TRAC Oil & Gas Ltd. Rope Access.
|
|
- Mervin Gordon Fowler
- 6 years ago
- Views:
Transcription
1 Rope Access TRAC provides working at height and difficult access solutions. We supply a range of innovative and complementary access and training services that add value for our customers by increasing the safety of our worksites. TRAC has been a full and active member of IRATA since 1999, with an unrivalled safe working record when delivering rope access solutions to our customers. Rope Access offers several benefits over conventional access systems for difficult to reach worksites. It is a safe, cost effective, efficient and versatile means of access. As specialists with vast experience in the rope access industry, we offer fully project managed workscopes, supplying a variety of competent, multi-disciplined rope access personnel to carry out our full range of inspection, maintenance and repair services. Access Solutions Include: TRAC Multispan Work Positioning Netting Rescue & Recovery Services Confined space Entry, UK,
2 TRAC Oil & Gas Rope Access TRAC Multispan Temporary light weight platforms where the workscope requires a sure footing to complete works safely. Ideal for tall structures, underdeck access and over side projects, the TRAC Multispan is a modular system and can be extended as required. Work Positioning Netting TRAC provides Work Positioning Netting systems as a means of accessing underdeck and difficult access locations, flexible and dynamic to suit the specific application. Rescue & Recovery Services TRAC provides supervisory services to oversee any potential rescue and recovery situation. Development of rescue plans, and supply of highly experienced personnel and equipment, to oversee the safety of our customers, operations and staff. Confined Space Entry TRAC provides trained and competent personnel to gain and oversee safe access to confined spaces to carry out necessary works. Personnel are also trained in atmospheric monitoring and we are experts in confined space rescue.
3 Engineering Support TRAC offers a one-stop engineering service capability encompassing project management, technical support and delivery of multi-disciplined services. We have a proven track record in successfully delivering large-scale engineering solutions, working closely with customers from project conception through to commissioning and completion. Our team of competent and qualified engineers and project managers are able to develop integrated solutions to meet specific client requirements and deliver these cost effectively and safely. Integrated solutions include: Research & Design Project Planning & Workpack Development Implementation & Delivery Multi-disciplined Site Services Testing & Commissioning Ongoing Inspection and Maintenance, UK,
4 Inspection & Testing TRAC is accredited in accordance with UKAS BS EN ISO/IEC 17020:2012. TRAC provides a comprehensive range of inspection and non-destructive testing services for materials and structures across all industry sectors. We offer integrated packages to suit specific requirements including full project management and technical capability, conventional base and site services, and a range of specialist and advanced methods that utilise new and developing technology. Conventional NDT services Magnetic Particle Inspection Dye Penetrant Inspection Ultrasonic Testing Eddy Current Inspection Radiography Visual Inspection, UK,
5 TRAC Oil & Gas Inspection & Testing Magnetic Particle Inspection (MPI) Magnetic Particle Inspection (MPI) is used for detecting surface and near surface discontinuities in ferromagnetic materials. When a magnetic field is induced into the material by using an electromagnet, the presence of a surface breaking defect will create a leakage field. This leakage field is made visible to the human eye by use of finely divided ferromagnetic particles which are attracted to the leakage field thus giving a visible indication of discontinues, their size, location and shape. Dye Penetrant Inspection (DPI) / Penetrant Testing (PT) Penetrant testing is used for detecting surface breaking discontinuities in Ferromagnetic and non-ferromagnetic materials. Penetrants are brightly coloured dyes that are applied to the surface of the test material and given time (Dwell time) to enter into any defects. Penetrant testing can be used on any non-porous material. On completion of the Dwell period a highly absorbent developer is lightly sprayed onto the test area, drawing out dye from any discontinuity. The developer offers a contrast to the colour of the dye making interpretation of any defects highly visible. Alternative Penetrant methods include Fluorescent PT for use on carefully machined surfaces. Ultrasonic Inspection (UT) Ultrasonic Testing is the technique that measures the time for high frequency pulses of sound waves to travel through the inspection material, the frequencies are usually MHz but occasionally up to 50MHz. If a discontinuity is present, the sound wave will return to the probe in a shorter time than expected from a fault free specimen. Eddy Current Inspection (ECI) Eddy current testing is the technique where electrical currents are induced in to the material being inspected and observing the interaction between the currents and the material. Eddy currents are generated by coils in the probe and is monitored simultaneously by measuring the change in impedance in the coils. As eddy current is an electromagnetic induction process, direct contact with the material is not required, however, the material must be an electrical conductor. Other inspection techniques we offer are: Radiography (RAD) Radiography uses penetrating radiation that is directed towards a component. The component stops some of the radiation. The amount that is stopped or absorbed is affected by material density and thickness differences. These differences in absorption can be recorded on film, or electronically. Visual Inspection (VIS) Comprehensive offshore specific courses are offered in-house to meet our client s contractual requirements, including Coatings & Insulation Inspection.
6 Specialist Inspection Controlled Area Radiography Unrestricted use onsite compact equipment offering safe barrier radius of 2 meters. No disruption to adjacent work scopes or nucleonic measuring equipment and reduced exposure risks to technicians/ personnel. Suitable for all radiography applications and locations (offshore and onshore installations). Computed Radiography Shorter exposure times compared to conventional processing and no dark room requirements. Image annotations allowing accurate thickness measurements and repeatability. Multi-thickness components covered with a single exposure. Digital media allows ing of images/results for onshore review. Suitable for corrosion under insulation, corrosion monitoring, temporary repair inspection, flexible riser inspection. Time of Flight Diffraction (TOFD) Sizing of flaws in new and in-service welds and components. Offers high Probability of Detection and immediate inspection results. An alternative to radiography and better reliability than conventional UT for in-service inspection., UK,
7 TRAC Oil & Gas Specialist Inspection Phased Array Ultrasonics (PAUT) Ultrasonic inspection technique alternative to radiography weld scanning, in-service pipe and vessel scanning corrosion mapping, flange face inspection. Multiple angle scans with single probe, beam steering capability, multiple on screen representation, sophisticated data analysis and reduced inspection time. Saturated Low Frequency Eddy Current (SLOFEC) Automated system based on magnetic biased eddy current principal, offering high speed inspection, high POD, with increased sensitivity and reliability. Suitable for pipe and vessel scanning, tank floor scanning and MIC (microbiological corrosion) inspection. Long Range Ultrasonics (LRUT) Utilising Guided Wave technology. Fast screening of long lengths of pipework. Suitable for inspection of clad, buried, bridge crossings, jetty s, offshore risers, any sections of inaccessible pipework where there is access to one end. Minimum access required, time/cost savings, and fast set-up time. Thermal Imaging (Thermography) Fast and effective screening method for detection of leaks in offshore process systems and faults with electrical components circuitry. Light and compact equipment for one man operation and suitable for rope access use. Reliable proven technology for temperature measurements up to 1500 C. Positive Material Identification (PMI) Handheld and mobile Thermo- Scientific analysers are engineered for portable elemental analysis and ease of use. A very fast method of establishing the nature of any material in question and ideal for identifying in-service gasket material, piping material and bolt material. Riser Inspection (AquaTRAC) The AquaTRAC riser inspection tool is designed to carry out cleaning, close visual, radiographic and ultrasonic inspection on Flexible Risers. The system employs adjustable diameter fitment to risers, high pressure water cleaning system to safely remove marine growth. Close visual inspection of the riser using the 2 fully operating pan and tilt video survey cameras, and any areas of concern identified can then be subject to further inspection using radiographic or techniques to check for any underlying damage.
8 Non-Intrusive Inspection TRAC provides Non-Intrusive Inspection of: Pressure vessels Tank shells Pipework and pipelines Spheres Ship hulls Other large structures Techniques used include Automated Ultrasonics Automated and Semi-automated Phased Array Corrosion Mapping Time of Flight Diffraction Eddy Current, UK,
9 TRAC Oil & Gas Non-Intrusive Inspection The latest technology, RMS 2 Non-Intrusive Inspection solution utilised by TRAC s experienced technicians is a high speed, high accuracy remote access ultrasonic corrosion mapping system. It is designed to evaluate the condition of ferrous structures such as storage tanks, pipework and pipelines (6 and above), pressure vessels and other critical equipment. It can give 100% coverage in a band up to 1000mm wide, significantly increasing probability of detection (POD) of corrosion. Features and Benefits Fast coverage with realtime image display (2.63m per hour) Very high accuracy scanning High Probability of Detection (0.5mm scan grid) Inspection material thickness up to 150mm Very high productivity (17m2 per 8 hour shift) Supports longitudinal scanning for increased productivity Full off line analysis and reprocessing Determination of external or internal corrosion Applications Localised and general pitting General corrosion Laminations Hydrogen blistering Hydrogen induced cracking More data can be collected, in higher resolution, than ever before, increasing probability of detection. Automated methods allow full repeatability in continuous inspection regimes. The full scan is recorded, giving a permanent visual record and the scan is completed far quicker than with a traditional UT set. The unit can also be modified to carry out additional methods e.g. installation of TOFD probes.
10 Remote Inspection ROV s for the Oil & Gas Industry Utilising the latest mini ROV technology to carry out underwater close visual inspections, this allows quick and effective initial inspection as well as ongoing monitoring of defects. Advantages include no manned entry to tank or deep waters and minimal disruption to operations. Work scopes include: FPSO/Ship class inspection Water ballast tank inspection including thickness measurements to meet class survey requirements Potable Water Tanks In water external hull surveys Mooring Chains Propellers and Risers Capability to carry out thickness measurements, cathode protection (CP) readings, Laser measurements., UK,
11 TRAC Oil & Gas Remote Inspection Other industries TRAC provides efficient, safe and cost effective ROV inspection to the aquaculture and inshore industries. Aquaculture Services include: Mooring inspections (barge and cages) to check equipment is correctly placed Seabed and site surveys Net inspection Quay, slipway and cable Inspections Inshore services include: Bridge Inspection Ports and Harbours Potable Water Tanks ROV Specifications: VideoRay Pro 4 specifically configured to quickly and effectively perform a variety of underwater tasks Data sheet Saab Seaeye Falcon market leading, light and powerful ROV with impressive capabilitiesdata sheet Outland 1000 innovative, versatile and light weight ROV data sheet UAVs Using video from a UAV survey, TRAC can, with the help of skilled inspection personnel, produce visual inspection reports as well as recommend and provide maintenance and repair services. The UAVs would increase TRACs visual inspection capacity, providing a full visual inspection service alongside ROVs.
12 Marine Class Survey & Repair Class Survey TRAC has highly experienced Project Engineers and Inspectors fully conversant with hull structural survey requirements and we are certified by the following IACS member classification societies: Applications: Close Visual Inspection (including use of Mini ROV in water ballast tanks) Thickness Measurement Marine Piping Secondary Structure Hull Penetrations Cathodic Protection Coating Systems Benefits: Planning & Documentation Handling of regular survey regimes Class Liaison Safety Management, UK,
13 TRAC Oil & Gas Marine Class Survey & Repair Repair TRAC has multi-discipline Rope Access teams experienced in performing Hull Repair workscopes. Applications: Resolve defects found in survey Preventative maintenance and repair Benefits: Fully project managed by experienced engineers Multi-discipline teams to carry out survey and repair work Trades include: Rope Access, NDT Technicians, Fabricator/Platers, Coded Welders, Riggers All works carried out and inspected as per class approved repair procedures.
14 Mechanical & Electrical Trades TRAC offers a full complement of mechanical trades for all construction, installation, maintenance and decommissioning related activities. As a specialist rope access provider, TRAC has particular expertise in providing services in remote and difficult access locations with over a decade of experience in delivering safe and cost effective solutions for our customers globally. All traded personnel provided are fully qualified and verified competent in their given area of expertise, and all projects are managed by our team of experienced and customer focused project managers. Mechanical services include: Welding & Fabrication Pipefitting & Plating Steelwork Installation Bolt Services Decommissioning, UK,
15 TRAC Oil & Gas Mechanical & Electrical Trades Welding, Plating and Fabrication Full range of welding, plating and fabrication services utilising fully coded welders to relevant international standards and trade competent platers/fabricators. Services include but not limited to: Hull, Water Ballast & Cargo Oil Tank repairs (Class approved-hyperlink certs) Structural steelwork installation and repair Derrick repairs Flare tower member replacement Install Caissons and Risers (case study for al bullet points) Pipefitting Fully qualified and competent pipefitters and instrument fitters for construction, maintenance and repair activities. Services include but not limited to: Flexible Piping systems (link to trelleborg) Topside pipework installation and repairs Fare tip replacement Small bore pipe work Steelwork Installation We provide a full range of steelwork/glassfibre Reinforced Plastic(GRP) installation. Services include but not limited to the repair and installation of: Gratings and handrails Ladders and platforms Cladding Windwalls HVAC systems Walkways and modules Bolt services Full range of Bolt torque/tensioning services and bolt inspections. All conducted by qualified and competent technicians ensuring accuracy in bolt loadings and compliance with engineering specifications. Decommissioning Full range of mechanical and construction related decommissioning services incorporating: Rigging and lifting Hot and cold cutting systems Dismantling and disposal Electrical Trades We provide a full range of installation, inspection, maintenance and commissioning services for Oil & Gas electrical systems. Supplying fully qualified and competent electricians with CompEX Electrical Hazardous Area certification. Services include but not limited to: EX Electrical inspection/ maintenance Lighting systems Communication systems CCTV/PA Heat Trace systems UV/IR detection systems
16 Rigging & Lifting From concept to completion, TRAC has extensive experience providing fully engineered lifting solutions. We specialise in rope access rigging at height in difficult to access locations. We provide the lifting plans, equipment and competent & qualified rope access riggers for all LOLER compliant rigging & lifting operations. Our engineers will carry out an initial survey then liaise with the client to create tailored lifting plans. Personnel and equipment can then be mobilised to complete the workscope which is fully project managed by our experienced onshore rigging support team. All works are carried out by teams of multi-discipline rope access technicians. TRAC is accredited by the Lifting Equipment Engineers Association (LEEA) to inspect lifting equipment. Please see overleaf. Related Rigging applications include: Rigging and installation of structural steelwork Riser installation Pipework installation Deluge system installation Construction activities Decommissioning Topside support for diving works, UK,
17 TRAC Oil & Gas Rigging & Lifting Lifting Equipment Inspection TRAC is accredited in accordance with UKAS BS EN ISO/IEC 17020:2012. TRAC provides a comprehensive range of inspection and non-destructive testing services for materials and structures across all industry sectors. We offer integrated packages to suit specific requirements including full project management and technical capability, conventional base and site services, and a range of specialist and advanced methods that utilise new and developing technology. Continuous inspection of lifting equipment is required every 6-12 months as per the Lifting Operations and Lifting Equipment Regulations 1998 (LOLER). TRAC has capabilities to provide these inspections and experienced project managers can also create the required examination schedules. In addition to regular examinations, equipment also needs inspected if it has been, subject to damage or out of use for an extended period of time TRAC is a full member of the Lifting Equipment Engineers Association (LEEA). The LEEA code of practice is recognised worldwide as the most up-to-date, authoritative source of lifting equipment information. TRAC project managers and field staff hold LEEA qualifications which allow them to recommend, carry out and report on lifting equipment inspections. Inspection methods include: Thorough visual examination and function checks, measurement of wear Conventional NDT (UT, MPI, DPI, EC) Load Testing Dis-assembly or internal examination of some parts as required The safety and maintenance of lifting equipment is also a requirement of the Provision and Use of Work Equipment Regulations 1998 (PUWER). TRAC offers the necessary risk assessments and record keeping of items, even if immediate repairs can be carried out. TRAC technicians, with their IRATA qualifications, have specific working at height expertise and a full appreciation of dropped object potential as part of their everyday jobs. Rope access presents the added advantage of surveying difficult to reach areas, this is useful considering most dropped objects originate from equipment or structures mounted at height.
18 Fabric Maintenance TRAC is a supplier of integrated fabric maintenance solutions for all structures and industry sectors. We offer a comprehensive range of site services which, coupled with our in-house management expertise and technical capability, enables us to assist in enhancing the integrity and lifespan of our customer s assets. TRAC successfully delivers life-time extension programmes from entire structural coating systems, through to one-off specialist applications. Fabric Maintenance activities include: Condition Surveys Surface Preparation Coating Solutions Insulating Systems Passive Fire Protection, UK,
19 Fire Protection Systems TRAC is approved Installation Partner for Trelleborg Elastopipe TRAC provides a range of services relating to Fire Protection Systems including full installation, commissioning, inspection, maintenance and testing services for the following areas: Carbon Steel and Alloy Systems Wet and Dry Systems Temporary Systems Elastopipe TRAC is the Trelleborg approved installer for new and innovative flexible piping systems, Elastopipe, the market leading product in the field of flexible pipe and deluge systems., UK,
20 Training Personnel Competence is a key element in all aspects of TRAC Oil & Gas. Staff development is actively encouraged at all levels. TRAC has demonstrated commitment to its staff by achieving awards such as Investors in People. When considering contract competency issues TRAC has developed extensive and robust systems to ensure the client s specific requirements are met or indeed exceeded. Inspection/NDT personnel are, in general terms, trained & certified in accordance with National or International recognised Schemes such as Personnel Certification in Non-destructive testing (PCN) or Certification Scheme for Welding & Inspection Personnel (CSWIP) both in accordance with ISO 9712 Non-destructive testing Qualification and certification of NDT personnel. An employer based scheme commonly applied is The American Society for Nondestructive Testing Inc. Recommended Practice SNT-TC-1A, Personnel Qualification and Certification in Nondestructive Testing., UK,
21 TRAC Oil & Gas Training Certification and Competency: Having being certified in accordance with a recognised scheme is not evidence of competency. What defines competency? In general terms competency is defined as: Education, formal training, independent assessment, relevant experience and finally attitude. Add to this knowledge of the processes and component to be tested. TRAC has developed a process to evaluate these attributes and if necessary, fill the gaps identified. Below is an illustration of the Skills Matrix of a Rope Access Inspection / NDT Technician employed in an offshore environment. Skills Matrix Outline process for inspection personnel employed in upstream oil & gas facilities CORE SKILLS Visual Product Technology NDT Methods INSPECTION BASE KNOWLEDGE QA/QC Recording/Reporting Processes INDUSTRY SPECIFIC KNOWLEDGE Safety Relevant background information on working environment INTEGRITY MANAGEMENT OVERVIEW Coatings & External Corrosion Process Pipework Internal Corrosion Pressure Systems It is fairly obvious that the certification process at best deals with some of the core skills. All other aspects of the matrix are relevant to the job in hand. TRAC has in place, comprehensive courses to allow us to train, assess and certify personnel in these methods and techniques. The courses are specific to Industry needs i.e. Offshore structures viz. Platforms, MODUs, FPSO or FSU. TRAC has purpose built facilities in the United Kingdom, and Brasil for courses in both Rope Access (IRATA) and Inspection/NDT. The tutors are highly qualified and experienced in their fields of expertise. In summary, TRAC is committed to the supply of verified competent personnel in whatever discipline is required to fulfil the contractual requirement, and has the necessary resources to do so.
Asset integrity Fabric maintenance Environmental services E&I services Mechanical services
Asset integrity Fabric maintenance Environmental services E&I services Mechanical services Company Profile At Total Solutions we welcome challenge, not only in finding innovative solutions to the problems
More informationDepartment of Chemical & Polymer Engineering University of Engineering & Technology Lahore (FSD Campus)
Department of Chemical & Polymer Engineering University of Engineering & Technology Lahore (FSD Campus) 1 Nondestructive testing (NDT) use test methods to examine an object, material or system without
More informationINSPECTION SERVICES FOR ALL YOUR INSPECTION NEEDS
INSPECTION SERVICES FOR ALL YOUR INSPECTION NEEDS COMPETENCE RELIABILITY CAN DO YOUR PARTNER FOR INSPECTION SERVICES Headquartered in Thailand our journey began 25 years ago in Norway from where we have
More informationNTEGRITY & NSPECTION
NTEGRITY & NSPECTION THE EXPERT PROVIDER OF ASSET INTEGRITY AND INSPECTION SERVICES TO THE GLOBAL OIL & GAS ENERGY INDUSTRIES. ASSET INTEGRITY PARTNER ASSET INTEGRITY PARTNER Integrity & INSPECTION Services
More informationOverview of Non-Destructive Testing and Inspection Course Syllabus
Overview of Non-Destructive Testing and Inspection Course Syllabus This course reviews the general principles of seven non-destructive testing methods and their derivative techniques The following class
More informationwww.gete-ndtjordan.com OUR SERVICES With this association, we are able to provide testing and Inspection service in all kind of Non- Destructive Testing for Oil and Gas industries. Including exploration,
More informationINTEGRATED NDT / INSPECTION, CONTRÔLE & CERTIFICATION
INTEGRATED NDT / INSPECTION, CONTRÔLE & CERTIFICATION Presentation I NDT Congo is an inspection company specialized in Non Destructive Testing of industrial equipment such as boilers, heat exchangers,
More informationNondestructive Testing
Nondestructive Testing Prof. A.K.M.B. Rashid Department of MME BUET, Dhaka Nondestructive inspections fundamentals Classification of nondestructive inspections Radiographic inspection Magnetic particle
More informationInnovative Solutions Solving the Problems of Industrial Inspection, Maintenance and Repair
Innovative Solutions Solving the Problems of Industrial Inspection, Maintenance and Repair 4127 Hollister St., Suite A Houston Ph: (713) 460-4001 Fax: (713) 996-7752 www.mhtgroup.net Texas 77080 MHT Company
More informationLooking sharp at your assets
Looking sharp at your assets A longer life The stands for Quality The consists of three specialised operating companies with their own divisional structure. Material testing, inspection and corrosion prevention
More informationSpecialist Services for Energy Infrastructure
Specialist Services for Energy Infrastructure Company Profile From its bases across the UK and its international hubs, Glacier Energy Services provides products, services and engineered solutions in the
More informationTo eliminate. Our services. Insulation Hot & Cold. Acoustic Insulation. Asbestos Solutions. Access & Scaffolding. Rope Access the energy waste
KAEFER at a glance KAEFER AT A GLANCE 03 Our services To eliminate Insulation Hot & Cold Acoustic Insulation Asbestos Solutions Access & Scaffolding Rope Access the energy waste Scaffold Design Surface
More informationINTRODUCTION. Total Solutions Middle East Total Solutions M.E. total. Corporate. P r ofile. Services
Oil & Gas Directory Middle East - 2013 169 INTRODUCTION provide dedicated services and applications for buildings, structures, rigs, pipelines and construction sites, specialising in the following: Rope
More informationPSL/26 ISSUE 13 PCN CERTIFICATION AVAILABLE. Certification Services Division Newton Building, St George s Avenue Northampton, NN2 6JB
Certification Services Division Newton Building, St George s Avenue Northampton, NN2 6JB Tel: +44(0)1604-893-811. Fax: +44(0)1604-893-868. E-mail: pcn@bindt.org PSL/26 ISSUE 13 PCN CERTIFICATION AVAILABLE
More informationHigher National Unit Specification. General information for centres. Unit code: DR26 34
Higher National Unit Specification General information for centres Unit title: Inspection Systems Unit code: DR26 34 Unit purpose: This Unit is designed to enable candidates to develop knowledge and understanding
More informationASTM Volume 03.03, October 2017 Nondestructive Testing (E94 E2373)
Table of Contents 1 E94-04(2010) Standard Guide for Radiographic Examination 2 E114-15 Standard Practice for Ultrasonic Pulse-Echo Straight-Beam Contact Testing 3 E125-63(2013) Standard Reference Photographs
More informationAdvanced Inspection of Steel Elements
Advanced Inspection of Steel Elements Methods of Inspection Level II inspection in steel elements is made if cracks or potential for cracks or faults is present. Visual Important for detecting degradation
More informationDevelopments in the Use of New Technology for Surveys/Inspections Regime
Tripartite 2016 Meeting Developments in the Use of New Technology for Surveys/Inspections Regime 14 Oct. 2016 Tokyo, Japan 1 Advanced NDT Technology Remote Inspection Technique Other Technology Look into
More informationRecent Advances in NDE Technologies for Turbines and Generators
17th World Conference on Nondestructive Testing, 25-28 Oct 2008, Shanghai, China Recent Advances in NDE Technologies for Turbines and Generators Waheed A. ABBASI, Michael J. METALA SIEMENS Energy Service
More informationFABRIC MAINTENANCE & ACCESS SOLUTIONS
FABRIC MAINTENANCE & ACCESS SOLUTIONS Your expert provider of intelligent fabric maintenance plans specific to your assets life expectancy WWW.STORK.COM 1 Stork has a proven track record, with over 40
More informationTOHAMA Co. Profile البصرة-حي المهندسين-مجاور شركة المرابع الخضراء
TOHAMA Co. Profile 2017 E-Mail:tohamainspection@gmail.com البصرة-حي المهندسين-مجاور شركة المرابع الخضراء Co. Name : TOHAMA For Engineering Inspection Co. Head office : Basrah Iraq E-mail : tohamainspection@gmail.com
More informationPulsed Eddy Current Testing (PECT) Inspection Technique
Introduction Pulsed Eddy Current Testing (PECT) is an inspection technique used for corrosion under insulation (CUI) screening on carbon steel structures as pipes, vessels, tanks and spherical tank legs
More informationRAE Offshore PO Box 4930, Sheffield S8 2JU Office: Portergate, 257 ecclesall Rd, Sheffield, United Kingdom, S11 8nx Telephone: +44 (0)
10053518 RAE Offshore PO Box 4930, Sheffield S8 2JU Office: Portergate, 257 ecclesall Rd, Sheffield, United Kingdom, S11 8nx Telephone: +44 (0) 1142 096 284 Fax: +44 (0) 1142 096 001 Email: enquiries@raeoffshore.com
More informationGas Holder Tank Maintenance, Design, Fabrication & Installation
Pipework Maintenance, Design, Fabrication & Installation Structural Steelwork Maintenance, Design, Fabrication & Installation Gas Holder Tank Maintenance, Design, Fabrication & Installation Under Pressure
More informationYOUR SINGLE-SOURCE INDUSTRIAL SERVICE PROVIDER
BUSINESS OVERVIEW 2 AND BUSINESS PHILOSOPHY Southey is a leader in providing fabric maintenance, insulation, repair and maintenance services to clients throughout Africa and the Middle East. These services
More informationISO Non-destructive testing of welds Ultrasonic testing Use of automated phased array technology
INTERNATIONAL STANDARD ISO 13588 First edition 2012-10-01 Non-destructive testing of welds Ultrasonic testing Use of automated phased array technology Contrôle non destructif des assemblages soudés Contrôle
More informationFast Corrosion Screening Technique Saturation Low Frequency Eddy Current
Summary The inspection of ferromagnetic and non-ferromagnetic material components is an attractive and efficient method due to its fast screening of large areas with low surface preparations. Already qualified
More informationPRECISION MACHINING & MANUFACTURING SERVICES
PRECISION MACHINING & MANUFACTURING SERVICES 03 The complete solution Proserv s Coatbridge facility is our Global Centre of Excellence (CoE) for the design, engineer, manufacture, repair and refurbishment
More informationWe are a global leader in engineering, project and technical services to industrial, energy, process and utility markets.
Industrial Services About us We are a global leader in engineering, project and technical services to industrial, energy, process and utility markets. 160+ Year history Current operational footprint $10bn
More informationFRAZIER RELIABILITY SOLUTIONS
(817) 416-4306 500 North Kimball Ave. Suite 103C Southlake, TX 76092 Frazier Reliability Solutions is a subsidiary of Frazier & Associates, Inc. Since 1996, Frazier Reliability Solutions has been providing
More informationPulsed Eddy-Current (PEC) Inspection through Insulation
INDUSTRIAL SERVICES WHITE PAPER PULSED EDDY CURRENT Pulsed Eddy-Current (PEC) Inspection through Insulation Method statement of an advanced non-destructive testing technique for inspection through insulation.
More informationIDENTIFYING FACTORY TESTS AND CERTIFICATIONS FOR ASME TANKS AND VESSELS. Factory Tests and Certifications for ASME Tanks and Vessels
IDENTIFYING FACTORY TESTS AND CERTIFICATIONS FOR ASME TANKS AND VESSELS Discover How Factory Tests are Conducted and the Documentation Required for ASME Compliance Factory Tests and Certifications for
More informationSpecialized Industrial Service Needs
Solutions for your Specialized Industrial Service Needs TEAM Industrial Services (TEAM) is the worldwide leader in minimizing equipment and asset downtime and maximizing performance by providing critical
More informationJames Fisher Prolec. Leading construction equipment safety and productivity solutions.
James Fisher Prolec Leading construction equipment safety and productivity solutions. Assure safety, optimise performance and increase productivity with JF Prolec s construction machinery solutions. Trusted
More informationSTRONGER SMARTER STRONGER SAFER
No.41 Senoko Way Singapore 758053 Hotline: (65) 6755 7600 Fax: (65) 6753 7656 Email: pollisum@singnet.com.sg www.pollisum.com STRONGER SMARTER STRONGER SAFER SMARTER in being innovative and productive
More informationPART 6: Visual and Optical Inspector Level 1, 2 and 3
CERTIFICATION SCHEME FOR PERSONNEL DOCUMENT No. CSWIP-ISO-NDT-11/93-R Requirements for the Certification of Personnel Engaged in Non- Destructive Testing in accordance with the requirements of BS EN ISO
More informationAnglo Eastern Industries FZE - Technical Services Division (AEI-TSD)
Anglo Eastern Industries FZE - Technical Services Division (AEI-TSD) Anglo Eastern Industries FZE, incorporated in 2004 and its Technical Services Division established recently, is a registered / corporate
More informationBUSINESS PHILOSOPHY SERVICE OFFERING EQUIPMENT PARTNERSHIPS LOKRING INTELLIGENT ENGINEERING DRONETEC WALKER TECHNICAL
SERVICE OVERVIEW 2 Southey Contracting provides solutions to improve, maintain and protect our clients plant and assets by providing specialised, innovative and mobile labour to our customers throughout
More informationSubsea Pipeline Inspection Riser Annulus Testing Riser Repair Subsea Structural Assessment and Life Extension Mooring Inspection & Monitoring
RusselSmith is an ISO 9001:2015 certified Integrated Oilfield Services provider, incorporated to serve the needs of the global oil and gas exploration and production industry. Our value proposition to
More informationSUPPLIER QUALITY SCOPE AND FACILITY QUESTIONNAIRE. Bantrel Co. Project #:
Bantrel Co. Project #: COMPLETED BY: DATE: SUPPLIER NAME: D & B NUMBER: CONTENTS 1.0 GENERAL INFORMATION 2.0 PERSONNEL 3.0 QUALITY PROGRAM 4.0 SUPPLIER / CONTRACTOR INFORMATION 5.0 SCOPE OF FABRICATION
More informationAWS B1.10:1999 An American National Standard. Guide for the Nondestructive Examination of Welds
AWS B1.10:1999 An American National Standard Guide for the Nondestructive Examination of Welds Key Words Guide, eddy current examination, magnetic particle examination, nondestructive examination, penetrant
More informationThe in-service inspection of coated steel welds using Eddy-Current Techniques
Journal of Physics: Conference Series The in-service inspection of coated steel welds using Eddy-Current Techniques To cite this article: B J Brown et al 2012 J. Phys.: Conf. Ser. 364 012064 Recent citations
More informationAXIOM NDT AND OFFSHORE SERVICES NDT AND INSPECTION - LIFTING - MAINTENANCE - SPECIALIST ACCESS OFFSHORE, MARINE AND RENEWABLES
AXIOM NDT AND OFFSHORE SERVICES NDT AND INSPECTION - LIFTING - MAINTENANCE - SPECIALIST ACCESS OFFSHORE, MARINE AND RENEWABLES www.axiomoffshore.co.uk Aberdeen Unit 3, Burnbank Business Units Souterhead
More informationBODY OF KNOWLEDGE API-653 ABOVEGROUND STORAGE TANK INSPECTOR CERTIFICATION EXAMINATION
BODY OF KNOWLEDGE API-653 ABOVEGROUND STORAGE TANK INSPECTOR CERTIFICATION EXAMINATION October 2009 (Replaces November 2008) API Authorized Aboveground Storage Tank Inspectors must have a broad knowledge
More informationNDE Requirements Of In-Service Inspection Codes
National Seminar & Exhibition on Non-Destructive Evaluation, NDE 2014, Pune, December 4-6, 2014 (NDE-India 2014) Vol.20 No.6 (June 2015) - The e-journal of Nondestructive Testing - ISSN 1435-4934 www.ndt.net/?id=17892
More informationNONDESTRUCTIVE EVALUATION: POSITIVE CONTRIBUTIONS TO SAFETY, RELIABILITY, AND ECONOMICS
NONDESTRUCTIVE EVALUATION: POSITIVE CONTRIBUTIONS TO SAFETY, RELIABILITY, AND ECONOMICS Lisa Brasche, Associate Director lbrasche@iastate.edu Center for Nondestructive Evaluation Iowa State University
More informationINTRODUCTION MEGARME 3.30 MEGARME BENEFITS OF SPECIALIST ACCESS.. Don t Count The Cost, Count the Savings...
Oil & Gas Directory Middle East - 2013 175 INTRODUCTION Don t Count The Cost, Count the Savings... THE COMPANY Since 1993 Megarme has been providing rope access services Gulf wide to our loyal and extensive
More informationDESTEC ON-SITE SERVICES
DESTEC ON-SITE SERVICES DESTEC ON-SITE SERVICES Destec engineering has specialised in on-site machining for over 30 years. Our wide range of versatile in-house designed and manufactured portable machine
More informationOverview of NDT Methods
IIM Hyderabad 15th July 2016 Overview of NDT Methods K Kapoor DGM(QA), NFC, Hyderabad Interruption in Normal Physical Structure - Keyways, Grooves, Holes present by design Discontinuity Flaw Defect Discontinuity
More informationCorrosion Under Insulation Detection Methods and Inspection
Corrosion Under Insulation Detection Methods and Inspection June 18, 2013 NACE Section Meeting James Higgins PetroChem Inspection OVERVIEW General causes of CUI Suspect Areas- how to find and where to
More informationARISE GLOBAL PTE LTD ADVANCED NDT & INSPECTION SERVICES
ARISE GLOBAL PTE LTD ADVANCED NDT & INSPECTION SERVICES CONTENTS: What do we do? Arise Global, a member of the Arise Global group of companies, is a Singapore-based operating service provider with focus
More informationBelow the Surface: The Importance of Mechanical Integrity at Your Plant. ERI Solutions Inc. All Rights Reserved.
Below the Surface: The Importance of Mechanical Integrity at Your Plant Introduction ERI Solutions Inc. (ERI) founded in 2003 to develop insurance markets and standards for the growing ethanol industry.
More informationBreak down of traceability or Quality Chain in Non Destructive Testing to International Standards
SINCE2011 Singapore International NDT Conference & Exhibition, 3-4 November 2011 Break down of traceability or Quality Chain in Non Destructive Testing to International Standards Sajeesh Kumar BABU * 1,
More informationPART 3: Liquid Penetrant Inspector, Level 1, 2 and 3
CERTIFICATION SCHEME FOR PERSONNEL Document No. CSWIP-ISO-NDT-11/93-R Requirements for the Certification of Personnel Engaged in Non- Destructive Testing in accordance with the requirements of BS EN ISO
More informationPredictive Maintenance (PdM) & Proactive Maintenance (PAM) Dr. Khaleel Abushgair
Predictive Maintenance (PdM) & Proactive Maintenance (PAM) ۱ Predictive Maintenance (PdM) Also known as Condition- Based Maintenance. Uses non-intrusive testing techniques, visual inspection and performance
More informationISO INTERNATIONAL STANDARD. Non-destructive testing of welds Eddy current testing of welds by complex-plane analysis
INTERNATIONAL STANDARD ISO 17643 First edition 2005-07-01 Non-destructive testing of welds Eddy current testing of welds by complex-plane analysis Contrôle non destructif des assemblages soudés Contrôle
More informationAPC Corrosion & Thickness Monitoring Solution
APC Corrosion & Thickness Monitoring Solution with A 3 M spoton U Permanently-installed real-time internal corrosion and erosion monitoring solution designed to operate in most environments and locations.
More information1. Comparison of Inspection Methods
NDT.net - The e-journal of Nondestructive Testing (May 2008) For more papers of this publication click: www.ndt.net/search/docs.php3?mainsource=25 Weld Inspection with EMAT Using Guided Waves Borja LOPEZ
More informationUSM Vision 1.2 A Total Weld Inspection Solution to Increase Productivity in New Process Pipework Fabrication
GE Measurement & Control NEW USM Vision 1.2 A Total Weld Inspection Solution to Increase Productivity in New Process Pipework Fabrication 16/128 Parallel scanning Linear scan More channels Introduction
More informationHull Surveys for Liquefied Gas Carriers
(May 2007) (Rev.1 Nov 2007) (Rev.2 Mar 2009) (Rev.3 July 2011) Hull Surveys for Liquefied Gas Carriers CONTENTS 1. General 1.1 Application 1.2 Definitions 1.3 Repairs 1.4 Thickness measurements and close-up
More informationPipeline Systems PIP PLSC0013 Non-Destructive Examination of ASME B31.4 and B31.8 Metallic Pipelines
February 2017 Pipeline Systems PIP PLSC0013 Non-Destructive Examination of ASME B31.4 and B31.8 Metallic Pipelines PURPOSE AND USE OF PROCESS INDUSTRY PRACTICES In an effort to minimize the cost of process
More information1.0 INTRODUCTION GENERAL SUPPLIER S RESPONSIBILITY CODES AND STANDARDS... 4
TABLE OF CONTENTS 1.0 INTRODUCTION... 3 1.1 GENERAL... 3 1.2 SUPPLIER S RESPONSIBILITY... 3 2.0 CODES AND STANDARDS... 4 2.1 CODES, STANDARDS AND REGULATIONS... 4 2.2 NEPTUNE ENERGY NETHERLANDS B.V. SPECIFICATIONS...
More informationSpecification for the Fabrication of Tower Structures
Ergon Energy Corporation Limited Specification for the Fabrication of Tower Structures This material is made available on the basis that it may be necessary for a Registered Professional Engineer of Queensland
More informationLIGHTWEIGHT SERVICE CRANE WORLDWIDE HEAVY TRANSPORTATION AND LIFTING
LIGHTWEIGHT SERVICE CRANE WORLDWIDE HEAVY TRANSPORTATION AND LIFTING TOGETHER, WE ARE... Our people are at the heart of ALE s business: dedicated professionals who work with our clients to achieve the
More informationAXIOM NDT AND OFFSHORE SERVICES NDT AND INSPECTION - LIFTING - MAINTENANCE - SPECIALIST ACCESS OFFSHORE, MARINE AND RENEWABLES
AXIOM NDT AND OFFSHORE SERVICES NDT AND INSPECTION - LIFTING - MAINTENANCE - SPECIALIST ACCESS OFFSHORE, MARINE AND RENEWABLES www.axiomoffshore.co.uk Aberdeen Unit 3, Burnbank Business Units Souterhead
More informationOther Major Component Inspection I. NDE for Preventing Radioactive Nuclides into Groundwater N. Muthu, EPRI, USA
6th International Conference on NDE in Relation to Structural Integrity for Nuclear and Pressurized Components October 2007, Budapest, Hungary For more papers of this publication click: www.ndt.net/search/docs.php3?mainsource=70
More informationAWS B1.10M/B1.10:2009 An American National Standard. Guide for the Nondestructive Examination of Welds
An American National Standard Guide for the Nondestructive Examination of Welds An American National Standard Approved by the American National Standards Institute July 1, 2009 Guide for the Nondestructive
More informationQUALIFICATION AND APPLICATION OF IN-SERVICE INSPECTION OF VVER-440 CONTROL ROD DRIVE PROTECTION PIPES
QUALIFICATION AND APPLICATION OF IN-SERVICE INSPECTION OF VVER-440 CONTROL ROD DRIVE PROTECTION PIPES Krunoslav Markulin, Matija Vavrous INETEC-Institute for Nuclear technology, Croatia Jani Pirinen, Petri
More information36A0 INSPECTION Stephan Falter, Baker Hughes, a GE company, Germany,
A 360 INSPECTION Stephan Falter, Baker Hughes, a GE company, Germany, details how innovations can enhance confidence in the operational integrity of seamless tube and pipe. S eamless tube and pipe is widely
More informationCP25 ANNEX A - GENERAL SPECIFICATION FOR VISUAL TESTING
Certification Services Division Midsummer House Riverside Way, Bedford Road Northampton, NN1 5NX United Kingdom Tel: +44(0)1604-438-300. Fax: +44(0)1604-438-301. E-mail: pcn@bindt.org CP25 ANNEX A - GENERAL
More informationFurmanite s engineered composite repair technology
Introducing Furmanite s engineered composite repair technology Dr Paul Hill CEng Director Furmanite Center of Excellence Composite Repairs Corporate Headquarters: Furmanite Worldwide Inc. 2435 North Central
More informationDACON INSPECTION SERVICES PIPELINE INSPECTION SERVICES
PIPELINE INSPECTION SERVICES Who we are Conventional and Advanced NDT and Inspection Services Oil and Gas, Refinery, Petrochemical, Heavy Industry, Mining Over 400 personnel including more than 300 inspectors
More informationAssured Joint Integrity
Assured Joint Integrity All leaks cost Loss of containment can have catastrophic results and negatively impact brand image, facilities, employees, and the environment. Unplanned shutdowns at hydrocarbon
More informationGridin's Group certificates NON-DESTRUCTIVE TESTING
Gridin's Group certificates ABOUT US Gridin s Group, has been successfully providing non-destructive testing services in various industrial sectors since 2004. The main activity of the company is non-destructive
More informationK. ASTM F436- Standard Specification for Hardened Steel Washers; 2011.
DIVISION 05 METALS 05 12 00 STRUCTURAL STEEL FRAMING PART 1 GENERAL 1.1 SECTION INCLUDES A. Structural steel framing members, support members. 1.2 RELATED REQUIREMENTS A. Section 05 50 00 - Metal Fabrications:
More informationMachining, Bolting and Flange Management
Machining, Bolting and Flange Management www.storktechnicalservices.com 02 03 04 05 08 09 10 11 introduction overview machining & bolting hot bolt replacement pipe cutting in-situ machining IBOLT FLANGE
More informationSIMPLIFYING PIPELINE INSPECTION. THE INTEGRATION OF ADVANCED EDDY CURRENT SENSORS ONTO CONVENTIONAL FOAM PIGS. By: Steve Banks i2i Pipelines Ltd UK
SIMPLIFYING PIPELINE INSPECTION. THE INTEGRATION OF ADVANCED EDDY CURRENT SENSORS ONTO CONVENTIONAL FOAM PIGS. Abstract By: Steve Banks i2i Pipelines Ltd UK Pigging tools for pipelines are typically dominated
More informationThis document is a preview generated by EVS
INTERNATIONAL STANDARD ISO 13847 Second edition 2013-12-15 Petroleum and natural gas industries Pipeline transportation systems Welding of pipelines Industries du pétrole et du gaz naturel Conduites pour
More informationDEVELOPMENT AND DEPLOYMENT OF BOTTOM MOUNTED INSTRUMENTATION (BMI) NOZZLE INSPECTION
More Info at Open Access Database www.ndt.net/?id=18565 DEVELOPMENT AND DEPLOYMENT OF BOTTOM MOUNTED INSTRUMENTATION (BMI) NOZZLE INSPECTION 0. ABSTRACT O. Burat, M. Taglione, F. Jacquinot, AREVA, France
More informationPART 2: Magnetic Particle Inspector, Level 1, 2 and 3
CERTIFICATION SCHEME FOR PERSONNEL DOCUMENT No. CSWIP-ISO-NDT-11/93-R Requirements for the Certification of Personnel Engaged in Non- Destructive Testing in accordance with the requirements of BS EN ISO
More informationPERATIONS, AINTENANCE MODIFICATIONS
PERATIONS, AINTENANCE MODIFICATIONS STORK IS THE EXPERT PROVIDER OF INTEGRATED OPERATIONS, MAINTENANCE AND MODIFICATIONS SUPPORT SERVICES TO THE GLOBAL OIL & GAS ENERGY INDUSTRIES. ASSET INTEGRITY PARTNER
More informationwww.durhamlifting.co.uk A WEALTH OF TECHNICAL EXPERTISE COMBINED WITH INVESTMENT INTO OUR COMPREHENSIVE NORTH EAST CAPABILITIES, ENSURE WE CONTINUE TO SET THE PACE WITHIN OUR SECTOR. Founded in 1996, Durham
More informationNON-DESTRUCTIVE TESTING
CLASSIFICATION NOTES No. 7 NON-DESTRUCTIVE TESTING MAY 2011 This Classification Note includes all amendments and corrections up to June 2011. The content of this service document is the subject of intellectual
More informationAUTOMATED ULTRASONIC TESTING PA & TOFD
ATIC ADVANCED NDT SERVICES AUTOMATED ULTRASONIC TESTING OF CROSS COUNTRY PIPELINE (AUT) PHASED ARRAY (PA) ULTRASONIC TESTING TIME OF FLIGHT DIFFRACTION TESTING (TOFD) ECT, RFT, MFL TUBE INSPECTION INTERNAL
More informationImproved Inspection of CRA-Clad Pipe Welds with Accessible Advanced Ultrasonic Phased-Array Technology
19 th World Conference on Non-Destructive Testing 2016 Improved Inspection of CRA-Clad Pipe Welds with Accessible Advanced Ultrasonic Phased-Array Technology André Lamarre 1 1 Olympus Scientific Solutions
More informationMETAL PRODUCTS PIPELINE ENGINEERING. Engineered Products for the Pipeline Pigging and Flow Assurance Industry
METAL PRODUCTS 1 2 3 PIPELINE ENGINEERING Engineered Products for the Pipeline Pigging and Flow Assurance Industry Engineered Products for the Pipeline Pigging and Flow Assurance Industry Pipeline Engineering
More informationTekla structures sails ahead on offshore projects
Tekla structures sails ahead on offshore projects Offshore solutions made efficient with Tekla software We have recently used Tekla structures on two offshore projects, Leman Alpha ICCP Project and Boat
More informationISO 9001:2015Certified
ISO 9001:2015Certified Introduction MCCS commenced business in 1993 as a small UK based Mechanical Completion and Commissioning company working mainly in the North Sea and Southern Europe on various projects
More informationWelcome to. FORCE Technology
Welcome to FORCE Technology Eddy Current Inspection Tube inspection and analyses Fast automated inspection Optimized inspection Steel, stainless steel, etc. Eddy Current Inspection Tube inspection and
More informationSub-surface inspection of welds No. 6.03
Sub-surface inspection of welds Scope This Guidance Note applies to all welds in structural steelwork for bridges. It covers the sub-surface inspection of welds using ultrasonic inspection testing and
More informationYour Guarantee of Safety and Reliability.
Contacts with a wealth of experience General Managers DEKRA Industrial: Jörgen Backersgård, Matti Andersson and Werner Bollmann. Your Guarantee of Safety and Reliability. How we put you on the safe side
More informationExperience the Benefits
Experience the Benefits Real time sensory technology and expert consultancy from SMS Cost Reduction Enhanced Safety Increased Production Performance Providing award winning expertise - making a genuine
More informationCommon Operating Problems
SYDNEY Pressure Vessels Field Manual Common Operating Problems and Practical Solutions Maurice Stewart Oran T. Lewis AMSTERDAM BOSTON HEIDELBERG LONDON NEW YORK OXFORD PARIS SAN DIEGO SAN FRANCISCO SINGAPORE
More informationSECTION GROUND STORAGE TANK
SECTION 13210 GROUND STORAGE TANK PART 1 GENERAL 1.01 Summary A. Section Includes: Provision for welded steel storage tank design, fabrication, construction and erection, including tank accessories. B.
More informationKey activities and performance highlights. History
NON DESTRUCTIVE TESTING HEAT TREATMENTS INSPECTION OF INDUSTRIAL PLANTS COMPANY OUTLINE History Italsabi is a company specialized in Non Destructive Testing and Heat Treatments for structural integrity
More informationA NEW VALVE BRAND WITH A LOT OF EXPERIENCE BEHIND
A NEW VALVE BRAND WITH A LOT OF EXPERIENCE BEHIND C O M P A N Y P R O F I L E Established in 1968. With the support of the new valve team our aim are short lead times, exemplary quality and good customer
More informationassuring SAFETY constructing QUALITY
assuring SAFETY constructing QUALITY TERAJU Inspection and Engineering Services Sdn Bhd (TERAJU) was founded in year 2013 as Malaysian Private Limited company with he core business of oilfield inspection
More informationDrone inspection - high resolution images and video
Non-destructive testing Drone inspection - high resolution images and video Our drone inspection solutions provide high resolution images and video of otherwise inaccessible areas of your facility. Drone
More informationUpstream Midstream Downstream
Upstream Midstream Downstream We Are Your Single Source Solution Provider. Main Headquarters: 1084 Cruse Ave., Broussard, LA 70518 Corporate Office: 1300 West Sam Houston Parkway South, Suite 345, Houston,
More informationEngineering Materials
Engineering Materials Module 3: Destructive and Non- Destructive Testing PREPARED BY IAT Curriculum Unit August 2010 Institute of Applied Technology, 2010 2 Module 3: Destructive and Non-Destructive Testing
More information