TORPEDO SPECIALTY WIRE
|
|
- Moses Hamilton
- 6 years ago
- Views:
Transcription
1 70,000 SQ FT FACILITY! PUBLIC AUCTION Surplus to the Ongoing Operations of TORPEDO SPECIALTY WIRE 13 AVAILABLE 2008 REBUILT 2013 OVER $41K USD HP1-HP13 fine & flat wire plating lines VAUGHN MOTOBLOX HRV 6/7HR 6-block wire drawing line SYNCRO C12 12-die medium wire drawing and annealing line REBUILT 2013 OVER $110K COULTER & MCKENZIE C station spooler re-winder SYNCRO F13 13-die rod breakdown line MEDIUM & FINE SPECIALITY WIRE MANUFACTURER DATE TIME LOCATION Tuesday, November 1, :30 A.M. EST 1115 Instrument Drive, Rocky Mount, North Carolina, This auction is ONSITE ONLINE SALE HELD PROUDLY IN CONJUNCTION WITH LIVE WEBCAST powered by
2 WELL MAINTAINED DRAWING, ANNEALING AND PLATING LINES AVAILABLE RETROFIT PLC CONTROL annealing line RETROFIT DURAPULSE GS3-40/50 DIGITAL VFD SYNCRO BG16 16-die fine wire drawing and wire annealing line 3 AVAILABLE annealing line 16 TUBE & 1750 F CAPACITY SA #1 electric multi strand fine wire annealing line annealing line 6 AVAILABLE VAUGHN MOTOBLOX 6/7HIV wire drawing line WIRE DRAWING LINES REBUILT 2013 OVER 21K USD RAPID POWER TECHNOLOGIES #P7 fine wire plating line MEDIUM AND FINE WIRE DRAWING & ANNEALING LINES VAUGHN MOTOBLOX HRV 6/7HR 6-block wire drawing line with RELIANCE drive controls; 24 /18 blocks; 28 finish with riding stripper; (6) 30 HP motors; overhead un-coiler; traversing spooler re-winder; s/n 9024 VAUGHN MOTOBLOX 6/7HIV wire drawing line with 14 /11 blocks; 15 finish with riding stripper; 10 HP motors; re-winder; s/n SYNCRO (REBULIT 2013 OVER $110K) F13 13-die rod breakdown line with 300 HP motor; HALL INDUSTRIES traversing spooler re-winder; s/n F13/104 annealing line consisting of RESISTONEAL annealer; dip tank; annealing oven; SYNCRO re-spooler; s/n 749 8Y43.9 SYNCRO (REBUILT 2013 OVER 41K USD) C12 12-die medium wire drawing and annealing line with SECO MENTOR II touch screen PLC control; DURAPULSE GS3-40/50 digital VFD drive; consisting of RESISTONEAL annealer; spool carrier; dip tank; annealing oven; SYNCRO re-spooler; s/n n/a annealing line with DURAPULSE GS3-40/50 digital VFD drive; consisting of RESISTONEAL annealer; spool carrier; dip tank; annealing oven; SYNCRO re-spooler; s/n n/a SA #1 electric multi strand fine wire annealing line with 3-zone digital heat control; consisting of 16 tube capacity, 20 x 37 electric annealing oven with 1750 degrees F max temperature; 125 FPM capacity; quench tank; 10- station floor type uncoilers; roll type accumulator; 16-station spooler re-winder; s/n n/a 2 This brochure is only a partial listing. PLEASE VISIT OUR WEBSITE
3 LATE MODEL FLAT ROLLING, DRAWING & PLATING LINES AVAILABLE AVAILABLE HP1-HP13 fine & flat wire plating lines.004 TO.040 CAPACITY RM-8 3-stand flat wire rolling mill line 3 AVAILABLE.004 TO.020 CAPACITY.004 TO.020 CAPACITY RM-5 flat wire rolling mill line RM-9/RM-10 tandem flat wire rolling mill line.004 TO.020 CAPACITY RM-6 flat wire rolling mill line MOTORTRONICS single block wire drawer Medium wire single block drawing line FINE WIRE PLATING LINES SPECIALTY FLAT WIRE ROLLING MILL LINES (13) HP1-HP13 (2008) fine & flat wire plating lines with PANELVIEW PLC touch screen controls; consisting of: standalone powered pay-off; roll type accumulator; composite clean and flux dip tanks; stainless steel electric melting pot with starter; programmable dip & air wipe coater; tensioner; spooler re-winder; s/n n/a RAPID POWER TECHNOLOGIES (REBUILT 2013 OVER 21K USD) #P7 fine wire plating line consisting of uncoiler stand; roll type accumulator; composite plating dip tanks; RAPID TECHNOLOGIES 3000 AMP rectifier; RAPID TECHNOLOGIES 1500 AMP rectifier; spooler re-winder; s/n n/a RM-8 3-strand flat wire rolling mill line with.004 to.040 thickness capacity;.060 to.300 width capacity; 40:1 max width to thickness ratio; consisting of: (3) WATERBURY FARREL 4 horizontal rolling mills; 4-strand accumulator/ tensioner; annealing chamber; down stream tensioner; 20 & 25 HP VFD s; power uncoiler & power pay-off; s/n n/a RM-5 flat wire rolling mill line with.004 to.020 thickness capacity;.030 to.100 width capacity; 20:1 max width to thickness ratio; consisting of: 1 horizontal rolling mills; 4-strand accumulator/tensioner; 10 annealing chamber; down stream tensioner; power uncoiler & power pay-off; s/n n/a RM-9/RM-10 tandem flat wire rolling mill line with.004 to.020 thickness capacity;.030 to.125 width capacity; 20:1 max width to thickness ratio; consisting of: (2) AD- 1526DC1300-TOR-US rolling mills; 4-strand accumulator/ tensioner; annealing chamber; down stream tensioner; (2008) DURA SPEED VFD s; power uncoiler & power payoff; s/n n/a RM-6 flat wire rolling mill line with.004 to.020 thickness capacity;.030 to.100 width capacity; 20:1 max width to thickness ratio; consisting of: 1 horizontal rolling mills; 4-strand accumulator/tensioner; 10 annealing chamber; down stream tensioner; power uncoiler & power pay-off; s/n n/a FOR MORE DETAILED LISTINGS AND PHOTOS. 3
4 LARGE SELECTION OF TRAVERSING SPOOLERS AVAILABLE VAUGHN traversing spooler Automatic traversing spooler SYNCRO traversing spooler SYNCRO traversing spooler SYNCRO traversing spooler Partial view of medium wire spoolers 5 AVAILABLE Partial view of fine wire traversing spoolers 1500 F CAPACITY 2 AVAILABLE OMEGA DIGITAL CONTROL 13 AVAILABLE 16-station spooler re-winder INDUSTRONICS single zone electric bell furnace Partial view of payoffs w/ accumulators DRAW LINES 13 AVAILABLE 13 AVAILABLE Partial view of hot melt dip Partial view of clean & flux composite tanks tanks with air wipe systems SYNCRO BG16 16-die fine wire drawing and wire annealing line consisting of RESISTONEAL annealer; dip tank; annealing oven; SYNCRO re-spooler; s/n n/a SYNCRO BG16 16-die fine wire drawing and annealing line with retrofit DURAPULSE GS digital VFD drive; consisting of RESISTONEAL annealer; dip tank; annealing oven; SYNCRO respooler; s/n n/a INDUSTRONICS single zone electric bell furnace with OMEGA digital temperature control; OMEGA temperature recorder; 1500 degrees F max temperature; 100 KW 2-station heater; s/n n/a CONTACT TO CONSIGN EQUIPMENT AT AN UPCOMING AUCTION 4
5 LARGE OFFERING OF PRODUCTION SUPPORT EQUIPMENT VAUGHN combination heavy duty pointer stringer VAUGHN 10-groove horizontal roll pointer VAUGHN 10-groove horizontal roll pointer MICROWELD wire butt welder MICROWELD wire butt welder Partial view of wire butt welders 15 AVAILABLE APPROX 45,000 LBS AVAILABLE.219 to.351 diameter; C1006AK low carbon steel coil APPROX 30,000 AVAILABLE Partial view of HAFNER K125 & K160 composite spools Partial view of spools available COMPOSITE SPOOL INVENTORY (14,000+) HAFNER K125- DIN composite spools with 4.9 flange diameter; 3.9 traverse width; 3.1 barrel diameter; 0.63 arbor hole; 4.9 overall width (600+) 6x4 composite spools with 6.0 flange diameter; 4.0 traverse width; 4.0 barrel diameter; 0.63 arbor hole; 4.8 overall width HEZEL pneumatic shear KOLDWELD welders Partial view of welders available MILLER portable TIG welder (15,000+) HAFNER K160- DIN 160 composite spools with 6.3 flange diameter; 5.0 traverse width; 3.9 barrel diameter; 0.87 arbor hole; 6.3 overall width TO SCHEDULE AN AUCTION CONTACT
6 FOR FURTHER INFORMATION OF SALE, PLEASE VISIT FISCHERSCOPE X-ray coating thickness measuring system MITUTOYO COMFILE digital wire thickness gauge TINIUS OLSEN H1KT tensile and compression tester 4 AVAILABLE LASERMIKE 101 laser micrometer LASERMIKE 182 laser micrometer 18,000 CFM KCH outdoor pad type chemical scrubber INSTRON tensile & compression tester NIKON V12 12 optical comparator BUHLER 1511 rotary table type lapper/polishers 4 AVAILABLE WEIGHTRONIX digital floor scale AUCTION DETAILS LEBLOND 16x36 engine lathe CLAUSING 13x36 engine lathe NIAGARA power rolls INSPECTION Monday, October 31 from 9:00 A.M. to 5:00 P.M. and morning of auction to start of auction. REMOVAL Small items: Wednesday, November 1 by 5:00 P.M. Remaining items: Tuesday, November 15 by 5:00 P.M. PAYMENT Please visit our website for details at A Buyer s Premium will apply at this sale. We Accept Please visit our website as specific terms and conditions may apply. DOALL vertical band saw BRIDGEPORT milling machine TORIT dust collector 25 HP HURST GAS fired steam boiler TERMS Corporate Assets Inc. assumes no liability for errors or omissions in this brochure. Corporate Assets Inc. expressly reserves the right to determine the manner of conducting the auction as it may deem appropriate. All subject to prior sale. Partial view of DOOSAN LPG forklifts SWEED 5 hp scrap wire chopper AUCTION CONDUCTED BY CORPORATE ASSETS INC. For further information contact us at: 74 Berkeley St., Toronto, ON, Canada M5A 2W7 Tel: (416) Fax: (416) info@corpassets.com Web: Toronto Montreal Chicago AFFILIATIONS Printed in Canada CORPORATE ASSETS INC. ALL RIGHTS RESERVED.
GUNNING MACHINES REFRACTORY UNDERGROUND CIVIL
GUNNING MACHINES REFRACTORY UNDERGROUND CIVIL 1 GUNNING MACHINES PROVEN DRY-PROCESS TECHNOLOGY Since the introduction of the first cement gun at the New York Concrete Show in 1910, Putzmeister has been
More informationINDEX OF CONTENT. 1. Celsa Group Presentation. 2. Celsa Huta Ostrowiec Presentation. 3. Forge Division Presentation. - slide 9. - slide 1.
INDEX OF CONTENT 1. Celsa Group Presentation - slide 1 2. Celsa Huta Ostrowiec Presentation - slide 5 3. Presentation - slide 9 www.gcelsa.com 0 CELSA GROUP CORPORATE OVERVIEW CELSA IS THE MOST IMPORTANT
More informationPlasma Heat and Surface Treatment
Plasma Heat and Surface Treatment Plasmait is a supplier of heat and surface treatment solutions based on plasma technology. We design, build, deploy and support production machinery for continuous and
More informationWelding Processes. Consumable Electrode. Non-Consumable Electrode. High Energy Beam. Fusion Welding Processes. SMAW Shielded Metal Arc Welding
Fusion Consumable Electrode SMAW Shielded Metal Arc Welding GMAW Gas Metal Arc Welding SAW Submerged Arc Welding Non-Consumable Electrode GTAW Gas Tungsten Arc Welding PAW Plasma Arc Welding High Energy
More informationSTAINLESS STEEL DELIVERY PROGRAM CONTENTS
DELIVERY PROGRAM CONTENTS INTRODUCTION 1 FLAT BAR 2 PLATE 4 SPECIALTY BLOCKS 5 ROUND BAR 6 SQUARE BAR 8 HEXAGON BAR 8 SHEET 9 ROUND TUBING 10 SQUARE TUBING 10 PIPE 11 HYPODERMIC TUBING 11 ANGLE 12 THREADED
More informationFlame and Plasma Cutting
Metal Services Group is a blended company that provides three primary metal industry services. We offer processing, fabrication and raw material sales. Working with many forms of ferrous and non-ferrous
More informationSECTION VIBRATION ISOLATION
SECTION 15240 VIBRATION ISOLATION PART 1 GENERAL 1.01 SUMMARY A. Related Sections: 1. 15450 - Plumbing Equipment. 2. 15510 - Piping (HVAC). 3. 15515 Valves, Hangers, and Specialties. 4. 15540 - Pumping
More informationSTAINLESS STEEL SHEETS
STAINLESS & NICKEL ALLOY CHATHAM STEEL CORPORATION 59 STAINLESS STEEL SHEETS TYPE 04, 04L, 6, 6L No. 2B Finish Cold Rolled, Annealed *No. 2D Finish No. Finish Polished One Side No. 4 Finish Polished One
More informationMission Statement. State Steel strives to provide quality products and services at competitive
Mission Statement State Steel strives to provide quality products and services at competitive prices. This commitment is demonstrated with several branch locations all offering large, diverse inventories
More informationLab Scale Bicomponent Extruder Fed Spinning Machine Model LBS
HILLSINC 7785 ELLIS RD. WEST MELBOURNE, FL 32904 PH: (321) 724-2370 FAX: (321) 676-7635 E-MAIL: sales@hillsinc.net WEB SITE: WWW.HILLSINC.NET Lab Scale Bicomponent Extruder Fed Spinning Machine Model LBS
More informationFor each ton of molten pig iron, you need: 2600 lbs iron ore or iron ore pellets, 1000 lbs coke 300 lbs of flux (slag, dolomite, limestone, etc).
Steel Mills Steel Process Flow For each ton of molten pig iron, you need: 2600 lbs iron ore or iron ore pellets, 1000 lbs coke 300 lbs of flux (slag, dolomite, limestone, etc). Steel Mill - Raw Materials
More informationIndividual Solutions for the Production of High-Quality Self-Adhesive Film / Foil and Paper. Create intelligent solutions.
Individual Solutions for the Production of High-Quality Self-Adhesive Film / Foil and Paper Create intelligent solutions. Flexible Systems for Highest Demands. You want to know more: www.olbrich.com/adhesivetapes
More informationMAJOR LOT SALE PRISTINE FACILITY! AUCTION CONDUCTED BY:
PUBLIC AUCTION Surplus Assets of a COMMUNICATIONS & ELECTRONICS MANUFACTURING FIRM Wednesday, September 27, 2017 9:30 A.M. EDT MARK YOUR CALENDARS! 400 Phillip Street, Waterloo, ON, N2L 6R7 INSPECTION:
More informationBYERS PRECISION FABRICATORS, INC. Equipment List 2017
Equipment List 2017 5-Axis Laser and Flatbed Laser Cutting - Punching - Milling - Turning - Shearing - Automated Sawing Forming - Welding and Fabrication - ISO 9001:2008 Registered - NQA-1 Compliant 675
More informationOffers would be considered for the whole facility prior to auction, please call: Martin Cottrill or Simon Halsey on + 44 (0)
Online Auction Sale Copper Tube Manufacturing Equipment no longer required by KME Germany GmbH & Co KG Bidding Ends: Wednesday 17th January at 3pm (UK Time) Viewing by Appointment only Offers would be
More informationProduct Booklet Keen K-1000CS FCAW Wire Coil and TIG Filler Wire Storage Oven Floor Positioned
Product Booklet Keen K-1000CS FCAW Wire Coil and TIG Filler Wire Storage Oven Floor Positioned Purpose: To prevent moisture contamination in spooled welding wire and TIG filler rods Capacity: 8 / 10 lb
More informationElectrolytic tinning and chromium plating lines
W7/304E Strip Processing Lines Electrolytic tinning and chromium plating lines Electrolytic tinning and chromium plating lines They have to offer the utmost in productivity, product quality and eco-friendly
More informationSPECIFICATIONS - DETAILED PROVISIONS Section Stainless Steel Sluice Gates C O N T E N T S
SPECIFICATIONS - DETAILED PROVISIONS Section 11294 - Stainless Steel Sluice Gates C O N T E N T S PART 1 - GENERAL... 1 1.01 SUMMARY... 1 1.02 REFERENCES... 1 1.03 DEFINITIONS... 1 1.04 DESIGN REQUIREMENTS...
More informationIt is our intent to always maintain the highest level of quality metals obtainable from our mill sources.
This stock catalog contains the sizes, weights and descriptions of all standard Steel, Brass, Bronze and Dura-Bar Cast Iron items that are available from stock for immediate delivery. However, new items
More informationThe Convenience Stores For Metal
STEEL Data and Specifications 303 Chromium-nickel stainless steel with added sulfur or selenium and phosphorus to improve machinability and non-seizing properties. It is the most free machining of the
More informationThinking big. Acting bold.
Thinking big. Acting bold. About us Established in 1990, Sanghvi Forging is among the country s fastest growing forging players. Our products Tool Steel Forged Flanges Heavy Forgings Machined Forgings
More informationC. Concrete Inertia Bases: Drawings showing required concrete steel reinforcing, construction details, and dimensions.
15240 VIBRATION ISOLATION ************************************************************************************************************* SPECIFIER: CSI MasterFormat 2004 number: 230548 An optional keynote
More informationKnight Group Processing
Helping manufacturers across the globe achieve sustainable leaner manufacturing processes Knight Group Processing Ultrafine Width Tolerances down to +/- 0.025mm (0.001 ) Low Width Thickness Ratio 3:1 unique
More informationStructural Facilities
Structural Facilities Laboratories for the investigation of steel, concrete, masonry and composite materials are in the structural laboratories in CELB Rooms 129, 131, 136, 147 and 149. The facilities
More informationNon-contact temperature measurement from 50 C to 2200 C
high-temperature Applications Non-contact temperature measurement from 50 C to 2200 C Infrared thermometers, infrared cameras and their applications Innovative Infrared Technology High temperature applications
More informationMulti-Purpose Mechanized Welding Carriage
WEL-HANDY MULTI Multi-Purpose Mechanized Welding Carriage Feature & Benefits Two Models Available Standard and Programmable Stitch/Tack Multi Weld Process Standard and Programmable Stitch/Tack Multiple
More informationPrecision feeler gage, calibrated shim steel and Specialty Spring Steels
Precision feeler gage, calibrated shim steel and Specialty Spring Steels 2011 Your partner for precision steels We offer an extensive range of precision feeler gages and shim steel which covers most product
More informationWith Dura-Bar you will be able to:
Dura-Bar Stock List Dura-Bar is an engineered iron designed to meet our customers most critical requirements. It is manufactured to strict process controls that provide world-class quality and uncompromising
More informationCOMPANY PROFILE. HESTEGO a.s. Na Nouzce 470/7, CZ Vyškov phone:
COMPANY PROFILE HESTEGO a.s. Na Nouzce 470/7, CZ 682 01 Vyškov phone: +420 517 321 011 e-mail: hestego@hestego.cz www.hestego.com COMPANY PROFILE TELESCOPIC COVERS Year of founding: 1995 Covering of guide
More informationAlloys SUPER SQUARE
Alloys ETD 150...8-2 ETD 150 Rounds...8-2 AISI 4140/41L40 - Annealed...8-3 AISI 4140 - Annealed Flats And Squares... 8-4 thru 8-5 AISI 4140 - Annealed Rounds... 8-5 thru 8-6 AISI 4140 Rounds HR Q&T...8-7
More information1. Vertical reciprocating conveyor, Hydraulic straddle VRC.
PART 1: GENERAL 1.01 Section Includes: 1. Vertical reciprocating conveyor, Hydraulic straddle VRC. a. Machine, controller, platform, structural steel hoist frame. b. Wire mesh enclosure and gates. Related
More informationSTEEL PRICE FORECASTS TO North America. December MEPS (International) ltd 263 Glossop Road Sheffield S10 2GZ
www.meps.co.uk STEEL PRICE FORECASTS TO 2022 North America December 2017 MEPS (International) ltd 263 Glossop Road Sheffield S10 2GZ t: 0114 275 0570 f: 0114 275 9808 e: subs@meps.co.uk Steel Price s To
More informationGLOBAL ONLINE AUCTION
GLOBAL ONLINE AUCTION Louisville, KY June 10th - 12th, 2014 7:00 am EDT By Order of Diageo, A World Leading Alcoholic Beverage Company Auction of late Model, High End Bottling & Packaging Equipment Public
More informationGLOBAL ONLINE AUCTION
GLOBAL ONLINE AUCTION Louisville, KY June 10th - 12th, 2014 7:00 am EDT By Order of Diageo, A World Leading Alcoholic Beverage Company Auction of late Model, High End Bottling & Packaging Equipment Public
More informationVDM Aluchrom Y Hf Aluchrom Y Hf
VDM Aluchrom Y Hf Aluchrom Y Hf Material Data Sheet No. 4149 September 2017 September 2017 VDM Aluchrome Y Hf 2 VDM Aluchrome Y Hf Aluchrom Y Hf VDM Aluchrom Y Hf is a ferritic chrome steel alloyed with
More informationPinnacle Automation, LLC
Automated Control Systems + So ware Automated Control Systems + So ware Phone: 904.547.2900 3530 Agricultural Center Dr. Fax: 904.547.2902 Suite 207 Email: info@pinnacle-automation.com Saint Augustine,
More informationRoughneck Mesh Slings
Roughneck Slings Roughneck Slings Roughneck WIRE MESH SLINGS Specialty Slings with Particular Properties and Uses Widely used in metalworking shops and steel warehouses where loads are abrasive, hot or
More informationACCUFORM WELDING LTD.
Lot of scale, plate clamp, cabinets and contents (14) sections EZ-Rect shelving DeVair 10hp twin head compressor Bolt bins Hydraulic rams and jacks As at November 22, 2016 1 of 15 2001 CAT 2,350lbs capacity
More informationGeneral Claims Policy
INTRODUCTION This general claims policy covers light flat rolled sheet and tin mill products produced at all ArcelorMittal USA flat rolled facilities. It covers the major points of a claim policy, but
More informationMaterials Carbon Steel and Malleable Iron are used in the manufacture of concrete inserts. Stainless Steel and other materials are available.
Concrete inserts offered in this section are designed to provide a pre-set support point in concrete ceilings, walls, and floors. A range of inserts with varying design loads are available. Materials Carbon
More informationAutomatic measurement and evaluation of flatness of heavy plates for process optimization
ThyssenKrupp Steel Europe Automatic measurement and evaluation of flatness of heavy plates for process optimization Dr. Wolfram Weber, SE R&D Dr. Hans-Jürgen Kaiser, Olaf Ehrich, SE HP Michael Krauhausen,
More informationContents. Introduction. Coating layer : Fine ternary eutectic structure of Zn, Al, and Zn2Mg. 1 Nisshin Steel Quality Products
Introduction Contents 1 2 3 11 12 29 31 Cross-sectional structure of the coating layer Al 34 Zn 34 35 Coating layer Steel sheet Zn2Mg 37 Enlarged photo of eutectic structure Coating layer : Fine ternary
More informationSTOCK LIST COQUITLAM, BC, CANADA SHEET PLATE COIL PIPE TUBE ROD BAR FITTINGS FLANGES EXTRUSIONS ALUMINUM BRASS BRONZE COPPER COPPER-NICKEL
STOCK LIST SHEET PLATE COIL PIPE TUBE ROD BAR FLANGES EXTRUSIONS ALUMINUM BRASS BRONZE COPPER COPPER-NICKEL STAINLESS STEEL COQUITLAM, BC, CANADA S T AINLESS STEEL ALLOYS 303, 304, 304L, 316, 316L, 317L,
More informationCH88 In Situ Flue Gas Oxygen Transmitter
CH88 Combustion Flue Gas Oxygen Analyzer System CMB-PDS-CH88 Product Data Sheet September 2017 CH88 In Situ Flue Gas Oxygen Transmitter World-Class TM performance Outstanding accuracy ±1% full scale 1056
More informationThe TOCA Ductile Iron Foundry in Dingzou
The TOCA Ductile Iron Foundry in Dingzou Foundry entrance and office Foundry buildings Ingot shed (with correct material sign) Documenting the Foundry Process A view of the mold shop is on the right TOCA
More informationPRODUCT CATALOG. TABLE OF CONTENTS 2 Heavy-Wall Seamless & Welded Carbon Steel Pipe. amerpipe.com
PRODUCT CATALOG TABLE OF CONTENTS 2 Heavy-Wall Seamless & Welded Carbon Steel Pipe 4 Alloy Pipe & Tube 6 Chrome-Moly Pipe 7 Low-Temp Pipe 9 Services amerpipe.com 1.800.316.5737 sales@amerpipe.com 825 Maryville
More informationAutomated Machinery & Production Systems
Automated Machinery & Production Systems Success through Commitment In today s business environment, it s imperative that you remain as competitive as possible. Working with a strong partner that you can
More informationA-Series Aluminum Gantry Crane
SPANCO PRODUCT SPECIFICATIONS 1 A-Series Aluminum Gantry Crane This guide can be used to prepare a bid specification for the incorporation of an A-Series Gantry Crane into a competitive bid project or
More informationNUCLEAR. Nuclear Reactor Pressure Vessel Seals
NUCLEAR Nuclear Reactor Pressure Vessel Seals SEALING CONCEPT Technetics Group is the world s leading manufacturer of Nuclear Reactor Pressure Vessel (RPV) Closure Head Seals. In addition, Technetics Group
More informationMuShield s High Permeability Magnetic Shielding per ASTM A753 Alloy Type 4
MuShield s High Permeability Magnetic Shielding per ASTM A753 Alloy Type 4 Available in coil, sheet, rod, billet, wire, and bar form, MuShield s High Permeability Magnetic Shielding is a soft magnetic
More informationInnovations in Secondary Smelting and Recycling Furnace Technology. Chris Emes, Managing Director
Innovations in Secondary Smelting and Recycling Furnace Technology Chris Emes, Managing Director Topics covered today: Benefits of single chamber and double chamber furnaces The automation advantage: improving
More informationALLOYS COMPANY Stephenson Hwy, Madison Heights, MI (248) (800)
Stainless Steel Alloys Gas Metal Arc Welding Gas Tungsten Arc Welding Shielded Metal Arc Welding (GMAW) MIG Wires (GTAW) TIG Alloys (SMAW) Stick Electrode The Royal Line ALLOYS COMPANY 30105 Stephenson
More informationTECHNICAL SPECIFICATION
TECHNICAL SPECIFICATION ABP SERIES OF AUTOMATIC BLISTER PACKAGING MACHINERY Ridat ABP series of machines are some of the most advanced models in the comprehensive range of Ridat blister packaging equipment.
More informationVDM Alloy 80 A Nicrofer 7520 Ti
VDM Alloy 80 A Nicrofer 7520 Ti Material Data Sheet No. 4048 February 2017 February 2017 VDM Alloy 80 A 2 VDM Alloy 80 A Nicrofer 7520 Ti VDM Alloy 80 A is a nickel-chromium alloy that can be age-hardened.
More informationWIDTH & THICKNESS EXTRAS IN INCHES
Effective Date : 1/6/2018 All coils are sold on actual weight basis EXW producing location and listed in hundred weight. Nucor's standard terms and conditions of sale are applicable. All prices are subject
More informationStandard Specification for Seamless and Welded Ferritic and Martensitic Stainless Steel Tubing for General Service 1
Designation: A 268/A 268M 0 An American National Standard Standard Specification for Seamless and Welded Ferritic and Martensitic Stainless Steel Tubing for General Service This standard is issued under
More informationTINPLATE PRODUCTS CNBM CNBM
TINPLATE PRODUCTS Factory Introduction, as one of the largest suppliers in tinplate industry, offers clients prime quality tinplate in both coil and sheet. With multi-plants and fully integrated production,
More informationthe varying quality in existing substrates of older buildings. Be sure to specify the following performance criteria as a minimum.
DUR-O-WAL, INC. BRICK REPLACEMENT ANCHOR GUIDE I General Dur-O-Wal has coupled our new masonry construction experience, with our masonry restoration experience, to create a line of anchors specifically
More informationHigh Performance Plastics for the Chemical Processing Industry
High Performance Plastics for the Chemical Processing Industry 8/2017 Thermoplastics Areas of application Steel pickling Plants Over the last two decades, polypropylenes have become a more common solution
More informationCOMPACT STRIEBIG 4D CONTROL EVOLUTION STANDARD S STANDARD COMPACT. FLEXIBLE AND ECONOMICAL Entry level to vertical sawing technology
WWW.STRIEBIG.COM STRIEBIG 4D CONTROL EVOLUTION STANDARD S STANDARD COMPACT COMPACT FLEXIBLE AND ECONOMICAL Entry level to vertical sawing technology COMPACT / COMPACTAV ENTRY LEVEL TO QUALITY AND PRECISION
More informationSolutions for the Steel Industry. Market Solutions
Solutions for the Steel Industry Market Solutions A Complete Solution BLH Nobel offers both standard and custom made systems and solutions for force, tension and weighing for the steel industry. Our solutions
More informationVulcan, Inc. An Employee Owned Company!
Vulcan, Inc. An Employee Owned Company! A letter from the CEO. Thank you in advance for taking a few minutes to look through this brochure about our company. I sincerely hope it gives you a better total
More informationME 4563 ME 4563 ME Introduction to Manufacturing Processes. College of Engineering Arkansas State University.
Introduction to Manufacturing Processes College of Engineering Arkansas State University 1 Bulk Deformation 2 1 Rolling 3 What is Rolling? A process of reducing the thickness (or changing the cross-section
More informationCoiled Tubing for Downhole Applications
Coiled Tubing for Downhole Applications Tenaris Tubular technologies. Innovative services. Tenaris is the leading global manufacturer and supplier of tubular products and services used in the drilling,
More informationIMPOC. Online measurement of tensile and yield strength. contact-free non-destructive low maintenance
IMPOC Online measurement of tensile and yield strength contact-free non-destructive low maintenance IMPOC Operating principle: EMG IMPOC is a tried and well introduced magnetic inductive testing system
More informationComparison of BS and BS EN for steel materials
Comparison of BS and BS EN for steel materials Appendix This table only highlights the comparison of BS and BS EN on steel materials, which are relevant to plan approval. Title of BS BS BS EN Title of
More informationThickness (T) 0,07 to 3/8 (1,78 to 9,52 mm) 1 3T 4T 2 4T 5T 3 4T 5T 4 5T 6T 5 9T 10T 7 4T 5T 11 3T 4T 12 4T 5T 16 4T 5T 17 3T 4T
TITANIUM FORMING Forming Titanium is readily formed at room temperature, using techniques and equipment suitable for steel. When correct parameters have been established, tolerances similar to those attainable
More information1. Introduction - Daiichi Jitsugyo Inc. (DJK) 2. Introduction - Daiichi Jitsugyo (America) (DJA) 3. Equipment Line-up for Battery Cell Manufacturing
Property of: Daiichi Jitsugyo (America) Inc., 2012 1. Introduction - Daiichi Jitsugyo Inc. (DJK) 2. Introduction - Daiichi Jitsugyo (America) (DJA) 3. Equipment Line-up for Battery Cell Manufacturing 4.
More informationCOPPER CABLES AND CONNECTORS (PTY) LTD.
CopperCables&Connectors(Pty)Ltd, established in 1990, specialises in design and manufacture or repair of Water-Cooled Furnace Cables, Air- Cooled Furnace Cables, Water-Cooled Resistance Welding Cables,
More informationANSI/AWS D An American National Standard. Structural Welding Code Sheet Steel
ANSI/AWS D1.3-98 An American National Standard Structural Welding Code Sheet Steel Key Words Sheet steel, allowable stresses, details of welded joints, workmanship qualification, visual acceptance criteria,
More informationONSITE & ONLINE AUCTION
WWW.MACHINERYNETWORKAUCTIONS.COM PUBLIC AUCTION BY ORDER OF MANAGEMENT COMPLETE PLANT CLOSING AND CONSOLIDATION OF ASSETS TO THE CONTINUING OPERATIONS OF: CONSTAR, INC ONSITE & ONLINE AUCTION FEATURING:
More informationDelivery formats for strip
Delivery formats for strip Delivery formats for strip Wieland strip is available in three different delivery formats, so that you can choose the format that is best suited to your production equipment:
More informationProduct Guide Specification
ALGRIP Manufactured by April 2017 104 North Maple Avenue P.O. Box 646 Leola, Pennsylvania 17540 Toll Free 800-345-8170 Fax 717-656-2041 Website www.algrip.com / www.rosstechnology.com E-mail sales@rosstechnology.com
More informationFabrication of Components. Fabrication of Components. at Dillinger Hütte Heavy Fabrication Division
at Dillinger Hütte Heavy Fabrication Division Jean-Paul BERNARD Sales Divison-Manager jean-paul.bernard@dillinger.biz Rudolf J. Technical Division-Manager rudolf.cawelius@dillinger.biz 1 1 Introduction
More informationTotal Quality Management. Quick and Accurate Response to Inquiries. As-Promised Deliveries. Fair and Competitive Prices
FORGED SHAPES 1 2 MISSION STATEMENT The Anderson Shumaker team is dedicated to earning your loyalty and gaining your trust through: Total Quality Management Quick and Accurate Response to Inquiries As-Promised
More informationBulk Deformation Processes
Bulk Deformation Processes Bachelor of Industrial Technology Management with Honours Semester I Session 2013/2014 TOPIC OUTLINE What is Bulk Deformation? Classification of Bulk Deformation Processes Types
More informationVDM Alloy 36 Pernifer 36
VDM Alloy 36 Pernifer 36 Material Data Sheet No. 7101 April 2018 April 2018 VDM Alloy 36 2 VDM Alloy 36 Pernifer 36 VDM Alloy 36 is a binary iron-nickel alloy with a particularly low heat expansion coefficient,
More informationDANIELI CENTRO ALUMINIUM HOT ROLLING MILL TECHNOLOGY AMAG PROJECT
ANDREA SCORDI SALES MANAGER DANIELI CENTRO ALUMINIUM 4 TH IIAC IRAN INTERNATIONAL ALUMINIUM CONFERENCE OLYMPIC HOTEL TEHRAN, IRAN 11-12 MAY 2016 DANIELI CENTRO ALUMINIUM HOT ROLLING MILL TECHNOLOGY AMAG
More informationStandard Specification for Seamless and Welded Austenitic Stainless Steel Sanitary Tubing 1
Designation: A 270 01 An American National Standard Standard Specification for Seamless and Welded Austenitic Stainless Steel Sanitary Tubing 1 This standard is issued under the fixed designation A 270;
More informationMarinite P structural insulation is
BNZ Materials, Inc. Marinite P Refractory Products Fire-Resistant Structural Insulation Marinite P structural insulation is an incombustible, selfsupporting board that combines high insulating values,
More informationSteel Forgings: Design, Production, Selection, Testing, and Application. Edward G. Nisbett. ASTM Stock No. MNL53
Steel Forgings: Design, Production, Selection, Testing, and Application Edward G. Nisbett ASTM Stock No. MNL53 INTERNATIONAL Standards Worldwide ASTM International 100 Barr Harbor Drive PO Box C700 West
More information. NOTES ON THE TEST OF A BUTT-WELD IN A 24in. x Min. x 1001b. ROLLED STEEL JOIST
BUTT-WELD ROLLED STEEL JOIST. I t 9. NOTES ON THE TEST OF A BUTT-WELD IN A 24in. x Min. x 1001b. ROLLED STEEL JOIST By Mr. H. E. Grove. Practically the whole of the author's welding experience has been
More informationGoulds Two Stage, Horizontally Split Case Pump
Goulds 3316 Two Stage, Horizontally Split Case Pump 3316 Two Stage, Horizontally Split Case Pumps designed for boiler feed, mine dewatering and other applications requiring moderately high heads with a
More informationTechniques for Detection of Surface Defects in Tubing and Pipe
FOERSTER INSTRUMENTS I N C O R P O R A T E D Techniques for Detection of Surface Defects in Tubing and Pipe By: Ronald B Peoples Foerster Instruments Inc. ASNT Level III Certificate # MM-1322 140 INDUSTRY
More informationRolairtrol Air Separator For Hot and Chilled Water Systems
REMOVES ENTRAINED AIR To protect the system against damage To eliminate system noise TANGENTIAL FLOW PATTERN Increases air separation efficiency Allows use of smaller sizes than required with straight
More informationSHILPA RE-ROLLERS PVT. LTD. UNIT 2, BUTIBORI; DIST: NAGPUR
UNIT 2, BUTIBORI; DIST NAGPUR -08 REFERENCE NO A) FABRICATION SHOP CNC Machines A66T ( Ficep) 60x60x9 Cutting/Marking/Punching 2 2 CNC Machines A6T ( Ficep) 60x60x9 Cutting/Marking/Punching 3 CNC Machines
More informationInnovative heat treatment technologies. Field proven reliability and cutting-edge technology for every application
Innovative heat treatment technologies Field proven reliability and cutting-edge technology for every application Leading-edge heat treatment furnaces meeting international safety and quality standards
More informationHigh Yield Rip Systems
High Yield Rip Systems 130 Salt Point Turnpike Poughkeepsie, NY 12603 Tel: 800.952.1320 Fax: 845.452.0764 www.cameronautomation.com Skew: up to 7,000 board feet per shift Cameron Automation has pushed
More informationCONTENTS CORPORATE GUIDING PRINCIPLES CERTIFICATOINS AND LICENCES HOT ROLLED PIPE MANUFACTURING COLD ROLLED PIPE MANUFACTURING TESTING
ROHRWERK MAXHÜTTE CONTENTS CORPORATE GUIDING PRINCIPLES p. 4 QUALITY CERTIFICATOINS AND LICENCES p. 5 PRODUCTION PROCESSES HOT ROLLED PIPE MANUFACTURING COLD ROLLED PIPE MANUFACTURING TESTING HEAT TREATMENT
More informationInterior Hangers. Application
Application Interior bridge deck hangers are typically fabricated using two heavy duty sheet metal end clips that have been electrically resistance welded to an appropriate sized wire or formed metal connecting
More informationFABRICATION OF HEAVY WALL Cr-Mo / Cr-Mo-V REACTORS CHALLENGES AND TECHNOLOGY UPGRADATION AT LARSEN & TOUBRO LIMITED INDIA
FABRICATION OF HEAVY WALL Cr-Mo / Cr-Mo-V REACTORS CHALLENGES AND TECHNOLOGY UPGRADATION AT LARSEN & TOUBRO LIMITED INDIA Pallav Chattopadhyay, B K Rai & Y S Trivedi Larsen & Toubro Limited India Abstract:
More information2
1 2 3 4 5 6 7 Direct -Straightforward steady forward force by hydraulic ram Indirect -Has the advantage that there is no friction between billet and chamber (no movement) -Note dummy block at face of ram
More informationELECTRICAL RESISTIVITY AS A FUNCTION OF TEMPERATURE
ELECTRICAL RESISTIVITY AS A FUNCTION OF TEMPERATURE Introduction The ability of materials to conduct electric charge gives us the means to invent an amazing array of electrical and electronic devices,
More informationSigmaJoint. The Ultimate Joint J. Armouring & Load Transfer Systems. Metallic Leave-In-Place Contraction & Day Joints for INDUSTRIAL CONCRETE FLOORS
SigmaJoint Metallic Leave-In-Place Contraction & Day Joints for INDUSTRIAL CONCRETE FLOORS TYPE - D TYPE - O The Ultimate Joint J Armouring & Load Transfer Systems SigmaJoint Introduction Joints are unavoidable
More informationCatalogue Since 1962 WELDING AUTOMATION
Catalogue 2015 Since 1962 CONTENT Welding automation: PKTBA-US-1...PKTBA-US-4 4 PKTBA-USF-1800-2500-12000-KPNV 6 PKTBA-UN-1...PKTBA-UN-3 7 PKTBA-UN-6PM 8 PKTBA-UNG-750-400-400-KNV-А 9 Welding mechanization:
More informationLocation. Distance from : Registered Office and Works
Company Profile Location Registered Office and Works Plot No. D4-D4/1, Five Star Industrial Estate, Kagal, Kolhapur- 416236 India Tel: +91 231 2685 300 Fax +91 231 2685 333 email: info@utpindia.com www.utpindia.com
More informationHORNOS Y METALES S.A
HORNOS Y METALES S.A THE COMPANY I COMPANY HORNOS Y METALES S.A. FOUNDED 1988 BY MR. ANGEL AGUIRRE PASTO TURNOVER 8 MILLON EUROS IN 2011 30% SALES INCREASE SINCE 2009 MAJOR COMPLETED PROJECT 1,550.000
More informationAutomatic Coiling Technology
Automatic Coiling Technology Pipe Coil Technology Limited specialise in automatic coiling systems for use with a wide range of plastic pipe, tube, hose and conduit. In all applications the replacement
More informationFig. 1 - Standard Clevis Hanger
Revision 10/24/2007 Fig. 1 - Standard Clevis Hanger Component of State of California OSHPD Approved Seismic Restraints System Size Range Size 1/2" thru 36" pipe. Function Recommended for the suspension
More informationNew Developments in Rolltex and Rollscan
New Developments in Rolltex and Rollscan Manos Skalidakis Sales Engineer October 2015 Overview Sarclad Limited Rolltex EDT range Rolltex Eco EDT Rolltex EDC a new development project to replace chrome
More information