Table of Contents Who We Are 01. Casing Heads 02. Casing Spools 03. Tubing Spools 04. Threaded Tubing Heads 05. Multibowl Wellhead System 06

Size: px

Start display at page:

Download "Table of Contents Who We Are 01. Casing Heads 02. Casing Spools 03. Tubing Spools 04. Threaded Tubing Heads 05. Multibowl Wellhead System 06"

Prudence Bridges
5 years ago
Views:

2 Table of Contents Who We Are 01 Casing Heads 02 Casing Spools 03 Tubing Spools 04 Threaded Tubing Heads 05 Multibowl Wellhead System 06 Bottom Hole Test Adapters 07 Tubing Head Adapters 08 Secondary Seals 09 Casing Hangers 10 Tubing Hangers 11 Studded Crosses and Tees 12 Gate Valves 13 Slab Gate Valves 14 Expanding Gate Valves 15 Consumables 16

Who we are Apache Pressure Products is a leading distributor of oilfield and industrial equipment.

Our sales specialists will assist you on your purchase whether you are looking for just one gate valve or an entire multi-bowl system with custom design elements and modifications.

We also conduct an annual quality inspection of each supplier to ensure that the level of quality is maintained.

3 Who we are Apache Pressure Products is a leading distributor of oilfield and industrial equipment. Our line of API 6A wellhead equipment is made to the highest quality standards and has been field tested time and time again. Our sales specialists will assist you on your purchase whether you are looking for just one gate valve or an entire multi-bowl system with custom design elements and modifications. Apache Pressure Products utilizes a network of qualified manufacturers, all whom must complete a quality audit process with satisfactory rating to be considered. We also conduct an annual quality inspection of each supplier to ensure that the level of quality is maintained. We leverage two decades worth of contracting manufacturing experience in the selection and qualification of our vendors. Our onsite representatives are on call and ready at any given time to inspect and monitor manufacturing and testing of our products. When the products arrive in the US they are further scrutinized for material and workmanship defects at our quality control center. We ensure that every piece of equipment meets and surpasses all specification requirements. At our Manvel warehouse we keep an extensive stock of wellhead equipment as well as vast selections of valves and fittings for all of your drilling and production needs. Please give us a call today and see what we can offer you. Our mission is to provide unsurpassed value to our customers through constant improvement and innovation. 1

C-22/29 Casing Heads Apache Casing heads have a straight bore bowl design with 45 landing shoulders which prevents damage to

Ordering Options Outlets Line Pipe Outlets Side Studded Outlets Lock Screws BP pins (2) are supplied upon request Bottom

Casing Size Top Flange Working Pressure (psi) A B C Weight (lbs) 2,000 17.25 8.00 10.88 340 8-5/8" 11" 3,000 17.25 8.00 10.88 460 5,000 17.

00 10.88 300 10-3/4" 11" 3,000 17.25 10.00 10.88 410 5,000 17.50 10.00 10.88 560 2,000 17.50 11.00 13.50 469 3,000 17.50 11.00 13.50 587 11-3/4" 5,000 17.

50 12.56 13.50 750 16-3/4" 3,000 17.50 12.56 16.62-5,000 18.00 12.56 16.62-2,000 17.50 15.37 16.62 980 16" 16-3/4" 3,000 17.

4 C-22/29 Casing Heads Apache Casing heads have a straight bore bowl design with 45 landing shoulders which prevents damage to sealing areas by drilling tools and eliminates bowl protector wedging issues when pressure is applied. Ordering Options Outlets Line Pipe Outlets Side Studded Outlets Lock Screws BP pins (2) are supplied upon request Bottom Connections Slip-on-weld Slip-on-weld + O ring Threaded Sure Lock API 6A specifications PSL 1, PSL 2 (on request), PR 1, DD Casing Size Top Flange Working Pressure (psi) A B C Weight (lbs) 2, /8" 11" 3, , , /8" 11" 3, , , /4" 11" 3, , , , /4" 5, /4" 3, , , , /8" 5, /4" 3, , , " 16-3/4" 3, , " 21-1/4" 2, /4" 3,

Casing Spool Apache C-22 Casing Spools have a straight bore bowl design with 45 landing shoulders. Bottom prep can be standard PE/BG, OO bottom (below 5,000 psi applications) or double P seal bottom.

Bottom Flange (wp in psi) Top Flange (wp in psi) Dimensions (inch) A B C Weight (lbs) 2,000 11" 2,000 23.12 10.00 10.88 570 3,000 23.12 10.00 10.88 600 11" 3,000 11" 3,000 23.12 10.00 10.88 710 5,000 26.

25 10.00 10.88 1175 3,000 3,000 26.75 12.50 13.50-5,000 26.75 12.50 13.50-5,000 10,000 2,000 11" 11" 11" 10,000 5,000 2,000 29.38 23.12 10.00 10.00 10.88 10.88 1595-10,000 3,000 30.25 23.12 10.00 10.00 10.88 10.88 1948-30.

12 10.00 10.88 1518 3,000 3,000 24.12 12.50 13.50 1725 16-3/4" 5,000 25.00 12.50 13.50 1950 5,000 11" 5,000 30.50 10.00 10.88-10,000 29.75 10.00 10.88 3235 5,000 29.75 12.50 13.50-10,000 30.50 12.

00 12.50 13.50 2450.00 20-3/4" 3,000 20-3/4" 3,000 27.00 19.12 20.12-21-1/4" 5,000 29.25 19.12 20.12-21-1/4" 5,000 5,000 27.00 12.50 13.50-10,000 29.25 12.50 13.50-16-3/4" 5,000 30.75 15.37 16.

5 Casing Spool Apache C-22 Casing Spools have a straight bore bowl design with 45 landing shoulders. Bottom prep can be standard PE/BG, OO bottom (below 5,000 psi applications) or double P seal bottom. C-29 Casing Spools are based on the same design as the C-22 with a larger bowl. Which permits the acceptance of the C-29 Casing Hanger with larger load capacity. Bottom Flange (wp in psi) Top Flange (wp in psi) Dimensions (inch) A B C Weight (lbs) 2,000 11" 2, , " 3,000 11" 3, , ,000 11" 5, , ,000 11" 2, , , , , " 5, ,000 3, , ,000 10,000 2,000 11" 11" 11" 10,000 5,000 2, ,000 3, ,000 5,000 2, ,000 3, , " 5, ,000 3, /4" 5, ,000 11" 5, , , , ,000 10, /4" 10, /4" 2,000 2, , /4" 2, , , , /4" 3, /4" 3, /4" 5, /4" 5,000 5, , /4" 5, , Ordering Options Outlets Line Pipe Outlets Side Studded Outlets Lock Screws BP pins (2) are supplied upon request Bottom Prep PE/BG Bottom OO Bottom Dobule P Seal Bottom API 6A specifications PSL 1, PSL 2, PR 1, DD 3

Tubing Spools Apache Tubing Spools have a straight bore bowl design with 45 landing shoulders which prevents damage to sealing areas by drilling tools and eliminates bowl protector wedging

Dimensions (inch) Weight Bottom Flange (wp in psi) Top Flange (wp in psi) A B C (lbs) 2,000 7-1/16 3,000 23.12 6.76 7.00 550 3,000 23.12 6.76 7.00 600 7-1/16 5,000 26.25 6.76 7.00 670 3,000 3,000 26.

25 6.76 7.00-9 10,000 32.62 8.25 8.75 1700 7-1/16 3,000 23.12 6.76 7.00 445 2,000 9 3,000 23.12 8.25 8.75 655 3,000 26.25 6.76 7.00 670 7-1/16 5,000 26.25 6.76 7.00 805 3,000 3,000 26.25 8.25 8.75 705 9 5,000 26.

6 Tubing Spools Apache Tubing Spools have a straight bore bowl design with 45 landing shoulders which prevents damage to sealing areas by drilling tools and eliminates bowl protector wedging issues when pressure is applied. Accepts all TC style tubing hangers, can be converted from single to multiple completions. Dimensions (inch) Weight Bottom Flange (wp in psi) Top Flange (wp in psi) A B C (lbs) 2, /16 3, , /16 5, ,000 3, , " 5, /16 5,000 10, , , /16 10,000 15, , /16 3, , , , /16 5, ,000 3, , , , Ordering Options Outlets Line Pipe Outlets Side Studded Outlets Bottom Prep PE/BG bottom HPE bottom Lock Screws BP pins are included API 6A specifications PSL 1 or PSL 2, PR 1, DD-NL 4

Threaded Tubing Heads Apache Threaded Tubing Heads

All Tubing Heads are supplied with 4 BP Lock pins

Tubing Heads are supplied up to 5,000 psi.

Dimensions (inches) A B C Wt (lbs) 3,000 4 1/2" 8rd

000 7.126 103 7 1/16" 3,000 5 1/2" 8rd 000 7.

7 Threaded Tubing Heads Apache Threaded Tubing Heads has a TCM top and threaded bottom connection. All Tubing Heads are supplied with 4 BP Lock pins and comes with 2 LP outlets. Tubing Heads are supplied up to 5,000 psi. Flange (w orking pressure in psi) Bottom Outlet Dimensions (inches) A B C Wt (lbs) 3, /2" 8rd 2 X 2" LP /16" 3, /2" 8rd 2 X 2" LP , /2" 8rd 2 X 2" LP , /2" 8rd 2 X 2" LP

Multibowl Wellhead System The multi-bowl system allows the support of multiple casing strings therefore reducing installation time.

Apache's multi-bowl system can significantly reduce your operational cost and improve safety at the same time.

Lockdown pins from the upper casing spool locks the tubing hangers in place. Casing Spool Straightbore design casing spool incorporates two sets of ET style lockpins.

8 Multibowl Wellhead System The multi-bowl system allows the support of multiple casing strings therefore reducing installation time. Our multi-bowl wellhead system is configurable according to your specifications. Apache's multi-bowl system can significantly reduce your operational cost and improve safety at the same time. Tubing Hanger Mulit-bowl system uses traditional TCM Tubing Hangers. Tubing hanger lands on the packoff support bushing. Lockdown pins from the upper casing spool locks the tubing hangers in place. Casing Spool Straightbore design casing spool incorporates two sets of ET style lockpins. Supplied with two Side-Studded Outlets Packoff Support Bushing Pack-off support busing lands on the mandrel hanger and suspend the intermediate casing string. Casing Hanger Multi-bowl system utilizes a fluted mandrel casing hanger to allow cement returns. Casing Head Apache Multi-bowl casing head uses a o straight-bore desgin with 45 landing shoulders. Casing heads are supplied with eight lockpins to support the packoff bushing. 6

Bottom Hole Test Adapters Bottom hole test

forging and is designed to use where a integral

Flange Size Bore A B C Lift Thread Wt (lbs)

9 Bottom Hole Test Adapters Bottom hole test adapters or Treecaps allow a flexible means of entry into the tubing bore. Apache tree caps are constructed with one piece forging and is designed to use where a integral flanged unit is preferred. Flange Size Bore A B C Lift Thread Wt (lbs) 2-1/16" 5,000 psi 2 1/16" 7.79" 8.46" 2.07" 2 3/8" EUE /16" 5,000 psi 2 9/16" 7.79" 9.65" 2.56" 2 7/8" EUE 60 7

Tubing Head Adapters Apache Pressure Products offers a wide selection of tubing head adapters for transition from the wellhead to the

B1 Theaded Adapters Flanged adapter with male externally threaded top connection and female bottom internally threaded both with 8rd

(lbs) 7-1/16" 2,000 2-3/8" UPTBG 2-3/8" UPTBG 117 7-1/16" 2,000 2-7/8" UPTBG 2-7/8" UPTBG 110 7-1/16" 3,000 2-3/8" UPTBG 2-3/8" UPTBG

7-1/16" 5,000 2-7/8" UPTBG 2-7/8" UPTBG 195 7-1/16" 5,000 3-1/2" UPTBG 3-1/2" UPTBG 175 B2P Adapters Flanged adapter with studded top

(lbs) 7-1/16" 2,000 2-1/16" 2,000 2-3/8" UPTBG 107 7-1/16" 3,000 2-1/16" 5,000 2-3/8" UPTBG 114 7-1/16" 3,000 2-9/16" 5,000 2-7/8"

UPTBG 230 7-1/16" 5,000 3-1/8" 5,000 3-1/2" UPTBG 330 A5P Adapters Flanged adapter with studded top and bottom pocket of 2 or 2.5. Available with 1/2 NPT test port.

10 Tubing Head Adapters Apache Pressure Products offers a wide selection of tubing head adapters for transition from the wellhead to the tree. Adapters are designed for mulitiple types of heads and hangers. Comes in threaded, flanged or studded connections. B1 Theaded Adapters Flanged adapter with male externally threaded top connection and female bottom internally threaded both with 8rd EUE threads. Flange Size Threaded Top Bottom Thread Wt. (lbs) 7-1/16" 2, /8" UPTBG 2-3/8" UPTBG /16" 2, /8" UPTBG 2-7/8" UPTBG /16" 3, /8" UPTBG 2-3/8" UPTBG /16" 3, /8" UPTBG 2-7/8" UPTBG /16" 3, /2" UPTBG 3-1/2" UPTBG /16" 5, /8" UPTBG 2-3/8" UPTBG /16" 5, /8" UPTBG 2-7/8" UPTBG /16" 5, /2" UPTBG 3-1/2" UPTBG 175 B2P Adapters Flanged adapter with studded top and 8rd EUE threaded bottoms. Flange Size Studded Top Bottom Thread Wt. (lbs) 7-1/16" 2, /16" 2, /8" UPTBG /16" 3, /16" 5, /8" UPTBG /16" 3, /16" 5, /8" UPTBG /16" 3, /8" 5, /2" UPTBG /16" 5, /16" 5, /8" UPTBG /16" 5, /16" 5, /8" UPTBG /16" 5, /8" 5, /2" UPTBG 330 A5P Adapters Flanged adapter with studded top and bottom pocket of 2 or 2.5. Available with 1/2 NPT test port. Flange Size Studded Top Bottom Pocket Wt. (lbs) 7-1/16" 3, /16" 5,000 2" /16" 3, /16" 5, /2" /16" 5, /16" 5,000 2" /16" 5, /16" 5, /2" /16" 10, /16" 10,000 2" /16" 10, /16" 10, /2" 316 8

Secondary Seals Secondary seals are inserted in the bottom of a casing or tubing spool.

Apache Pressure Products carries PE and HPE secondary seals.

wire. The seal is energized when the spool is installed over the casing stub and the flanged

HPE Seals HPE seal is inserted into a HPE bottom preparation of most 10,000-15,000 psi casing or

The bottom plate is threaded into the bottom prep and is designed for high pressure applications

11 Secondary Seals Secondary seals are inserted in the bottom of a casing or tubing spool. It is used to seal around the production casing. Apache Pressure Products carries PE and HPE secondary seals. PE Seals PE seal is inserted in the bottom of a casing or tubing spool and retained with a snap wire. The seal is energized when the spool is installed over the casing stub and the flanged connection is made up. HPE Seals HPE seal is inserted into a HPE bottom preparation of most 10,000-15,000 psi casing or tubing spools. The bottom plate is threaded into the bottom prep and is designed for high pressure applications Casing Size Spool Nominal Bottom Prep 7" 9" 10-3/4" 4-1/2" 5,000 psi - 15,000 psi 5,000 psi - 15,000 psi 5" 5,000 psi - 15,000 psi 5,000 psi - 15,000 psi 5-1/2" 5,000 psi - 15,000 psi 5,000 psi - 15,000 psi 6-5/8" 5,000 psi - 15,000 psi 7" 5,000 psi - 15,000 psi 7-5/8" 5,000 psi - 15,000 psi 8-5/8" 5,000 psi - 15,000 psi 9-5/8" 5,000 psi - 15,000 psi 9

Casing Hangers Apache Pressure Products offers a wide selection of

The casing Hanger lands inside of the casing head and is

We supply both slip and mandrel style casing hangers.

12 Casing Hangers Apache Pressure Products offers a wide selection of Casing Hangers. The casing Hanger lands inside of the casing head and is responsible for hanging the casing string. We supply both slip and mandrel style casing hangers. C-22/29 Apache C-22 wrap around casing hangers incorporates pack off, slip bowl and slips. Packoff seals the annulus below the slips when casing load is applied. The C-22 Hanger s controlled fricition reduces casing deflection. C-22 casing hangers are easy to install and economical. Nominal Bowl Size 11" 16-3/4" 20" Casing Size 4-1/2" 5" 5-1/2" 7" 7-5/8" 5-1/2" 7" 7-5/8" 8-5/8" 9-5/8" 9-5/8" 10-3/4" 11-7/8" 13-3/8" 16" 10

Apache Pressure Products offers a wide selection of tubing hangers. Tubing hangers suspends the production tubing and provide seal off of the casing annulus.

without the BOP. Size Wt (lbs) 7 1/16" X 2 3/8" O.D. 70 7 1/16" X 2 7/8" O.D. 70 TC1A Tubing Hanger TC1A is a threaded tubing hanger.

13 Apache Pressure Products offers a wide selection of tubing hangers. Tubing hangers suspends the production tubing and provide seal off of the casing annulus. TC1W Tubing Hanger TC1W Wrap around hanger is designed to seal off the casing annulus at the same time supporting the tubing string and nippling up the christmas tree without the BOP. Size Wt (lbs) 7 1/16" X 2 3/8" O.D /16" X 2 7/8" O.D. 70 TC1A Tubing Hanger TC1A is a threaded tubing hanger. The hanger is energized by the weight of the tubing and tightening the lock screws in the tubing head flange. Size Wt (lbs) 7 1/16" X 2 3/8" O.D /16" X 2 7/8" O.D. 68 TC1A-EN Tubing Hanger TC1A-EN is an extended neck TC1A hanger with packing rings that confine all of the well pressure and fluids to the tubing bore. TC1A-EN hangers can be modified to include connections and ports for the hydraulic ontrol line in the event of hydraulically controlled down-hole safety valve installation. Size Wt (lbs) 7 1/16" X 2 3/8" O.D /16" X 2 7/8" O.D

Studded Crosses and Tees Apache Pressure Products offers a wide selection of crosses and tees in different sizes and pressures. Run Outlets Dimensions Wt.

56 125 119 2-9/16"5,000 2-1/16"5,000 4.50 5.00 2.56 2.06 375 255 2-9/16"5,000 2-9/16"5,000 5.00 5.00 2.56 2.56 350 225 3-1/8"2,000 3-1/8"2,000 4.50 4.50 3.12 3.12 198 185 3-1/8"3,000 2-1/16"5,000 4.

50 5.50 3.12 2.56 364 310 3-1/8"5,000 3-1/8"5,000 5.50 5.50 3.12 3.12 414 321 4-1/16"2,000 4-1/16"2,000 5.50 5.50 4.06 4.06 405 354 4-1/16"3,000 3-1/8"3,000 5.00 6.12 4.06 3.

50 6.50 4.06 2.56 565 486 1-13/16"10,000 1-13/16"10,000 4.38 4.38 1.81 1.81 191 187 1-13/16"15,000 1-13/16"15,000 5.00 5.00 1.81 1.81 257 253 2-1/16"10,000 1-13/16"10,000 4.38 4.38 2.06 1.

14 Studded Crosses and Tees Apache Pressure Products offers a wide selection of crosses and tees in different sizes and pressures. Run Outlets Dimensions Wt. (lbs) A, inch B, inch C, inch D, inch TEE Cross 2-1/16"2, /16"2, /16"5, /16"5, /16"2, /16"2, /16"5, /16"5, /16"5, /16"5, /8"2, /8"2, /8"3, /16"5, /8"3, /16"5, /8"3, /8"3, /8"5, /16"5, /8"5, /16"5, /8"5, /8"5, /16"2, /16"2, /16"3, /8"3, /16"3, /16"3, /16"5, /16"5, /16"5, /8"5, /16"5, /16"5, /16"10, /16"10, /16"15, /16"15, /16"10, /16"10, /16"10, /16"10, /16"15, /16"15, /16"15, /16"10, /16"10, /16"10, /16"10, /16"15, /16"10, /16"10, /16"15, /16"15, /16"15, /16"15, /16"15, /16"15, /16"10, /16"10, /16"10, /16"10, /16"10, /16"10, /16"10, /16"10, /16"15, /16"15, /16"15, /16"15, /16"15, /16"15, /16"15, /16"15,

15 Gate Valves Material specification for API 6A Service Condition Body Description Body Bonnet Stem Gate Seat Stem Seal Seat Seal Bonnet Seal API CLASS AA General Non-corrosive Forging or casting Forging Alloy Alloy Alloy Viton 304or 316SS API CLASS BB General Slightly Corrosive Forging or casting Forging A564 Type. 630 (17-4PH) Viton 304or 316SS API CLASS CC General Moderately Corrosive, CO2 410 Stainless Steel 410 Stainless Steel A564 Type. 630 (17-4PH) Viton 304or 316SS API CLASS DD-NL Sour Non-corrosive Forging or casting Forging Alloy Alloy Alloy Viton 304or 316SS API CLASS EE-0,5 Sour Slightly Corrosive Forging or casting Forging A564 Type. 630 (17-4PH) Viton 304or 316SS API CLASS EE-1,5 Sour Moderately Corrosive CO2 Forging or casting Forging Inconel 718 w/hard facing Viton 304or 316SS API CLASS EE-NL Sour Moderately Corrosive CO2 Forging or casting Forging Inconel 718 w/hard facing Viton 304or 316SS API CLASS FF-0,5 Sour, Moderately Corrosive, H2S 410 Stainless Steel 410 Stainless Steel A564 Type. 630 (17-4PH) Viton 304or 316SS API CLASS FF-1,5 Sour Highly Corrosive H2S and CO2 410 Stainless Steel 410 Stainless Steel Inconel 718 w/hard facing Viton 304or 316SS API CLASS FF-NL Sour Highly Corrosive H2S and CO2 410 Stainless Steel 410 Stainless Steel Inconel 718 w/hard facing Viton 304or 316SS API CLASS HH High Corrosion w/625 Claded w/625 Claded Inconel 718 Inconel 718/625 w/hard facing Inconel 718/625 w/hard facing Viton Inconel

Slab Gate Valves The Apache slab gate is a high performance, bidirectional slab gate valve is ideal for high pressure, critical service applications from 3,000 psi through 20,000 psi.

Apache slab gate valves come in a variety of trim and product service levels, please consult the trim chart or specify well conditions at time of inquiry for the best trim and PSL level for your

16 Slab Gate Valves The Apache slab gate is a high performance, bidirectional slab gate valve is ideal for high pressure, critical service applications from 3,000 psi through 20,000 psi. Apache slab gate valve utilitizes a forged body and bonnect with alloy steel and at the minimum meets API PSL 2 requirements. Apache slab gate valves come in a variety of trim and product service levels, please consult the trim chart or specify well conditions at time of inquiry for the best trim and PSL level for your application. Also available in ball screw or hydraulic operation at higher pressure ratings. Flanged 5,000 psi working Pressure Size A (Bore, inch) B (inch) C (inch) D (inch) E (inch) API Ring Wt (lbs) 2-1/16" R /16" R /8" R /16" R /8" R /16" x 6" R /16" x 6-3/8" R /16" R Flanged 10,000 psi working Pressure Size A (Bore, inch) B (inch) C (inch) D (inch) E (inch) API Ring Wt (lbs) 1-13/16" BX /16" BX /16" BX /16" BX /16" BX /8" BX Flanged 15,000 psi working Pressure Size A (Bore, inch) B (inch) C (inch) D (inch) E (inch) API Ring Wt (lbs) 1-13/16" BX /16" BX /16" BX /16" BX

Expanding Gate Valves The Apache expanding gate valve is a bi-directional, with a preferred sealing side valve.

Supplied in flanged or threaded connections.

manufacturer and distributors for easy repair and maintenance.

of inquiry for the best trim and PSL level for your application.

17 Expanding Gate Valves The Apache expanding gate valve is a bi-directional, with a preferred sealing side valve. For wellhead, production trees, and manifold applications with working pressure rated up to 5,000 psi. Supplied in flanged or threaded connections. Apache expanding gate valves utilizes a wedge gate design for easy manual operation and parts are usually compatible with most major manufacturer and distributors for easy repair and maintenance. Apache expanding gate valves comes in variety of trim and product service levels, please consult trim chart or specify well conditions at time of inquiry for the best trim and PSL level for your application. Threaded Size A (Bore, inch) B (inch) C (inch) D (inch) E (inch) # of Turns Wt (lbs) 2-1/16" /16" / /8" /16" /2 454 Flanged Size A (Bore, inch) B (inch) C (inch) D (inch) E (inch) # of Turns Wt (lbs) 2-1/16" /16" / /8" /16" /

Consumables Ring Joint Gaskets Apache carries a wide selection of Ring

R-Type Octagonal gaskets designed for flanges up to 5,000 psi RX-Type

pressure-energized for improved sealing efficiency BX-Type High pressure

Designed with pressure balance hole to equalize potential trapped gases

B7 Stud and nuts B7 bolts are available in either two nuts per stud, tap

Special tap end thread configuration, finish or length requirements are

Needle Valves Apache offers a full line of needle valves in carbon steel

Various body style and seat selection ensures the right valve for your

18 Consumables Ring Joint Gaskets Apache carries a wide selection of Ring Joint Gaskets in low carbon steel or stainless 316. R-Type Octagonal gaskets designed for flanges up to 5,000 psi RX-Type Interchangeable with R-type gaskets RX-type gaskets are pressure-energized for improved sealing efficiency BX-Type High pressure gaskets for working pressures up to 20,000 psi. Designed with pressure balance hole to equalize potential trapped gases within the grooves. B7 Stud and nuts B7 bolts are available in either two nuts per stud, tap end or combo styles. Standard B7 are black finish. Special tap end thread configuration, finish or length requirements are available upon request. Needle Valves Apache offers a full line of needle valves in carbon steel AISI 1040 or Stainless 316. Various body style and seat selection ensures the right valve for your application. Available in 6,000 psi and 10,000 psi. Oilfield Ball Valves Carbon by Stainless threaded ball valves with pressure rating up to 5,000 psi. Available from 1 to 3 in both reduced and full port. All oilfield ball valves are equipment with a grease fitting. Also available in bolted pattern body style. 16

19 APACHE PRESSURE PRODUCTS 3909 BAILEY AVE MANVEL, TX (713) (713)

20 1. PRICING - Products and services provided will be invoiced at the price shown and agreed upon at the time of service, invoice, or, as printed on any and/or all Apache Pressure Products sales/information material including purchase orders, letters, or s. Printed prices do not include freight or any applicable taxes. Taxes and other fees such as shipping will be quoted and or billed as per order, or as required. 2. TERMS OF PAYMENT Payment is due upon receipt or as agreed to by contract. Any unpaid past due balance will accrue interest and penalties at the rate of 12% APR, or the max allowed by state law, for the period that the past due balance remains unpaid, and shall not be less than twenty dollars ($20.00). Further customers agree to pay all attorney and/or collection fees and waives notice of such should subsequent litigation become required to effect collection or to assert our interest for unpaid balances. 3. QUOTATIONS - All quotations and sales are F.O.B. our plant in Manvel, Texas. Net prices and discounts are subject to change without notice. Prices in effect at the time of receipt of order whether higher or lower, will prevail. All sales tax, use tax, or other excise taxes which may be required by law to be paid in connection with any sale will be added to the gross sales price. 4. DELIVERY/FREIGHT - All shipments are F.O.B. Manvel, Texas unless otherwise stated. All promises of shipments are as closely estimated as possible. We will make every effort to ship within the time promised, but do not guarantee to do so, or assume further or implied liability with respect to delivery dates or timelines. Our responsibility ceases upon delivery to any common carrier or other agent furnished or specified by the customer and we do not, unless previously instructed, insure shipments beyond the point of delivery to such carriers. Full freight allowance will be covered on individual orders of $ $ based upon the state to which the shipment will be delivered to. The Freight carrier will be chosen by the seller unless otherwise instructed or agreed upon in advance by both parties. Individual orders that do not meet the required amount will not receive freight allowance. 5. SHORTAGES AND DAMAGES IN TRANSIT - All claims for shortages or damaged products must be made within five days after receipt of shipment. All lost or damaged materials in transit become the responsibility. 6. WARRANTY - This warranty is in lieu of all other warranties, expressed or implied, including any implied warranty or merchantability or fitness for any use or purpose. All of Apache Pressure Products INC. products are warranted to be free from manufacturing defects and workmanship for a period of one (1) year from the date of shipment, and if found to be defective within that period the product will be replaced at no charge to the customer. However, the product being returned must have been used in accordance with the intended or published purpose, and approved installation and operating practices. There must be a properly filled out return authorization (RA) before credit or replacement will be offered. 7. CANCELLATIONS/CHANGES - Cancellations or instructions to change work or delivery must be submitted in writing to the seller. If any order is canceled the buyer will be responsible for the payment of work already performed and any material already in use.

GWC Valve International. Proven technology for individual valve solutions worldwide

GWC Valve International. Proven technology for individual valve solutions worldwide GWC Valve International Proven technology for individual valve solutions worldwide THREADED AND SOCKETWELD FLOATING Ball Valves SIZE RANGE: 1/4-3 Catalog Number SBV-1001 TABLE OF CONTENTS Ordering Guide