DISTRIBUTED BY / DISTRIBUÉ PAR:

Transcription

1 DISTRIBUTED BY / DISTRIBUÉ PAR:

2 NSTAT(67828) ESD ADJUSTABLE ELASTIC WRIST STRAP PART NUMBER: NS-106 Width: Elastic Nylon with conductive plated threads 19mm Decay Time Resistivity: Less than 0.05 sec <1.0x106 +/- 5% Elasticity: Expansion ratio 1.5:1 Snap/Size: 7mm post snap for ground cord Color: Light Blue Meets or exceeds: DOD-HDBK-263, DOD-STD-1686, EOS/ESD Std. No , EN10015/1 CORD ASSEMBLY Resistor: One meg ohm (±10%) resistor molded into snap connection Ground Connection: Standard banana plug Warranty: Cord Extension: Warranted for One Year against mechanical and electrical defects. Full extension greater than 13 feet; Working Length greater than 10 feet.

3 ESD ANTI ALLERGIC WRIST STRAP PART NUMBER: NS-110 Width: Elastic Nylon with conductive plated threads 19mm Decay Time Resistivity: Less than 0.05 sec <1.0x106 +/- 5% Elasticity: Expansion ratio 1.5:1 Snap/Size: 7mm post snap for ground cord Color: Light Blue Feature: Wrist band without metal part, can prevent rashes. CORD ASSEMBLY Resistor: One meg ohm (±10%) resistor molded into snap connection Ground Connection: Standard banana plug Warranty: Cord Extension: Warranted for One Year against mechanical and electrical defects. Full extension greater than 13 feet; Working Length greater than 10 feet.

4 ESD ADJUSTABLE ELASTIC WRIST STRAP PART NUMBER: NS-300 Width: Elastic Nylon with conductive plated threads 19mm Decay Time Resistivity: Less than 0.05 sec <1.0x106 +/- 5% Elasticity: Expansion ratio 1.5:1 Snap/Size: 7mm post snap for ground cord Color: Green Meets or exceeds: DOD-HDBK-263, DOD-STD-1686, EOS/ESD Std. No , EN10015/1 CORD ASSEMBLY Resistor: One meg ohm (±10%) resistor molded into snap connection Ground Connection: Standard banana plug Warranty: Cord Extension: Warranted for One Year against mechanical and electrical defects. Full extension greater than 13 feet; Working Length greater than 10 feet.

5 NSTAT(67828) ESD METAL BAND WRIST STRAP PART NUMBER: NS-200 Made from jewelry quality stainless steel, non-rusting, tested to MIL STD 202 Method 101 Thickness: 3.5mm, average weight 33 grams Manufactured to 130mm circumference with 5 10mm nylon expansion l links Electrical Properties: Outer band: insulated at 500V per unit millimeter, coating is polyurethane based polymer Inner band: Conductive - <1.0x104 Elasticity: Expansion ratio 1.5:1 Snap/Size: 7mm post snap for ground cord, non rusting, tested to MIL STD 202 Method 101 Color: Black Meets or exceeds: DOD-HDBK-263, DOD-STD-1686, EOS/ESD Std. No , EN10015/1 CORD ASSEMBLY Resistor: One meg ohm (±10%) resistor molded into snap connection Ground Connection: Standard banana plug Warranty: Warranted for One Year against mechanical and electrical defects. Cord Extension: Full extension greater than 13 feet; Working Length greater than 10 feet.

6 D RING HEEL GROUNDER PART NUMBER: NS-917RC 0.16mm thick, two-layer laminated rubber sole. Inner layer antistatic neoprene, outer black layer is conductive Neoprene. 1 cm wide, 45cm long nylon ribbon contains 8 electrically conductive yarn 20mm wide black loop material with return hook tip for quick and easy adjustment and operator comfort. ¼ watt, 1meg ohm interior resistor. Resistor: Sole: black conductive side: 10e3 10e5 ohm Antistatic side: 10e8 10e9 ohm Nylon fabric grounding tab: 10e3 10e5 ohm Grounding Resistance: Color: 1 meg resistor 1 x 10e6 10e7 ohm White interior / black Warranty: Warranted for One Year against mechanical and electrical defects.

7 TOE GROUNDER PART NUMBER: NS-911R Stretch adjustable elastic band for comfort. 1mm Conductive Rubber 1.6mm two layers anti-slip conductive rubber Resistivity: Color: Sole: 10e4 10e6 ohm / sq Grounding: 10e6 ohm +/- 5% Black Warranty: Warranted for One Year against mechanical and electrical defects.

8 ESD WHITE LAB COAT PART NUMBER: NS-4600 SERIES Material: Type: Surface Resistivity: 98% Polyester, 2% Carbon Suffused Nylon 4oz. Soil-Release resin finish woven fabric 3.3 x 10e6 Ohm Sq. Decay Rate: Stitching: Weight: Wash/wear durability: Color: Sizes: Part number: 5000 volts to effective 0 volts in less than.01 seconds Conductive Inner Thread 152 +/- 5gsm 52 washes with very mild soap White X-Small to 2X(other sizes are available on special orders) NS XSW(x-small), NS SMW(small), NS MDW(medium), NS LGW(large) NS XLW(x-large), NS XXL(2X-large)

9 ESD BLUE LAB COAT PART NUMBER: NS-4700 SERIES Material: Type: Surface Resistivity: 98% Polyester, 2% Carbon Suffused Nylon 4oz. Soil-Release resin finish woven fabric 3.3 x 10e6 Ohm Sq. Decay Rate: Stitching: Weight: Wash/wear durability: Color: Sizes: Part number: 5000 volts to effective 0 volts in less than.01 seconds Conductive Inner Thread 152 +/- 5gsm 52 washes with very mild soap Electric Blue X-Small to 2X(other sizes are available on special orders) NS XSE(x-small), NS SML(small), NS MDE(medium), NS LGE(large) NS XLE(x-large), NS XXL(2X-large)

10 ESD GREEN LAB COAT PART NUMBER: NS-4800 SERIES Material: Type: Surface Resistivity: 98% Polyester, 2% Carbon Suffused Nylon 4oz. Soil-Release resin finish woven fabric 3.3 x 10e6 Ohm Sq. Decay Rate: Stitching: Weight: Wash/wear durability: Color: Sizes: Part number: 5000 volts to effective 0 volts in less than.01 seconds Conductive Inner Thread 152 +/- 5gsm 52 washes with very mild soap Green X-Small to 2X(other sizes are available on special orders) NS XSE(x-small), NS SME(small), NS MDE(medium), NS LGE(large) NS XLE(x-large), NS XXL(2X-large)

11 ESD BLUE LAB COAT PART NUMBER: NS-5000 SERIES Material: Type: Surface Resistivity: 98% Polyester, 2% Carbon Suffused Nylon Soil & Oil release finish 10e5 10e6 Decay Rate: Stitching: Weight: Wash/wear durability: Color: Sizes: Part number: 5000 volts to effective 0 volts in less than.01 seconds Conductive Inner Thread 115 +/- 5gsm 100 washes with very mild soap Blue X-Small to 2X(other sizes are available on special orders) NS XSE(x-small), NS SME(small), NS MDE(medium), NS LGE(large) NS XLE(x-large), NS XXL(2X-large)

12 CONDUCTIVE BLUE TABLE MATTING PART NUMBER: NS-500 SERIES Thickness: Hardness: Dual Layer Rubber Material 2mm, +/- 0.1mm Top Layer 65, Bottom Layer 66 Tensile Strength: Top Layer 114 kg/. Bottom Layer 112 kg/. Elongation: Top Layer 370%, Bottom Layer 380% Surface Top Layer 10e7 10e8, Bottom Layer 10e4 10e5 Resistivity Static Decay: 5KV 0KV - less than 0.1 seconds Resistance to Ground: Less than 10e8 Roll Length: 10 meters Roll Width: 24, 30, 36, 48 Part numbers: NS ( 24 x 10meters),NS ( 30 x 10meters ),NS ( 36 x 10meters ),NS ( 48 x 10meters) ***We can also cut to size***

13 CONDUCTIVE GREEN TABLE MATTING PART NUMBER: NS-502 SERIES Thickness: Hardness: Dual Layer Rubber Material 2mm, +/- 0.1mm Top Layer 65, Bottom Layer 66 Tensile Strength: Top Layer 114 kg/. Bottom Layer 112 kg/. Elongation: Top Layer 370%, Bottom Layer 380% Surface Top Layer 10e7 10e8, Bottom Layer 10e4 10e5 Resistivity Static Decay: 5KV 0KV - less than 0.1 seconds Resistance to Ground: Less than 10e8 Roll Length: 10 meters Roll Width: 24, 48 Part numbers: NS ( 24 x 10meters),NS ( 48 x 10meters) ***We can also cut to size***

14 CONDUCTIVE GREY TABLE MATTING PART NUMBER: NS-503 SERIES Thickness: Hardness: Dual Layer Rubber Material 2mm, +/- 0.1mm Top Layer 65, Bottom Layer 66 Tensile Strength: Top Layer 114 kg/. Bottom Layer 112 kg/. Elongation: Top Layer 370%, Bottom Layer 380% Surface Top Layer 10e7 10e8, Bottom Layer 10e4 10e5 Resistivity Static Decay: 5KV 0KV - less than 0.1 seconds Resistance to Ground: Less than 10e8 Roll Length: 10 meters Roll Width: 24 Part numbers: NS ( 24 x 10meters) ***We can also cut to size***

15 THREE LAYER BLUE TABLE MATTING PART NUMBER: NS-601 SERIES Material: Electrical Properties: Charge Decay 3 layer advanced fusion vinyl / foam 7 PTP: <5.5 X 10 Volts per EOS / ESD e5 10e6 RTG: <5.5 X Volts per EOS / ESD 4.1 Surface Resistivity: < 10 9 per EOS / ESD S11.11 Conditioning: 50% RH +/- 230C +/- 10C for 24 Hours Test 50% RH +/- 230C +/- 10C. Test results = Time, seconds to decay to 10% of initial charge Results: <2.0 seconds 5000 volts to effective 0 volts in less than.01 seconds Physical Properties: Part number: Thickness: 3/8" Colors: Blue NS (24 x 50ft), NS (30 x 50ft), NS (36 x 50ft)

16 COMMON GROUND POINT PART NUMBER: NS-53-CPG Feature: Designed for use at workstations, it provides a common grounding point for one or two wrist straps, as well as table mats and runners. A 3/8 (10mm) stud securely snaps to the mat, and at the other end of the 15 foot cord is a #10 ring terminal

17 FLOOR MAT UFO GROUND PART NUMBER: NS FMG Feature: 15 cord length # 10 ring terminal Low profile prevents easy disconnect Easily snaps to mat for flush connection

18 STATIC DISSIPATIVE SEAMLESS GLOVES NS-NGA220 SERIES PALM COATED NS-NGA221 SERIES TIP COATED Features: Part numbers: Seamless knitted with continuous nylon yarn Provides non slip and eliminates finger print contamination Pu foam coating provides a super grip and abrasion resistance Protects from possible damage of product from chloride of sweat Helps protect the product from harmful static electricity Superior grip and offers excellent ventilation Surface Resistivity: 10e6 10e7 NS-NGA220-SML (small ), NS-NGA220-MED(medium), NS-NGA220-LG(large), NS-NGA220-XL(x-large) NS-NGA220-2XL(2xlarge) NS-NGA221-SML (small), NS-NGA221-MED(medium), NS-NGA221-LG(large), NS-NGA221-XL(x-large) NS-NGA221-2XL(2xlarge)

19 ESD HIGH TEMPERATURE KAPTON TAPE PART NUMBER: T-805-AS SERIES Thickness: Substrate: Adhesive to steel: Die electric strength Operating Temp: Elongation at break Tensile strength Length Static charge Low static polyimide ( Kapton ) film 2.5mil 1mil polyimide film 22 oz/in 7000 volts Up to 600F 60% 32 lbs/in 36yards Removal from roll less than 150V Removal from PCB less than 50V Order Part # : T-805-AS-1/4 (¼ x 36 yards) T-805-AS-1/-2 (½ x 36 yards) T-805-AS-3/4 (¾ x 36 yards). Call office for more sizes.

20 ESD HIGH TEMPERATURE MASKING TAPE PART NUMBER: NS Thickness: Adhesive Backing: Crepe paper, natural rubber 8 mil Natural Rubber Crepe paper Adhesive to steel: 31 oz/in Tensile strength Temperature: 32 lbs/in 160 / 180 Celcius, 1 hour Elongation: 10% Color: Light yellow Length: 36 yards Order part # NS /2 (½ x 36 yards) NS /4 (3/4 x yards)

21 ESD FLOOR TAPE PART NUMBER: NS-2435FL Width: Length: Appearance: Scuff resistant vinyl plastic combined with quick-stick adhesive 3 inch 54 feet Bright yellow vinyl, large black letters

22 ESD GRID TAPE PART NUMBER: NS-221 SERIES Thickness: Charge Decay: Peel Adhesion: Temp. resistance Core Size: Length Conductive shielding tape Anti Static adhesive copolymer layer 1 x 10e9 Conductive grid layer 10e4 10e5 Anti Static copolymer layer 8x10e12 49 microns sec. 0.45kg / 15mm minimum 60C / 140F maximum 3 inch 36meters Order Part # : NS-221-1/4 ( ¼ x 36meters) NS-221-1/2 (1/2 x 36meters ) NS-221-3/4 ( ¾ x 36meters ) NS (1 x 36meters)

23 ESD STATIC AWARENESS LABELS PART NUMBER: NS Adhesive: Dimension: Qty per roll: 1000 Yellow tint paper label Low tack adhesive 2.00 x 2.00

24 ESD STATIC CAUTION LABELS PART NUMBER: NS-7722 Adhesive: Dimension: Qty per roll: 1000 Yellow tint destructible tamper evident paper label Low tack adhesive 2.00 x 2.00

25 METAL-IN STATIC SHIELDING BAG Electrical Properties: Surface Resistivity Interior: <10e12 ohms/sq using ASTM D257 Exterior:<10e12 ohms/sq using ASTM D257 Metal: 100 ohms Static Shielding < 30volts MIL-PRF-81705,EIA 541 Static Shielding < 10nj EOS/ESD S11.31 Static Decay < 0.05 sec MIL-PRF-81705, FTMS 101 MTH 4046 Physical Properties: Part numbers: Tensile strength >25lbs ASTM D 882 Seam Strength Pass MIL-PRF Light Transmission 40% TOBIAS Temperature range: 250F 375F, seconds Pressure PSI Thickness 3.1mil Please call office of a full range of sizes

26 METAL-OUT STATIC SHIELDING BAG Electrical Properties: Surface Resistivity Interior: >10e5 < 10e12 ohms/sq using ASTM D257 Exterior:<10e5 ohms/sq using ASTM D257 Metal: 100ohms Static Shielding < 30volts MIL-PRF-81705,EIA 541 Static Shielding < 10nj EOS/ESD S11.31 Static Decay < 0.05 sec MIL-PRF-81705, FTMS 101 MTH 4046 Charge Retention <100 volts Physical Properties: Part numbers: Tensile strength >20lbs ASTM D 882 Seam Strength Pass MIL-PRF Light Transmission 40% TOBIAS Temperature range: 250F 375F, seconds Pressure PSI Thickness 3.1mil Please call office of a full range of sizes

27 PINK BAG Features: Pink Color identifies as pink poly Low charging ( antistatic ) and dissipative Excellent for applications requiring a tougher bag Surface Resistance: < 10e11 ohms Thickness: 2mil and 4 mil Open and Zip lock Part numbers: Please call office of a full range of sizes

28 ESD PAPER Typical Test Data Physical: Base Weight (3000 sq. ft) 20# 40# Caliper (mils) Tear MD/CD 30 / / 32 Tensile MD/CD 22 / / 14 Sheffield smoothness FS / WS 50 / / 50 Brightness (%) Opacity (%) Resistivity (@ 50% RH) 5 x 10e7 5 x 10e7 Resistivity (@ 20% RH) 6 x 10e9 6 x 10e9 Typical Test Data PH (acid level) Chloride (CI) Chemical: Nitrate (NO3) Amine(NH2 R) Sodium(Na) Sulfate(SO4) 7.02 (neutral) < 100ppm < 10ppm < 55ppm < 85ppm < 100ppm Standard Sizes: 8 ½ x x 17 A4 metric Can be supplied blank or pre-printed