High Temperature (230 C) High Precision Thin Film Wraparound Chip Resistor Arrays, Sulfur Resistant
|
|
- Ashley Dawson
- 6 years ago
- Views:
Transcription
1 High Temperature (230 ) High Precision Thin ilm Wraparound hip Resistor rrays, Sulfur Resistant PRHT arrays can be used in most applications requiring a matched pair (or set) of resistor elements at very high temperature up to 230. The networks provide 2 ppm/ TR tracking, a ratio tolerance as tight as 0.05 % and outstanding stability. They are available in pitch: 1.00 mm for PRHT 100 (based on case 0603) 1.35 mm for PRHT 135 (based on case 0805) 1.82 mm for PRHT 182 (based on case 16) TURS Tight TR (10 ppm/ ) and TR tracking (to 2 ppm/ ) 2 to 4 resistors (same or different values) Ratio tolerance to 0.05 % Gold terminations for temperature up to 230 vailable High temperature (230 ) Sng terminations for temperature up to 0 vailable SM wraparound chip resistor array Thin film technology Very low noise < -35 d and voltage coefficient < 0.01 ppm/v Sulfur resistant (per STM humid vapor test) Material categorization: or definitions of compliance please see TYPIL PRORMN TRKING TR 10 ppm/ 2 ppm/ TOL. % 0.05 % IMNSIONS Independent resistors IM. PRHT 100 (0603 base) PRHT 135 (0805 base) PRHT 182 (16 base) mm mil mm mil mm mil = N x (± 0.2 mm) = N x (± 8 mil) One common point Suggested land pattern (according to IP-7351) G min X max Z max. G min. X max. Z max Revision: 23-pr-14 1 ocument Number: 53057
2 GLOL PRT NUMR INORMTION (1) New Global Part Numbering: PRHT100I4-1K00WGT P R H T I 4-1 K 0 0 W G T GLOL MOL PRHT 100 PRHT 135 PRHT 182 ONIG. I: Independent : ommon NUMRS O RSISTORS 2 to 4 ecimal R or K VLU (2) S. TOL. TOL. TRMINTION (3) PKGING = % = 1 % = 0.1 % = 0.1 % W = 0.05 % N: Sng over nickel barrier G: Gold over nickel barrier W = Waffle pack, 100 min., 1 mult Tape and Reel: T: 100 min., 1 mult T: 100 min., 100 mult T: 250 min., 250 mult T: 500 min., 500 mult T: 1000 min., 1000 mult T: 2500 min., 2500 mult T: ull tape N and G: Lead (Pb)-free/RoHS version Notes (1) Part number can only have 18 digits. epending on infomation needed a compromise has to be found. codification can be used to identify case size + configuration and number of resistors. See table below..g. PRHT100I4-4K75WGT (Part number has more than 18 digts): PRHT100I4 must be replaced by PRHT17 = PRHT17-4K75WGT (2) When the last digit(s) of the ohmic value is (are) 0, it (they) can be omitted..g.: PRHT100I4-2KWGT can be ordered under PRHT100I4-2K2WGT PRHT100I4-1K00WGT can be ordered under PRHT100I4-1KWGT (3) N termination for temperature up to 0. G termination for temperature up to 230. OIITION O SIZ + ONIGUTION + NUMR O RSISTORS O 18 O 40 O 18 O 40 O 18 O 40 O 18 O 40 O 18 O 40 1 PRHT073I2 15 PRHT100I2 29 PRHT182I2 43 PRHT PRHT PRHT073I3 16 PRHT100I3 30 PRHT182I3 44 PRHT PRHT PRHT073I4 17 PRHT100I4 31 PRHT182I4 45 PRHT PRHT PRHT073I5 18 PRHT100I5 32 PRHT182I5 46 PRHT PRHT PRHT073I6 19 PRHT100I6 33 PRHT182I6 47 PRHT PRHT PRHT073I7 PRHT100I7 34 PRHT182I7 48 PRHT PRHT PRHT073I8 21 PRHT100I8 35 PRHT182I8 49 PRHT PRHT PRHT074I2 22 PRHT135I2 36 PRHT PRHT PRHT PRHT074I3 23 PRHT135I3 37 PRHT PRHT PRHT PRHT074I4 24 PRHT135I4 38 PRHT PRHT PRHT PRHT074I5 25 PRHT135I5 39 PRHT PRHT PRHT PRHT074I6 26 PRHT135I6 40 PRHT PRHT PRHT PRHT074I7 27 PRHT135I7 41 PRHT PRHT PRHT PRHT074I8 28 PRHT135I8 42 PRHT PRHT PRHT1828 STNR LTRIL SPIITIONS MOL SIZ Notes (4) t +215 (5) t -40 to +215 RSISTN RNG POWR RTING PR RSISTOR (4) W TOLRN ± % TOLRN % TR (5) ± ppm/ TR (5) ± ppm/ PRHT to 250K ,, , PRHT to 500K ,, , PRHT to 2M ,, , Revision: 23-pr-14 2 ocument Number: 53057
3 LIMTI SPIITIONS Operating temperature range -55 to +215 Storage temperature range -55 to +230 PRORMN VS. HUMI SULUR VPOR Test conditions Test results PKGING Several types of packaging are available: Waffle-pack and tape and reel. SIZ PR100 x 2 RTING 50 ± 2, 85 % % RH, exposure time 500 h Resistance drift < (0.05 % R ), no corrosion products observed NUMR O PIS PR PKG WL PK TP N RL MOQ MX. QUNTITY PR OX MIN. MX. 100 PR100 x PR100 x 4 60 PR135 x PR135 x PR135 x 4 60 PR182 x 2 60 PR182 x 2 60 PR182 x MHNIL SPIITIONS Substrate lumina Technology Thin ilm ilm Nickel chromium with mineral passivation N type: Sng over nickel barrier Terminations (1) G type: Gold over nickel barrier Note (1) N terminations for temperatures up to 0. G terminations for temepratures up to 230. PRORMNS TST Noise Voltage coefficient Limiting voltage PKGING RULS PRHT 100 PRHT 135 PRHT 182 SPIITIONS -35 d 0.01 ppm/v 50 V 100 V 150 V Waffle Pack an be filled up to maximum quantity indicated in the table here above, taking into account the minimum order quantity. When quantity ordered exceeds maximum quantity of a single waffle pack, the waffle packs are stacked up on the top of each other and closed by one single cover. To get not stacked up waffle pack in case of ordered quantity > maximum number of pieces per package: Please consult for specific ordering code. Tape and Reel an be filled up to maximum quantity indicated in the table here above, taking into account the minimum order quantity. When quantity ordered is between the MOQ and the maximum reel capacity, only one reel is provided. When several reels are needed for ordered quantity within MOQ and maximum reel capacity: Please consult for specific ordering code. RT POWR IN % MINT TMPRTUR IN MRKING On the primary package, printed information includes Vishay S.. trademark series and model, schematic number of resistors, ohmic value, absolute tolerance, ratio tolerance, type of termination: tinned over nickel barrier. Marking on parts: R1 R2.g.: Ohmic value 13K: oded 1302: M = 1, = 3, = 0, U = 2 M 6 5 U 3 4 R3 R4 Revision: 23-pr-14 3 ocument Number: 53057
4 PRORMN TSTS ONITIONS RQUIRMNTS PR (Typical Values) RITS Overload 2.5 Un/2 s 0.05 % Rn % Rn limatic sequences -55 to +155 /5 moisture cycles 0.1 % Rn % Rn Thermal shock -55 to +155 /5 cycles 30' 0.05 % Rn % Rn Load life 1000 h/pn at 215 % Rn 0.25 % Rn 8000 h/pn at % Rn 0.4 % Rn Resistance to solder heat 260 /10 s 0.05 % Rn % Rn Moisture resistance 0.01 Pn at % RH 0.1 % Rn % Rn High temperature storage 1000 h/no load at % Rn % Rn Note Rn: Nominal resistance Revision: 23-pr-14 4 ocument Number: 53057
5 Legal isclaimer Notice Vishay isclaimer LL PROUT, PROUT SPIITIONS N T R SUJT TO HNG WITHOUT NOTI TO IMPROV RLIILITY, UNTION OR SIGN OR OTHRWIS. Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively, Vishay ), disclaim any and all liability for any errors, inaccuracies or incompleteness contained in any datasheet or in any other disclosure relating to any product. Vishay makes no warranty, representation or guarantee regarding the suitability of the products for any particular purpose or the continuing production of any product. To the maximum extent permitted by applicable law, Vishay disclaims (i) any and all liability arising out of the application or use of any product, (ii) any and all liability, including without limitation special, consequential or incidental damages, and (iii) any and all implied warranties, including warranties of fitness for particular purpose, non-infringement and merchantability. Statements regarding the suitability of products for certain types of applications are based on Vishay s knowledge of typical requirements that are often placed on Vishay products in generic applications. Such statements are not binding statements about the suitability of products for a particular application. It is the customer s responsibility to validate that a particular product with the properties described in the product specification is suitable for use in a particular application. Parameters provided in datasheets and/or specifications may vary in different applications and performance may vary over time. ll operating parameters, including typical parameters, must be validated for each customer application by the customer s technical experts. Product specifications do not expand or otherwise modify Vishay s terms and conditions of purchase, including but not limited to the warranty expressed therein. xcept as expressly indicated in writing, Vishay products are not designed for use in medical, life-saving, or life-sustaining applications or for any other application in which the failure of the Vishay product could result in personal injury or death. ustomers using or selling Vishay products not expressly indicated for use in such applications do so at their own risk. Please contact authorized Vishay personnel to obtain written terms and conditions regarding products designed for such applications. No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document or by any conduct of Vishay. Product names and markings noted herein may be trademarks of their respective owners. Material ategory Policy Vishay Intertechnology, Inc. hereby certifies that all its products that are identified as RoHS-ompliant fulfill the definitions and restrictions defined under irective 11/65/U of The uropean Parliament and of the ouncil of June 8, 11 on the restriction of the use of certain hazardous substances in electrical and electronic equipment () - recast, unless otherwise specified as non-compliant. Please note that some Vishay documentation may still make reference to RoHS irective 02/95/. We confirm that all the products identified as being compliant to irective 02/95/ conform to irective 11/65/U. Vishay Intertechnology, Inc. hereby certifies that all its products that are identified as Halogen-ree follow Halogen-ree requirements as per J JS709 standards. Please note that some Vishay documentation may still make reference to the I definition. We confirm that all the products identified as being compliant to I conform to J JS709 standards. Revision: 02-Oct-12 1 ocument Number: 91000
High Temperature (230 C) High Precision Thin Film Wraparound Chip Resistor Arrays, Sulfur Resistant
High Temperature (230 ) High Precision Thin ilm Wraparound hip Resistor rrays, Sulfur Resistant SIGN SUPPORT TOOLS Models vailable click logo to get started PRHT arrays can be used in most applications
More informationHigh-Precision Thin Film Chip Resistor Arrays, Sulfur Resistant
High-Precision Thin Film Chip Resistor Arrays, Sulfur Resistant PRA arrays can be used in most applications requiring a matched pair (or set) of resistor elements. The networks provide 1 ppm/ C TCR tracking,
More informationHigh Stability Resistor Chips (< 0.25 % at Pn at 70 C during 1000 h) Thick Film Technology
High Stability Resistor Chips (< 0.25 % at Pn at 70 C during 0 h) Thick Film Technology thick film resistor chips are specially designed to meet very stringent specifications in terms of reliability, stability
More informationHigh Temperature (245 C) Thick Film Chip Resistor
High Temperature (245 C) Thick Film Chip Resistor DESIGN SUPPORT TOOLS Models Available click logo to get started FEATURES High temperature (245 C) Large ohmic value range 0.1 to 100 M Available Operating
More informationHigh Temperature (245 C) Thick Film Chip Resistor
High Temperature (245 C) Thick Film Chip Resistor For applications such as down hole applications or aircraft breaking systems, the need for parts able to withstand very severe conditions (temperature
More informationHigh Stability Resistor Chips (< 0.25 % at Pn at 70 C during 1000 h) Thick Film Technology
High Stability Resistor Chips (< 0.25 % at Pn at 70 C during 0 h) Thick Film Technology thick film resistor chips are specially designed to meet very stringent specifications in terms of reliability, stability
More informationESCC ( ) 4001/023 Qualified High Precision (5 ppm, 0.01 %), Thin Film Chip Resistors
( ) 4001/023 Qualified High Precision (5 ppm, 0.01 %), Thin Film Chip Resistors DESIGN SUPPORT TOOLS Models Available click logo to get started Thin Film division holds QML qualification ( technology flow
More informationSMD Wraparound Ultra Low Value Thin Film Resistors
SMD Wraparound Ultra ow Value Thin Film Resistors DESIGN SUPPORT TOOS Models click logo to get started With extremely low resistance and high power capabilities, these ultra low value resistors are available
More informationHigh Temperature (230 C) Wirebondable Thin Film Chip Resistors and Resistor Networks
MKHT (NHT) High Temperature (230 ) irebondable Thin ilm hip esistors and esistor Networks SIN SUPPOT TOOLS Models vailable INTOUTION click logo to get started or applications such as down hole applications,
More informationMetal Film Resistors, Industrial, Precision
Metal Film Resistors, Industrial, Precision FEATURES Small size - conformal coated Flame retardant epoxy coating Controlled temperature coefficient Available Excellent high frequency characteristics Exceptionally
More informationThick Film Chip Dividers, High Voltage
Thick Film hip Dividers, High Voltage DHV FETURES High voltage up to 3000 V Typical resistance ratios of 250:1, 500:1, etc.; vailable maximum resistance ratio of 800:1 vailable Flow solderable Tape and
More informationCommercial Thin Film Chip Resistor, Surface Mount Chip
Commercial Thin Film Chip Resistor, Surface Mount Chip PTN Actual Size 1505 These chip resistors are available in both top side and wraparound termination styles in a variety of sizes. They incorporate
More informationHigh Reliability Thick Film Resistor, Surface Mount Chip
High Reliability Thick Film Resistor, Surface Mount Chip M Actual Size 0502 Utilizing proven expertise in thick and thin film resistors to satisfy your manufacturing needs, Vishay provides a high rel chip
More informationPower Resistor Thick Film Technology
Power Resistor Thick Film Technology LTO series are the extension of RTO types. We used the direct ceramic mounting design (no metal tab) of our RCH power resistors applied to semiconductor packages. FEATURES
More informationPower Resistor for Mounting onto a Heatsink Thick Film Technology
Power Resistor for Mounting onto a Heatsink Thick Film Technology FEATURES High power rating: 500 W High overload capability up to 2 times rated Power (see energy curve Heatsink mounting Low thermal radiation
More informationSMD PTC - Nickel Thin Film Linear Thermistors
SMD PTC - Nickel Thin Film Linear Thermistors Notes (1) Contact if closer TCR lot tolerance is desired. (2) Other R 25 -values and tolerances are available upon request. (3) Rated continuous working voltage
More information20 W Power Resistor, Thick Film Technology, TO-220
20 W Power Resistor, Thick Film Technology, TO-220 DESIGN SUPPORT TOOLS Models Available click logo to get started The well known TO-220 package is compact and easy to mount. DIMENSIONS in millimeters
More information30 V to 60 V PTC Thermistors for Overload Protection
30 V to 60 V PTC Thermistors for Overload Protection FEATURES Wide range of trip and non-trip currents: From 94 ma up to 2 A for the trip current Small ratio between trip and non-trip currents (I t /I
More informationPrecision Automotive Thin Film Chip Resistors, AEC-Q200 Qualified, 2 kv ESD Rating
Precision Automotive Thin Film Chip Resistors, AEC-Q200 Qualified, 2 kv ESD Rating PAT These chip resistors are available in wraparound terminations styles in 8 case sizes. They incorporate self passivated
More informationMFM Metal Film MELF Resistor
MFM Metal Film MELF Resistor MFM (0102, 0204, 0207, 0309) Metal Film MELF Resistor Standard Type MFM (1/8W, 1/4W. 1/2W) Application - Automotive - Industrial Control System - Telecommunication Equipment
More informationPrecision Surface Mount Resistors Wirewound or Metal Film Technologies
Precision Surface Mount Resists FEATURES Approved accding (wirewound) Wide range of ohmic values (0.04 to 1 M ) Low temperature coefficient (± 25 ppm/ C available) Good electrical insulation All welded
More informationPower Resistor for Mounting onto a Heatsink Thick Film Technology
Power Resistor for Mounting onto a Heatsink Thick Film Technology DESIGN SUPPORT TOOLS click logo to get started FEATURES High power rating Low thermal radiation of the case Wide ohmic value range Easy
More informationPower Resistor, for Mounting onto a Heatsink Thick Film Technology
Power Resistor, for Mounting onto a Heatsink Thick Film Technology FEATURES 100 W at 25 C case temperature High power rating High overload capabilities up to 2500 V RMS Wide resistance range from 0.0 to
More informationHigh Current Thermal Fuse
High Current Thermal Fuse FEATURES Functioning temperature: F = (235 ± 15) C Holding temperature: H = 160 C Current: 55 A Material categorization: For definitions of compliance please see www.vishay.com/doc?99912
More informationPower Resistor for Mounting onto a Heatsink Thick Film Technology
Power Resistor for Mounting onto a Heatsink Thick Film Technology DESIGN SUPPORT TOOLS click logo to get started FEATURES High power rating: 500 W High overload capability up to 2 times rated power (see
More information145 V PTC Thermistors for Overload Protection
45 V PTC Thermistors for Overload Protection FEATURES Wide range of trip and non-trip currents: From 47 ma up to A for the non-trip current Small ratio between trip and non-trip currents (I t /I nt =.5
More informationPrecision Surface Mount Resistors Wirewound or Metal Film Technologies
Precision Surface Mount Resists irewound Metal Film Technologies FEATURES Accding to CECC 40402-801 (wirewound) ide range of ohmic values (0.04 to 1 M) Low temperature coefficient (± 25 ppm/ C available)
More informationPower Resistor for Mounting onto a Heatsink Thick Film Technology
Power Resistor for Mounting onto a Heatsink Thick Film Technology DESIGN SUPPORT TOOLS click logo to get started FEATURES 800 W at 85 C bottom case temperature Wide resistance range: 0.3 to 900 k E24 series
More informationWirewound Resistors, Industrial Power, Aluminum Housed, Chassis Mount
Wirewound Resistors, Industrial Power, Aluminum Housed, hassis Mount DESIGN SUPPORT TOOLS Models click logo to get started FEATURES Molded construction for total environmental protection omplete welded
More informationFRSTSeries (Z1FoilTechnology) Series (0603,0805,1206,1506,2010,2512) (0603, 0805, 1206, 1506, 2010, 2512)
FRSTSeries (Z1FoilTechnology) Series (0603,0805,1206,1506,2010,2512) Foil Technology) Ultra High-Precision Foil Wraparound Surface Mount Chip Resistor for High Temperature Applications up to +200 C, Humidity
More informationWirewound Resistors, Industrial Power, Aluminum Housed, Chassis Mount
Wirewound Resistors, Industrial Power, FEATURES Molded construction for total environmental protection omplete welded construction Meets applicable requirements of MIL-PRF-18546 Available in non-inductive
More informationWirewound Hex Power Resistor
irewound Hex Power Resistor FETURES Resistance-alloy round wire is continuously wound on specially designed porcelain insulators Open coil construction allows efficient heat dissipation and easily accomodates
More informationVSMP Series (0603, 0805, 1206, 1506, 2010, 2018, 2512) (Z-Foil)
VSMP Series (63, 85, 126, 156, 21, 218, 2512) Ultra High Precision Foil Wraparound Surface Mount Chip Resistor with TCR of ±.5 ppm/ C and Power Coefficient of 5 ppm at Rated Power and Load Life Stability
More informationRTD Simulator. Handy Resistor Simulates RTD Temperature Outputs, such as PT-100 and PT Vishay Foil Resistors FEATURES AND BENEFITS
Handy Resistor Simulates RTD Temperature Outputs, such as PT-100 and PT-1000 FEATURES AND BENEFITS Temperature coefficient of resistance (TCR): 55 to +125, 25 ref. RTD simulator (C): ±2 ppm/ typical (see
More informationGold Wire Bondable Chip Resistor for Hybrid Circuits and High Temperature Applications up to +240 C, Long-Term Stability of 0.05%
Ultra High Precision Ultra Z1 High Foil Technology Precision Z1 Gold Foil Wire Technology Bondable Chip Resistor Gold Wire Bondable Chip Resistor for Hybrid Circuits and High Temperature Applications up
More informationPower Resistors Cooled by Auxiliary Heatsink (Not Supplied) Thick Film Technology
Power Resistors Cooled by Auxiliary Heatsink (Not Supplied) Thick Film Technology FEATURES Technology: thick film deposited on ceramic Cold system without external radiation High power / volume ratio Non-inductive
More informationUltra High Precision Bulk Metal Foil Technology 4 Resistor Surface Mount Hermetic Network with 0.5 ppm/ C TCR Tracking and % Tolerance Match
Ultra High Precision Bulk Metal Foil Technology 4 Resistor Surface Mount Hermetic Network with 0.5 ppm/ C TCR Tracking and 0.005 % Tolerance Match INTRODUCTION Vishay model SMNH networks incorporate all
More informationTWIN Vertical SMD PTC Thermistors For Telecom Overload Protection
PC Series WIN Vertical SMD PC hermistors For elecom Overload Protection QUICK REFERENCE DAA PARAMEER VALUE UNI Resistance value at 25 C 1 to 5 Switching temperature 15 to 13 C Maximum voltage (RMS) 24
More informationMetal Film Resistors, Industrial, Flameproof
FP Metal Film Resistors, Industrial, Flameproof STANDARD ELECTRICAL SPECIFICATIONS HISTORICAL P 25 C POER RATING P C P 70 C FEATURES Small physical size Low cost FP resistors have the ability to withstand
More informationPARAMETER Resistance Range 3 mω to 200 mω 2 mω to 200 mω
Models # 303144 and 303145 - Fixed Resistors CSM2512 and CSM3637 with Screen/Test Flow in Compliance with EEE-NST-002 (Tables 2 and 3, Film/Foil, Level 1) ML-PRF-55342 and ML-PRF-49465 303144 and 303145
More informationFEATURES. Resistance Range Power Rating at 70 C Maximum Current Maximum Working Voltage (P x R) 1/2 Tightest Tolerance ± 0.1 %
Bulk Metal Technology High Precision, Current Sensing, Power Surface Mount, Metal Strip Resistor with Improved Stability 0.05 %, Resistance Value from 10 mω, Rated Power to 1 W and TCR to 0 ± 15 ppm/ C
More informationFRSH Series (0603, 0805, 1206, 1506, 2010, 2512) (Z1-Foil) Vishay Foil Resistors
Ultra High Precision Foil Wraparound Surface Mount Chip Resistor with Extended Pads for High Power/High Temperature Applications up to +225 C, Load Life Stability of 0.05%,TCR to ± 1ppm/ C INTRODUCTION
More informationPRELIMINARY. FRSH Series (0603, 0805, 1206, 1506, 2010, 2512) (Z1-Foil) Vishay Foil Resistors
Ultra High Precision Foil Wraparound Surface Mount Chip Resistor with Extended Pads for High Power/High Temperature Applications up to +225 C, Load Life Stability of 0.05%,TCR to ± 1ppm/ C INTRODUCTION
More informationLead (Pb)-free Thick Film, Rectangular, Low Value Chip Resistors
Lead (Pb)-free Thick Film, Rectangular, FTURES Low resistance values (down to 0.1 Ω) Suitable for current sensors and shunts Metal glaze on high quality ceramic Protective overglaze Lead (Pb)-free solder
More information1-8M CMF F T-1 R36 HISTORICAL MODEL RESISTANCE VALUE TOLERANCE CODE TEMP. COEFFICIENT PACKAGING
CMF Industrial Metal Film Resistors, Industrial FEATURES Small size - conformal coated Flame retardant epoxy coating Controlled temperature coefficient Excellent high frequency characteristics Exceptionally
More informationPRELIMINARY. FRSH Series (0603, 0805, 1206, 1506, 2010, 2512) (Z1-Foil) Vishay Foil Resistors
Ultra High Precision Foil Wraparound Surface Mount Chip Resistor with Extended Pads for High Power/High Temperature Applications up to +225 C, Load Life Stability of 0.05%,TCR to ± 1ppm/ C INTRODUCTION
More informationFRSM Series (Z1 Foil Technology)
(Z1 Foil Technology) UltraHigh-PrecisionFRSMWrap-AroundChipResistors,Z1FoilTechnologyConfiguration Resistors, Z1 Foil Technology Configuration with TCR of ±0.05 ppm/ C and Improved Load-Life Stability
More informationHTHG* (Z1-Foil) Vishay Foil Resistors
HTHG* (Z1-Foil) Ultra High Precision Z1-Foil Technology Gold Wire Bondable Chip Resistor for Hybrid Circuits for High Temperature Applications up to +240 C, Long Term Stability of 0.05%,TCR to ± 1ppm/
More informationPRELIMINARY. HTHA (Z1-Foil)
Ultra High Precision Z1-Foil Technology Chip Resistor for Hybrid Circuits with Aluminum Wire Bonding for High Temperature Applications up to +240 C, Long Term Stability of 0.05%, TCR to ± 1ppm/ C INTRODUCTION
More informationHTHA (Z1-Foil) Vishay Foil Resistors
Ultra High Precision Z1-Foil Technology Chip Resistor for Hybrid Circuits with Aluminum Wire Bonding for High Temperature Applications up to +240 C, Long Term Stability of 0.05%, TCR to ± 1ppm/ C INTRODUCTION
More informationHigh Ohmic / High Voltage Metal Glaze Leaded Resistors
High Ohmic / High Voltage Metal Glaze Leaded Resistors FEATURES UL Approved (UL1676, file no: E171160) Meet the safety requirements of: - IEC 60065 - EN 60065 - VDE 0860 - CQC (China) High pulse loading
More informationPRELIMINARY. HTH (Z1-Foil)
Ultra High Precision Z1-Foil Technology Gold Wire Bondable Chip Resistor for Hybrid Circuits for High Temperature Applications up to +240 C, Long Term Stability of 0.05%,TCR to ± 1ppm/ C INTRODUCTION (VFR
More informationHigh Ohmic / High Voltage Metal Glaze Leaded Resistors
High Ohmic / High Voltage Metal Glaze Leaded Resistors A metal glazed film is deposited on a high grade ceramic body. After a helical groove has been cut in the resistive layer, tinned electrolytic copper
More informationINTRODUCTION. PARAMETER Resistance Range 3 mω to 200 mω 2 mω to 200 mω
Models 303144 and 303145 Fixed Resistors CSM2512 and CSM3637 with Screen/est Flow in Compliance with EEE-NS-002 (ables 2 and 3, Film/Foil, Level 1) ML-PRF-55342 and ML-PRF-49465 FEURES emperature coefficient:
More informationFEATURES. Resistance Range Power Rating at 70 C Maximum Current Maximum Working Voltage (P x R) 1/2 Tightest Tolerance ± 0.1 %
Bulk Metal Technology High Precision, Current Sensing, Power Surface Mount, Metal Strip Resistor with mproved Stability.5 %, Resistance Value from 1 mω, Rated Power to 1 W and TCR to ± 15 ppm/ C The CSM
More informationHigh Pulse, Fusible, Non-Inductive, Flameproof, Metal Film Resistor
High Pulse, Fusible, Non-Inductive, Flameproof, Metal Film Resistor FEATURES Designed to meet UL1412 safety requirements Defined fusing characteristics Inherent non-inductive design Superior surge handling
More information30 V to 60 V PTC Thermistors For Overload Protection
30 V to 60 V PTC Thermistors 238 66. 5.../PTCCL..H...BE FEATURES Wide range of trip and non-trip currents: From 94 ma up to 2 A for the trip current Small ratio between trip and non-trip currents (I t
More informationLA WW40WP6. Premium Edition Warm White 40 mil
Light Avenue Premium Edition LED series is designed for high performance consumer applications. Remarkable light extraction is reached by a particular top emitting design with vertical chip structure.
More informationLA WW40WP4. Premium Edition Warm White 40 mil
Light Avenue Premium Edition LED series is designed for high performance consumer applications. Remarkable light extraction is reached by a particular top emitting design with vertical chip structure.
More informationUltra High Precision, Surface Mount Metal Strip Resistor with Increased Power to 5W (40A max), Resistance Values from 3 m, and TCR to ± 15 ppm/ C
Ultra High Precision, Surface Mount Metal Strip Resistor with ncreased Power to 5W (40A max), Resistance Values from 3 m, and TCR to ± 15 ppm/ C NEW NTRODUCTON The CSM3637P is a low value current sense
More informationHigh Ohmic / High Voltage Metal Glaze Leaded Resistors
High Ohmic / High Voltage Metal Glaze Leaded Resistors A metal glazed film is deposited on a high grade ceramic body. After a helical groove has been cut in the resistive layer, tinned electrolytic copper
More informationIMPROVED PRODUCT. S Series. High Precision Foil Resistor with TCR of ± 2.0ppm/ C, Tolerance of ± 0.005% and Load Life Stability of ± 0.
THROUGH HOLE S Series High Precision Foil Resistor with TCR of ± 2.0ppm/ C, Any value at any tolerance available within resistance range INTRODUCTION Bulk Metal Foil (BMF) Technology outperforms all other
More informationLA YG12WP5. Premium Edition Yellowish Green 12 mil
Light Avenue Premium Edition LED series is designed for high performance consumer applications. Remarkable light extraction is reached by a particular top emitting design with vertical chip structure.
More informationLA LM56UXS1. Near Ultraviolet Laser Diode (406 nm), Multi Mode. Important Safety Advice
Important Safety Advice Depending on the mode of operation, these devices emit highly concentrated visible light which can be hazardous to the human eye. Products which incorporate these devices have to
More informationVAR. Vishay Foil Resistors FEATURES INTRODUCTION
Ultra High Precision, Z-Foil Audio Resistor Minimizes Noise and Distortion in the Signal Path with TCR of ± 0.05 ppm/ C, Tolerance to ± 0.005 % and High Linearity or Low Voltage Coefficient of Resistance
More informationMIL-PRF-39035, Char. H with a Smooth and Unidirectional Output
Bulk Metal Foil Ultra High Technology Precision Trimming Potentiometers, 3 / 8 " Square, RJ24 Style, Designed to Meet or Exceed the Requirements of MIL-PRF-39035, Char. H with a Smooth and Unidirectional
More informationLA LS56HRC1. Hyper red Laser Diode (660 nm), Single Mode. Important Safety Advice
Important Safety Advice Depending on the mode of operation, these devices emit highly concentrated visible light which can be hazardous to the human eye. Products which incorporate these devices have to
More informationLA LS56CYS1. Cyan Laser Diode (488 nm), Single Mode. Important Safety Advice
Important Safety Advice Depending on the mode of operation, these devices emit highly concentrated visible light which can be hazardous to the human eye. Products which incorporate these devices have to
More informationLA LM56HRS1. Hyper red Laser Diode (661 nm), Multi Mode. Important Safety Advice
Important Safety Advice Depending on the mode of operation, these devices emit highly concentrated visible light which can be hazardous to the human eye. Products which incorporate these devices have to
More information(1) For internal configuration and circuit schematic, please contact. (2) For power rating per each package, please refer to page 5
Custom Hermetically Sealed Precision Resistor Network Devices (PRND) With Screen/Test Flow in Compliance with EEE-INST-002 (Tables 2A and 3A, Film/Foil, evel ) and MI-PRF-340 INTRODUCTION PRND (Precision
More informationZPY3V9 to ZPY100. Zener Diodes. Vishay Semiconductors. Features Silicon Planar Power Zener Diodes For use in stabilizing and clipping circuits
ZPYV9 to ZPY Zener Diodes Features Silicon Planar Power Zener Diodes For use in stabilizing and clipping circuits e with high power rating The Zener voltages are graded according to the international E
More informationVAR. Vishay Foil Resistors FEATURES INTRODUCTION
Ultra High Precision, Z-Foil Audio Resistor Minimizes Noise and Distortion in the Signal Path with TCR of ± 0.05 ppm/ C, Tolerance to ± 0.005 % and High Linearity or Low Voltage Coefficient of Resistance
More informationKnob Potentiometer FEATURES
FEATURES 1 Watt at 40 C CECC 41300 P16 - version for professional and industrial applications PA16 - version for professional audio applications Compact (integrated) Minimum clearance required Safety in
More informationCFN Series Metal Foil, Current Sense Resistor
RoHS COMPLIANT* & HALOGEN FREE** Features n Metal foil n High power density n High reliability and stability n RoHS compliant* and halogen free** Applications n Current sensing n Power supplies n Stepper
More informationCRK Series Metal Strip, Wide Terminal Current Sense Resistor
RoHS COMPLIANT* & HALOGEN FREE** Features n ide terminal type n Excellent heat dissipation n High reliability n Metal alloy plate n RoHS compliant* and halogen free** Applications n Current sensing n Power
More informationLA PD120HP1. Premium Edition Standard PIN photodiode 120 mil
Light Avenue Premium Edition detector series is designed for high performance consumer applications. This chip is a high sensitive PIN photodiode chip with 7.7 mm 2 sensitive area detecting visible and
More informationUltra High Precision Z-Foil Though-Hole Resistor with TCR of ± 0.05 ppm/ C, Tolerance of ± % (50 ppm), Load Life Stability of ± 0.
Ultra High Precision Z-Foil Though-Hole Resistor with TCR of ± 0.05 ppm/ C, Tolerance of ± 0.005 % (50 ppm), Load Life Stability of ± 0.005 % INTRODUCTION The Bulk Metal Foil resistor is based on a special
More informationCRM-A Series High Power Thick Film Resistor
*RoHS COMPLIANT, **HALOGEN FREE & AEC-Q200 COMPLIANT Features Thick film technology Power rating up to 2 watts at 70 C High power surge withstanding Sulfur-resistant design (ASTM B-809) RoHS compliant*
More informationType RQ73 1E RQ73 1J RQ73 2A RQ73 2B Size Resistance tolerance ±0.1% Resistance Range 40R ~ 35K 40R ~ 130K 10R ~ 350K 10R ~1M0
Key Features Type RQ73 Series SMD TaN Thin film resistor Special passivation layer on resistive element AEC-Q200 qualified Sulfur resistant (per ASTM B809-95 humid vapor test) RoHS Compliant TE Connectivity
More informationSelf Contained Weighing Module
Model 9010 Self Contained Weighing Module FEATURES Capacities 3-90kg Unique adjustable tare load cancelling mechanism Highly effective viscous damping 6 Built-in overload limit stops in three directions
More informationLoad Cell Weigh Modules
FEATURES Capacity range: 500, 1.25K, 2.5K, 5K, and 10K lb (227, 567, 1.13K, 2.27K, and 4.5K kg) High-grade, welded, stainless-steel load beams (1.25K to 10K lb) Sealed to IP67 standards for washdown service
More informationSelf-Contained Weighing Module
FEATURES Capacities 3 90 kg Unique adjustable tare load cancelling mechanism Highly effective viscous damping 6 Built-in overload limit stops in three directions Weighing speed is much faster than standard
More informationHigh Capacity Weigh Modules
FEATURES Capacity range: 200K and 300K lb (90.7K and 136K kg) Low profile and low deflection with symmetrical mounting bolt pattern for easy installation Floating design allows for thermal expansion and
More informationSMV LF: Hyperabrupt Junction Tuning Varactor
DATA SHEET SMV1145-079LF: Hyperabrupt Junction Tuning Varactor Applications High volume commercial systems Features Frequency linear design Low series resistance Package is rated MSL1, 260 C per JEDEC
More informationMounting Method. V =Through Hole S = SMD H = Horizontal Adjust. (See note 2. (2) Horizontal adjust versions will be studied case by case
S-15 Rotary Switch FEATURES 2 and 6 positions versions (standard) SMD or Through-hole Mount Low Profile (4.4 mm) Embossed Tape (SMD) or Bulk packaging (Through hole) Reflow Soldering capability Shaft insertable
More informationISA-WELD // Precision resistors. BRS // Size Features
Features 2 W power rating at 2 C Constant current up to 32 A (2 mohm) copper connectors Solid metal precision resistance materials Excellent long-term stability Ideal suited for mounting on DBC / IMS substrate
More informationData Sheet for Precision Resistors
Epoxy Coating Inorganic Coating Nickel Plating Resistive Element Terminal, Tin Plated Ultra Precision Thin Film NiCr Chip Resistor Advanced Thin Film Technology Best Long Term Stability for NiCr Low Noise
More informationSENTRAN. Low Profile Load Cell. For more information call
SENTRAN Low Profile Load Cell PFSeries The PF Series is a high performance, low profile, strain gage load cell constructed of stainless steel. The PF Series is designed to accurately measure compression
More informationCRM-A Series High Power Thick Film Resistor
*RoHS COMPLINT, **HLOGEN FREE & EC-Q200 COMPLINT Features n Thick film technology n Power rating up to 2 watts at 70 C n High power surge withstanding n Sulfur-resistant design (STM -809) n RoHS compliant*
More informationYG-B Series. Single Point Load Cell
Single Point Load Cell YG-B Series The YG-B Series is a high performance strain gage load cell constructed of aluminum alloy. It is designed to accurately measure compression loads in capacity ranges of
More informationSENTRAN. Low Profile Load Cell. For more information call
SENTRAN Low Profile Load Cell PASeries The PA Series is a miniature, low profile, strain gage load cell constructed of stainless steel. The PA Series is designed to accurately measure compression loads
More informationCal-Chip Electronics, Incorporated Thick Film Chip Resistors - RM Series
Thick Film Chip Resistors - RM Series Fixed Chip Resistors manufactured for more compact electronic components and automatic mounting system. These Chip Resistors have electrical stability and mechanical
More informationResistance WIREWOUND. Wiper Travel NO. OF TURNS 0.5 W 25 ± 2. 3 typical; 10 maximum
Accutrim 0 Vishay Foil esistors Bulk Metal Foil Ultra High Technology Precision Trimming Potentiometers, / 4 " ectilinear, J Style, Designed to Meet or Exceed The equirements of MIL-PF-097, Char. F with
More informationGeneral Purpose Chip Resistors MCMR Series
Description The resistors are constructed in a high grade ceramic body (aluminium oxide). Internal metal electrodes are added at each end and connected by a resistive paste that is applied to the top surface
More informationSolutions for the Steel Industry. Market Solutions
Solutions for the Steel Industry Market Solutions A Complete Solution BLH Nobel offers both standard and custom made systems and solutions for force, tension and weighing for the steel industry. Our solutions
More information3M Pin Strip Header 2 mm and 2 mm x 2 mm Straight, Surface Mount 951 Series
3M Pin Strip Header 2 mm and 2 mm x 2 mm Straight, Surface Mount 951 Series High temperature dielectric No lead reflow solder compatible Maximizes use of PC board space End stackable feature Mates with
More informationISA-WELD // Precision resistors. BVS Size Features
BVS Size 3920 Features Power rating up to 2 W continuous current load up to 60 A (0.2 mohm) Heavy copper connectors Excellent long-term stability Max. solder temperature up to 350 C / 30 sec AEC-Q200 qualified
More informationR-Series. Lead Wire Length (H, mm)
Carbon Film Fixed Resistor Specifications Per I E C 6 0 1 1 5-1, I E C 6 0 1 1 5-4 d L H D MIL-R-10509 Features Conformal multi-layer coating (flame proof coating available) Color code per MIL & EIA standards
More informationSENTRAN. Low Profile Load Cell. For more information call
SENTRAN Low Profile Load Cell PASeries The PA Series is a miniature, low profile, strain gage load cell constructed of stainless steel. The PA Series is designed to accurately measure compression loads
More information