26-27 PA 6, PA6.6, PA6.6 30GF

Size: px

Start display at page:

Download "26-27 PA 6, PA6.6, PA6.6 30GF"

Eugene Wilkins
6 years ago
Views:

N A M I L E N P L A 04-07 MC NYLON 08-09 POM 10-11 HDPE, PE-UHMW 12-13 PP 14-15 ABS

2 N A M I L E N P L A MC NYLON POM HDPE, PE-UHMW PP ABS PVC PPE, PPE-30GF PA 6, PA6.6, PA6.6 30GF PET PVDF, E-CTFE

www.namilenpla.co.kr Namil Enpla Co., Ltd.

Our products by casting and extrusion have been already recognized for the quality and we are continuously trying to develop new products.

3 Namil Enpla Co., Ltd. as one of the leading suppliers in semifinished engineering plastics, was found in 1990 and has been producing rods and sheets for machining ever since. Our products by casting and extrusion have been already recognized for the quality and we are continuously trying to develop new products. Based on our accumulated technology and experiences in the industry, we aim to give full satisfaction to all our customers in the market with semi-finished engineering plastics and will be also coitted to meet all our customers' demands. S E M I - F I N I S H E D E N G I N E E R I N G P L A S T I C S PC UNILATE 20 PTFE Products PSU, PPSU, PEI 34 PEEK 37-43

CAST NYLON CAST POLYAMIDE 6 www.namilenpla.co.

polyamide 6 by injection or extrusion. By the addition of various additives such as colorants, MoS2, oil, lubricants and antistatic agent, the properties can be reinforced.

4 CAST NYLON CAST POLYAMIDE 6 Cast nylons produced by the anionic polymerization of caprolactam cover a wide range of applications and have improved mechanical, thermal and chemical resistance properties compared with polyamide 6 by injection or extrusion. By the addition of various additives such as colorants, MoS2, oil, lubricants and antistatic agent, the properties can be reinforced. Properties High mechanical strength High stiffness, hardness and toughness Self-lubricating Excellent wear resistance. Good machinability Good electrical insulating properties Good chemical resistance Applications Gear, rollers, bushing, screws Conveyor rollers, steel industry Part for the textile and construction industry Grade Cast nylon Cast nylon + MoS2 Cast nylon + Oil Cast nylon + Wax Cast nylon Lube Cast nylon + GF Cast nylon,,,, Cast nylon Cast nylon + MoS2 Cast nylon + Oil Cast nylon + Wax Cast nylon Lube Cast nylon + GF Cast nylon AST blue, natural, black dark grey green, yellow light grey red black black, white 04 >> 05 l NAMIL ENPLA

5 NAMIL CAST NYLON blue, natural, black CAST NYLON + MoS2 dark grey CAST NYLON + Oil green, yellow CAST NYLON + WAX light grey CAST NYLON LUBE red CAST NYLON + GF black CAST NYLON AST black, white CAST NYLON POM HDPE, PE-UHMW PP ABS PC UNILATE PTFE PVC PPE, PPE-30GF PA 6, PA6.6 PET PVDF, E-CTFE PSU, PPSU, PEI PEEK

CAST NYLON www.namilenpla.co.kr NAMIL CAST NYLON RODS standard length tol. of diameter weight Min Max kg/m ex stock 30 0.85 35 1.15 40 1.51 45 1.91 50 2.36 55 2.85 60 3.39 +0.5 +1.0 65 3.98 70 4.

6 CAST NYLON NAMIL CAST NYLON RODS standard length tol. of diameter weight Min Max kg/m ex stock >> 07 l NAMIL ENPLA

7 CAST NYLON NAMIL NAMIL CAST NYLON SHEETS 5 tol. of thickness Min. Max. kg/m ex stock kg/m ex stock kg/m ex stock kg/m ex stock CAST NYLON POM HDPE, PE-UHMW PP ABS PC UNILATE PTFE PVC PPE, PPE-30GF PA 6, PA6.6 PET PVDF, E-CTFE PSU, PPSU, PEI PEEK

machining and better thermal stability and stronger resistance to alkalis than acetal homopolymer.

8 POM POLYOXYMETHYLENE Polyoxymethylene, copolymer grade, is a crystalline polymer and can be used in temperature up to +100 The copolymer grade has excellent mechanical features, stability to humidity and easy of machining and better thermal stability and stronger resistance to alkalis than acetal homopolymer. Properties High mechanical strength and rigidity Fatigue resistance and good resistance to creep Good sliding properties and wear resistance Excellent dimensional Good electrical insulating and dielectric properties Excellent machinability Not resistant to high concentrated acids Difficult to glue and paint Applications Heavily loaded bearings, gear, parts for pump. Dimensionally stable precision parts. Screws, parts for the textile. Components for chemical plants. Electrically insulating components. POM-ELS (electrically conductive) POM-ESD (antistatic) POM-TX POM-FL POM-ET black POM-ES natural 08 >> 09 l NAMIL ENPLA

9 POM NAMIL NAMIL POM RODS NAMIL POM SHEETS tol. of diameter tol. of diameter POM-C POM-ELS* POM-ESD* Min. Max. Min. Max. kg/m kg/m kg/m tol. of thickness POM-C tol. of thickness POM-ELS* POM-ESD* Min. Max. kg/m kg/m Min. Max. kg/m kg/m CAST NYLON POM HDPE, PE-UHMW PP ABS PC UNILATE PTFE PVC PPE, PPE-30GF PA 6, PA6.6 PET PVDF, E-CTFE PSU, PPSU, PEI PEEK

The operating temperature is from -50 to +90 Properties low specific gravity high elongation very good electrical and dielectric properties very low water

10 HDPE POLYETHYLENE PE-UHMW GUR Polyethylene has a good chemical resistance to almost all acids and bases, detergents and hot water. It has good insulation properties as well and is easy to weld. The operating temperature is from -50 to +90 Properties low specific gravity high elongation very good electrical and dielectric properties very low water absorption Excellent chemical resistance food safe High impact strength, even at low temperatures Applications waste water disposal industry pumps and valve parts components for the food industry conveyor screws PE-UHMW PE-UHMW AST PE-UHMW+Boron 10 >> 11 l NAMIL ENPLA

11 HDPE, PE-UHMW NAMIL NAMIL HDPE, PE-UHMW RODS tol. of diameter HDPE PE-UHMW** Min. Max. kg/m kg/m NAMIL HDPE, PE-UHMW SHEETS tol. of thickness Min. HDPE PE-UHMW** Max. kg/m kg/m kg/2m CAST NYLON POM HDPE, PE-UHMW PP ABS PC UNILATE PTFE PVC PPE, PPE-30GF PA 6, PA6.6 PET PVDF, E-CTFE PSU, PPSU, PEI PEEK

PP POLYPROPYLENE www.namilenpla.co.kr Polypropylene shows a high mechanical strength and a tensile strength, but a low notched impact strength.ä The mechanical features are better than those of HDPE.

12 PP POLYPROPYLENE Polypropylene shows a high mechanical strength and a tensile strength, but a low notched impact strength.ä The mechanical features are better than those of HDPE. It is easy to weld. At minus temperature it can get brittle. The chemical and electrical properties are very good. The continuous operating temperatures ranges between +5 and +100 Properties low weight resistant to many chemical solvents, bases and acids high heat resistance high tensile strength, high surface strength good dielectric properties food safe Applications pumps, valves, gaskets components for the chemical industry components for the food industry bearing PP-30GF(HiPro ) PP ELS 12 >> 13 l NAMIL ENPLA

13 PP NAMIL NAMIL PP RODS tol. of diameter PP PP-30GF* PP-ELS* Min. Max. kg/m kg/m kg/m NAMIL PP SHEETS tol. of thickness Min. PP PP-30GF* Max. kg/m kg/m kg/m CAST NYLON POM HDPE, PE-UHMW PP ABS PC UNILATE PTFE PVC PPE, PPE-30GF PA 6, PA6.6 PET PVDF, E-CTFE PSU, PPSU, PEI PEEK

ABS ACRYLONITRILE BUTADIENE STYRENE COPOLYMER ABS is thermoplastic resin made from three-dimensional monomer of Acrylonitrile, Butadiene, Styrene.

14 ABS ACRYLONITRILE BUTADIENE STYRENE COPOLYMER ABS is thermoplastic resin made from three-dimensional monomer of Acrylonitrile, Butadiene, Styrene. It has a wide range of applications such as electric/electronic parts, automotive parts and so on. It is strong shows a good scratch resistance and has a good dimensional stability. ABS can be used in temperatures ranging from -50 to +70 Properties good mechanical strength and hardness resists scratching high surface strength high impact strength high dimensional stability Applications components for the food and refrigeration industry modeling 14 >> 15 l NAMIL ENPLA

15 ABS NAMIL NAMIL ABS RODS NAMIL ABS SHEETS tol. of diameter Min. Max. tol. of thickness ABS kg/m ABS Min. Max. kg/m kg/m CAST NYLON POM HDPE, PE-UHMW PP ABS PC UNILATE PTFE PVC PPE, PPE-30GF PA 6, PA6.6 PET PVDF, E-CTFE PSU, PPSU, PEI PEEK

PC POLYCARBONATE www.namilenpla.co.kr Polycarbonate is a thermoplastic polymer and shows a high rigidity and an very high impact strength. The operating temperature ranges from -60 to approx.

16 PC POLYCARBONATE Polycarbonate is a thermoplastic polymer and shows a high rigidity and an very high impact strength. The operating temperature ranges from -60 to approx Properties very high impact strength high mechanical strength high dimensional stability high temperature resistance good insulating properties high resistance to radiation Applications Insulators, sight glasses PC +GF 16 >> 17 l NAMIL ENPLA

17 PC NAMIL NAMIL PC RODS NAMIL PC SHEETS tol. of diameter Min. tol. of thickness Min. Max. Max. PC kg/m PC kg/m PC +GF kg/m CAST NYLON POM HDPE, PE-UHMW PP ABS PC UNILATE PTFE PVC PPE, PPE-30GF PA 6, PA6.6 PET PVDF, E-CTFE PSU, PPSU, PEI PEEK

18 UNILATE POLYETHYLENETEREPHTHALATE PC NC SC 18 >> 19 l NAMIL ENPLA

19 UNILATE NAMIL Type-standard thickness() Color Specification code Standard dimensions Minimum packaging UNIT PC-0.5 N sheets PC-0.6 B sheets PC-0.8 B sheets PC-1 N.B.W sheets PC-1.2 N sheets PC-1.6 N sheets PC-2 N.B sheets PC-3 N.B sheets PC-4 N.B sheets PC-5 N.B sheets PC-6 N.B sheets PC-8 N.B sheets PC-10 N.B.W sheets PC-12 N.B sheet PC-15 N.B.W sheet PC-20 N.B.W sheet PC-25 N.B sheet PC-30 N.B sheet PC-35 N.B sheet PC-40 N.B sheet PC-45 N.B sheet PC-50 N.B sheet PC-55 N.B sheet Standard Minimum Type-standard Specification Color dimensions packaging thickness() code UNIT PCA-0.5 N sheets PCA-0.6 B sheets PCA-0.8 B sheets PCA-1 N.B.W sheets PCA-1.2 N sheets PCA-1.6 N sheets PCA-2 N.B sheets PCA-3 N.B sheets PCA-4 N.B sheets PCA-5 N.B sheets PCA-6 N.B sheets PCA-8 N.B sheets PCA-10 N.B.W sheets PCA-12 N.B sheet PCA-15 N.B.W sheet PCA-20 N.B.W sheet PCA-25 N.B sheet PCA-30 N.B sheet PCA-35 N.B sheet PCA-40 N.B sheet PCA-45 N.B sheet PCA-50 N.B sheet PCA-55 N.B sheet CAST NYLON POM HDPE, PE-UHMW PP ABS PC UNILATE PTFE PVC PPE, PPE-30GF PA 6, PA6.6 PET PVDF, E-CTFE PSU, PPSU, PEI PEEK

20 PTFE POLYTETRAFLUOROETHYLENE NAMIL PTFE RODS NAMIL PTFE SHEETS PTFE RODS kg/m PTFE SHEETS kg/m kg/m kg/m kg/m kg/m kg/m >> 21 l NAMIL ENPLA

21 PVC POLYVINYL CHLORIDE PVC-U PVC-U clear PVC-C ( ) PVC-HI PVC-U (ELS) CAST NYLON POM HDPE, PE-UHMW PP ABS PC UNILATE PTFE PVC PPE, PPE-30GF PA 6, PA6.6 PET PVDF, E-CTFE PSU, PPSU, PEI PEEK

22 PVC GEHR PVC RODS Tolerances PVC-U PVC-HI PVC-ELS PVC-C Min. Max. kg/m kg/m kg/m kg/m ** >> 23 l NAMIL ENPLA

PVC GEHR PVC HOLLOW BARS GEHR TUBES Clear PVC-U Outer Diameter Wall Thick-ness D PN 4 SDR 51 Tolerances d PN 6 SDR 34, 3 Wall Thick-ness PVC-U D d min. max. min. max. kg/m 15 5 +0.8 0.246-0.5 18 5 +0.

23 PVC GEHR PVC HOLLOW BARS GEHR TUBES Clear PVC-U Outer Diameter Wall Thick-ness D PN 4 SDR 51 Tolerances d PN 6 SDR 34, 3 Wall Thick-ness PVC-U D d min. max. min. max. kg/m * Wall Thick-ness PN 10 SDR 21 PN 16 SDR 13, 5 Wall Thick-ness Wall Thick-ness PN 25 SDR 9 kg/m kg/m kg/m kg/m kg/m ** 1 P.U.* Pieces CAST NYLON POM HDPE, PE-UHMW PP ABS PC UNILATE PTFE PVC PPE, PPE-30GF PA 6, PA6.6 PET PVDF, E-CTFE PSU, PPSU, PEI PEEK

24 PPE (PPO,Noryl ) POLYPHENYLENETHER PPE-30GF PPE natura PPE-30 GF 24 >> 25 l NAMIL ENPLA

25 PPE, PPE-30GF GEHR PPE, PPE-30GF RODS GEHR PPE, PPE-30GF SHEETS Tolerances PPE PPE-30GF Min. Max. kg/m kg/m Tolerances PPE Min. Max. kg/m CAST NYLON POM HDPE, PE-UHMW PP ABS PC UNILATE PTFE PVC PPE, PPE-30GF PA 6, PA6.6 PET PVDF, E-CTFE PSU, PPSU, PEI PEEK

26 PA6 POLYAMIDE 6, PA6.6 POLYAMIDE 6.6, PA6.6 30GF 26 >> 27 l NAMIL ENPLA

27 PA6, PA6.6, PA6.6 30GF GEHR PA6,PA6.6 RODS GEHR PA6,PA6.6 SHEETS Tolerances PA 6 PA 6.6 PA GF Min. Max. kg/m kg/m kg/m Tolerances PA 6 PA 6.6 PA GF Min. Max. kg/m kg/m kg/m kg/m kg/m CAST NYLON POM HDPE, PE-UHMW PP ABS PC UNILATE PTFE PVC PPE, PPE-30GF PA 6, PA6.6 PET PVDF, E-CTFE PSU, PPSU, PEI PEEK

28 PET POLYETHYLENE TEREPHTHALATE 28 >> 29 l NAMIL ENPLA

29 PET GEHR PET RODS GEHR PET SHEETS Tolerances PET Min. Max. kg/m Tolerances PET Min. Max. kg/m CAST NYLON POM HDPE, PE-UHMW PP ABS PC UNILATE PTFE PVC PPE, PPE-30GF PA 6, PA6.6 PET PVDF, E-CTFE PSU, PPSU, PEI PEEK

30 PVDF POLYVINYLIDENE FLUORIDE PVDF PVDF PVDF-SK PVDF-GK PVDF-CL PVDF-EL PVDF-EL-SK PVDF-EL-GK E-CTFE(Halar ) ETHYLENE-CHLORTRIFLUORETHYLENE 30 >> 31 l NAMIL ENPLA

31 PVDF/E-CTFE GEHR PVDF, E-CTFE RODS GEHR PVDF, E-CTFE SHEETS Tolerances PVDF Min. Max. kg/m Tolerances Min. Max. kg/m PVDF Tolerances E-CTFE inch Min. Max. kg/m 6.4 1/ / / / / / / / / / / / / / / / / / / / / kg/m PVDF 1m Rod 3 4 Coil 3 4 CAST NYLON POM HDPE, PE-UHMW PP ABS PC UNILATE PTFE PVC PPE, PPE-30GF PA 6, PA6.6 PET PVDF, E-CTFE PSU, PPSU, PEI PEEK

32 PSU POLYSULFONE PPSU POLYPHENYLENSULFONE PEI(Ultem) POLYETHERIMIDE PEI natural PEI-30GF 32 >> 33 l NAMIL ENPLA

33 PSU, PPSU, PEI(Ultem) GEHR PSU, PPSU, PEI RODS GEHR PSU, PPSU, PEI SHEETS Tolerances PSU PPSU Min. Max. kg/m kg/m Tolerances PEI PEI-30 GF inch. Min. Max. kg/m kg/m / / / / / Tolerances PSU PPSU PEI Min. Max. kg/m kg/m kg/m CAST NYLON POM HDPE, PE-UHMW PP ABS PC UNILATE PTFE PVC PPE, PPE-30GF PA 6, PA6.6 PET PVDF, E-CTFE PSU, PPSU, PEI PEEK

34 PEEK POLYETHERETHERKETONE PEEK PEEK-mod PEEK +30GF 34 >> 35 l NAMIL ENPLA

35 PEEK GEHR PEEK RODS NOTICE PEEK=twice annealed GEHR PEEK SHEETS Tolerances PEEK PEEK-mod PEEK+30GF Min. Max. kg/m kg/m kg/m Tolerances PEEK PEEK-mod PEEK+30GF Min. Max. kg/m kg/m kg/m kg/m kg/m CAST NYLON POM HDPE, PE-UHMW PP ABS PC UNILATE PTFE PVC PPE, PPE-30GF PA 6, PA6.6 PET PVDF, E-CTFE PSU, PPSU, PEI PEEK

36 36 >> 37 l NAMIL ENPLA

37 MACHINING GUIDELINES Turning Milling Drilling Belt saw Circular saw PVC PP/PE-HD ABS PMMA PC/PPE PA PDM PET PVDF E-CTFE PSU/PPSU PEI PEEK GF mod It is recoended to use only sharpened HSS tools(high Speed Steel.) Due to the danger of stress cracking we do recoend to use no cooling agents oil based(or to clean the parts well after machining). Amorphous materials should be annealed during machining To avoid treatment problems we recoend a heating up of the materials on approx Use only sharpened tools with small feed. With these materials we should be paid attention to a good exhaust of the machining area.

38 NAMIL CHEMICAL RESISTANCE PVC-U PP PE-UHMW PMMA PS-HI ABS PC PPE Konz. (%) Acetone /0 + +/ Formic acid Aonia konz Aonium chloride Amyl alcohol Apple juice Benzene / Bleaching solution 12.5CI Boric acid Brake fluid Butyl acetate Calcium chloride Chlorine, gas Chlorobenzene / Chloroform Cyclohexene Cyclohexanone / Diethylene oxide, THF ,4 Dioxane / /0-0 Diesel fuel Acetic acid Vinegar, standard Ethyl acetate / Ethylene alcohol / /0 0 + Ethylene chloride / Hydrofluoric acid Formaldehyde, aqu Frost protection agent Glycerin /0 0 + Glycol Heating oil / Heptane / Isopropyl alcohol / Mercurochrome Potassium hydroxide liquor / Cresol Linseed oil Methyl alcohol / Methylene chloride /- - 0/ Methyl ethyl ketone Milk Hydropropionic acid /0 +/ Mineral oils, aromatic free / Sodium Hyrogen sulphite Sodium carbonate, aqu Sodium chloride, aqu Sodium nitrate, aqu Sodium thiosulfate Sodium hydroxide liquor Sodium hydroxide liquor Nitrobenzene / Oxalic acid Ozone, gas < 0.5 ppm / Paraffine oil Perchloroethylene Petroleum ether Pertroleum, aromatic free / Phenol, aqu ca Phosphoric acid Propyl alcohol Pyridine Nitric acid Nitric acid / / Hydrochloric acid /- + + Hydrochloric acid konz / /0-0/- - + Carbon disulphide Sulphuric acid /0 0/ Hydrogen sulphide Silicone oil Food oil Carbon tetrachloride Tetrahydrofurane / Toluene Transformer oil + + +/ /0 + +/0 Fuel, aromatic free / Premium Fuel Trichloroethylene Water /0 + + Hydrogen peroxide Xylene Citric acid >> 39 l NAMIL ENPLA

39 Since almost any material is subject to aging, therefore is only a limited life the expectancy. Following factors have influence on the chemical stability : Temperature, duration, concentration, tension level of the part mechanical strength, etc. From the data of the list of the chemical stability the suitability of a material cannot be judged without above mentioned restrictions. In special applications it is up to the user to determine the suitability of the plastic by running trials in real time. + resistent 0 partly resistent - non-resistent PA 6 PA 6.6 POM PET PVDF E-CTFE PSU PPSU PEI PEEK / /0 - +/ / /0 0 +/0 0 0/ / / / / / / / / / / / / / / / / / /- +/ / / /0 - +/ /

40 NAMIL TECHNICAL PROPERTIES Physical Propertis 1. Specifc gravity(p) Test method Unit CAST NYLON +MOS2 +Oil +Wax +Lube +GF AST ISO 1183 g/ DIN 2. Water absorption % Max. permissible service temperature (no stronger mech. stress involve) upper temperature limit lower temperature limit Mechanical Properties 1. Tensile strength at yield ISO 527 MPa Elongation at yield ISO 527 % Tensile strength at break ISO 527 MPa Elongation at break ISO 527 % Impact strength ISO 179 KJ/ Notch impact strength ISO 179 KJ/ ISO 7. Ball indentation hardn.(h k )/ Rockwell MPa Flexural strength( B 3.5%) DIN MPa Modulus of elasticity(et) ISO 178 MPa Thermal Properties 1. Vical softening temp. VST/B/50 ISO VST/A/% Heat deflection temperature HDT/B ISO HDT/A Cof. of linear therm. expansion 4. Thermal conductivity at 20 Electrical Properties DIN DIN K W/(m K) Volume resistivity VDE 0303 cm Surface resistivity VDE DIN 3. Dielectric constant at 1MHz DIN 4. Diel. loss factor at 1 MHz Dielectric strength VDE 0303 kv/ DIN 6. Tracking resistance KB KB 600 KB 600 KB 600 KB Additional Data 1. Bondability DIN 2. Friction coefficient Flaability UL 94 HB HB HB HB HB HB HB 4. UV stabilisation 1) The physical data contained in this table are typical values. They are obtained on the test specimens under specific conditions and represent average values of a large number of tests. The results obtained on this test specimens cannot be applied to finished parts without reservations, as behavior is influenced by processing and shaping. Reproduction only with our declared permission. 2) Corresponding 3) 65(solid rod ) 57 (solid rod ) 4) 59(solid rod ) 51 (solid rod ) 5) For rods up to 160, tubes and profiles on request. 6) The materials PE-HD and PP are admitted by DIBt. 40 >> 41 l NAMIL ENPLA

41 POM-C POM TX-11H POM FL2020 POM ES-20 POM ET-20S POM ELS POM ESD HDPE PE- UHMW PP Hipro PP-30GF PP ELS ABS DIN 8075 DIN o.b o.b. o.b. o.b. 22 o.b. o.b o.b o.b CTI KB 600 KB 600 KB 600 KB KB HB HB HB HB HB HB HB HB HB HB o.b. no break + yes o limited - no

42 NAMIL TECHNICAL PROPERTIES Test method Unit PC UNILATE PC series PVC-U PVC-C PVC HI PVC ELS Physical Propertis 1. Specifc gravity(p) ISO 1183 g/ DIN 2. Water absorption % Max. permissible service temperature DIN 8061 DIN 8061 DIN (no stronger mech. stress involve) upper temperature limit lower temperature limit Mechanical Properties 1. Tensile strength at yield ISO 527 MPa Elongation at yield ISO 527 % Tensile strength at break ISO 527 MPa Elongation at break ISO 527 % Impact strength ISO 179 KJ/ o.b. 64 o.b. o.b. o.b Notch impact strength ISO 179 KJ/ ISO 7. Ball indentation hardn.(h k )/ Rockwell MPa Flexural strength( B 3.5%) DIN MPa Modulus of elasticity(et) ISO 178 MPa Thermal Properties 1. Vical softening temp. VST/B/50 ISO ) VST/A/% Heat deflection temperature HDT/B ISO ) HDT/A Cof. of linear therm. expansion 4. Thermal conductivity at 20 Electrical Properties DIN DIN K W/(m K) Volume resistivity VDE 0303 cm Surface resistivity VDE DIN 3. Dielectric constant at 1MHz DIN 4. Diel. loss factor at 1 MHz Dielectric strength VDE 0303 kv/ DIN 6. Tracking resistance CTI 250 KB 600 KB 600 KB Additional Data 1. Bondability DIN 2. Friction coefficient Flaability UL 94 HB HB V-0 V-0 V-0 V-0 4. UV stabilisation ) The physical data contained in this table are typical values. They are obtained on the test specimens under specific conditions and represent average values of a large number of tests. The results obtained on this test specimens cannot be applied to finished parts without reservations, as behavior is influenced by processing and shaping. Reproduction only with our declared permission. 2) Corresponding 3) 65(solid rod ) 57 (solid rod ) 4) 59(solid rod ) 51 (solid rod ) 5) For rods up to 160, tubes and profiles on request. 6) The materials PE-HD and PP are admitted by DIBt. 42 >> 43 l NAMIL ENPLA

43 PPE PA 6 PA 6.6 PET PVDF E-CTFE PSU PPSU PEI PEEK PPE- 30GF PEI- 30GF PEEKmod PEEK- 30GF /45 80/ /20 40/ o.b. 25 o.b. o.b. o.b. 252 o.b. o.b. o.b. o.b. - o.b /o.B o.b /70 170/ R90 M69 M80 M109 M114 M99 - M / / /7 3.6/ / / CTI 175 CTI 325 CTI 600 CTI 600 CTI 600 CTI 300 CTI 600 CTI CTI 150 CTI 150 CTI HB V-1 HB V-2 HB V-0 V-0 V-0 V-0 V-0 V-0 V-0 V-0 V o.b. no break + yes o limited - no

PE300 Sheet Extruded. Product information. Applications. This document contains. Product full identity: Properties.

PE300 Sheet Extruded. Product information. Applications. This document contains. Product full identity: Properties. Product information Product full identity: High Density Polyethylene PE300 is a lightweight (SG 0.96) and strong material that has excellent sliding properties, good chemical resistance, low moisture absorption