 440FGFG 640FGFG 840FGFG CS carbon steel SS stainless steel CS carbon steel SS stainless steel CS carbon steel SS stainless steel CS carbon steel SS stainless steel L aluminum CS carbon steel SS stainless steel L aluminum /6" 4/" / 5/ 5" 7" 0/8" 9/" 45/8" " 9" /" 9" Swivels are shipped standard with the following components: BunaN for pressure seals and dust seals Carbon steel for ball bearings luminum for retainers in carbon steel swivels PTFE for retainers in stainless steel swivels Dixon

16 Double Plane V Ring Style 50 Female NPT x Female NPT B C " 6" 50FF 50FF 450FF 650FF CS carbon steel SS stainless steel CS carbon steel SS stainless steel CS carbon steel SS stainless steel CS carbon steel SS stainless steel L aluminum /6" /6" / 5/8" 5" 6/8" 0/8" 77/8" /6" 6" 9/ 4/8" Swivels are shipped standard with the following components: BunaN for pressure seals and dust seals Carbon steel for ball bearings luminum for retainers in carbon steel swivels PTFE for retainers in stainless steel swivels 6 Dixon

17 Double Plane V Ring Style 50 50# S Flange x 50# S Flange Vring Swivel Joints B C " 6" 8" 50FGFG 50FGFG 450FGFG 650FGFG 850FGFG CS carbon steel SS stainless steel CS carbon steel SS stainless steel CS carbon steel SS stainless steel CS carbon steel SS stainless steel L aluminum CS carbon steel SS stainless steel L aluminum /6" 4/" / 5/ 5" 7" 0/8" 9/" 45/8" " 45/6" 7/ " 7/8" 5/8" Swivels are shipped standard with the following components: BunaN for pressure seals and dust seals Carbon steel for ball bearings luminum for retainers in carbon steel swivels PTFE for retainers in stainless steel swivels Dixon

18 Double Plane V Ring Style 60 Female NPT x Female NPT " 6" 60FF 60FF 460FF 660FF CS carbon steel SS stainless steel CS carbon steel SS stainless steel CS carbon steel SS stainless steel CS carbon steel SS stainless steel L aluminum " 07/8" /8" 6/ Swivels are shipped standard with the following components: BunaN for pressure seals and dust seals Carbon steel for ball bearings luminum for retainers in carbon steel swivels PTFE for retainers in stainless steel swivels 8 Dixon

19 Double Plane V Ring Style 60 50# S Flange x 50# S Flange Vring Swivel Joints " 6" 8" 60FGFG 60FGFG 460FGFG 660FGFG 860FGFG CS carbon steel SS stainless steel CS carbon steel SS stainless steel CS carbon steel SS stainless steel CS carbon steel SS stainless steel L aluminum CS carbon steel SS stainless steel L aluminum /6" /" 77/8" 05/8" Swivels are shipped standard with the following components: BunaN for pressure seals and dust seals Carbon steel for ball bearings luminum for retainers in carbon steel swivels PTFE for retainers in stainless steel swivels Dixon

20 Double Plane V Ring Style 70 Female NPT x Female NPT " 6" 70FF 70FF 470FF 670FF CS carbon steel SS stainless steel CS carbon steel SS stainless steel CS carbon steel SS stainless steel CS carbon steel SS stainless steel L aluminum B 95/6" /6 / 5/8" 5" 6/8" 0/8" 77/8" Swivels are shipped standard with the following components: Buna N for pressure seals and dust seals Carbon steel for ball bearings luminum for retainers in carbon steel swivels PTFE for retainers in stainless steel swivels 0 Dixon

21 Double Plane V Ring Style 70 50# S Flange x 50# S Flange Vring Swivel Joints " 6" 8" 70FGFG 70FGFG 470FGFG 670FGFG 870FGFG CS carbon steel SS stainless steel CS carbon steel SS stainless steel CS carbon steel SS stainless steel CS carbon steel SS stainless steel L aluminum CS carbon steel SS stainless steel L aluminum B 95/6" 4/" / 5/ 5" 7" 0/8" 9/" 45/8" " Swivels are shipped standard with the following components: BunaN for pressure seals and dust seals Carbon steel for ball bearings luminum for retainers in carbon steel swivels PTFE for retainers in stainless steel swivels Dixon

22 Triple Plane V Ring Style 80 Female NPT x Female NPT B C " 6" 80FF 80FF 480FF 680FF CS carbon steel SS stainless steel CS carbon steel SS stainless steel CS carbon steel SS stainless steel CS carbon steel SS stainless steel L aluminum /6" 99/6" / 07/8" 5" /8" 0/8" 6/ /6" 5./8" 6/8" 77/8" Swivels are shipped standard with the following components: BunaN for pressure seals and dust seals Carbon steel for ball bearings luminum for retainers in carbon steel swivels PTFE for retainers in stainless steel swivels Dixon

23 Triple Plane V Ring Style 80 50# S Flange x 50# S Flange Vring Swivel Joints B C " 6" 8" 80FGFG 80FGFG 480FGFG 680FGFG 880FGFG CS carbon steel SS stainless steel CS carbon steel SS stainless steel CS carbon steel SS stainless steel CS carbon steel SS stainless steel L aluminum CS carbon steel SS stainless steel L aluminum /6" 9/6" / /" 5" 0/8" 77/8" 45/8" 05/8" 4/" 5/ 7" 9/" " Swivels are shipped standard with the following components: BunaN for pressure seals and dust seals Carbon steel for ball bearings luminum for retainers in carbon steel swivels PTFE for retainers in stainless steel swivels Dixon

24 Triple Plane V Ring Style 0 Female NPT x Female NPT " 6" 0FF 0FF 40FF 60FF CS carbon steel SS stainless steel CS carbon steel SS stainless steel CS carbon steel SS stainless steel CS carbon steel SS stainless steel L aluminum B 95/6" 9" / 07/8" 5" /8" 0/8" 6/ Swivels are shipped standard with the following components: BunaN for pressure seals and dust seals Carbon steel for ball bearings luminum for retainers in carbon steel swivels PTFE for retainers in stainless steel swivels 4 Dixon

25 Triple Plane V Ring Style 0 50# S Flange x 50# S Flange Vring Swivel Joints " 6" 8" 0FGFG 0FGFG 40FGFG 60FGFG 80FGFG CS carbon steel SS stainless steel CS carbon steel SS stainless steel CS carbon steel SS stainless steel CS carbon steel SS stainless steel L aluminum CS carbon steel SS stainless steel L aluminum B 95/6" 9/6" / /" 5" 0/8" 77/8" 45/8" 05/8" Swivels are shipped standard with the following components: BunaN for pressure seals and dust seals Carbon steel for ball bearings luminum for retainers in carbon steel swivels PTFE for retainers in stainless steel swivels Dixon

26 Oring Parts Identification List ) Oring (dust) seal ) ball retainer screw ) Oring (pressure) seal 4) grease fitting 5) ball bearings female NPT shown Other available end configurations: Tank car thread with gasket TTM tank truck flange SpringLoaded PTFE Pressure Seal for Oring Swivels Cross Sectional View of Seal (for use in sizes " ) Special Options for Oring Swivels Swivel with Handle (style 40 shown) Tank Car Swivel (style 0 shown) 6 Dixon Swivel ssembly with Counterweight Lug (style 40 shown)

27 Typical pplications for Oring Swivels Loading rm Oring Swivel Joints Hose Loaders Note: style 60 may also be used in this application Dixon

28 Oring Swivel Seal Replacement Procedure Note: Instructions not for assembly with springloaded PTFE pressure seal. Consult the factory. Remove the ball retainer screws. dd a sufficient amount of solvent into each raceway to flush out the lubricant. Rotate the sleeve, catching the balls as they fall out. When all the balls have been removed, the body and sleeve can be separated. Discard old seals. Thoroughly clean the body and sleeve. 4Insert the sleeve into the body, slowly rotate the sleeve while inserting into the body. Install the new O rings on the sleeve, dust seal to the rear, product (pressure) seal up front. 5When the sleeve is fully inserted, feed the ball bearings into the raceways while rotating the sleeve. To make space for all the balls, insert a screw driver into the raceway, while continuing to rotate the sleeve in one direction (be careful not to damage the threads). This will cause the balls to jam up, making room for the remaining balls. Now reverse rotation of sleeve and insert the remaining balls. Lubricate the body and the sleeve with grease. 8 Dixon Reinstall ball retainer screws until tight. If this interferes with the smooth rotation of the ball bearings, then back off /8 /4 turn. thread locking sealant is recommended to prevent screws from backing off. fter pressure testing, the unit is ready for installation. Caution: Body and sleeve are matched during manufacturing. Do not mix components with other units.

29 Oring Swivel Joints Optional Seals for ORing Swivels ORing Pressure Seals ORing Pressure seal material: Viton, Springloaded PTFE, EPR, Food Grade Buna and BunaN. BunaN is standard. ORing pressure seals are availble in '', ¼ and ½", '', '' and 4'' ORing Dust Seals Dust seal material: Viton, EPR and BunaN. BunaN is standard. ORing dust seals are available in '', ¼, ½", '', '' and 4''. Note: When a change of seals is ordered, only the pressure seal is changed unless specifically requested by the customer. Rebuild Kits for ORing Swivels ORing Swivel Rebuild Kit each kit contains ORing (pressure seal) in the material indicated, BunaN dust seal, ball retainer screws, grease plug and 0 ball bearings. " ¼ and ½" " Buna Viton PTFE EPR RKOBU 50RKOBU RKOBU RKOBU 4RKOBU RKOVI 50RKOVI RKOVI RKOVI 4RKOVI RKOTF 50RKOTF RKOTF RKOTF 50RKOEP RKOEP RKOEP 4RKOEP Note: ll rebuild kits are per plane of rotation material: 440 stainless steel or 6 stainless steel ball bearings are offered in '', ¼",½", '', '' and 4'' Optional Ball Bearings for ORing Swivels Replacement Ball Bearings for ORing Swivels Qty Per Plane of Rotation Carbon Steel (Standard) 440 Stainless Steel 6 Stainless Steel " ¼ and ½" " CSB 4CSB 8CSB 8CSB 8CSB 4SSB 4SSB 8SSB 8SSB 8SSB 4SSB6 4SSB6 8SSB6 8SSB6 8SSB6 Dixon

30 Single Plane O Ring Style 0 Female NPT x Female NPT " ¼" ½" " 0FF 50FF 500FF 0FF 0FF 40FF OC carbon steel OS stainless steel L aluminum L aluminum OC carbon steel OS stainless steel L aluminum BR brass MI malleable iron OC carbon steel OS stainless steel L aluminum BR brass MI balleable iron OC carbon steel OS stainless steel L aluminum BR brass MI malleable iron L aluminum /6" 5/6" / 59/6" 59/6" 57/8" 59/ 75/8" Swivels are shipped standard with the following components: BunaN for pressure seals and dust seals Carbon steel for ball bearings 0 Dixon

31 Single Plane O Ring Style 0 50# S Flange x 50# S Flange Oring Swivel Joints " ½" " 0FGFG 500FGFG 0FGFG 0FGFG 40FGFG OC carbon steel OC carbon steel OS stainless steel L aluminum OC carbon steel OS stainless steel L aluminum OC carbon steel OS stainless steel L aluminum L aluminum / 8/6" 8/6" 87/ 0/8" 95/8" 5/ 5/6" Dixon

32 Single Plane O Ring Style 0 Female NPT x Female NPT B " ½" " 0FF 500FF 0FF 0FF 40FF OC carbon steel OS stainless steel OC carbon steel OS stainless steel L aluminum BR brass MI malleable iron OC carbon steel OS stainless steel L aluminum BR brass MI malleable iron OC carbon steel OS stainless steel L aluminum BR brass MI malleable iron L aluminum / 59/ 57/6" 4/6" 6/ 6/6" 89/6 7/6" /6" /6" 5/ / 7/8" 4/6" 7/8" 9/8" 4/ Swivels are shipped standard with the following components: BunaN for pressure seals and dust seals Carbon steel for ball bearings Dixon

33 Oring Swivel Joints Single Plane O Ring Style 0 50# S Flange x 50# S Flange B " ½" " 0FGFG 500FGFG 0FGFG 0FGFG 40FGFG OC carbon steel OS stainless steel OC carbon steel OS stainless steel L aluminum OC carbon steel OS stainless steel L aluminum OC carbon steel OS stainless steel L aluminum L aluminum / 69/ 77/8" /6" /6" 7/ 5/ 8/ 85/8" 97/8" 4/6" 4/" 59/ 5/ 9/6" 65/ / 79/ Tank Truck Flange x Tank Truck Flange " 0TFTF 0TFTF 40TFTF OC carbon steel OS stainless steel L aluminum OC carbon steel OS stainless steel L aluminum L aluminum.00 B 8/ 05/6" 59/6" 69/6" Dixon

34 Single Plane O Ring Style 40 Female NPT x Female NPT B C " ½" " 40FF 5040FF 40FF 40FF 440FF OC carbon steel OS stainless steel OC carbon steel OS stainless steel L aluminum BR brass MI malleable iron OC carbon steel OS stainless steel L aluminum BR brass MI malleable iron OC carbon steel OS stainless steel L aluminum BR brass MI malleable iron L aluminum /6 559/6 7/6" 6/8" 77/ 6/6" 0/8" 8/ /6" /6" 5/ / 7/8" 4/6" 7/8" 4/8" 5/8" 65/6" 6" 6/" 5/ 95/8" 7/ 05/8" 4/ 9/" Swivels are shipped standard with the following components: BunaN for pressure seals and dust seals Carbon steel for ball bearings 4 Dixon

35 Single Plane O Ring Style 40 50# S Flange x 50# S Flange Oring Swivel Joints B C " ½" " 40FGFG 5040FGFG 40FGFG 40FGFG 440FGFG OC carbon steel OS stainless steel OC carbon steel OS stainless steel L aluminum OC carbon steel OS stainless steel L aluminum OC carbon steel OS stainless steel L aluminum L aluminum /6 559/6 7/6" 6/8" 77/ 6/6" 0/8" /6" /6" 4/6" 5/ 4/" 59/ 5/ 6/8" 7/8" 9/8" 5/6" 9" 09/6" /" 8/ 65/8" / 05/8" 79/6" 5/8" Tank Truck Flange x Tank Truck Flange B C " 40TFTF 40TFTF 440TFTF OC carbon steel OS stainless steel L aluminum OC carbon steel OS stainless steel L aluminum L aluminum / 59/6" /8" 05/8" 69/6" /8" Dixon

36 Double Plane O Ring Style 50 Female NPT x Female NPT " ½" " 50FF 5050FF 50FF 50FF 450FF OC carbon steel OS stainless steel OC carbon steel OS stainless steel L aluminum OC carbon steel OS stainless steel L aluminum BR brass MI malleable iron OC carbon steel OS stainless steel L aluminum MI malleable iron L aluminum /6 559/6 7/6" 6/8" 77/ 6/6" 0/8" 8/ B /6" /6" 5/ / 7/8" 4/6" 7/8" C 6/ 79/ 89/ 7/6" 99/ 9/6" 6/6 09/ 05/8" 4/ 7/8" Swivels are shipped standard with the following components: BunaN for pressure seals and dust seals Carbon steel for ball bearings 6 Dixon

37 Double Plane O Ring Style 50 50# S Flange x 50# S Flange Oring Swivel Joints B C " ½" " 50FGFG 5050FGFG 50FGFG 50FGFG 450FGFG OC carbon steel OS stainless steel OC carbon steel OS stainless steel L aluminum OC carbon steel OS stainless steel L aluminum OC carbon steel OS stainless steel L aluminum L aluminum 459/6 559/6 7/6" 6/8" 77/ 6/6" 0/8" /6" /6" 4/6" 5/ 4/" 59/ 5/ 99/6 09/6 9/6" /8" 7/ 9/ 55/8" 8/ 65/ 6/ 05/8" 79/ 99/6 Swivels are shipped standard with the following components: BunaN for pressure seals and dust seals Carbon steel for ball bearings Dixon

38 Double Plane O Ring Style 60 Female NPT x Female NPT " ½" " 60FF 5060FF 60FF 60FF 460FF OC carbon steel OS stainless steel OC carbon steel OS stainless steel L aluminum OC carbon steel OS stainless steel L aluminum BR brass MI malleable iron OC carbon steel OS stainless steel L aluminum MI malleable iron L aluminum / 49/ 57/6" 4/6" 6/ 67/ 89/6 7/ 9/8" Swivels are shipped standard with the following components: BunaN for pressure seals and dust seals Carbon steel for ball bearings 8 Dixon

39 Double Plane O Ring Style 60 50# S Flange x 50# S Flange Oring Swivel Joints " ½" " 60FGFG 560FGFG 60FGFG 60FGFG 460FGFG OC carbon steel OS stainless steel OC carbon steel OS stainless steel L aluminum OC carbon steel OS stainless steel L aluminum OC carbon steel OS stainless steel L aluminum L aluminum /6 69/6 77/8" 7/ 8/ 85/8" 97/8" 95/8" / Swivels are shipped standard with the following components: BunaN for pressure seals and dust seals Carbon steel for ball bearings Dixon

40 Triple Plane O Ring Style 70 Female NPT x Female NPT B " ½" " 70FF 5070FF 70FF 70FF 470FF OC carbon steel OS stainless steel OC carbon steel OS stainless steel L aluminum OC carbon steel OS stainless steel L aluminum BR brass MI malleable iron OC carbon steel OS stainless steel L aluminum L aluminum /6 559/6 7/6" 6/8" 77/ 6/6" 0/8" /6" /6" 5/ / 7/8" 4/6" 8/ 7/8" 05/8" 4/ Swivels are shipped standard with the following components: BunaN for pressure seals and dust seals Carbon steel for ball bearings 40 Dixon

41 Triple Plane O Ring Style 70 50# S Flange x 50# S Flange Oring Swivel Joints " ½" " 70FGFG 570FGFG 70FGFG 70FGFG 470FGFG OC carbon steel OS stainless steel OC carbon steel OS stainless steel L aluminum OC carbon steel OS stainless steel L aluminum OC carbon steel OS stainless steel L aluminum L aluminum 459/6 559/6 7/6" 6/8" 77/ 6/6" 0/8" B /6" 4/6" 5/ 4/" 59/ 5/ 8/ 65/ 05/8" 79/ Swivels are shipped standard with the following components: BunaN for pressure seals and dust seals Carbon steel for ball bearings Dixon

42 Swivel Joints Trademarks PTFE is a registered trademark of E.I. dupont Nemours and Company. Viton is a registered trademark of DuPont Dow Elastomers. Corrosion Resistance of Coupling Caution The following data has been compiled from generally available sources and should not be relied upon without consulting and following the specific recommendations of the manufacturer regarding particular coupling materials. Ratings Metal excellent good fair not recommended _ contact factory NonMetal acceptable not recommended _ contact factory Gasket/Seal T PTFE V Viton E EPDM, EPR N Neoprene B Buna N Note:. Ratings given are based at 70 F. Chemical compatibility varies greatly with temperature. For applications at temperatures other than 70 F, contact the factory for recommendations.. Gasket / seal materials are not necessarily listed in order of preference.. Chemical resistance of a material does not necessarily indicate the suitability of a fitting in a given application due to variables such as improper clamp and coupling application, special hose construction, gasket material, etc. Special caution should be taken when handling hazardous materials. 4 Dixon

43 Swivel Joints GENT luminum Brass Malleable Iron Carbon Steel Stainless Steel, 6 Seal cetate Solvents (Crude) cetate Solvents (Pure) cetic cid (80%) cetic cid (50%) cetic cid (0%) cetic cid (0%) cetic nhydride cetone cetylene lcohols myl lcohol Benzyl lcohol Butyl lcohol Diacetone lcohol Ethyl lcohol Hexyl lcohol Isobutyl lcohol Isopropyl lcohol Methyl lcohol (Methanol) Octyl lcohol Propyl lcohol luminum luminum Chloride (qu.) luminum Fluoride (Sat.) luminum Nitrate (Sat.) luminum Potassium Sulfate (lum) luminum Sulfate (Sat.) mmonia mmonia nhydrous mmonia Gas mmonia Nitrate mmonium mmonium Biflouride mmonium Carbonate (Sat.) mmonium Casenate mmonium Chloride (Sat.) mmonium Hydroxide (Sat.) mmonium Nitrate mmonium Phosphate (040%) mmonium Sulfate (040%) niline rsenic cid sphalt Barium Barium Carbonate (Sat.) Barium Chloride (Sat.) Barium Hydroxide (Sat.) Barium Sulfate Barium Sulfide Beer Benzaldehyde Benzene, Benzol Benzine Benzoic cid Black Liquor Bleach (.5% ctive Chlorine) Borax Boric cid Brine cid Bromic acid Bromine Liquid Butadiene, Butylene Butane Butyl cetate Butyric cid Dixon Ratings given are based at 70 F T T TNB TE B TEVN TE TENB TENB TENB TEVB TENB TE N TEVN TEVN T 4

44 Swivel Joints GENT Calcium Calcium Bisulfate Calcium Bisulfide Calcium Bisulfite Calcium Bromide Calcium Carbonate Calcium Chloride (Sat.) Calcium Hydroxide (Sat.) Calcium Hypochlorite (Sat.) Carbon Carbon Bisulfide Carbon Dioxide (Dry) Carbon Dioxide (Wet) Carbon Disulfide Carbon Monoxide Carbon Tetrachloride Carbonic cid Castor Oil Caustic Potash Cellosolves Chlorine (Liquid) Chloroform Chlorosulfonic cid Clorox (Bleach, 5.5% CL) Chromic cid (50%) Citric cid Coke Oven Gas Copper Copper Chloride Copper Cyanide Copper Sulfate Crysylic cid (Conc.) Cyclohexane Detergents Dextrose Diesel Fuels Diethylamine Disodium Phosphate Ethers Ethyl Ethyl cetate Ethyl Chloride Ethylene Ethylene Chloride Ethylene Dichloride Ethylene Glycol Ethylene Oxide Fatty cids Ferric Ferric Chloride Ferric Hydroxide Ferric Nitrate (050%) Ferric Sulfate Ferrous Ferrous Chloride (Sat.) Ferrous Sulfate Fluboric cid Formaldehyde (50%) Formic cid (nhyd.) Freon Freon Freon Freon Fruit Juices Fuel Oil 44 Dixon luminum Brass G Malleable Iron Carbon Steel Ratings given are based at 70 F Stainless Steel, 6 Seal T B T TEVB TEV TENB TENB TE T TEVB TEVN TEV B B TN TEV TB T TEVB T TEN TEVN TN

45 Swivel Joints GENT luminum Brass Malleable Iron Carbon Steel Stainless Steel, 6 Seal Furfural Gasoline Refined Gasoline Sour Gasoline Gelatin Glucose Glue Glycerine Glycols Green Liquor Heptane Hexane Hydrobromic cid (50%) Hydrobromic cid (0%) Hydrochloric cid (0%) Hydrochloric cid (8%) Hydrocyanic cid Hydrofluosilicic cid (050%) Hydrogen Hydrogen Peroxide (50%) Hydrogen Sulfide (qu.) Hydrogen Chloride (Dry Gas) Hydrogen Gas Hypochlorous cid Iodine Isopropyl Ether Jet Fuel (JP4, JP5) Kerosene Ketones Lactic cid (5%) Lactic cid (80%) Lard Oil Lead Lead cetate Lead Chloride Lead Sulfate Lime Sulphur Linoleic cid Linseed Oil Lubricants (Oil) Magnesium Magnesium Carbonate Magnesium Chloride Magnesium Hydroxide Magnesium Nitrate Magnesium Oxide Magnesium Sulfate Maleic cid Mercuric Mercuric Chloride Mercuric Cyanide Mercury Methane Methanol Methyl Methyl Bromide Methyl Ethyl Ketone Methyl Isobutyl Ketone Methyl Methacrylate Methylene Chloride Milk Mineral Oil Muriatic cid Napthalene Naptha Dixon Ratings given are based at 70 F TEN TEV TEV TEVN TEVN TEV TE TEVN TEV TEV T T TEVN TEVN B TENB TEVN B TEV TEVB TEVB TENB TE T T T B 45

46 Swivel Joints GENT Nickel Nickel Chloride Nickel Sulfate Nitric Nitric cid (00%) Nitric cid (50%) Nitric cid (0%) Nitrobenzene Oils Castor Oil Coconut Oil Corn Oil Cotton Seed Oil Fuel Oil Linseed Oil Mineral Oil Silicon Oil Vegetable Oil Oleic cid Oleum Oxalic cid (Sat.) Oxygen Palmitic cid (Sat.) Paraffin Perchloroethylene Petrolatum Phenol (Carbolic cid) Phosphoric cid Phosphoric cid (550%) Phosphoric cid (5085%) Photographic Solutions Phthalic nhydride Picric cid Plating Solutions Brass Plating Solution Cadmium Plating Solution Chrome 40% Plating Solution Copper (Cyanide) Plating Solution Gold Plating Solution Iron PLating Solution Lead Plating Solution Nickel Plating Solution Silver Plating Solution Tin Plating Solution Zinc Plating Solution Potassium Potassium cetate Potassium Bicarbonate (0%) Potassium Carbonate (50%) Potaasium Chlorate (0%) Potassium Chloride (0%) Potassium Chromate (0%) Potassium Cyanide Solution (0%) Potassium Dichromate (0%) Potassium Hydroxide (90%) Potassium Nitrate (80%) Potassium Permanganate (0%) Potassium Sulfate (0%) Propane Propylene Gylcol Propylene Oxide (90%) Pyridine Pyrogallic cid Silver Nitrate Soap Solutions 46 Dixon luminum Brass Malleable Iron Carbon Steel Ratings given are based at 70 F Stainless Steel, 6 Seal T B TEVB TB TEV B TEVN TEV TEV TEVN TEVB TEVB TEVB TEVB TENB TEVN B TE T

47 Swivel Joints GENT luminum Brass Malleable Iron Carbon Steel Stainless Steel, 6 Seal Sodium Sodium cetate Sodium Bicarbonate (0%) Sodium Bisulfate Sodium Bisulfite Sodium Borate Sodium Perborate (0%) Sodium Carbonate Sodium Chlorate (50%) Sodium Cyanide Sodium Dichromate Sodium Hydroxide (70%) Sodium Hydroxide (50%) Sodium Hydroxide (0%) Sodium Chloride (0%) Sodium Hypochlorite Sodium Metaphosphate Sodium Nitrate (40%) Sodium Perborate (0%) Sodium Peroxide (0%) Sodium Silicate Sodium Sulfate Sodium Sulfide (50%) Sodium Thiosulphate Stannic Chloride Stannous Chloride Steam Stearic cid Stoddard's Solvent Sugar Liquors (Cane) Sugar Liquors (Beet) Sulfate Liquors Sulfite Liquors Sulfur Chloride Sulfur Dioxide (Dry) Sulfur Trioxide Sulfuric cid (TO 0%) Sulfuric cid (00%) Sulfurous cid Tannic cid Tanning Liquors Tartaric cid Titanium Tetrachloride Toluene Tetrahydrofuran Tomato Juice Trichloroethylene Triethanolamine Triethylamine Trisodium Phosphate (0%) Turpentine Urea (50%) Urine Vinegar Water cid (Mine) Water (Distilled) Water (Sea) Whiskey White Liquor (Pulp) Wine ylene Zinc Zinc Chloride Zinc Nitrate Zinc Sulfate (50%) Ratings given are based at 70 F Dixon TEN TE TENB TENB TENB TEV TENB B TE TEV B T TEVN B B TEVN 47

48 Dixon is recognized as the premier manufacturer and supplier of hose fittings and accessories spanning a wide range of industrial uses. Dixon s range includes products for food, dairy processing, beverage and brewery, mobile tankers, mining, construction, chemical processing, petroleum, oilfields, refining and manufacturing. dixonvalve.com Customer Service: Dixon Valve 800 High Street, Chestertown, MD 60 Fax: DVCC Printed in the US SWIVELJOINT_07_web