Air operated diaphragm pumps are a type of reciprocating diaphragm pump which contains two (2) diaphragms and is powered/ driven by compressed air.

Transcription

1 1 AODD Pumps Description typical ApplicAtiOns & OPERATION PRINCIPLE Features & Benefits TECHNICAL DATA Air operated diaphragm pumps are a type of reciprocating diaphragm pump which contains two () diaphragms and is powered/ driven by compressed air. Air operated diaphragm pumps are used in endless applications in mining, industrial and general plant service in any of the following applications: 1. Chemical transfer.. De-watering underground mines particularly coal mines. 3. Food/ Pharmaceutical manufacturing.. Where the liquid being pumped has a high solids content or high viscosity. 5. Where electricity isn't available or in explosive/ flammable environments. Some of the myriad features and benefits exhibited by AODD pumps include: Can run dry indefinitely without damage Can be dead-headed without damage Low shear pumping action. Self-compensating design limits damage caused by misuse. No mechanical seal minimising damage leakage points. Rapid self-priming up to 7m. Variable speed. COMPLETE PACKAGED PUMP SOLUTIONS

2 Why use an AODD Pump A= Excellent B= Good C= Fair D= Poor Solids Passage Shear Sensitivity Abrasives Handling Solids Handling Dry Priming Viscous Fluids Handling Maintenance Costs PUMP TYPE AODD Pump A A A A A A A Vane Pump D D D A B C C Internal Gear Pump D D B B C A D External Gear Pump D D D B C A D Lobe Pump A C B C C A D Centrifugal Pump D D B B C D B Progressive Cavity Pump D C A B A A D Piston/ Plunger Pump C D B C A A D Self-Priming Portable High vacuum Run-dry capable No heat generation Positive Suction Head Preferred installation for high viscosity applications Flow-through capability Inlet pressure should be limited to 0.7 bar ( psig) to maximise parts life Submerged Air-operated pumps (nonelectrical) Submersible option required Single-point exhaust options available Multiple material options available for process fluid compatibility 1300 ALLPUMPS (55 76)

3 3 MarKets served Energy Wilden s pumping solutions are leading the way in energy efficiency in storage terminals, biofuels and solar cell manufacturing. Wilden pumps play a vital role as transfer points from one mode of transportation to another and as safe, secure storage locations until product transfer is needed. Wilden is also committed to helping build a clean energy economy through the use of biofuels. Typical Applications Handled: Raw crude oil Refined petroleum products Chemicals Solvents Caustics Solar cell manufacturing Ethanol Petroleum Biodiesel Lube oils Gases Gasoline Crude oil Diesel fuel PROCESS Wilden is a recognised leader in the process industries as you can find Wilden pumps in many of the top chemical, food and beverage and pharmaceutical plants around the world. Typical Applications Handled: Acids Soap & detergents Solvents Paints, inks & coatings General chemicals Cosmetics Pulp and paper Solvent-less coating Low solvent coating Alcohols Caustics HYGIENIC Wilden offers a wide range of hygienic and bio-pharmaceutical pumps for various food, beverage, dairy, personal care and pharmaceutical applications. When it comes to safety, performance and gentle transfer solutions, trust Wilden: the evolution of clean. Typical Applications Handled: Personal care Pharmaceutical/biopharm Confectionery Sauces, purees and beverages Fruits and vegetables High purity product transfer Poultry, fish and meat Solvent-less coating Filling/batching Ingredient receiving/ unloading Dairy WATER / WASTEWATER Wilden plays a critical role in handling and transferring fluids used in municipal and industrial water and wastewater plants. Typical Applications Handled: Wastewater systems Potable water systems Rehabilitation systems Water treatment supply Distribution Collection and disposal Metal fabrication COMPLETE PACKAGED PUMP SOLUTIONS

4 MATERIALS OF CONSTRUCTION OPTIONS The Wilden range has the widest of pump materials of construction options available in the field of air operated diaphragm pumps. Wetted/ Non-Wetted Materials METAL Aluminium Cast Iron 316 Stainless Steel 316 Hastelloy C Plastic Polypropylene PVDF TEMPERATURE LIMITS FOR PLASTICS Polypropylene 0 C to 79. C Polyethylene 0 C to 70 C PVDF (Kynar) -1. C to 7. C Teflon PFA C to 7. C Acetal -.9 C to. C Nylon -17. C to93.3 C C to 1.9 C Ultrapure II and III models only. ELASTOMERS The liquids classified and listed below usually cannot be handled with Neoprene or Buna-N and will probably require Wil-Flex TM, Viton, Nordel and/or Teflon. Ultra-Flex Diaphragm Technology. Wilden offer a range of diaphragms in their Ultra-flex program which guarantees longer life. The Ultra-Flex has a convolute shape, altered fabric placement which with unique hardware work together to decrease unit loading on the diaphragm and distribute stress. Material options include: Neoprene, Buna-N, EPDM, Viton ALLPUMPS (55 76)

5 5 MATERIALS OF CONSTRUCTION OPTIONS COMPOUNDS Wilden pumps use a variety of rubber compounds manufactured specifically for use as elastomers. These compounds consist of natural rubber and man-made additives to increase the compounds resistance to specific types of fluids. Diaphragms made of these compounds are all reinforced with a nylon fabric mesh which lends dimensional stability and strength to the compound. COMPOUND COLOUR CODE Neoprene Green NE MOULD STAMP Buna-N Red BN EPDM Blue ND Viton Silver VT THERMOPLASTIC COMPOUNDS TEMPERATURE LIMITS -17. C to 93.3 C -1. C to. C C to 137. C -.0 C to 76.7 C SUITABLE APPLICATIONS An excellent general purpose material for use in non-aggressive applications such as water based slurries, well water or sea water. Exhibits excellent flex life and low cost. Excellent for applications involving petroleum/oil-based fluids such as leaded gasolines, fuel oils, non-synthetic hydraulic oils, kerosene, turpentines and motor oils. Excellent for use in applications requiring extremely cold temperatures. May also be used as a low cost alternative when pumping dilute acids or caustics. Excellent for use in applications requiring extremely hot temperatures. May also be used with aggressive fluids such as aromatic or chlorinated hydrocarbons and highly aggressive acids. Teflon would normally be used for these applications as its flex life is better than Viton however, in applications requiring a suction lift outside the range of Teflon, Viton will be the preferred option. Along with rubber compound elastomers, Wilden also use various thermoplastic elastomer compounds, listed below. These compounds are made entirely of man-made elements and are injection moulded to shape. They do not require reinforcing due to their inherent dimensional stability and tensile strength. COMPOUND Polyurethane Wil-Flex Saniflex COLOUR CODE Clear Orange Cream TEMPERATURE LIMITS -1. C to 65.6 C - C to 7. C -.9 C to. C Geolast Red - C to C SUITABLE APPLICATIONS An excellent general purpose material for use in non-aggressive applications. Exhibits excellent flex life and durability. Wilden s most economical diaphragm. Also available as part of the EZ-Instal flex profile diaphragm line. Made of Santoprene, this material is an excellent low cost alternative to in many acidic and caustic applications such as sodium hydroxide, sulfuric or hydrochloric acids. Wil-Flex offers excellent abrasion resistance and durability at a cost comparable to Neoprene. Sanitary options include: full stroke length Integral Piston Diaphragms (IPD) and a sanitary material with a special profile allowing for an easy install. Made of Hytrel, Saniflex diaphragms exhibit excellent abrasion resistance, flex life and durability. This material is FDA approved for food processing applications. This outstanding general purpose diaphragm is also available as part of the Ez-Instal Flex-profile line. Equivalent to Nitrile (Buna-N) Geolast is an injection moulded material that is an excellent choice for applications requiring enhanced oil resistance. This material exhibits exceptional performance for a variety of fluids. ELASTOMERS Teflon is one of the most chemically inert man-made compounds known. Wilden engineers were the first to discover that by reinforcing a moulded Teflon diaphragm with concentric ribs they could control the flex pattern. The ribbed design extended the flex life 5 times longer than that of any other diaphragms. This mad the use of Teflon in diaphragm pumps cost effective, greatly expanding the range of applications where a diaphragm pump can be utilised. As it is not an elastic material, Teflon diaphragms require a rubber back-up diaphragm to provide flexibility and memory. COMPOUND COLOUR CODE TEMPERATURE LIMITS SUITABLE APPLICATIONS Teflon White -. C to. C Excellent choice when pumping highly aggressive fluids such as aromatic or chlorinated hydrocarbons, acids, caustics, ketones and acetates. Exhibits good flex life when compared to a standard rubber diaphragm pump. Wilden also offers integral piston diaphragms that offer superior product containment. The smooth contoured shape makes this an excellent choice for sanitary or ultra-pure applications. COMPLETE PACKAGED PUMP SOLUTIONS

6 air DistributiOn SYSTEMS 6 Market Position: Features: Application Traits: Cost efficient: 50% less expensive than an electronically actuated ADS Simple and durable pump design Greater yield per SCFM of air used Faster return on investment Simple components Wider application range Robust design for harsh operating conditions Faster,easier setup time Repeatable,predictable performance Metered air consumption for less product waste Plug-N-Play operation Less product waste Creates the highest performance ratio No electricity needed Max Mean Time Between Repair (MTBR) Superior flow rate Precise flow rate at start-up Increased application range/ compatibility Superior anti-freezing Non-stalling unbalanced spool Minimum training required Single-point exhaust options Lube-free operation Reduced maintenance costs ON/OFF reliability Environmental sensitivity Drop-in configuration capability Reduced energy consumption Lower carbon footprint ATEX-compatible for use in explosive atmospheres No special skill set needed for maintenance or operations Market Position: Features: Application Traits: Availability: Variable control (discharge flow rates & air consumption) Superior flow rate Efficiency Management System (EMSTM) Metal and plastic material options Maximise performance and efficiency Process applications 13mm(1/") 5mm(1") Superior anti-freezing Non-stalling unbalanced spool Max.MeanTime 3mm(1-1/") Submersible options Simple and durable design Between Repair (MTBR) 51mm(") Lube-free operation 76mm(3") ON/OFF reliability mm(") Most efficient flow rate per air consumption usage ATEX models available Market Position: Features: Application Traits: Availability: Anti-freezing Plastic center block Maximum reliability 6mm(1/") ON/OFF reliability Non-stalling unbalanced spool Process applications 13mm(1/") Longest-lasting wear parts Simple and durable design Max. Mean Time Between Repair (MTBR) 5mm (1") Lube-free operation 3mm (1-1/") 51mm (") 1300 ALLPUMPS (55 76)

7 7 air DistributiOn SYSTEMS Market Position: Features: Application Traits: Availability: Direct electrical interface Externally controlled System automation 6mm(1/") Superior ON/OFF reliability Various voltage options - ma ph Adjusting 13mm(1/") Reduced systems costs Nema, Nema 7 or ATEX Batching applications 5 mm (1") Lube-free operation Simple installation OEM accounts Market Position: Features: Application Traits: Availability: Low initial cost Metal air distribution system Utilitarian type applications 13mm (1/") Largest installed base Durable Robust design 5mm (1") Proven technology Fewest replaceable parts Submersible 3mm (1-1/") Originated the AODDP industry Ease of maintenance Portable 51mm (") 76mm (3") Size Series Original Advanced Material of Construction Plastic Metal Plastic Metal 1/" ü ü ü ü ü 1/" ü ü ü ü ü ü 1" ü ü ü ü ü ü ü ü ü ü ü 1 1/" ü ü ü ü ü ü ü ü ü ü ü " ü ü ü ü ü ü ü ü ü ü ü 3" ü ü ü ü ü ü ü " ü ü ü Pro-Flo S Pro-Flo X Pro-Flo Accu-Flo Turbo-Flo Pro-Flo S Pro-Flo X Pro-Flo Accu-Flo Turbo-Flo Pro-Flo S Pro-Flo X Pro-Flo Accu-Flo Turbo-Flo Pro-Flo S Pro-Flo X Pro-Flo Accu-Flo Turbo-Flo COMPLETE PACKAGED PUMP SOLUTIONS

8 Principles of operation Things to Think About When Selecting an Air-Operated Double-Diaphragm Pump (AODDP) Application What application will the pump be used in? What are you pumping? Do you need lube-free operation? Does the pump need to be submersible? Air Distribution System (ADS) What ADS best suits your application needs? How reliable is the ADS? How efficient is the ADS? Do you need on/off reliability? Installation Before installation please read the caution section of the pump manual. What are your piping considerations (valves, elbows, pipe friction losses, etc.)? Do you have sufficient air pressure and air volume for the pump? What is the MTBR (Mean Time Between Repair) of the AODDP? Wetted Materials What media will you be pumping? What is the chemical compatibility of the elastomer? What are the temperature limits of the wetted material and elastomer? Distributors Is your distributor local? Can the distributor fully support your fluid transfer needs? Are they a full-stocking, full-service distributor? Resources Locating your Authorised Wilden Distributor: Everything you need to know about a Wilden pump: Pump Users Guide II (Consult the factory or your Wilden Distributor) What cleaning fluids would be used to clean the pump? What are your performance parameters (flowrates, air consumption, viscosities, suction lift)? Do you need a pulsation dampener? Is the pump ADS ATEX approved? Does the ADS have anti-freezing technology? Does the ADS have integrated variable performance controls? What are your installation parameters (self priming, positive suction head, high vacuum, heat generation, dry run capable, submersible, large solids passage, variable flow & pressure, shear sensitive)? Ease of maintenance: is the pump easy to clean, assemble/disassemble? How abrasive is the media being pumped? Do diaphragm configurations affect flow? How good is delivery? Is it less than 3 weeks? Is the distributor formally educated in specifying and maintaining your system? Engineering & Operations Manuals: in the Tech Info section Cavitation and Friction Guide & Safety Supplement: in the Tech Info section Electronic Chemical Guide & Conversion Calculator: in the Tech Info section 1300 ALLPUMPS (55 76)

9 9 See How It Works Figure 1. Air supply is directed to the left air chamber behind diaphragm A. Diaphragm A is driven by compressed air away from the center section and toward the liquid chamber. The opposite diaphragm (diaphragm B) is pulled in by the common shaft. Diaphragm B is now on its suction stroke while diaphragm A is on its discharge stroke. The movement of diaphragm B toward the center block opens the bottom right check valve and closes the upper right check valve. This movement creates a vacuum within liquid chamber B. Atmospheric pressure forces fluid into the inlet manifold, past the lower right inlet check valve and into liquid chamber B. When the pressurized diaphragm A reaches its full stroke, the air distribution system redirects the air supply to the back side of diaphragm B. Figure. The pressurized air forces diaphragm B away from the center block and the common shaft pulls diaphragm A toward the center section. The air chamber on side A, exhausts its air to atmosphere. Diaphragm B is now beginning its discharge stroke, while diaphragm A is beginning its suction stroke. The movement of diaphragm B toward the center block, opens the bottom right check valve and closes the upper right check valve. Diaphragm A creates a vacuum that begins to open the inlet check valve (lower left) and closes the discharge check valve (upper left). Figure 3. These same hydraulic forces lift the discharge valve ball off its seat while the opposite discharge valve ball is forced onto its seat, forcing fluid to flow through the left side of the pump and out the discharge manifold. The movement of diaphragm A to the center block of the pump creates a vacuum within liquid chamber A. Atmospheric pressure forces fluid into the inlet manifold of the pump. The inlet valve ball is forced off its seat allowing the fluid to enter the right liquid chamber. As the pump reaches its original starting point, each diaphragm has gone through one suction and one discharge stroke. This movement constitutes one pumping cycle. The pump will take several cycles to completely prime depending on the application variables. COMPLETE PACKAGED PUMP SOLUTIONS

10 Original Series Pump Features ADS:Pro-Flo, Pro-FloX TM, Accu-Flo TM Anti-freezing technology Large solids passage Portable & Submersible Multiple liquid connections available Lube-free options Tech Data Sizes: 6mm (1/") through 51mm (") Materials: Polypropylene, PVDF, PFA Material Temperatures: Up to 7 C (5 F) Elastomers: Buna-N, Neoprene, EPDM, Viton, Wil-Flex TM, Saniflex TM, Polyurethane,, Geolast Performance Data Max flow rates: 591 lpm (156gpm) Max suction lift: 9.5 m (31.0') Wet, 7.0 m (3.0') Dry Max disp.per stroke:.9l (0.77gal) Max discharge pressure:.6bar (15psig) Max size solids: 6.mm (1/") Advanced Series Pump Features ADS: Pro-Flo SHIFT, Pro-Flo, Pro-Flo X, Accu-Flo All metal bolted construction Higher flow rates Superior containment Anti-Freezing technology Portable & Submersible BSPT (NPT) or DIN (ANSI) liquid connections available Lube-free operation Tech Data Sizes: 6 mm (1/") through 76 mm (3") Materials: Aluminum, Ductile Iron, Stainless Steel, Alloy C Elastomer Temperatures: Up to 177 C (350 F) Elastomers: Buna-N, Neoprene, EPDM, Viton, Wil-Flex, Saniflex, Polyurethane,, Geolast Performance Data Max flow rates: 1 lpm (70 gpm) Max suction lift: 9.5 m (31.') Wet, 7.6 m (5.0'), Dry Max disp. per stroke: 6.09 L (1.61 gal) Max discharge pressure: 1 bar (30 psig) Max size solids: 76 mm (3") 1300 ALLPUMPS (55 76)

11 11 PUMP DESCRIPTION SYSTEM XXXXX / XXXXX / XXX / XX / XXX / XXXX MODEL AIR DISTRIBUTION SYSTEM ATEX ATEX X = ATEX 0 AIR DISTRIBUTION SYSTEM AxP = ACCU-FLO -PRO-FLO BASE AxT = ACCU-FLO - TURBO-FLO BASE AxB = ACCU-FLO - BLOCK BASE H = HIGH PRESSURE HxS = HIGH PRESSURE - SIMPLEX TYPE P = PRO-FLO PV = PRO-FLO V PX = PRO-FLO X T = TURBO-FLO UA = UNI-FLO A-SERIES UH = UNI-FLO H-SERIES US = UNI-FLO S-SERIES UU = UNI-FLO U-SERIES UX = UNI-FLO X-SERIES MODEL SIZE 05 = 6 mm (1/") 03 = mm (3/") 050 = 13 mm (1/") 075 = 19 mm (3/") 1 = 13 mm (1/") = 5 mm (1") 3 = 3 mm (1-1/") = 3 mm (1-1/") = 51 mm (") 15 = 76 mm (3") = mm (") 5 = 6 mm (1/") 3 = mm (3/") 0 = 13 mm (1/") 0 = 5 mm (1") 0 = 3 mm (1-1/") 00 = 51 mm (") = 51 mm (") TOP INLET 1500 = 76 mm (3") 15 = 76 mm (3") TOP INLET WETTED PARTS & OUTER PISTON AA = ALUMINUM / ALUMINUM AM = ALUMINUM / MILD STEEL AS = ALUMINUM / STAINLESS STEEL AZ = ALUMINUM / NO OUTER PISTON DZ = CONDUCTIVE POLYETHYLENE / NO OUTER PISTON EZ = POLYETHYLENE / NO OUTER PISTON FZ = CONDUCTIVE / NO OUTER PISTON HH = ALLOY C / ALLOY C HZ = ALLOY C / NO OUTER PISTON KK = PVDF / PVDF KZ = PVDF / NO OUTER PISTON PP = POLYPROPYLENE / POLYPROPYLENE PK = POLYPROPYLENE / PVDF PZ = POLYPROPYLENE / NO OUTER PISTON TT = / TZ = / NO OUTER PISTON O-RINGS VALVE SEAT VALVE BALLS/CHECKS DIAPHRAGMS AIR VALVE CENTER BLOCK OR CENTER SECTION AIR CHAMBER OR CENTER SECTION WETTED PARTS AND OUTER PISTON SS = STAINLESS STEEL / STAINLESS STEEL SZ = STAINLESS STEEL / NO OUTER PISTON WW = DUCTILE IRON / DUCTILE IRON WM = DUCTILE IRON / MILD STEEL WS = CAST IRON / MILD STEEL WZ = DUCTILE IRON / NO OUTER PISTON AIR CHAMBER* A = ALUMINUM C = COATED ALUMINUM M = MILD STEEL N = NICKEL PLATED ALUMINUM P = POLYPROPYLENE S = 316 STAINLESS STEEL S = 316L STAINLESS STEEL V = HALAR COATED ALUMINUM W = DUCTILE IRON CENTER BLOCK* A = ALUMINUM C = COATED ALUMINUM M = MILD STEEL N = NICKEL PLATED ALUMINUM P = POLYPROPYLENE S = 316 STAINLESS STEEL S = 316L STAINLESS STEEL CENTER SECTION* AA = ALUMINUM DD = CONDUCTIVE POLYETHYLENE EE = POLYETHYLENE FF = CONDUCTIVE GG = CONDUCTIVE ACETAL JJ = CONDUCTIVE POLYPROPYLENE KK = PVDF LL = ACETAL PP = POLYPROPYLENE TT = YY = NYLON AIR VALVE A = ALUMINUM B = BRASS C = PFA COATED BRASS D = BRASS W/OIL BOTTLE E = POLYETHYLENE G = CONDUCTIVE ACETAL J = CONDUCTIVE POLYPROPYLENE K = PVDF L = ACETAL N = NICKEL PLATED BRASS P = POLYPROPYLENE S = STAINLESS STEEL DIAPHRAGMS AWS = WIL-FLEX, SOFT SHORE BNL = BUNA-N, IPD (Red Dot) BNS = BUNA-N (Red Dot) BNU = BUNA-N, ULTRA-FLEX (Red Dot) EPL = EPDM, IPD (Blue Dot) NOTE: Not all combinations are available on all pump models. *Some models use a single piece CENTER SECTION that incorporates air chambers and the center block into one part. EPS EPU FBS FES FNS FSS FVS FWS LEL LNL NES NEU PEL PUS TEL TEU TFL THU TNL TNU TSU TVL TVU VTS VTU WFS XBS XES XNS XVS = EPDM (Blue Dot) = EPDM, ULTRA-FLEX (Blue Dot) = SANITARY BUNA-N (Two Yellow Dots) = SANITARY EPDM (Two Blue Dots) = SANITARY NEOPRENE = SANIFLEX (Cream) = SANITARY VITON (Two White Dots) = SANITARY WIL-FLEX = EPDM BACKED, IPD (White) = NEOPRENE BACKED, IPD (White) = NEOPRENE (Green Dot) = NEOPRENE, ULTRA-FLEX (Green Dot) = POLYETHYLENE, IPD = POLYURETHANE (Clear) = w/epdm BACK-UP O-RING, IPD (White) = w/epdm BACK-UP (White) =, IPD, NO BACK-UP (White) = w/high TEMP BUNA-N BACK-UP (White) = w/neoprene BACK-UP O-RING, IPD (White) = w/neoprene BACK-UP (White) = w/saniflex BACK-UP (White) = w/viton BACK-UP O-RING, IPD (White) = w/viton BACK-UP (White) = VITON (White Dot) = VITON, ULTRA-FLEX (White Dot) = WIL-FLEX (Orange Dot) = CONDUCTIVE BUNA-N (Two Red Dots) = CONDUCTIVE EPDM (Two Blue Dots) = CONDUCTIVE NEOPRENE (Two Green Dots) = CONDUCTIVE VITON (Two White Dots) VALVE BALLS BN = BUNA-N (Red Dot) EP = EPDM (Blue Dot) FB = SANITARY BUNA-N (Two Yellow Dots) FE = SANITARY EPDM (Two Blue Dots) FS = SANFLEX (Cream) FV = SANITARY VITON (Two White Dots) SPECIALTY CODE (if applicable) FW = SANITARY WIL-FLEX NE = NEOPRENE (Green Dot) PU = POLYURETHANE (Brown) TF = (White) SS = STAINLESS STEEL VT = VITON (White Dot) WF = WIL-FLEX (Orange Dot) CHECK VALVES CE = POLYETHYLENE CYLINDER CT = CYLINDER (White) SF = 30 STAINLESS STEEL FLAP SF = 316L STAINLESS STEEL FLAP TM = MUSHROOM (White) F = 316L STAINLESS STEEL FLAP ( ) VALVE SEAT A = ALUMINUM BN = BUNA-N (Red Dot) D = CONDUCTIVE POLYETHYLENE (Black) E = POLYETHYLENE (White) EP = EPDM (Blue Dot) F = CONDUCTIVE (Black) FS = SANIFLEX (Cream) G = CONDUCTIVE ACETAL (Black) H = ALLOY C K = PVDF M = MILD STEEL NE = NEOPRENE (Green Dot) P = POLYPROPYLENE PU = POLYURETHANE (Brown) S = STAINLESS STEEL S = 316L POLISHED STAINLESS STEEL T = PFA (White) T = (White) VT = VITON (White Dot) WF = WIL-FLEX (Orange Dot) VALVE SEAT AND/OR MANIFOLD O-RING BN = BUNA-N (Red Dot) EP = EPDM (Blue Dot) FS = SANIFLEX (Cream) FS = FLUORO-SEAL PU = POLYURETHANE (Brown) TF = (White) TV = ENCAPSULATED VITON WF = WIL-FLEX (Orange Dot) FLANGE OR MANIFOLD GASKETS EP = EPDM (Blue Dot) FB = SANITARY BUNA-N (Two Yellow Dots) FE = SANITARY EPDM (Two Blue Dots) TF = (White) VT = VITON (White Dot) COMPLETE PACKAGED PUMP SOLUTIONS

12 P.05 METAL PUMP- Original Series P.05 Plastic A 165 B C 1 D 136 E 13 F 11 G 9 H J 6 K 70 L 7 METAL CURVES 1/" PUMPS Model Number Full Designation P1 Wetted Construction 13 mm (1/") (1) [.] Non Wetted Construction Elastomers (1) [.] METAL P.05/AMPPP/WFS/TF/ATF/001 Aluminium Polypropylene Wilflex (Santoprene) P.05/AMPPP/BNS/TF/ABN/001 Aluminium Polypropylene Buna (Nitrile) P.05/SZPPP/TNL/TF/STV/001 Stainless Steel Polypropylene 6 (Neoprene 6 back up) [] [15] [3] [30] [5] [] [15] [3] [30] [5] [53] [61] P.05/SZPPP/EPS/TF/SBN/001 Stainless Steel Polypropylene EPDM (Nordel) P.05 Plastic PUMP- Original Series PX1 A 15 B 5 C 9 D 1 E 163 F 56 G 30 H 30 J 11 K 61 L 7 M 53 N 6 P Ø 5 PLASTIC CURVES Model Number Full Designation Wetted Construction Non Wetted Construction Elastomers P.05/KZPPP/TNL/TF/KTV PVDF (Kynar) [] [15] Polypropylene 6 1 [] [15] [3] [30] [5] (Neoprene back up) [3] [30] [5] [53] P.05/KKPPP/WFS/TF/KWF PVDF (Kynar) Polypropylene Wilflex (Santoprene) 00-9 P.05/PPPPP/BNS/TF/PBN Polypropylene Polypropylene Buna (Nitrile) P.05/PZPPP/TNL/TF/PTV Polypropylene Polypropylene (Neoprene back up) P5 PLASTIC PUMP- Advanced Series P.05 6 mm (1/") METAL 13 mm (1/") METAL P.05 6 mm (1/") PLASTIC T1 13 mm (1/") METAL P1 13 mm (1/") PLASTIC PLASTIC CURVES A 173 B C 5 D 157 P5 E 17 6 mm (1/") F 173 PLASTIC 1 G 61 H 99 J 53 K 1 L M 5 N 150 P0 13 mm (1/") PLASTIC Model Number Full Designation Wetted Construction Non Wetted Construction Elastomers P5/PZPPP/TNL/TF/PTV/001 Polypropylene Polypropylene (Neoprene back up) P5/KZPPP/TNL/TF/PTV/001 PVDF (Kynar) Polypropylene (Neoprene [7.6] [15.1] [.7] [30.3] back [37.9] up) [5.] 1 Performance Curves - 6mm (1/") (5) [] 1 [3.] (1) [1.7] () [13.6] [7.6] () [3.] (3) [5.1] (5) [.5] 3 [11.3] [15.1] 5 [1.9] Performance Curves - 6mm (1/") [] [15] (1) [1.7] [] () [17] [15] 6 [3] 6 [3] (15) [5] [30] [30] (1) [.] () [3] 1 [5] 1 [5] 1 [53] (16) [7.] (5) [.5] 16 [61] 1 [53] Performance Curves - 6mm (1/") [7.6] 1 [] [15.1] () [3.] (3) [5.1] () [13.6] [] () [13.6] 3 [11] (1) [.] N/A () [13.6] (1) [.] (16) [7.] [.7] [30.3] () [3.0] [37.9] [5.] [1] [53.0] (16) [7.] 5 [19] [.6] 1 [3.] (5) [] (1) [] [1.7] [] [15] 1 [] (1) [1.7] () [17] [15] () [13.6] [7.6] () [13.6] 6 [3] () [3.] () [13.6] () [13.6] (1) [.] [] 6 [3] () [3.] (15) [5] [30] (1) [.] (3) [5.1] (1) [.] (16) [7.] [30] (3) [5.1] (5) [.5] 3 [11.3] 3 [11] () [3] [15.1] (16) [7.] 1 [5] (16) [7.] () [3.0] 1 [53] 1 [53] (5) [.5] [1] 1 [5] 1 [53.0] 16 [61] 16 [61] 1 [53] 1 [53] 5 [1.9] 5 [19] 16 [.6] (30) [51] 1300 ALLPUMPS (55 76) () [6] P0 5 mm (1") () [17] () [3] (50) [5] () [17] () [3] (30) [51] () [5] (50) [5]

13 13 1/" PUMPS PLEASE NOTE: Not all material options are listed. Please call 1300 ALL PUMPS to discuss your requirements. 6 mm (1/ ) FNPT AIR INLET S - POLY & PVDF R - TEFLON & GRAPHITE P1 13mm (1/") PLASTIC PUMP 13 mm (1/ ) FNPT ULTRAPURE.615 I.D. [15.6]. O.D. [1.] K L R S P D 13 mm (1/ ) FNPT ULTRAPURE.615 I.D. [15.6]. O.D. [1.] A B C M N E F PLASTIC CURVES P.05 6 mm (1/") PLASTIC J G P1 13 mm (1/") PLASTIC 13 mm (1/ ) FNPT AIR EXHAUST H (1) [1.7] DIMENSION A 31 B 130 C 196 D () [3.] E 1 (3) [5.1] F 56 G 11 H 17 J (5) [.5] 3 K 15 L 11 1 M 3 [] [] [11] [1] N P R S () [13.6] (1) [.] (16) [7.] 5 [19] Performance curves [] [15] () [13.6] () [13.6] (1) [.] 6 [3] (1) [.] [30] 1 [5] (16) [7.] 1 [53] [] [15] 6 [3] [30] 1 [5] 1 [53] [] [15] 6 [3] [30] 1 [5] 1 [53] Model Number Full Designation Wetted Construction Non Wetted Construction Elastomers P1/PPPPP/WFS/WF/KWF Polypropylene Polypropylene Wilflex (Santoprene) P1/PPPPP/TNU/TF/KTV Polypropylene Polypropylene (Neoprene back up) P1/PPPPP/BNS/BN/KBN Polypropylene Polypropylene Buna (Nitrile) P1/KKPPP/TNU/TF/KTV PVDF (Kynar) Polypropylene (Neoprene back up) P1/KKPPP/WFS/WF/KWF PVDF (Kynar) Polypropylene Wilflex (Santoprene) COMPLETE PACKAGED PUMP SOLUTIONS

14 METAL CURVES P.05 6 mm (1/") METAL PX1 13mm (1/") PUMP P1 13 mm (1/") METAL PX1 13 mm (1/") METAL [] (5) [] P.05 6 mm (1/") METAL 1 3 P1 13 () mm [6.] (1/") (5) [.5] METAL DIMENSION [7.6] [11.3] [15.1] A B C 130 () [13.6] D 19 (1) [.] E F 1 PX1 13 mm (1/") G 13 METAL H 1 J 361 K 13 L [15] M [3] [30] 137[5] [53] [61] N 9 P () R[17] (15) [5] S () [3] T 3 T1 U 1 13 mm (1/") V 11 [3.] (1) [1.7] () [3.] (3) [5.1] METAL [1.9] [3.] [7.6] [11.3] 1/" PUMPS () [13.6] [] [] [] 1 [3.] [15] [15] [15] (1) [1.7] 6 [3] [7.6] [30] (5) [] () [17] (15) [5] () [13.6] 6 [3] 6 [3] (5) [] () () [13.6] [17] (3) [5.1] (5) [.5] 3 1 [11.3] [5] [15.1] ()(1) [3.][.] (3) [5.1] (5) [.5] Performance curves [30] [30] (1)(15) [.] [5] (1) [.] () [3] 1 [5] 1 [5] 1 [15.1] [53] (16) [7.] () [3] (16) [7.] 1 [53] 1 [53] 5 [1.9] 16 5 [61][1.9] 16 [61] 16 [61] 1 [] 1 [3.] [] [15] (5) [] (1 [15] ( D P0 13mm (1/") PLASTIC PUMP 1 13 mm (1/") FNPT DIS- CHARGE 13 mm (1/") FNPT INLET B A 6 mm (1/") FNPT AIR INLET K L C E N PLASTIC M H F G 13 mm (1/") FNPT AIR EXHAUST J [] [] [15] [15] 6 [3] 6 [3] [30] [30] 1 [5] 1 [53] 1 [5] 16 [61] 1 [53] DIMENSION A 3 B 51 C 170 D 5 E 77 P0 F 5 13 mm (1/") G 11 PLASTIC N/A H 1 J 170 K 15 L 11 M N 91 P [] [] [] [15] [15] [15] 6 6 [3] [30] 1 [5] 11 [53] 116 [61] [3] [30] [5] [53] 1 Model Number Full Designation Wetted Construction () [13.6] Non Wetted Construction Elastomers (1) [.] 01-9 XPX1/AAAAA/BNS/BN/ABN/001 Aluminium PLASTIC Aluminium CURVES () [13.6] Buna (Nitrile) XPX1/AAAAA/TNU/TF/ATV/001 T1 Aluminium Aluminium (1) [.] (Neoprene Back up) (16) [7.] 13 mm (1/") 01-9 XPX1/SSAAA/FSS/FS/SFS/001 METAL Stainless Steel Aluminium Saniflex (Hytrel (16) [7.] Food Grade) XPX1/SSAAA/TNU/TF/STV/001 Stainless Steel Aluminium (Neoprene back up) P5 6 mm (1/") PLASTIC PLASTIC CURVES P5 6 mm (1/") PLASTIC P0 13 mm (1/") () [13.6] (1) [.] (16) [7.] () [3.0] P0 5 mm (1") PLASTIC 6 [3] [30] 1 [5] 1 [53] Performance curves [7.6] [15.1] () [13.6] (1) [.] (16) [7.] () [17] () [3] (30) [51] N/A 6 [.7] [30.3] () [13.6] () [6] (1) [.] (16) [7.] (50) [5] () [3.0] [37.9] () [3.0] 1 [5.] 1 [53.0] 16 [.6] [] [1 () [13.6 [7.6] () [17] () P [7.6] [15.1] [.7] [30.3] [37.9] [5.] [53.0] [.6] Model Number Full Designation Wetted Construction Non Wetted Construction Elastomers P0/PPPPP/BNS/B/PBN/001 Polypropylene Polypropylene (30) [51] Buna (Nitrile) P0/PPPPP/TNU/TF/PTV/001 Polypropylene Polypropylene (Neoprene back up) P0 () [17] () [3] (30) [51] P0/KKPPP/WFS/WF/PWF/001 PVDF (Kynar) Polypropylene Wilflex (Santoprene) P0/KKPPP/TNU/TF/PTV/001 5 mm (1") PLASTIC PVDF (Kynar) Polypropylene (Neoprene back up) () [6] (50) [5] [7.6] [15.1] () [17] () [3] 6 [.7] () [5] [30.3] [11] [37.9] [5.] [19] [53.0] (50) [5] 16 [.6] [7] [11] [19] [7] 1300 ALLPUMPS (55 76) 30 [11] 50 [19]

15 15 1" PUMPS P-5mm Plastic Pump - Original Series A 77 B 76 C 10 D 9 E 333 F 1 G 7 H 1 J 9 K 10 L 15 M 1 N 11 P 137 R ()[3] (30)[51] DIN ()[6] S DIA T 11 DIA U 15 DIA ANSI S 79 DIA T 9 DIA U 15 DIA Model Number Full Designation Wetted Construction Non Wetted Construction Elastomers ()[3] 0-66 P/PKPPP/BNS/BN/PBN/00 Polypropylene Polypropylene Buna (Nitrile) (50)[5] ()[] () (Full flow with Wilflex/ [] P/PKPPP/TWS/TF/PTV/00 Polypropylene Polypropylene Santoprene back up) P/KKPPP/WFS/WF/KWF/00 PVDF (Kynar) Polypropylene Wilflex (Santoprene) () [13.6] (1)[.] (16)[7.] (Full flow with Wilflex/ 0-1 P/KKPPP/TWS/TF/KTV/00 PVDF (Kynar) Polypropylene ()[3.0] Santoprene back up) P0-5mm Plastic Pump- Advanced Series () [17] 5 [19] A 57 B 66 C 59 ()[3.0] D 31 E 3 F 99 G H 1 J 59 K 31 L [15.1] [.7] [30.3] [37.9] [5.] [53.0] M 3 N 1 P 157 (30) R [51] ()[6] DIN S (50)[5] 5 DIA T 115 DIA U 1 DIA ANSI S 79 DIA T DIA U 16 DIA Performance Curves ()[17] ()[3] (30)[51] Performance Curves Model Number Full Designation Wetted Construction Non Wetted Construction Elastomers 0-5 P0/PKPPP/BNS/BN/PBN Polypropylene Polypropylene Buna (Nitrile) P0/PKPPP/TWS/TF/PTV Polypropylene Polypropylene (Full flow with Wilflex/ Santoprene back up) P0/KKPPP/WFS/TF/KWF PVDF (Kynar) Polypropylene Wilflex (Santoprene) 0-13 P0/KKPPP/TWS/TF/KTV PVDF (Kynar) Polypropylene (Full flow with Wilflex/ Santoprene back up) [11] 15 [57] ()[17] ()[3] (30)[5]() [6] (50)[5] [19] () [13.6] (1) [.] (16) [7.] [7.6] () [17] () [3] 30 [11] 5 [95] [7] 30 [11] [65] 35 [133] 0 90 [303] [3] 50 [19] 16 [.6] [7] 5 [19] 15 [57] () () [17] [17] ()[3] ()[3] (30)[5]() (30)[51] [6] ()[6] (50)[5] () [6] 5 [95] () [] 30 [11] 35 [133] 5 [19] [57] 50 5 [95] [11] [133] [11] [19] [7] [65] [303] [3] () [17] (30)[5] ()[6] 30 [11] 50 [19] [7] 70 [65] [7.6] [7.6] [15.1] ()[17] ()[3] (30)[51] () [13.6] [.7] (1) [.] () [6] 6 [15.1] [.7] ()[17] ()[3] (30)[51] [30.3] (16)(50) [7.] [5] () [5] 30 [11] [30.3] (50) [5] [37.9] [5.] () [3.0] 0 90 [303] [3] [53.0] 50 1 [19] 1 [37.9] [5.] [53.0] 30 [11] [.6] 16 [7] [.6] 50 [19] ()[17] () 5 [19] ()[17] ()[ () [7 () [17 COMPLETE PACKAGED PUMP SOLUTIONS

16 P-5mm METAL Pump - Original Series 1" PUMPS A 7 B 3 C 163 D 5 E 7 F G 1 H 1 J 163 K 30 L 3 M 173 N P 17 R S Performance Curves 16 Model Number Full Designation Wetted Construction Non Wetted Construction Elastomers 0-17 P/AAPPP/BNS/BN/ABN/1 Aluminium Polypropylene Buna (Nitrile) 0-11 P/AAPPP/TWS/TF/PTV/1 Aluminium Polypropylene (Full flow with Wilflex/ Santoprene back up) P/SSPPP/VTS/VT/STF/1 Stainless Steel Polypropylene Viton P/SSPPP/TWS/TF/KTV/1 Stainless Steel Polypropylene (Full flow with Wilflex/ Santoprene back up) PX0-5mm METAL Pump- Advanced Series A 361 B 36 C 163 D 5 E 7 F 56 G 7 H 99 J 1 K 1 L 6 M 173 N P 17 R Performance Curves Model Number Full Designation Wetted Construction BAR FEET PSIG 300 ()[17] Non Wetted Construction 1 ()[3](30) Elastomers [5] AIR CONSUMPTION 0- XPX0/AAAAA/BNS/BN/ABN/001 Aluminium Aluminium 50 ()[6] 7 0 Buna (50) (Nitrile) [5] (SCFM) [Nm 3 /h] XPX0/AAAA/WFS/WF/AWF/067 Aluminium Aluminium 6 0 ()[] 0 Wilflex (Santoprene) XPX0/SSAAA/TWS/TF/STF001F Stainless Steel Aluminium 150 (Full flow with Wilflex/ 3 0 Santoprene back up) XPX0/SSAAA/EPS/EP/SEP/067 Stainless Steel Aluminium EPDM (Nordel) 1300 ALLPUMPS (55 76) Water GPM Flow Rates [LPM] BAR FEET PSIG BAR FEET PSIG ()[17] ()[3] ()[17] 30 [11] 50 [19] 70 [65] 90 [3] ()[1 BAR FEET PSIG ( Water GPM Flow Rates [LPM] [

17 17 1 1/ " PUMPS PX-3mm (1 1/ ) Plastic Pump - Original Series ()[17] ()[3] (30)[51] [57] [95] [11] [133] A 39 B 79 C (50)[5] 7 D ()[] 65 E 5 F 1 G 95 H 137 J 3 K 11 L [11] [19] [7] [65] [303] M 36 N 10 P R DIN S 9 DIA T 150 DIA U 1 DIA ANSI S 99 DIA T 17 DIA U 15 DIA Performance Curves Model Number Full Designation Wetted Construction Non Wetted Construction Elastomers PX/PPAPP/BNS/BN/PBN Polypropylene Polypropylene Buna (Nitrile) PX/PPAPP/WFS/WF/PTV Polypropylene Polypropylene Wilflex (Santoprene) PX/KKAPP/WFS/WF/KTV PVDF (Kynar) Polypropylene Wilflex (Santoprene) 0-1 PX/KKPPP/TWS/TF/KTV PVDF (Kynar) Polypropylene (Full flow with Wilflex/ Santoprene back up) [19] ()[17] ()[3] (30)[5]() [6] () [6] [3] 5 [19] [19] 15 [57] [11] [57] [19] 5 [95] [95] [7] 30 [11] [65] [11] 35 [133] () ()[17] [17]()[3] () ()[3] (30)[5]() (30)[51] [6] ()[6] (50)[5] ()[17] ()[3] (30)[5] ()[6] (50)[5] ()[] () [] 30 [11] 50 [19] [7] 70 [65] () [3] () [](0) [] (0) [136] [303] [133][3] 0 90 [303] [3] () PX0-3mm (1 1/ ) Plastic Pump- Advanced Series Performance Curves A 7 B 1 C 3 (0)[136] D 5 (0)[170] E 66 F 130 G H 137 J 315 K 11 L M [7] 35 [303] [379] [5] N 69 P 175 R S 13 DIN T 1 DIA U 150 DIA V 1 DIA ANSI T 97 DIA U 17 DIA V 15 DIA () [3] () [](0) [] (5) [3] (50) [5] Model Number Full Designation Wetted Construction (5)[3] Non Wetted Construction (5) (5) [3] [3] (50)[5] (50) (50) Elastomers [5] [5] (75)[1] PX0/PPPPP/BNS/BN/PBN Polypropylene (75)[1] Polypropylene Buna (75)[1] (Nitrile) 0-1 PX0/PKPPP/TWS/TF/PTV Polypropylene (0)[170] (0) (0) [170] [170] (Full flow with Wilflex/ Polypropylene (15)[13] Santoprene (15) back [13] up) (15)[13] PX0/KKPPP/WFS/WF/KWF PVDF (Kynar) Polypropylene Wilflex (Santoprene) 0-1 PX0/KKPPP/TWS/TF/KTV PVDF (Kynar) Polypropylene (Full flow with Wilflex/ Santoprene back up) ()[3] ()[] (0)[] (0)[136] (75) [1] [7] [7] (0) [170] [7] (0) [170] (0) [170] (15) [13] 0 [379] 0 [303] 0 [303] 0 [379] 0 [379] 1 [530] 1 [5] 1 [5] 10 [61] ( [7] [379] [530] COMPLETE PACKAGED PUMP SOLUTIONS [61] [7] [7] 0 0 [379] [379] 1 1 [530] [530] [61] [61] (5) [3] (50) [5] (5) [3] (50) [5] (75) [1]

18 PX-3mm (1 1/ ) METAL Pump - Original Series 5 (5) [.5] [19] () [17] ()[17] ()[3] ()[3] ()[6] ()[17] ( (15) [5.5] () [3] (5) [.5] [57] [95] [11] A 36 B 6 (30)[5] C ()[6] 6 D (50)[5] 9 E ()[] 17 F 30 G 11 H 6 J K 15 L M[11] [19] 51 [7] [65] [303] 90 N P 335 R S ()[] 135 T 196 U (0)[136] V 13 (0) [170] [3] 35 [133] [19] (5) [.5] () () [17][3] (15)[5.5] 1 1/ " PUMPS (30)[5] ()[6] ()[3] Performance Curves [19] [3] ()[3] ()[6] [11] 30 [11] 30 [11] [57] (50)[5] (5)[.5] ()[] [57] ()[3] ()[17] ()[6] ()[3] ()[] (30)[5] ()[6] (50)[5] ()[] [6] ()[] (0)[136] [19] [7][95] [65] (0) [136] [] (0)[170] [95] 0 [136] [11] [303] [11] (0) [170] [133] [3] [133] [19] [7] 70[65] 0[303] 90[31] [19] [7] [65] [303] [3] () Model Number Full Designation Wetted Construction [3] Non Wetted Construction Elastomers [3] [6] XPX/AAAAA/BNS/BN/ABN/001 Aluminium Aluminium [6] Buna (Nitrile) 0-16 XPX/AAAAA/VTS/VT/VT/001 Aluminium Aluminium Viton XPX/WMAAA/EPS/EP/EP/001 Cast Iron Aluminium EPDM (Nordel) XPX/SSAAA/TWS/TF/STF/001 Stainless Steel Aluminium 30 [11] 50 [19] [] [7] 70 [65] 0 [136] 0 [303] 90 [31] 30 [11] 50 [19] [] [7] 70 [65] 0 [136] 0 [303] 90 [31] (Full flow with Wilflex/ Santoprene back up) PX0-3mm (1 1/ ) METAL Pump- Advanced Series A 33 B 79 C 3 D 531 E 59 F 1 G 1 H 31 J 9 K L 6 M 15 N 170 P [6] DIN [] R 1 DIA 0 [136] S 150 DIA T 1 DIA 0 [170] ANSI R 9 DIA S 17 DIA T 16 DIA Performance Curves Model Number Full Designation Wetted Construction Non Wetted Construction Elastomers [3] 0-17 XPX0/AAAAA/BNS/BN/ABN Aluminium [6] Aluminium Buna (Nitrile) [] 0-17 XPX0/AAAA/EPS/EP/EP Aluminium Aluminium EPDM (Nordel) XPX0/SSAAA/TWS/TF/STF Stainless Steel 0 [136] Aluminium (Full flow with Wilflex/ Santoprene back up) XPX0/SSSSS/VTS/VT/STF Stainless Steel 0 [170] Stainless Steel Viton [3] [3] [3] [6] [] [6] [] 0 [136] 0 [170] 0 [136] 0 [170] 1300 ALLPUMPS (55 76)

19 19 Pump detail Plastic Pump detail " PUMPS PX-50mm ( ) Plastic Pump - Original Series ()[3] ()[6] B() [] 76 C (0)[136] 1 A 90 D (0)[170] 693 E 770 (1)[] F 9 G 17 H 333 J 31 K 307 L 7 M [7] 5 N 15 DIN/ ANSI COMBO P 1 DIA R 155 DIA S DIA 0 [303] 0 [37] 1 [5] 1 [530] 1 [6] Performance Curves ()[3] ()[6] ()[] (0)[136] (0)[170] (1)[] [7] 0 [303] 0 [37] 1 [5] 1 [530] 1 [6] WETTED NON-WETTED CONSTRUCTION Model Number CONSTRUCTION Full Designation ELASTOMERS Wetted Construction Non Wetted Construction Elastomers Polypropylene 0-13 Polypropylene PX/PPAPP/BNS/BN/PBN Buna (Nitrile) Polypropylene Polypropylene Polypropylene (Full flow with Wilflex/ Santoprene back up) Polypropylene Buna (Nitrile) PVDF (Kynar) Polypropylene Viton (Ultra flex) (Full flow with Wilflex/ PX/PPAPP/TWS/TF/PTV Polypropylene Polypropylene Santoprene back up) P/KKAPP/VTU/TF/KTV PVDF (Kynar) Polypropylene Viton (Ultra flex) stic Pump detail TION WETTED NON-WETTED CONSTRUCTION CONSTRUCTION ELASTOMERS S/BN/PBN Polypropylene Polypropylene Buna (Nitrile) S/TF/PTV Polypropylene Polypropylene (Full flow with Wilflex/ Santoprene back up) U/TF/KTV PVDF (Kynar) Polypropylene Viton (Ultra flex) PX00-50mm ( ) Plastic Pump- Advanced Series eries Plastic Pump detail WETTED NON-WETTED CONSTRUCTION CONSTRUCTION ELASTOMERS F Polypropylene Polypropylene Wilflex (Santoprene) Polypropylene Polypropylene (Full flow with Wilflex/ Santoprene back up) F PVDF (Kynar) Polypropylene EPDM (Nordel) PVDF (Kynar) Polypropylene (Full flow with Wilflex/ Santoprene back up) A 5 B 150 C 79 D 91 E 6 F 05 G H 17 J 356 K 5 L 1 M N 361 P R 3 S 15 [] DIN 0 [136] T 15 DIA 0 [170] U 165 DIA V 1 DIA ANSI T 1 DIA U 15 DIA V DIA Performance Curves Model Number Full Designation Wetted Construction Non Wetted Construction Elastomers 300 (5)[] (50)[5] PX00/PKPPP/WFS/WF/PWF Polypropylene Polypropylene 1 Wilflex (75) (Santoprene) [1] 50 (0)[170] AIR CONSUMPTION WETTED NON-WETTED TION ELASTOMERS 7 0 (15)[13] (SCFM) [Nm (Full flow with Wilflex/ 3 /h] 0-11 CONSTRUCTION PX00/PKPPP/TWS/TF/PTV CONSTRUCTION Polypropylene Polypropylene 6 0 FS/WF/PWF Polypropylene Polypropylene Wilflex (Santoprene) 0 Santoprene back up) WS/TF/PTV Polypropylene PX00/KKPPP/WFS/WF/KWF Polypropylene (Full flow with Wilflex/ PVDF Santoprene (Kynar) back up) 5 Polypropylene 150 EPDM (Nordel) FS/WF/KWF PVDF (Kynar) Polypropylene EPDM (Nordel) WS/TF/KTV 0-1 PVDF (Kynar) PX00/KKPPP/TWS/TF/KTV Polypropylene (Full flow with Wilflex/ PVDF Santoprene (Kynar) back up) (Full flow with Wilflex/ Polypropylene 3 0 Santoprene back up) COMPLETE PACKAGED PUMP SOLUTIONS [7] [379] [530] [61] [33] [3] [6] [3] [3] [6] [6] [] [] 0 [136] 0 [136] 0 [170] 0 [170] (

20 PX-50mm ( ) METAL Pump - Original Series ) Original Series Metal Pump detail NSIONS m) DIA AODD PUMPS ()[3] [11] [19] [7] [65] A ()[3] B ()[6] C ()[] 356 D (0) 630 [136] E 66 (0)[170] F 5 G 61 H 3 J 33 K L [7] 5 [303] [37] [5] M 57 N 31 ()[3] P() [6] 15 ()[] R 6 (0)[136] S (0) 51[170] T U 71 V 79 W 36 X 15 DIA " PUMPS ()[6] Model Number Full Designation Wetted Construction Non Wetted Construction Elastomers XPX/AAAAA/NES/NE/NE/001 Aluminium Aluminium Neoprene XPX/AAAAA/VTS/VT/VT/001 Aluminium Aluminium Viton XPX/WWAAA/BNS/BN/BN/001 Cast Iron Aluminium Buna (Nitrile) XPX/SSSSS/FSS/FS/FS/001 Stainless Steel Stainless Steel Saniflex (Hytrel Food grade) PX00-50mm ( ) METAL Pump- Advanced Series A 39 B 9 C 396 () [6] D () [] 676 E (0) [136] 7 F (0) 9[170] G 117 (1) [] H 35 J 93 K 396 L 330 M 5 N 35 P 379 R 15 [6] DIN/ [] ANSI COMBO S 0 [136] 165 DIA T 0 [170] 1 DIA U DIA () [3] [3] ()[17] ()[3] (30)[5] ()[6] (50)[5] [7] 0 [303] DESIGNATION WETTED NON-WETTED 0 ELASTOMERS CONSTRUCTION CONSTRUCTION [7] [303] XPX/AAAAA/NES/NE/NE/001 Aluminium Aluminium Neoprene XPX/AAAAA/VTS/VT/VT/001 Aluminium Aluminium Viton XPX/WWAAA/BNS/BN/BN/001 Cast Iron Aluminium Buna (Nitrile) XPX/SSSSS/FSS/FS/FS/001 Stainless Steel Stainless Steel Saniflex (Hytrel Food grade) ( ) Advanced Series Metal Pump detail NSIONS m) BO 5 DIA DIA DIA 0 [379] 0 [379] () [] 1 [5] 1 [5] 1 [530] 1 [530] 1 [530] 1 [6] 1 [6] 0 [303] 10 [61] 10 [61] 90 [3] 1 [6] 0 [61] Performance Curves () [3] () [6] 0 [7] () [] [303] (0) [136] (0) [170] (1) [] Performance Curves [] 0 [136] 0 [170] [3] [6] [3] [6] [] 0 [136] 30 [11] () [] [7] 0 [170] (0) [136] 0 [303] 50 [19] ()[3] ()[3] ()[6] () () [6] [] (0)[136] ()[] (0)[136] (0)[170] 0 0 [7] [303] [379] 0 [7] [303] ()[3] ()[6] ()[] [7] 0 [303] [7] (0) [170] (0)[136] (0)[170] 0 [379] 0 [303] 0 [379] (0) [170] 1 [5] 0 [37] (1) [] [7] 1 [5] 0 [37] 0 [379] 1 [5] 70 [65] 1 [5] 0 [303] 1 [530] 90 [3] 1 [6] [530] [6] [61] [5] [530] [6] 1 [530] 1 [5] 1 [530] 1 [6] 1 [530] 1 [6] 10 [61] 1 [6] 10 [61] 0 [61] [ 10 [61] 0 [61] WETTED NON-WETTED DESIGNATION ELASTOMERS CONSTRUCTION CONSTRUCTION XPX00/AAAAA/BNS/BN/ABN Aluminium Aluminium Buna (Nitrile) XPX00/AAAA/TWS/TF/STF Aluminium Aluminium (Full flow with Wilflex/ Santoprene back up) XPX00/SSAAA/TWS/TF/STF Model Number Full Stainless Designation Steel Aluminium Wetted Construction (Full flow with Wilflex/ Santoprene Non Wetted back up) Construction Elastomers XPX00/SSSSS/VTS/VT/STF Stainless Steel Stainless Steel Viton XPX00/AAAAA/BNS/BN/ABN Aluminium Aluminium Buna (Nitrile) 0-19 XPX00/AAAA/TWS/TF/STF Aluminium Aluminium (Full flow with Wilflex/ Santoprene back up) XPX00/SSAAA/TWS/TF/STF Stainless Steel Aluminium (Full flow with Wilflex/ Santoprene back up) XPX00/SSSSS/VTS/VT/STF Stainless Steel Stainless Steel Viton 1300 ALLPUMPS (55 76)

21 1 3" PUMPS P mm (3 ) Plastic Pump- Advanced Series A 91 B 1 C 691 D 179 E 303 F 11 G 1 H 693 J 11 K 5 L 61 M 336 N 1 DIA P 19 ANSI R 1 DIA S 15 DIA T DIA Performance Curve 300 (5)[] (50)[5] (75)[1] (0)[170] AIR CONSUMPTION (15)[13] (SCFM) [Nm 3 /h] [7] [379] [530] [61] [33] Model Number Full Designation Wetted Construction Non Wetted Construction Elastomers PX1500/PSPPP/WFS/TF/KTV Polypropylene Polypropylene Wilflex (Santoprene) PX1500/PSPPP/TWS/TF/KTV Polypropylene Polypropylene (Full flow with Wilflex/ Santoprene back up) COMPLETE PACKAGED PUMP SOLUTIONS

22 eries Metal Pump detail SIGNATION PX15-76mm (3 ) METAL Pump - Original Series ()[3] ()[6] A 505 ()[] B 5 (0)[136] C 36 D 76 E 3 F 71 G H 39 J K [7] [303] 16 [37] L 7 M 599 N 363 P 307 (90) R[153] 57 S (1)[] T (150)[55] 1 U 71 V 69 W 307 X Y 305 Z ALLPUMPS (55 76) 3" PUMPS Model Number Full Designation Wetted Construction Non Wetted Construction Elastomers XPX15/AAAAA/BNS/BN/BN/001 Aluminium ()[] Aluminium Buna ()[] (Nitrile) XPX15/AAAAA/TWS/TF/ATF/001 Aluminium (1)[] Aluminium (Full flow with Wilflex Santoprene (1) back [] up) XPX15/WWAAA/WFS/WF/WF/001 Cast Iron Aluminium Wilflex (Santoprene) XPX15/SSAAA/FSS/FS/FS/0070 Stainless Steel Aluminium Saniflex (Hytrel Food grade) Model Number Full Designation Wetted Construction Non Wetted Construction Elastomers XPX1500/AAAAA/WFS/WF/WF Aluminium Aluminium Wilflex (Santoprene) XPX1500/AAAA/TWS/TF/STF Aluminium Aluminium (Full flow with Wilflex/ Santoprene back up) XPX1500/SSAAA/TNU/TF/STF Stainless Steel Aluminium (Full flow with Neoprene back up) XPX1500/SSSSS/VTS/VT/STF Stainless Steel Stainless Steel Viton AA0 151DIA WETTED NON-WETTED PX mm CONSTRUCTION CONSTRUCTION ELASTOMERS (3") METAL Pump- Advanced Series [7] [303] [379] [5] [530] [6] [61] [757] [33] [90] AA/BNS/BN/BN/001 Aluminium Aluminium Buna (Nitrile) A/TWS/TF/ATF/001 Aluminium Aluminium (Full flow with Wilflex Santoprene back up) AA/WFS/WF/WF/001 Cast Iron Aluminium Wilflex (Santoprene) AA/FSS/FS/FS/0070 Stainless Steel Aluminium Saniflex (Hytrel Food grade) ed Series Metal Pump detail WETTED NON-WETTED SIGNATION ELASTOMERS CONSTRUCTION CONSTRUCTION AAAA/WFS/WF/WF Aluminium Aluminium Wilflex (Santoprene) AAAA/TWS/TF/STF Aluminium Aluminium (Full flow with Wilflex/ Santoprene back up) SAAA/TNU/TF/STF Stainless Steel Aluminium (Full flow with Neoprene back up) SSSS/VTS/VT/STF Stainless Steel Stainless Steel Viton () [3] (30) [51] () [] (30) [51] () [6] [303] (90) [153] 0 1 [5] (0) [170] 0 [6] 1 [5] 0 [757] 1 [530] A 615 B 17 C 533 D 93 E 31 F 165 G 536 H J 11 K L 597 M 363 N 307 P 59 R S 1 DIN T 0 DIA U 1 DIA V 1 DIA 1 [6] [90] [7] [303] [37] [5] [530] Performance Curves (30) [51] () [] (90) [153] (1) [] (150) [55] 0 [303] () [] [7] [303] [379] [5] [530] [6] [61] [757] Performance Curves (0) [136] 1 [5] (30)[51] (30)[51] ()[] ()[] (90)[153] (90)[153] (1)[] (150) (1) [55] [] (0) [170] 1 [6] 0 [757] [90] 1 [6] [303] 0 [5] 1 1[6] 1 10 [757] 0 [90] [7] [303] [379] [5] [530] [6] [61] [757] [33] [90] (30) [51] (90) [153] [33] [90] 15

23 3 " PUMPS PX-0mm ( ) METAL Pump- Advanced Series A 950 B 119 C 19 D 61 E 6 F G H 13 J 170 K L 597 M 55 N 376 P 79 R 333 ANSI COMBO S 15 DIA T 31 DIA U 191 DIA Performance Curve (30)[51] ()[] (90)[153] (1)[] (150)[55] 0 [303] 1 [5] 1 [6] 0 [757] [90] 0 [] 3 [111] Model Number Full Designation Wetted Construction Non Wetted Construction Elastomers -055 PX/WWAAA/NEU/PU/VVT Cast Iron Aluminium Neoprene (Ultra flex) -063 XPX/WWAAA/BNS/PU/PEP Cast Iron Aluminium Buna (Nitrile) Optional Configurations COMPLETE PACKAGED PUMP SOLUTIONS

24 Proflo intro Introducing the world s most energy efficient pump in its class State Of The Art Air Distribution Systems The Pro-Flo SHIFT is the new standard for AODD pumps. The innovative, yet simple, Pro-Flo SHIFT Air Distribution System (ADS) features an air control spool that automatically optimizes air consumption and eliminates the overfilling that can lead to overcharging of the air chamber, all while causing no corresponding reduction in flow rate. The Pro-Flo SHIFT s revolutionary ADS design meters the air flow, allowing for just enough air to keep the pumping process operational. The results are a reduction in air consumption and operational costs while maximum operational efficiency and volumetric consistency are maintained. Now is the perfect time to shift your thinking in AODD pump performance with the game-changing Pro-Flo SHIFT. Application Traits: Greater yield per SCFM of air used Wider application range Repeatable, predictable performance Less product waste Max. Mean Time Between Repair (MTBR) Increased application range compatibility Minimum training required No special skill set needed for maintenance or operation Availability: 3 mm (1-1/") 51 mm (") 76 mm (3") Market Position: Cost efficient: 50% less expensive than an electronically actuated ADS Faster return on investment Robust design for harsh operating conditions Metered air consumption for less product waste Creates the highest performance ratio Superior flow rate Superior anti-freezing Single-point exhaust option Lube-free operation Reduced maintenance costs ON/OFF reliability Environmental sensitivity Features: Simple and durable pump design Simple components Faster, easier setup time Plug-N-Play operation No electricity needed Precise flow rate at start-up Non-stalling unbalanced spool Drop-in configuration capability Reduced energy consumption Lower carbon footprint ATEX-compatible for use That class now has a new leader!!! Pro-Flo Shift Model Inlet/ Discharge Max Discharge Pressure Max Solids Size Max Suction Lift 1300 ALLPUMPS (55 76) Max Flow PS Original Series 3 mm (1-1/")/ 3 mm (1-1/").6 bar (15 psig). mm (3/16") 7.1 m (3.3') Dry,.6 m (.') Wet 375lpm (99 gpm) PS Original Series 51 mm (").6 bar (15 psig) 6. mm (1/") 7. m (3.') Dry, 9.0 m (9.5') Wet 73lpm (191 gpm) PS15 Original Series 76 mm (3").6 bar (15 psig) 9.5 mm (3/ ).6 m (.') Dry, 6.6 m (1.6') Wet 97lpm (5 gpm) PS0 Advanced Series 3 mm (1-1/").6 bar (15 psig). mm (3/16") 5.7 m (1.') Dry,.6 m (.') Wet 507lpm (13 gpm) PS00 Advanced Series 51 mm (").6 bar (15 psig) 6. mm (1/") 6. m (1.0') Dry,.6 m (.') Wet 70lpm (16 gpm) PS1500 Advanced Series 76 mm (3").6 bar (15 psig) 1.7 mm (1/") 7. m (3.') Dry, 9.0 m (9.5') Wet 56lpm (79 gpm)

25 5 PRO-FLO PS-3mm (1 ½ ) - Original Series PS- 3mm (1 ½ ) Original Series Pump A 36 B 6 DIMENSION DIMENSION L PS- 3mm (1 ½ ) Original Series C Pump 31 6 PS0- (MM) 3 A 36 D M 9 A 33 B 6 ) Original Series Pump E N R PS0- B 79 C 31 P 17 3mm (1 ½ ) Advanced Series Pump C 339 F D 9 R S D 531 PS- E 3mm 13 (1 ½ ) Original G S 17 Series Pump T 33 PS0- E 3m DIMENSION 59 F T 33 F 1 DIMENSION DIMENSION G 17 H 3 U U Di G 31 H 3 L 6 J V V 155 H L 6 A 36 J 55 M K W 5193 (MM) M K 51 X DIMENSION W 193 J A B 6 DIMENSION N 150 X A L 51 K B Dimens 30 N 150 L 6 B 79 M C 31 P 17 C (MM riginal P Series 17 Pump R C 339 N 6 A 36 M D 9 R PS0-3mm (1 ½ ) Advanced Series Pump A 33 D 531 P 15 D B 6 N 150 B 79 S E 13 S E 59 R 170 T 33 Model C Number 31 P 17 E Designation Wetted Construction Non Wetted Construction Elastomers C 339 F T 33 D 9 R Model Number F 1 S U D F 531 G E U 13 XPS/AAAAA/BNS/BN/BN/001 S Aluminium G Aluminium 31 DIN Buna (Nitrile) V DIMENSION E 155 G 59 XP Model H T 150 DIA W H Number 3 Full Designation F XPS/WMAAA/NES/NE/NE/001 V 155 T Wetted 33 Construction Cast Iron Non Aluminium Wetted Construction Neoprene Elastomers F XP G 17 U H 1 L J 13 U 1 DIA X 6 13 J W XPS/SSAAA/TWS/TF/STF/ Stainless Steel (MM) (Full flow Teflon with Wilflex/ Santoprene back up) G XPS/AAAAA/BNS/BN/BN/001 H 3 V Aluminium 155 Aluminium Buna (Nitrile) J X M K 51 X 13 A K 30 V 33 L 51 1 DIA H J 55 W 193 N 150 B 79 M J K XPS/WMAAA/NES/NE/NE/001 K 51 X Cast Iron13 Aluminium Neoprene 13 P 17 C 339 N 6 K 30 R signation S D 531 P 15 (Full flow Teflon with Wetted Construction Non XPS/SSAAA/TWS/TF/STF/001 PS- Wetted Construction 50mm ( ) Original Elastomers Series Stainless Steel Pump Aluminium E Model Number 59 Designation R 170 Wilflex/ Wetted Construction Santoprene back Non PS00- Wetted up) Construction T 33 50m /BNS/BN/BN/001 Aluminium Aluminium Buna (Nitrile) F 1 S U Model Number Designation Wetted Construction Non Wetted Construction XPS0/AAAAA/WFS/WF/WF Elastomers Aluminium Aluminium Model Number Designation Wetted Construction G Non Wetted 31 Construction DIN Elastomers A/NES/NE/NE/001 V 155 Cast Iron Aluminium Neoprene Model Model Number Number H XPS0/AAAAA/TWS/TF/ATF T 150 DIA Aluminium Aluminium /TWS/TF/STF/001 W XPS/AAAAA/BNS/BN/BN/ Stainless Steel Aluminium XPS/AAAAA/BNS/BN/BN/001 Aluminium (Full flow Teflon with Wilflex/ Aluminium Aluminium Aluminium Buna Buna (Nitrile) (Nitrile) Santoprene back up) J X XPS0/SSSAA/BNS/BN/BN U 1 DIA Stainless Steel Aluminium XPS/WMAAA/NES/NE/NE/ XPS/WMAAA/NES/NE/NE/001 Cast Iron Cast Iron Aluminium Aluminium K 30 V 1 DIA Neoprene Neoprene A PS-50mm ( ) - Original N Series XPS/SSAAA/TWS/TF/STF/001 Stainless Steel Aluminium (Full flow Teflon with Wilflex/ Santoprene back B (MM) XPS/SSAAA/TWS/TF/STF/001 5 P Stainless 31 Steel Aluminium (Full flow Teflon with Wilflex/ Santoprene back up) A C 363 R 57 B D riginal Series Pump S 15 ion Wetted Construction Non Wetted Construction E 66 Elastomers PS00-50mm Advanced Performance Series Pumps Curve C 396 T 6 Model Number Designation Wetted Construction Non Wetted Construction /BN/BN/001 Aluminium Aluminium F 5 D 676 Buna U (Nitrile) 51 PS- G 50mm 6 ( ) Original XPS0/AAAAA/WFS/WF/WF Aluminium Aluminium V Series Pump /NE/NE/001 Cast Iron Aluminium Neoprene. PS00-50 E 759 H XPS0/AAAAA/TWS/TF/ATF Aluminium Aluminium W 5 F PS- 50mm ( ) Original Series /TF/STF/001 Stainless Steel Aluminium J (Full flow Teflon A Pump with X Wilflex/ Santoprene 79 back up) N 57 PS00- G XPS0/SSSAA/BNS/BN/BN Stainless Steel Aluminium K 339 N 57 Y 396 H 390 L B 5 P 31. (MM) P Z 15 DIA J 161 M C R A L 659. K 33 R 57 A Dimens N 57 B 9 M 330 S 15 B D 630 S 15 (MM 5 P 31 inal C 396 N 5 T Series 6 Pump C 363 E R PS00- T 6 A 39 50mm Advanced Series Pumps D 676 P U A D B Di N F S 515 U V E R 37 B 5 E 66 C 396 W 5 P 31 T 6 G 6. F S 15 F 5 V D A 676 C 363 X R 57 U G 117 DIN EM G 6 V E 759 Y D H W 5 B 396 Model H Number S Designation Wetted Construction Non H Wetted Construction 390 T 165 Elastomers DIA W 5 Model F Number N Z DIA E J T J XPS/AAAAA/BNS/BN/BN/001 6 X Aluminium 79 C J X Aluminium 161 U 79 1 DIA (MM) Buna (Nitrile) G 117 P XP F 5 A K L V 659 DIA R K U XPS/WWAAA/NES/NE/NE/ K 339 Y 396 Y 396 D H 390 Cast Iron Aluminium Neoprene G 6 L 0-15 XP V 659 L Z DIA Z B 159 DIA M 330 J E 161 S XPS/SSAAA/TWS/TF/STF/001 Stainless Steel Aluminium (Full flow Teflon with Wilflex/ Santoprene back up) H 36 M 315 C 396 N K 33 X T 6 W 5 M 315 F D 676 P 35 U 51 J X 79 G V E K 339 PS15-76mm (3 ) Original Series Pumps 759 R 37 Y 396 PS1500- H 76m W 5 F S 15 L 659 Z 15 DIA J signation X 79 G 117 DIN Wetted Construction Non Wetted Construction Elastomers Model Number Designation Wetted Construction Non Wetted Construction Y 396 Model M Number 315 Full Designation Wetted ConstructionH Non 390 Wetted Construction T 165 DIA Elastomers. K /BNS/BN/BN/001 Aluminium Aluminium Buna (Nitrile) Z 15 DIA J XPS00/AAAAA/ZWS/WF/WF U 1 DIA Aluminium Aluminium 0-19 XPS/AAAAA/BNS/BN/BN/001 Model Number Designation Aluminium A/NES/NE/NE/001 Cast Iron Aluminium Neoprene Wetted Construction Non Aluminium Wetted Construction Elastomers Buna (Nitrile) K 33 V 0-15 XPS00/AAAAA/TWS/TF/ATF DIA Model Number (MM) A 51 N 319 Aluminium Aluminium 0-19 XPS/AAAAA/BNS/BN/BN/001 Aluminium Buna (Nitrile) A 615 /TWS/TF/STF/ Stainless Steel XPS/WWAAA/NES/NE/NE/001 Aluminium B 61 (Full flow Teflon P with Cast Wilflex/ 307 Iron Santoprene back up) Aluminium XPS00/SSAAA/BNS/BN/BN Neoprene Stainless Steel Aluminium B 17 C XPS/WWAAA/NES/NE/NE/001 R Cast Iron Aluminium Neoprene 57 C D XPS/SSAAA/TWS/TF/STF/001 S 1 Stainless Steel (Full flow Teflon with Wilflex/ Santoprene back up) D 93 Original Series (Full flow Teflon with Pumps XPS/SSAAA/TWS/TF/STF/001 Stainless Steel E 16 PS1500- Aluminium 76mm (3 ) Advanced Series Pumps T 16 Wilflex/ Santoprene back up) E 31 F 70 U 71 Model Number F 165 PS15- Designation G 76mm 3 (3 ) Original Wetted Construction ion Wetted Construction Non Wetted Construction Elastomers V Series 7 Pumps Non Wetted Construction Elastomers. PS1500- Model Number 76 H 399 Model Number Designation Wetted Construction Non Wetted Construction G XPS/AAAAA/BNS/BN/BN/001 W Aluminium 30 Aluminium /BN/BN/001 Buna (Nitrile) H Aluminium Aluminium J 9 Buna (Nitrile) X XPS00/AAAAA/ZWS/WF/WF (MM) Aluminium Aluminium J 11 /NE/NE/001 N 319 Cast Iron XPS/WWAAA/NES/NE/NE/001 Aluminium K 19. Y Neoprene Cast Iron 305 Aluminium Neoprene PS15-76mm (3 ) 0-15 A XPS00/AAAAA/TWS/TF/ATF 615 L 709 L 5 Aluminium Aluminium K 3 /TF/STF/001 P Original Series Z 0-15 Dimens 0 Stainless Steel XPS/SSAAA/TWS/TF/STF/001 Aluminium (Full flow Teflon with Wilflex/ Santoprene back up) B 17 M 363 M 7 Stainless Steel Aluminium XPS00/SSAAA/BNS/BN/BN (Full flow Teflon with Wilflex/ Stainless Santoprene Steel back up) Aluminium (MM R 57 AA A 16 DIA N 319 C 551 N 307 A 615 S 1 B 61 P 307 D 93 P 59 B 17 ginal T Series 16 Pumps C 16 PS15-76mm (3 ) Original Series R Pumps 57 PS1500- E 76mm 31 (3 ) Advanced Performance R Series Pumps Curve C 551 U 71 D 75 PS1500- S 1 F 165 S 1 D 93 V 7 E 16 T 16 G 533 DIN E 3 W 30 F 70. U 71 H T 0 DIA F 165 EM X 3 G 3 A V 51 7 N 319 J 11. U 1 DIA Y 305 H 399 (MM) G 533 W 30 K N 3 V 1 DIA Z A 615 L 709 H Model J B 61 P 307 Di Number 9 Designation X 3 Wetted Construction Non Wetted Construction Elastomers Model Number P AA DIA K 19 C 16 R B M 363 J 11 A R N XPS15/AAAAA/BNS/BN/BN/ Y 305 Aluminium C Aluminium 551 N 307 Buna (Nitrile) XP K A 3 L 5 D Z 75 0 S 1 B 61 S XPS15/SSAAA/TWS/TF/STF/001 Stainless Steel D Aluminium 93 P (Full flow 59 Teflon with Wilflex/ Santoprene back up) XP M P B DIA T 16 C 16 E 31 R 15-1 R E 16 XPS15/WWAAA/NES/NE/NE/ T 16 Cast Iron Aluminium Neoprene C XP U 71 D 75 S 1 F 70 U F S 1 D V 7 E 16 G 533 DIN W T G 3 V 7 E H T 0 DIA X 3 F 70 U 71 H 399 W 30 J 11 U 1 DIA F Y 305 G 3 V 7 J 9 X signation Wetted Construction Non Wetted Construction Elastomers K Model Number 33 Designation V 1 DIA Wetted Construction Non Wetted Construction Z 0 H 399 G W 30 K 19 AA A/BNS/BN/BN/ DIA Y Aluminium Aluminium Buna (Nitrile) XPS1500/AAAAA/NES/NE/NE Aluminium Aluminium H J 9 X 3 Model Number Designation L 5 Wetted Construction Non A/TWS/TF/STF/001 Stainless Steel Aluminium (Full flow Teflon with Wilflex/ Santoprene back up) Wetted Construction XPS1500/AAAAA/FWS/WF/WF Elastomers Model Number K 19 Z 0 Aluminium Aluminium J Y XPS15/AAAAA/BNS/BN/BN/001 Aluminium AA/NES/NE/NE/001 Cast Iron Aluminium Neoprene Aluminium XPS1500/SSAAA/TWS/TF/STF Buna (Nitrile) L 5 M 7 Z 0 AA 16 DIA Stainless Steel Aluminium K XPS15/SSAAA/TWS/TF/STF/001 Stainless Steel Aluminium (Full flow Teflon with Wilflex/ Santoprene back up) M 7 AA 16 DIA 15-1 XPS15/WWAAA/NES/NE/NE/001 Cast Iron Aluminium Neoprene Model Number Full Designation Wetted Construction Non Wetted Construction Elastomers XPS15/AAAAA/BNS/BN/BN/001 Aluminium Model Number Aluminium Designation Wetted Buna Construction (Nitrile) Non Wetted Construction XPS1500/AAAAA/NES/NE/NE Aluminium (Full flow Teflon with Aluminium XPS15/SSAAA/TWS/TF/STF/001 Stainless Steel Aluminium XPS1500/AAAAA/FWS/WF/WF Wilflex/ Aluminium Santoprene back Aluminium up) XPS1500/SSAAA/TWS/TF/STF Stainless Steel Aluminium 15-1 XPS15/WWAAA/NES/NE/NE/001 Cast Iron Aluminium Neoprene Model Number Designation Wetted Construction Non Wetted Construction Elastomers Model Number XPS15/AAAAA/BNS/BN/BN/001 Aluminium Aluminium Buna (Nitrile) XPS15/SSAAA/TWS/TF/STF/001 COMPLETE Stainless PACKAGED Steel PUMP Aluminium SOLUTIONS (Full flow Teflon with Wilflex/ Santoprene back up) XPS15/WWAAA/NES/NE/NE/001 Cast Iron Aluminium Neoprene tion Wetted Construction Non Wetted Construction Elastomers S/BN/BN/001 Aluminium Aluminium Buna (Nitrile) S/TF/STF/001 Stainless Steel Aluminium (Full flow Teflon with Wilflex/ Santoprene back up) S/NE/NE/001 Cast Iron Aluminium Neoprene L 6 M N 150 P 17 Performance Curve PS0-3mm

26 PS0-3mm (1 ½ ) - Advanced Series PS0-3mm (1 ½ ) Advanced Series Pump PS0-3mm (1 ½ ) Advanced Series Pump A 33 B 79 C 339 ) Advanced Series Pump (MM) A 33 L D B 79 M E 59 C 339 (MM) N 6 F 1 A D L P E 59 R G DIN B 79 M M F 1 S C 339 N H 6 T 150 DIA G 31 DIN 51 PS0- D 531 3mm (1 ½ ) Advanced H P J T Series Pump U 1 DIA 150 DIA E 59 R K V 1 DIA J 13 U 1 DIA 6 F 1 S K 30 V 1 DIA 15 G 31 DIN ) Advanced 170 Series Pump H T 150 DIA J 13 U 1 DIA DIN Elastomers K 30 V 1 DIA 150 DIA Model Number (MM) Designation Model Number Full Designation Wetted Wetted Construction Non Non Wetted Wetted Construction Construction Elastomers 1 DIA Buna (Nitrile) A 33 L XPS0/AAAAA/WFS/WF/WF Aluminium Aluminium Wilflex (Santoprene) 1 DIA Neoprene XPS0/AAAAA/WFS/WF/WF B 79 M Aluminium Aluminium Wilflex (Santoprene) XPS0/AAAAA/TWS/TF/ATF Aluminium Aluminium (Full flow Teflon with Wilflex/ Santoprene back up) C 339 N 6 lastomers (Full flow Teflon with Wilflex/ Santoprene back up) L 51 Model Number D Designation XPS0/SSSAA/BNS/BN/BN P 15 Stainless Steel Buna (Nitrile) XPS0/AAAAA/TWS/TF/ATF Aluminium Wetted Construction Non Wetted Aluminium Construction Elastomers una M (Nitrile) E 59 R XPS0/AAAAA/WFS/WF/WF Aluminium Aluminium Wilflex (Santoprene) tion N 6 Wetted Construction Non Wetted F Construction 1 S Elastomers Neoprene P XPS0/SSSAA/BNS/BN/BN G XPS0/AAAAA/TWS/TF/ATF 31 DIN Stainless Aluminium Steel Aluminium (Full flow Teflon with Wilflex/ Buna Santoprene (Nitrile) back up) /WFS/WF/WF with Aluminium Aluminium Wilflex (Santoprene) R Wilflex/ Santoprene 170 back up) H PS00- XPS0/SSSAA/BNS/BN/BN T 50mm Advanced 150 DIA Stainless Series Steel Pumps Aluminium Buna (Nitrile) /TWS/TF/ATF S Aluminium J Aluminium 13 (Full flow U Teflon with 1 Wilflex/ DIA Santoprene back up) /BNS/BN/BN DIN Stainless Steel K Aluminium 30 V Buna 1 (Nitrile) DIA T 150 PS00-50mm DIA. (") - Advanced Series U 1 DIA V 1 DIA PS00-50mm Advanced Series Pumps (MM) vanced Elastomers Series Pumps Model Number A 39 Designation L 659 Wetted Construction Non Wetted Construction Performance Elastomers Curve Buna (Nitrile) B XPS0/AAAAA/WFS/WF/WF 9 M 330 Aluminium Aluminium Wilflex (Santoprene) gnation Wetted Construction Non Wetted C Construction 396 N Neoprene Elastomers XPS0/AAAAA/TWS/TF/ATF Aluminium Aluminium (Full flow Teflon with Wilflex/ Santoprene back up) D 676 P 35 AA/WFS/WF/WF eflon with Wilflex/ Santoprene Aluminium back up) Aluminium A Wilflex (Santoprene) 39 L E XPS0/SSSAA/BNS/BN/BN 759 R 37 Stainless Steel Aluminium Buna (Nitrile) AA/TWS/TF/ATF M Aluminium Aluminium (MM) F (Full flow S BTeflon with Wilflex/ 15 9 Santoprene back up) M 330 A 39 L 659 AA/BNS/BN/BN Stainless Steel Aluminium G 117 C DIN Buna (Nitrile) 396 N B 9 M 330 H 390 T 165 DIA 330 C D 676 J N U 5 P 35 1 DIA 5 D K P E V DIA R PS00-50mm Advanced Series Pumps E 759 R F 37 S dvanced Series Pumps F S 15 G DIN. G 117 DIN DIN H 390 T 165 DIA H 390 T 165 DIA 165 DIA J 161 U J 1 DIA 161 U 1 DIA 1 DIA K 33 V K DIA DIA 33 Elastomers (MM) Model Number Designation V DIA Wetted Construction Non Wetted Construction Elastomers A 39 L 659 Buna (Nitrile) XPS00/AAAAA/ZWS/WF/WF Aluminium Aluminium Wilflex (Santoprene) L 659 B 9 M 330 Neoprene M 330 C XPS00/AAAAA/TWS/TF/ATF N 5 Aluminium Aluminium (Full flow Teflon with Wilflex/ Santoprene back up) E (Full N flow Teflon 5 with Wilflex/ Santoprene back up) D XPS00/SSAAA/BNS/BN/BN P 35 Stainless Steel Aluminium Buna (Nitrile) P 35 E 759 R 37 R 37 tion lastomers Wetted Construction Non Wetted F PS1500- Construction 76mm (3 ) S Advanced Elastomers 15 Series Pumps S 15 Model Number Designation Wetted Construction Non Wetted Construction Elastomers G 117 DIN /ZWS/WF/WF una (Nitrile) DIN Aluminium H Aluminium XPS00/AAAAA/ZWS/WF/WF 390 T Wilflex (Santoprene) 165 DIA Aluminium Aluminium Wilflex (Santoprene) T 165 DIA /TWS/TF/ATF Neoprene Model Aluminium Number Full J. Aluminium Designation 161 (Full flow U Teflon with 1 Wetted Wilflex/ DIA Santoprene Construction back up) Non Wetted Construction Elastomers U 1 DIA 0-15 XPS00/AAAAA/TWS/TF/ATF Aluminium Aluminium (Full flow Teflon with Wilflex/ Santoprene back up) /BNS/BN/BN with V Wilflex/ Santoprene DIA Stainless back up) Steel K Aluminium 33 V (MM) Buna (Nitrile) DIA XPS00/AAAAA/ZWS/WF/WF XPS00/SSAAA/BNS/BN/BN Aluminium Stainless Steel Aluminium Aluminium Buna (Nitrile) Wilflex (Santoprene) A 615 L 709 Advanced Series Pumps B 17 M PS1500- XPS00/AAAAA/TWS/TF/ATF 76mm C (3 ) 551 Advanced Aluminium N Series 307 Pumps Aluminium D 93 P E 31 R. XPS00/SSAAA/BNS/BN/BN Stainless Steel Aluminium Buna (Nitrile) M F 165 S 1 gnation Elastomers Wetted Construction Non Wetted G Construction 533 DIN Elastomers 709 Model Number Designation Wetted Construction Non Wetted Construction Elastomers H (MM) T 0 DIA AA/ZWS/WF/WF Buna (Nitrile) 363 Aluminium Aluminium Wilflex (Santoprene) A J 615 XPS00/AAAAA/ZWS/WF/WF 11 L U 709 Aluminium Aluminium Wilflex (Santoprene) 1 DIA AA/TWS/TF/ATF Neoprene 307 Aluminium B Aluminium K 17 3 M (Full flow V Teflon 363 with Wilflex/ 1 DIA Santoprene back up) PS mm 0-15 (3 ) XPS00/AAAAA/TWS/TF/ATF - Advanced Series Aluminium Aluminium (Full flow Teflon with Wilflex/ Santoprene back up) 59 eflon AA/BNS/BN/BN with Wilflex/ Santoprene Stainless back Steel up) C Aluminium 551 N 307 Buna (Nitrile) XPS00/SSAAA/BNS/BN/BN Stainless Steel Aluminium Buna (Nitrile) D 93 P 59 1 ) Advanced DIN Series Pumps E 31 R PS1500- F 16576mm (3 ) S Advanced 1 Series Pumps Performance Curve 0 DIA G 533 DIN 1 DIA 1 DIA H T 0 DIA. J 11 U 1 DIA ç 615 L 709 K 3 V 1 DIA L 709 (MM) B 17 M 363 Elastomers Model Number Designation Wetted Construction M Non Wetted 363Construction Elastomers A 615 L 709 N 307 Buna (Nitrile) XPS1500/AAAAA/NES/NE/NE C 551 Aluminium N 307 Aluminium Neoprene B 17 M 363 P 59 E (Full flow Teflon with Wilflex/ Santoprene back up) C XPS1500/AAAAA/FWS/WF/WF D 93 N 307 Aluminium P 59 Aluminium Wilflex (Santoprene Sanitary grade) R D S 1 Neoprene XPS1500/SSAAA/TWS/TF/STF P E Stainless Steel R Aluminium (Full flow Teflon with Wilflex/ Santoprene back up) E 31 R F 165 S 1 DIN F 165 S G tion T 0 DIA Wetted Construction Non Wetted Construction Elastomers DIN /NES/NE/NE U 1 DIA G 533 DIN Aluminium H Aluminium H T Neoprene T 0 DIA 0 DIA V 1 DIA /FWS/WF/WF Elastomers Aluminium Model Number J Aluminium 11 Designation Wilflex U (Santoprene J 1 DIA Sanitary 11 Wetted grade) Construction UNon Wetted Construction 1 DIA Elastomers /TWS/TF/STF Stainless Steel Aluminium (Full flow Teflon with Wilflex/ Santoprene back up) Buna (Nitrile) K XPS1500/AAAAA/NES/NE/NE 3 V K 1 DIA 3 V 1 DIA Aluminium Aluminium Neoprene with Wilflex/ Santoprene back up) XPS1500/AAAAA/FWS/WF/WF Aluminium Aluminium Wilflex (Santoprene Sanitary grade) Neoprene XPS1500/SSAAA/TWS/TF/STF Stainless Steel Aluminium (Full flow Teflon with Wilflex/ Santoprene back up) gnation Wetted Construction Non Wetted Construction Elastomers AAA/NES/NE/NE Aluminium Aluminium Neoprene PRO-FLO L 51 M N 6 P 15 R 170 S AA/FWS/WF/WF Elastomers Aluminium Model Number Aluminium Designation Wilflex (Santoprene Sanitary Wetted grade) Construction Non Wetted Construction Elastomers AA/TWS/TF/STF Buna (Nitrile) Stainless Steel Aluminium (Full flow Teflon with Wilflex/ Santoprene back up) XPS1500/SSAAA/TWS/TF/STF XPS1500/AAAAA/NES/NE/NE Stainless Steel Aluminium Aluminium Neoprene Teflon with Wilflex/ Santoprene back up) XPS1500/AAAAA/FWS/WF/WF Aluminium Aluminium Wilflex (Santoprene Sanitary grade) Neoprene XPS1500/SSAAA/TWS/TF/STF Stainless Steel Aluminium (Full flow Teflon with Wilflex/ Santoprene back up) 1300 ALLPUMPS (55 76) Performance Curve (Full flow Teflon with Wilflex/ Santoprene back up) (Full flow Teflon with Wilflex/ Santoprene back up) Model Number Full Designation Wetted Construction Non Wetted Construction Elastomers XPS1500/AAAAA/NES/NE/NE Aluminium Aluminium Neoprene Wilflex (Santoprene Sanitary XPS1500/AAAAA/FWS/WF/WF Aluminium Aluminium grade) (Full flow Teflon with Wilflex/ Santoprene back up) 6

27 7 Mining Series Pumps Stallion Solids Hangling Pumps The stallion pump series can handle what miners demand: durability, portability and ease of maintenance. The stallion pump is designed to transfer solid-laden slurries safely and effectively. Large internal clearance and flow-through design keep the pump from clogging while Wilden's patented air distribution systems maintains ON/OFF reliability Features Large solids to 5mm (1") Collapsible handles Shock absorbing base Intrinsically safe operation Screen base models PX 3mm (1 1/ ") METAL STALLION PX 50mm (") METAL STALLION PX15 76mm (3") METAL STALLION PUMP MODEL AIR SYSTEM CONSTRUCTION ELASTOMERS CONNECTIONS T/PKPPB/NES/NE/PBN/00 TURBO-FLO POLYPROPYLENE NEOPRENE 1 ANSI FLANGE P/PWSPP/NEU/NE/PBN PRO-FLO POLYPROPYLENE NEOPRENE 1 1/ ANSI FLANGE T/PWPPB/NEU/NE/PBN TURBO-FLO POLYPROPYLENE NEOPRENE 1 1/ ANSI FLANGE P/WWLLL/NEU/NE/NE/011 PRO-FLO CAST IRON NEOPRENE 1 1/ BSPT (F) T/WWPPB/NEU/NE/NE0 TURBO-FLO CAST IRON NEOPRENE 1 1/ BSPT (F) P/PKWPP/NEU/NE/PBN PRO-FLO POLYPROPYLENE NEOPRENE ANSI FLANGE T/PKWPB/NEU/NE/PBN TURBO-FLO POLYPROPYLENE NEOPRENE ANSI FLANGE P/WWWPP/NEU/NE/NE/011 PRO-FLO CAST IRON NEOPRENE BSPT (F) T/WWWPB/NEU/NE/NE/011 TURBO-FLO CAST IRON NEOPRENE BSPT (F) T15/WWWPB/NEU/NE/NE006 TURBO-FLO CAST IRON NEOPRENE 3 BSPT (F) T/WWWPB/NEU/PU/PEP TURBO-FLO CAST IRON NEOPRENE ANSI FLANGE COMPLETE PACKAGED PUMP SOLUTIONS

28 FITTED TR PLASTIC PUMP Mining Series Pumps FITTED P Metal Pump FITTED P METAL PUMP FITTED T PLASTIC PUMP FITTED T PLASTIC PUMP FITTED T METAL PUMP FITTED P METAL PUMP FITTED T15 METAL PUMP FITTED T METAL PUMP 1300 ALLPUMPS (55 76)

29 9 High Pressure Pumps Wilden's Brahma Flap Valve pump is designed for maximum solids passage. Its enhanced durability, rugged design and outstanding performance make Brahma the right choice for the toughest applications out there. The Brahma is available in two air distribution system (ADS) options: the rugged and reliable Turbo-Flo and the revolutionary Pro-Flo X. PX 51mm (") METAL PX15 76mm (3") METAL COMPLETE PACKAGED PUMP SOLUTIONS

30 Mining Series Pumps 30 Wilden s high pressure product line was designed to reliably transfer viscous, solid-laden slurries at high head pressures. These air-operated, diaphragm pumps are available with simplex or duplex technology to generate 17. bar (50 psig). The simplex creates a :1 pressure ratio while the duplex creates a 3:1 pressure ratio. Wilden high pressure pumps do not require costly external boosters or amplifiers to achieve this pressure output. Our powerful solutions will create profitable results in your application. H0 5mm (1") METAL HX0S 5mm (1 1/ ") ALUMINUM HX0S 3mm (1 1/ ") STAINLESS STEEL H00 51mm (") ALUMINUM H1500HS 76mm (3") STAINLESS STEEL 1300 ALLPUMPS (55 76)

31 31 Hygienic/Saniflo Pumps The Saniflo Series pump line is specifically designed to meet the strict guidelines established for sanitary process applications. Saniflo pumps incorporate a straight flowthrough design, large solids passage and efficiencies to insure process success. Saniflo pumps have a shear sensitive operation, Tri-clamp style fittings and are offered in various surface finishes. The Saniflo pump line also offers pumps that are CIP (clean in place) and COP (clean out of place) for ease of use and maintenance. Hygienic Series FEATURES TECHNICAL DATA Wilden is consistently meeting and exceeding industry standards by having the certifications needed (FDA, USDA, 3A, ATEX) in order to help refine your process. Saniflo Series Pumps are used in the Food and Beverage and Biopharmaceutical industries. Pro-Flo X ADS Sanitary & Hygienic applications Delicate/shear sensitive product handling Integral piston diaphragm options Multiple sanitary elastomers available Superior product containment Swivel stand available CIP (Clean In Place) Multiple certification levels available Certifications: EHEDG, 3-A, ATEX, CE, USP Class VI, FDA Offset valve housing for easy alignment Sizes available 5mm (1 ) through to 76mm (3 ) 316L Stainless Steel wetted components Contact surfaces with Ra 0.μm (3μ-in) Valve options available: ball, mushroom, flap Tri-clamp style connections PERFORMANCE DATA Max flow rates 7lpm (31gpm) (Valve ball style) Max suction lift: Dry: 5.5m (19. ), Wet: 9.3m (30.6 ) (Valve ball style) Max size solids: 76mm (3 ) (Flap valve style not available in 5mm (1 ) models) COMPLETE PACKAGED PUMP SOLUTIONS

32 Hygienic/Saniflo Pumps 3 Saniflo Series FEATURES Pro-Flo, Pro-Flo X and Accu-Flo ADS available For sanitary applications Multiple sanitary FDA elastomers available Shear sensitive Intrinsically safe options Certifications: FDA, CE, ATEX TECHNICAL DATA Sizes available: 13mm (1/ ) through 76mm (3 ) 316L Stainless Steel wetted components Tri-clamp style connections PERFORMANCE DATA Max flow rate: 9lpm (3gpm) Max suction lift: Dry: 7.6m (5.0 ), Wet: 9.5m (31. ) Max size solids: 76mm (3 ) (Flap valve style not available in 5mm (1 ) models) Max solids size: 9.5mm (3/ ) 1300 ALLPUMPS (55 76)

33 33 Original series - SURGE DAMPENERS The SD Equalizer was designed to remove pressure variation on the discharge end of the pump. It has a flow-through design manufactured with existing Wilden pump parts. The SD series automatically sets and maintains the correct air pressure required, optimising its effectiveness. Features and Benefits: Reduces pipe vibration and shaking Protects in-line equipment Reduces water hammer Absorbs acceleration head Lowers system maintenance cost Suction stabiliser Prevents leaking at pipe fittings and joints Extends and improves pump performance Avoids damaging pressure surges Wide range of material and elastomer options Common parts with Wilden pumps Self adjusts to system pressure AVAilable sizes Materials of Construction: Wetted Housing 13 mm (1/") Aluminum Aluminum Air Distribution System 5 mm (1") 316 Stainless Steel 316 Stainless Steel 3 mm (1-1/") Ductile Iron -coated Ductile Iron 51 mm (") Polypropylene Polypropylene 76 mm (3") PVDF Glass-filled Polypropylene Mild Steel -coated APCO Level Controller Control Pumps In Sumps as shallow as 1 Fill Overhead Tanks Control Pinch Valves, Cylinders and Other Pneumatic Equipment Packaged Systems Available Model #R For Deep Sumps and Tank Filling Model # For Shallow Sumps and Submerged Pump Applications ENERGY SAVING Reliable On-Off control of air driven pumps conserves costly compressed air and saves pumps parts NON BUBBLING Design eliminates constant hr/ day usage of instrument air reliable No moving parts in contact with the liquid being sensed - Thousands of units in use since 197 FLOATLESS Works in foamy gunky turbulent areas where other controls fail. Operates on any liquid that will rise and fall by gravity in the sensing tube non ELECTRIC No costly wiring - one trade installs and service EXPLOSION RESISTANT All pneumatic design allows use in hazardous areas FREQUENT CYCLING Pumps away suspended materials before they settle and harden COMPLETE PACKAGED PUMP SOLUTIONS

34 Original series -ACCESSORIES Wilden s accessory products add value to your liquid process and expand the application range of Wilden pumps by augmenting the performance and/or utility of the pump. Our electronic controllers automate your Wilden pump for batching and other electronically controlled dispensing applications. We can also create laminar process flow by eliminating pump pulsation, or control the liquid level within a system of process. WILDEN Wil-Gard The Wil-GardTM detects diaphragm failure at the source: the primary diaphragm, not at the air chamber or the air exhaust as other systems do. Sensors are located between the primary and back-up (containment) diaphragms When the sensors detect a conductive liquid, anaudible alarm, LED and an internal latching relay are activated Increase containment, reduce fugitive emissions and reduce downtime with -hour pump surveillance Power requirement:1vac, V AC or 9V DC battery WILDEN Pump Cycle Monitor The PCMI counts pump cycles by sensing the presence of the air valve piston (Turbo-Flo TM ) or air valve spool (Pro-Flo TM ). The sensor, located at the air valve and cap, detects the presence of a magnet located at the end of the air valve piston/spool The PCMI registers a complete pump cycle when the piston/spool shifts away from the sensor and subsequently returns to the original position The PCMI unit has a reset switch located on the face of the PCMI module PCMI has the ability to be reset from a remote location WILDEN Drum Pump Kit The inherent features of the Wilden air-operated pump and Accu-FloTM pump technology allow it to excel as a utilitarian drum pump. Various speed and pressure capability, the ability to run dry, self-prime and dead-head offers you flexibility at a low cost. The Wilden universal drum pump kit enables Wilden 6 mm (1/") and 13 mm (1/") pumps to adapt directly to drums for cost-effective, efficient liquid transfer. Universal kit for 6mm(1/") and 13mm(1/") pumps Fits 51mm(") NPT bung holes Tube length can be cut to length Variety of materials are available ALLPUMPS (55 76)

35 35 Almatec Maschinenbau GmbH is a premium manufacturer of air-operated double-diaphragm (AODD) pumps and a company which has successfully combined a worldwide presence with proximity to the end-user. Permanent product innovations and improvements have resulted in a large range of products and the opening up of new markets. Our extensive product range offers sophisticated and economical solutions for all of your applications. The standard-setting advantages of pneumatic (or air-operated) diaphragm pumps include protection against dry running and overloading, self-priming capability, infinitely control, easy start up, no rotating parts in the product stream, solid handling capability and gentle displacement. The quality requirements of our pumps is high. Solid design, Perswing P air control system, diaphragms and best-in-class materials are quality features demanded by our customers E-Series ALMATEC The E-Series represents the latest generation of plastic air-operated double diaphragm pumps made in solid design. A few of the advantages of this pump include: Further increased pump safety due to innovative ring-tightening structure Increased capacity Decreased air consumption Reduced noise level Optimized flow pattern Chemicor Particular attention has been paid to the form of the product chambers when designing the metal pneumatic diaphragm pumps from Almatec. CHEMICOR pumps with a centre block made of PE conductive meet the ATEX requirements of the directive 9/9/EG. Further features of series CHEMICOR include: Two vertical joint faces only No clamping bands but tie rods Freely rotating suction and discharge ports Compact solid design Patented maintenance-free air control system perswing without dead centre COMPLETE PACKAGED PUMP SOLUTIONS

36 BIOCOR The ALMATEC pump series BIOCOR is especially designed for sterile applications within the pharmaceutical, biotechnical and food industry. As demanded for in these applications all housing parts of the BIOCOR pumps have no horizontal areas and each pump comes with four ball lifting magnets, which magnetically lift the balls off their seats so the pump can be drained entirely without having to be dismounted. The three pump sizes B, B 3 and B achieve max. capacities of 3.5/7.5/17 m³/h (15./33/75 gpm) respectively and a max. discharge pressure of up to 7 bar (0 psig). The wetted housing parts are electro polished 316 L stainless steel with a surface roughness of 0. μm, and the centre block is made of conductive polyethylene. Some of the features of the BIOCOR series include: Built in accordance to the essential specifications (EHEDG, 3-A, FDA, Class VI etc.) Integrated cleaning-system with high cleaning results CIP (clean in place) and SIP (sterilization in place) possible Sterile design: no horizontal areas Suction and discharge ports suitable for Tri-Clamp and other sanitary threads ALMATEC 36 FUTUR Since 19 ALMATEC has manufactured specialist pumps for the chemical supply and circulation in the semiconductor industry. The liquids handled in this industry set different demands to the pumps and the FUTUR series is available in a range of materials. The different pump sizes achieve max. capacities between and 0 l/min (.6-5 gpm). The pumps have a compact, simple design with few parts. The housing parts are machined from solid blocks, the basis for a long life time. Some of the many features of the FUTUR series include: Four materials (t, h, e, s) for the different applications No metal at all (t, h, e) Temperature range up to 0 c/390 f (h) Patented, contactless cascade sealing between the product chambers No o-ring sealing in wetted areas Straight-through flow pattern, only one wetted housing part Compact, simple design with few parts, very low space requirement 1300 ALLPUMPS (55 76)

37 37 AH ALMATEC ALMATEC's high-pressure diaphragm pumps made of plastic have been specially developed for charging filter presses with chemical wastes and special sludge. With a driving pressure of max. 7 bar (0 psig), the AH series of pumps build up a delivery pressure of 15 bar (1 psig) due to internal pressure boost. These genuine double-action pneumatic diaphragm pumps are available in three sizes with a maximum delivery volume of m³/h / 70 l/min / 1.5 gpm (AH 15), m³/h / 10 l/min / gpm (AH 5) and m³/h / 330 l/min / 7 gpm (AH ). All housing parts in contact with the product are made of PE UHMW which is seven times more resistant to abrasion than Polypropylene and is also more wear resistant than iron, aluminium and some steels. Some of the features of the series include: No control or safety elements required for safe operation over the entire range of capacity without over pressure Corrosion and abrasion proof housing Horizontal or vertical position for suction and discharge ports Price alternative to piston-actuated diaphragm pumps and progressive cavity pumps CX The CX series diaphragm pumps are used as general-purpose pumps for low to medium duty and also as drum pumps. They are used to empty containers down to the very last drop and can therefore be used for complete and unattended transfer of liquids from one container to another. The series comprises four pump sizes with maximum delivery volumes of,, 50 and 130 l/min (.6, 5.3, 13. and 3 gpm). The housings are made of solid PE conductive for the use in explosion-protected areas. Further features of series CX at a glance: With ball or cylinder valves Composite diaphragms with integrated metal core Metal free outer surface Variable position of suction and discharge port Handle recess with drainage COMPLETE PACKAGED PUMP SOLUTIONS

38 QUATTROFLOW Quattroflow's positive displacement pumps incorporate four piston-diaphragm technology, with no mechanical seals, that are driven by an eccentric shaft and electrical motor. Quattroflow products primarily serve the pharmaceutical and biotech industries that require reliability, product safety, purity and cleanability. The Quattroflow production program consists of four pump series: - QF 150: This pump series is the best entry for laboratories, research centers and universities - small, portable, quiet and scalable. - QF : A versatile tool for many applications in laboratories, pilot and production plants worldwide. Stainless steel valve plate and new diaphragms allow inline steaming, autoclaving and easy cleaning. ALMATEC 3 - QF 0: The QF-0 Series is used in mid-sized crossflow systems and in chromatography systems, where gradient mixing requires a 0:1 turndown ratio. - QF K: The biggest Quattroflow pump with a max. capacity of 000 l/h meets the requirements of high process volumes. The pump series 150, and 0 are also available in a "single use" version with product chambers made of plastic. The main focus is the demand of the users for prevention of expensive and time-consuming flushing. Options A variety of optional equipment is available to allow for a precise set-up to your specific application. Pulsation Damper If a virtually uniform flow is needed, pulsation dampers in different versions are available. Pump series: E-SERIES, CHEMICOR, BIOCOR, FUTUR Barrier Chamber System The ALMATEC barrier chamber system meets high safety requirements. The individual diaphragm is replaced by two diaphragms arranged in tandem with a barrier chamber of conductive PE between them and filled with non-conductive liquid. A change in conductivity of the barrier liquid is detected by sensors and signalled to a controller, which triggers an alarm or disconnects the pump. Pump series: E-SERIES, CHEMICOR, BIOCOR Stroke Counting ALMATEC air-operated diaphragm pumps can be used continuously (h operation) or intermittently for hours, minutes or for an exact defined number of strokes. To accurately count the strokes a sensor can be installed in the pump's center housing (available as pneumatic version also). Pump series: E-SERIES, CHEMICOR, BIOCOR, AH, FUTUR Diaphragm Monitoring A capacitive sensor installed in the pump muffler detects the presence of liquids and in case of a diaphragm rupture it relays a corresponding signal to a controller that triggers an alarm or disconnects the pump via a connected solenoid valve. Pump series: E-SERIES, CHEMICOR, BIOCOR, AH, FUTUR Flange Connection According to recognized industry safety standards, all E-SERIES pump sizes from E 15 to E 0 can be equipped with thread bushings and flange-o-rings for flange connections to DIN or ANSI / PN. Pump series: E-SERIES Draining System The E-SERIES pumps in sizes 15 to 50 are available with a special ALMATEC draining system consisting of a bypass system in the side housings that can be activated easily either via hand-operated valves or pneumatically. In this way, the pump and piping can be drained without having to be dismounted. The amount of cleaning agent and solvent required when changing products is reduced considerably and this greatly reduces environmental pollution. Pump series: E-SERIES 1300 ALLPUMPS (55 76)