Section Page

Transcription

1 WELDING Section Page MIG Arc 765 Stick 765 Inverter Welders TIG & MMA 766 Plasma Cutting 766 Consumables Accessories 768 Rods 768 Soldering Irons 769 Curtains 769 Helmets & Goggles

2 MIG WELDING 230v 120amp Gas/Gasless Turbo MIG Welder Uses both solid or filler wire with a flux core, during the weld process the flux melts and protects the weld, therefore no gas is required to shield the weld pool, making it ideal for use outdoors in windy conditions Non-live direct fit safety torch 4 stage power setting Variable wire speed control Earth clamp Polarity switch Complete with face mask, spool of 0.9mm flux cored wire, gas hose and wire brush, BS approved non-rewireable 3 pin moulded plug and cable Rated maximum supply current: 19amp Rated efficiency supply current: 7.5amp Wire sizes: mild steel mm stainless steel 0.8mm aluminium 0.8mm flux cored 0.9mm Maximum welding thickness: mild steel 4mm Wire spool capacity: up to 5Kg Amperage Part No Output (amp) No Load Voltage at 60% duty Dimensions (mm) Weight (Kg) MW122AT x 230 x v 150amp Gas/Gasless Turbo MIG Welder Non-live direct fit safety torch 6 stage power setting Variable wire speed control Earth clamp Polarity switch Complete with wheel kit, 0.9/1.2mm and 0.6mm wire feed rollers, spool of 0.9mm flux cored wire, adaptor for disposable bottle regulators and supports for refillable gas bottles Rated maximum supply current: 25amp Rated efficiency supply current: 7.5amp Wire sizes: mild steel mm stainless steel 0.8mm aluminium 0.8-1mm flux cored 0.9mm Maximum welding thickness: mild steel 5mm Wire spool capacity: up to 5Kg Amperage Part No Output (amp) No Load Voltage at 60% duty Dimensions (mm) Weight (Kg) MW162AT x 450 x v 300amp Gas Turbo MIG Welder Euro torch connector 12 stage power setting Variable wire speed control Spot weld timer, burnback, soft start, 2T and 4T modes Earth clamp Reinforced bottle holder Complete with wheel kit, 0.6/0.8mm and 1/1.2mm wire feed rollers, gas bottle holder and chain restraints, 1.5M of gas hose, swivel joint Euro fit welding torch and earth clamp Rated maximum supply current: 42amp Rated efficiency supply current: 21.5amp Wire sizes: mild steel mm stainless steel mm aluminium mm Maximum welding thickness: mild steel 10mm Wire spool capacity: up to 15Kg Amperage Part No Output (amp) Open Circuit (v) at 60% duty Dimensions (mm) Weight (Kg) MW302AT PRO x 520 x 1, ,

3 MIG WELDING MIG 130 Welder A very popular, turbo fan-cooled MIG unit with non-live MIG torch and a work return clamp The MIG 130 will operate from a 230v 1phase supply and will weld 0.6mm to 0.8mm mild steel wire up to 5Kg reels Portable and ideal for DIY, car body and light repair TWN Multi-purpose machine suitable for the semi-professional and home user Stepless amperage adjustment Direct fit electrode holder and earth lead Complete with face mask and combined chipping hammer/wire brush 230v 140amp Turbo Arc Welder Rated maximum supply current: 31amp Rated efficiency supply current: 12amp Output amperage range: amp Electrode size: mm No load voltage: 48v Overall size: 390 x 210 x 280mm Weight: 15Kg Part No AW142AT ARC WELDING Suitable for heavy duty use, eg. workshop and agricultural applications Stepless amperage adjustment Direct fit electrode holder and earth lead Complete with wheel kit and transport handle, face mask and combined chipping hammer/wire brush 230v 160amp Turbo Arc Welder Rated maximum supply current: 36amp Rated efficiency supply current: 14amp Output amperage range: amp Electrode size: 1.6-4mm No load voltage: 48v Overall size: 610 x 320 x 400mm Weight: 19.3Kg Part No AW162AT Extra heavy duty suitable for tough daily use in industrial and agricultural environments Dual voltage 230/400v (single phase) Stepless amperage adjustment Detachable electrode holder and earth lead Complete with wheel kit, transport handle, face mask and combined chipping hammer/wire brush A portable air-cooled 230v 1phase AC stick welding package for light duty DIY and repair 140amp 230/400v 200amp Turbo Arc Welder Rated maximum supply current: 34amp (230v) Rated efficiency supply current: 14amp (230v) Output amperage range: amp Electrode size: 1.6-5mm No load voltage: v Overall size: 610 x 320 x 400mm Weight: 19.7Kg Part No AW222AT Moderna 150 AC MMA Stick Welder Includes MMA selected accessories TWN STICK WELDING 765

4 INVERTER WELDERS - TIG & MMA Professional Weldmate T200 Inverter/TIG Capable of use in both DC MMA and DC TIG modes Enables the use of standard and specialist electrodes in MMA mode and also offering the ability to weld mild and stainless steels, alloy steels, copper and bronze in TIG mode Inverter technology providing 170amps DC TIG/MMA welding for maximum flexibility DC TIG mode offers precision welding of mild and stainless steels, alloy steels, copper and bronze Input voltage detection Load sensing circuit automatically reduces input current when machine is not under load Scratch start Dinse plug connectors - faster more secure and convenient connection for electrode holder, earth clamp attachment and TIG torch where applicable Generator friendly - withstands voltage spikes up to 300v Lightweight and superb portability weighing only 4.5Kg 1 year parts warranty TIG 155 DC HF TIG Inverter Welder A single phase, portable, fan-cooled, inverter welder for TIG and MMA welding in DC with high frequency (HF) and LIFT arc striking modes An ideal entry level power source, which provides 130amp@35% maximum output A remote control can be also connected TWN TIG 155 DC HF TIG inverter TWNTIG165 TIG torch kit (160amp DC HF 16mm) PLASMA CUTTING Super Plasma 80/3HF 20mm Cutter A 400v 3PH plasma cutting package with high-frequency (HF) arc ignition An electromechanical, industrial unit which cuts up to a maximum thickness of 20mm (mild steel) and cuts all types of conductive material Features 2 cutting power settings, a built-in regulator, vapour-trap and 6M torch TWN /3HF 3Hp 20mm super plasma cutter 2, TWN Standard nozzles - pack of TWN Long nozzles - pack of TWN Standard electrodes - pack of TWN Long electrodes - pack of TWN Safety cup (Shroud) - pack of TWN Spacer (Standoff) - pack of Tecnica Plasma 34 Kompressor Plasma Cutter This complete, portable inverter plasma solution is supplied with a built-in air compressor and will work from a 230v single phase supply Weighs just 12Kg but will cut mild steel to a maximum of 6mm thickness Ideal for DIY, autobody, maintenance and repair applications and is simple to operate Includes a 6M contact-cut plasma torch and vapour trap A range of replacement consumable torch spares is available TWN Tecnica plasma 34 Kompressor plasma cutter 1, TWN Standard nozzles - pack of TWN Standard electrodes - pack of TWN Safety cups - pack of

5 For large gas bottles suitable for use with Draper gas MIG welders, TIG welders and other manufacturers gas welders 230Bar Gas Bottle Regulator with 2 Gauges WELDING CONSUMABLES Part No W473B Complete equipment packages for oxy/fuel welding and cutting The package only excludes gas bottles Contents:- Regulators, flashback arrestors, shank, mixer, cutting attachment, hoses, a selection of nozzles, tools, goggles and trolley Cutting and Packages Cutting Nozzles BB1007 Heavy duty portagas BB2007 Lightweight portagas Thickness Type (mm) Lightweight AFN Oxy/Acetylene CCAFN01 AFN CCAFN02 AFN CCAFN03 AFN Heavy Duty ANM Oxy/Acetylene CCANM01W ANM CCANM02W ANM CCANM03W ANM Thickness Type (mm) Heavy Duty PNM Oxy/Propane CCPNM01W PNM CCPNM02W PNM CCPNM03W PNM For mixers Thickness No (mm) Lightweight Mixer CCLW CCLW CCLW CCLW Swaged Nozzles Thickness No (mm) CCLW CCLW Heavy Duty Mixer CCSW CCSW Thickness No (mm) CCSW CCSW CCSW CCSW Mild Steel Mig Wire SG2 grade layer-wound A18, copper coated mild steel MIG wire in a range of reel sizes and diameters Wire Reel Diameter (mm) (Kg) VZ180607L VZ180807L VZ180650L VZ180850L Wire Reel Diameter (mm) (Kg) VZ180815LW VZ181015LW VZ181215LW Mild Steel MMA Electrodes 6013 is a general purpose mild steel welding electrode 7018 is a low-hydrogen mild steel welding electrode Size Weight Description (mm) (Kg) 6013 TX Superweld TX Weldability TX Weldability TX Weldability TX Weldability Size Weight Description (mm) (Kg) 7013 TX Weldability TX Weldability TX Weldability

6 WELDING CONSUMABLES Anti-Spatter Water Based Spray A water-based, silicone-free, non-toxic, nonflammable anti-spatter solution that does not contain harmful solvents which can smoke and produce harmful fumes Does not effect weld porosity Use to prolong tip and shroud life and to prevent adhesion of weld spatter to the area surrounding the weld zone Size EG1001W 400ml 2.65 EG W 1ltr 4.80 EG1001BLK 25ltr FXTIPDIP50 500g SIF Tip Dip 6.90 WELDING ACCESSORIES 3 Piece Self Grip Clamp Kit Manufactured from good quality steel, nickel plated Quick release lever Contents:- Sheet metal clamp length: 240mm clamp length: 280mm C clamp length: 275mm Part No K Welders Chipping Hammer with Spring Handle Designed to remove weld slag from welding joints and work The spring allows for extra flexibility and is designed as a shock absorber Essential tool for all welders Welders Chipping Hammer with Hickory Handle Designed to remove weld slag from welding joints and work A pointed and a vertical chisel end Essential tool for all welders Weight Model (oz) (gm) W Weight Model (oz) (gm) W Handy TIG Pen An innovative tool for TIG welders to improve weld bead consistency and appearance and improve welding efficiency, by delivering an optimal feed rate of the TIG filler wire Durable and lightweight and is suitable for use with all TIG wire alloys/grades from 1mm to 3.2mm diameter EV WELDING RODS TIG Rods A range of popular grade TIG welding rods for aluminium and stainless steel 1M length rods in a variety of diameters SIFALUMIN Nº A - Aluminium RO mm, 2.5Kg RO mm, 2.5Kg RO mm, 2.5Kg SIFSTEEL 316L Stainless Steel RO mm, 5Kg RO mm, 5Kg RO mm, 5Kg

7 Manufactured to BS EN specifications Designed for continuous use in industrial environments 230v Professional Soldering Irons Complete with tip and BS approved 3 pin plug 1.5M (approx) of cable SOLDERING IRONS Part No Description Power (w) Voltage K12/PRO Iron Fine Tip Medium Tip Large Tip K18/PRO Iron Fine Tip Medium Tip Large Tip K25/PRO Iron Fine Tip Medium Tip Large Tip x 6M solid frame Curtains fitted with envelope seams to slide over frame uprights EZ6X6LG is manufactured to EN1598 Conforms to EN179/379 and CE approved Professional users helmet with solar powered automatic shading facilities when weld is struck Adjustable shading from 9-13EW Adjustable headband Curtains and Frames EZ Economy frame EZ6X6C Green canvas curtain EZ6X6LG Green lo-vis curtain Solar Powered Auto-Varioshade Helmets filter: UV/IR protected Shading: 9-13EW Viewing area: 96 x 40mm Switching time: within secs Weight: 500g Part No WELDING CURTAINS WELDING HELMETS & GOGGLES W411D W411E Browguard and Visors Sturdy industrial facescreen with a screw-fix fitting 200mm visor offering exceptional protection Available with shade 3, 4 or 5 green acetate 200mm front Also available in shades 4 and 5 green acetate 250mm CE approved to EN166-1F3 G-D M2000 headband and browguard G-D M2000 8'' clear polycarb visor 7.08 G-D763378/05 M2000 8'' shade 5 green visor Helmet Industry standard fibreglass headshield for the welding professional 108mm x 83mm lens Available in three lens fittings CE approved to BS 1542 G-D helmet empty

8 WELDING HELMETS & GOGGLES Handshields Industry standard fibreglass handshield 108mm x 83mm lens Available in three lens fittings CE approved to BS 1542 G-D welding handshield empty Cobra Visors Conforms to EN175:1997 B 9 Engineered and built to exacting standards, the Cobra welding visor is constructed to a very high specification from engineering grade nylon 66 Cobra has been designed with the user firmly in mind and has many unique features, which not only increase user safety but comfort as well Quick change anti-spatter screen 3-point stability when face-down 5-point wearing angle adjustment Lock up/lock-down lift mechanism Switching time: 1/25,000 seconds from light to dark Swinging wheel ratchet for comfort and security User adjustable multi-shade 9-13 autodarkening lens Sensitivity adjustment AFD AFL Cobra welding visor DIN Cobra welding/grinding visor DIN Jetstream Chameleon Shield Complete with internal hood visor using the Chameleon solar powered automatic darkening welding shield Conforms to BS EN 12941:1999 TH2 CBH Multi-C-Air Clean Air System The lightest weight powered air-purifying respirator system in its class Features an innovative vibrating alert, for highest safety level Electronically-regulated to ensure continuous airflow Adjustable dual-speed air supply of 160ltr/min and 200ltr/min Fast charge time - under 4 hours Removable/replaceable Li-Ion battery with an 8-hour capacity Includes your choice of multi-vision helmet, a battery charger, spare P3 filter and sports bag SIFLite Auto-Darkening Helmet Variable-shade, auto-darkening welding helmet Adjustable sensitivity and variable delay (0.1second - 0.9second) Comfortable headgear and large viewing area Fast switching speed of 1/10,000second Adjustable welding shade from 9-13 Multi-vision has a large viewing area of 98 x 44mm Suitable applications - from 5amps, MMA, MIG, AC/DC TIG and Pulsed EV Multi-C-Air with MV deluxe blue EV Multi-C-Air with MV deluxe black EV Multi-C-Air with MV deluxe silver EV Multi-C-Air battery (spare) EV Multi-C-Air P3 filter EV P Multi-C-Air pre-filter (10 pack) EV Multi-vision deluxe ADF blue EV Multi-vision deluxe ADF black EV Multi-vision deluxe ADF silver Suitable for MIG, Arc and TIG >50Amps CE approved to meet EN379, EN175 and ANSI Z87.1 FXADF913 SIFLite ADF helmet 9-12 variable ES1190P10 CR lens (CE) 110 x 90 Clear x EH Hornell type lens 103 x 47 (Pk 5) 7.00 Panoramic Shade 5 UV/IR Goggle Panoramic vision, indirect vent shade 5 goggle with soft comfort frame and wide, elasticated adjustable headband CE approved to EN175 G-PANOWELD Royale Goggle 108 x 50mm aperture box type indirect vent goggle with PVC housing and glass lens Excellent ventilation, comfortable and versatile CE approved to EN175 G-M8507/