Schedule. Type of Test/ Properties Measured/ Range of Measurement
|
|
- Cuthbert Harrington
- 6 years ago
- Views:
Transcription
1 LABORATORY LOCATION: (PERMANENT LABORATORY) Page: 1 of 9 PROFESSIONAL TESTING SERVICES SDN BHD 7 JALAN MEGA 1 TAMAN PERINDUSTRIAN NUSA CEMERLANG GELANG PATAH, JOHOR MALAYSIA This laboratory accredited under Skim Akreditasi Makmal Malaysia (SAMM) meets the requirements of :2005 General requirements for competence of testing and calibration laboratories. This Malaysian Standards is identical with ISO/IEC 17025:2005 published by the International Organization for Standardization (ISO). Tension Test (a) -Tension on test plates and tubular sections at ambient temperature in the range of 0 kn to 1000 kn with controlled strain rate and crosshead movement, including yield and proof stress. - Ultimate tensile strength of rebar in the range of 0 kn to 1000 kn - Modulus of elasticity on test pieces in the range of 0 kn to 1000 kn ASTM B ASTM E8/E8M 2015a SS 2-Part 1 : 1999 SS 2-Part 2 : 1999 SS 2-Part 3 : 1987 BS EN ISO : 2009 BS 4449+A2 : 2009 SS 18 -Part 1 : 1999 BS EN ISO 4136 : 2012 AS 1391 : 2007 (Amendment 1:2012) AS : 2003 *API (Addendum 1:2014) *NKK Rules Part K Chapter
2 Page: 2 of 9 (Continue) (b) Through Thickness Tensile Test *Lloyd s Pt.2, Chapter 3: Sect *ABS Pt.2, Chapter 1: Sect 1-17:2015 ASTM A770/770M 2003 (reapproved 2012) BS EN : 2004 (c) All Weld Tensile Test (d) Tensile test on cruciform and lapped joints. Hardness Test Vickers Hardness Test in the range of 0.3 kgf to 20 kgf ISO BS EN ISO AS : 2003 BS EN ISO 9018 : 2015 ASTM E E1 ASTM E bE1 BS EN ISO : 2011 BS EN ISO : 2005 AS : 2003 Rockwell Hardness Test ASTM E BS EN ISO : 2015
3 Page: 3 of 9 (Continue) Impact Test Charpy V-notch Impact Tests from ambient temperature down to -110oC and -196oC Bend Test / Roller Bend Test *API (Addendum ) Bend Test / Rebend Test *SS 32 Part 1: 1999 *SS 32 Part 2: 1986 *SS 18 Part 1: 1999 Fracture Test ASTM E c BS EN ISO : 2010 AS : 2003 ASTM E ASTM E AS : 2003 AS : 2003 BS EN ISO 5173: A1 : 2011 SS 2: Part SS 2: Part SS 2: Part BS 4449: A2 : 2009 SS AWS D1.1/D1.1M 2015 Clause ASME IX 2015 Clause QW-182
4 Page: 4 of 9 (Continue) Flattening Test *ABS Pt.2, Chapter 3: Sect *Lloyd s Pt.2, Chapter 2: Sect Steel Wire Mesh (Grade 300 & 500) (Grade 485) Flaring / Flanging Test (Up to outside diameter of 2 inches) *ABS Pt.2, Chapter 3: Sect 5-23& *Lloyd s Pt.2, Chapter 2: Sect 4.3& Nick Break Test *API (Addendum ) Tension Test Tension on steel wires taken from wire fabric at ambient temperature in the range of 0 kn to 1000 kn with controlled strain rate and crosshead movement, including yield and proof stress. BS EN ISO : 2009 * SS 32 Part 1: 1999 * SS 32 Part 2: 1986 * SS 18 Part 1: 1999 Bend and Rebend Test SS 427: 1998 Weld Shear Test SS 32 Part 1 : 1999 Annex A SS 32 Part 2 : 1986 Clause 4.8.4
5 Page: 5 of 9 Microstructural Test 1. - Macro Examination - Macroscopic Examination on Welds *API (Addendum ) 2. Macro-etching of Metals and Alloys Remarks: (*) denotes product/materials specification 2. Soo Boon Chai 3. Lee Chen Heng ASTM E (Reapproved 2012) BS EN ISO : 2013 ASTM E AS : 2003 Tensile Test at Elevated Temp, (up to 750 C) in the range of 0 kn to 300 kn with controlled strain rate & crosshead movement, including yield & proof stress ASTM E Brinell Hardness Test ASTM E a BS EN ISO : Soo Boon Chai
6 Page: 6 of 9 Fracture Mechanics Toughness Tests Crack Tip Opening Displacement (CTOD) test. BS :1991 ISO (Technical Corrigendum 1:2008) BS EN ISO : 2010 Fracture Mechanics Toughness Tests Crack Tip Opening Displacement (CTOD) - Single Edge Notched Tension (SENT) DNV-RP-F108 : Jan 2006 BS 8571: 2014 Fatigue Test ISO 1099 : 2006 BS EN ISO : 2010 BS EN ISO : 2010 BS 4449 : A3 : 2016 Corrosion Test Hydrogen Induced Cracking (HIC) Test Sulfide Stress Corrosion Cracking (SSCC) Test NACE Standard TM Item No ASTM G (Reapproved 2011) BS EN ISO : 2012 BS EN ISO : 1995 NACE Standard TM Item No Wong Kok Wei 3. Tan Keng Lip
7 Page: 7 of 9 Corrosion Test Pitting Corrosion Test ASTM G (Reapproved 2015) (Method A) 2. Tan Horng You Intergranular Corrosion Test ASTM A (Practice E) Microstructural Test Detection of Detrimental Intermetallic Phase in Duplex Austenitic/Ferritic Stainless Steels Coating Mass Determination for Zinc or Zinc-Alloy Coatings ASTM A (Method C) ASTM A90/A90M-2013 BS EN ISO 1460 : 1995
8 Page: 8 of 9 (METALLURGICAL) Carbon and low alloys steel Elements: Al, B, C, Cr, Co, Cu, Mn, Mo, N, Ni, Nb, P, Si, S, Sn, Ti, V, W Stainless steels Elements: Cr, Ni, Mo, Mn, Si, N, Cu, C, P, S Nickel Alloys Elements: Al, C, Cr, Co, Cu, Fe, Mn, Mo, Nb, P, Si, S, Ti, V, W 2. Tan Horng You Metallurgical Testing Elemental Analysis (Metal Composition Determination) Elemental Analysis (Metal Composition Determination) Elemental Analysis (Metal Composition Determination) ASTM A a ASTM E ASTM A a ASTM E In house Method PTS-M001 (Based on Arc Spark Spectrometry Method)
9 Page: 9 of 9 SITE TESTING: CATEGORY I Dimensional Measurement - Linear measurement in the range of up to 20 m. - Weight measurement in the range of up to 500 kg. - Corner radius measurement in the range of 0.5 mm to 13 mm. * ASTM A6/A6M 2016a * ASTM A20/A20M 2015 * BS EN : 2004 * BS EN : 2004 Remarks: (*) denotes product/materials specification 2. Soo Boon Chai In-House Test Method PTS-M002
Schedule of Accreditation issued by United Kingdom Accreditation Service 2 Pine Trees, Chertsey Lane, Staines-upon-Thames, TW18 3HR, UK
2 Pine Trees, Chertsey Lane, Staines-upon-Thames, TW18 3HR, UK 19 Wildmere Road Banbury Oxfordshire OX16 3JU Contact: Mr J Guntrip Tel: +44 (0)1295 261211 Fax: +44 (0)1295 263096 E-Mail: qualityuk@wmtr.com
More informationSchedule of Accreditation issued by United Kingdom Accreditation Service 2 Pine Trees, Chertsey Lane, Staines-upon-Thames, TW18 3HR, UK
2 Pine Trees, Chertsey Lane, Staines-upon-Thames, TW18 3HR, UK 6 Finchwell Close Contact: Mr M Collier Handsworth Tel: +44 (0)114-2437271 Sheffield Fax: +44 (0)114-2437288 South Yorkshire E-Mail: office@metalstechnology.co.uk
More informationAnnex to the Accreditation Certificate D-PL according to DIN EN ISO/IEC 17025:2005
Deutsche Akkreditierungsstelle GmbH Annex to the Accreditation Certificate D-PL-11299-01-00 according to DIN EN ISO/IEC 17025:2005 Period of validity: 17.10.2016 to 16.10.2021 Holder of certificate: Salzgitter
More informationSCOPE OF ACCREDITATION TO ISO/IEC 17025:2005
SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005 ELEMENT MATERIALS TECHNOLOGY BROKEN ARROW LLC 3100 North Hemlock Circle Broken Arrow, OK 74012 Gilbert Monos Phone: 918 258 6066 gil.monos@element.com MECHANICAL
More informationLista standard utilizzati per l'esecuzione dei test RTM Breda
ASTM E415-08 ASTM E415-14 Chemical analysis of carbon steels ASTM E415-99a RCCM MC 1350 ASTM E1086-08 Chemical analysis of stainless steels ASTM E1086-14 Quantometric chemical analysis of laminated or
More informationAnnex to the Accreditation Certificate D-PL according to DIN EN ISO/IEC 17025:2005
Deutsche Akkreditierungsstelle GmbH Annex to the Accreditation Certificate D-PL-18716-01-00 according to DIN EN ISO/IEC 17025:2005 Period of validity: 17.11.2014 to 13.05.2018 Holder of certificate: Institut
More informationATI FLAT ROLLED PRODUCTS Brackenridge, PA for technical competence in the field of
A2LA has accredited Brackenridge, PA for technical competence in the field of Mechanical Testing This laboratory is accredited in accordance with the recognized International Standard ISO/IEC 17025:2005
More informationAccredited Laboratory
Accredited Laboratory A2LA has accredited WESTMORELAND MECHANICAL TESTING & RESEARCH Youngstown, PA for technical competence in the field of Mechanical Testing This laboratory is accredited in accordance
More informationSCOPE OF ACCREDITATION TO ISO/IEC 17025:2005. TSP / USB LABORATORY South Main Street Houston, TX Lester Burgess Phone:
SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005 TSP / USB LABORATORY 1 12895 South Main Street Houston, TX 77035 Lester Burgess Phone: 713 726 1000 MECHANICAL Valid To: June 30, 2018 Certificate Number: 0929.01
More informationSchedule of Accreditation issued by United Kingdom Accreditation Service High Street, Feltham, Middlesex, TW13 4UN, UK
Schedule of ccreditation United Kingdom ccreditation Service 21-47 High Street, Feltham, Middlesex, TW13 4UN, UK ccredited to Moxley Industrial Centre Western Way Wednesbury WS10 7G United Kingdom Contact:
More informationSCOPE OF ACCREDITATION TO ISO/IEC 17025:2005
SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005 WESTMORELAND MECHANICAL TESTING & RESEARCH, INC. 1 221 Westmoreland Drive Youngstown, PA 15696 Michael Self Phone: 724 537 3131 E-mail: mself@wmtr.com MECHANICAL
More informationSchedule of Accreditation issued by United Kingdom Accreditation Service 2 Pine Trees, Chertsey Lane, Staines-upon-Thames, TW18 3HR, UK
Schedule of ccreditation United Kingdom ccreditation Service 2 Pine Trees, Chertsey Lane, Staines-upon-Thames, TW18 3HR, UK ccredited to Moxley Industrial Centre Western Way Wednesbury WS10 7G United Kingdom
More informationSCOPE OF ACCREDITATION TO ISO/IEC 17025:2005
SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005 IMR TEST LABS 131 Woodsedge Drive Lansing, NY 14882 Deena Crossmore Phone: 607-533-7000 Deena.Crossmore@imrtest.com MECHANICAL Valid to: April 30, 2020 Certificate
More informationATI 2205 ATI Technical Data Sheet. Duplex Stainless Steel GENERAL PROPERTIES. (UNS S31803 and S32205)
ATI 2205 Duplex Stainless Steel (UNS S31803 and S32205) GENERAL PROPERTIES ATI 2205 alloy (UNS S31803 and/or S32205) is a nitrogen-enhanced duplex stainless steel alloy. The nitrogen serves to significantly
More informationSchedule of Accreditation issued by United Kingdom Accreditation Service 2 Pine Trees, Chertsey Lane, Staines-upon-Thames, TW18 3HR, UK
Unit 10 Victory Park Victory Road Derby Derbyshire DE24 8ZF ontact: Mr G Tomlinson Tel: +44 (0)1332 275700 Fax: +44 (0)1332 275729 E-Mail: graham.tomlinson@ndtservices.co.uk Website: www.ndtservices.co.uk
More informationDATA SHEET ZERON 100 UNS S32760 THE GLOBAL LEADER IN SPECIALTY ALLOYS ALLOYS AND PROCESSING
DATA SHEET ZERON 100 UNS S32760 THE GLOBAL LEADER IN SPECIALTY ALLOYS ALLOYS AND PROCESSING ZERON 100 Data Sheet Contents Specifications, Chemical Composition, Applications and Features...2 Performance
More informationForta SDX 2507 EN , ASTM UNS S32750
Forta SDX 2507 EN 1.4410, ASTM UNS S32750 General characteristics Forta SDX 2507 is a super duplex product with higher corrosion resistance and mechanical strength than Forta DX 2205. Often used in extremely
More informationIMPACT. Chemical composition For the chemical composition of the ladle analysis the following limits are applicable (in %):
IMPACT Wear resistant steel Material data sheet, edition April 2016 1 DILLIDUR IMPACT is a wear resistant steel with a nominal hardness of 340 HBW in delivery condition. DILLIDUR IMPACT is not a constructional
More informationSchedule of Accreditation issued by United Kingdom Accreditation Service 2 Pine Trees, Chertsey Lane, Staines-upon-Thames, TW18 3HR, UK
Unit 10 Victory Park Victory Road Derby Derbyshire DE24 8ZF ontact: Mr ndy Harrison Tel: +44 (0)1332 275700 E-Mail: andy.harrison@intertek.com Website: www.ndtservices.co.uk Laboratory locations: below
More informationStainless Steel & Stainless Steel Fasteners Chemical, Physical and Mechanical Properties
Stainless Steel & Stainless Steel Fasteners Chemical, Physical and Mechanical Properties Stainless steel describes a family of steels highly resistant to tarnishing and rusting that contain at least two
More informationATI ATI 2205 Alloy (UNS S31803 and S32205) Duplex Stainless Steel. Technical Data Sheet
Alloy (UNS S31803 and S32205) Duplex Stainless Steel GENERAL PROPERTIES alloy (UNS S31803 and/or S32205) is a nitrogenenhanced duplex stainless steel alloy. The nitrogen serves to significantly improve
More informationDAHE STEEL STRUCTURE CO.,LTD.
DAHE ENTERPRISES LIMITED DAHE STEEL STRUCTURE CO.,LTD. FOREWORD FOREWORD Dahe Enterprises Ltd registers in Hong Kong. She owns two sole-investment companies Dahe Steel Structure (HK) Co., Ltd & Nanhai
More informationAll Metals Test Certificates
What is a test Certificate and why is it important? ~ It is effectively a Guarantee that ensures Traceability and protects all parties ~ In many cases the material has no value to a customer unless it
More informationSANICRO 30 TUBE AND PIPE, SEAMLESS
SANICRO 30 TUBE AND PIPE, SEAMLESS DATASHEET Sanicro 30 is a low-carbon version of Alloy 800 austenitic nickel-iron-chromium alloy. The grade is used for steam generator tubing in nuclear stations (PWR)
More information25%Cr SUPERDUPLEX
DATA SHEET B-62 25%Cr SUPERDUPLEX - 2507 METRODE PRODUCTS LTD HANWORTH LANE, CHERTSEY SURREY, KT16 9LL Tel: +44(0)1932 566721 Fax: +44(0)1932 565168 Sales Fax: +44(0)1932 569449 Technical Fax: +44(0)1932
More informationWELDING CONSUMABLES FOR DUPLEX AND SUPERDUPLEX STAINLESS STEELS OPTIMISING PROPERTIES AFTER HEAT TREATMENT
WELDING CONSUMABLES FOR DUPLEX AND SUPERDUPLEX STAINLESS STEELS OPTIMISING PROPERTIES AFTER HEAT TREATMENT by G B Holloway & J C M Farrar Metrode Products Limited ABSTRACT The first 50 years of duplex
More informationWear-resistant steels. Technical terms of delivery for heavy plates. voestalpine Grobblech GmbH
Wear-resistant steels Technical terms of delivery for heavy plates voestalpine Grobblech GmbH www.voestalpine.com/grobblech Wear-resistant steels durostat durostat 400 durostat 450 durostat 500 durostat
More informationUR 2202 is a low nickel, low molybdenum stainless steel designed to match the corrosion resistance of 304L in most environments.
Industeel URANUS 2202 The alternative to 304L UR 2202 is a low nickel, low molybdenum stainless steel designed to match the corrosion resistance of 304L in most environments. Its higher strength allows
More informationComparison of BS and BS EN for steel materials
Comparison of BS and BS EN for steel materials Appendix This table only highlights the comparison of BS and BS EN on steel materials, which are relevant to plan approval. Title of BS BS BS EN Title of
More informationInfluence of Post Weld Heat Treatment on the HAZ of Low Alloy Steel Weldments
Influence of Post Weld Heat Treatment on the HAZ of Low Alloy Steel Weldments S. Rasool Mohideen* and A.M. Ahmad Zaidi Faculty of Mechanical and Manufacturing Engineering, UTHM *Corresponding email: rasool
More informationFlux-cored Wire Electrode for Ar+CO 2 Gas Shielded Arc Welding. "DWA-81Ni1" Productivity through filler metal selection
DOC.No.723-U47 Jun.23 Flux-cored Wire Electrode for Ar+CO 2 Gas Shielded Arc Welding "DWA-81Ni1" Doc.No.723-U47 Flux-cored Wire Electrode for Ar+CO2 Gas Shielded Arc Welding "DWA-81Ni1" AWS A5.29-1998
More informationATI Datalloy HP TM Alloy
ATI Datalloy HP TM Alloy UNS N08830 INTRODUCTION ATI Datalloy HP TM alloy is a Ni-Cr-Mo-Fe non-magnetic high strength alloy with exceptional pitting and crevice corrosion resistance, while maintaining
More informationSTANDARD FERRITIC STAINLESS STEELS
T e c h n i c a l B r o c h u r e STANDARD FERRITIC STAINLESS STEELS Unity AISI UNS EN U-40910 409 S40910 1.4512 U-430 430 S43000 1.4016 U-430DDQ 430 S43000 1.4016 U-439 439 S43035 1.4510 - S43940 U-1.4509
More informationSCOPE OF ACCREDITATION TO ISO/IEC 17025:2005. ELEMENT NEWTOWN 2 Pheasant Run Newtown, PA Douglas Reed Phone: MECHANICAL
SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005 ELEMENT NEWTOWN 2 Pheasant Run Newtown, PA 18940 Douglas Reed Phone: 267 759 3886 MECHANICAL Valid To: April 30, 2016 Certificate Number: 0478.01 In recognition
More informationNickel Based Superalloy Incoloy 800 (UNS N08800)
Nickel Based Superalloy Incoloy 800 (UNS N08800) Nickel-Iron-Chromium alloy Incoloy 800 has fine strength and suitable resistance to oxidation and carburization at high temperatures. It offers elevated
More informationCHROMESHIELD 22 STAINLESS STEEL
CHROMESHIELD 22 STAINLESS STEEL P R O D U C T D ATA B U L L E T I N Appliances Food Service Equipment Architectural Welded Components Tubing Cookware Applications Potential CHROMESHIELD 22 Stainless Steel
More informationDevelopment of large-diameter line pipe for offshore applications
Development of large-diameter line pipe for offshore applications Dr. Michael Gräf Europipe Deutschland GmbH, Muelheim, Germany Dr. Hans-Georg Hillenbrand Europipe GmbH, Ratingen, Germany EUROPIPE. The
More informationImpact 7 Steel. A Durable, Dependable Steel Solution For Harsh Environments. Technical Data. Alloy Description. Alloy Type. Typical Applications
Impact 7 Steel Technical Data A Durable, Dependable Steel Solution For Harsh Environments Alloy Description As a world leader in steel manufacturing, TimkenSteel specializes in providing custom steel solutions
More information71T1 - Gas Shielded Flux Cored Welding Wire Provides excellent performance in all position welding. Weld Metal - Chemistry
Flux Cored Wire 71T1 - Gas Shielded Flux Cored Welding Wire Provides excellent performance in all position welding Description: Provides a stable arc, low spatter, easy to remove slag, and neat weld metal.
More information1¼Cr-½Mo CREEP RESISTING STEEL
DATA SHEET A-12 1¼Cr-½Mo CREEP RESISTING STEEL METRODE PRODUCTS LTD HANWORTH LANE, CHERTSEY SURREY, KT16 9LL Tel: +44(0)1932 566721 Fax: +44(0)1932 565168 Sales Fax: +44(0)1932 569449 Technical Fax: +44(0)1932
More informationPRELIMINARY INVESTIGATIONS OF LOW-NICKEL STAINLESS STEELS FOR STRUCTURAL APPLICATIONS
PRELIMINARY INVESTIGATIONS OF LOW-NICKEL STAINLESS STEELS FOR STRUCTURAL APPLICATIONS J. Kerr and R. Paton Mintek, Private Bag X3015, Randburg. 2125. South Africa. E-mail: jonathank@mintek.co.za ABSTRACT
More informationMaterial data sheet. EOS NickelAlloy HX. Description, application
Material data sheet is a heat and corrosion resistant metal alloy powder intended for processing on EOS M 290 systems. This document provides information and data for parts built using powder (EOS art.-no.
More informationOutokumpu 2507 UNS S32750
UNS S32750 North American Version Imperial Units Design Features Very high strength High resistance to pitting, crevice, and general corrosion Very high resistance to chloride stress corrosion cracking
More informationMaterial data sheet. EOS MaragingSteel MS1. Description
EOS MaragingSteel MS1 EOS MaragingSteel MS1 is a steel powder which has been optimized especially for processing on EOSINT M systems. This document provides information and data for parts built using EOS
More informationOvermatching Superalloy Consumable Inco-weld 686CPT Broadens its Applications to Include Welding Super Austenitic and Super Duplex Stainless Steels
Overmatching Superalloy Consumable Inco-weld 686CPT Broadens its Applications to Include Welding Super Austenitic and Super Duplex Stainless Steels P0468 Authors: Ph.D C. Thornton, B.Sc C. Cooper Special
More informationSeamless tube. Sandvik SAF S-1874-ENG May 2000 Cancels all previous editions
Seamless tube Sandvik S-1874-ENG May 2 Cancels all previous editions Sandvik is a duplex stainless steel (austenitic-ferritic). It is characterised by: high resistance to stress corrosion cracking in chloride-bearing
More informationC27200 CuZn37 Industrial Rolled
C272 Alloy Designation EN DIN CEN/TS 13388 (2.321) CW58L JIS C 272 BS CZ 17 UNS C272 Brass Rolled Products KME offers a wide range of brass rolled products in the form of strips, sheets and discs in order
More informationApplied Materials. The Power of Trust. The Future of Energy.
Applied The Power of Trust. The Future of Energy. Applied EXTENDING EQUIPMENT LIFE Fluorescent magnetic particle inspection Assessment of fracture features by scanning electron microscopy Failure analysis,
More informationMarcegaglia USA Munhall
Marcegaglia USA Munhall 1 Marcegaglia USA The Marcegaglia USA production facility is located in Munhall, PA (just outside Pittsburgh). It is devoted to the manufacturing of stainless steel, duplex and
More informationPRODUCT: WELDED PIPE SPECIFICATION: 355.6*9.52 MATERIAL: S32205 PRODUCT: SEAMLESS PIPE. SPECIFICATION: Φ33mm*1mm MATERIAL: S31803
Special Piping Materials is renowned for the high volume of Duplex and Super Duplex products that it stocks. It supplies these materials to countless companies around the world who use its product s in
More informationmaterial specifications
METAL sheet / plate AS/NZS 1734 " and aluminium alloys - Flat sheet, coiled sheet and plate" Material Finish 304SS 0.9mm Bright annealed Alloy 5052 H32 Ultimate tensile stress 215 MPa minimum Yield tensile
More informationVM12-SHC Technical-Datasheet
VM12-SHC Technical-Datasheet p.2 / Vallourec / VM12-SHC Technical-Datasheet Innovation by nature Specializing in the most complex applications, Vallourec relies on its 6 R&D centers around the world and
More information12 SR STAINLESS STEEL. More Oxidation Resistant Than Type 409. More Creep Resistant Than Type 409. Applications Potential
12 SR STAINLESS STEEL P R O D U C T D ATA B U L L E T I N More Oxidation Resistant Than Type 409 More Creep Resistant Than Type 409 Applications Potential AK Steel 12 SR Stainless Steel was developed specifically
More informationStructural Vessel Repairs Using Automated Weld Overlays
Structural Vessel Repairs Using Automated Weld Overlays Mahmod Samman, Ph.D., P.E. mms@hes.us.com Houston Engineering Solutions, LLC Eric Williams George Gemmel ewilliams@cimsltd.com ggemmell@cimsltd.com
More information7018 MR. Conformances
STICK (SMAW) ELECTRODE Excalibur 7018 MR Mild Steel, Low Hydrogen AWS Improved coating integrity Extreme bendability 60% less moisture pickup vs. competition Reduction of arc starting porosity Clear puddle
More informationVDM Alloy 80 A Nicrofer 7520 Ti
VDM Alloy 80 A Nicrofer 7520 Ti Material Data Sheet No. 4048 February 2017 February 2017 VDM Alloy 80 A 2 VDM Alloy 80 A Nicrofer 7520 Ti VDM Alloy 80 A is a nickel-chromium alloy that can be age-hardened.
More informationDuplex Stainless Steel
Duplex Stainless Steel Steel grades Outokumpu EN ASTM LDX 211 1.4162 S3211 SAF 234 1.4362 S3234 1.4462 S3 S3183 SAF 257 1.441 S3275 Characteristic properties High strength Good to very good resistance
More informationDevelopment of Welding And Testing Technique/s For Dissimilar Metal Welding Of SA-508 Gr-3,class-1 Material With SS-316L.
Development of Welding And Testing Technique/s For Dissimilar Metal Welding Of SA-508 Gr-3,class-1 Material With SS-316L. By Khalid Mahmood Pakistan Welding Institute (PWI) PAKISTAN ATOMIC ENERGY COMMISSION
More informationReview of EN ISO
Svetskommissionen Review of EN ISO 9606-1 Qualification testing of welders Fusion welding Purpose: Ensure the ability of a welder to follow written instructions and verify the welders skill. These are
More informationCONSIGNMENT TEST REPORT
SIRIM QAS INTERNATIONAL SDN. BHD. (Company No: 410334-X) Civil & Construction Section No. 1, Persiaran Dato' Menteri, PO Box 7035, Section 2 40700 Shah Alam Selangor (Tel) 0355445852/5184 (Fax) 0355445855/5186
More informationWelding Consumables for Lean Duplex Stainless Steels
Welding Consumables for Lean Duplex Stainless Steels Graham Holloway, Adam Marshall & Zhuyao Zhang Metrode Products Ltd, UK Presenter: Presenter - Graham Holloway Graham Holloway has been at Metrode Products
More informationTrue Stress and True Strain
True Stress and True Strain For engineering stress ( ) and engineering strain ( ), the original (gauge) dimensions of specimen are employed. However, length and cross-sectional area change in plastic region.
More informationSPECIFICATION FOR PRESSURE VESSEL PLATES, CARBON STEEL, FOR MODERATE- AND LOWER-TEMPERATURE SERVICE
Technical Literature: ASME SA-516 [ASTM A516] Company Website: www.metalspiping.com SA-516/SA-516M Carbon & Low Alloy Steels From Hebei Metals Industrial Limited SPECIFICATION FOR PRESSURE VESSEL PLATES,
More informationME -215 ENGINEERING MATERIALS AND PROCESES
ME -215 ENGINEERING MATERIALS AND PROCESES Instructor: Office: MEC325, Tel.: 973-642-7455 E-mail: samardzi@njit.edu PROPERTIES OF MATERIALS Chapter 3 Materials Properties STRUCTURE PERFORMANCE PROCESSING
More informationMaterial data sheet. EOS MaragingSteel MS1. Description
EOS MaragingSteel MS1 EOS MaragingSteel MS1 is a tool steel powder intended for processing on EOS DMLS TM systems. This document provides information and data for parts built using EOS MaragingSteel MS1
More informationUgitech Stainless steel solutions for the oil and gas industry
Ugitech Stainless steel solutions for the oil and gas industry 02 Stainless steel solutions for the oil and gas industry Ugitech and the Oil and Gas industry The world s conventional oil reserves are seriously
More informationHot rolled Steel Plates, Sheets and Coils
Hot rolled Steel Plates, Sheets and Coils Steels resistant to wear and surface pressure AR Hardened steel resistant to abrasive wear cause by rolling contact and high surface pressure can be used to signiþ
More informationMaterial data sheet. EOS NickelAlloy IN625. Description
EOS NickelAlloy IN625 EOS NickelAlloy IN625 is a heat and corrosion resistant nickel alloy powder which has been optimized especially for processing on EOSINT M systems. This document provides information
More informationDuplex Stainless Steel
Duplex Stainless Steel Steel grades Outokumpu EN ASTM LDX 211 1.4162 S3211 SAF 234 1.4362 S3234 25 1.4462 S325 S3183 SAF 257 1.441 S3275 Characteristic properties High strength Good to very good resistance
More informationProperties of Reinforcing Steels
Properties of Reinforcing Steels 1.0 Introduction Part 2 of this Guide describes the most common process routes for the manufacture of reinforcing steels in use in the UK. This part now considers the various
More informationSECTION 3.0 DEFINITION OF TERMS AND ABBREVIATIONS
SECTION 3.0 DEFINITION OF TERMS AND ABBREVIATIONS 3.1 Terms... 1 3.2 Symbols and Abbreviations... 2 September 2010 API Recommended Practice 571 3-1 3.1 Terms 3.1.1 Austenitic a term that refers to a type
More informationFSection F. Sheets and Plates. Plates. Plates and Sheets. Plates. Plates. Sheets and Plates
FSection F HIGH STRENGTH LOW ALLOY STEELS HEAT TREATED CONSTRUCTIONAL ALLOY STEELS ABRASION RESISTING STEELS HIGH STRENGTH LOW ALLOY STEELS... 2-3 Sheets and Plates HEAT TREATED CONSTRUCTIONAL ALLOY STEELS...
More informationDX2507 DX2507. Duplex stainless steel offer grade. General characteristics. Chemical composition. Material standards
Duplex stainless steel offer grade Chemical composition Elements C Cr Ni Mo N PREN* % weight
More informationLicensed Copy: John May, Powertrain Ltd., February 20, 2002, Uncontrolled Copy, (c) BSI
BRITISH STANDARD BS 70-3: Incorporating Amendment Nos. 1 and 2 Specification for Wrought steel for mechanical and allied engineering purposes Part 3: Bright bars for general engineering purposes BS70-3:
More informationMECHANICAL PROPERTIES OF STRUCTURAL STAINLESS STEELS WŁAŚCIWOŚCI MECHANICZNE KONSTRUKCYJNYCH STALI NIERDZEWNYCH
TECHNICAL TRANSACTIONS CIVIL ENGINEERING CZASOPISMO TECHNICZNE BUDOWNICTWO 4-B/2014 IZABELA TYLEK*, KRZYSZTOF KUCHTA* MECHANICAL PROPERTIES OF STRUCTURAL STAINLESS STEELS WŁAŚCIWOŚCI MECHANICZNE KONSTRUKCYJNYCH
More informationCreep and High Temperature Failure. Creep and High Temperature Failure. Creep Curve. Outline
Creep and High Temperature Failure Outline Creep and high temperature failure Creep testing Factors affecting creep Stress rupture life time behaviour Creep mechanisms Example Materials for high creep
More informationMechanical Properties of Metals. Goals of this unit
Mechanical Properties of Metals Instructor: Joshua U. Otaigbe Iowa State University Goals of this unit Quick survey of important metal systems Detailed coverage of basic mechanical properties, especially
More informationWELDING WIRES FOR MAG(CO 2 ) WELDING
WELDING WIRES FOR MAG(CO 2 ) WELDING Classification: EN 440 G4Si1 EN1668 WSG2 DIN 8559 SG 2 ASME/AWS/A 5.18 ER70S6 Description and Application: Solid copper coated welding wire for welding in gas shielding
More informationProduct Test Report. PTR-3074 Swagelok Company. Rev. B Solon Road January 2015 Solon, Ohio U.S.A. Page 1 of 5
Solon, Ohio 44139 U.S.A. Page 1 of 5 TITLE Resistance of SAF 2507 Super Duplex Stainless Steel to Chloride Stress Corrosion Cracking PRODUCT TESTED Test samples were machined from Sandvik SAF 2507 solution-annealed
More informationGLORIA STEEL LIMITED Web:www.gloriasteel.com Fax: (UNS S32205/S31803) EN duplex stainless steel
2205 (UNS S32205/S31803) EN 1.4462 duplex stainless steel A 22Cr-3Mo Stainless Steel Alloy 2205 is a 22% Chromium, 3% Molybdenum, 5-6% Nickel, nitrogen alloyed duplex stainless steel with high general,
More informationA Review of Suitability for PWHT Exemption Requirements in the Aspect of Residual Stresses and Microstructures
Transactions, SMiRT-23 Division IX, Paper ID 612 (inc. assigned division number from I to X) A Review of Suitability for PWHT Exemption Requirements in the Aspect of Residual Stresses and Microstructures
More informationDate of Issue: Affected Publication: ADDENDUM 2
Date of Issue: March 2012 Affected Publication: API Recommended Practice 934-A, Materials and Fabrication of 2 1/4Cr- 1Mo, 2 1 /4Cr-1Mo- 1 /4V, 3Cr-1Mo, and 3Cr-1Mo- 1 /4V Steel Heavy Wall Pressure Vessels
More informationSTAINLESS STEELS UTILITY FERRITIC. T e c h n i c a l B r o c h u r e. U-3CR12L S U-410S 410S S41008 U-3CR12
R T e c h n i c a l B r o c h u r e UTILITY FERRITIC STAINLESS STEELS Unity AISI UNS EN U-3CR12 U-3CR12L S43 1.43 U-4S 4S S48 COLUMBUS STAINLESS [Pty] Ltd www.columbusstainless.co.za Introduction 3CR12
More informationWELDING WIRES FOR MAG(CO 2 ) WELDING
WELDING WIRES FOR MAG(CO 2 ) WELDING Classification: EN 440 G4Si1 EN1668 WSG2 DIN 8559 SG 2 AWMES/AWS A 5.18 ER70S6 Description and Application: Solid copper coated welding wire for welding in gas shielding
More informationNew Steel Plate for LNG Storage Tank
Technical Report New Steel Plate for LNG Storage Tank UDC 669. 15 ' 24-194. 2 : 662. 69 Takayuki KAGAYA* Takahiro KAMO Hironori WAKAMATSU Kazushi OHNISHI Hitoshi FURUYA Yasunori TAKAHASHI Toshimichi NAGAO
More informationThe American Institute
Cynthia J. Lanz Cynthia J. Lanz is Director of Specifications at the American Institute of Steel Construction (AISC) in Chicago. The American Institute of Steel Construction (AISC) will welcome the new
More information304/304L STAINLESS STEEL
304/304L STAINLESS STEEL P R O D U C T D ATA B U L L E T I N Architectural Moldings and Trim Textile Kitchen Equipment Paper Pharmaceutical and Chemical Industry Processing Equipment Applications Potential
More informationStandard Specification for Stainless Chromium-Nickel Steel-Clad Plate 1
Enclosed is a computer file in PDF format containing one or more ASTM Standards. The documents contained in this e-mail are complimentary, prepublication copies of the final edited documents. These documents
More informationThe ATI 17-4 precipitation hardening stainless steel (S17400) is covered by the following wrought product specifications.
ATI 17-4 Precipitation Hardening Stainless Steel (UNS S17400) INTRODUCTION ATI 17-4 precipitation hardening stainless steel (S17400), Type 630, is a chromium-nickel-copper precipitation hardening stainless
More informationBIS or used as Amendment to STANDARD comments is 15 Nov. 2008
Doc: MTD 4 (4730) For comments only BUREAU OF INDIAN STANDARDS Modified draft Indian Standard HOT ROLLED CARBON STEEL SHEET AND STRIP (Sixth Revision of IS 1079) ICS 77.140.50 Not to be reproduced without
More informationPlate HARDWEAR Plate: Premium abrasion-resistant steels Introducing HARDWEAR 550F
ArcelorMittal USA Plate HARDWEAR Plate: Premium abrasion-resistant steels Introducing HARDWEAR 55F Introduction HARDWEAR, a line of premium abrasion-resistant plate steels, is available in four grades
More informationQuiz 1 - Mechanical Properties and Testing Chapters 6 and 8 Callister
Quiz 1 - Mechanical Properties and Testing Chapters 6 and 8 Callister You need to be able to: Name the properties determined in a tensile test including UTS,.2% offset yield strength, Elastic Modulus,
More informationMATERIALS SCIENCE-44 Which point on the stress-strain curve shown gives the ultimate stress?
MATERIALS SCIENCE 43 Which of the following statements is FALSE? (A) The surface energy of a liquid tends toward a minimum. (B) The surface energy is the work required to create a unit area of additional
More informationStandard Specification for Piping Fittings of Wrought Carbon Steel and Alloy Steel for Low-Temperature Service 1
Designation: A 420/A 420M 07 Standard Specification for Piping Fittings of Wrought Carbon Steel and Alloy Steel for Low-Temperature Service This standard is issued under the fixed designation A 420/A 420M;
More informationA STUDY OF CASTING CHARACTERISTICS FOR DIE-CAST ALUMINUM ALLOY
ME8109: Casting And Solidification of Material A STUDY OF CASTING CHARACTERISTICS FOR DIE-CAST ALUMINUM ALLOY Department of Mechanical & Industrial Engineering Graduate Program in Mechanical Engineering
More informationSpecification ALLOYED STEEL FOR QUENCHING AND TEMPERING, HIGH STRENGTH All.steel f.quen.a.temp, h.str.
Class: Heat-treatable steel Specification 16-09 ALLOYED STEEL FOR QUENCHING AND TEMPERING, HIGH STRENGTH Class No.:11 JED 723 Previous Edition Abbreviated Title 15-07 All.steel f.quen.a.temp, h.str. 8
More informationHOT ROLLED STEEL FLAT PRODUCTS FOR STRUCTURAL FORMING AND FLANGING PURPOSES SPECIFICATION (Third Revision of IS 5986)
For Comments Only Draft Indian Standard Doc: MTD 4(4939) HOT ROLLED STEEL FLAT PRODUCTS FOR STRUCTURAL FORMING AND FLANGING PURPOSES SPECIFICATION (Third Revision of IS 5986) ICS 77.140.50 Not to be reproduced
More informationVDM Alloy 718 CTP Nicrofer 5219 Nb
VDM Alloy 718 CTP Nicrofer 5219 Nb Material Data Sheet No. 4127 September 2017 September 2017 VDM Alloy 718 CTP 2 VDM Alloy 718 CTP Nicrofer 5219 Nb VDM Alloy 718 CTP is an age-hardenable nickel-chromium-iron-molybdenum
More information