City of Ottawa Street Lighting. Streetlight Brackets and Adapters
|
|
- Collin Glenn
- 6 years ago
- Views:
Transcription
1 TITLE: Engineering Specification RECOMMENDED: S. Edey, NO: 1 REV: APPROVED: D. O Keefe LBS0001 OF REV. DATE: City of Ottawa Street Lighting Streetlight Brackets and Adapters For City of Ottawa Use Only
2 REVISION SHEET REVISION DESCRIPTION DATE INITIAL 1 Add 4.7m bracket csm/jb Renamed LPS0011 to LBS0011, LBS0001, and LBS0002 Text and Drawings 2 Supersedes LBS0004 General Conditions referenced in separate specification Revised scope 3 Associated Standard Drawings identified (10.0) csm jb jb 4 51mm IPS tenon (4.0) jb 5 Approval and Recommended authorization changed se do For City of Ottawa Use Only LBS0001 Rev.5 Page 2 of 6
3 TABLE OF CONTENTS 1.0 GENERAL SCOPE REFERENCE STANDARDS APPROVAL OF SOURCE MECHANICAL REQUIREMENTS INFORMATION SUPPLIED TO THE BIDDERS INSTRUCTIONS TO BIDDERS GENERAL INFORMATION TO BE PROVIDED IN QUOTATIONS SAMPLES INSPECTION SHIPMENT WARRANTY DRAWINGS... 6 For City of Ottawa Use Only LBS0001 Rev.5 Page 3 of 6
4 1.0 General 1.1 Scope This specification covers the safety strength requirements, mounting/grounding arrangements and size classification for tapered elliptical aluminium brackets for supporting "cobra head" luminaries in addition to specialty brackets. This specification section shall be read in conjunction with engineering specification LGC Reference Standards Brackets shall comply with all applicable requirements in the latest issues of the following standards: ANSI Standard C ASTM Standard B221 ASTM Standard B241 CSA Standard S157 CSA Standard W59.2 Metal Brackets for Wood Poles Used in Roadway Lighting Aluminium Alloy Extruded Bars, Rods, Wire, Shapes and Tubes Aluminium Tubing - Aluminium Alloy Seamless Pipe and Seamless Extruded Tube Strength Design in Aluminium Welded Aluminium Construction The supplier shall be certified in accordance with the CSA Standard W47.2, certification of companies for fusion welding of Aluminium. The detail drawings attached to this specification complement and form part of the requirements of this specification. 3.0 Approval of Source Only manufacturers approved by the City of Ottawa or its agent shall supply brackets. Only brackets evaluated and approved before submission of a quotation will be accepted. Each bracket supplied shall be of the same construction currently approved by the City of Ottawa or its agent and once approved, the supplier shall not supply brackets with substantive changes in design without prior approval. 4.0 Mechanical Requirements The bracket arm shall be fabricated from aluminium alloy No T4 tubing (heat treated after fabrication to -T6) or equivalent. The bracket shall not be torn apart or otherwise fail in such a manner as to shed an applied load of 115 kg vertical and 25 kg horizontal applied separately for ten minutes within 150mm of the luminaire end of the bracket. The bracket while supporting a luminaire under Class C loading, shall withstand without permanent deformation, a wind load of 3.6 kg (approx. 88km/h and an ice load of 1.27 cm or alternatively, a wind load of 18.0 kg (approx. 130 km/h) without ice. The bracket shall be fabricated with a 51mm IPS tenon to permit safe mounting and support of a luminaire 0.21 m 2 projected area maximum and 25 kg maximum. All sharp edges and holes shall be chamfered to remove burrs. For City of Ottawa Use Only LBS0001 Rev.5 Page 4 of 6
5 Bracket arm shall be rotary polished overall with No. 80 grit or otherwise finished to a smooth and uniform appearance. Any finish other than rotary polished shall be stated at the time of quotation. Each bracket shall have identification stamped on the pole plate showing the manufacture's name or trademark and the date of manufacture. 5.0 Information Supplied To The Bidders The following information will be supplied to the bidder: a) Quantity b) Length c) Pole Mounting d) Mounting Hardware (if required) e) Grounding Provisions (if required) f) Protection for Shipment (if required) 6.0 Instructions To Bidders 6.1 General Suppliers shall submit with their quotations the information requested herein. Suppliers who fail to provide the information requested might have their quotations rejected as incomplete. 6.2 Information to be provided in Quotations Each bidder shall submit with his quotation two copies of the Outline Drawing. 6.3 Samples If requested, the supplier shall provide a sample identical in every way to the units being tendered. Samples will be returned to the supplier after evaluation. 7.0 Inspection The purchaser reserves the right to act as its own inspection agency or appoint an inspection agency to observe all steps of manufacturing testing and verification of the requirements of this specification. 8.0 Shipment When requested, each bracket shall be individually wrapped with paper or jute to provide reasonable shipping protection against permanent marking of the polished surfaces. The supplier shall obtain approval from the purchaser prior to delivery. For City of Ottawa Use Only LBS0001 Rev.5 Page 5 of 6
6 9.0 Warranty The manufacturer shall warrant that the brackets furnished by them conform to all the requirements and conditions of this specification. The manufacturer shall repair or replace, at no expense to the purchaser, defects due to fault workmanship, material or design for a period of five years after installation of the brackets, but in no case for more than six years after receipt of the unit by the purchaser. All shipping charges shall be the responsibility of the supplier Drawings LBD0001, LBD0002, LBD0003, LBD0004, LBD0005, LBD0006, LBD0007, LBD0008. For City of Ottawa Use Only LBS0001 Rev.5 Page 6 of 6
MAST ARMS: ALUMINUM, TRUSS TYPE AND DAVIT TYPE
ELECTRICAL SPECIFICATION 1453 DIVISION OF ENGINEERING DEPARTMENT OF TRANSPORTATION CITY OF CHICAGO REVISED MARCH 14, 2013 MAST ARMS: ALUMINUM, TRUSS TYPE AND DAVIT TYPE SUBJECT 1. This specification covers
More informationCity of Ottawa Street Lighting. HID Coach Style Luminaire
TITLE: Engineering Specification RECOMMENDED: S. Edey NO: 1 REV: APPROVED: D. O Keefe LLS0001 OF REV. DATE: 2010-01-07 9 5 City of Ottawa Street Lighting HID Coach Style Luminaire For City of Ottawa Use
More informationCity of Ottawa Street Lighting. Photoelectric Controllers
TITLE: Engineering Specification RECOMMENDED: S. Edey NO: 1 REV: APPROVED: D. O Keefe LAS0001 OF REV. DATE: 2010-01-07 7 2 City of Ottawa Street Lighting Photoelectric Controllers For City of Ottawa Use
More information05510: TAPERED STEEL TROLLEY POLES AND ACCESSORIES
PART 1 GENERAL 1.01 DESCRIPTION A. The Vendor shall fabricate, furnish, test and deliver tapered steel trolley poles, including base plates, reinforced hand holes, anchor bolts, nuts and washers, and accessories
More informationCity of Ottawa Street Lighting. Pole Nomenclature Tagging
TITLE: Engineering Specification RECOMMENDED: S. Edey NO: 1 REV: APPROVED: D. O Keefe LPS0003 OF REV. DATE: 2010-01-07 6 3 City of Ottawa Street Lighting Pole Nomenclature Tagging For City of Ottawa Use
More informationMATERIAL SPECIFICATION FOR HIGH PRESSURE SODIUM LUMINAIRES FOR HIGHWAY LIGHTING
ONTARIO PROVINCIAL STANDARD SPECIFICATION METRIC OPSS 2432 NOVEMBER 2015 MATERIAL SPECIFICATION FOR HIGH PRESSURE SODIUM LUMINAIRES FOR HIGHWAY LIGHTING TABLE OF CONTENTS 2432.01 SCOPE 2432.02 REFERENCES
More informationPOLE: ANCHOR BASE, ALUMINUM, TAPERED TUBULAR SHAFT
ELECTRICAL SPECIFICATION 1452 DIVISION OF ENGINEERING DEPARTMENT OF TRANSPORTATION CITY OF CHICAGO REVISED MARCH 19, 2014 POLE: ANCHOR BASE, ALUMINUM, TAPERED TUBULAR SHAFT SUBJECT 1. This specification
More informationDETAIL SPECIFICATION PIPE, ALUMINUM ALLOY, DRAWN OR EXTRUDED
INCH-POUND MIL-DTL-299E September 2014 SUPERSEDING MIL-DTL-299D 14 May 2007 DETAIL SPECIFICATION PIPE, ALUMINUM ALLOY, DRAWN OR EXTRUDED 1. SCOPE This specification is approved for use by all Departments
More information066 : 1998 CEB STANDARD GALVANIZED IRON PIPES FOR SERVICE CONNECTIONS CEYLON ELECTRICITY BOARD SRI LANKA
066 : 1998 CEB STANDARD GALVANIZED IRON PIPES FOR SERVICE CONNECTIONS CEYLON ELECTRICITY BOARD SRI LANKA Specification for GALVANIZED IRON PIPES FOR SERVICE CONNECTIONS CEB Standard 066 : 1998 CEYLON ELECTRICITY
More informationMATERIAL SPECIFICATION FOR LUMINAIRE RAISING AND LOWERING EQUIPMENT
ONTARIO PROVINCIAL STANDARD SPECIFICATION METRIC OPSS 2476 JANUARY 1990 MATERIAL SPECIFICATION FOR LUMINAIRE RAISING AND LOWERING EQUIPMENT 2476.01 SCOPE 2476.02 REFERENCES 2476.05 MATERIALS TABLE OF CONTENTS
More informationAluminum Component Pipe Railings
1 SECTION 05 7360 ALUMINUM COMPONENT PIPE RAILINGS PART 1 GENERAL 1.01 SECTION INCLUDES A. Aluminum component pipe handrails and railings. 1.02 RELATED REQUIREMENTS A. Section 02 9000: Landscaping: Installation
More informationSTANDARD SPECIFICATION FOR ALUMINUM FRAMING FOR RAILROAD PASSENGER SHELTERS
SOUTHEASTERN PENNSYLVANIA TRANSPORTATION AUTHORITY 1234 MARKET STREET, PHILADELPHIA, PA 19107 STANDARD SPECIFICATION FOR ALUMINUM FRAMING FOR RAILROAD PASSENGER SHELTERS REVISION DATE SPECIFICATION # F-S-304_
More informationSECTION CRL70 HEAVY GLASS TOP HUNG SLIDING DOOR SYSTEMS
Page 1 of 6 SECTION 08 32 20 CRL70 HEAVY GLASS TOP HUNG SLIDING DOOR SYSTEMS USE THIS SECTION WHEN SPECIFYING OVERHEAD SUPPORTED GLASS [OR WOOD] PANEL PARTITIONS. SECTION INCLUDES OVERHEAD TRACK ASSEMBLY,
More informationSPECIFICATION SECTION 05515: LADDERS O Keeffe s Aluminum Ladders
Welcome to the O Keeffe s Guide Specification System prepared as an aid to specify in preparing written construction documents. For specification assistance with specific product applications, please contact
More informationSECTION LATCHWAYS CONSTANT FORCE POSTS
PART 1 GENERAL 1.1 SYSTEM DESCRIPTION SECTION 112429 LATCHWAYS CONSTANT FORCE POSTS A. Type of system required: Constant Force Posts (CFP(s)) Use with Latchways Lifeline or single point anchors B. System
More informationSECTION 1043 FENCE MATERIAL
SECTION 1043 FENCE MATERIAL 1043.1 Scope. This specification covers the material required in the construction of chainlink fence and woven wire fence. 1043.2 Basis of Acceptance. The basis of acceptance
More informationSECTION EZ-SLIDE 80 AND 180 HEAVY GLASS TOP HUNG SLIDING DOOR SYSTEMS
Page 1 of 6 SECTION 08 32 20 EZ-SLIDE 80 AND 180 HEAVY GLASS TOP HUNG SLIDING DOOR SYSTEMS USE THIS SECTION WHEN SPECIFYING OVERHEAD SUPPORTED GLASS PANEL PARTITIONS. SECTION INCLUDES OVERHEAD TRACK ASSEMBLY,
More informationASTM B363-06a Standard Specification for Seamless and Welded Unalloyed
Standard Specification for Seamless and Welded Unalloyed Titanium and Titanium Alloy Welding Fittings 1. Scope :- 1.1 This specification cover fittings intended for general corrosion resisting and elevated
More informationCITY OF CHARLOTTETOWN REQUEST FOR QUOTATIONS TRAFFIC SIGNALS - POLES AND ARMS
CITY OF CHARLOTTETOWN REQUEST FOR QUOTATIONS TRAFFIC SIGNALS - POLES AND ARMS September 2018 Quotes shall be submitted by completing this document and placing it in a sealed, opaque envelope, clearly marked
More informationITEM 686 TRAFFIC SIGNAL POLE ASSEMBLIES (STEEL)
ITEM 686 TRAFFIC SIGNAL POLE ASSEMBLIES (STEEL) 686.1. Description. This Item shall govern for designing, fabricating, furnishing and erecting steel traffic signal pole assemblies of the various types
More information1675 Locust Street Red Bud, IL Phone: Fax: WARRANTY & TERMS
Model # 349S-P6 1675 Locust Street Red Bud, IL 62278 Phone: 618-282-8200 Fax: 618-282-8202 WARRANTY & TERMS WARRANTY: 5 Year Limited Warranty on Thermoplastic coated elements. Ultra Play guarantees all
More informationMATERIAL SPECIFICATION FOR STEEL POLES, BASE MOUNTED
ONTARIO PROVINCIAL STANDARD SPECIFICATION METRIC OPSS.MUNI 2423 APRIL 2017 MATERIAL SPECIFICATION FOR STEEL POLES, BASE MOUNTED TABLE OF CONTENTS 2423.01 SCOPE 2423.02 REFERENCES 2423.03 DEFINITIONS -
More informationSECTION FLAGPOLES
PART 1 - GENERAL 1.1 DESCRIPTION SECTION 10 75 00 SPEC WRITER NOTE: 1. Use this section only for NCA projects. 2. Delete between //----// if not applicable to project. Also delete any other item or paragraph
More informationSECTION ORNAMENTAL ALUMINUM RAILING
SECTION 05730 ORNAMENTAL ALUMINUM RAILING PART 1 GENERAL 1.1 SECTION INCLUDES A. Aluminum Pipe Railing 1.2 RELATED SECTIONS A. Section 03300 Cast-In-Place Concrete: Placement of sleeves cast in concrete.
More informationTOWN OF GRAND FALLS-WINDSOR
TOWN OF GRAND FALLS-WINDSOR TENDER FOR SUPPLY OF LED LIGHT FIXTURES AND SUPPORT ARMS SKI TRAIL TENDER #2017-G9 General Conditions 1. All taxes must be included. 2. Tenders which are incomplete, conditional,
More informationDMS HIGH MAST LIGHT FIXTURES
DMS - 11020 EFFECTIVE DATE: JANUARY 2012 11020.1. Description. This specification governs the materials, composition, and quality of 400 watt (W) high pressure sodium (HPS) tenon-mounted high mast light
More informationA. Atlantic Railing Series with Mushroom Top and Square Pickets
100 Series-A1-A10 PART 1 General 1.1 SECTION INCLUDES A. Atlantic Railing Series with Mushroom Top and Square Pickets 1.2 RELATED SECTIONS A. Section 05510-Metal Stairs: Metal Handrails other than those
More informationSECTION 716 SIGN MATERIALS SCOPE
716 716.01.01 MATERIALS COVERED SECTION 716 SIGN MATERIALS SCOPE A. This specification covers the kind and quality of materials used in the construction and fabrication of traffic control devices used
More informationSECTION CRL50 AND CRL51 HEAVY GLASS TOP HUNG SLIDING DOOR SYSTEMS
SECTION 08 32 20 CRL50 AND CRL51 HEAVY GLASS TOP HUNG SLIDING DOOR SYSTEMS Page 1 of 6 USE THIS SECTION WHEN SPECIFYING OVERHEAD SUPPORTED GLASS PANEL PARTITIONS. SECTION INCLUDES OVERHEAD TRACK ASSEMBLY,
More informationSECTION SUSPENDED MAINTENANCE ANCHORAGE SYSTEM
SECTION 112423 SUSPENDED MAINTENANCE ANCHORAGE SYSTEM PART 1 GENERAL 1.1 SECTION INCLUDES A. Suspended Access Anchorage Systems: 1. System design and certification. 2. Fall protection roof anchors. 3.
More informationSECTION PREFABRICATED PIPE BRIDGE(s)
SECTION 13135 - PREFABRICATED PIPE BRIDGE(s) PART 1 - GENERAL 1.01 Scope A. The Contractor is responsible for all engineering design, detailing, fabricating, installation including foundations for the
More informationMATERIAL SPECIFICATION FOR PRECAST REINFORCED CONCRETE BOX CULVERTS AND BOX SEWERS
ONTARIO PROVINCIAL STANDARD SPECIFICATION METRIC OPSS 1821 APRIL 2004 MATERIAL SPECIFICATION FOR PRECAST REINFORCED CONCRETE BOX CULVERTS AND BOX SEWERS TABLE OF CONTENTS 1821.01 SCOPE 1821.02 REFERENCES
More informationSECTION MISCELLANEOUS METALS
PART 1 GENERAL 1.1 WORK OF THIS SECTION A. Contractor shall provide all labor, materials, equipment and incidentals as shown, specified and required to furnish and install all miscellaneous metal fabrications
More informationCONSTRUCTION SPECIFICATION FOR INSTALLATION OF ROADWAY LUMINAIRES
ONTARIO PROVINCIAL STANDARD SPECIFICATION METRIC OPSS 617 NOVEMBER 2013 CONSTRUCTION SPECIFICATION FOR INSTALLATION OF ROADWAY LUMINAIRES TABLE OF CONTENTS 617.01 SCOPE 617.02 REFERENCES 617.03 DEFINITIONS
More informationSECTION ORNAMENTAL ALUMINUM RAILINGS PART 1 - GENERAL 1.01 SUMMARY
3-PART SPEC ORNAMENTAL ALUMINUM RAILINGS PART 1 - GENERAL 1.01 SUMMARY SECTION 05720 A. Section Includes: a. Solutions aluminum extruded shape top rail, square or round balustrade & rectangular bottom
More informationSECTION TIMBER FLOATS
SECTION 06210 PART 1 - GENERAL 1.01 SUMMARY A. This section covers furnishing and installing the timber float framing for the pile guide area, and all other components not specifically mentioned, necessary
More informationCONSTRUCTION SPECIFICATION FOR CHAIN-LINK FENCE
ONTARIO PROVINCIAL STANDARD SPECIFICATION OPSS.PROV 772 NOVEMBER 2017 (Formerly OPSS 772, November 2012) Note: The PROV published in November 2017 replaces OPSS 772 COMMON, November 2012 with no technical
More informationSECTION METAL DOORS & FRAMES
SECTION 08100 METAL DOORS & FRAMES PART 1 GENERAL 1.1 SCOPE Drawings and general provisions of the Contract, including General and Supplementary General Conditions and other Division 00 & 01 specification
More informationCONSTRUCTION SPECIFICATION FOR INSTALLATION OF ROADWAY LUMINAIRES
ONTARIO PROVINCIAL STANDARD SPECIFICATION METRIC OPSS 617 NOVEMBER 2008 CONSTRUCTION SPECIFICATION FOR INSTALLATION OF ROADWAY LUMINAIRES TABLE OF CONTENTS 617.01 SCOPE 617.02 REFERENCES 617.03 DEFINITIONS
More informationMATERIAL SPECIFICATION FOR SIGNAL HEADS
ONTARIO PROVINCIAL STANDARD SPECIFICATION METRIC OPSS 2461 DECEMBER 1988 MATERIAL SPECIFICATION FOR SIGNAL HEADS 2461.01 SCOPE 2461.02 REFERENCES 2461.03 DEFINITIONS INDEX 2461.04 SUBMISSION AND DESIGN
More informationDivision MEDICAL EQUIPMENT SUPPORT SYSTEMS PART 1 GENERAL
Division 11-7010 MEDICAL EQUIPMENT SUPPORT SYSTEMS PART 1 GENERAL 1.1 SUMMARY A. Contractor shall provide medical equipment support systems as indicated on the drawings. Support systems shall be as required
More informationModel # 940S-P6-BB. 6/7/2017 Page 1 of 10
Model # 940S-P6-BB 6/7/2017 Page 1 of 10 /7/2017 Page 2 of 10 1675 Locust Street Red Bud, IL 62278 Phone: 618-282-8200 Fax: 618-282-8202 WARRANTY & TERMS WARRANTY: 5 Year Limited Warranty on Thermoplastic
More informationSECTION DECORATIVE METAL AND GLASS RAILING
SECTION 05 73 00 DECORATIVE METAL AND GLASS RAILING PART 1 GENERAL 1.1 SUMMARY A) This section includes both standard and custom handrails as shown in the contract drawings. B) These include aluminum,
More informationSECTION STRUCTURAL METAL FRAMING
SECTION 05100 STRUCTURAL METAL FRAMING PART 1 GENERAL 1.01 SUMMARY A. Section Includes: Structural steel framing including lintels, shelf angles, bearing plates, anchor bolts and other items as shown on
More informationDBI-SALA Uni 8 Horizontal Lifeline Cable System
SECTION 112429.17 - HORIZONTAL FALL PROTECTION - CABLE PART 1 - GENERAL 1.1 SECTION INCLUDES A. Provide horizontal cable fall protection system, including end anchors, energy absorbers, intermediate cable
More informationModel # 338S-PR. 5/1/2014 Page 1 of 12
Model # 338S-PR 5/1/2014 Page 1 of 12 /1/2014 Page 2 of 12 1675 Locust Street Red Bud, IL 62278 Phone: 618-282-8200 Fax: 618-282-8202 WARRANTY & TERMS WARRANTY: 5 Year Limited Warranty on Thermoplastic
More informationSuperior Aluminum Guide Specification 10/4/2016 Non-Welded Aluminum Pipe Railing
The following specification has been developed by: Superior Aluminum Products 555 East Main Street Russia, Ohio 45363-0430 to assist Architects and Designers in the specification of Non Welded Concealed
More informationDETAIL SPECIFICATION PIPE, ALUMINUM ALLOY, DRAWN OR EXTRUDED
INCH-POUND 14 May 2007 SUPERSEDING MIL-DTL-299C 22 November 2002 DETAIL SPECIFICATION PIPE, ALUMINUM ALLOY, DRAWN OR EXTRUDED 1. SCOPE This specification is approved for use by all Departments and Agencies
More informationModel # 338S-P. 7/31/2012 Page 1 of 13
Model # 338S-P 7/31/2012 Page 1 of 13 7/31/2012 Page 2 of 13 1675 Locust Street Red Bud, IL 62278 Phone: 618-282-8200 Fax: 618-282-8202 WARRANTY & TERMS WARRANTY: 5 Year Limited Warranty on Thermoplastic
More informationDRAFT UGANDA STANDARD
DRAFT UGANDA STANDARD DUS1910-2 First Edition 2017-10-20 Metal Chairs for 0ffice Purposes Part. 2: Revolving and Tilting- Specification Reference number DUS 1910-2:2017 UNBS 2017 DUS 1910-2:2017 Compliance
More informationMATERIAL SPECIFICATION FOR STEEL TRUSS BRACKETS
ONTARIO PROVINCIAL STANDARD SPECIFICATION OPSS.MUNI 2426 NOVEMBER 2017 MATERIAL SPECIFICATION FOR STEEL TRUSS BRACKETS TABLE OF CONTENTS 2426.01 SCOPE 2426.02 REFERENCES 2426.03 DEFINITIONS - Not Used
More informationModel # 95-S8. Page 1 of 8
Model # 95-S8 Page 1 of 8 Page 2 of 8 WARRANTY & TERMS WARRANTY: 5 Year Limited Warranty on Thermoplastic coated elements. Ultra Play guarantees all items for one full year to be free of defects in workmanship
More informationMATERIAL SPECIFICATION FOR PRECAST REINFORCED CONCRETE BOX CULVERTS
ONTARIO PROVINCIAL STANDARD SPECIFICATION METRIC OPSS 1821 NOVEMBER 2015 MATERIAL SPECIFICATION FOR PRECAST REINFORCED CONCRETE BOX CULVERTS TABLE OF CONTENTS 1821.01 SCOPE 1821.02 REFERENCES 1821.03 DEFINITIONS
More information30-SDMS-01 SPECIFICATIONS FOR LOAD BREAK SWITCH
SPECIFICATIONS FOR LOAD BREAK SWITCH This specification is property of SEC and subject to change or modification without any notice TABLE OF CONTENTS 1.0 SCOPE 3 2.0 CROSS REFERENCES 3 3.0 APPLICABLE CODES
More informationSECTION Athletic Field Equipment (Formerly 11480) DETAILED SECTION SOCCER AND FIELD HOCKEY EQUIPMENT
2B2001 Pro Premier European Match Goal SECTION 11 68 33 Athletic Field Equipment (Formerly 11480) DETAILED SECTION 11 68 33.23 SOCCER AND FIELD HOCKEY EQUIPMENT PART 1 GENERAL 1.1 WORK INCLUDED A. Provide
More informationAMBICO Limited Section BLAST RESISTANT STEEL DOOR & FRAME ASSEMBLY Page 1
Page 1 This section includes AMBICO blast resistant steel door & frame assemblies: fire rated and non-fire rated. This section relies on both Canadian Steel Door Manufacturers Association (CSDMA) as well
More informationSECTION HANDRAILS AND RAILINGS. A. Section Cast-In-Place Concrete; coordination with substrate.
SECTION 05520 HANDRAILS AND RAILINGS PART 1 GENERAL 1.1 SECTION INCLUDES A. Welded stainless steel railing systems. 1.2 RELATED SECTIONS A. Section 03300 - Cast-In-Place Concrete; coordination with substrate.
More informationMETAL FABRICATION..1 General Conditions and Division 1 shall govern Work of this section.
CITY OF BRAMPTON LANDSCAPE SPECIFICATIONS SECTION 05500-1 PART 1 GENERAL 1.1 Description of Work.1 General Conditions and Division 1 shall govern Work of this section. 1.2 Quality Assurance.1 Personnel:.1
More informationSECTION ORNAMENTAL ALUMINUM RAILING
SECTION 05730 ORNAMENTAL ALUMINUM RAILING PART 1 GENERAL 1.1 SECTION INCLUDES A. Decorative Wire Rope Railing 1.2 RELATED SECTIONS A. Section 03300 Cast-In-Place Concrete: Placement of sleeves cast in
More informationTechnical Specification for Aluminium Castings, Pole Caps and Pressed Symbols
Ergon Energy Corporation Limited Technical Specification for Aluminium Castings, Pole Caps and Pressed Symbols ETS-01-05-01 Check this is the latest Process Zone version before use. Specification ETS 01-05-01
More informationSpecification for Pipe Fittings
Specification for Pipe Fittings Specification for Pipe Fittings Page 1 of 11 Table of Contents 1.0 SCOPE...3 2.0 DEFINITIONS...3 3.0 REFERENCES, CODES AND STANDARDS...3 4.0 CONTRACTOR'S RESPONSIBILITIES...4
More informationDBI-SALA Uni 8 Overhead Horizontal Lifeline Cable System SECTION HORIZONTAL FALL PROTECTION - OVERHEAD CABLE
SECTION 112429.18 - HORIZONTAL FALL PROTECTION - OVERHEAD CABLE PART 1 - GENERAL 1.1 SECTION INCLUDES A. Provide overhead horizontal cable fall protection system, including end anchors, energy absorbers,
More informationA. ANSI A10.32, "Personal Fall Protection Used in Construction and Demolition Operations."
SECTION 112429.13 - PART 1 - GENERAL 1.1 SECTION INCLUDES A. Provide horizontal fall protection system, including attachment carriage, attachment plates, joints, corners, system stops, rail, carriage stops
More informationModel # 504S-P. 9/14/2011 Page 1 of 9
Model # 504S-P 9/14/2011 Page 1 of 9 9/14/2011 Page 2 of 9 1675 Locust Street Red Bud, IL 62278 Phone: 618-282-8200 Fax: 618-282-8202 WARRANTY & TERMS WARRANTY: 5 Year Limited Warranty on Thermoplastic
More informationModel # 158-P4. 12/12/2013 Page 1 of 11
Model # 158-P4 12/12/2013 Page 1 of 11 2/12/2013 Page 2 of 11 1675 Locust Street Red Bud, IL 62278 Phone: 618-282-8200 Fax: 618-282-8202 WARRANTY & TERMS WARRANTY: 5 Year Limited Warranty on Thermoplastic
More informationSECTION ORCHESTRA PIT FILLER
PART 1 - GENERAL 1.1 SECTION INCLUDES A. Orchestra pit filler. 1.2 REFERENCES SECTION 11 61 00 ORCHESTRA PIT FILLER A. American Hardboard Association (AHA): 1. AHA A135.4-95: Basic Hardboard. B. American
More informationFoundation Specifications
Installation Instructions Bulletin 237731 Revision E Foundation Specifications for 3.5-Meter Earth Station Antennas 1.0 INTRODUCTION 1.1 This document specifies typical foundation characteristics, designs,
More informationTrex Commercial Products page Metal Railing
SECTION 05520 HANDRAILS AND RAILINGS PART 1 GENERAL 1.1 SECTION INCLUDES A. Classic Railings (Picket). B. GridGuard Railings (Mesh). C. Post Rail (Glass). D. Tensiline Railings (Cable). E. Track Rail (Glass).
More informationModel # 238HS-P8. 4/27/2011 Page 1 of 11
Model # 238HS-P8 4/27/2011 Page 1 of 11 4/27/2011 Page 2 of 11 1675 Locust Street Red Bud, IL 62278 Phone: 618-282-8200 Fax: 618-282-8202 WARRANTY & TERMS WARRANTY: 5 Year Limited Warranty on Thermoplastic
More informationModel # 338SM-OP. 9/30/2011 Page 1 of 12
Model # 338SM-OP 9/30/2011 Page 1 of 12 9/30/2011 Page 2 of 12 1675 Locust Street Red Bud, IL 62278 Phone: 618-282-8200 Fax: 618-282-8202 WARRANTY & TERMS WARRANTY: 5 Year Limited Warranty on Thermoplastic
More informationMATERIAL SPECIFICATION FOR SECTIONAL STEEL HIGH MAST LIGHTING POLES
ONTARIO PROVINCIAL STANDARD SPECIFICATION METRIC OPSS.PROV 2471 November 2016 MATERIAL SPECIFICATION FOR SECTIONAL STEEL HIGH MAST LIGHTING POLES TABLE OF CONTENTS 2471.01 SCOPE 2471.02 REFERENCES 2471.03
More informationModel # 338S-OP. 9/30/2011 Page 1 of 13
Model # 338S-OP 9/30/2011 Page 1 of 13 9/30/2011 Page 2 of 13 1675 Locust Street Red Bud, IL 62278 Phone: 618-282-8200 Fax: 618-282-8202 WARRANTY & TERMS WARRANTY: 5 Year Limited Warranty on Thermoplastic
More informationELECTRICAL INSPECTION BULLETIN B Installation and Inspection Requirements for Street and Roadway Lighting Systems. (Effective 2015/11/15 )
Scope This document covers the installation and inspection requirements for Street and that are installed and maintained within the jurisdiction of the Nova Scotia Power Incorporated (NSPI) inspection
More information1. Base plates, setting plates and anchor rods for columns. 8. Lintels if connected to structural steel columns.
PAGE 051200-1 SECTION 051200 PART 1 - GENERAL 1.1 RELATED DOCUMENTS A. Drawings and general provisions of the Contract, including General and Supplementary Conditions and Division 01 Specification sections,
More informationSECTION HANDRAILS AND RAILINGS. Display hidden notes to specifier. (Don't know how? Click Here)
SECTION 05520 HANDRAILS AND RAILINGS PART 1 GENERAL 1.1 SECTION INCLUDES Display hidden notes to specifier. (Don't know how? Click Here) A. Classic Railings (Picket). B. GridGuard Railings (Mesh). C. Post
More informationModel # BT238-U6. 9/30/2014 Page 1 of 12
Model # BT238-U6 9/30/2014 Page 1 of 12 /30/2014 Page 2 of 12 1675 Locust Street Red Bud, IL 62278 Phone: 618-282-8200 Fax: 618-282-8202 WARRANTY & TERMS WARRANTY: 5 Year Limited Warranty on Thermoplastic
More informationMATERIAL SPECIFICATION FOR SECTIONAL STEEL HIGH MAST LIGHTING POLES
ONTARIO PROVINCIAL STANDARD SPECIFICATION METRIC OPSS 2471 NOVEMBER 2008 MATERIAL SPECIFICATION FOR SECTIONAL STEEL HIGH MAST LIGHTING POLES TABLE OF CONTENTS 2471.01 SCOPE 2471.02 REFERENCES 2471.03 DEFINITIONS
More informationModel # 338S-RDP. 7/31/2012 Page 1 of 13
Model # 338S-RDP 7/31/2012 Page 1 of 13 7/31/2012 Page 2 of 13 1675 Locust Street Red Bud, IL 62278 Phone: 618-282-8200 Fax: 618-282-8202 WARRANTY & TERMS WARRANTY: 5 Year Limited Warranty on Thermoplastic
More informationMATERIAL SPECIFICATION FOR SMOOTH WALLED STEEL PIPE
ONTARIO PROVINCIAL STANDARD SPECIFICATION METRIC OPSS 1802 NOVEMBER 2004 MATERIAL SPECIFICATION FOR SMOOTH WALLED STEEL PIPE TABLE OF CONTENTS 1802.01 SCOPE 1802.02 REFERENCES 1802.03 DEFINITIONS - Not
More informationREINFORCED CONCRETE CULVERT STORM DRAIN AND SEWER PIPE FIELD SECTION 1026
(Page 1 of 8) REINFORCED CONCRETE CULVERT STORM DRAIN AND SEWER PIPE FIELD SECTION 1026 1026.1 SCOPE. To establish procedures for the inspection of reinforced concrete pipe and the approval of modified
More informationSECTION DECORATIVE METAL RAILINGS
SECTION 05 73 00 DECORATIVE METAL RAILINGS PART 1 GENERAL 1.1 SECTION INCLUDES A. Vertical Stainless Steel Cable Railing System. B. Horizontal Stainless Steel Cable Railing System. 1.2 RELATED SECTIONS
More informationPIP STF05520 Details for Pipe Railing for Walking and Working Surfaces
TECHNICAL CORRECTION January 2017 Structural PIP STF05520 Details for Pipe Railing for Walking and Working Surfaces PURPOSE AND USE OF PROCESS INDUSTRY PRACTICES In an effort to minimize the cost of process
More informationModel #369S-PR. 8/23/2016 Page 1 of 11
Model #369S-PR 8/23/2016 Page 1 of 11 /23/2016 Page 2 of 11 1675 Locust Street Red Bud, IL 62278 Phone: 618-282-8200 Fax: 618-282-8202 WARRANTY & TERMS WARRANTY: 5 Year Limited Warranty on Thermoplastic
More informationNORTHWESTERN UNIVERSITY PROJECT NAME JOB # ISSUED: 12/12/2018
SECTION 08 1119 - STAINLESS STEEL DOOR AND FRAMES GENERAL 1.1 RELATED DOCUMENTS A. Drawings and general provisions of the Contract, including General and Supplementary Conditions and Division 01 Specification
More informationAll definitions are defined according to ANSI/AWWA C
SAN ANTONIO WATER SYSTEM SPECIFICATIONS FOR REDUCED-WALL, RESILIENT-SEATED GATE AND TAPPING VALVES FOR WATER SUPPLY SERVICE 4 IN. THROUGH 48 IN. ANSI/AWWA C515-01 July 2017 1. SCOPE This product specification
More informationModel # 5803SM. 6/15/2018 Page 1 of 5
Model # 5803SM 6/15/2018 Page 1 of 5 6/15/2018 Page 2 of 5 1675 Locust Street Red Bud, IL 62278 Phone: 618-282-8200 Fax: 618-282-8202 WARRANTY & TERMS WARRANTY: 5 Year Limited Warranty on Thermoplastic
More informationCONSTRUCTION SPECIFICATION FOR ERECTION OF POLES
ONTARIO PROVINCIAL STANDARD SPECIFICATION METRIC OPSS 615 NOVEMBER 2008 CONSTRUCTION SPECIFICATION FOR ERECTION OF POLES TABLE OF CONTENTS 615.01 SCOPE 615.02 REFERENCES 615.03 DEFINITIONS - Not Used 615.04
More informationCONSTRUCTION SPECIFICATION FOR ERECTION OF POLES
ONTARIO PROVINCIAL STANDARD SPECIFICATION METRIC OPSS 615 NOVEMBER 2008 (Reissued November 2010) CONSTRUCTION SPECIFICATION FOR ERECTION OF POLES TABLE OF CONTENTS 615.01 SCOPE 615.02 REFERENCES 615.03
More informationTECHNICAL SPECIFICATION FOR 11mtr. LONG STEEL TUBULAR POLE
Annexure-A TECHNICAL SPECIFICATION FOR 11mtr. LONG STEEL TUBULAR POLE 1.0 SCOPE 1.1 This specification covers the design, manufacture, testing at works, supply / delivery & transportation of 11 mtr long
More informationGUIDE SPECIFICATION EXETER SECURITY SHIELD SECURITY WINDOW BARRIER SYSTEM
1 GUIDE SPECIFICATION EXETER SECURITY SHIELD SECURITY WINDOW BARRIER SYSTEM 1.01 WORK INCLUDED PART 1: GENERAL A. Provide for all labor, equipment, materials and services to furnish and install SECURITY
More informationTABLE OF CONTENTS INTRODUCTION SCOPE NORMATIVE REFERENCES DEFINITIONS AND ABBREVIATIONS... 3
TITLE SPECIFICATION FOR STEEL DISTRIBUTION POLES REFERENCE REV CP_TSSPEC_033 1 DATE: NOVEMBER 2014 PAGE: 1 OF 16 TABLE OF CONTENTS Page INTRODUCTION... 2 1 SCOPE... 2 2 NORMATIVE REFERENCES... 2 3 DEFINITIONS
More informationThis specification covers the fabrication and delivery of Medium Series Traffic Signal/Pedestrian Corridor/Luminaire Davit Standards.
MANITOBA INFRASTRUCTURE AND TRANSPORTATION TRAFFIC ENGINEERING SPECIFICATION FOR MEDIUM SERIES COMBINATION TRAFFIC SIGNAL AND PEDESTRIAN CORRIDOR / LUMINAIRE DAVIT STANDARDS 1. DESCRIPTION This specification
More informationSECTION Temperature Change: 120 deg F, ambient; 180 deg F, material surfaces.
PART 1 - GENERAL 1.1 SUMMARY A. Section includes the following: 1. Handrails and guardrails. 1.2 PERFORMANCE REQUIREMENTS A. General: In engineering railings to withstand structural loads indicated, determine
More informationSECTION STRUCTURE MOUNT RAILING SYSTEM
SECTION 05520 STRUCTURE MOUNT RAILING SYSTEM Peak Fall Protection specializes in the design, engineering, fabrication, installation, and certification of fall protection safety systems. Our team of safety
More informationSST-II HYDRAULIC BI-FOLD SPECIFICATIONS
PART 1 GENERAL 1.01 DESCRIPTION A. General 1. Furnish SST-II Hydraulic Bi-Fold System complete from one manufacturer. Provide all labor, materials, tools and equipment to furnish the SST-II Bi-Fold System
More informationModel #369S-RDP. 8/23/2016 Page 1 of 11
Model #369S-RDP 8/23/2016 Page 1 of 11 /23/2016 Page 2 of 11 1675 Locust Street Red Bud, IL 62278 Phone: 618-282-8200 Fax: 618-282-8202 WARRANTY & TERMS WARRANTY: 5 Year Limited Warranty on Thermoplastic
More informationCONSTRUCTION SPECIFICATION FOR CHAIN-LINK FENCE
ONTARIO PROVINCIAL STANDARD SPECIFICATION METRIC OPSS 772 NOVEMBER 2010 CONSTRUCTION SPECIFICATION FOR CHAIN-LINK FENCE TABLE OF CONTENTS 772.01 SCOPE 772.02 REFERENCES 772.03 DEFINITIONS 772.04 DESIGN
More informationCONSTRUCTION SPECIFICATION FOR CHAIN-LINK FENCE
ONTARIO PROVINCIAL STANDARD SPECIFICATION METRIC OPSS 541 NOVEMBER 2005 CONSTRUCTION SPECIFICATION FOR CHAIN-LINK FENCE TABLE OF CONTENTS 541.01 SCOPE 541.02 REFERENCES 541.03 DEFINITIONS 541.04 SUBMISSION
More informationModel # 358PS-OP. 12/13/2013 Page 1 of 12
Model # 358PS-OP 12/13/2013 Page 1 of 12 2/13/2013 Page 2 of 12 1675 Locust Street Red Bud, IL 62278 Phone: 618-282-8200 Fax: 618-282-8202 WARRANTY & TERMS WARRANTY: 5 Year Limited Warranty on Thermoplastic
More informationModel # 362S-RDP. 9/17/2012 Page 1 of 12
Model # 362S-RDP 9/17/2012 Page 1 of 12 9/17/2012 Page 2 of 12 1675 Locust Street Red Bud, IL 62278 Phone: 618-282-8200 Fax: 618-282-8202 WARRANTY & TERMS WARRANTY: 5 Year Limited Warranty on Thermoplastic
More information