Schedule of the 1st International Joint Symposium on Joining and Welding (IJS-JW 2013)
|
|
- Marshall Daniel
- 6 years ago
- Views:
Transcription
1 Registration Schedule of the 1st International Joint Symposium on Joining and Welding (IJS-JW 2013) 6-November: 8:00-17:00 7-Nobember: 8:00-18:00 8-Nobember: 8:00-11: November 9:00-9:20 Opening Ceremony at Obit Hall A 9:20-10:00 Plenary Lecture 1 at Obit Hall A 10:00-10:40 Plenary Lecture 2 at Obit Hall A 10:40-11:00 Coffee Break ( Room ) ( Obit Hall A ) ( Obit Hall B ) 11:00-12:40 Aluminium (4) Process Development -1 (5) 12:40-13:40 Lunch 13:40-15:00 Magnesium (4) Process Development -2 (4) 15:00-15:20 Coffee Break 15:20-16:40 Steel (4) Friction Stir Spot Welding (4) 7 - November 9:00-10:20 Dissimilar Welding -1 (4) Modeling and Control (4) 10:20-10:40 Coffee Break 10:40-12:00 Dissimilar Welding -2 (4) Visualization of Materials Flow (4) 12:00-13:30 Lunch 13:30-14:50 Dissimilar Welding -3 (4) Friction Stir Processing -1 (4) 14:50-15:10 Coffee Break 15:10-16:30 Friction Welding (3) Friction Stir Processing -2 (4) 16:30-18:00 Poster Session 18:00-20:00 Banquet 8 - November 9:00-10:20 Fatigue (4) FSW Tools (4) 10:20-10:40 Coffee Break 10:40-12:00 Microstructure and Properties (4) General Welding (4) 12:00-12:20 Closing Ceremony afternoon Excursion : JWRI Tour 1
2 TECHNICAL PROGRAM of IJS-JW Oral Presentation- Wednesday 6 - November 9:00-9:20 Opening ceremony Greetings: Prof. Hidetoshi Fujii, Osaka University The Conference Chairman Prof. Seiji Katayama, Osaka University The Director of Joining and Welding Research Institute, Osaka University Dr. Graham Wylde, The Welding Institute, UK Prof. Jon C. Lippold Ohio State University, USA 9:20-10:40 Plenary lectures Chair Person: Prof. Kazuhiro Nakata (Osaka University) Plenary lecture 1: "Microstructure evolution of metallic materials during friction stir welding" Prof. Hiroyuki Kokawa (Tohoku University, Japan), Plenary lecture 2: "A Review on Microstructure and Properties of Friction Spot Welds in Al-based Similar and Dissimilar Joints" Dr. J.F. dos Santos (Helmholtz-Zentrum Geesthacht, Germany), 2
3 Room A, (Wednesday, 6) 11:00-12:20 Aluminium Chair Person: Toshiya Shibayanagi (Toyama University) 11:00-11:20 [Invited] "Research on Reverse Dura Rotation Friction Stir Welding Process" Huijie Liu (Harbin Institute of Technology) 11:20-11:40 "Effect of Friction Stir Welding Parameters on Properties of AA6061 Aluminum Alloy Butt Welded Joints" Abdel-Monem El-Batahgy (Central Metallurgical R&D Institute), Belal Terad (Arab Organization for Industrialization), Adel Omar (Banha University) 11:40-12:00 "Effect of Peak Temperature During Friction Stir Welding on Microstructure Evolution of Aluminum alloy 1050" Kosuke Inagaki (Tohoku University), Sergey Mironov (Tohoku University), Yutaka Sato (Tohoku University, Hiromichi Fujii (Tohoku University), Hiroyuki Kokawa (Tohoku University) 12:00-12:20 "Material Flow and Mechanical Properties on Friction Stir Lap Welds of Alclad AA2024 Sheet" Jong-Ning Aoh (National Chung Cheng University), Chih-Wei Huang (National Chung Cheng University), Pai-Chen Lin (National Chung Cheng University) 13:40-15:00 Magnesium Chair Person: Huijie Liu (Harbin Institute of Technology) 13:40-14:00 "Effect of Microtexture Distribution on Inhomogeneous Deformation and Failure of FSW Mg Alloys" Renlong Xin (Chongqing University), Dejia Liu (Chongqing University), Qing Liu (Chongqing University) 14:00-14:20 "Investigations of Microstructural, Thermal and Local Strain Phenomena of High Speed Friction Stir Processed Mg AZ31" Leon Leander Hütsch (Helmholtz-Zentrum Geesthacht), Jorge F. dos Santos (Helmholtz-Zentrum Geesthacht), Norbert Huber (Helmholtz-Zentrum Geesthacht) 14:20-14:40 "Influence of Friction Stir Processing Parameter on Microstructure of Mg-Gd-Y-Zn-Zr Casting" Qun Yang (Chinese Academy of Sciences), Bolu Xiao (Chinese Academy of Sciences), Dong Wang (Chinese Academy of Sciences), Mingyi Zheng (Harbin Institute of Technology), Zongyi Ma (Chinese Academy of Sciences) 14:40-15:00 "Three-Dimensional Experimental Investigation on Temperature Distribution and Mechanical Properties of AZ31 Mg Alloy Joint by Friction Stir Welding" Lu Sheng (Jiangsu University of Science and Technology), Yang Daili (Jiangsu 3
4 University of Science and Technology) 15:40-17:00 Steel Chair Person: Hiroyuki Kokawa (Tohoku University) 15:40-16:00 [Invited] "Friction Stir Welding of Steels for the Oil and Gas Industry" Antonio J. Ramirez (Brazilian Nanotechnology National Laboratory), Victor F. Pereira (Brazilian Nanotechnology National Laboratory), Julian A. Avila (Brazilian Nanotechnology National Laboratory), Tahiana F.C. Hermenegildo (Brazilian Nanotechnology National Laboratory), Tiago F.A. Santos (Brazilian Nanotechnology National Laboratory), Maysa Terada (Brazilian Nanotechnology National Laboratory), Paulo R. Mei (University of Campinas), Leonardo P. Carvalho (Petrobras S.A.), Ricardo R Marinho (Petrobras S.A.), Marcelo T. P. Paes (Petrobras S.A.) 16:00-16:20 "Effects of Rotation Speed on Microstructure and Hardness of Friction Stir Welded ODS Ferritic Steels" Wentuo Han (Kyoto University), Akihiko Kimura (Kyoto University) 16:20-16:40 "Development of Friction Stir Welding of High Strength Steel Sheet" Muneo Matsushita (JFE Steel), Yasushi Kitani (JFE Steel), Rinsei Ikeda (JFE Steel), Kenji Oi (JFE Steel), Hidetoshi Fujii (Osaka University) 16:40-17:00 "Mechanical Properties of Friction Stir Welded High Nitrogen Containing Austenitic Stainless Steel" Yasuyuki Miyano (Akita University), Hidetoshi Fujii (Osaka University), Yufeng Sun (Osaka University), Yasuyuki Katada (National Institute for Material Science), Shuji Kuroda (National Institute for Material Science), Gakuya Kudo (Akita University), Osamu Kamiya (Akita University) 4
5 Room B (Wednesday, 6) 11:00-12:40 Process development -1 Chair Person: Antonio J. Ramirez (Brazilian Nanotechnology National Laboratory) 11:00-11:20 [Invited] "Advances in FSW and New Applications" Russell J. Steel (Megastir Technologies) 11:20-11:40 "Friction Welding of Cu-Tube to Al-Tube Plate Using an External Tool by Modified Interference Method" S. Muthukumaran (National Institute of Technology, Tiruchirappalli), P. Atul (National Institute of Technology, Tiruchirappalli), S. Venu Kumar (National Institute of Technology, Tiruchirappalli) 11:40-12:00 "Application of Friction Stir Welding for Several Plastic Materials" Shota Inaniwa (Nagaoka University of Technology), Yohei Kurabe (Nagaoka University of Technology), Yukio Miyashita (Nagaoka University of Technology), Hisashi Hori (Nippon Light Metal) 12:00-12:20 "On Feasibility of Friction Stir Processing of Cylindrical Holes" Abhay Sharma (Indian Institute of Technology, Hyderabad), Nitin Jayawant Panaskar (Indian Institute of Technology Hyderabad) 12:20-12:40 "Study on the Friction Stir Welding Behavior of Several Thermoplastics" Hirohito Hira (Daido University), Hidenori Aoki (Daido University), Toshiya Shibayanagi (Toyama University) 13:40-15:20 Process development -2 Chair Person: Yutaka S. Sato (Tohoku University) 13:40-14:00 "Experimental Study on Ultrasonic Vibration Enhanced Friction Stir Welding" Xiao Chao Liu (Shandong University), Chuan Song Wu (Shandong University) 14:00-14:20 "Miniaturization of FSW Equipment Using Bobbin Tool Concept" Koki Tamashiro (Osaka University), Masayoshi Kamai (Osaka Univ.), Yoshiaki Morisada (Osaka University), Hidetoshi Fujii (Osaka University) 14:20-14:40 "Investigation of Friction Stir Welding Parameter Design for Lap Joining of Pure Titanium" Liu Feng Chao (Osaka University), Liu Hong (Xi'an Jiaotong University), Nakata Kazuhiro (Osaka University), Yamamoto Naotsugu (Kurimoto), Liao Jin Sun (Kurimoto) 14:40-15:00 "Effect of Post Weld Heating on Microstructure and Mechanical Properties of Friction Stir Welded Thick Al Alloy 5083" Kunitaka Masaki (IHI), Hisashi Matsuoka (IHI), Yu Murakami (IHI), Naoki Oiwa (IHI) 5
6 15:40-17:00 Friction stir spot welding Chair Person: J.F. dos Santos (Helmholtz-Zentrum Geesthacht) 15:40-16:00 [Invited] "Friction Stir Spot Welding of DP1200 Stee" Egoitz Aldanondo (IK4 LORTEK), Alejandro Taboada (IK4 LORTEK), Ekaitz Arruti (IK4 LORTEK), Pedro Alvarez (IK4 LORTEK), Alberto Echeverria (IK4 LORTEK) 16:00-16:20 "Refill Friction Stir Spot Welding of Dissimilar Materials Consisting of A6061 and Hot Dip Galvanized Mild Steel Sheets" Shintaro Fukada (Kawasaki Heavy Industries), Ryoji Ohashi (Kawasaki Heavy Industries), Mitsuo Fujimoto (Kawasaki Heavy Industries), Hideki Okada (Kawasaki Heavy Industries) 16:20-16:40 "Novel Dissimilar Spot Joining of Aluminum Alloy and Steel by Friction Stirring" Masaru Sakamura (Hiroshima Prefectural Technology Research Institute), Kaoru Ohishi (Hiroshima Prefectural Technology Research Institute), Kouhei Ota (Hiroshima Prefectural Technology Research Institute), Hidetoshi Fujii (Osaka University) 16:40-17:00 "Novel Approach to Refill Probe hole in Friction Stir Spot Welding of AA 6061-T6 sheets" S. Venu Kumar (National Institute of Technology, Tiruchirappalli), Swaroop G. Yalagi (National Institute of Technology, Tiruchirappalli), S. Muthu Kumaran (National Institute of Technology, Tiruchirappalli) 6
7 Thursday 7 - November Room A, (Thursday, 7) 9:00-10:20 Dissimilar welding -1 Chair Person: Zhan W. Chen (AUT University) 9:00-9:20 [Invited] "Weldability in Friction Stir Welding Between Dissimilar Metals with Circular Weld Line" Hiroki Mizushima (Toyohashi University of Technology), Toshiaki Yasui (Toyohashi University of Technology), Masahiro Fukumoto (Toyohashi University of Technology) 9:20-9:40 "Friction Welding Characteristics of A1070 and SUS 304" Akiyoshi Kobayashi (Meijo University), Ichinori Shigematsu (National Institute of Advanced Industrial Science and Technology) 9:40-10:00 " Fatigue Behavior of Dissimilar Friction Stir Spot Welds between A6061 and AZ31 Fabricated by a Scroll Grooved Tool without Probe" Yoshihiko Uematsu (Gifu University), Toshifumi Kakiuchi (Gifu University), Yasunari Tozaki (Industrial Research Institute of Gifu Prefecture) 10:00-10:20 "Ultra-thin Friction Stir Welding (FSW) between Aluminium Alloy and Copper" Farazila Yusof (University of Malaya), Firdaus Zakaria (University of Malaya), Mohd Fadzil Jamaludin (University of Malaya), Mohd Hamdi Abdul Shukor (University of Malaya) 10:40-12:00 Dissimilar welding -2 Chair Person: Masahiro Fukumoto (Toyohashi University of Technology) 10:40-11:00 [Invited] "Microstructures in Interface Region and Strengths of Friction Stir Lap Al-to-Steel and Al-to-Ti Welds" Zhan W. Chen (AUT University) 11:00-11:20 "Dissimilar Lap Joining of Thick Plates of A3003 Aluminum Alloy to SUS304 Stainless Steel by Friction Stir Welding" Hidehito Nishida (Kawasaki Heavy Industries), Hirotaka Kurashima (Kawasaki Heavy Industries), Mitsuo Fujimoto (Kawasaki Heavy Industries), Hiroyasu Nishikawa (Kawasaki Heavy Industries), Tomo Ogura (Osaka University), Akio Hirose (Osaka University) 11:20-11:40 "Microscale Evaluation of Mechanical Properties and the Interfacial Microstructures in Friction Stir Welded Aluminum Alloy/Stainless Steel Lap Joints" Tomo Ogura (Osaka University), Taichi Nishida (Osaka University), Hidehito Nishida (Kawasaki Heavy Industries), Mitsuo Fujimoto (Kawasaki Heavy Industries), 7
8 Akio Hirose (Osaka University) 11:40-12:00 "Fatigue Crack Growth Behavior in Weld Nugget Zone of FSWed Similar and Dissimilar Aluminum Alloys Joint" Panya Buahombura (Nagaoka University of Technology), Yukio Miyasita (Nagaoka University of Technology), Yuichi Otsuka (Nagaoka University of Technology), Yoshiharu Mutoh (Nagaoka University of Technology), Seo Nobushiro (Nippon Light Metal) 13:30-14:50 Dissimilar welding -3 Chair Person: Moataz M. Attallah (University of Birmingham) 13:30-13:50 [Invited] "Defects and the Properties of the Dissimilar Materials FSW Joints of Titanium Alloy TC4 with Aluminum Alloy 6061" Aiping Wu (Tsinghua University), Zhihua Song (Tsinghua University), Kazuhiro Nakata (Osaka University), Jinsun Liao (Kurimoto) 13:50-14:10 "Friction Stir Welding of Aluminum Alloy and Copper Dissimilar Pipes of Thin Wall and Small Diameter" Chen Ke (Shanghai Jiao Tong University) 14:10-14:30 "Dissimilar Friction Stir Welding between A6000 and A7000 Series Aluminum Alloys" Kenji Hashimoto (Osaka University), Hidetoshi Fujii (Osaka University), Naoki Kawada (Japan Transport Engineering), Takeshi Ishikawa (Japan Transport Engineering) 14:30-14:50 "Local Alloying between Cu and Zn by Fiction Stir Process" Masato Ueda (Kansai University), Masahiko Ikeda (Kansai University), Yoshiaki Morisada (Osaka University), Hidetoshi Fujii (Osaka University) 15:10-16:10 Friction welding Chair Person: Aiping Wu (Tsinghua University) 15:10-15:30 [Invited] "Friction Welding of Titanium Alloys: Addressing the Structural Integrity Issues Through Process Optimisation" Moataz M. Attallah (University of Birmingham) 15:30-15:50 "Linear Friction Welding Technology Overview" Bertrand C.D. Flipo (TWI) 15:50-16:10 "Mathematical and Numerical Models of the Preliminary Phases of the Linear Friction Welding Process" Alexander Bikmeyev (Ufa State Aviation Technical University), Alfia Yamileva (Ufa State Aviation Technical University), Achilles Vairis (TEI Crete), Rafail Gazizov (Ufa State Aviation Technical University 8
9 Room B, (Thursday, 7) 9:00-10:20 Modeling and control Chair Person: Ninshu Ma (JSOL) 9:00-9:20 [Invited] "Production of Robust Friction Stir Welds" Judy Schneider (Mississippi State University) 9:20-9:40 "Development of Mathematical Modeling for FSW with Particle Method" Fumikazu Miyasaka (Osaka University), Gaku Yoshikawa (Osaka University), Shuhei Matsuzawa (Osaka University) 9:40-10:00 "Modeling of Flash Formation and Defect Removal in Ti-6Al-4V Linear Friction Welds" Anthony McAndrew (Cranfield University) 10:00-10:20 "Two Modes of Metal Transfer Phenomenon in Friction Stir Welding of Low Alloy Steel Plates" S. Muthukumaran (National Institute of Technology, Tiruchirappalli), A. Pradeep (National Institute of Technology, Tiruchirappalli), S. Venu Kumar (National Institute of Technology, Tiruchirappalli) 10:40-12:00 Visualization of materials flow Chair Person: Hisashi Serizawa (Osaka University) 10:40-11:00 "Simulation of Metal Flow in Friction Spot Joining Process with A Particle Method of Smoothed Particle Hydrodynamics" Hiromichi Ohira (JSOL), Ninshu Ma (JSOL), Tei Hirashima (JSOL), Katsumi Okubo (Kawasaki Heavy Industries), Mitsuhiro Kamioka (Kawasaki Heavy Industries) 11:00-11:20 "Analysis on Flow Pattern of Bobbin Tool Friction Stir Welding" Shujin Chen (Jiangsu University of Science and Technology) 11:20-11:40 "Three-Dimensional Visualization of Material Flow during Friction Stir Welding for Steel and Aluminum by Two Pairs of X-ray Yransmission Systems" Takuya Imaizumi (Osaka University), Yoshiaki Morisada (Osaka University), Hidetoshi Fujii (Osaka University) 11:40-12:00 "Effect of Material Flow by Friction Stir Welding between Aluminum and Steel on Weld Interface" Toshiaki Yasui (Toyohashi University of Technology), Takaaki Shimizu (Toyohashi University of Technology), Masahiro Fukumoto (Toyohashi University of Technology) 9
10 13:30-14:50 Friction stir processing -1 Chair Person: Zongyi Ma (Chinese Academy of Sciences) 13:30-13:50 [Invited] "Friction Stir Processing of Ni-base Alloys" John C. Lippold (Ohio State University) 13:50-14:10 [Invited] "Nanostructured Tool Steel Fabricated by Combination of Laser Melting and Friction Stir Processing" Yusuke Kitamura (AMC), Yoshiaki Morisada (Osaka Municipal Technical Research Institute), Tadashi Mizuno (AMC), Genryu Abe (AMC), Toru Nagaoka (Osaka Municipal Technical Research Institute), Yoshihisa Kimoto (Osaka Municipal Technical Research Institute), Masuo Fukusumi (Osaka Municipal Technical Research Institute) 14:10-14:30 "Effect of Friction Stir Processing on Superplastic Behavior of Zn-22Al Alloy" Hamed Mofidi Tabatabaei (Kokushikan University), Tadashi Nishihara (Kokushikan University) 14:30-14:50 "Friction Stir Processing for Ferritic Stainless Steel with Reactive and Non-Reactive Additives" Yoshihisa Kimoto (Osaka Municipal Technical Research Institute), Toru Nagaoka (Osaka Municipal Technical Research Institute), Hiroyuki Watanabe (Osaka Municipal Technical Research Institute), Masao Fukusumi (Osaka Municipal Technical Research Institute), Yoshiaki Morisada (Osaka University), Hidetoshi Fujii (Osaka University) 15:10-16:30 Friction stir processing -2 Chair Person: John C. Lippold (Ohio State University) 15:10-15:30 [Invited] "Fabrication of Metal Matrix Composites via Friction Stir Processing" Zongyi Ma (Chinese Academy of Sciences), Z.Y. Liu (Chinese Academy of Sciences), Q. Zhang (Chinese Academy of Sciences), D.R. Ni (Chinese Academy of Sciences), B.L. Xiao (Chinese Academy of Sciences) 15:30-15:50 [Invited] "Friction Powder Compaction Process for Fabricating Porous Cu by Space Holder Route" Yoshihiko Hangai (Gunma University), Kousuke Zushida (Gunma University), Hidetoshi Fujii (Osaka University), Yufeng Sun (Osaka University), Yoshiaki Morisada (Osaka University), Osamu Kuwazuru (University of Fukui), Nobuhiro Yoshikawa (University of Tokyo) 15:50-16:10 "Boron Carbide Parrticles Reinforced Aluminum Alloy Composite Using Friction Stir Welding" Byung-Wook Ahn (Sungkyunkwan University) 16:10-16:30 "Friction Stir Welding of Grain Boundary Engineered 304 Austenitic Stainless Steel" 10
11 Shun Tokita (Tohoku University), Takashi Yokoyama (Tohoku University), Hiroyuki Kokawa (Tohoku University), Yutaka S. Sato (Tohoku University), Hiromichi T. Fujii (Tohoku University) 11
12 Friday 8 - November Room A, (Friday, 8) 9:00-10:20 Fatigue Chair Person: Seiichiro Tutsumi (Osaka University) 9:00-9:20 "Effects of Laser Peening on Plane Bending Fatigue Properties of Friction Stir Welded A6061-T6 Alloy" Kiyotaka Masaki (Okinawa National College of Technology), Kenji Yamashiro (Graduate School of Kobe University), Yuji Sano (Toshiba) 9:20-9:40 "The Influence of Stored Energy on the Fatigue Crack Propagation of Friction Stir Welded Aluminum Alloy" Qilei Dai (Tsinghua University) 9:40-10:00 "Microstructure and Fatigue Property of Friction Stir Welded Ti-4.5Al-2.5Cr-1.2Fe -0.1C Alloy for Aerospace Applications" Masaaki Nakai (Tohoku University), Mitsuo Niinomi (Tohoku University), Junko Hieda (Tohoku University), Ken Cho (Tohoku University), Kazuya Komine (Tohoku University), Hidetoshi Fujii (Osaka University), Yoshiaki Morisada (Osaka University), Yoshinori Ito (Kobe Steel), Takashi Konno (Kobe Steel), Yoshio Itsumi (Kobe Steel), Hideto Oyama (Kobe Steel), Wataru Abe (Kawasaki Heavy Industries) 10:00-10:20 "3-Dimensional Observation of the Interior Fatigue Fracture Mechanism on Friction Stir Spot Welded Using 300 MPa-Class Automobile Steel Sheets" Joy-A-Ka Sutep (Hiroshima University), Hirano Tomoshi (Hiroshima University), Akebono Hiroyuki (Hiroshima University), Kato Masahiko (Hiroshima University), Sugeta Atsushi (Hiroshima University) 10:40-12:00 Microstructure and properties Chair Person: Rintaro Ueji (Osaka University) 10:40-11:00 "Enhanced Mechanical Properties of Friction Stir welded Martensite Steel Joint under Additional Cooling" Peng Xue (Osaka University), Yuichi Komizo (Osaka University) 11:00-11:20 "Friction Stir Welding of Single Crystal Austenitic Stainless Steel" Kazuhiro Ikeda (Tohoku University), Jongjin Jeon (Tohoku University), Sergey Mironov (Tohoku University), Yutaka Sato (Tohoku University), Hiromichi Fujii (Tohoku University), Hiroyuki Kokawa (Tohoku University), Seung Hwan Park (Hitachi), Satoshi Hirano (Hitachi) 11:20-11:40 "Fragmentation Behavior of Al 3 Ti Particles in Al-Al 3 Ti Composite Deformed by 12
13 Friction Stir Welding" Hisashi Sato (Nagoya Institute of Technology), Yoshito Miyamoto (Nagoya Institute of Technology), Yoshimi Watanabe (Nagoya Institute of Technology), Yasuaki Naito (Nippon Steel & Sumitomo Metal), Tetsuro Nose (Nippon Steel & Sumitomo Metal) 11:40-12:00 "Microsturcture and Mechanical Property of Friction Stir Welded 420J2 Martensitic Stainless Steel" Don Hyun Choi (Sungkyunkwan University), Byung Wook Ahn (Sungkyunkwan University), Yun Mo Yeon (Suwon Science College), Seing Boo Jung (Sungkyunkwan University) 13
14 Room B, (Friday, 8) 9:00-10:20 FSW tools Chair Person: Masakatus Maeda (Osaka University) 9:00-9:20 [Invited] " Friction Stir Welding of 430 Stainless Steel and Pure Titanium using Ni 3 Al-Ni 3 V Dual Two-phase Intermetallic Alloy Tool" Noboru Mochizuki (Isel), Takayuki Takasugi (Osaka Prefecture University), Yasuyuki Kaneno (Osaka Prefecture University), Sachio Oki (Kinki University), Tomotake Hirata (Technology Research Institute of Osaka Prefecture) 9:20-9:40 [Invited] "Tool Geometries and Tool Materials for Friction Stir Welding High Melting Temperature Materials" Scott Packer (MegaStir Technologies) 9:40-10:00 [Invited] "Stationary Shoulder Friction Stir Welding" Jonathan Peter Martin (TWI) 10:00-10:20 "Predicting Tool Longevity using Analytical and Finite Element Modeling of Ti-6Al-4V Friction Stir Welds" Sarah Leigh Baker (University of Birmingham), Moataz Attallah (University of Birmingham), Paul Bowen (University of Birmingham), Simon Bray (Rolls-Royce), Andrew Walpole (Rolls-Royce) 10:40-12:00 General welding Chair Person: Manabu Tanaka (Osaka University) 10:40-11:00 "Optimization of Forming Process by Gas Heating Based on Theoretical Prediction" Juan Blandon (Osaka University), Shinji Takaba (Takadakiko), Tohoru Ohomae (Takadakiko), Naoki Osawa (Osaka University), Hidekazu Murakawa (Osaka University) 11:00-11:20 "Influences of TIG Welding Parameters on Tensile Behavior of Dissimilar Metal Lap Joint for Low Carbon Steel and AA1050" Pasupathy Jagadeeson (Annamalai University), Ravisankar V (Annamalai University) 11:20-11:40 "Dynamic Mesh Refining Method for Welding Simulation of Large Scale Structures" Hui Huang (Osaka University), Hidekazu Murakawa (Osaka University) 11:40-12:00 "Manufacture of Functionally Gradient Materials Using Weld-deposition Based Additive Manufacturing" Suryakumar Simhambhatla (Indian Institute of Technology, Hyderabad), M.A Somashekara (Indian Institute of Technology, Hyderabad) 14
15 TECHNICAL PROGRAM of IJS-JW Poster Presentation- Thursday 7 - November Front of Izumi PS-1 "Basic Numerical Analysis of Friction Stir Welding with a Combination of MPS and FEM" Hisashi Serizawa (Osaka University), Junji Shimazaki (Osaka University), Fumikazu Miyasaka (Osaka University), Gaku Yoshikawa (Osaka University), Hidekazu Murakawa (Osaka University) PS-2 "Numerical Simulation of Material Flow and Temperature Profile in Reverse Dual-Rotation Friction Stir Welding" Chuan Song Wu (Shandong University), Lei Shi (Shandong University) PS-3 "Flexible Control of Microstructure and Mechanical Properties of Friction Stir Welded Titanium Alloy Joints" Yoshiaki Morisada (Osaka University), Kenta Kitamura (Osaka University), Hidetoshi Fujii (Osaka University) PS-4 "Visualization of Metal Flow in Friction Stir Spot Welding with Particle Image Velocimetry (PIV)" Takeshi Yamane (University of Toyama), Hirokazu Watanabe (University of Toyama), Kazuki Nagae (University of Toyama), Toshiya Shibayanagi (University of Toyama), Masamichi Yoshida (University of Toyama) PS-5 "Microstructure and mechanical properties of AZ31 Mg alloy joint by friction stir welding with temperature distribution control" Lu Sheng (Jiangsu University of Science and Technology), Yang Daili (Jiangsu University of Science and Technology) PS-6 "Effect of Friction Stir Welding on Microstructure and Fatigue Properties of Non-Combustive Mg-9Al-Zn-Ca Magnesium Alloy" L. Zhou (Harbin Institute of Technology), K. Nakata (Osaka University), J.C. Feng (Harbin Institute of Technology), J.S. Liao (Kurimoto Ltd), M. Hotta (Kurimoto Ltd) PS-7 "Effect of Friction Stir Processing on Microstructures and Corrosive Properties in Simulated Body Flood of Biological Mg-Zn-Y-Nd Alloy" Shijie Zhu (Zhengzhou University) PS-8 "Friction Stir Welded Cu-30Zn Brass Joints by Rapid Cooling" Nan Xu (Osaka University), Yoshiaki Morisada (Osaka University), Rintaro Ueji (Osaka University), Hidetoshi Fujii (Osaka University) PS-9 "Development of Low-Price Tool for Friction Stir Welding of Pure Titanium" Masahiko Ikeda (Kansai University), Masato Ueda (Kansai University) PS-10 "Hydrogen Embrittlement of Friction Stir Welded SK4 High Carbon Steel Plates" 15
16 PS-11 PS-12 PS-13 PS-14 PS-15 PS-16 PS-17 PS-18 PS-19 PS-20 PS-21 Yufeng Sun (Osaka University), Masashi Watanabe (Osaka University), Yoshiaki Morisada (Osaka University), Hidetoshi Fujii (Osaka University) "Stabilization of Retained Austenite in Cr-Mo Steel by Microalloying and Friction Stir Welding" Takuya Miura (Osaka University), Rintaro Ueji (Osaka University), Yoshiaki Morisada (Osaka University), Hidetoshi Fujii (Osaka University) "Minor Metal Reduction of High Tensile Strength Steel by Friction Stir Welding" Shuo Wu (Osaka University), Yoshiaki Morisada (Osaka University), Hidetoshi Fujii (Osaka University), Chiaki Shiga (Osaka University) "Microstructure of Friction Stir Welded Single Crystal Pure Iron" Rintaro Ueji (Osaka University), Hidetoshi Fujii (Osaka University) "Friction Stir Welding of Multilayered Steel Composites with Improved Strength-Ductility Combination" Shoichi Nambu (The University of Tokyo), Johannes Taendl (Graz University of Technology), Junya Inoue (The University of Tokyo), Norbert Enzinger (Graz University of Technology), Toshihiko Koseki (The University of Toyko) "Improving Bending Fatigue of TIG Welded SS400 Steel Plates using Friction Stir Processing" Tatsuya Okuda (Osaka University), Kazuhiro Ito (Osaka University), Rintaro Ueji (Osaka University), Hidetoshi Fujii (Osaka University), Chiaki Shiga (Osaka University) "Influence of Clamping in Computer Simulation of the Linear Friction Welding Process of Aluminum And Titanium Alloys" Alfiya Yamileva (Ufa State Aviation Technical University), Rafail Gazizov (Ufa State Aviation Technical University) "Possibility of Direct Friction Welding between Type 7075 Aluminum Alloy and Low Carbon Steel" Masaaki Kimura (University of Hyogo), Taiki Yukawa (University of Hyogo), Masahiro Kusaka (University of Hyogo), Koichi Kaizu (University of Hyogo), Akiyoshi Fuji (Kitami Institute of Technology) "Local Alloying between Cu and Zn by Fiction Stir Process" Masato Ueda (Kansai University), Masahiko Ikeda (Kansai University), Yoshiaki Morisada (Osaka University), Hidetoshi Fujii (Osaka University) "Direct Joining of Plastics to Carbon Steel by Friction Lap Joining" Daiki Kitagawa (Osaka University), Kimiaki Nagatsuka (Osaka University), Kazuhiro Nakata (Osaka University) "Microstructural Characterization and Mechanical Properties in Friction Stir Welding of CP-Ti and Steel" Yefei Gao (Osaka University), Kazuhiro Nakata (Osaka University) "Mechanical and Metallurgical Bonding in Friction Stir Welding Joint of Steel-aluminum Dissimilar Materials" 16
17 PS-22 PS-23 PS-24 PS-25 PS-26 PS-27 PS-28 PS-29 PS-30 PS-31 PS-32 Lin Jian (Beijing University of Technology), Lei Yongping (Beijing University of Technology), Ma N inshu (Osaka University), Gao Peng (Beijing University of Technology) "Influence of Tool Rotational Speed on Microstructure and Sliding Wear Behavior of Cu/B 4 C Surface Composite Synthesized by Friction Stir Processing" R. Sathiskumar, (Coimbatore Institute of Technology) "Collision-Friction Synthesis of Carbon Nanomaterials by a High-Speed Ball-Milling Process" Satoshi Ohara (Osaka University), Zhenquan Tan (Osaka University), Kazuhiro Yamamoto (Osaka University), Nan Qiu (Osaka University), Takeshi Hashishin (Osaka University) "Ultrasonic Bonding of Aluminum and Copper Wires in Power Electronics" Masakatsu Maeda (Osaka University), Yasuo Takahashi (Osaka University) "Simulation of Nugget Formation Process in Spot Welding with Process Tapes" Genki Kashiyama (Osaka University), Hidekazu Murakawa (Osaka University) "Wettability and Interfacial Reaction between Sn-Ag-Cu Solder and Electroplated Cu-Based Bulk Metallic Glass" Hiroshi Nishikawa (Osaka University), Takehiro Naoi (Osaka University), Makoto Takahashi (Osaka University), Mikiko Saito (Waseda University), Jun Mizuno (Waseda University), Mikio Fukuhara (Tohoku University) "Arc Welding Power Source Characteristics" Rajiv Vasdev (B.tech in Fabrication and Welding) "Effect of Oxygen in Shielding Gas of Advanced A-TIG (AA-TIG) Welding on Crystallographic Orientation Relationship of Duplex Stainless Steel Weld" Ying Zou (Osaka University), Rintaro Ueji (Osaka University), Hidetoshi Fujii (Osaka University) "Development of High-speed Analytical Method for Welding Mechanics Using Idealized Explicit FEM Accelerated by a GPU" Kazuki Ikushima (Osaka Prefecture University), Atsushi Kawahara (Osaka Prefecture University), Masakazu Shibahara (Osaka Prefecture University) "Three Dimensional In Situ Measurement System for Welding Deformation Using Digital Cameras" Masakazu Shibahara (Osaka Prefecture University), Masaki Hamada (Osaka Prefecture University), Kazuki Ikushima (Osaka Prefecture University) "Study on Residual Stress in Multi-pass Welded Joint using Idealized Explicit FEM" Kazuki Ikushima (Osaka Prefecture University), Takashi Okada (Osaka Prefecture University), Akihiro Takeuchi (Osaka Prefecture University), Shinsuke Itoh (Osaka Prefecture University), Satoru Nishikawa (Japan Power Engineering and Inspection Corporation), Masakazu Shibahara (Osaka Prefecture University) "Stress Corrosion Cracking of Laser-welded Stainless Steels" Chi Tat Kwok (University of Macau), Kin Ho Lo (University of Macau), Weng Kin Chan (University of Macau) 17
Friction Stir Welding of High Carbon Tool Steel (SK85) below Eutectoid Temperature
Friction Stir Welding of High Carbon Tool Steel (SK85) below Eutectoid Temperature CHUNG Young Dong*, FUJII Hidetoshi**, NAKATA Kazuhiro*** and NOGI Kiyoshi*** Abstract The present study is concerned with
More informationDevelopment of Next Generation Resistance Spot Welding Technologies Improving the Weld Properties of Advanced High Strength Steel Sheets
JFE TECHNICAL REPORT No. 20 (Mar. 2015) Development of Next Generation Resistance Spot Welding Technologies Improving the Weld Properties of Advanced High Strength Steel Sheets TANIGUCHI Koichi *1 OKITA
More informationXRD and TEM analysis of microstructure in the welding zone of 9Cr 1Mo V Nb heat-resisting steel
Bull. Mater. Sci., Vol. 25, No. 3, June 2002, pp. 213 217. Indian Academy of Sciences. XRD and TEM analysis of microstructure in the welding zone of 9Cr 1Mo V Nb heat-resisting steel LI YAJIANG*, WANG
More informationJoining of Dissimilar Automotive Materials
Joining of Dissimilar Automotive Materials P.K. Mallick William E. Stirton Professor of Mechanical Engineering Director, Center for Lighweighting Automotive Materials and Processing University of Michigan-Dearborn
More informationMECHANICAL PROPERTIES ON FRICTION STIR WELDING OF ALUMINUM ALLOY 5052
MECHANICAL PROPERTIES ON FRICTION STIR WELDING OF ALUMINUM ALLOY 5052 Rusdi Nur 1, 2, Ahmad Zubair Sultan 1, 2 and Muhammad Arsyad Suyuti 1, 2 1 Department of Mechanical Engineering, Politeknik Negeri
More informationMicrostructural Characteristics and Mechanical Properties of Single-Mode Fiber Laser Lap-Welded Joint in Ti and Al Dissimilar Metals
Transactions of JWRI, Vol.42 (2013), No. 1 Microstructural Characteristics and Mechanical Properties of Single-Mode Fiber Laser Lap-Welded Joint in Ti and Al Dissimilar Metals Su-Jin LEE Su-Jin*, LEE*,
More informationNumerical Simulation of Welding Deformation produced in Compressor Impeller
[Technical Papers] Numerical Simulation of Welding Deformation produced in Compressor Impeller Shinji KOBAYASHI*, Esao YAMADA**, Tetsu GO**, Shigetaka OKANO***, Masahito MOCHIZUKI***, Kenyu KIMURA****,
More informationLap Joint of A5083 Aluminum Alloy and SS400 Steel by Friction Stir Welding
Materials Transactions, Vol. 46, No. 4 (2005) pp. 835 to 841 #2005 The Japan Institute of Metals Lap Joint of A5083 Aluminum Alloy and SS400 Steel by Friction Stir Welding Kittipong Kimapong* and Takehiko
More informationEFFECT OF REINFORCED PARTICULATES (SiC and Al 2 O 3 ) ON FRICTION STIR WELDED JOINT OF MAGNESIUM ALLOY AZ91
International Journal of Scientific & Engineering Research, Volume 6, Issue 4, April-2015 1219 EFFECT OF REINFORCED PARTICULATES (SiC and Al 2 O 3 ) ON FRICTION STIR WELDED JOINT OF MAGNESIUM ALLOY AZ91
More informationCharacteristics of 1180MPa Grade Cold-rolled Steel Sheets with Excellent Formability
Characteristics of 1180MPa Grade Cold-rolled Steel Sheets with Excellent Formability Tadao MURATA *1, Sae HAMAMOTO *1, Yukihiro UTSUMI *1, Takayuki YAMANO *2, Dr. Yuichi FUTAMURA *3, Takayuki KIMURA *4
More informationWear characteristics of a WC Co tool in friction stir welding of AC4AC30 vol%sicp composite
International Journal of Machine Tools & Manufacture 45 (2005) 1635 1639 www.elsevier.com/locate/ijmactool Wear characteristics of a WC Co tool in friction stir welding of AC4AC30 vol%sicp composite H.J.
More informationFriction Stir Welding/Processing Tool Materials and Selection
Friction Stir Welding/Processing Tool Materials and Selection Kudzanayi Chiteka Production engineering, Delhi Technological University, India Abstract Making a choice in selection of friction stir welding/processing
More informationFriction Stir Welding of Iron and Nickel Alloys
Friction Stir Welding of Iron and Nickel Alloys Carl D. Sorensen Brigham Young University Acknowledgements Tool materials and fabrication provided by Megastir Technologies, a business alliance between
More informationFabrication of Ti-Ni-Zr Shape Memory Alloy by P/M Process
Materials Transactions, Vol. 5, No. 1 (29) pp. 2446 to 245 #29 The Japan Institute of Metals Fabrication of Ti-Ni-Zr Shape Memory Alloy by P/M Process Akira Terayama 1, Koji Nagai 2; * and Hideki Kyogoku
More informationWelding Simulation Technologies for Highly Efficient Production of High-quality Social Infrastructure Products
Hitachi Review Vol. 61 (212), No. 6 249 Welding Simulation Technologies for Highly Efficient Production of High-quality Social Infrastructure Products Xudong Zhang, Dr. Eng. Takeshi Tsukamoto, Dr. Eng.
More informationDissimilar Resistance Spot Welding of Aluminum to Magnesium with Zn Coated Steel Interlayers
Dissimilar Resistance Spot Welding of luminum to Magnesium with Zn Coated Steel Interlayers High strength dissimilar l/mg joints can be produced by resistance spot welding with an interlayer Y P. PENNER,
More informationFriction Stir Lap Welding of Magnesium Alloy and Zinc-Coated Steel
Materials Transactions, Vol. 5, No. 11 (29) pp. 2598 to 263 #29 The Japan Institute of Metals Friction Stir Lap Welding of Magnesium Alloy and Zinc-Coated Steel Y. C. Chen* and K. Nakata Joining and Welding
More informationSteel Sheets for Highly Productive Hot Stamping
Steel Sheets for Highly Productive Hot Stamping Sae HAMAMOTO *1, Hiroyuki OMORI *1, Tatsuya ASAI *1, Naoki MIZUTA *2, Noriyuki JIMBO *2, Takayuki YAMANO *2 *1 Sheet Products Development Dept., Research
More informationTensilel Properties of AA6061-T6/SiC p Surface Metal Matrix Composite Produced By Friction Stir Processing
Tensilel Properties of AA6061-T6/SiC p Surface Metal Matrix Composite Produced By Friction Stir Processing Devaraju Aruri, Adepu Kumar & B Kotiveerachary Department of Mechanical Engineering, National
More informationMicrostructure refinement by tool rotation-induced vibration in incremental sheet forming
Available online at www.sciencedirect.com ScienceDirect Procedia Engineering 207 (2017) 795 800 International Conference on the Technology of Plasticity, ICTP 2017, 17-22 September 2017, Cambridge, United
More informationTechnologies for Process Design of Titanium Alloy Forging for Aircraft Parts
Technologies for Process Design of Titanium Alloy Forging for Aircraft Parts Takashi CHODA *1, Dr. Hideto OYAMA *2, Shogo MURAKAMI *3 *1 Titanium Research & Development Section, Titanium Div., Iron & Steel
More informationThe Improvement in Strength of Sintered Machine Parts
[ Technical Article ] The Improvement in Strength of Sintered Machine Parts Takahiro OKUNO* Naoki YASHIRO* Sintered machine parts are used in many industrial fields. Especially, these are widely used for
More informationDevelopment of Next Generation Resistance Spot Welding Technologies Contributing to Auto Body Weight Reduction
Development of Next Generation Resistance Spot Technologies Contributing to Auto Body Weight Reduction JFE TECHNCAL REPORT No. 18 (Mar. 213) MATSUSHTA Muneo *1 TANGUCH Koichi *2 O Kenji *3 Abstract: New
More informationMartensitic Steel Sheets of 1300 and 1500MPa Grades
Martensitic Steel Sheets of 1300 and 1500MPa Grades Yukihiro UTSUMI *1, Atsuhiro SHIRAKI *1, Sae HAMAMOTO *1, Junichiro KINUGASA *2 *1 Sheet Products Development Dept., Research & Development Lab., Iron
More informationChapter 32 Resistance Welding and Solid State Welding. Materials Processing. Classification of Processes. MET Manufacturing Processes
MET 33800 Manufacturing Processes Chapter 32 Resistance Welding and Solid State Welding Before you begin: Turn on the sound on your computer. There is audio to accompany this presentation. Materials Processing
More informationA Study of Influence of Parameters of Dissimilar Materials Joining on Friction Stir Welding Process by Design of Experimental
Proceedings of the 5th IASME/WSEAS Int. Conference on Heat Transfer, Thermal Engineering and Environment, Athens, Greece, August 25-27, 2007 129 A Study of Influence of Parameters of Dissimilar Materials
More informationFinal Examination. Instructions. Guidelines. UNIVERSITY OF CALIFORNIA College of Engineering Department of Materials Science & Engineering
UNIVERSITY OF CALIFORNIA College of Engineering Department of Materials Science & Engineering Spring Semester 2006 Professor R. Gronsky MSE 121 Name (Please Print) Final Examination Instructions Please
More informationIndex. Atmosphere Effect on fatigue processes, 49, 200 Auger spectroscopy, 51 A533-B steel Mode II fracture, 235, 242 B
STP600-EB/Jun. 1976 Index Abrasion Due to crack closure, 228 On Mode II fractures, 240 AgaMg-AgMg alloys, 160, 166 AISI 1025 steel Hydrogen attack, 88 Microstructure of, 91 Tensile properties, 90 AISI
More informationDevelopment of Abrasion-resistant Pipe (NK-SL80) for Slurry Transportation Systems
Development of Abrasion-resistant Pipe () for Slurry Transportation Systems Akira Tohyama*, Tatsuo Takaoka*, Hidetoshi Furukawa**, Hidenori Hori***, Toshihiko Fukui**** and Yusuke Minami***** * Manager-Specialty
More informationWeldability Analysis of 316 Stainless Steel and AA1100 Alloy Hollow Tubes using Rotational Friction Welding Process
ISSN (Online): 9-7064 Index Copernicus Value (0): 6.4 Impact Factor (05): 6.9 Weldability Analysis of 6 Stainless Steel and AA00 Alloy Hollow Tubes using Rotational Friction Welding Process Y. Lekhana,
More informationJoining as an Enabling Technology for Mainstream Vehicle Lightweighting
Joining as an Enabling Technology for Mainstream Vehicle Lightweighting March 17, 2015 Jerry E. Gould LIFT: Technology Pillar Leader, Joining and Assembly EWI: Technology Leader, Resistance and Solid State
More informationMicrostructural Development in Friction Welded AZ31 Magnesium Alloy
Materials Transactions, Vol. 47, No. 4 (2006) pp. 1071 to 1076 Special Issue on Platform Science and Technology for Advanced Magnesium Alloys, III #2006 The Japan Institute of Metals Microstructural Development
More informationWelding Solutions for Advanced High-Strength Steels Menachem Kimchi 1
Welding Solutions for Advanced High-Strength Steels Menachem Kimchi 1 A. Peer 1, Y. Lu 1, W. Zhang 1, C. Ji 2, Y. Park 2, T. Abke 3, S. Malcom 3 1 The Ohio State University, 2 Dong-Eui University, 3 Honda
More informationThe Microstructure and Mechanical Properties of Inconel 718 Fine Grain Ring Forging
The Microstructure and Mechanical Properties of Inconel 718 Fine Grain Ring Forging Zixing Wang 1, Dianhua Zhou 1, Qun Deng 2, Guosheng Chen 1, Wei Xie 1 1 Special Steel R & D Center of Special Steel Business
More informationEVALUATION OF MECHANICAL PROPERTIES OF FRICTION WELDED JOINTS OF EN-24 STEEL CYLINDRICAL RODS
Research Paper ISSN 227 049 www.ijmerr.com Vol. 3, No. 4, October, 204 204 IJMERR. All Rights Reserved EVALUATION OF MECHANICAL PROPERTIES OF FRICTION WELDED JOINTS OF STEEL CYLINDRICAL RODS G Samuthiram
More informationDetection of Sensitization for 600 Alloy and Austenitic Stainless Steel by Magnetic Field Sensor
19 th World Conference on Non-Destructive Testing 16 Detection of Sensitization for 6 Alloy and Austenitic Stainless Steel by Magnetic Field Sensor Hiroaki KIKUCHI 1, Hiroki YANAGIWARA 1, Hideki TAKAHASHI
More informationHot Deformation Behavior of High Strength Low Alloy Steel by Thermo Mechanical Simulator and Finite Element Method
IOP Conference Series: Materials Science and Engineering PAPER OPEN ACCESS Hot Deformation Behavior of High Strength Low Alloy Steel by Thermo Mechanical Simulator and Finite Element Method To cite this
More informationBrazing of copper to stainless steel with a lowsilver-content
IOP Conference Series: Materials Science and Engineering OPEN ACCESS Brazing of copper to stainless steel with a lowsilver-content brazing filler metal To cite this article: Tatsuya Fukikoshi et al 2014
More informationUNCLASSIFIED/UNLIMITED. Ultrasonic Consolidation : Status Report on Development of Solid State Net Shape Processing for Direct Manufacturing
of Solid State Net Shape Processing for Direct Manufacturing ABSTRACT Dr. Dawn R. White Solidica, Inc. 3941 Research Park Drive, Ste. C Ann Arbor, MI 48108 USA dawn@solidica.com Ultrasonic Consolidation
More informationAnnealing Effect on Mechanical Properties of Ti-Al Alloy/Pure Ti Harmonic-Structured Composite by MM/SPS Process
IOP Conference Series: Materials Science and Engineering OPEN ACCESS Annealing Effect on Mechanical Properties of Ti-Al Alloy/Pure Ti Harmonic-Structured Composite by MM/SPS Process To cite this article:
More informationEffect of Low Feed Rate FSP on Microstructure and Mechanical Properties of Extruded Cast 2285 Aluminum Alloy
614 J. Mater. Sci. Technol., Vol.23 No.5, 2007 Effect of Low Feed Rate FSP on Microstructure and Mechanical Properties of Extruded Cast 2285 Aluminum Alloy L.Karthikeyan 1), V.S.Senthilkumar 2), D.Viswanathan
More informationResidual Stress Measurement Techniques: A Review
Residual Stress Measurement Techniques: A Review Nasir Khan 1, Research Scholar Amity University, Gwalior Dr. Anshul Gangele 2 Professor, Amity University Gwalior Abstract Compressive residual stresses
More informationRoll Bonding or Roll Welding
1 2 3 4 Roll Bonding or Roll Welding The pressure required for welding is applied through a pair of rolls Can be performed hot (Hot Roll Bonding) Surface preparation is important for interfacial bonding
More informationHypereutectic aluminium alloy tubes with graded distribution of Mg Si particles prepared by centrifugal casting
Ž. Materials and Design 1 000 149 153 Hypereutectic aluminium alloy tubes with graded distribution of Mg Si particles prepared by centrifugal casting Jian Zhang a,b,, Zhongyun Fan a, Yuqing Wang b, Benlian
More informationTECHNIQUES FOR IMPROVING THE WELDABILITY OF TRIP STEEL USING RESISTANCE SPOT WELDING. G Shi and S A Westgate TWI Ltd, Cambridge, United Kingdom
TECHNIQUES FOR IMPROVING THE WELDABILITY OF TRIP STEEL USING RESISTANCE SPOT WELDING G Shi and S A Westgate TWI Ltd, Cambridge, United Kingdom ABSTRACT High strength steels (UTS >6N/mm 2 ) are increasingly
More informationStainless Steel & Stainless Steel Fasteners Chemical, Physical and Mechanical Properties
Stainless Steel & Stainless Steel Fasteners Chemical, Physical and Mechanical Properties Stainless steel describes a family of steels highly resistant to tarnishing and rusting that contain at least two
More informationMicrostructure Study of Diffusion Bonding of Centrifuged Structural Steel-Bronze
ARCHIVES of FOUNDRY ENGINEERING DOI: 10.1515/afe-2016-0034 Published quarterly as the organ of the Foundry Commission of the Polish Academy of Sciences ISSN (2299-2944) Volume 16 Issue 2/2016 99 104 Microstructure
More informationSolid-State Welding Processes
Solid-State Welding Processes Text Reference: Manufacturing Engineering and Technology, Kalpakjian & Schmid, 6/e, 2010 Chapter 31 Solid-State State Welding Processes Joining takes place without fusion
More informationNewly-Developed Ultra-High Tensile Strength Steels with Excellent Formability and Weldability
JFE TECHNICAL REPORT No. 10 (Dec. 2007) Newly-Developed Ultra-High Tensile Strength Steels with Excellent Formability and Weldability MATSUOKA Saiji *1 HASEGAWA Kohei *2 TANAKA Yasushi *3 Abstract: has
More informationIntergranular Corrosion (IGC)
Intergranular Corrosion (IGC) Microstructure of metals and alloys is made up of grains (separated by grain boundaries) Intergranular corrosion is a localized attack along the grain boundaries, or immediately
More informationDevelopment of Materials for Use in A-USC Boilers
27 Development of Materials for Use in A-USC Boilers NOBUHIKO SAITO *1 NOBUYOSHI KOMAI *2 YASUO SUMIYOSHI *3 YASUHIRO TAKEI *4 MASAKI KITAMURA *4 TSUYOSHI TOKAIRIN *4 The 700 C-class advanced ultra-supercritical
More informationINFLUENCE OF FRICTION STIR WELDING ON CORROSION PROPERTIES OF AW-7020M ALLOY IN SEA WATER
DOI: 10.1515/adms-2015-0002 K. Dudzik 1, W. Jurczak 2 1 Gdynia Maritime University, Faculty of Marine Engineering, Marine Maintenance Department, Gdynia, Poland 2 Polish Naval Academy, Mechanical Electrical
More informationY. Zhou, X. Zhou, Q. Teng, Q.S. Wei, Y.S. Shi
Investigation on the scan strategy and property of 316L stainless steel-inconel 718 functionally graded materials fabricated by selective laser melting Y. Zhou, X. Zhou, Q. Teng, Q.S. Wei, Y.S. Shi State
More informationA Study on the Powder Forging of Aluminum Alloy Pistons
International Journal of the Korean Society of Precision Engineering Vol. 2, No. 4, November 2001. A Study on the Powder Forging of Aluminum Alloy Pistons Jong-Ok Park 1,Chul-WooPark 1 and Young-Ho Kim
More informationEXPERIMENTAL INVESTIGATIONS ON TIG WELDING OF ALUMINIUM 6351 ALLOY
EXPERIMENTAL INVESTIGATIONS ON TIG WELDING OF ALUMINIUM 6351 ALLOY * Venkata Ramana M 1, Sriram P S N 2 and Jayanthi A 3 Department of Automobile Engineering, VNR Vignana Jyothi Institute of Engineering
More informationTHE APPLICATION OF FRICTION STIR WELDING (FSW) OF ALUMINIUM ALLOYS IN SHIPBUILDING AND RAILWAY INDUSTRY
Journal of KONES Powertrain and Transport, Vol. 24, No. 2 2017 THE APPLICATION OF FRICTION STIR WELDING (FSW) OF ALUMINIUM ALLOYS IN SHIPBUILDING AND RAILWAY INDUSTRY Grzegorz Gesella, Mirosław Czechowski
More informationWelding Processes. Consumable Electrode. Non-Consumable Electrode. High Energy Beam. Fusion Welding Processes. SMAW Shielded Metal Arc Welding
Fusion Consumable Electrode SMAW Shielded Metal Arc Welding GMAW Gas Metal Arc Welding SAW Submerged Arc Welding Non-Consumable Electrode GTAW Gas Tungsten Arc Welding PAW Plasma Arc Welding High Energy
More informationMicrostructural and Textural Evolution by Continuous Cyclic Bending and Annealing in a High Purity Titanium
Materials Transactions, Vol. 45, No. 9 (24) pp. 2826 to 2831 #24 The Japan Institute of Metals Microstructural and Textural Evolution by Continuous Cyclic Bending and Annealing in a High Purity Titanium
More informationEffect of Process Parameters & Tool Geometries on Properties of Friction Stir Spot Welds: A Review
Universal Journal of Engineering Science 3(1): 6-11, 2015 DOI: 10.13189/ujes.2015.030102 http://www.hrpub.org Effect of Process Parameters & Tool Geometries on Properties of Friction Stir Spot Welds: A
More informationEffect Of Friction Stir Processing On Mechanical Properties And Microstructure Of The Cast Pure Aluminum
INTERNATIONAL JOURNAL OF SCIENTIFIC & TECHNOLOGY RESEARCH VOLUME 2, ISSUE 12, DECEMBER 2013 ISSN 2277-8616 Effect Of Friction Stir Processing On Mechanical Properties And Microstructure Of The Cast Pure
More informationInfluence of Rolling Temperature on Microstructure and Mechanical Properties of Cryorolled Al-Mg-Si alloy
Influence of Rolling Temperature on Microstructure and Mechanical Properties of Cryorolled Al-Mg-Si alloy B. Gopi, N. Naga Krishna, K. Venkateswarlu, K. Sivaprasad Abstract An effect of rolling temperature
More informationNUMERICAL SIMULATION OF FRICTION STIR BUTT WELDING PROCESSES FOR AZ91 MAGNESIUM ALLOY
NUMERICAL SIMULATION OF FRICTION STIR BUTT WELDING PROCESSES FOR AZ91 MAGNESIUM ALLOY K. Senthil Kumar 1, M. Sivasangari 2, V. Rubesh Raj 3, L. Nirmal Raj 4 1 Assistant Professor, MAR College of Engg &
More informationResistance Spot Welding of AA5052 Sheet Metal of Dissimilar Thickness
IOP Conference Series: Materials Science and Engineering PAPER OPEN ACCESS Resistance Spot Welding of AA5052 Sheet Metal of Dissimilar Thickness To cite this article: N A Mat Din et al 2016 IOP Conf. Ser.:
More informationCold Roll Forming of Circular Tube Section for Wrought Magnesium Alloy Sheet
Cold Roll Forming of Circular Tube Section for Wrought Magnesium Alloy Sheet Hisaki Watari, Hidemitsu Hamano, Shi-ichi Nishida, and Shun-suke Kanai Abstract The growing demand for light weight products
More informationEffect of Sheet Thickness and Type of Alloys on the Springback Phenomenon for Cylindrical Die
AMERICAN JOURNAL OF SCIENTIFIC AND INDUSTRIAL RESEARCH 01, Science Huβ, http://www.scihub.org/ajsir ISSN: 153-69X, doi:10.551/ajsir.01.3.6.80.86 Effect of Sheet Thickness and Type of Alloys on the Springback
More informationEFFECT OF GROOVE SIZE ON MECHANICAL PROPERTIES AND MICROSTRUCTURE DUE TO REINFORCEMENT ADDITION IN FRICTION STIR WELDED DISSIMILAR ALLOYS
EFFECT OF GROOVE SIZE ON MECHANICAL PROPERTIES AND MICROSTRUCTURE DUE TO REINFORCEMENT ADDITION IN FRICTION STIR WELDED DISSIMILAR ALLOYS Ravinder Reddy Baridula 1, Ramgopal Varma Ramaraju 2, Che Ku Mohammad
More informationFriction stir welding of structural steel S235 and S355
Friction stir welding of structural steel S235 and S355 R. Szabo 1), L. Bergmann 2), J. dos Santos 2) 1) University Politehnica Timisoara, Faculty for Civil Engineering, 2) Helmholtz-Zentrum Geesthacht
More informationParametric Optimization for Friction Stir Welding of Al6061 Alloy using Taguchi Technique
Parametric Optimization for Friction Stir Welding of Al6061 Alloy using Taguchi Technique Lingam Satyavinod 1, R Harikishore 2 1 Student, Department of Mechanical Engineering, DNREng College, Bhimavaram,
More informationSurface Morphology and Mechanical Properties. of Aluminum-Copper Joints Welded. by Friction Stir Welding
Contemporary Engineering Sciences, Vol. 7, 2014, no. 5, 219-230 HIKARI Ltd, www.m-hikari.com http://dx.doi.org/10.12988/ces.2014.31167 Surface Morphology and Mechanical Properties of Aluminum-Copper Joints
More informationMicrostructural Evolution of Ti-Mo-Ni-C Powder by Mechanical Alloying
Materials Transactions, Vol. 50, No. 1 (2009) pp. 117 to 122 #2009 The Japan Institute of Metals Microstructural Evolution of -Mo-Ni-C Powder by Mechanical Alloying Hiroyuki Hosokawa, Kiyotaka Kato, Koji
More informationAluminum foil reinforced by carbon nanotubes
NANOSYSTEMS: PHYSICS, CHEMISTRY, MATHEMATICS, 2016, 7 (1), P. 185 189 Aluminum foil reinforced by carbon nanotubes A. V. Alekseev 1, M. R. Predtechenskiy 2 1 International Science Centre of Thermal physics
More informationNIPPON STEEL TECHNICAL REPORT No. 88 July Yasuharu SAKUMA* 1 Hatsuhiko OIKAWA* 2
NIPPON STEEL TECHNICAL REPORT No. 88 July 23 UDC 669. 14. 18. 29-4 : 621. 791.763. 1. 11 Factors to Determine Static Strengths of Spot-weld for High Strength Steel Sheets and Developments of High-strength
More informationOPTIMIZATION OF WELDING PARAMETER ON AA2014 IN GMAW
OPTIMIZATION OF WELDING PARAMETER ON AA2014 IN GMAW P.Venkadeshwaran 1*, R.Sakthivel 1, R.Sridevi 1, R.Ahamed Meeran 1, K.Chandrasekaran 1 1 Department of Mechanical Engineering, Nadar Saraswathi College
More informationFatigue life estimation of Aluminium Alloy reinforced with SiC particulates in annealed conditions
18 TH INTERNATIONAL CONFERENCE ON COMPOSITE MATERIALS Abstract Fatigue life estimation of Aluminium Alloy reinforced with SiC particulates in annealed conditions D. P. Myriounis, S.T.Hasan Sheffield Hallam
More informationFinite element analysis of residual stress in the welded zone of a high strength steel
Bull. Mater. Sci., Vol. 27, No. 2, April 2004, pp. 127 132. Indian Academy of Sciences. Finite element analysis of residual stress in the welded zone of a high strength steel LI YAJIANG*, WANG JUAN, CHEN
More informationTHE IMPORTANCE OF FRICTION STIR WELDING TOOL
Production Processes and Systems, vol. 6. (2013) No. 1., pp. 25-34. THE IMPORTANCE OF FRICTION STIR WELDING TOOL Ákos Meilinger, Imre Török University of Miskolc, Department of Mechanical Technology Abstract
More informationrelated to the welding of aluminium are due to its high thermal conductivity, high
Chapter 7 COMPARISON FSW WELD WITH TIG WELD 7.0 Introduction Aluminium welding still represents a critical operation due to its complexity and the high level of defect that can be produced in the joint.
More informationAdvances in Solid-State Joining at EWI
Advances in Solid-State Joining at EWI Jerry E. Gould Technology Leader Resistance and Solid-State Joining ph: 614-688-5121 e-mail: jgould@ewi.org Brian Thompson Applications Engineer Friction Stir Welding
More information71T1 - Gas Shielded Flux Cored Welding Wire Provides excellent performance in all position welding. Weld Metal - Chemistry
Flux Cored Wire 71T1 - Gas Shielded Flux Cored Welding Wire Provides excellent performance in all position welding Description: Provides a stable arc, low spatter, easy to remove slag, and neat weld metal.
More informationAdvances in steel and Al alloy materials High strength (HSS) & Advanced high strength steel (AHSS)
Advances in steel and Al alloy materials High strength (HSS) & Advanced high strength steel (AHSS) Low strength steel HSS UHSS Development of new steel grade materials that can withstand more strength
More informationEffects of Bi Content on Mechanical Properties and Bump Interconnection Reliability of Sn-Ag Solder Alloys
Effects of Bi Content on Mechanical Properties and Bump Interconnection Reliability of Sn-Ag Solder Kazuki Tateyama, Hiroshi Ubukata*, Yoji Yamaoka*, Kuniaki Takahashi*, Hiroshi Yamada** and Masayuki Saito
More informationDevelopment for Material and Application Technique of Stainless Steel Line Pipes
Technical Report NIPPON STEEL & SUMITOMO METAL TECHNICAL REPORT No. 107 FEBRUARY 2015 UDC 669. 14. 018. 8-462. 2 : 622. 692. 4 Development for Material and Application Technique of Stainless Steel Line
More informationFerrous Alloys. Metal Alloys. Ferrous. Non ferrous. Grey iron. Carbon Low Alloy High Alloy. Nodular iron White iron Malleable iron Alloy cast irons
Metal Alloys Most engineering metallic materials are alloys. Metals are alloyed to enhance their properties, such as strength, hardness or corrosion resistance, and to create new properties, such as shape
More informationThese elements are in carbon steels in minimal amounts, usually less than 1%.
Alloy Steels Weld Tech News VOL 1. NO. 11 WELD TECH NEWS is a newsletter for welders working primarily in maintenance and repair. Each issue contains useful information on materials (cast irons, steels,
More informationCorrelations between IMC thickness and three factors in Sn-3Ag-0.5Cu alloy system
Correlations between IMC thickness and three factors in Sn-3Ag-0.5Cu alloy system MENG Gong-ge( 孟工戈 ) 1, T. Takemoto 2, H. Nishikawa 2 1. College of Materials Science and Engineering, Harbin University
More informationThe effect of ER4043 and ER5356 filler metal on welded Al 7075 by metal inert gas welding
This paper is part of the Proceedings of the 2 International Conference on nd High Performance and Optimum Design of Structures and Materials (HPSM 2016) www.witconferences.com The effect of ER4043 and
More informationEFFECT OF EXTRUSION PARAMETERS AND DIE GEOMETRY ON THE PRODUCED BILLET QUALITY USING FINITE ELEMENT METHOD
EFFECT OF EXTRUSION PARAMETERS AND DIE GEOMETRY ON THE PRODUCED BILLET QUALITY USING FINITE ELEMENT METHOD A.Ε. Lontos 1, F.A. Soukatzidis 2, D.A. Demosthenous 1, A.K. Baldoukas 2 1. Mechanical Engineering
More informationHeat-Treat Rack Material Selection Based on Thermal Performance
Industrial Heating Magazine, Heat & Corrosion Resistant Materials/Composites December 3, 2015 Heat-Treat Rack Material Selection Based on Thermal Performance The choice of heat-treat rack material is important
More informationMMPDS January 2003 CHAPTER 5 TITANIUM
CHAPTER 5 TITANIUM 5.1 GENERAL This chapter contains the engineering properties and related characteristics of titanium and titanium alloys used in aircraft and missile structural applications. General
More informationMATERIAL CHARACTERISTIC STUDY OF COLD ROLLED GRADED THIN SHEET BY USING TIG WELDING PROCESS FOR RAIL COACHES
MATERIAL CHARACTERISTIC STUDY OF COLD ROLLED GRADED THIN SHEET BY USING TIG WELDING PROCESS FOR RAIL COACHES S. Ravikumar 1, J. Vishal 1, K. Vigram and A. N. Ganesh Babu 2 1 Department of Mechanical Engineering,
More informationThe Recrystallization of Microelectronic Lead-Free Solders
Materials Transactions, Vol. 49, No. 10 (2008) pp. 2298 to 2302 #2008 The Japan Institute of Metals The Recrystallization of Microelectronic Lead-Free Solders Fei-Yi Hung 1; *, Truan-Sheng Lui 2; *, Li-Hui
More informationTable 1 El. Steel Category TS grade MPa MPa 980MPa GA980Y 724 1,022 Developed steel Galvannealed 780MPa GA780Y MPa CR980Y 690 1,030
With growing awareness of global environmental issues, automobile manufacturers are striving to reduce automotive weight and thus decrease exhaust emissions. Concurrently, automakers are pursuing higher
More informationThe Interaction between Hydrogen and Surface Stress in Stainless Steel
The Interaction between Hydrogen and Surface Stress in Stainless Steel O. Takakuwa, Y. Mano, H. Soyama Abstract This paper reveals the interaction between hydrogen and surface stress in austenitic stainless
More informationEffect of Full Annealing PWHT on a Long -term Creep Strength of 2.25Cr-1Mo Steel Welded Joint
Effect of Full Annealing PWHT OMMI (Vol. 2, Issue 2) Aug. 2003 www.ommi.co.uk Effect of Full Annealing PWHT on a Long -term Creep Strength of 2.25Cr-1Mo Steel Welded Joint Kazuhiro Kimura, Takashi Watanabe,
More informationEvaluation of Microstructure, Mechanical and Wear Properties of Aluminium Reinforced with Boron Carbide Nano Composite
Indian Journal of Science and Technology, Vol 9(20), DOI: 10.17485/ijst/2016/v9i20/84294, May 2016 ISSN (Print) : 0974-6846 ISSN (Online) : 0974-5645 Evaluation of Microstructure, Mechanical and Wear Properties
More informationCrystallographic Orientation Relationship between Discontinuous Precipitates and Matrix in Commercial AZ91 Mg Alloy
Materials Transactions, Vol. 52, No. 3 (2011) pp. 340 to 344 Special Issue on New Trends for Micro- and Nano Analyses by Transmission Electron Microscopy #2011 The Japan Institute of Metals Crystallographic
More informationINTRODUCTION. Think HSS
INTRODUCTION Think HSS SUMMARY METALLURGY 2 Excellent strength 3 A super sharp edge 4 Safe and reliable tools Alloy elements 6 The influence of alloy elements 7 Standard compositions of HSS 8 The HSS-PM
More information