3M Mini D Ribbon (MDR) Connectors.050 Surfacemount Vertical Receptacle - Shielded 102 Series
|
|
- Philomena Bishop
- 6 years ago
- Views:
Transcription
1 M Mini D Ribbon (MDR) Connectors Wiper-on-wiper contact for reliable repetitive plugging Interface latch design for connection stability I 1284C Interface as a 6 contact connector Contacts: 20, 26 and 6 See Regulatory Information Appendix (RIA) for chemical compliance information. Date Modified: February 21, 2007 TS Sheet 1 of Physical lectrical Insulation Material: Glass Reinforced Polyester (PCT) Flammability: UL 94V-0 Color: Beige Contact Material: Copper Alloy Plating Underplating: 80 μ [ 2.0 μm ] Nickel Wiping Area: 20 μ [ 0.50 μm ] Min Gold Solder Tails: See Ordering Information Body Material: Zinc Alloy Plating: Nickel Shroud Material: Steel Plating: Nickel Marking: M Logo and Part Number Current Rating: 1 A Insulation Resistance: > Ω at 500 V DC Withstanding Voltage: 500 V RMS for 1 Minute nvironmental Temperature Rating: -55 C to +105 C Process Rating: 260 C (profile per J-STD-020C) UL File No.: M is a trademark of M Company
2 M Mini D Ribbon (MDR) Connectors Pos. A B C D [.40] [22.2] [27.45] 0.65 [16.41] [11.4] [7.21] [26.1] 1.21 [1.26] 0.80 [20.22] [15.24] [4.56] [2.48] [7.61] 1.05 [26.57] [21.59] A C.14 [.5 ] 2X Positioning Boss.005 [ 0.1 ].2 [ 5.8 ].016 [ 0.4 ] B.08 [ 2.1 ].06 [ 1.5 ].061 [ 1.55 ].20 [ 5.2 ] 2X 0.18 [.5 ] D.14 [.5 ].285 [ 7.24 ] Position 2 Position 1 PCB Lockdown Thread.6 [ 9.1 ].40 [ 10.1 ] Inch [mm] Last Position Note: 1. Solder tail tips are formed away from board, so tip dimension is greater than footprint total width [ 6. ] Position 0 Tolerance Unless Noted inch ±.1 ±.01 ±.005 [ ] Dimensions for Reference Only Ordering Information Contact Quantity Panel / Board Retention Feature: 0 = M2.6 (special order) 1 = M2.5 (standard - See note 2) 102XX-22X0X Solder Tail Plating: V = Tin-Lead over nickel (RIA & C2 Apply) P = Gold flash over nickel (RIA 1 & C1 Apply) Note: 2. When using the M Jacksocket 41-1 and CameraLink cable assembly, the M connector part number is V. TS Sheet 2 of M is a trademark of M Company
3 M Mini D Ribbon (MDR) Connectors Recommended Board Layout View from Connector Side See Dim Table on previous page A B Position [ 2.0 ].028 [ 0.70 ] Position 1 PCB Lockdown Hole 2X.110 ±.00 [ 2.80 ].177 [ 4.50 ].091 [ 2.0 ] Last Position.18 [.50 ] Positioning Boss Hole 2X.087 ±.00 [ 2.20 ] Position Pos. A B C D [27.45] [22.2] 0.94 [2.80] 1.08 [27.45] [11.4] [1.26] [26.1] 1.09 [27.61] 1.2 [1.26] [15.24] [7.61] [2.48] 1.4 [.96] 1.48 [7.61] [21.59] Recommended Panel Cut-Out See Dim table on previous page Inch [mm] Tolerance Unless Noted inch ±.1 ±.01 ±.005 [ ] Dimensions for Reference Only R.060 [ 1.5 ].19 ±.004 [ 8.1 ] C D Note: Panel Thickness.079 [ 2.00 ] Max. TS Sheet of M is a trademark of M Company
4 Regulatory Information Appendix M lectronic Solutions Division/Interconnect UROP Appendix 1: uropean Union RoHS Directive 2002/95/C, Restriction of the Use of Certain Hazardous Substances in lectrical & lectronic quipment, as amended by U Commission Decision 2005/618/C. This product is RoHS Compliant 2005/95/C. RoHS Compliant 2005/95/C means that the product or part ( Product ) does not contain any of the substances in excess of the maximum concentration values in U Directive 2002/95/C, as amended by Commission Decision 2005/618/ C, unless the substance is in an application that is exempt under U RoHS. Unless otherwise stated by M in writing, this information represents M s best knowledge and belief based upon information provided by third party suppliers to M. Appendix 2: uropean Union RoHS Directive 2002/95/C, Restriction of the Use of Certain Hazardous Substances in lectrical & lectronic quipment, as amended by U Commission Decision 2005/618/C This product contains lead in the compliant pin area in excess of the maximum concentration value allowed but is compliant by exemption under U Commission Decision 2005/747/C. RoHS Compliant 2005/95/C means that the product or part ( Product ) does not contain any of the substances in excess of the maximum concentration values in U Directive 2002/95/C, as amended by Commission Decision 2005/618/ C, unless the substance is in an application that is exempt under U RoHS. Unless otherwise stated by M in writing, this information represents M s best knowledge and belief based upon information provided by third party suppliers to M. Appendix : uropean Union RoHS Directive 2002/95/C, Restriction of the Use of Certain Hazardous Substances in lectrical & lectronic quipment as amended by Commission Decision 2005/618/C. This product contains lead in the solder tail area in excess of the maximum concentration value allowed. Unless otherwise stated by M in writing, this information represents M s best knowledge and belief based upon information provided by third party suppliers to M. Appendix 4: uropean Union RoHS Directive 2002/95/C, Restriction of the Use of Certain Hazardous Substances in lectrical & lectronic quipment, as amended by U Commission Decision 2005/618/C. This product contains decabd in the insulating material in excess of the maximum concentration value allowed but is compliant by exemption under U Commission Decision 2005/17/C. RoHS Compliant 2005/95/C means that the product or part ( Product ) does not contain any of the substances in excess of the maximum concentration values in U Directive 2002/95/C, as amended by Commission Decision 2005/618/C, unless the substance is in an application that is exempt under U RoHS. Unless otherwise stated by M in writing, this information represents M s best knowledge and belief based upon information provided by third party suppliers to M. RIA-2217-B
5 CHINA Appendix C1: China RoHS lectronic Industry Standard of the People s Republic of China, SJ/T , Requirements for Concentration Limits for Certain Hazardous Substances in lectronic Information Products. This symbol, per Marking for the Control of Pollution Caused by lectronic Information Products, SJ/T , means that the product or part does not contain any of the following substances in excess of the following maximum concentration values in any homogeneous material: (a) 0.1% (by weight) for lead, mercury, hexavalent chromium, polybrominated biphenyls or polybrominated diphenyl ethers; or (b) 0.01% (by weight) for cadmium. Unless otherwise stated by M in writing, this information represents M s best knowledge and belief based upon information provided by third party suppliers to M. 20 Appendix C2: China RoHS lectronic Industry Standard of the People s Republic of China, SJ/T , Requirements for Concentration Limits for Certain Hazardous Substances in lectronic Information Products. This symbol, per Marking for the Control of Pollution Caused by lectronic Information Products, SJ/T , means that the product or part does contain a substance, as detailed in the chart below, in excess of the following maximum concentration values in any homogeneous material: (a) 0.1% (by weight) for lead, mercury, hexavalent chromium, polybrominated biphenyls or polybrominated diphenyl ethers; or (b) 0.01% (by weight) for cadmium. Unless otherwise stated by M in writing, this information represents M s best knowledge and belief based upon information provided by third party suppliers to M. The numerical reference in the symbol above should not be construed as a representation regarding the product s life or an extension of a product warranty. The product warranty is stated below. In the event any product is proven not to conform with M s Regulatory Information Appendix, then M s entire liability and Buyer s exclusive remedy will be in accordance with the product Warranty stated below. Name and Content of Hazardous Substances or lements Important Notice All statements, technical information, and recommendations related to M s products are based on information believed to be reliable, but the accuracy or completeness is not guaranteed. Before using this product, you must evaluate it and determine if it is suitable for your intended application. You assume all risks and liability associated with such use. Any statements related to the product which are not contained in M s current publications, or any contrary statements contained on your purchase order shall have no force or effect unless expressly agreed upon, in writing, by an authorized officer of M. Warranty; Limited Remedy; Limited Liability. This product will be free from defects in material and manufacture for a period of one (1) year from the time of purchase. M MAKS NO OTHR WARRANTIS INCLUDING, BUT NOT LIMITD TO, ANY IMPLID WARRANTY OF MRCHANTABILITY OR FITNSS FOR A PARTICULAR PURPOS. If this product is defective within the warranty period stated above, your exclusive remedy shall be, at M s option, to replace or repair the M product or refund the purchase price of the M product. xcept where prohibited by law, M will not be liable for any indirect, special, incidental or consequential loss or damage arising from this M product, regardless of the legal theory asserted. lectronic Solutions Division 6801 River Place Blvd. Austin, TX / RIA-2217-B M 2007
3M Mini D Ribbon (MDR) Connectors.050 Boardmount Through-Hole Right Angle Receptacle - Shielded 102 Series
M Mini D Ribbon (MDR) Connectors.050 Boardmount Through-Hole Right Angle Receptacle - Shielded 102 Series Wiper-on-wiper contact for reliable repetitive plugging Surface mount compatible PCT insulator
More information3M Mini D Ribbon (MDR) Connectors.050 Surface Mount Right Angle Receptacle - Shielded 102 Series
3M Mini D Ribbon (MDR) Connectors.050 Surface Mount Right Angle Receptacle - Shielded 102 Series Wiper-on-wiper contact for reliable repetitive plugging Ultra-low signal skew for high data rate transmission
More information3M Mini D Ribbon (MDR) Connectors.050 Boardmount Through-Hole R. A. Condo Receptacle - Shielded 102 Series
M Mini D Ribbon (MDR) Connectors.050 oardmount Through-Hole R. A. Condo Receptacle - Shielded 102 Series Wiper-on-wiper contact for reliable repetitive plugging Rugged die cast metal case construction
More information3M Mini D Ribbon (MDR) Connectors.050 Boardmount Thru-Hole Right Angle Receptacle-Shielded 102 Series
3M Mini D Ribbon (MDR) Connectors.050 Boardmount Thru-Hole Right ngle Receptacle-Shielded 102 Series Wiper-on-wiper contact for reliable repetitive plugging Rugged die cast metal case construction SMT
More informationPhysical. Electrical. Environmental. Insulation: Contact: Plating: Shroud: Temperature Rating: -55 C to +85 C
M I/O Interconnect System 2.0 mm for IEEE 194 Right Angle, Horizontal, Through-Hole Plug (Male) E106 Series Robust ribbon style contact for reliable, repetitive plugging Body tabs provide lateral support
More information3M Shielded Compact Ribbon (SCR) Connectors Boardmount Right Angle Plug
M Shielded Compact Ribbon (SCR) Connectors Boardmount Right Angle Plug 61 Series Robust ribbon style contact for reliable, repetitive plugging Body tabs provide lateral support to solder joints and help
More informationPhysical. Electrical. Environmental. Insulation: Contact: Plating: Marking: 3M Logo, Part Identification Number and Orientation Triangle
3M Polarized Boardmount Socket.100.100 Centerbump Polarization with Right Angle Solder Tails 5100 Series Centerbump polarization Mates with standard low profile shrouded headers Part number on each piece
More information3M Link Connector.100" Boardmount, Straight and Right Angle 382 Series
3M Link Connector.100" Boardmount, Straight and Right Angle 382 Series Mates with 3M Wiremount Link Connector 38104 Vertical or right angle configuration Accepts latch mechanism of Wiremount Link Connector
More information3M Mini D Ribbon (MDR) Connectors.050 Boardmount Through-Hole Right Angle Plug - Shielded 101 Series
Boardmount Through-Hole Right ngle Plug - Shielded 101 Series Wiper-on-wiper contact for reliable repetitive plugging Rugged die cast metal case construction Screw or ground lock PCB retention Normal and
More information3M PCB Connector.100 Four Row 3400 Series
PCB Connector.00 Four Row 300 Series Low profile Standard staggered grid Variety of pin lengths and plating options available See Regulatory Information Appendix (RIA) for chemical compliance information
More information3M D Sub Socket 50 Position 8350 Series
M D Sub Socket 50 Position 850 Series IDC compatible Lower insertion/withdrawal force than other 50 position products Available in either open or closed end cover Mounting options include #4-40 UNC or
More informationDISCONTINUED. 3M PC Card Header Single Slot, No Ejector. Physical. Electrical. Environmental. UL File No.: E68080
M PC Card Header Meets PCMCIA specifications Tapered header pins provide easy insertion High temperature plastic insulator Solder retention clips option for secure hold-down Stand-off height options ESD
More information3M Eurosocket Type C (Rows A & C or A, B & C Filled)
DIN 41612 compatible High density (64 & 96 position) Mates with DIN 41612 Type C headers High reliability contact design Can be daisy-chained or end terminated to flat cable Optional strain relief with
More information3M CF Card Header CompactFlash Type I, Surface Mount
Meets CFA standards Single row solder tails with 0.65 mm spacing Board component clearance with 1.64 mm standoff Ejector option for easy removal of CF Card Retainer clip option permits stability for mobile
More information3M CF Card Header CompactFlash Type I, Surface Mount
Meets CFA standards Single row solder tails with 0.635 mm spacing Board component clearance with 1.64 mm standoff Ejector option for easy removal of CF Card Retainer clip option permits stability for mobile
More information3M Wiremount Socket Position for.050 Pitch Cable 79 Series
3M Wiremount Socket.100.100 64 Position for.050 Pitch Cable 79 Series Standard profile plastic strain relief Mates with 3M headers, plugs, and pin strips for quick connect/disconnect capability Centerbump
More information3M Pin Strip Header 2 mm and 2 mm x 2 mm Straight, Surface Mount 951 Series
3M Pin Strip Header 2 mm and 2 mm x 2 mm Straight, Surface Mount 951 Series High temperature dielectric No lead reflow solder compatible Maximizes use of PC board space End stackable feature Mates with
More informationDistributed by: www.jameco.com 1-800-81-4242 The content and copyrights of the attached material are the property of its owner. M Wiremount Socket.100.100 for.050 Pitch Cable 891 Series Preassembled, terminates
More informationDISCONTINUED. 3M PC Card Header Single Slot, Low Profile, Integrated Ejector. Physical. Electrical. Environmental. UL File No.
3M PC Card Header Single Slot, Low Profile, Integrated Ejector MCH Series Meets PCMCIA specifications Tapered header pins provide easy insertion High temperature plastic insulator Left or right ejector
More information3M I/O Interconnect System 2.0 mm for IEEE 1394
M I/O Interconnect System 2.0 mm for IEEE 194 Shell Kit for Receptacle E06 Series Complete shell kit for M 2.0 mm I/O Interconnect System for IEEE 194 Wiremount Receptacle (TS-2296) Includes outer body,
More informationDISCONTINUED. 3M PC Card Header Dual Slot, Low Profile, Integrated Ejector. Physical. Electrical. Environmental. UL File No.
PC Card Header Meets PCMCIA specifications Tapered header pins provide easy insertion High temperature plastic insulator Left or right ejector options ESD clips and plastic pegs for secure hold-down See
More information3M Pin Strip Header 2 mm 2 mm Solder Tail Straight & Right Angle, Surface Mount Straight 1512 Series
M Pin Strip Header Industry standard compatible High temperature dielectric "No lead" wave and reflow solder compatible Unique lengths available Maximizes use of PC board space Mates with boardmount and
More information3M D Sub EMI Junction Shell Metalized Plastic
M D Sub EMI Junction Shell Metalized Plastic Protection from EMI/ESD Easy assembly reduces time and labor to ensure low applied cost Light weight, compact design Strain relief compensates for multiple
More information3M Molded Socket for.050 Pitch Cable, Cable Assembly Connector 871 Series
3M Molded Socket.100.100 for.050 Pitch Cable, Cable Assembly Connector 871 Series Part of a complete cable assembly Mates with industry standard 0.025 inch square contacts on.100 inch x.100 inch centers
More information3M Low Profile Header Straight and Right Angle, Four-Wall 303 Series
.100.100 Straight and Right ngle, Four-Wall 303 Series ll over gold flash Sturdy body End windows Low cost Straight or right angle Ejector/latch option not available See Regulatory Information ppendix
More informationDISCONTINUED. Replaced by
M DIN R-Form Plug Inverse Mount, Vertical, Solder Tail or Press-Fit Termination DIN 41612 Series Early mate late break (EMLB) grounding contacts for hot swapping Select load capability Expanded pin counts
More information3M MetPak HSHM Press-Fit Header 2 mm Type B19, 95 Signal Contacts, 5 Rows, Straight HSHM Series
M MetPak HSHM Press-Fit Header Up to 5 Gb/s data rates Low crosstalk at high frequencies 50/100 Ω (single-ended /differential) impedance Modular/scalable format IEC 61076-4-101 6 mated lines per linear
More information3M Pak 10 Media Plug 1 mm Right Angle, Surfacemount, With Pwr. Gnd. Option PK10M Series
1 mm pitch connector system Four mating heights available Available power contacts rated at 5A Available frame ground connection through surfacemount retention clips Keyed design helps prevent mating misalignment
More information3M Ground Plane Cable.050" 28 AWG Stranded, One Drain, PVC 3476 Series
M Ground Plane Cable.050" 28 AWG Stranded, One Drain, PVC 476 Series 28 AWG wire on.050 inch centers permits mass termination to a broad line of IDC connectors Ground plane construction for increased signal
More information3M Pak 10 Boardmount Plug 1 mm Right Angle, Through-Hole PK10M Series
Pak 10 Boardmount Plug 1 mm pitch connector system Four mating heights available Available power contacts rated at 5A Available frame ground connection through surfacemount retention clips Keyed design
More information3M Serial Advanced Technology Attachment (SATA) Connector
M Serial Advanced Technology Attachment (SATA) Connector 22-position signal and power combination Input/ouput connector for backplane applications EMLB contacts for "hot swap" Blind mate polarization for
More informationDISCONTINUED 10/20/2011
Physical Electrical Environmental Insulation Material: Glass filled LCP Flammability: UL 94V-0 Color: White Material: Copper Alloy Plating Underplating: Nickel Wiping Area: 2 μ [ 0.05 μm ] min. Gold over
More information3M Round Conductor Flat Cable.025" 30 AWG Stranded, PVC 3754 Series
M Round Conductor Flat Cable.025" 0 AWG Stranded, PVC 754 Series Close spacing permits higher signal density PVC insulation provides excellent flexibility 0 AWG stranded on.025 inch spacing allows for
More information3M Card Connector SD Normal Polarization, Push-Push, Surfacemount SD Series
M Card Connector SD Low profile, light weight, and small size Compatibility with both SD card and multimedia card formats Smooth push push eject mechanism protect switch indicator Card polarization Card
More informationDISCONTINUED. 3M Accessories. Physical
3M ccessories.100.100 EMI System 3705/3706 Series Spring latch attachment allows quick, easy connect/ disconnect Fits existing 3M connectors Intra-cabinet grounding eliminates pigtails/ drain wires and
More information3M Round, Shielded/Jacketed, Disc. Wire Cable 26 AWG Solid, Twisted Pair, PVC/PVC 3560 Series
M Round, Shielded/Jacketed, Disc. Wire Cable 26 AWG Solid, Twisted Pair, PVC/PVC 560 Series Twisted pairs reduce crosstalk for balanced drive applications Dual shielding provides 5 db average shielding
More information3M Mini Serial Attached SCSI (minisas) Connector/Shell
M Mini Serial ttached SCSI (miniss) Connector/Shell 86/86 Series 6 Gb/s input/output connector for server applications Surfacemount termination on receptacle Multiple tail types available for board assembly
More information3M Four-Wall Header Latch/Ejector, Straight and Right Angle 3000 Series
M Four-Wall Header.100.100 Latch/Ejector, Straight and Right ngle 000 Series Military (with M's 518 & N518 polarizing key) and centerbump polarization Optional ejector latches Mounting holes for securing
More information3M Three-Wall Header Latch/Ejector, Straight and Right Angle 3000 Series
M Three-Wall Header.100.100 Latch/Ejector, Straight and Right ngle 000 Series Military (with M's 518 or N518 polarizing key) and center bump polarization Low profile Optional ejector latches Mounting holes
More information3M Pleated Foil Shielded Cable.025" 30 AWG Solid, TPE Primary, PVC Jacket, Low Skew Series
3M Pleated Foil Shielded Cable.025" 30 AWG Solid, TPE Primary, PVC Jacket, Low Skew 93101 Series Skew of less than 100 picoseconds/meter when terminated in unbalanced mode, with even wire signals (excluding
More information3M Round, Shielded/Jacketed, Flat Cable.050" 28 AWG Stranded, Mass Terminatable, PVC/PVC 3659 Series
M Round, Shielded/Jacketed, Flat Cable.050" 28 AWG Stranded, Mass Terminatable, PVC/PVC 659 Series Round construction permits easier routing 28 AWG wire on.050 inch pitch permits mass termination to broad
More information3M Round, Jacketed, Flat Cable.050" 28 AWG Stranded, Mass-Term, PVC/PVC 3759 Series
M Round, Jacketed, Flat Cable.050" 28 AWG Stranded, Mass-Term, PVC/PVC 759 Series Round construction permits easier routing 28 AWG wire on.050 inch centers permits mass termination to broad line of IDC
More information3M Four-Wall Header Latch/Ejector, Straight and Right Angle 3000 Series
M Four-Wall Header.100.100 Latch/Ejector, Straight and Right ngle 000 Series Military (with M s 518 & N518 polarizing key) and centerbump polarization Optional ejector latches Mounting holes for securing
More information3M Eurosocket Type C (Rows A & C, A & B or A, B & C Filled)
DIN 41612 compatible High density (64 & 96 position) Mates with DIN 41612 Type C headers High reliability contact design Can be daisy-chained or end terminated to flat cable Optional strain relief with
More informationDistributed by: www.jameco.com 1-800-81-4242 The content and copyrights of the attached material are the property of its owner. M Four-Wall Header Low Profile, SMT Straight, Straight and Rt ngle Through-Hole
More information3M CF Card Header CompactFlash Type I, Surface Mount
CF Card Header Meets CF standards Single row solder tails with 0.635 mm spacing Board component clearance with 1.64 mm standoff Ejector option for easy removal of CF Card Retainer clip option permits stability
More information3M MetPak HSHM Press-Fit Header 2 mm Type B25, 125 Signal Contacts, 5 Rows, Straight HSHM Series
M MetPak HSHM Press-Fit Header Up to 5 Gb/s data rates Low crosstalk at high frequencies 50/100 Ω (single-ended /differential) impedance Modular/scalable format IEC 61076-4-101 6 mated lines per linear
More information3M HDC Header. Physical. Electrical. Environmental Vertical Mount, PCB/Backplane, Solder Tail or Press-Fit HDC Series
M HDC Header High density, up to 240 contacts single bay Early Mate Late Break (EMLB) grounding contacts for hot swapping Mates with three-row and four-row sockets RoHS* compliant. See the Regulatory Information
More information3M Pak 50 Stacking Compression Connector 130 Position 388 Series
Pak 50 Stacking Compression Connector No solder joints, compression stacking connector Standardized interface for Intel Modular Interface extension (MIX) Bus (module to module and module to baseboard connector)
More information3M 4-Wall Header Latch/Ejector, Straight and Right Angle 3000 Series
Military (with 's 3518 polarizing key) and centerbump polarization Standard ejector latches Mounting holes for securing header to board RoHS* compliant Optional polarizing posts High temperature insulator
More information3M Pak 50 Stacking Compression Connector 130 Position 388 Series
Pak 50 Stacking Compression Connector No solder joints, compression stacking connector Standardized interface for Intel Modular Interface extension (MIX) Bus (module to module and module to baseboard connector)
More informationDistributed by: www.jameco.com 1-800-831-4242 The content and copyrights of the attached material are the property of its owner. .100.100 Latch/Ejector, Straight and Right ngle 3000 Series Military (with
More information3M 4-Wall Header Low Profile, SMT Straight, Straight and Right Angle Thru Hole2500 Series
M 4-Wall Header.100.100 Low Profile, SMT Straight, Straight and Right ngle Thru Hole2500 Series Low profile, space saving design Center slot polarization prevents mis-insertions and reduces insertion time
More information3M Pak 100 L/E Pinless Header.100".100" Straight, 4-Wall 3000 Series
Optional ejector latches Shrouded to minimize physical and chemical pin damage Special holes secure pinless header to back panel Mounting holes to further secure header to board Stand-off height allows
More information3M MetPak 2-FB Power Socket 2 mm 4/5-Row, Right Angle, Solder or Press-Fit Tail MP2 Series
6.50 Amps per contact End-to-end stackable Press or heat stake peg (solder tail) Futurebus+ compatible See the Regulatory Information Appendix (RIA) in the RoHS compliance section of www.m.com/ interconnects
More information3M Eurosocket Type C (Rows A & C, A & B or A, B & C Filled)
DIN 41612 compatible High density (64 & 96 position) Mates with DIN 41612 Type C headers High reliability contact design Can be daisy-chained or end terminated to flat cable Optional strain relief with
More information3M MetPak 2-FB Power Socket 2 mm 4/5-Row, Right Angle, Solder or Press-Fit Tail MP2 Series
6.50 Amps per contact End-to-end stackable Press or heat stake peg (solder tail) Futurebus+ compatible See the Regulatory Information Appendix (RIA) in the RoHS compliance section of www.mconnectors.com
More information3M Pin Strip Header 2 mm 2 mm Solder Tail Straight & Right Angle, Surface Mount Straight 1512 Series
M Pin Strip Header Mates with a variety of dual row 2 board mount and wire mount sockets High temperature insulator compatible with lead-free solder processes Extensive pin count availability from 4 to
More information3M MetPak 2-FB Socket 2 mm 4/5-Row, Solder Tail or Press-Fit With Tail Cover, Right Angle MP2 Series
M MetPak 2-FB Socket End-to-end stackable Offset dual-beam contact minimizes insertion force Expanded pin counts Protective Push-Cap Monoblockable Press or heat stake peg 12 mm modular units Meets global
More information3M Pin Strip Header 2 mm 2 mm Solder Tail Straight & Right Angle, Surface Mount Straight 1512 Series
Industry standard compatible High temperature dielectric "No lead" wave and reflow solder compatible Unique lengths available Maximizes use of P board space Mates with boardmount and wiremount products
More information3M MetPak 2-FB Socket
M MetPak 2-FB Socket End-to-end stackable Offset dual-beam contact minimizes insertion force Molded guide fingers provide integrated alignment Alignment wafer for true position Mates with MP2-P inverse
More informationPhysical. Electrical. Environmental
M MetPak 2-FB Inverse Header 2 mm 5-Row, Right Angle, Solder MP2 Series Three levels of early mate, late break (EMLB) sequencing or selective loading options Footprint compatible with standard Futurebus+
More information3M Pak Wall Header Latch/Ejector, Straight and Right Angle 3000 Series
Pak 100 4-Wall Header.100.100 Latch/Ejector, Straight and Right ngle 3000 Series Military (with 's 3518 polarizing key) and centerbump polarization Standard ejector latches Mounting holes for securing
More information3M Three-Wall Header Latch/Ejector, Straight and Right Angle 3000 Series
M Three-Wall Header.100.100 Latch/Ejector, Straight and Right ngle 000 Series Military (with M s 518 or N518 polarizing key) and center bump polarization Low profile Optional ejector latches Mounting holes
More information3M Pak Wall Header
M Pak 100 4-Wall Header.100.100 Latch/Ejector, Straight and Right ngle, High Temp Option 000 Series S Military (with M s 518 polarizing key) and centerbump polarization S Optional ejector latches S Mounting
More informationLatch/Ejector, Straight and Right Angle 3000 Series
Military (with M s 518 & N518 polarizing key) and centerbump polarization Optional ejector latches Mounting holes for securing header to board Optional polarizing posts available High temperature insulator
More information3M Four-Wall Header.100".100" Latch/Ejector, Straight and Right Angle 3000 Series
M Four-Wall Header.100".100" Latch/Ejector, Straight and Right ngle 000 Series Military (with M s 518 & N518 polarizing key) and centerbump polarization Optional ejector latches Mounting holes for securing
More information3M Accessories EMI System 3705/3706 Series. Physical
M ccessories.100.100 EMI System 705/706 Series S Spring latch attachment allows quick, easy connect/ disconnect S Fits existing M connectors S Intra-cabinet grounding eliminates pigtails/drain wires and
More information3M Pin Strip Header, 1512 Series 2 mm 2 mm Solder Tail Straight & Right Angle, Surface Mount Straight
2 2 Solder Tail Straight & Right Angle, Surface Mount Straight Mates with a variety of dual row 2 board mount and wire mount sockets High temperature insulator compatible with lead-free solder processes
More informationPART NUMBER REFERENCE I C L X X X () M. Select Connector Type: End 2. Cable Type Options: Option: Length in Meters
K I L R E M C I T E R L C M E R L I K C B L E S I T E R L R I B B O C B L E P P L I C T I O S I T E R L PRT UMBER REFERECE I C L X X X () M Select Connector Type: End 1 MDR Female = 1 MDR Male Low Profile
More informationPOSEIDON SCIENTIFIC INSTRUMENTS PTY LTD 17 QUEEN VICTORIA ST, FREMANTLE WA PHONE (08) FAX (08) CAB-0XXX (SALEM CODE)
POSEIDON SCIENTIFIC INSTRUMENTS PTY LTD 17 QUEEN VICTORIA ST, FREMANTLE WA 6160. PHONE (08) 9430 6639 FAX (08) 9335 4650 CABLE DRAWING: CAB-0XXX (SALEM CODE) DRAWING TITLE: ASC1 to SBC(ASC1) I2C Control
More information3M Interconnect Products
3M Interconnect Products Molded-On Cable Assembles www.ttiinc.com T h e NWeo rvl d e s r L e as d ihn g o Pr a t s s i vo e n & C So non el c ut o tr is po e cn i as l i s t 3M Molded-On Cable Assemblies
More informationPOSEIDON SCIENTIFIC INSTRUMENTS PTY LTD 17 QUEEN VICTORIA ST, FREMANTLE WA PHONE (08) FAX (08) MWA-3021
CABLE DRAWING: POSEIDON SCIENTIFIC INSTRUMENTS PTY LTD 17 QUEEN VICTORIA ST, FREMANTLE WA 6160. PHONE (08) 9430 6639 FAX (08) 9335 4650 DRAWING TITLE: ATIM-C PSU Control Cable MWA-3021 DRAWING NO.: MWACAB-0021
More informationOverall Length
CABLE DRAWING: POSEIDON SCIENTIFIC INSTRUMENTS PTY LTD 17 QUEEN VICTORIA ST, FREMANTLE WA 6160. PHONE (08) 9430 6639 FAX (08) 9335 4650 MWA-3004 DRAWING TITLE: ASC2 to SBC(ASC2) I2C Control Cable DRAWING
More information3M Medium-Wall Heat Shrink Tubing IMCSN
3M Medium-Wall Heat Shrink Tubing IMCSN Data Sheet November 2017 Product Description 3M Medium-Wall Heat Shrink Tubing IMCSN is designed to provide reliable performance for electrical splices, connections,
More information3M Electromagnetic Compatible Products
3M Electromagnetic Compatible Products 3Innovation Faster, smaller, lighter, easier the skyrocketing development of today s electronics requires new solutions for significant new problems. These solutions
More information3M Scotchlok Copper Compression Lugs, and Series
Copper Compression s, 30000 and 31000 Series Data Sheet June 2011 Description Copper Compression s are one-piece, seamless copper and are designed to cover a wide range of conductor sizes. They are available
More informationFreescale Semiconductor Inc
Freescale Semiconductor Inc PART INFORMATION Mfg Item Number Mfg Item Name MC908LK24CFUE QFP 64 14*14*2.2P0.8 SUPPLIER Company Name Freescale Semiconductor Inc Company Unique ID 14-141-7928 Response Date
More informationHS h e n EU omplia t 2002 / 9 5 / C
9 57-30500 0 0 E U 2 C A mp hen 2/ 5 / E omplia Ro HS ol C nt hen z n She 57-30360 DE-09P & DE-09S Standards: UL File: E119881 Connectors according to MIL C24308 SPECIFICATIONS : MATERIALS AND Shells Steel
More informationFreescale Semiconductor Inc
Freescale Semiconductor Inc PART INFORMATION Mfg Item Number Mfg Item Name MC68SEC000CAA16 QFP 64 14*14*2.2P0.8 SUPPLIER Company Name Freescale Semiconductor Inc Company Unique ID 14-141-7928 Response
More informationFreescale Semiconductor Inc
PART INFORMATION Mfg Item Number Mfg Item Name MKE02Z32VLC2 LQFP 32 7*7*1.4P0.8 SUPPLIER Company Name Company Unique ID 14-141-7928 Response Date 2017-02-25 Response Document ID 6300K11060D060A1.8 Contact
More informationFreescale Semiconductor Inc
Freescale Semiconductor Inc PART INFORMATION Mfg Item Number Mfg Item Name MC56F82746VLF LQFP 48 7*7*1.4P0.5 SUPPLIER Company Name Freescale Semiconductor Inc Company Unique ID 14-141-7928 Response Date
More informationFreescale Semiconductor Inc
Freescale Semiconductor Inc PART INFORMATION Mfg Item Number Mfg Item Name MKE02Z32VLC4R LQFP 32 7*7*1.4P0.8 SUPPLIER Company Name Freescale Semiconductor Inc Company Unique ID 14-141-7928 Response Date
More informationFreescale Semiconductor Inc
PART INFORMATION Mfg Item Number Mfg Item Name MC14489BDWE SOIC 20W SUPPLIER Company Name Company Unique ID 14-141-7928 Response Date 2015-07-22 Response Document ID 2005A1.13 Contact Name Contact Title
More informationFreescale Semiconductor Inc
Freescale Semiconductor Inc PART INFORMATION Mfg Item Number MC33MR2001R2VK Mfg Item Name RCPBGA 85 6*6*0.95 P0.5 SUPPLIER Company Name Freescale Semiconductor Inc Company Unique ID 14-141-7928 Response
More informationFreescale Semiconductor Inc
Freescale Semiconductor Inc PART INFORMATION Mfg Item Number Mfg Item Name MCM16Y1BACFT16 QFP 160 28*28*3.3P0.65 SUPPLIER Company Name Freescale Semiconductor Inc Company Unique ID 14-141-7928 Response
More informationFreescale Semiconductor Inc
Freescale Semiconductor Inc PART INFORMATION Mfg Item Number Mfg Item Name SPC5643LF2MLQ1 LQFP 144 20SQ1.4P0.5 C90 SUPPLIER Company Name Freescale Semiconductor Inc Company Unique ID 14-141-7928 Response
More information3M Cold Shrink Silicone Rubber Connector Insulators 8440 Series
3M Cold Shrink Silicone Rubber Connector Insulators 8440 Series Data Sheet May 2014 Product Description 3M Cold Shrink Connector Insulators 8440 Series are open-ended, silicone rubber, tubular sleeves.
More information3M Cold Shrink Joint, SC145-II/SS145-II
3M Cold Shrink Joint, SC145-II/SS145-II Data Sheet June 2011 Description Features 3M Cold Shrink Joint, SC145-II/SS145-II meets requirements of IEC60840-2004 and GB11017.3 standards. Ideal electrode design
More informationFreescale Semiconductor Inc
PART INFORMATION Mfg Item Number MVF30NS151CKU26 Mfg Item Name LQFP-EP 176 24*24*1.6 SUPPLIER Company Name Company Unique ID 14-141-7928 Response Date 2017-04-08 Response Document ID 00C2K50001S051A1.4
More informationFreescale Semiconductor Inc
Freescale Semiconductor Inc PART INFORMATION Mfg Item Number Mfg Item Name MK20DX64VLF5 LQFP 48 7*7*1.4P0.5 SUPPLIER Company Name Freescale Semiconductor Inc Company Unique ID 14-141-7928 Response Date
More informationFreescale Semiconductor Inc
Freescale Semiconductor Inc PART INFORMATION Mfg Item Number Mfg Item Name MC68LC040RC25A PGA 179 FG SUPPLIER Company Name Freescale Semiconductor Inc Company Unique ID 14-141-7928 Response Date 2017-06-22
More informationFreescale Semiconductor Inc
Freescale Semiconductor Inc PART INFORMATION Mfg Item Number Mfg Item Name DSP56F803BU80E LQFP 100 14*14*1.4P0.5 SUPPLIER Company Name Freescale Semiconductor Inc Company Unique ID 14-141-7928 Response
More informationFreescale Semiconductor Inc
Freescale Semiconductor Inc PART INFORMATION Mfg Item Number Mfg Item Name MC908AZ60ACFUE QFP 64 14*14*2.2P0.8 SUPPLIER Company Name Freescale Semiconductor Inc Company Unique ID 14-141-7928 Response Date
More information3M Scotchcast Flame-Retardant Compound 2131 (Parts A
Scotchcast Flame-Retardant Compound 2131 (Parts A and B) 03/21/19 This is provided as a courtesy in response to a customer request. Document Group: 28-8293-4 Version Number: 3.02 Issue Date: 03/21/19 Supercedes
More informationDistributed by: www.jameco.com 1-800-831-4242 The content and copyrights of the attached material are the property of its owner. 1.0 SCOPE This Product Specification covers the 3.96 mm (.156 inch) centerline
More informationFreescale Semiconductor Inc
Freescale Semiconductor Inc PART INFORMATION Mfg Item Number MAG3110FCR1 Mfg Item Name DFN 10LD 2*2*0.85 P0.4 SUPPLIER Company Name Freescale Semiconductor Inc Company Unique ID 14-141-7928 Response Date
More informationFreescale Semiconductor Inc
Freescale Semiconductor Inc PART INFORMATION Mfg Item Number Mfg Item Name S912ZVLA12F0MLC LQFP 32 7*7*1.4P0.8 SUPPLIER Company Name Freescale Semiconductor Inc Company Unique ID 14-141-7928 Response Date
More informationFreescale Semiconductor Inc
Freescale Semiconductor Inc PART INFORMATION Mfg Item Number PCIMX6L8DVN10AA Mfg Item Name MAPBGA 432 13*13 P0.5 SUPPLIER Company Name Freescale Semiconductor Inc Company Unique ID 14-141-7928 Response
More informationFreescale Semiconductor Inc
Freescale Semiconductor Inc PART INFORMATION Mfg Item Number Mfg Item Name MMPF0100F9ANES QFN-EP 56 8*8*0.9 P.5 WF SUPPLIER Company Name Freescale Semiconductor Inc Company Unique ID 14-141-7928 Response
More information