Handbook Of Electronics Packaging Design and Engineering
|
|
- Dana Gordon
- 6 years ago
- Views:
Transcription
1 Handbook Of Electronics Packaging Design and Engineering
2 Handbook Of Electronics Packaging Design and Engineering Second Edition BERNARD s. MATISOFF, P.E., CMfgE ~ VAN NOSTRAND REINHOLD ~ NewYork
3 Copyright 1990 by Van Nostrand Reinhold Softcover reprint of the hardcover 1st edition 1990 Library of Congress Catalog Card Number ISBN-13: All rights reserved. Certain portions of this work 1982 by Van Nostrand Reinhold. No part of this work covered by the copyright hereon may be reproduced or used in any form or by any means-graphic, electronic, or mechanical, including photocopying, recording, taping, or information storage and retrieval systems-without written permission of the publisher. Van Nostrand Reinhold 115 Fifth Avenue New York, New York Van Nostrand Reinhold International Company Limited 11 New Fetter Lane London EC4P 4EE, England Van Nostrand Reinhold 480 La Trobe Street Melbourne, Victoria 3000, Australia Nelson Canada 1120 Birchmount Road Scarborough, Ontario MIK 5G4, Canada Library of Congress Cataloging-in-Publication Data Matisoff, Bernard S. Handbook of electronics packaging design and engineering/by Bernard S. Matisoff.-2nd ed. p. cm. Includes index. ISBN-13: e-isbn-13: DOl: / Electronic packaging-handbooks, manuals, etc. I. Title. TK7870.M '54-dc CIP
4 PREFACE TO THE SECOND EDITION The degree of sophistication throughout the electronics industry is increasing dramatically each year. More functions and higher speeds are being packaged into smaller and smaller packages. The need for miniaturization, higher reliability, and competitive pricing has pushed product design far beyond the limitations of the conventional technology, and has necessitated the development of new packaging methods. The electronics packaging engineer has assumed a new role in modem electronics manufacturing. The packaging engineer no longer exists merely to design a "can" over the circuitry, but rather to insure that the final product meets the severe operational environments, cost restrictions, and reliability standards of the industry. The new packaging engineer will be the key to the success of the product and the future of the company. The close tolerances required for automatic-placement equipment are more difficult for manufactures to achieve, and soldering and cleaning can become problems since they can cause thermal, material and process problems. Since both the manufacturing processes and the applications environments must be considered in selecting the manufacturing methods, materials, and parts, the designers must pay close attention to the product specifications and the methods employed in production. In the second edition of this book I have added a number of new chapters that will provide the data needed by the busy designer and packaging engineer in their daily design tasks. It is intended that as mach of the standard information required in the design function be made available in this single source as a means of reducing the engineers' and designers' lost time searching for data. BERNARD S. MATISOFF, P.E., CMFGE v
5 PREFACE TO THE FIRST EDITION The Handbook of Electronics Packaging Design and Engineering has been written as a reference source for use in the packaging design of electronics equipment. It is designed to provide a single convenient source for the solution of recurring design problems. The primary consideration of any design is that the end product meet or exceed the applicable product specifications. The judicious use of uniform design practices will realize the following economies and equipment improvements: Economics of design. Uniform design practices will result in less engineering and design times and lower costs. They will also reduce the number of changes that may be required due to poor reliability, maintainability, or producibility. Improved design. Better designs with increased reliability, maintainability, and producibility will result from the use of uniform design practices. Production economies. Uniform designs employing standard available tools, materials, and parts will result in the cost control of manufacturing. The Handbook is intended primarily for the serious student of electronics packaging and for those engineers and designers actively engaged in this vital and interesting profession. It attempts to present electronics packaging as it is today. It can be used as a training text for instructional purposes and as a reference source for the practicing designer and engineer. During my years as an engineer involved in all the phases of electronics packaging-both design and manufacturing-i have attempted to review carefully all books and articles published on this subject. One characteristic seems common to most of them: an overemphasis of the theoretical. Obviously, comprehensive coverage of theory is needed. Moreover, there is also a need for a book that separates practical and applicable information from the vast field of theory and presents it in a readily accessible format. The theoretical presentations herein are considered sufficient (1) for the routine solutions of the daily problems encountered and (2) for establishing the size and complexity of those problems so that the engineer or designer will know when the assistance of a specialized consultant is required. vii
6 viii PREFACE TO FIRST EDITION Today there are numerous techniques for packaging electronics systems, and due to the increasingly stringent customer requirements, their number continues to grow. Engineers can no longer simply document the components-they must select the most efficient packaging techniques as well. The physical attributes of electronics equipment are fast becoming recognized as significant in the performance and the reliability of contemporary systems. Practical applications of materials, processes, and components in the evaluation of electronics packaging can be made to yield a new order of performance and reliability at reasonable costs. Modern electronics equipment must be designed to function reliably in the specific environments defined by the intended applications. Extreme environments, characterized by mechanical shock and vibration, high temperatures, or radio-frequency interference, for example, will present many problems. To achieve the most efficient design, the engineer must review all of the requirements and generate a design plan that will provide the foundation for the product design. A systematic approach to any electronics packaging task must be taken. The engineer must consider all of the design parameters as well as their effect on each other. The basic design parameters to be considered in the early planning stages are: PhYSical Environmental Repairability and maintainability Manufacturability Appearance Economics Reliable performance depends on the ability of a structure to secure all parts and assemblies together in a good working relationship. The optimal system is obtained through judicious integration of the circuit design, structural techniques, component applications, heat transfer, and the vibrational dynamics within realistic operational requirements. The designer must be thoroughly familiar with the many processes and techniques available in order to fabricate parts at the lowest cost, as well as with the advantages and limitations of each of the processes. The parts and materials selected by the designer-and the method of assembly-must be capable of withstanding and functioning in the specified environments. All things are designed and constructed to extend human capability in some way. Therefore, the engineer must remember that humanity is the central reason for all designs. The design object is to provide people with the accessories they need to achieve a specified goal. BERNARD S. MATISOFF, P.E., CMFGE
7 CONTENTS Preface to Second Edition Preface to First Edition v vii 1 Electronics Packaging Design and Engineering 2 Project Planning 6 3 Human Factors Engineering 23 4 Fabrication Processes 64 5 Mechanical Fasteners Heat Transfer and Thermal Control Shock and Vibration Design Subassemblies and Assemblies Design Considerations for Space Electronics Material Plating and Finishes Radio Frequency and Electromagnetic Shielding Design and Development of Miniature Electronics Systems Wire and Cabling Materials and Processes Safety 328 ix
8 x CONTENTS 16 Printed Circuits Electrical Interconnection Systems Forced Air Cooling Systems Preferred Materials for Electronic Packaging Selection of Plastics for Various Environments Mechanics of Simple Stresses Formulas and Conversions Design Reviews-An Instrument for Decision Making Slide Mount Considerations for Electronic Assemblies Reference Designations for Electrical and Electronic Parts and Equipment Metal Alloy and Temper Designation Systems 511 Appendix A 535 Appendix B 578 Index 647
ENVIRONMENTAL AND FUNCTIONAL ENGINEERING OF AGRICULTURAL BUILDINGS
ENVIRONMENTAL AND FUNCTIONAL ENGINEERING OF AGRICULTURAL BUILDINGS ENVIRONMENTAL AND FUNCTIONAL ENGINEERING OF AGRICULTURAL BUILDINGS H. J. BARRE The Ohio State University Columbus, Ohio L. L. SAMMET University
More informationContamination Control and Cleanrooms
Contamination Control and Cleanrooms Contamination Control and Cleanrooms Problems, Engineering Solutions, and Applications Alvin Lieberman ~ VAN NOSTRAND REINHOLD ~ New York Copyright 1992 by Van Nostrand
More informationNo-Tillage Agriculture. Principles and Practices
No-Tillage Agriculture Principles and Practices No-Tillage Agriculture Principles and Practices Edited by Ronald E. Phillips Department of Agronomy Shirley H. Phillips Associate Director for Extension
More informationFlexible Food Packaging. Questions and Answers
Flexible Food Packaging Questions and Answers Flexible Food Packaging Questions and Answers Arthur Hirsch, Ph. D., FAIC ~ SPRINGER SCIENCE+BUSINESS MEDIA, LLC Copyright 1991 by Springer Science+Business
More informationThe Construction Superintendent's Handbook
The Construction Superintendent's Handbook The Construction Superin tendent' s Handbook Sidney M. Levy ~ VAN NOSTRAND REINHOLD ~ New York Copyright 1992 by Van Nostrand Reinhold Softcover reprint of the
More informationMACHINABILITY OF ENGINEERING MATERIALS
MACHINABILITY OF ENGINEERING MATERIALS Machinability of Engineering Materials B. MILLS B.SC., M.Sc., Ph.D., C.Eng., F.LM., M.Inst.P. and A. H. REDFORD B.Sc., Ph.D., A.R.T.C.S. Department of Aeronautical
More informationAQUACULTURE MANAGEMENT
AQUACULTURE MANAGEMENT AQUACULTURE MANAGEMENT James W. Meade AnaviBook Published by Van Nostrand Reinhold New York An AVI Book (AVI is an imprint of Van Nostrand Reinhold) Copyright 1989 by Van Nostrand
More informationThe Behavior of Thin Walled Structures: Beams, Plates, and Shells
The Behavior of Thin Walled Structures: Beams, Plates, and Shells MECHANICS OF SURFACE STRUCTURES Editors: W. A. Nash and G. /E. Oravas I. P. Seide, Small Elastic Deformations of Thin Shells. 1975 ISBN
More informationAn Introduction to Trenchless Technology
An Introduction to Trenchless Technology An Introduction to Trenchless Technology Steven R. Kramer William J. McDonald James C. Thomson m CHAPMAN & HALL New York London DISCLAIMER-LEGAL NOTICE This book
More informationInternational Marketing
0 0 0 0 International Marketing Marketing is a universal activity, regardless of the political, social, or economic systems of a particular country. However, this doesn t mean that consumers in different
More informationStructural Design Guide to the
Structural Design Guide to the Building Code Structural Design Guide to the Building: Code Edward S. Hoffman President Edward S. Hoffman, Ltd., Chicago, IL David P. Gustafson Vice President of Engineering
More informationElemen tary engineering fracture mechanics
Elemen tary engineering fracture mechanics Elementary engineering fracture mechanics DAVID BROEK 1982 MARTINUS NIJHOFF PUBLISHERS THE HAGUE/BOSTON/LONDON Distributors: for the United States and Canada
More informationLimit States Design in Structural Steel
Limit States Design in Structural Steel by G.L. Kulak, P.Eng. Professor Emeritus and G.Y. Grondin, P.Eng. Professor Department of Civil and Environmental Engineering University of Alberta Edmonton, Alberta
More informationMaterials Research and Engineering Edited by B. Ilschner and N.J. Grant
Materials Research and Engineering Edited by B. Ilschner and N.J. Grant Julian Szekely Goran Carlsson Lars Helle Ladle Metallurgy With 137 Figures and 24 Tables Springer-Verlag New York Berlin Heidelberg
More informationBioprocessing. Owen P. Ward SPRINGER SCIENCE+BUSINESS MEDIA, LLC
Bioprocessing Bioprocessing Owen P. Ward SPRINGER SCIENCE+BUSINESS MEDIA, LLC First published in 1991 by Copyright Owen P. Ward 1991 Originally published by Van Nostrand Reinhold in 1991 Softcover reprint
More informationSTRUCTURAL STABILITY OF STEEL: CONCEPTS AND APPLICATIONS FOR STRUCTURAL ENGINEERS
STRUCTURAL STABILITY OF STEEL: CONCEPTS AND APPLICATIONS FOR STRUCTURAL ENGINEERS Structural Stability of Steel: Concepts and Applications for Structural Engineers Theodore V. Galambos Andrea E. Surovek
More informationRECENT ADVANCES IN STRUCTURAL JOINTS AND REPAIRS FOR COMPOSITE MATERIALS
RECENT ADVANCES IN STRUCTURAL JOINTS AND REPAIRS FOR COMPOSITE MATERIALS Recent Advances in Structural Joints and Repairs for Composite Materials Edited by LIYONGTONG School of Aerospace, Mechanical and
More informationMANAGEMENT OF TECHNOLOGY
MANAGEMENT OF TECHNOLOGY MANAGEMENT OF TECHNOLOGY Managing Effectively in Technology-Intensive Organizations Hans J. Thamhain This book is printed on acid-free paper. Copyright 2005 by John Wiley & Sons,
More informationCHANNEL CATFISH FARMING HANDBOOK CRAIG S. TUCKER AND EDWIN H. ROBINSON. Mississippi State University. Springer Science + Business Media, lle
CHANNEL CATFISH FARMING HANDBOOK CRAIG S. TUCKER AND EDWIN H. ROBINSON Mississippi State University Springer Science + Business Media, lle Mention of a trademark or proprietary product does not constitute
More informationPlastic Forming Processes
Plastic Forming Processes Plastic Forming Processes Maurice Reyne First published in France in 2006 by Hermes Science/Lavoisier entitled: Transformations, assemblages et traitements des plastiques First
More informationAn Introduction to the Engineering of Fast Nuclear Reactors
An Introduction to the Engineering of Fast Nuclear Reactors This book is a resource for both graduate-level engineering students and practicing nuclear engineers who want to expand their knowledge of fast
More informationMarket Response Models: Econometric and Time Series Analysis
Market Response Models: Econometric and Time Series Analysis International Series in Quantitative Marketing Editor: Jehoshua Eliashberg The Wharton School University of Pennsylvania Philadelphia, Pennsylvania,
More informationQuality Assurance Management
Quality Assurance Management Michael J. Fox Associate Consultant University of Paisley Quality Centre Associate Tutor Durham University Business School SPRINGER-SCIENCE+BUSINESS MEDIA, B.V. First edition
More informationLOW-ENERGY FPGAs - ARCHITECTURE AND DESIGN
LOW-ENERGY FPGAs - ARCHITECTURE AND DESIGN THE KLUWER INTERNATIONAL SERIES IN ENGINEERING AND COMPUTER SCIENCE LOW-ENERGY FPGAs - ARCHITECTURE ANDDESIGN by Varghese George STMicroelectronics and Jan M.
More informationAlso in this series: In preparation: FORESTRY SCIENCES
FOREST BIOMASS FORESTRY SCIENCES Also in this series: Prins CFL ed: Production, Marketing and Use of Finger-Jointed Sawnwood. ISBN 90-247-2569-0 Oldeman RAA, et al. eds: Tropical Hardwood Utilization:
More informationEngineering Hydrology
Engineering Hydrology Engineering Hydrology E. M. WILSON, PH.D., M.SC., F.I.C.E. Department of Civil Engineering University of Salford Macmillan Education E. M. Wilson 1969 Softcover reprint of the hardcover
More informationPublic Sector Reformation
Public Sector Reformation This page intentionally left blank Public Sector Reformation Values-driven Solutions to Fiscal Constraint Ian Chaston Centrum Catolica, Peru; Moustraining Ltd, UK Ian Chaston
More informationPROCESS AND OPERATION PLANNING
PROCESS AND OPERATION PLANNING Process and Operation Planning Revised Edition of The Principles of Process Planning: A Logical Approach by Gideon Halevi Technion, Haifa, Israel... " SPRINGER-SCIENCE+BUSINESS
More informationSTATISTICAL SAMPLING AND RISK ANALYSIS IN AUDITING
STATISTICAL SAMPLING AND RISK ANALYSIS IN AUDITING Other books for auditors by Peter Jones: Combating Fraud and Corruption in the Public Sector, 1993, Chapman&Hall, London, ISBN 0412 46370 9 P C Jones
More informationTHE LIFETIME OF A DURABLE GOOD
THE LIFETIME OF A DURABLE GOOD THEORY AND DECISION LIBRARY General Editors: W. Leinfellner and G. Eberlein Series A: Philosophy and Methodology of the Social Sciences Editors: W. Leinfellner (Technical
More informationMarketing Communications in Tourism and Hospitality
Marketing Communications in Tourism and Hospitality This page intentionally left blank Marketing Communications in Tourism and Hospitality Concepts, Strategies and Cases Scott McCabe AMSTERDAM BOSTON HEIDELBERG
More informationElectronic Equipment Reliability
Electronic Equipment Reliability Other titles in Electrical and Electronic Engineering W. Gosling: A First Course in Applied Electronics B. A. Gregory: An Introduction to Electrical Instrumentation Paul
More informationInternational Dictionary of Marketing and Communication
International Dictionary of Marketing and Communication Other books by Frank Jefkins Advertising Advertising Made Simple Advertising Today (third edition) Communication in Industrializing Countries (with
More informationTHEORY OF THERMO MECHANICAL PROCESSES IN WELDING
THEORY OF THERMO MECHANICAL PROCESSES IN WELDING Theory of Thermomechanical Processes in Welding by Andrzej Sluzalec Technical University of Czestochowa. Poland ~ Springer A C.I.P. Catalogue record for
More informationEntrepreneurial Marketing for SMEs
Entrepreneurial Marketing for SMEs This page intentionally left blank Entrepreneurial Marketing for SMEs Luca Cacciolatti University of Westminster, UK and Soo Hee Lee University of Kent, UK Luca Cacciolatti
More informationHow to Estimate with. RSMeans Data
How to Estimate with RSMeans Data How to Estimate with RSMeans Data Basic Skills for Building Construction Fourth Edition RSMeans and Saleh A. Mubarak, Ph.D. Barbara Balboni, Technical Editor RSMeans
More informationVirginia Existing Building Code
2015 Virginia Existing Building Code 2015 Virginia Existing Building Code First Printing: September 2018 ISBN: 978-1-60983-852-2 COPYRIGHT 2018 by INTERNATIONAL CODE COUNCIL, INC. ALL RIGHTS RESERVED.
More informationTHERMOELECTRIC REFRIGERATION
THERMOELECTRIC REFRIGERATION THE INTERNATIONAL CRYOGENICS MONOGRAPH SERIES Volumes in preparation Very High Magnetic Fields Superconductivity for Engineers Cryogenic Laboratory Equipment Superconductivity
More informationTHE OXIDE HANDBOOK. Institute of Problems in Materials Science Academy of Sciences of the Ukrainian SSR Kiev, USSR. Translated from Russian by
THE OXIDE HANDBOOK THE OXIDE HANDBOOK Edited by G. V. Samsonov Institute of Problems in Materials Science Academy of Sciences of the Ukrainian SSR Kiev, USSR Translated from Russian by C. Nigel Turton
More informationDRUG SAFETY EVALUATION
DRUG SAFETY EVALUATION DRUG SAFETY EVALUATION SHAYNE C. GAD A John Wiley & Sons, Inc., Publication This book is printed on acid-free paper. Copyright # 2002 by John Wiley and Sons, Inc., New York. All
More information2011 ReferencePoint Press, Inc.
2011 ReferencePoint Press, Inc. For more information, contact: ReferencePoint Press, Inc. PO Box 27779 San Diego, CA 92198 www. ReferencePointPress.com ALL RIGHTS RESERVED. No part of this work covered
More informationFinancial Accounting, Reporting and Analysis
027370253X_COVER 18/10/05 10:40 AM Page 1 The fully updated International Edition of Elliott and Elliott s market-leading Financial Accounting and Reporting uses the latest International Accounting Standards
More informationCustomer Service for Hospitality and Tourism
Customer Service for Hospitality and Tourism Second Edition Simon and Louise Hudson (G) Goodfellow Publishers Ltd (G) Published by Goodfellow Publishers Limited, Woodeaton, Oxford, OX3 9TJ http://www.goodfellowpublishers.com
More informationIntegrated Pest Management
Integrated Pest Management Integrated Pest Management Edited by J. Lawrence Apple North Carolina State University at Raleigh and Ray F. Smith University of California at Berkeley PLENUM PRESS. NEW YORK
More informationYIELD POINT PHENOMENA IN METALS AND ALLOYS
YIELD POINT PHENOMENA IN METALS AND ALLOYS Yield Point Phenomena In Metals and Alloys E. O. Hall Plenum Press NEW YORK E. O. Hall 1970 Softcover reprint of the hardcover 1 st edition 1970 US Edition published
More informationSOCIAL CAPITAL IN DEVELOPMENT PLANNING
SOCIAL CAPITAL IN DEVELOPMENT PLANNING SOCIAL CAPITAL IN DEVELOPMENT PLANNING LINKING THE ACTORS Raffaella Y. Nanetti and Catalina Holguin SOCIAL CAPITAL IN DEVELOPMENT PLANNING Copyright Raffaella Y.
More informationThe Procurement and Supply Manager s Desk Reference
The Procurement and Supply Manager s Desk Reference The Procurement and Supply Manager s Desk Reference Second Edition FRED SOLLISH, MS JOHN SEMANIK, MBA John Wiley & Sons, Inc. Copyright 2012 by John
More informationBiochemistry and Molecular Biology of Antimicrobial Drug Action
Biochemistry and Molecular Biology of Antimicrobial Drug Action Biochemistry and Molecular Biology of Antimicrobial Drug Action Fifth edition Formerly Biochemistry of Antimicrobial Action T. J. Franklin
More informationStrength- Based Leadership Coaching in Organizations
Strength- Based Leadership Coaching in Organizations An evidencebased guide to positive leadership development Doug MacKie Kogan Page Publisher s note Every possible effort has been made to ensure that
More informationDEVELOPMENTS IN INTERNATIONAL LAW
STATE IMMUNITY DEVELOPMENTS IN INTERNATIONAL LAW Other titles in the series C.R. Symmons, The Maritime Zones of Islands in International Law. ISBN 90-247-2171-7 B.H. Dubner, The Law of International Sea
More informationHydraulic Extrusion Presses
Hydraulic Extrusion Presses Hydraulic Extrusion Presses Presses used for the production of tubes, solid rods, hollow sections, wire, and cable sheathing in nonferrous metals By Ernst Miiller Duisburg With
More informationFoseco Ferrous Foundryman s Handbook
Foseco Ferrous Foundryman s Handbook Foseco Ferrous Foundryman s Handbook Edited by John R. Brown OXFORD AUCKLAND BOSTON JOHANNESBURG MELBOURNE NEW DELHI Butterworth-Heinemann Linacre House, Jordan Hill,
More informationDIRECT -CONTACT HEAT TRANSFER
DIRECT -CONTACT HEAT TRANSFER DIRECT -CONTACT HEAT TRANSFER Edited by Frank Kreith Solar Energy Research Institute Golden, Colorado and University of Colorado, Boulder R. F. Boehm University of Utah Salt
More informationINTERPRETIVE TECHNIQUES FOR MICROSTRUCTURAL ANALYSIS
INTERPRETIVE TECHNIQUES FOR MICROSTRUCTURAL ANALYSIS INTERPRETIVE TECHNIQUES FOR MICROSTRUCTURAL ANALYSIS Edited by James L. McCall Battelle-Columbus Laboratories Columbus, Ohio and P. M. French Westinghouse
More informationPearson Education Limited Edinburgh Gate Harlow Essex CM20 2JE England and Associated Companies throughout the world
Pearson Education Limited Edinburgh Gate Harlow Essex CM20 2JE England and Associated Companies throughout the world Visit us on the World Wide Web at: www.pearsoned.co.uk Pearson Education Limited 2014
More informationEFFICIENCY AUDITING B.H. WALLEY
EFFICIENCY AUDITING By the same author PERFORMANCE AND PROFITABILITY (with M. j. Clay) MANUAL OF OFFICE ADMINISTRATION HOW TO MAKE AND CO NT RO L A PRO FIT PLAN HOW TO APPLY STRATEGY IN PROFIT PLANNING
More informationFUNDAMENTALS OF SEMICONDUCTOR PROCESSING TECHNOLOGY
FUNDAMENTALS OF SEMICONDUCTOR PROCESSING TECHNOLOGY FUNDAMENTALS OF SEMICONDUCTOR PROCESSING TECHNOLOGY by Badih EI-Kareh IBM Corporation Graphics and Layout: Richard J. Bombard SPRINGER SCIENCE+BUSINESS
More informationPublic Management and Administration
Public Management and Administration Also by Owen E. Hughes AUSTRALIAN POLITICS AUSTRALIAN POLITICS: Realities in Conflict (with Hugh I. Emy) INTERGOVERNMENTAL RELATIONS AND PUBLIC POLICY (editor with
More informationDRINKING WATER SUPPLY AND AGRICULTURAL POLLUTION
DRINKING WATER SUPPLY AND AGRICULTURAL POLLUTION ENVIRONMENT & POLICY VOLUME 11 The titles published in this series are listed at the end of this volume. Drinking Water Supply and Agricultural Pollution
More informationEconomics of Forest Resources
Economics of Forest Resources Gregory S. Amacher Markku Ollikainen Erkki Koskela The MIT Press Cambridge, Massachusetts London, England ( 2009 Massachusetts Institute of Technology All rights reserved.
More informationHigh Temperature Component Life Assessment
High Temperature Component Life Assessment High Temperature Component Life Assessment G.A. Webster Professor of Engineering Materials Department of Mechanical Engineering Imperial College of Science, Technology
More informationValue Management of Construction Projects
Value Management of Construction Projects Value Management of Construction Projects John Kelly Steven Male Drummond Graham # 2004 by Blackwell Science Ltd, a Blackwell Publishing Company Editorial Offices:
More informationGENERAL COST STRUCTURE ANALYSIS. Theory and Application to the Banking Industry
GENERAL COST STRUCTURE ANALYSIS Theory and Application to the Banking Industry GENERAL COST STRUCTURE ANAL YSIS Theory and Application to the Banking Industry by Ziad Sarkis University of Oxford ~. " Springer
More informationHeadquarters and Subsidiaries in Multinational Corporations
Headquarters and Subsidiaries in Multinational Corporations This page intentionally left blank Headquarters and Subsidiaries in Multinational Corporations Strategies, Tasks and Coordination Stewart Johnston
More informationWaste Treatment and Disposal
Waste Treatment and Disposal Waste Treatment and Disposal, Second Edition Paul T. Williams 2005 John Wiley & Sons, Ltd ISBNs: 0-470-84912-6 (HB); 0-470-84913-4 (PB) Waste Treatment and Disposal Second
More informationEXPLAINING AND FORECASTING THE US FEDERAL FUNDS RATE
EXPLAINING AND FORECASTING THE US FEDERAL FUNDS RATE This page intentionally left blank Explaining and Forecasting the US Federal Funds Rate A Monetary Policy Model for the US MATTHEW CLEMENTS Matthew
More informationSarbanes-Oxley. Guide for Finance and Information Technology Professionals SANJAY ANAND. John Wiley & Sons, Inc.
Sarbanes-Oxley Guide for Finance and Information Technology Professionals SANJAY ANAND John Wiley & Sons, Inc. Sarbanes-Oxley Guide for Finance and Information Technology Professionals Sarbanes-Oxley
More informationDiagnosing and Changing Organizational Culture
Diagnosing and Changing Organizational Culture To download PDFs of the OCAI (Organizational Culture Assessment Instrument) and the MSAI (Management Skills Assessment Instrument) please go to www.josseybass.com/go/cameron.
More informationX-Ray Diffraction. A Practical Approach
X-Ray Diffraction A Practical Approach X-Ray Diffraction A Practical Approach c. Suryanarayana Colorado School of Mines Golden, Colorado and M. Grant Norton Washington State University Pullman, Washington
More informationSIXTH EDITION MATERIALS FOR ENGINEERS AND TECHNICIANS W. BOLTON & R. A. HIGGINS
SIXTH EDITION MATERIALS FOR ENGINEERS AND TECHNICIANS W. BOLTON & R. A. HIGGINS Materials for Engineers and Technicians A comprehensive yet accessible introduction to materials engineering which provides
More informationInduction Heat Treating
Practical Induction Heat Treating Second Edition Richard E. Haimbaugh Materials Park, Ohio 44073-0002 www.asminternational.org Copyright 2015 by ASM International All rights reserved No part of this book
More informationFUNDAMENTALS OF HYDROLOGY
FUNDAMENTALS OF HYDROLOGY In order to manage the world s increasingly scarce water resources we must have a sound understanding of how water moves around the planet and what influences water quality. Fundamentals
More informationMethane Production from Agricultural and Domestic Wastes
Methane Production from Agricultural and Domestic Wastes ENERGY FROM WASTES SERIES Editor ANDREW PORTEOUS Reader in Engineering Mechanics The Open University Walton Hall, Milton Keynes, UK Methane Production
More informationBridge Design and Evaluation
Bridge Design and Evaluation Bridge Design and Evaluation LRFD and LRFR Gongkang Fu John Wiley & Sons, Inc. Cover Design: Michael Rutkowski Cover Photograph: Courtesy of Alamy Creativity/Alamy This book
More informationSTRUCTURE AND FUNCTION OF PLASMA PROTEINS VOLUME 1
STRUCTURE AND FUNCTION OF PLASMA PROTEINS VOLUME 1 STRUCTURE AND FUNCTION OF PLASMA PROTEINS VOLUME 1 Edited by A. C. Allison Clinical Research Centre Watford Road Harrow Middlesex PLENUM PRESS LONDON
More informationBEST PRACTICES IN PLANNING AND PERFORMANCE MANAGEMENT RADICALLY RETHINKING MANAGEMENT FOR A VOLATILE WORLD. Third Edition. David A. J.
BEST PRACTICES IN PLANNING AND PERFORMANCE MANAGEMENT RADICALLY RETHINKING MANAGEMENT FOR A VOLATILE WORLD Third Edition David A. J. Axson Best Practices in Planning and Performance Management Best Practices
More informationFundamental Structural Analysis
Fundamental Structural Analysis w. J. Spencer Fundamental Structural Analysis Springer Science+Business Media, LLC W. J. Spencer 1988 Originally published by Springer-Verlag New York Inc. in 1998 Softcover
More informationMETAL MATRIX COMPOSITES. A Study of Patents, Patent Applications and Other Literature
METAL MATRIX COMPOSITES A Study of Patents, Patent Applications and Other Literature METAL MATRIX COMPOSITES A Study of Patents, Patent Applications and Other Literature Edited by SEBASTIAAN A. GIESKES
More informationLIFE CYCLE RELIABILITY ENGINEERING
LIFE CYCLE RELIABILITY ENGINEERING Life Cycle Reliability Engineering. Guangbin Yang Copyright 2007 John Wiley &Sons, Inc. ISBN: 978-0-471-71529-0 LIFE CYCLE RELIABILITY ENGINEERING Guangbin Yang Ford
More informationESSENCE BOOKS ON BUI LDING. General Editor: J. H. Cheetham, A.R.I.B.A. WALLS
ESSENCE BOOKS ON BUI LDING General Editor: J. H. Cheetham, A.R.I.B.A. WALLS SOME OTIIER ELBS LOW-PRICED EDITIONS Anderson MATERIALS SCIENCE Longman and Leaver Bannister and SURVEYING Pitman Raymond Blyth
More informationSurface Hardening of Steels Understanding the Basics
Surface Hardening of Steels Understanding the Basics Edited by J.R. Davis Davis & Associates ASM International Materials Park, OH 44073-0002 Copyright 2002 by ASM International All rights reserved No part
More informationBarnes & Noble Inc. Electronic Data Interchange (EDI) A Brief Introduction to EDI
Reference: EL303 December 2, 1996 Barnes & Noble Inc. Electronic Data Interchange (EDI) A Brief Introduction to EDI Barnes & Noble INTRODUCTION TO EDI Reference: EL303 December 2, 1996 Page 1 Summary This
More informationAWS A5.28/A5.28M:2005 An American National Standard. Specification for Low-Alloy Steel Electrodes and Rods for Gas Shielded Arc Welding
An American National Standard Specification for Low-Alloy Steel Electrodes and Rods for Gas Shielded Arc Welding Key Words Filler metal specifications, low-alloy steel welding electrodes, gas metal arc
More informationManagement Accounting
Management Accounting MANAGEMENT ACCOUNTING A Review of Contemporary Developments Second Edition Robert W. Sea pens ~ MACMILLAN Robert W. Scapens 1985, 1991 All rights reserved. No reproduction, copy or
More informationTHE BUSINESS OF SHIPPING
THE BUSINESS OF SHIPPING THE BUSINESS OF SHIPPING Fifth Edition by LANE C. KENDALL London CHAPMAN AND HALL Fifth edition published in the UK 1986 by Chapman and Hall Ltd. 11 NewFetterLane,LondonEC4P4EE
More informationSurface Treatments for Improved Performance and Properties
Surface Treatments for Improved Performance and Properties SAGAMORE ARMY MATERIALS RESEARCH CONFERENCE PROCEEDINGS Recent volumes in the series: 10th: Characterization of Materials in Research: Ceramics
More informationShipyard Cost Estimating (Using PERCEPTION Version 7)
Shipyard Cost Estimating (Using PERCEPTION Version 7) Phone: (410) 263-8593 Fax: (410) 266-0503 Email: Info@SPARUSA.com Web Site: www.sparusa.com EM-GD-009 Rev. 06/12/2003 PERCEPTION is a registered trademark
More informationSuccessful Project Management. Second Edition
Successful Project Management Second Edition Successful Project Management Second Edition Larry Richman Material in this course has been adapted from Project Management Step-by-Step, by Larry Richman.
More informationManaging Electronic Records
Managing Electronic Records 4th Edition William Saffady ARMA International Lenexa, Kansas Consulting Editor: Mary L. Ginn, Ph.D. Composition: Gray Design Cover Art: Brett Dietrich ARMA International 13725
More informationREFRACTORY METAL ALLOYS Metallurgy and Technology
REFRACTORY METAL ALLOYS Metallurgy and Technology Editors I. Machlin Materials and Processes Branch Naval Air Systems Command Departrn.ent of the Navy Washington, D.C. R. T. Begley Astronuclear Laboratory
More informationPower in Tudor England
Power in Tudor England BRITISH STUDIES SERIES General Editor: Jeremy Black John Charmley A History of British Politics, 1900-1996 David Childs Britain Since 1939 Brian Hill The Early Parties and Politics
More informationAlso by Pierre Mevellec
Cost Systems Design Also by Pierre Mevellec Les Systèmes de coûts, objectifs, paramètres de conception et analyse comparée, Dunod et l Orde des Experts Comptables, Paris 2005 Le calcul de coût dans les
More informationHEAT PUMP FUNDAMENTALS
HEAT PUMP FUNDAMENTALS NATO ADVANCED STUDY INSTITUTES SERIES Proceedings of the Advanced Study Institute Programme, which aims at the dissemination of advanced knowledge and the formation of contacts among
More informationDependent Self-Employment
Dependent Self-Employment This page intentionally left blank Dependent Self-Employment Workers on the Border Between Employment and Self-Employment Ulrike Muehlberger Vienna University of Economics and
More informationLecture Notes in Management and Industrial Engineering
Lecture Notes in Management and Industrial Engineering Volume 1 Series Editor: Adolfo López-Paredes Valladolid, Spain This bookseries provides a means for the dissemination of current theoretical and applied
More informationForensic Accounting and Fraud Investigation for Non-Experts
Forensic Accounting and Fraud Investigation for Non-Experts Forensic Accounting and Fraud Investigation for Non-Experts Third Edition HOWARD SILVERSTONE MICHAEL SHEETZ STEPHEN PEDNEAULT FRANK RUDEWICZ
More informationExplosions. w. Bartknecht. Course Prevention Protection. With 259 Figures, Some in Color and 34 Tables
w. Bartknecht Explosions Course Prevention Protection With 259 Figures, Some in Color and 34 Tables Translation from the German by H. Burg and T. Almond Springer-Verlag Berlin Heidelberg New York 1981
More informationAn Introduction to Forensic Genetics
An Introduction to Forensic Genetics Second Edition William Goodwin University of Central Lancashire, Preston, Lancashire, England, UK Adrian Linacre Flinders University, Adelaide, South Australia, Australia
More informationDimensions of International Business
Soviet Foreign Trade Dimensions of International Business Previously published books in the series: William A. Evans, Management Ethics Frank Long, Restrictive Business Practices, Transnational Corporations,
More informationTHE INDEX-NUMBER PROBLEM AND ITS SOLUTION
THE INDEX-NUMBER PROBLEM AND ITS SOLUTION By the same author THE EXCHANGE STABILITY PROBLEM SYSTEMS OF SOCIAL ACCOUNTS *NATIONAL ACCOUNTS ANALYSIS *Also published by Macmillan THE INDEX-NUMBER PROBLEM
More information