Forklift Course Pre-Reading Information. Version 2.0. March 2011
|
|
- Archibald Harvey
- 6 years ago
- Views:
Transcription
1 Forklift Course Pre-Reading Information Version 2.0 March 2011 Reading through this manual prior to sitting your forklift course will assist you in preparing for your in-class theory session and written theory assessment. Definitions: Rear-End Swing: Rear-end swing is the rapid sideways movement of the rear end of the forklift when turning the machine. The rear of the machine will swing out to the opposite side to which you are turning. The speed of rear end swing will be approximately three times that of the forklift s forward speed, so it can cause serious damage. Rated Capacity: Is the MAXIMUM weight a forklift can carry at a given height and a given load centre. Data Plate: Stability: A metal plate affixed to the forklift by the manufacturer that contains information such as the weight of the vehicle. The ability of a forklift to remain upright. Stability is the most important factor necessary for avoiding accidents. Lateral Stability: The ability of a forklift to remain upright and not tip over sideways. A load that is out of balance or on an uneven travelling surface can affect lateral stability. Longitudinal Stability: A forklift s ability to resist tipping forward. When the weight exceeds the capacity of the forklift, longitudinal stability generally exists and the forklift will tip forward. Load Centre Distance: Is the distance from the vertical face of the fork arms to the centre of gravity of the load (see diagram below). Forklift/Current/Pre-Reading Manual v1.0
2 Duty of Care: The Occupational Safety and Health Act requires that employers, employees, contractors and others exercise a duty of care toward each other. This means that EMPLOYERS must provide and maintain a working environment in which workers are not exposed to safety and health hazards. Similarly, EMPLOYEES must take reasonable care of their own safety and health, and that of others. Parts of a Forklift: Mast: Load Backrest: Overhead Guard: Data Plate: The vertical portion of the lift mechanism that raises the load into the air. The backrest of the forklift that prevents the load from falling backwards onto the driver. The overhead guard protects the operator from falling loads. A metal plate affixed to the vehicle by the manufacturer that contains information such as the weight of the vehicle and it s maximum lifting capacity.
3 Counterbalance forklift s use the front wheel axle in the same way as the fulcrum of a lever. The load is counterbalanced on one side by the weight of the machine on the other side. All the weight behind the point of balance acts as a counterweight. Pre-Start Safety Checks: Before operating a forklift, operators need to conduct a pre-start check at the beginning of each shift. This includes: Parts of the forklift (e.g. brakes, seat belt, steering, warning devices, lights, tyres, attachments); and Liquid levels e.g. hydraulic oil, brake fluid and water.
4 Safe Operation of a Forklift: All forklifts must be operated in a safe and responsible manner and within the manufacturer s guidelines as set out on the Data Plate; A seat belt must be worn at all times; Operators should always check the adjustment of rear view mirrors before moving off and then check mirrors regularly for potential hazards (e.g. pedestrians and other objects); Travel in a forwards direction wherever possible, unless for example the load on the forklift is blocking your view; Use the horn when turning around blind corners to warn people in the nearby area; Loads should always be carried as near to the ground as practicable. Turning the forklift with the load raised can cause the forklift to tip over; Always operate forklifts with the load firmly against the backrest with the mast tilted back sufficiently to prevent the load from slipping or falling; All loads that have the potential to slip or fall must be appropriately restrained with straps or shrink wrapping etc; Gas forklifts should only be used in well ventilated areas to prevent the build-up of fumes that could cause an explosion; Gas forklifts should never be refuelled whilst the engine is running as it could cause the fuel to ignite; Batteries for electric forklifts should be charged in a well ventilated area to stop the build-up of explosive gases. Similarly, you should never smoke when changing forklift batteries as the gases may ignite; When using a forklift over a roadway, footpath or public area you should use signs, barricades and safety personnel to prevent an accident from occurring; You should never raise or lower a load near or over people as it could cause an accident; The handbrake should be applied when raising or lowering the load; Make sure that the forks are centred when they are entering a pallet; Always put the heavy end of a load against the heel of the fork arms; People should only ever be raised on a forklift truck in an approved safety cage; Using attachments on forklifts are likely to reduce the lifting capacity of the machine. As such, all attachments need to be securely fastened to the forklift. The supplier of the attachment needs to then determine the lifting capacity of the forklift with the attachment fitted To avoid tipping over sideways (also known as lateral instability), operators should: - ensure loads are centred; - secure the load in appropriate manner (i.e. with straps or shrink wrapping); - carry loads as close the ground as practicable; - ensure tyres are correctly inflated (where applicable); - exercise extreme care when driving across uneven, sloping or wet surfaces. When leaving a forklift, the operator needs to ensure: - the fork arms are fully lowered, tilted slightly forward so the tips of the fork arms touch the ground; - the controls are in neutral;
5 - power is shut off; - park brakes are applied; and - the keys are removed, to prevent unauthorised use When you have finished using your forklift you should always undertake a post-operational check, to check for damage, leaks and to make sure all systems are shut down. If you suspect a problem with your forklift (e.g. missing or unreadable Data Plate, a leak in your fuel system or a crack in the heel of the Fork Arms), you should never attempt to repair it yourself, but instead you should remove the key, Tag the machine Out of Service, Isolate the machine and Report the problem to your supervisor. Electricity: The minimum distance you should keep your forklift and load away from powerlines is as follows: 0.5 metre from a live INSULATED overhead powerline of LESS than 1,000 volts; 1.0 metre from a live UNINSULATED overhead powerline of LESS than 1,000 volts; 3.0 metres from a live overhead powerline between 1,000 and 33,000 volts; 6.0 metres from a live overhead powerline greater than 33,000 volts. In the event of a forklift contacting a power line the operator should: If practical, stay in the cab and keep others away; Wait until the power is shut off before leaving the forklift; and If safe and practical, move the forklift off the power line. Data Plate Sample:
6 Stability Triangle: Forklifts have a stability triangle. A vertical line extending from the center of gravity of the vehicle and load combination must be inside of the stability triangle to prevent the forklift from tipping forward, falling sideways or dropping its load, as shown in the diagram below. The following can affect the centre of gravity and cause it to shift outside of the Stability Triangle, causing the forklift to tip over: - Load exceeding the rated capacity; - Unevenly stacked load; - Travelling down a ramp with the load facing downhill; - Raising a load on one fork only; - The addition of attachments; or - Slinging loads beneath the forks.
7 When travelling up a ramp, always ensure the load is facing uphill to ensure the load doesn t slip or fall and to maintain forklift stability at all times. When travelling down a ramp, always ensure the load is facing uphill to ensure the load doesn t slip or fall and to maintain forklift stability at all times.
8 Always use your horn around blind corners to ensure the safety of yourself and others. When travelling with a large load that obscures your vision, you should either travel in reverse, or use an experienced person as a spotter to guide you. Examples of some common forms of attachments used on forklifts:
9 Example of Load Centre calculation: The following forklifts are rated at 2,000kgs at a load centre of 600mm. Load centre is calculated by dividing the length of the load by two. Therefore, Forklift A has a load centre of 700mm (i.e divided by 2), Forklift B is 600mm (1200 divided by 2) and Forklift C 500mm (1000 divided by 2) Forklift A is overloaded, as it s Load Centre is 700mm, which is 100mm in excess of the rating of the forklift.
TLILIC2001 Licence to Operate a Forklift Truck
TLILIC2001 Licence to Operate a Forklift Truck Multiple Choice Questions PARTICIPANT NAME : Forklift Multiple Choice Questions V080217 Page 1 of 13 LF Forklift Work Sheet Trainee to circle the correct
More informationForklift Operator Safety Safe Operation and Pre-Use Inspection
EXERCISE #1 Target Audience: Forklift operators Exercise Objective: Evaluate understanding of safe forklift operation and pre-use inspection criteria Instructions: Answer the questions below. Review your
More informationFORKLIFT TRUCK ASSESSMENT INSTRUMENT 2000 NATIONAL CERTIFICATE OF COMPETENCY. WorkCover. Watching out for you.
FORKLIFT TRUCK NATIONAL CERTIFICATE OF COMPETENCY ASSESSMENT INSTRUMENT 2000 WorkCover. Watching out for you. Disclaimer This publication contains information regarding occupational health, safety, injury
More informationIntroductory Guide to Driving a Forklift Truck Counterbalance or Reach
Introductory Guide to Driving a Forklift Truck Counterbalance or Reach Contents Page Introduction from Specialised Forklift 3 Your Responsibilities 4 Proper Forklift Use 4 Know the Risks 4 Safety Checks
More informationQuestions for Written Evaluation
Questions for Written Evaluation Name: Date: 1 When must the operator complete the pre-shift safety checklist? a. At the end of the operators shift b. At the beginning of the operators shift and/or before
More informationLicence to Operate a Forklift Truck TLILIC2001 PARTICIPANT MANUAL
Licence to Operate a Forklift Truck TLILIC2001 PARTICIPANT MANUAL TLILIC2001 V080217 Page 1 of 51 Contents Introduction... 5 Eligibility for a High Risk Work (HRW) Licence... 5 HRW Licence Class (LF) -
More informationSafety Information for The University of North Carolina at Chapel Hill
Job Safety Analysis Safety Information for The University of North Carolina at Chapel Hill JOB SAFETY ANALYSIS TOPIC: Energy Services CoGeneration Facility- Operating a Forklift; Mechanical Maintenance
More informationHS709 Materials Handling Guideline
HS709 Materials Handling Guideline Policy Hierarchy link Responsible Officer Contact Officer Superseded Documents File Number 2016/00370 Work Health and Safety Act 2011 Work Health and Safety Regulation
More informationMock Theory Paper. Counterbalance Lift Truck - LTG1 V Copyright 2017 RTITB. All rights reserved
Mock Theory Paper V1.0917 Mock Theory Paper Q1. Name 4 checks you must make to a load before picking it up. a. Its weight b. Its load centre c. The location where you are to collect or deposit the load
More informationForklift Operator Safety Program
Forklift Operator Safety Program Program originated: 9/2009 Last updated: 1/2015 Wendel Reece University Safety Manager FORWARD The University of Northern Iowa Forklift Operator Safety Program is a guide
More informationFORKLIFT TRAINING MANUAL. Safety & Risk Services Unit Human Resources Service Group UPD Building, Third Floor Phone:
FORKLIFT TRAINING MANUAL Safety & Risk Services Unit Human Resources Service Group UPD Building, Third Floor Phone: 408-924-2150 Revised: 10/2005 Notes OSHA REQUIREMENTS: FORKLIFT OPERATOR TRAINING The
More informationTLILIC2002A Licence to Operate an Order Picking Forklift Study Guide
TLILIC2002A Licence to Operate an Order Picking Forklift Study Guide Page 1 Contents A note from the TAG team.3 Introduction.3 Legislative requirements.4 Fundamental principles 5 Planning your work 14
More informationForklift safety reducing the risks
Department of Justice and Attorney-General www.worksafe.qld.gov.au Forklift safety reducing the risks Workplace Health and Safety Queensland CONTENTS Introduction 2 Forklift dangers 2 About this guide
More informationPOWERED MOBILE EQUIPMENT PROGRAM
POWERED MOBILE EQUIPMENT PROGRAM INTRODUCTION/OVERVIEW The safe operation of material handling and/or personnel lifting equipment on and around the jobsite is essential. To help prevent injury to fellow
More informationThis is an awareness class only. This will not make you a licensed operator.
Material Handling This material was produced under grant [SH22236SH1]from the Occupational Safety and Health Administration, U.S. Department of Labor. It does not necessarily reflect the views or policies
More informationForklift Operator Best Practice Guide Forklift Training Centre Lifting the Standards
Forklift Operator Best Practice Guide Forklift Training Centre Lifting the Standards 2016 FTC South NZ Ltd FORKLIFT SAFETY Page 1 FORWARD >>>>>>>>>> This booklet is not a prime reference for forklift training
More informationTechnical Test Theory Industrial Forklift Truck A16
1 a) What is the minimum distance allowed near open trenches when travelling with a forklift and b) explain why? 2 What are the THREE actions or stages that a forklift operator undertakes during pre-use
More informationPOWERED INDUSTRIAL TRUCKS Forklift Safety Plan
South Central College Faribault Campus 1225 Third St. SW Faribault, MN 55021-5782 North Mankato/Mankato Campus 1920 Lee Boulevard N. Mankato, MN 56002-1920 Adoption Date: 07-08-15 Revision Date: 01-04-17
More informationLeveler for Compact Utility Loaders
Form No. 3353-817 Rev A Leveler for Compact Utility Loaders Model No. 22419 890001 and Up Operator s Manual Register your product at www.toro.com Original Instructions (EN) Contents Page Introduction................................
More informationFORKLIFT OPERATOR SAFETY
Table of Contents SECTION 1. TRAINING PROGRAM INTRODUCTION..................3 Training Objectives...........................................3 Rationale for Training.........................................3
More informationFACILITIES MANAGEMENT OFFICE OF ENVIRONMENTAL HEALTH AND SAFETY AERIAL WORK PLATFORM POLICY 09/06/17 Last Revision
FACILITIES MANAGEMENT OFFICE OF ENVIRONMENTAL HEALTH AND SAFETY AERIAL WORK PLATFORM POLICY 09/06/17 Last Revision 1. Intent This program has been developed to reduce the risk of physical injury or property
More informationPowered Industrial Trucks Safety Checklist
Powered Industrial Trucks Safety Checklist This safety checklist will help employees and supervisors follow minimal safety practices. This list is not meant to be comprehensive nor is it meant to form
More informationStandards of Practice Powered Industrial Truck/Forklift
Standards of Practice Powered Industrial Truck/Forklift Document Authority: EH&S Director Document Custodian: EH&S Director Effective Date: 2/1/2018 Issuing Dept: College of Agriculture EH&S Office Next
More informationCompany s Name: GHI Warehouse Date of Risk Assessment:
Company s Name: GHI Warehouse Date of Risk Assessment: 10-01-06 What are the hazards? Falls from height Who might be harmed and how? Staff could suffer severe or even fatal injuries if they fell whilst
More informationSafe Work Procedure for installation of
Safe Work Procedure for installation of external cladding This procedure has been formulated to cover safe systems of work for the installation of external cladding. This instruction will be used to reduce
More informationGuidelines for the safe unloading and storage of Polyolefins in packed form V1 August 2012
Guidelines for the safe unloading and storage of Polyolefins in packed form V1 August 2012 Page 1 CONTENTS CONTENTS...2 INEOS O&P CUSTOMER COMMITMENT...3 1: Purpose of this document...4 2: Driver safety
More informationToday we re going to talk about working safely around forklifts. Forklifts are essential pieces of equipment that help us move mountains of heavy
Today we re going to talk about working safely around forklifts. Forklifts are essential pieces of equipment that help us move mountains of heavy materials. But forklifts are also dangerous especially
More informationFORKLIFT SAFETY REDUCING THE RISK 2ND EDITION
FORKLIFT SAFETY REDUCING THE RISK 2ND EDITION FEBRUARY 2006 CONTENTS Introduction.................................... 1 1. Forklift stability: the facts.................... 2 2. Forklift instability: the
More informationSK3600 Push Back System
SK3600 Push Back System Safe Operating Procedures User Handbook This handbook contains important information for the safe and efficient use of push back rack systems. All operators must review and understand
More informationTRAINING OPERATORS AND INSTRUCTORS OF POWERED INDUSTRIAL LIFT TRUCKS (FORKLIFTS)
HEALTH AND SAFETY IN EMPLOYMENT ACT 1992 APPROVED CODE OF PRACTICE FOR TRAINING OPERATORS AND INSTRUCTORS OF POWERED INDUSTRIAL LIFT TRUCKS (FORKLIFTS) OCCUPATIONAL SAFETY & HEALTH SERVICE DEPARTMENT OF
More informationHazards Outside The Laboratory: Loading Dock Safety
Hazards Outside The Laboratory: Loading Dock Safety Levi Harmon, CSP Safety Engineer Occupational Health, Safety And Injury Prevention ljh252@cornell.edu 607-220-9532 Introduction The University s Loading
More informationUniversal-Fit LIFT HOOK - Model 1371B
4101 GARLAND DR, FORT WORTH, TX 76117 Ph 817-485-6073 Fax 817-428-6008 www.starindustries.com Bulletin LH- OM0510B Universal-Fit LIFT HOOK - Model 1371B Installation, Use & Safety Precautions SPECIFICATIONS:
More informationGuidelines for Working in Loading Docks
1.0 INTRODUCTION Loading docks are busy areas, where trucks, trailers, pedestrians, lifting devices, and other equipment typically move throughout the area on a frequent basis. Serious or even fatal injuries
More informationKENNECOTT UTAH COPPER
14.5.1 INTRODUCTION 14.51.1 This standard specifies the safety controls associated with freight / cargo loading operations at KUC properties and presents working references supporting KUC standards and
More information~~- 'ill/! /10. Risk Management and Safety (RMS) Powered Industrial Truck Program August 11,2010. Date. Prepared By: Safety Specialist III RMS
UNIVERSITY University OF NEVADA LAS VEGAS of Nevada Las Vegas Risk Management and Safety (RMS) Powered Industrial Truck Program August 11,2010 'ill/! /10 Prepared Safety Specialist III RMS Date Dale I
More informationForklift inspection checklist template word
Forklift inspection checklist template word The Borg System is 100 % Forklift inspection checklist template word Download free forklift checklists. Includes Forklift Pre-Start Checklist, Daily Safety Checklist,
More informationAerial and Scissor Lift
This document is intended to provide basic safety guidelines for the Physical Plant Department at Community College of Allegheny County. The information provided in this guide may vary by site. Version
More informationSAFE OPERATION FORKLIFT TRUCKS
SAFE OPERATION OF FORKLIFT TRUCKS (Distant Learning Version) MATERIALS HANDLING AND LOGISTICS By Brad Porcellato. Contact Porcellato Engineering at 604.526.7964 for payment processing instructions. Certificates
More informationFOUR-WAY REACH TRUCK UFS TERGO AC POWER PLUS FOR LOADING/UNLOADING, TRANSFER AND STACKING OF LONG AND BULKY GOODS
FOUR-WAY REACH TRUCK UFS TERGO AC POWER PLUS FOR LOADING/UNLOADING, TRANSFER AND STACKING OF LONG AND BULKY GOODS WIDE, LONG LOADS IN NARROW AISLES Long, bulky goods. Wide loads and long loads need not
More informationMX Series. 4,000 6,000 lbs. ICE Counterbalanced Forklift
MX Series. 4,000 6,000 lbs. ICE Counterbalanced Forklift 2 When efficiency rules. From ramping up manufacturing output to keeping the shelves stocked, today s fast-paced supply chain requires materials
More informationDiesel/LPG stackers DFG/TFG and with torque converter to 3500 kg capacity.
Diesel/LPG stackers DFG/TFG 316 320 and 425 435 with torque converter. 1600 to 3500 kg capacity. Advantage: High quality manufacturing. Extremely robust construction. Uncompromising quality. Jungheinrich
More informationGUIDELINES. Guidelines. Lifting. Guidelines for the safe management and the thorough examination of lift trucks
Lifting GUIDELINES Guidelines Guidelines for the safe management and the thorough examination of lift trucks (Document Reference: LG 4 Dated 19/11/03) FOREWORD The purpose of these Guidelines is twofold.
More informationScissor Lift Safety for Clients and Employees or ARS
ADVANCED RESOURCE SOLUTIONS INNOVATIVE SOLUTIONS FOR PROJECT SUCCESS Scissor Lift Safety for Clients and Employees or ARS Added 1/20/2017 Employees: Guidelines addressed in OSHA 1926.451; 1926.452(w);
More informationStandards of Performance. Mariane Ewbank Chairperson Standards and Customs WG
Standards of Performance Mariane Ewbank Chairperson Standards and Customs WG Please hold for instructions to open packs 1 and 2 Can we consider this an official doc???? Second version And this invoice?
More informationFPU SYSTEMS OPERATION MANUAL (INCLUDING REPAIR PARTS & SPECIAL TOOL LIST) SMALL CABINET MODULE (SCM) BOH FPU Field Pack-up Units
FPU SYSTEMS OPERATION MANUAL (INCLUDING REPAIR PARTS & SPECIAL TOOL LIST) SMALL CABINET MODULE (SCM) BOH FPU Field Pack-up Units SMALL CABINET MODULE (SCM) BOH FPU Systems BOH ENVIRONMENTAL LLC 14520 Avion
More informationDRIVER CODE OF CONDUCT FOR TRUCK AND HEAVY VEHICLE OPERATORS PERFORMING WORK FOR OR ASSOCIATED WITH CDM LOGISTICS
DRIVER CODE OF CONDUCT FOR TRUCK AND HEAVY VEHICLE OPERATORS PERFORMING WORK FOR OR ASSOCIATED WITH CDM LOGISTICS 1. INTRODUCTION 1.1. General This driver code of conduct applies to all CDM LOGISTICS personnel
More informationBOH FPU Systems BOH ENVIRONMENTAL LLC Avion Parkway, Suite 220 Chantilly, VA POC Jim Stokes (703)
FPU SYSTEMS OPERATION MANUAL BOH QUADCON MODULES, ADAPTERS and RESTRAINT SYSTEM BOH FPU Field Pack/up Units (INCLUDING REPAIR PARTS & SPECIAL TOOL LIST) BOH FPU Systems BOH ENVIRONMENTAL LLC 14520 Avion
More informationBulk Bag Handling & Safety. EPS EXPO 2005 April Jeff Russell NOVA Chemicals
Bulk Bag Handling & Safety EPS EXPO 2005 April 20-21 Jeff Russell NOVA Chemicals Discussion Topics Bulk Bag Construction/Features Trailer Unloading Visual Bag Inspection Safe Patching/Repair Forklift Safety
More informationForklift Safety Guide
S T A T E O F W A S H I N G T O N Forklift Safety Guide Learning the safe e way y to operate te a for orklift may save e your life Forklift Safety Guide STATE OF WASHINGTON WISHA Services A Mission to
More informationPowered pallet trucks
W_BM1512_W_BM1512 09-07-13 17:56 Pagina 1 Powered pallet trucks 1.6 2.5 tonnes quality reliability value for money W_BM1512_W_BM1512 09-07-13 17:56 Pagina 2 warehouse it s what we do It should come as
More informationLEARNER GUIDE. Telescopic Materials Handler (TMH) PO Box 2026 Mountain Gate VIC 3156 p: ABN: RTO: 21396
LEARNER GUIDE Telescopic Materials Handler (TMH) PO Box 2026 Mountain Gate VIC 3156 p: 03 9763 5449 ABN: 37 106 951 900 RTO: 21396 ASSESSOR GUIDELINES GENERAL 1. Introduction 1.1 Scope These general guidelines
More informationIntelligent Performance. The Right Fit for Your Operation. Performance Throughout.
ESR 5200 SERIES Intelligent Performance The Crown ESR Series reach truck's smart design, thoughtful features and intuitive controls help operators work more efficiently throughout their operation. Available
More informationPART 22 POWERED MOBILE EQUIPMENT GENERAL. Application 22.1 This Part applies to every workplace where powered mobile equipment is used.
Manitoba Lift Truck - Chariot de levage industriel This material has been extracted from the Acts and Regulations of the Province to help students understand the subject. It is not an official source of
More informationSafety Policy and Procedure
Safety Policy and Procedure Policy Number: 030 Authorized By: The Cianbro Companies Alan Burton Title: Placing Concrete Effective Date: 10/01/94 Page 1 of 5 1 Status 1.1 Update of existing policy, effective
More informationNPP16-20N2, NPP20MR, NPV20-25NH, NPV20ND, NPR20N, NPS20N. Power pallet trucks tonnes
NPP16-20N2, NPP20MR, NPV20-25NH, NPV20ND, NPR20N, NPS20N Power pallet trucks 1.6-2.5 tonnes ADD VERSATILITY TO YOUR WAREHOUSE If smooth and efficient horizontal transport is an important element of your
More informationCAMON C500 STUMP GRINDER IMPORTANT PLEASE READ CAREFULLY
CAMON C500 STUMP GRINDER IMPORTANT PLEASE READ CAREFULLY OPERATOR MANUAL Teknol House, Victoria Road, Burgess Hill RH15 9LH T: 01444 247689 F: 01444 871612 I: www.tracmaster.co.uk OPERATION Operation Before
More informationOSHA Update - Powered Pallet Trucks
Thompson & Johnson Equipment Co., Inc. June 2006 OSHA Update - Powered Pallet Trucks You have to train your forklift operators in a formal classroom setting and hands-on training courses using each style
More informationRider Operated Counterbalance and Reach Lift Trucks (ABA categories: B1, D1 & D2) Basic Operating Skills Test
Rider Operated Counterbalance and Reach Lift Trucks (ABA categories: B1, D1 & D2) Basic Operating Skills Test V1.1 BASIC OPERATING SKILLS TEST Rider Operated Counterbalance and Reach Lift Trucks Contents
More informationWoolworths Meat Company Driver Induction
Woolworths Meat Company Driver Induction Introduction Introduction Welcome! Today, you re going to spend some time looking at the types of things you ll need to know to fulfil your role as a driver for
More information4000 SERIES COUNTER- BALANCED TRUCKS SIT-DOWN
4000 SERIES COUNTER- BALANCED TRUCKS SIT-DOWN BUILT TO PERFORM. DESIGNED TO WORK TOGETHER. For 90+ years, Raymond has built a reputation based on top-notch quality, reliability and exceptional customer
More informationSafety on Heights: Our Policy
11/17/14 Safety on Heights: Our Policy Only volunteers over the age of 18 are allowed to work on heights of more than six feet off the ground. This includes all work on scaffolds. Only volunteers who are
More informationTHE PICK FOR A NEW SOLUTION
ELECTRIC POWERED ORDER PICKING TRUCK 8FBP 0.7 to 1.5 ton THE PICK FOR A NEW SOLUTION Get full support for order-picking operations at food warehouses, logistics centers, wholesalers, and a wide range of
More informationSAFE WORK PROCEDURE: MOBILE ELEVATED WORK PLATFORMS (MEWP)
Rev: 01 Date: March 2017 Page: 1 of 8 SAFE WORK PROCEDURE: MOBILE ELEVATED WORK PLATFORMS (MEWP) A. OVERVIEW: Safe Work Procedures are crucial to preventing workplace injuries and accidents. Safe Work
More informationUnderstanding Materials Handling Applications, Solutions for the Paper Industry
Solutions for the Paper Industry This white paper explores some of the environmental impacts and operating conditions typically found in the paper products industry. Also included is an overview of some
More informationSITE SAFETY RULES - SILVERSTONE CLASSIC 2018
SITE SAFETY RULES - SILVERSTONE CLASSIC 2018 The following is an outline of the Safe Working Requirements for all Companies, staff and any other persons for this event. Please note that the terms Company
More informationLIST OF PUBLISHED STANDARDS
Report : 08-0-7 Of 6 LST OF PUBLSHED STNDRDS nt 0 5:00/SO 500:007 Earth-moving machinery - Rubber-tyred machines - Steering requirements 00-0-0 0-09-09 55:00/SO 065:008 59:008/SO 5006:006 Earth-moving
More information37400 Garfield Rd, Ste. 300, Clinton Twp., MI Phone /Fax e-mai l
EXECUTIVE SUMMARY In the time period of October 20, 2004 to October 27, 2004, Mr. Brian Jaynes of Pinnacle Engineering, Inc., visited the CLIENT Distribution Facilities in New York and Pennsylvania. During
More informationSawmill Safety & Health. Presented By: John Boysen Safety Consultant OHSA Consultation Program
Sawmill Safety & Health Presented By: John Boysen Safety Consultant OHSA Consultation Program Objectives To gain awareness of the OSHA requirements. To understand how to apply those requirements. To understand
More informationDCL-Series Drum Carriers Instruction Manual
Vestil Manufacturing Corp. 2999 North Wayne Street, P.O. Box 507, Angola, IN 46703 Telephone: (260) 665-7586 -or- Toll Free (800) 348-0868 Fax: (260) 665-1339 www.vestilmfg.com e-mail: sales@vestil.com
More informationExcavator Safety Training
Excavator Safety Training As with all heavy equipment, an operator using an excavator must be aware of his surroundings at all times. He must also follow all safety precautions and protocols established
More informationPARIS 12 October 2011
Rail/road combined transport How to fasten a load 1. Current prescriptions for fastening ( safe loading in accordance with regulations) 2. Fastenings in the field PARIS 12 October 2011 ( non-compliant
More informationScaffolding. Safety Guide. STOP! Before you climb
Scaffolding Safety Guide Printed FEB 2015 rebr. AUG 2016 Contents Safety Guide Disclaimer... 1 Safety Guide Objectives... 2 Roles & Responsibilities of Workplace Parties Employers, Supervisors, Workers...
More informationESC-AD 3,000 4,000 lbs. Three Wheel Stand
ESC-AD 3,000 4,000 lbs. Three Wheel Stand Achieve best-in-class status. Your business is growing at a faster pace than ever, bringing some very real challenges. Managing seemingly infinite SKUs, a growing
More informationGUIDANCE ON THE SELECTION OF APPROPRIATE WORK EQUIPMENT FOR WORK AT HEIGHT ACTIVITIES WITHIN A COLD STORE ENVIRONMENT
GUIDANCE ON THE SELECTION OF APPROPRIATE WORK EQUIPMENT FOR WORK AT HEIGHT ACTIVITIES WITHIN A COLD STORE ENVIRONMENT This guidance is issued jointly by the BFFF and the FSDF and is supplementary guidance
More informationIndustry guidance for the safe operation of tilt-tray vehicles
Industry guidance for the safe operation of tilt-tray vehicles This document provides practical advice on meeting the Duty of Care requirements of the Occupational Safety and Health Act 1984 (the Act)
More informationLevel 2 NVQ Diploma in Construction Plant or Machinery Maintenance (Construction)
Level 2 NVQ Diploma in Construction Plant or Machinery Maintenance (Construction) Qualification Specification ProQual 2017 Contents Page Introduction 3 Qualification profile 3 Qualification Structure 4
More informationEnvironmental, Health and Safety Policy for Contractors
Environmental, Health and Safety Policy for Contractors The attached policy is a tool to help contractors understand and comply with RBC's Environmental, Health and Safety rules. The information that follows
More informationCESAB B tonne
CESAB B200 1.0-1.5 tonne Electric Powered Forklift Compact and manoeuvrable another way Class leading compactness and manoeuvrability enhance productivity Load capacities from 1.0 up to 1.5 tonnes 3 wheel
More informationUser Manual Read carefully before operating the Manubal
MANUBAL V60 User Manual Read carefully before operating the Manubal UK 365509 AA - 0511 Original instructions Dear user, We thank you for placing your trust in our product and hope you will find your
More information4000 SERIES COUNTER- BALANCED TRUCKS SIT-DOWN
4000 SERIES COUNTER- BALANCED TRUCKS SIT-DOWN BUILT TO PERFORM. DESIGNED TO WORK TOGETHER. For 90+ years, Raymond has built a reputation based on top-notch quality, reliability and exceptional customer
More informationPOWERED INDUSTRIAL TRUCK TRAINING. James Steinmeyer. A Research Paper
POWERED INDUSTRIAL TRUCK TRAINING by James Steinmeyer A Research Paper Submitted in Partial Fulfillment of the Requirements for the Master of Science Degree in Training and Development Approved for Completion
More informationCLIMA AGR. Mobile Aluminium Tower with Climbing Frames 1450/850 Camlock Advanced Guardrail USER GUIDE
CLIMA AGR Mobile Aluminium Tower with Climbing Frames 1450/850 Camlock Advanced Guardrail USER GUIDE Contents Safety First Safety Checklist Quantity Schedules Assembly and Dismantling Procedure Toe Boards
More informationPROCUREMENT OF FORK LIFT. Yale Inc Sullivan Drive Greenville, NC Item Description Model No. GP050VX.
Ernest N. Morial New Orleans Exhibition Hall Authority 900 Convention Center Boulevard New Orleans, LA 70130 ADDENDUM NO. One (1) Project Name: Procurement of Fork Lift Contract No.: C-1320 Date: April
More informationNEVER REMOVE THE SAFETY GUARDS
Page 1 of 5 Name Recommended Use Designed for cutting stumps up to 200 mm above ground and 120 mm below ground. Maximum Stump diameter 300 mm. NOT suitable for stumps surrounded by rocks, stones, concrete
More informationSTANDARD OPERATIONAL PROCEDURES
VALLETTA GATEWAY TERMINALS LTD STANDARD OPERATIONAL PROCEDURES ----- GUIDELINES TO HEALTH AND SAFETY PRACTICES FOR RO-RO OPERATIONS HEALTH AND SAFETY UNIT - 2007 Forward The main objective of these guidelines
More informationIS IT TIME TO UPGRADE YOUR FORKLIFT? A Comprehensive Guide to Optimizing Your Uptime
IS IT TIME TO UPGRADE YOUR FORKLIFT? A Comprehensive Guide to Optimizing Your Uptime Guide to Optimizing Your Uptime TABLE OF CONTENTS Signs Your Forklift Needs to Retire... 2 The Economic Life of a Forklift....
More informationOperator s Manual for Morse Heavy-Duty Kontrol-Karrier with 3-Piece Drum Holder
CONTENTS Page Receiving Procedures.................... 1 Warranty............................. 1 Safety Information..................... 1-2 Machine Description................... 3 Operating Instructions....................
More informationElectric lift trucks the complete range.
Electric lift trucks the complete range. Three-wheel and four-wheel counterbalance electric lift trucks to suit every application. An electric counterbalance truck for every application. Choosing the right
More informationUser Guide. Scaffold Trolley
User Guide Scaffold Trolley Permaquip Ltd Brierley Industrial Park, Stanton Hill, Sutton-In-Ashfield, Nottinghamshire, NG17 3JZ Tel: +44 (0) 1623 513349 Fax: +44 (0) 1623 517742 E-mail: sales@permaquip.co.uk
More informationBobcat Service 763, 763H Skid Steer Service Shop Manual Workshop Repair Book #1 - PDF Service Manual
Bobcat Service 763, 763H Skid Steer Service Shop Manual Workshop Repair Book #1 - PDF Service Manual DOWNLOAD HERE "Bobcat Service 763, 763H Skid Steer Service Shop Manual Workshop Repair Book #1 - PDF
More informationREFERENCE ID: AGR / Q
QUALIFICATIONS PACK - OCCUPATIONAL STANDARDS FOR AGRICULTURE Contents What are Occupational Standards(OS)? OS describe what individuals need to do, know and understand in order to carry out a particular
More informationForklift inspection checklist template word
P ford residence southampton, ny Forklift inspection checklist template word Forklift Checklist. By Taylor Peterson / Jan 1,. Daily Inspection.. Operators verify that the forklift truck has the capacity
More informationWork Instruction Pontiac LOC Version 1.0 WI-B404 Bulk Hi-Lo Picker April, 07
This section describes the process a Hi-Lo Operator / Picker will go through on a "typical" cycle for Bulk. Equipment: 1. Hi-Lo 2. Pen 3. Marker 4. Clipboard General Guidelines: 1) Seat belts will be used
More informationBOOM-SUPPORTED ELEVATING WORK PLATFORM PROGRAM
Page: 1 of 7 1.0 PURPOSE and APPLICABILITY 1.1 It is the policy of the University of Pennsylvania in coordination with the Office of Environmental Health and Radiation Safety to provide the University
More informationHM-Series. Dock Leveler. Owner s/user s Manual
HM-Series Dock Leveler Owner s/user s Manual POWERAMP Division of Systems, Inc. W194 N11481 McCormick Drive Germantown, WI 53022 800.643.5424 fax: 262.257.7349 www.docksystemsinc.com techservices@docksystemsinc.com
More informationLAST REVIEWED 05/3/13 CHEVRON
TOOL TYPE GEOGRAPHY US MODEL POLICY LAST REVIEWED 05/3/13 SOURCE: CHEVRON MODEL POLICY FOR WORKING SAFELY NEAR OVERHEAD POWER LINES PROBLEM: Risk of contact with overhead power lines is a major safety
More information- 2 - GUIDELINES FOR SAFE UNLOADING OF 20 LINED BOX CONTAINERS CONTENTS
GUIDELINES FOR SAFE UNLOADING OF 20 FOOT LINED ISO BOX CONTAINERS V1 September 2016 - 2 - CONTENTS 1: INEOS O&P CUSTOMER COMMITMENT 3 2: INEOS O&P SAFETY POLICY 4 3:TYPE OF DELIVERY 5 4:RISKS 8 4: UNLOADING
More informationLoading Arm Installation, Maintenance & Safety Manual
Loading Arm Installation, Maintenance & Safety Manual Version Loading Arm Hot Line: 1-800-547-9393 Dear OPW Customer: Thank you for selecting OPW Engineered Systems, Inc. ("OPW"), and giving us the opportunity
More informationPAGE 1 OF 10 HEALTH, SAFETY & ENVIRONMENTAL MANUAL PROCEDURE: S370 Mobile Cranes Procedure REV /14/2012
PAGE 1 OF 10 PURPOSE: MOBILE CRANES PROCEDURE To establish a procedure that provides guidelines that constitute safe operation of mobile cranes. It is not all encompassing or intended to replace common
More informationRISK ASSESSMENT As exhibitions and events are deemed as hazardous environments, it is a legal requirement that all exhibitors and contractors
RISK ASSESSMENT As exhibitions and events are deemed as hazardous environments, it is a legal requirement that all exhibitors and contractors undertake a suitable and sufficient Risk Assessment prior to
More information