AWS B2.1/B2.1M-BMG:2009. Base Metal Grouping for Welding Procedure and Performance Qualification
|
|
- Silas Daniel
- 6 years ago
- Views:
Transcription
1 Base Metal Grouping for Welding Procedure and Performance Qualification
2 Base Metal Grouping for Welding Procedure and Performance Qualification Prepared by the American Welding Society (AWS) B2 Committee on Procedure and Performance Qualification Under the Direction of the AWS Technical Activities Committee Approved by the AWS Board of Directors Abstract This document provides the AWS base metal grouping for welding procedure and performance qualification and is identical to Annex D of AWS B2.1/B2.1M:2009, Specification for Welding Procedure and Performance Qualification. 550 N.W. LeJeune Road, Miami, FL 33126
3 Table of Contents Page No. Personnel...v 1. Scope...1 Annex D Base Metal Grouping...3 Table List of Tables Page No. D.1 Listing of Base Metal Specifications Ferrous Alloys...4 D.1 Listing of Base Metal Specifications Nonferrous Alloys...42 D.2 M-Number Listing of Base Metals Ferrous Alloys...66 D.2 M-Number Listing of Base Metals Nonferrous Alloys D.3 Listing of Base Metal Specifications Iron Castings ix
4 Base Metal Grouping for Welding Procedure and Performance Qualification 1. Scope This publication is an extract of AWS B2.1, Specification for Welding Procedure and Performance Qualification, and is identical to Annex D, Base Metal Grouping, in the 2009 edition of that standard. This publication supersedes AWS B2.1-BMG:2005. Underlined text or a vertical line in the margin indicates a revision from the 2005 edition. This publication may be referred to by other codes and standards that have welding procedure and performance requirements in order to avoid duplication of materials tables in those publications. Base metals and filler metals have been grouped into categories that will minimize the number of qualification tests required. Substitution of one base metal or filler metal for another, even when within the allowable rules, should only be made after an evaluation of the factors involved. For some materials, additional tests may be required. Materials not listed require separate qualification. 1
5 Annex D (Normative) Base Metal Grouping This annex is part of AWS B2.1/B2.1M:2009, Specification for Welding Procedure and Performance Qualification, and includes mandatory elements for use with this standard. D1. Base Metal Specifications Table D.1 indexes ASTM, ABS, API, AISI, AS, AS/NZS, CSA, AMS, ISO, NACE, and MSS base metals in numerical order to provide ease of reference when determining into what grouping a particular base metal specification falls. Table D.2 groups base metals for welding procedure and performance qualification on the basis of mechanical properties, chemical composition, and metallurgical compatibility to minimize the number of welding qualification where this can logically be done. D2. Material Number (M-Number) Groupings Base metal has been divided into general categories, e.g., Material Numbers (M-Numbers) 1, 1A, 3, 3A, 4, 4A, etc., and further divided into groups within each general category. The category grouping does not imply that base metals may be substituted for other base metals within the same Material Number (M-Number) without consideration for weldability. D3. Iron Castings Specifications Base metal specifications for iron castings are divided into D11.2 groups. 3
6 Standard Base Metal Specification Table D.1 List of Base Metal Specifications Ferrous Alloys Material Number Group Number Type, Grade, or Alloy Designation (Continued) UNS Number Product Form Steel and Steel Alloys ASTM A Grade B K03100 Rivets ASTM A A36 K02595 Plate ASTM A A36 K02596 Plate & Bars ASTM A A36 K02597 Plate & Bars ASTM A A36 K02598 Plate & Bars ASTM A A36 K02599 Plate & Bars ASTM A A36 K02600 Shapes ASTM A Type E, Grade A K02504 Resistance Welded Pipe ASTM A Type E, Grade B K03005 Resistance Welded Pipe ASTM A Type F, Grade A Furnace Welded Pipe ASTM A Type S, Grade A K02504 Seamless Pipe ASTM A Type S, Grade B K03005 Seamless Pipe ASTM A K03504 Pipe Flanges ASTM A Grade A K02501 Seamless Pipe ASTM A Grade B K03006 Seamless Pipe ASTM A Grade C K03501 Seamless Pipe ASTM A Grade 1015 CW G10150 Bar ASTM A Grade 1018 CW G10180 Bar ASTM A Grade 1020 CW G10200 Bar ASTM A Grade A K02300 Structural ASTM A Grade B K02102 Structural ASTM A Grade CS K01601 Structural ASTM A Grade D K02101 Structural ASTM A Grade DS K01601 Structural ASTM A Grade E K01801 Structural ASTM A Grade AH32 K11846 Structural ASTM A Grade AH36 K11852 Structural ASTM A Grade DH32 K11846 Structural ASTM A Grade DH36 K11852 Structural ASTM A Grade EH32 K11846 Structural ASTM A Grade EH36 K11852 Structural ASTM A A36 Welded Pipe ASTM A A283 A Welded Pipe ASTM A A283 B Welded Pipe ASTM A A283 C K02401 Welded Pipe ASTM A A283 D K02702 Welded Pipe ASTM A A285 A K01700 Welded Pipe ASTM A A285 B K02200 Welded Pipe ASTM A A285 C K02801 Welded Pipe ASTM A Grade A ERW Pipe ASTM A Grade B ERW Pipe ASTM A Grade A Welded Pipe ASTM A Grade B K03003 Welded Pipe 4
Specification for Welding of Tanks, Vessels, and Other Equipment in Sanitary (Hygienic) Applications
An American National Standard Specification for Welding of Tanks, Vessels, and Other Equipment in Sanitary (Hygienic) Applications Key Words Visual examination acceptance criteria, food processing equipment,
More informationAWS A5.14/A5.14M:2009 An American National Standard. Specification for Nickel and Nickel-Alloy Bare Welding Electrodes and Rods
An American National Standard Specification for Nickel and Nickel-Alloy Bare Welding Electrodes and Rods An American National Standard Approved by the American National Standards Institute October 28,
More informationAWS A5.6/A5.6M:2008 An American National Standard. Specification for Copper and Copper-Alloy Electrodes for Shielded Metal Arc Welding
An American National Standard Specification for Copper and Copper-Alloy Electrodes for Shielded Metal Arc Welding An American National Standard Approved by the American National Standards Institute November
More informationAWS A5.16/A5.16M:2007 An American National Standard. Specification for Titanium and Titanium-Alloy Welding Electrodes and Rods
An American National Standard Specification for Titanium and Titanium-Alloy Welding Electrodes and Rods An American National Standard Approved by the American National Standards Institute August 17, 2007
More informationAWS G2.4/G2.4M:2007 An American National Standard. Guide for the Fusion Welding of Titanium and Titanium Alloys
An American National Standard Guide for the Fusion Welding of Titanium and Titanium Alloys An American National Standard Approved by the American National Standards Institute September 20, 2006 Guide for
More informationAWS D8.14M:2008 An American National Standard. Specification for Automotive Weld Quality Arc Welding of Aluminum
An American National Standard Specification for Automotive Weld Quality Arc Welding of Aluminum An American National Standard Approved by the American National Standards Institute June 23, 2008 Specification
More informationAWS D3.9:2010 An American National Standard. Specification for Classification of Weld-Through Paint Primers
An American National Standard Specification for Classification of Weld-Through Paint Primers An American National Standard Approved by the American National Standards Institute February 3, 2010 Specification
More informationAWS A5.9/A5.9M:2006 An American National Standard. Specification for Bare Stainless Steel Welding Electrodes and Rods
An American National Standard Specification for Bare Stainless Steel Welding Electrodes and Rods second printing, August 2007 Key Words Composite electrodes, metal cored bare stainless steel rods, duplex
More informationStructural Welding Code Reinforcing Steel
Key Words Allowable stress, inspection, qualification, reinforcing steel, structural details, welded joint details AWS D1.4/D1.4M:2005 An American National Standard Approved by the American National Standards
More informationSpecification for Welding Earthmoving, Construction, and Agricultural Equipment
Key Words Structural welds, field repair, welding, earthmoving equipment, construction equipment, agricultural equipment AWS D14.3/D14.3M:2005 An American National Standard Approved by American National
More informationAWS A5.29/A5.29M:2010 An American National Standard. Specification for Low-Alloy Steel Electrodes for Flux Cored Arc Welding
An American National Standard Specification for Low-Alloy Steel Electrodes for Flux Cored Arc Welding An American National Standard Approved by the American National Standards Institute September 18, 2009
More informationAWS C6.2/C6.2M:2006 An American National Standard. Specification for Friction Welding of Metals
An American National Standard Friction Welding of Metals An American National Standard Approved by the American National Standards Institute August 8, 2006 Friction Welding of Metals 1st Edition Prepared
More informationASTM Standards B127 B160 B161 B162 B163 B164 B165 B166 B167 B168 B333 B335 B407 B408 B409 B423
ASTM Standards : B127 Specification for Nickel-Copper Alloy (UNS N04400) Plate, Sheet, B160 Specification for Nickel Rod and Bar B161 Specification for Nickel Seamless Pipe and Tube B162 Specification
More informationAWS A4.2M:2006 (ISO 8249:2000 MOD) An American National Standard
An American National Standard Standard Procedures for Calibrating Magnetic Instruments to Measure the Delta Ferrite Content of Austenitic and Duplex Ferritic-Austenitic Stainless Steel Weld Metal Key Words
More informationAWS A5.28/A5.28M:2005 An American National Standard. Specification for Low-Alloy Steel Electrodes and Rods for Gas Shielded Arc Welding
An American National Standard Specification for Low-Alloy Steel Electrodes and Rods for Gas Shielded Arc Welding Key Words Filler metal specifications, low-alloy steel welding electrodes, gas metal arc
More informationSpecification for Welding Procedure and Performance Qualification for Thermoplastics
An American National Standard Approved by the American National Standards Institute February 16, 2006 Specification for Welding Procedure and Performance Qualification for Thermoplastics 1st Edition Prepared
More informationANSI/AWS D An American National Standard. Structural Welding Code Sheet Steel
ANSI/AWS D1.3-98 An American National Standard Structural Welding Code Sheet Steel Key Words Sheet steel, allowable stresses, details of welded joints, workmanship qualification, visual acceptance criteria,
More informationAWS B5.14:2009 An American National Standard. Specification for the Qualification of Welding Sales Representatives
An American National Standard Specification for the Qualification of Welding Sales Representatives An American National Standard Approved by the American National Standards Institute February 2, 2009 Specification
More informationAWS A5.13:2000 An American National Standard. Specification for Surfacing Electrodes for Shielded Metal Arc Welding
An American National Standard Specification for Surfacing Electrodes for Shielded Metal Arc Welding Key Words Hardfacing, weld surfacing, hard surfacing covered electrodes, wear resistance, build-up electrodes,
More informationAWS B1.10M/B1.10:2009 An American National Standard. Guide for the Nondestructive Examination of Welds
An American National Standard Guide for the Nondestructive Examination of Welds An American National Standard Approved by the American National Standards Institute July 1, 2009 Guide for the Nondestructive
More informationRecommended Practices for Surfacing and Reconditioning of Industrial Mill Rolls
Key Words Surfacing, hardfacing, mill rolls, reconditioning AWS D14.7/D14.7M:2005 An American National Standard Approved by the American National Standards Institute October 19, 2005 Recommended Practices
More informationMATERIALS OF CONSTRUCTION FOR PROCESS EQUIPMENT AND PIPING SYSTEMS
MATERIALS OF CONSTRUCTION FOR PROCESS EQUIPMENT AND PIPING SYSTEMS SECTOR / ENGINEERING NON-TECHNICAL & CERTIFIED TRAINING COURSE Appropriate material selection is the cornerstone of pressure equipment
More informationAWS D10.18M/D10.18:2018 An American National Standard. Guide for Welding Ferritic/Austenitic Duplex Stainless Steel Piping and Tubing
An American National Standard Guide for Welding Ferritic/Austenitic Duplex Stainless Steel Piping and Tubing An American National Standard Approved by the American National Standards Institute November
More informationAWS QC1:2007. Standard for AWS Certification of Welding Inspectors
Standard for AWS Certification of Welding Inspectors Standard for AWS Certification of Welding Inspectors Supersedes AWS QC1:2006 Prepared by the American Welding Society (AWS) Subcommittee on Certified
More informationAWS B2.1/B2.1M-BMG:2009. Base Metal Grouping for Welding Procedure and Performance Qualification
Grouping for Welding Procedure and Performance Qualification Grouping for Welding Procedure and Performance Qualification Prepared by the American Welding Society (AWS) B2 Committee on Procedure and Performance
More informationThis document is a preview generated by EVS
INTERNATIONAL STANDARD ISO 13535 First edition 2000-12-15 Petroleum and natural gas industries Drilling and production equipment Hoisting equipment Industries du pétrole et du gaz naturel Équipements de
More informationISO INTERNATIONAL STANDARD. Petroleum and natural gas industries Drilling and well-servicing equipment
INTERNATIONAL STANDARD ISO 14693 First edition 2003-12-15 Petroleum and natural gas industries Drilling and well-servicing equipment Industries du pétrole et du gaz naturel Équipement de forage et d'entretien
More informationAWS B4.0:2007 An American National Standard. Standard Methods for Mechanical Testing of Welds
An American National Standard Standard Methods for Mechanical Testing of Welds An American National Standard Approved by the American National Standards Institute May 2, 2007 Standard Methods for Mechanical
More informationAWS A5.21:2001 An American National Standard. Specification for Bare Electrodes and Rods for Surfacing
An American National Standard Specification for Bare Electrodes and Rods for Surfacing Key Words Weld surfacing, hardfacing bare electrodes and rods, wear resistance, build-up electrodes and rods, cobalt
More informationAWS G1.1M/G1.1:2006 An American National Standard. Guide to Ultrasonic Assembly of Thermoplastics
An American National Standard Guide to Ultrasonic Assembly of Thermoplastics An American National Standard Approved by the American National Standards Institute July 6, 2006 Guide to Ultrasonic Assembly
More informationComparative World. Standards. Handbook of. 5th Edition. John E. Bringas, Editor. Bringas. 5th Edition. Handbook of ASTM INTERNATIONAL DS67D
Bringas Handbook of Comparative World Steel Standards The book editor, John E. Bringas, P.Eng., is president and founder of Codes and Standards Training Institute (CASTI), headquartered in Edmonton, Alberta,
More informationAWS D14.3/D14.3M:2010 An American National Standard. Specification for Welding Earthmoving, Construction, and Agricultural Equipment
An American National Standard Specification for Welding Earthmoving, Construction, and Agricultural Equipment An American National Standard Approved by the American National Standards Institute May 26,
More informationAWS F1.1M:2006 An American National Standard. Method for Sampling Airborne Particulates Generated by Welding and Allied Processes
An American National Standard Method for Sampling Airborne Particulates Generated by Welding and Allied Processes An American National Standard Approved by the American National Standards Institute February
More informationAWS A5.20/A5.20M:2005 An American National Standard. Specification for Carbon Steel Electrodes for Flux Cored Arc Welding
An American National Standard Specification for Carbon Steel Electrodes for Flux Cored Arc Welding Key Words Carbon steel, flux cored electrodes, flux cored arc welding, arc welding AWS A5.20/A5.20M:2005
More information6.1 General. This chapter shall provide requirements for correct use of sprinkler system components and hardware.
NFPA 13-Proposed 2013 Edition Standard for the Installation of Sprinkler Systems TIA Log No.: 1054 Reference: Chapter 6 Comment Closing Date: June 1, 2012 Submitter: Bob Caputo, Fire & Life Safety America
More informationAWS C2.23M/C2.23:2003, NACE No. 12, SSPC-CS An American National Standard
AWS C2.23M/C2.23:2003, NACE No. 12, SSPC-CS 23.00 An American National Standard Specification for the Application of Thermal Spray Coatings (Metallizing) of Aluminum, Zinc, and Their Alloys and Composites
More informationRecommended Practices for Friction Welding
This is a preview of "ANSI/AWS C6.1-89 (R2...". Click here to purchase the full version from the ANSI store. ANSI/AWS C6.1-89 (R2009) An American National Standard Recommended Practices for Friction Welding
More informationCONTENTS. Foreword... xi Statements of Policy... xv Personnel... xvii Summary of Changes... xxvii
CONTENTS Foreword... xi Statements of Policy... xv Personnel... xvii Summary of Changes... xxvii SUBPART 1 STRESS TABLES... 1 Statement of Policy on Information Provided in the Stress Tables... 1 Guideline
More informationWelding Metallurgy Course
Welding Metallurgy Course COURSE OVERVIEW Welding Metallurgy forms an integral part of any business operating in the fabrication and welding environments which sometimes unfortunately commonly become contentious
More informationStandard Specification for Ferritic/Austenitic (Duplex) Stainless Steel Pipe Electric Fusion Welded with Addition of Filler Metal 1
Designation: A 928/A 928M 04 www.tubingchina.com Standard Specification for Ferritic/Austenitic (Duplex) Stainless Steel Pipe Electric Fusion Welded with Addition of Filler Metal 1 This standard is issued
More informationSCOPE OF ACCREDITATION TO ISO/IEC 17025:2005
SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005 ELEMENT MATERIALS TECHNOLOGY BROKEN ARROW LLC 3100 North Hemlock Circle Broken Arrow, OK 74012 Gilbert Monos Phone: 918 258 6066 gil.monos@element.com MECHANICAL
More informationISO INTERNATIONAL STANDARD. Petroleum and natural gas industries Pipeline transportation systems Subsea pipeline valves
INTERNATIONAL STANDARD ISO 14723 Second edition 2009-06-15 Petroleum and natural gas industries Pipeline transportation systems Subsea pipeline valves Industries du pétrole et du gaz naturel Systèmes de
More information+91-8048567308 New Seas Alloys L.L.P http://www.newseasalloys.in/ We are among the pioneers in the industry for manufacturer, exporter, trader and supplier a wide range of Steel Products. The offered products
More informationASTM Standards for Pipe & Fittings
for Pipe & Fittings There are many International Standards for stainless and carbon steel pipes and fittings. The list below is a basic overview of some of these. For more in-depth details of these Standards
More informationISO INTERNATIONAL STANDARD
INTERNATIONAL STANDARD ISO 15590-3 First edition 2004-11-01 Petroleum and natural gas industries Induction bends, fittings and flanges for pipeline transportation systems Part 3: Flanges Industries du
More informationIS First edition
INTERNATIONAL STANDARD IS0 7005-2 First edition 1988-12-15 INTERNATIONAL ORGANIZATION FOR STANDARDIZATION ORGANISATION INTERNATIONALE DE NORMALISATION MEXflYHAPOAHAfl OPTAHMA~Mfl I-IO CTAHflAPTMA~MM Metallic
More informationStructural Channels A-36:20-40 LG. Standard Beams
Floor Plates #/Sq. Ft. 14 Ga. 3.75 12 Ga. 5.25 1/8 6.16 3/16 8.71 1/4 11.26 5/16 13.81 3/8 16.37 Plates #/Sq. Ft. 3/16 7.66 1/4 10.21 5/16 12.76 3/8 15.32 7/16 17.87 1/2 20.42 9/16 22.97 5/8 25.52 3/4
More informationAPI Ballot ID 4798 SC5 TGOCTG. Initial Ballot for Vote & Comment
API Ballot ID 4798 SC5 TGOCTG Work Item Ballot Type (Initial, Commentonly, Reballot) Standard Key 2360 Stress Relief of Cold-worked Ends Initial Ballot for Vote & Comment API 5CT (10 th Edition as basis)
More informationSECTION MISCELLANEOUS METALS
PART 1 GENERAL 1.1 WORK OF THIS SECTION A. Contractor shall provide all labor, materials, equipment and incidentals as shown, specified and required to furnish and install all miscellaneous metal fabrications
More informationNextgen Steel & Alloys
+91-8048109680 Nextgen Steel & Alloys https://www.nextgenoverseas.net/ Our organization is engaged in manufacturers, importers and exporters of an extensive collection of high quality Chemicals, Paper
More informationREFERENCE SYLLABUS. for WELDING EXAMINER & WELDING EXAMINER IN TRAINING CERTIFICATES OF COMPETENCY EXAMINATIONS
WELDING EXAMINER & CERTIFICATES OF COMPETENCY S AB-94 Edition 1, Revision 6, 2016-05-01 This syllabus is being phased out and will be discontinued on April 30, 2018. GENERAL INFORMATION INTRODUCTION: This
More informationGuide to Weldability
Guide to Weldability Carbon and Low Alloy Steels GUIDE TO WELDABILITY: CARBON and LOW ALLOY STEELS How to get the needed results and stay out of trouble Written by Fritz Saenger, Jr., P.E., IWE This publication
More informationSOUTH AFRICAN NATIONAL STANDARD
ISBN 978-0-626-34239-5 SOUTH AFRICAN NATIONAL STANDARD Electric welded low carbon steel pipes for aqueous fluids (large bore) Published by SABS Standards Division 1 Dr Lategan Road Groenkloof Private Bag
More informationGuide to Weldability
Guide to Weldability Carbon and Low Alloy Steels GUIDE TO WELDABILITY: CARBON and LOW ALLOY STEELS How to get the needed results and stay out of trouble Written by Fritz Saenger, Jr., P.E., IWE This publication
More informationThermowells Beware of Imitations
Technical Description TD/TP 001 Issue 1 Thermowells Beware of Imitations Pressure Vessel Codes and Thermowells When specifying and buying thermowells for the process industries there are some points that
More informationAWS G2.1M/G2.1:2012 An American National Standard. Guide for the Joining of Wrought Nickel-Based Alloys
An American National Standard Guide for the Joining of Wrought Nickel-Based Alloys An American National Standard Approved by the American National Standards Institute October 16, 2012 Guide for the Joining
More informationSOUTH AFRICAN NATIONAL STANDARD
ISBN 978-0-626-32329-5 SOUTH AFRICAN NATIONAL STANDARD Firefighting equipment Part 1: Components of underground and above-ground hydrant systems Published by SABS Standards Division 1 Dr Lategan Road Groenkloof
More informationOriginally presented at ASM International, Materials Solutions, Columbus, Ohio in October 2004 Richard Bolton MEng, AMIChemE, Area 42 Consulting
A User s Perspective 2014 Geoff B Associates This document is the property of the course instructor, prepared by the course instructor for exclusive use in the delivery of technical training programmes.
More informationStandard Specification for Carbon Steel Forgings for Piping Applications 1
Addr: 29, 227 Changle Rd., Shanghai, 2000. Tel: 86-2-6470807 Designation: A 0/A 0M 0 Endorsed by Manufacturers Standardization Society of the Valve and Fittings Industry Used in USDOE-NE Standards Standard
More informationStandard Specification for Electric-Fusion (Arc)-Welded Steel Pipe (NPS 4 and Over) 1
Designation: A 39/A 39M 04 Standard Specification for Electric-Fusion (Arc)-Welded Steel Pipe (NPS 4 and Over) This standard is issued under the fixed designation A 39/A 39M; the number immediately following
More information87A-100 SERIES. Stainless Steel ASME Class 150 Flanged Std. Port Ball Valve through 2
87A-100 SERIES Stainless Steel ASME Class 150 Flanged Std. Port Ball Valve - 1.5 through 2 For STANDARDS COMPLIANCE and STANDARD FEATURES refer to page D-3. STANDARD MATERIAL LIST PART MATERIAL 1 Body
More information88A-900 SERIES. Carbon Steel ASME Class 300 Flanged Full Port Ball Valve - 1/2 through 1
88A-900 SERIES Carbon Steel ASME Class 300 Flanged Full Port Ball Valve - 1/2 through 1 For STANDARDS COMPLIANCE and STANDARD FEATURES refer to page D-3. STANDARD MATERIAL LIST PART (1/2 & 3/4 VALVES)
More informationElectronic Master - Printed Copies Uncontrolled - Rosemount Proprietary
Rosemount DP Flow Design & Operations 5601 North 71 st Street Boulder, CO 80301 Tel (303) 530-9600 Fax (303) 530-7064 Technical Documentation for CE Marking Pressure Accessories Manufacturer: Rosemount
More informationSHORING & UNDERPINNING 02250
Subsidiary of Hubbell Power Systems 210 North Allen St. Centralia, MO 65240 Phone: (573) 682-8414 Fax: (573) 682-8660 E-mail: hpscontact@hps.hubbell.com www.abchance.com This MANU-SPEC utilizes the Construction
More informationAustralian/New Zealand Standard
AS/NZS 1665:2004 AS/NZS 1665 Australian/New Zealand Standard Welding of aluminium structures AS/NZS 1665:2004 This Joint Australian/New Zealand Standard was prepared by Joint Technical Committee WD-003,
More informationAmerican Welding Society Nashville Section. Welding Procedure Development
American Welding Society Nashville Section Welding Procedure Development AWS & ASME Welding Procedures Welding Procedure Specification (WPS) Written document that provides direction to the welder for making
More informationUNIFIED FACILITIES GUIDE SPECIFICATIONS
USACE / NAVFAC / AFCEC / NASA UFGS-05 51 33 (May 2010) ----------------------------- Preparing Activity: NAVFAC Superseding UFGS-05 51 33 (August 2008) UNIFIED FACILITIES GUIDE SPECIFICATIONS References
More informationAPI 5L Carbon Steel ERW Pipes & Tubes
------------------------------------------------------------------------------ API 5L Carbon Steel ERW Pipes & Tubes Web: www.rexaltubes.com ------------------------------------------------------------------------------
More informationISO INTERNATIONAL STANDARD. Approval testing of welders Fusion welding Part 4: Nickel and nickel alloys
INTERNATIONAL STANDARD ISO 9606-4 First edition 1999-04-01 Approval testing of welders Fusion welding Part 4: Nickel and nickel alloys Épreuve de qualification des soudeurs Soudage par fusion Partie 4:
More informationSECTION INDUSTRIAL ACCESS / INSPECTION HATCH. A. Industrial Access / Inspection Hatch: Model AH-710
Page 1 of 6 PART 1 - GENERAL SECTION 08370 INDUSTRIAL ACCESS / INSPECTION HATCH 1.1 SECTION INCLUDES A. Industrial Access / Inspection Hatch: Model AH-710 1.2 RELATED SECTIONS A. Section 04810 - Unit Masonry
More informationSECTION STEAM AND CONDENSATE HEATING PIPING
PART 1 GENERAL 1.01 SECTION INCLUDES A. Pipe and pipe fittings. B. Pipe hangers and supports. C. Valves. D. Steam piping system. E. Steam condensate piping system. 1.02 RELATED REQUIREMENTS A. Section
More informationThis document is a preview generated by EVS
INTERNATIONAL STANDARD ISO 17945 First edition 2015-04-15 Petroleum, petrochemical and natural gas industries Metallic materials resistant to sulfide stress cracking in corrosive petroleum refining environments
More informationStandard Specification for Wrought Austenitic Stainless Steel Piping Fittings 1
Designation: A 403/A 403M 06 Standard Specification for Wrought Austenitic Stainless Steel Piping Fittings 1 This standard is issued under the fixed designation A 403/A 403M; the number immediately following
More informationAWS EG2.0:2008. Guide for the Training of Welding Personnel: Level I Entry Welder
Guide for the Training of Welding Personnel: Level I Entry Welder Guide for the Training of Welding Personnel: Level I Entry Welder Supersedes EG2.0-95 Revision Nov. 2008 Prepared by the American Welding
More informationSECTION 8 MATERIAL DATA SHEETS MDS
Title Doc.no. Operator Sec.no. ABB Offshore Systems Piping and Valve Specification 5060 8 ConocoPhillips Norge Project Rev.no. Rev.date Page: Of: Material data sheets 02 11.12.02 1 95 SECTION 8 MATERIAL
More informationISO INTERNATIONAL STANDARD
INTERNATIONAL STANDARD ISO 15590-2 First edition 2003-12-15 Petroleum and natural gas industries Induction bends, fittings and flanges for pipeline transportation systems Part 2: Fittings Industries du
More informationSOUTH AFRICAN NATIONAL STANDARD
ISBN 978-0-626-26268-6 SOUTH AFRICAN NATIONAL STANDARD Construction works Part CS1: Structural steelwork Published by SABS Standards Division 1 Dr Lategan Road Groenkloof Private Bag X191 Pretoria 0001
More informationPED Certified OHSAS 18001:2007 ISO 9001 : 2008 ISO 14001:2004 Govt. Recognized Export House.
PED Certified OHSAS 18001:2007 ISO 9001 : 2008 ISO 14001:2004 Govt. Recognized Export House. SPECIALIST IN: - STAINLESS STEEL, ALLOY STEEL, CARON STEEL SEAMLESS & WELDED PIPES PED APRPOVED FITTINGS & FLANGES
More informationCOMMITTEE CORRESPONDENCE ASME B16-F, FITTINGS
Page 1 of 6 6/14/2016 TO: NOTE FOR RECORD FROM: GUY A. JOLLY SUBJECT: ASME B16.11 HISTORY SPECIFIC TO SW FITTINGS ASA B16.11-1946, 1 ST EDITION, STEEL SOCKET-WELDING FITTINGS 1. This edition did not have
More informationCarbon Steel ASME Class 150 Flanged Std. Port Ball Valve through 2
88A-100 SERIES Carbon Steel ASME Class 150 Flanged Std. Port Ball Valve - 1.5 through 2 For STANDARDS COMPLIANCE and STANDARD FEATURES refer to page D-3. STANDARD MATERIAL LIST PART MATERIAL 1 Body ASTM
More informationAWS B1.10:1999 An American National Standard. Guide for the Nondestructive Examination of Welds
AWS B1.10:1999 An American National Standard Guide for the Nondestructive Examination of Welds Key Words Guide, eddy current examination, magnetic particle examination, nondestructive examination, penetrant
More informationASTM B363-06a Standard Specification for Seamless and Welded Unalloyed
Standard Specification for Seamless and Welded Unalloyed Titanium and Titanium Alloy Welding Fittings 1. Scope :- 1.1 This specification cover fittings intended for general corrosion resisting and elevated
More informationSECTION METAL WELDING
SECTION 05222 - METAL WELDING PART 1 - GENERAL 1.01 SECTION INCLUDES A. Welding Rod/Electrodes B. Stud Shear Connectors C. Shop Welding D. Inspections and Tests by the Contractor E. Inspections and Test
More informationITEM 442 METAL FOR STRUCTURES
ITEM 442 METAL FOR STRUCTURES 442.1. Description. This Item shall govern for all structural steel, high strength bolts, forgings, steel castings, iron castings, wrought iron, bronze, steel pipe and tubing,
More informationDirective 97/23/EC Pressure Equipment
Directive 97/23/EC Pressure Equipment Directive 97/23/EC of the European Parliament and of the Council of 29 May 1997 on the approximation of the laws of the Member States concerning pressure equipment
More informationMETALLIC MATERIAL SPECIFICATION
1. Scope: Page: 1 of 5 1.1. This specification shall be utilized in procurement of AISI 8630 modified steel (UNS G86300) in quenched and tempered condition to 22 HRc maximum hardness. 1.2. These materials
More informationSEAMLESS STEEL LINE PIPE
www.nipponsteel.com SEAMLESS STEEL LINE PIPE Pipes & Tubes 2-6-1 Marunouchi, Chiyoda-ku,Tokyo 100-8071 Japan Tel: +81-3-6867-4111 SEAMLESS STEEL LINE PIPE P103en_01_201904f 2019 CONTENTS INTRODUCTION INTRODUCTION
More informationISO INTERNATIONAL STANDARD. Bolted bonnet steel gate valves for the petroleum, petrochemical and allied industries
INTERNATIONAL STANDARD ISO 10434 Second edition 2004-07-15 Bolted bonnet steel gate valves for the petroleum, petrochemical and allied industries Robinets-vannes en acier à chapeau boulonné pour les industries
More informationCalculation of Heater-tube Thickness in Petroleum Refineries API STANDARD 530 SEVENTH EDITION, APRIL 2015
Calculation of Heater-tube Thickness in Petroleum Refineries API STANDARD 530 SEVENTH EDITION, APRIL 2015 Special Notes API publications necessarily address problems of a general nature. With respect to
More informationDAIMLERCHRYSLER CORPORATION
DAIMLERCHRYSLER CORPORATION No: MS-8580 Material Standard Date Published: 2003-07-30 Category Code: C-3 Change: G EASL Req.: No RESTRICTED: No WROUGHT ALUMINUM AND ALUMINUM ALLOYS 1.0 GENERAL 1.1 Purpose
More informationCRA Clad or Lined Steel Pipe
CRA Clad or Lined Steel Pipe API SPECIFICATION 5LD FOURTH EDITION, MARCH 2015 API MONOGRAM PROGRAM EFFECTIVE DATE: SEPTEMBER 3, 2015 Special Notes API publications necessarily address problems of a general
More informationXI'AN LINKUN STEEL PIPE CO., LTD
Designation: A 358/A 358M 01 An American National Standard Used in USDOE-NE Standards Standard Specification for Electric-Fusion-Welded Austenitic Chromium-Nickel Alloy Steel Pipe for High-Temperature
More informationNIPPON STEEL & SUMITOMO METAL SEAMLESS STEEL LINE PIPE
Pipe Products NIPPON STEEL & SUMITOMO METAL SEAMLESS STEEL LINE PIPE http://www.nssmc.com/ 2-6-1 Marunouchi, Chiyoda-ku,Tokyo 100-8071 Japan Tel: +81-3-6867-4111 SEAMLESS STEEL LINE PIPE P103en_02_201708f
More informationADDENDUM NUMBER 1 PARTICULARS 1.01 DATE: APRIL 6, 2018
PARTICULARS 1.01 DATE: APRIL 6, 2018 ADDENDUM NUMBER 1 1.02 PROJECT: MIDLANDS TECHNICAL COLLEGE NE CAMPUS - CET CHILLER REPLACEMENT 1.03 OWNER'S PROJECT NUMBER: H59-N991-FW 1.04 ENGINEER: GMK ASSOCIATES
More informationSandvik SAF 2205 (Billets)
Datasheet updated 2013 11 28 14:13:21 (supersedes all previous editions) Sandvik SAF 2205 (Billets) Sandvik SAF 2205 is a duplex (austenitic ferritic) stainless steel characterized by: High resistance
More informationAWS A5.35/A5.35M: 2015-AMD1 An American National Standard. Specification for Covered Electrodes for Underwater Wet Shielded Metal Arc Welding
An American National Standard Specification for Covered Electrodes for Underwater Wet Shielded Metal Arc Welding second printing, September 2016 An American National Standard Approved by the American National
More informationA. American Society for Testing and Materials (ASTM):
SECTION 05500 METAL FABRICATIONS PART 1 GENERAL 1.01 SUMMARY A. Related Sections: 1. 03300 - Cast-In-Place Concrete. 2. 03420 - Precast, Prestress Concrete Sections. 3. 04420 - Concrete Unit Masonry. 4.
More informationII Part A Ferrous Material Specifications (Beginning to SA-450)
2010 ASME Boiler and Pressure Vessel Code A N I N T E R N A T I O N A L C O D E II Part A Ferrous Material Specifications (Beginning to SA-450) Materials INTENTIONALLY LEFT BLANK AN INTERNATIONAL CODE
More informationHeubach International
+91-8048549403 Heubach International https://www.indiamart.com/heubach-international/pdf1.html We are leading Exporter, Manufacturer, Wholesaler, Trader, Retailer, Importer, Distributor of Pipe Fitting's
More informationStandard Specification for Structural Steel for Ships 1
Designation: Standard Specification for Structural Steel for Ships 1 This standard is issued under the fixed designation A 131/A 131M; the number immediately following the designation indicates the year
More information