JAEGER TOWER PACKINGS TRAYS COLUMN INTERNALS. Plastic Jaeger Rings & Saddles Product Bulletin 700

Transcription

1 TOWER PACKINGS TRAYS COLUMN INTERNALS Plastic Jaeger Rings & Saddles Product Bulletin 700 Superior performance by design TM PRODUCTS, inc.

2 TABLE OF CONTENTS Introduction 1 Physical Properties Rings 2 Mass Transfer Efficiency Comparison 3 Pressure Drop Curves - Rings 4-8 Physical Properties Saddles 9 Mass Transfer Efficiency Comparison 10 Pressure Drop Curves - Saddles Other Jaeger Packings 14 Jaeger Rings & Jaeger Saddles Jaeger Rings and Saddles are conventionally shaped packings that offer a good performance at an economical price when compared to similar packing. They represent the oldest, and perhaps most common, type of plastic packings used over the past 40 years. Plastic Jaeger Rings and Plastic Jaeger Saddles give comparable hydraulic and mass transfer performance to ring and saddles supplied by other manufacturers. Plastic Jaeger Rings are equivalent to the Flexiring and the Ballast TM Ring. Plastic Jaeger saddles are equivalent to the Super Intalox Saddle, the Flexisaddle TM, and the Ballast Saddle TM.

3 Page 2 Plastic Jaeger Rings Specifications & Physical Properties Materials Twelve standard, injection moldable plastics are available: Polypropylene (PP) TopEx (LCP) Polyethylene (PE) Kynar (PVDF) Polypropylene Halar (ECTFE) Glass-Filled (PPG) Teflon (PFA) Noryl (PPO) Tefzel (ETFE) Polyvinylchloride (PVC) Tefzel Glass- Corzan TM (CPVC) Filled (ETFE-G) Other plastics are available on request. IMPORTANT NOTE: Design data presented in this bulletin are for preliminary calculations only. Contact Jaeger before finalizing design. Properties Table Size (in.) e Geometric Surface Area (ft 2 /ft 3 ) Packing Factor (1/ft) Void Space (%) Bulk Density (lb/ft 3 ) (PP) Applications Scrubbing and absorption for odor control Stripping and degassing for water treatment Particulate removal from gases Aeration, ozonation, and mixing Biological treatment Cooling tower Mist elimination Other heat and mass transfer applications Packaging 5 and 10 ft 3 corrugated cardboard cartons constitute standard packaging. Other packaging, including bulk containers or bags, is available on request. Because of the small size of standard packaging and associated wall effects and settling, Jaeger recommends that packaged volumes of 10% in excess of the bed volume be ordered to ensure full beds upon installation.

4 Page 3 Mass Transfer Efficiency Comparison Plastic Jaeger Rings

5 Page 4 Pressure Drop vs C-Factor 5/8 Plastic Jaeger Rings Ambient Air/Water (70 o F, 1 atm) at 20 gpm/ft 2

6 Page 5 Pressure Drop vs. C-Factor 1 Plastic Jaeger Rings Ambient Air-Water Systems for Various Liquid Loadings For Air/Water systems at 70 o F & 1 atm: C-Factor x = lb/hr-ft 2 ; gpm/ft 2 x = lb/hr-ft 2

7 Page 6 Pressure Drop vs. C-Factor 1.5 Plastic Jaeger Rings Ambient Air-Water Systems for Various Liquid Loadings For Air/Water systems at 70 o F & 1 atm: C-Factor x = lb/hr-ft 2 ; gpm/ft 2 x = lb/hr-ft 2

8 Page 7 Pressure Drop vs. C-Factor 2 Plastic Jaeger Rings Ambient Air-Water Systems for Various Liquid Loadings For Air/Water systems at 70 o F & 1 atm: C-Factor x = lb/hr-ft 2 ; gpm/ft 2 x = lb/hr-ft 2

9 Page 8 Pressure Drop vs. C-Factor 3.5 Plastic Jaeger Rings Ambient Air-Water Systems for Various Liquid Loadings For Air/Water systems at 70 o F & 1 atm: C-Factor x = lb/hr-ft 2 ; gpm/ft 2 x = lb/hr-ft 2

10 Page 9 Plastic Jaeger Saddles Specifications & Physical Properties Materials Twelve standard, injection moldable plastics are available: Polypropylene (PP) TopEx (LCP) Polyethylene (PE) Kynar (PVDF) Polypropylene Halar (ECTFE) Glass-Filled (PPG) Teflon (PFA) Noryl (PPO) Tefzel (ETFE) Polyvinylchloride (PVC) Tefzel Glass- Corzan TM (CPVC) Filled (ETFE-G) Other plastics are available on request. IMPORTANT NOTE: Design data presented in this bulletin are for preliminary calculations only. Contact Jaeger before finalizing designs. Properties Table Size (in.) Geometric Surface Area (ft 2 /ft 3 ) Packing Factor (1/ft) Void Space (%) Bulk Density (lb/ft 3 ) (PP) Applications Scrubbing and absorption for odor control Stripping and degassing for water treatment Particulate removal from gases Aeration, ozonation, and mixing Biological treatment Cooling tower Mist elimination Other heat and mass transfer applications Packaging 5 and 10 ft 3 corrugated cardboard cartons constitute standard packaging. Other packaging, including bulk containers or bags, is available on request. Because of the small size of standard packaging and associated wall effects and settling, Jaeger recommends that packaged volumes of 10% in excess of the bed volume be ordered to ensure full beds upon installation.

11 Page 10 Mass Transfer Efficiency Comparison Plastic Jaeger Saddles For Air/Water systems at 70 o F & 1 atm: C-Factor x = lb/hr-ft 2 ; gpm/ft 2 x = lb/hr-ft 2

12 Page 11 Pressure Drop vs C-Factor 1 Plastic Jaeger Saddles For Air/Water systems at 70 o F & 1 atm: C-Factor x = lb/hr-ft 2 ; gpm/ft 2 x = lb/hr-ft 2

13 Page 12 Pressure Drop vs C-Factor 2 Plastic Jaeger Saddles For Air/Water systems at 70 o F & 1 atm: C-Factor x = lb/hr-ft 2 ; gpm/ft 2 x = lb/hr-ft 2

14 Page 13 Pressure Drop vs C-Factor 3 Plastic Jaeger Saddles For Air/Water systems at 70 o F & 1 atm: C-Factor x = lb/hr-ft 2 ; gpm/ft 2 x = lb/hr-ft 2

15 PHYSICAL PROPERTIES OF PACKINGS Type Size (nominal) Packing Factor (1/ft) Weight (lb/ft 3 ) Surface Area (ft 2 /ft 3 ) Void Space (%) Plastic Packing Jaeger Tri-Packs 1'' 1 1/4'' 2'' 3 1/2'' Cascade Mini-Rings 1'' 2'' 3 1/2 '' Jaeger Rings Jaeger Saddles 5/8'' 1'' 1 1/2 '' 2'' 3 1/2 '' 1'' 2'' 3'' Bio-Ring Cascade Bio-Ring 3 1/2 '' 7 NA NA Metal Random Packing VSP 25 mm 40 mm 50 mm Top-Pak 75 mm Interpack 10 mm 15 mm 20 mm Metal Structured Packing Max-Pak 1/2 '' Ceramic Packing Novalox Saddles 1/2 '' 3/4 '' 1'' 1 1/2 '' 2'' 3'' weights of plastic based on polypropylene weights of metal based on 300 series stainless steel all weights are dry weights

16 For More Information: General Brochure Series 100 Metal VSP & Metal Top-Pak Series 200 Metal Random Packing Series 300 -Future Publication CoFlo TM Trays Series 400 Fractionation Trays Series 450 -Future Publication Metal Max-Pak TM Series 500 Plastic Jaeger Tri-Packs Series 600 Plastic Rings & Saddles Series Complete Technical Catolog includes all of the above along with other technical and performance information. NOTE: The information presented in this brochure is believed to be accurate and reliable. However, it is based on test results which may not apply to your application. Therefore, the data is presented without guarantee or warranty. We recommend that you contact Jaeger s engineering department or your local representative to discuss the details of your specific application. TRI-PACKS is a Trademark of PRODUCTS, INC., U.S. Patent No. 4,203,935. Canadian Patent No. 1,150,621. Tri-Packs have the Trademark HACKETTEN in Germany. Further Patents Pending. PRODUCTS, INC. is a member of Fractionation Research, Inc. and Water Environment Federation. VSP, TOP-PAK, Novalox are trademarks of VFF, Germany. Other Trademarks herein: Corzan TM Noryl Kynar Halar Tefzel Teflon Intalox Pall Raschig Tellerette Hiflow Rings Lanpac NSF B.F. Goodrich General Electric Company Elf Atochem North America, Inc. Ausimont USA, Inc. E.I. DuPont de Nemours & Co., Inc. E.I. DuPont de Nemours & Co., Inc. Norton Chemical Process Products Norton Chemical Process Products Raschig AG Ceilcote-Air Pollution Control Rauschert Industries, Inc. Lantec Products, Inc. NSF International Plastic Cascade Mini-Rings Series 800 Biological Products/Chemicals Series 900 -Future Publication Ceramic Packing Series 1000 Column Internals Series 1100 Manufactured and M arketed by: Jaeger Products, Inc Peachleaf Street Houston, TX Phone: Fax: Represented by: Superior performance by design TM PRODUCTS, inc