Order by phone Order on-line Order by fax Website

Transcription

1

2 Hettich Mikro 120 Microcentrifuge Low cost, compact microcentrifuge designed to process 12x1.5/2.2ml microtubes at high speeds. The Mikro 120 has exceptionally fast run up and braking rates, a pulse key and the ability to vary the speed and time of each run. A brush-less induction drive means both smooth and quiet operation. The Mikro 120 is supplied with a 12 place angle rotor that includes a lid. Microprocessor controlled with digital display Maintenance-free induction drive for smooth and quiet operation Pulse key Motor overheating protection Imbalance switch-off Maximum capacity 12x1.5/2.2ml Maximum RPM 14,000 Maximum RCF, x g 15,558 Dimensions (hxwxd), mm 199x231x292 Weight, kg Mikro 120 microcentrifuge, with rotor for 12x1.5/2.2ml tubes POA Accessories Inserts for ml tubes (pack of 6) POA Inserts for ml tubes (pack of 6) POA Inserts for 1.5ml tubes (pack of 6)* POA * This adaptor is not essential but can help protect some tubes from breakage at higher g forces EBA 21 Bench Centrifuge Low cost, high-speed, small bench centrifuge capable of processing up to 6x50ml tubes. In addition to larger volumes the unit will also handle up to 30x1.5/2.2ml microtubes. The centrifuge is fully microprocessor controlled with a brush-less motor and digital display. It can be operated by a timer or, for short cycles, by using the pulse key. Microprocessor controlled with digital display Maintenance-free induction drive for smooth and quiet operation Maximum capacity 6x50ml Maximum RPM 18,000 Maximum RCF, x g 23,900 Dimensions (hxwxd), mm 263x280x326 Weight, kg EBA 21 Bench top centrifuge, without rotor POA Accessories Cat. No. Description Maximum RPM/RCF Capacity Price Angle rotor with sealed lid 14,000/21,255 x g 30x1.5/2.2ml POA Angle rotor with sealed lid 15,000/21,885 x g 24x1.5/2.2ml POA Insert for ml tubes (pack of 6) POA Insert for ml tubes (pack of 6) POA Angle rotor 6,000/3,904 x g 6x50ml POA Insert for 15ml Falcon POA Insert for 50ml Oakridge POA Insert for 50ml Falcon POA (only 3 tubes/rotor) Angle rotor 6000/4,146 x g 12x15ml, POA 6x15ml Falcons 199

3 Hettich Mikro 200/200R Microcentrifuges Compact bench top microcentrifuges designed to process ml microtubes at high speeds. With super fast run up and braking rates and capacities of up to 30 tubes, overall processing times are greatly reduced. The Mikro 200 is supplied in both air cooled and refrigerated versions and is equipped with an automatic locking system guaranteeing secure lid closure every time. With two angle rotors for 24x1.5/2.2ml and 30x0.5ml tubes, and a third designed specifically to take PCR strips, the Mikro 200 will easily cover all high speed, small volume applications. Microprocessor controlled with digital display Maintenance-free induction drive for smooth and quiet operation Pulse key Automatic lid locking Fast Cool function (Mikro 200R) Autoclavable, aerosol tight rotor options Model Mikro 200 Mikro 200R Maximum capacity 24x2.2ml 24x2.2ml Maximum RPM 14,000 14,000 Maximum RCF, x g 18,626 18,626 Temperature range -10 C to +40 C Dimensions (hxwxd), mm 260x275x x281x547 Weight, kg Mikro 200 microcentrifuge, without rotor POA Mikro 200R refrigerated microcentrifuge, without rotor POA Accessories Cat. No. Description Maximum Capacity Price RPM/RCF Angle rotor with lid 14,000/ 24x1.5/2.2ml POA 18,626x g ( ml with inserts) Inserts for ml tubes POA (pack of 6) Inserts for ml tubes POA (pack of 6) Inserts for 1.5ml tubes POA (pack of 6)* Angle rotor with lid 14,000/ 30x ml POA 17,749x g Aerosol tight lid for POA and Angle rotor** 14,000/ 4x 0.2ml POA 12,490x g (PCR strip of 8) or 32x0.2ml * This adaptor is not essential but can help protect some tubes from breakage at higher g forces ** An optional lid is available for rotor , please contact our Technical Office on for details

4 Hettich Mikro 22 and Mikro 22R Micro-centrifuges Small benchtop micro-centrifuges designed to process ml microtubes at high speeds. With super-fast run-up and braking rates and capacities of up to 60 tubes, overall processing times are greatly reduced. The refrigerated version has the additional advantage of being able to handle larger tubes of up to 50ml capacity. Both models feature the unique Hettich lid locking mechanisms. With this system, the lid can be securely closed and locked in seconds, with the minimum of effort. Unique, easy-lock, lid closing mechanism Fully digital and microprocessor controlled Maintenance-free induction drive for smooth and quiet operation Impulse key Able to maintain 4ºC even at maximum speed (refrigerated version) CE marked s Model Mikro 22 Mikro 22R Maximum capacity, ml 60x2.2 60x2.2 Maximum speed, rpm 18,000 18,000 Maximum RCF, x g 31,880 31,880 Temperature range -20 C to +40 C Dimensions (hxwxd), mm 276x332x x332x619 Weight, kg Rotor sold separately Cat. No Price POA POA Please note: Mikro 22 & Mikro 22R are both supplied without rotors Accessories Cat. No. Description Max RPM/Max RCF Capacity, ml Price Mikro 22 & Mikro 22R model accessories Angle rotor with lid 18,000/23,907 12x POA Angle rotor with sealed lid 14,000/20,600 30x POA Angle rotor with sealed lid 14,000/21,255 48x POA Angle rotor with sealed lid 18,000/31,514 24x1.5ml POA Swing out (high speed) rotor 13,000/18,516 24x POA Inserts for ml tubes POA (pack of 6) Inserts for ml tubes POA (pack of 6) Drum rotor 13,000/14,150 (see inserts) POA Insert block (6 per rotor) 60x POA Insert block (6 per rotor) 192x POA Insert block (6 per rotor) 126x POA Mikro 22R Refrigerated model accessories only Angle rotor 6,000/3,904 6x50 POA Insert for 15ml Falcon POA Insert for 50ml Oakridge POA Insert for 50ml Falcon, 3 per rotor POA Angle rotor 6,000/4,025 12x15 POA

5 Hettich Rotor and adaptors sold separately Rotofix 32 Centrifuge Low cost, medium sized, bench top centrifuge designed to handle all common laboratory tubes and applications up to 100ml capacity, as well as accessories for performing cyto centrifugation (cyto accessories on request). The Rotofix 32 is fully microprocessor controlled and has a digital display. The motor is a brush-less induction drive unit for smooth and quiet operation. Fully digital and microprocessor controlled Imbalance detection system Maintenance-free induction drive for Metal casing with impact-resistant coating smooth and quiet operation CE marked Large variety of rotor options with overspeed protection s Maximum capacity, ml 4x100 Maximum speed, rpm 6,000 Maximum RCF, x g 4,629 Dimensions (hxwxd), mm 261x368x437 Weight, kg Rotofix 32 bench top centrifuge, without rotor POA Accessories Cat. No. Description Max RPM/RCF Capacity, ml Price Swing out rotor 4,000/2,647 12x POA Metal bucket POA Sealing lid POA Adaptor for 5x7ml blood tubes (12mm diameter) POA Adaptor for 1x25ml Universal tube POA Adaptor for 1x50ml Falcon tube POA Adaptor for 1x15ml Falcon tube POA Swing out rotor* 5,000/3,857 8x50ml Falcons POA Swing out rotor 4,000/2,683 6x50ml Falcons POA Adaptor for 15ml Falcon tube POA Adaptors for other tube sizes available on request. Please contact our Technical Office on * Swing out angle is Rotor sold separately Haematocrit 210 Centrifuge The Haematocrit 210 centrifuge is capable of handling up to 24 x capillary tubes for quick and easy haematocrit determination. The unit is fully microprocessor controlled and features a digital display. It comes equipped with an automatic lid-locking system for guaranteed and secure closure. After completion of the run, simply pressing the appropriate key will release the lock and open the lid. The rotor (not supplied) is segmented with 24 individual chambers, so that if one capillary tube breaks or leaks it will not affect the others. Fully digital and microprocessor controlled Motor overheating protection Imbalance detection system CE marked Automaic lid-locking Maximum capacity 24/20 capillary tubes Maximum RPM 13,000 Maximum RCF 16,060 Dimensions (hxwxd), mm 247x275x330 Electrical requirements V, 50/60Hz Weight, kg Haematocrit 210 centrifuge, without rotor POA Accessories Cat. No. Description Max RPM/RCF Capacity Price Haematocrit rotor with lid* 13,000/16,060 24x capillaries POA * The lid of the rotor is also an evaluation disc. A rotor for 20 capillaries and sealing putty are also available. Please contact our Technical Office on for details. 202

6 Hettich Universal 320 and 320R Centrifuges Medium bench top centrifuges designed to handle all common laboratory tubes. In the low speed range, the Universal 320 and 320R can process standard tubes up to a volume of 100ml, microtitre plates, conical tubes with screw cap, blood collection tubes and cyto accessories. Microlitre tubes can be accelerated to an RCF of 21,382. The refrigerated version (320R) has a temperature range of -20 to +40 C and features a Fast Cool function. The cooling unit is located at the rear of the centrifuge to save valuable lateral bench space. Fully digital and microprocessor controlled Maintenance-free brushless drive for smooth and quiet operation Automatic electronic lid locking with emergency lid-lock release 10 program memory Large variety of easily interchangeable rotors with rotor recognition and overspeed protection Imbalance detection and switch off system Chamber (320R only) and motor overheating protection Metal casing and stainless steel chamber s Model Universal 320 Universal 320R Maximum capacity, ml 4x100 4x100 Maximum speed, rpm 15,000 15,000 Maximum RCF, x g 21,382 21,382 Temperature range -20 to +40 C Dimensions (hxwxd), mm 346x395x x401x695 Weight, kg Cat. No Price POA POA Accessories Cat. No. Description Max RPM/RCF Capacity, ml Price Angle rotor 15,000/16,602 12x POA Angle rotor* 14,000/21,255 30x POA Adaptor for ml tubes (pack of 6) POA Adaptor for ml tubes (pack of 6) POA Angle rotor 9,000/9,418 6x85 POA Adaptor for 15ml Falcon POA Adaptor for 50ml Falcon (only 3 tubes/rotor) POA Conversion kit to allow 6x50ml POA Falcon tubes in rotor Swing out rotor 4,000/2,665 POA Metal bucket POA Sealing lid POA Adaptor for 5x7ml blood tubes (12mm diameter) POA Adaptor for 1x25ml Universal POA Adaptor for 1x50ml Falcon tube POA Adaptor for 1x15ml Falcon tube POA Inserts for other tube sizes available on request Swing out rotor** 5,000/3,857 8x50ml Falcons POA Swing out rotor 4,000/2,701 6x50ml Falcons POA Adaptor for 15ml Falcon tube POA Microtitre rotor with carriers 4,000/2,093 4x microtitre plate POA * For Universal 320R model only ** Swing out angle is 45 Other rotors are available, please contact our Technical Office on for details Rotor sold separately for both centrifuges

7 Hettich shown with optional S control panel Rotanta 460 and Rotanta 460R Centrifuges Large bench top centrifuges designed to process all common laboratory tubes and applications up to 750ml capacity. One rotor will handle all the available bucket options including those designed for ASTM oil test tubes and smaller blood bag systems. This versatile centrifuge is equipped with an automatic lid locking mechanism for safe and easy closure and is exceptionally quiet and smooth, even at full speed. Fully programmable, heated and robotics versions are also available. Fully digital and microprocessor controlled Maintenance-free induction drive for smooth and quiet operation Automatic electronic lid locking One rotor with multiple bucket options High speed rotors up to 24,400g Hygienically sealed microtitre plate buckets s Model Rotanta 460 Rotanta 460R Max. capacity, ml 4x750 4x750 Max. speed, rpm 15,000 15,000 Max. RCF, x g 24,400 24,400 Temperature range -20 C to +40 C Dimensions (hxwxd), mm 453x554x x770x707 Weight, kg Rotanta 460 Bench top centrifuge, without rotor POA Rotanta 460R Refrigerated bench top centrifuge, without rotor POA Accessories Cat. No. Description Max RPM/RCF Capacity Price ml Swing out rotor 4600/4637 4x750 POA Metal bucket (round), 750ml POA Sealing lid POA Insert for 19x15ml tubes POA Insert for 7x25ml Universals POA Insert for 5x50ml Falcon tubes POA Insert for 14x15ml Falcon tubes POA Metal bucket (rectangular) POA Sealing lid POA Insert for 5x50ml Falcon tubes POA Insert for 12x15ml Falcon tubes POA Microtitre bucket POA Sealing lid POA Insert for microtitre plate 4x microtitre/ POA bucket Angle rotor 11,500/18,038 6x94 POA Angle rotor 8,500/11,228 6x250 POA Angle rotor 15,000/24,400 30x1.5 POA Insert for 0.5ml microtube (pk of 6) POA Insert for 0.4ml microtube (pk of 6) POA Cabinets Cabinet with one drawer and castors for Rotanta 460 POA Cabinet with two drawers and castors for Rotanta 460 POA Cabinet with one drawer and castors for Rotanta 460R POA Cabinet with two drawers and castors for Rotanta 460R POA Inserts available for other tube sizes on request. Please contact our Technical Office on Accessories also available for applications with Qiagen plates, Schlenk tubes and blood bags, please enquire for details. Models with S control panel (can store up to 89 programmes and features many additional functions) are also available, please contact our Technical Office on for details. 204

8 Thermo Electron ALC, 4204 and 4214 Microcentrifuges High g force (17,746 max) (4214) Digital display (4214) shown with minute timer with pre-selector Single speed (12,000rpm) model (4204) Pulse button (4214) Fully portable Variable speed model (4214) 4204 Fixed Speed The ideal microcentrifuge for repetitive routine runs at 12,000rpm (13,030 x g). A 15 minute timer with pre-selector ensures absolute repeatability of the parameters Variable Speed The most complete and powerful microcentrifuge in the ALC range. The maximum speed of 14,000rpm gives an outstanding 17,746 x g. Both microcentrifuges are supplied without rotors. They use the minimum of bench space and have a variety of safety devices protecting the user, including an armoured bowl, lid interlock, metallic casing and counterbalanced lid. The A12 rotor is supplied with a specially-designed transparent cap, which optimises the air circulation and ensures maximum quietness and minimum temperature increase. s Model Maximum capacity, ml 20x1.5 20x1.5 Speed range, rpm 12,000 1,000 to 14,000 Maximum RCF, x g 13,030 17,746 Speed display 5 digit LCD Timer, mins hold hold Pulse facility No Yes Maximum temperature rise, ºC Ambient +12 Ambient +12 Maximum noise, db(a) Power, W Dimensions (hxwxd), mm 220x240x x240x360 Weight, kg Cat. No Price POA POA Interchangeable Rotors and Adaptors for 4204 and 4214 Microcentrifuges A12 Rotor 20x1.5/2ml POA Adaptors (20) 1x0.5ml (dia. 6mm) POA A13 Rotor 6x1.5/2ml* POA Adapters (20) 0.2ml PCR POA Adaptors (20) 1x0.5ml (dia. 8mm) POA *Without sealing cap Please note: 4204/4214 are supplied without rotor ALC, 4206 Mini Centrifuge Extremely quiet and compact Highly reliable and safe Economical price Variable speed (max 6,000rpm) 15 minute timer with pre-selector Sealed rotor 4x15ml Maximum capacity 6x15ml Fully portable Indispensable in small centres, emergency laboratories, mobile units, teaching laboratories, the 4206 is easily transportable and is particularly suited to medical or veterinary use. The new hermetically-sealed single buckets ensure biological safety during centrifugation. The transparent cap allows easy visual inspection of the centrifuge tubes. Maximum capacity, ml 4x30 Maximum noise, db(a) 64 Maximum RCF, x g 3,461 Power, W 130 Speed range, rpm 200 6,000 Dimensions (hxwxd), mm 320x270x320 Timer, mins hold Weight, kg shown with Mini centrifuge without rotor POA Rotors Cat. No. Description Capacity, ml Max. Speed, rpm Max. RCF, xg Price F-9 Fixed angle rotor 6x15 6,000 3,461 POA F-10 Fixed angle rotor 4x15 Sealed 6,000 3,461 POA F-11 Fixed angle rotor 4x30 6,000 3,380 POA 205

9 Thermo Electron, ALC, 4218 Mini Centrifuge Extremely quiet and compact Choice of rotors Highly reliable Maximum capacity 6x85ml Economical The 4218 mini centrifuge offers outstanding performance, large capacity and variable speed at an economical price. Portable Weighing only 12.5kg and with compact dimensions (370x350x420mm), the 4218 is ideal for use in small laboratories and for occasional use in the field. Rotors The 4218 can spin a variety of tubes up to a maximum size of 85ml in angle or swing-out rotors. This makes it ideal for small healthcare and veterinary laboratories, emergency laboratories, mobile units or day surgery units. The 4218 requires a rotor for operation, details of which are listed below. Model 4218 Maximum capacity, ml 6x85 Speed range, rpm 4,800 Maximum RCF, x g 2,086 Timer, mins hold Pulse facility No Maximum noise, db(a) 61 Power, W 140 Dimensions (hxwxd), mm 370x350x420 Weight, kg Mini centrifuge without rotor POA Rotors for ALC 4218 Mini centrifuge Cat. No. Description Capacity, ml Max. Speed, rpm Max. RCF, xg Price /1 Swing out rotor set 4x85 3,550 1,817 POA /3 Swing out rotor set 16x15 3,300 1,558 POA Swing out rotor set 6x15 3,700 1,836 POA F-1 Fixed angle rotor 6x85 3,750 1,855 POA F-3 Fixed angle rotor 24x15 3,400 1,680 POA F-4 Fixed angle rotor 12x15 3,700 1,760 POA A-10 Angle rotor 60x0.5 4,800 2,086 POA A-12 Angle rotor 20x2 4,800 2,009 POA Rotor sets include buckets. For full details on rotor/tube combinations please contact our Technical Office on Cencom, Mini Centrifuge Economical price Multiple safety features Variable speed (max 4,800rpm) The Cencom features a built-in rotor for 6x15ml tubes, a timer (0-30mins) and a safety micro-switch in the lid that cuts power when the lid is opened. The outer casing is epoxy coated metal and a transparent lid enables the user to see when the rotor has stopped spinning. Speed is adjustable, with 8 pre-set positions. The Cencom has a small footprint and is easily transportable. Maximum capacity, ml 6x15 Maximum speed, rpm 3,600 Maximum RCF, x g 1,450 Speed range, rpm 630 3,600 with 8 set positions Timer, mins 0 30 Power, W 92 Dimensions (hxdiameter), mm 250x240 Weight, kg Cencon Mini centrifuge supplied with built-in 6x15ml rotor and 6x15ml POA glass centrifuge tubes 206

10 Thermo Electron ALC, PK110 Centrifuge The PK110 is a general purpose centrifuge, ideal for small and medium laboratories. The microprocessor control system has a user friendly interface with soft touch keys for regulation of speed and time. Fast or soft acceleration and deceleration can be selected. Microprocessor control Multiple rotors High performance Quiet (max 57dB(A)) Compact size Brushless induction motor The PK110 sealed swing out rotor set can spin blood tubes and tissue culture tubes up to 4,000rpm. Other accessories such as a 6x50ml conical rotor, 24x15ml fixed angle rotor, 20x1.5ml angle rotor and cytobuckets are available for the PK110 providing maximum versatility with shown with rotor Safety Biological safety of tubes is assured by sealed accessories certified by CAMR (Porton Down). An automatic speed limitation device is also standard on the PK110 centrifuge. Model PK110 Maximum speed Angle, rpm 6,300 Swing out, rpm 4,000 Maximum RCF Angle, x g 3,661 Swing out, x g 2,647 Maximum capacity Angle, ml 6x50 conical Swing out, ml 4x135 Maximum noise, db(a) (max.) 57 Maximum power, W 150 Dimensions (hxwxd), mm 280x370x460 Weight, kg PK110 Centrifuge without rotor POA Rotors for ALC PK110 Centrifuge Swing Out Rotors Cat. No. Description Dimensions, mm Capacity, ml Max Speed, rpm Max RCF, x g Price O-G26/1 Rotor set (1x rotor + 4x buckets) 43x112 4x135 4,000 2,647 POA C513 Sealing caps for O-G26/1 rotor. Set of 4 POA O-G26/2 Rotor 17x100 16x15 4,000 2,575 POA O-G26/3 Rotor including sealing caps 17x100 8x15 4,000 2,575 POA O-G26/4 Rotor 17x100 8x15 4,000 2,575 POA Angle Rotors Cat. No. Description Dimensions, mm Capacity, ml Max Speed, rpm Max RCF, x g Price F-G1 Angle rotor 28x115 6x50 5,000 3,661 POA F-G3 Angle rotor 17x100 24x15 4,000 2,379 POA A-G12 Angle rotor 10x41 20x1.5/2 6,300 3,461 POA For adaptors for all PK110 rotors see page

11 Thermo Electron ALC, PK120 and PK120R Universal Centrifuges ANNITA Microprocessor-control High performance Compact size 5 programme memory Brushless induction motor Choice of 5 rotors Quiet (<62/ <59 db(a)) The PK120 Universal series is a new generation of technically-advanced, stylish and compact low-speed centrifuges. Designed for routine and research applications, it is the ideal workhorse for the busy laboratory. With a maximum capacity of 4x190ml, adaptors can be used to spin loads comprising, for example, 4x50ml or 12x15ml conicals, 20x10ml blood tubes, 48x3ml RIA tubes or up to 6 microplates in sealed carriers, thus showing that the PK120 series offers maximum versatility. Safety Biological safety of tubes and microplates is assured by sealed accessories certified by CAMR (Porton Down) standard IEC Cool Working System (CWS) The PK120 features CWS to ensure maximum performance with the minimum increase in sample temperature. The PK120R features a powerful CFC free refrigeration system over the range -10ºC to 40ºC. s Model PK120 PK120R Maximum speed Angle, rpm 6,000 6,000 Swing out, rpm 4,000 4,000 Maximum RCF Angle, x g 4,507 4,507 Swing out, x g 2,879 2,879 Maximum capacity Angle, ml 6x50 6x50 Swing out, ml 4x190 4x190 Temperature range, ºC Ambient -10 to 40 Maximum noise, db(a) <62 <59 Maximum power, W Dimensions (hxwxd), mm 375x x575 x480 x595 Weight, kg PK120 Universal POA centrifuge without rotor PK120R Universal POA refrigerated centrifuge without rotor For details of rotors for the PK120 and PK120R series centrifuges, please see page 210. For information on adaptors, please see pages 215 to

12 Thermo Electron ALC PK121 and PK121R Multispeed Centrifuges Multi-function ANNITA Microprocessor control Brushless induction motor KLRS (Keyless Rotor System) Cool working system (CWS) Multiple rotors Multi-speed ranges The PK121 series are technically advanced multispeed centrifuges, designed for all requirements in the molecular biology and healthcare fields. They are ideal for high and low speed applications, from microvolumes to large capacities, for research and routine analysis. Simplicity Intuitive user interface with ultrafast programming. 5 programmable memories with lock protection and 5 acceleration/ deceleration profiles make the PK121 series extremely versatile. KLRS (Keyless Rotor System) An exclusive patented, automatic rotor-locking mechanism allows a rapid exchange of rotors in under 5 seconds. Cool Working System (CWS) The PK121 features CWS to ensure that any sample temperature rise is kept to a minimum, whilst the PK121R features a powerful and precise refrigeration system through the range -10ºC to 40ºC. Safety Biological safety of tubes and microplates is assured by sealed accessories certified by CAMR (Porton Down) standard IEC Multiple Rotors Swing out, fixed angle and high-speed angle rotors can all be run in the PK121 series up to a maximum speed of 14,000rpm (18,403 x g). A choice of 8 rotors meets every requirement and offers optimum versatility. For details of rotors for the PK121 series centrifuges, please see page 210. s Model PK121 PK121R Maximum speed Angle, rpm 14,000 14,000 Swing out, rpm 4,000 4,100 Maximum RCF Angle, x g 18,403 18,403 Swing out, x g 2,879 3,025 Maximum capacity Angle, ml 6x50 6x50 Swing out, ml 4x190 4x190 Temperature range, ºC Ambient -10 to 40 Maximum noise, db(a) <62 <59 Maximum power, W Dimensions (hxwxd), mm 375x x575 x480 x595 Weight, kg PK121 Multispeed POA centrifuge without rotor PK121R Multispeed POA centrifuge refrigerated without rotor For details of rotors for the PK121 series centrifuges, please see page 210. For information on adaptors, please see pages 215 to

13 Thermo Electron Swing Out Rotors for PK120 Series and PK121 Series Cat. No. Description Dimensions Capacity Max Speed Max RCF Price mm ml rpm x g O-E24 Rotor set for PK120 56x116 4x190 4,000 2,879 POA (1x rotor +4 x buckets) O-M24 Rotor set for PK121 56x116 4x190 4,000 2,879 POA (1x rotor +4 x buckets) C506 Sealing caps for O-E24 and O-M24 rotors. Set of 4 POA Adaptors for swingout rotors are detailed on page Angle Rotors for PK120 Series and PK121 Series Cat. No. Description Capacity Max Speed Max RCF Price ml rpm x g F-E6 Angle rotor for PK120 30x15 4,000 2,414 POA F-M6 Angle rotor for PK121 30x15 4,000 2,414 POA A-E10 Angle rotor for PK120 6x50 conical 6,000 4,507 POA A-M10 Angle rotor for PK121 6x50 conical 10,000 12,519 POA A-E12 Angle rotor for PK120 20x2.0/1.5 6,000 3,122 POA A-M12 Angle rotor for PK121 20x2.0/1.5 14,000 17,089 POA Adaptors for these rotors are detailed on 216. Microplate Rotors for PK120 Series and PK121 Series Cat. No. Description Microplate Max Speed Max RCF Price Capacity rpm x g O-E17/1 Microplate rotor for 2x3 3,000 1,157 POA PK120 - including buckets O-M17/1 Microplate rotor for 2x3 3,000 1,157 POA PK121- including buckets Sealed carrier (1) for O-E17/1 rotor POA Sealed carrier (1) for O-M17/1 rotor POA Drum Rotor for PK121 Series Cat. No. Description Capacity, ml Max Speed, rpm Max RCF, x g Price A-M6, 6 Place drum rotor - 60x2 11,000 9,738 POA with lid for PK121 Racks for these rotors are detailed on page 216. Angle Rotors for PK121 Series Cat. No. Description Capacity, ml Max Speed, rpm Max RCF, x g Price A-M13 Angle rotor for PK121 10x10 12,000 13,682 POA C509 Spare sealing cap (1) for A-M13 rotor POA A-M21 Angle rotor for PK121 24x2.0/1.5 14,000 18,403 POA C512 Spare sealing cap (1) for A-M21 rotor POA Adaptors for these rotors are detailed on page 216. Please note that all the rotors listed fit both the standard and refrigerated models in each series

14 Thermo Electron ALC, PK130 and PK130R Universal Centrifuges ANNITA Microprocessor control High performance Compact size 5 programme memory Brushless induction motor 6 rotors Quiet (<62/<59dB(A)) The PK130 Universal series is a range of technically advanced, stylish and compact lowspeed centrifuges, designed for routine and research applications. With a maximum capacity of 4x280ml, adaptors can be used to spin loads comprising, for example, 8x50ml or 16x15ml conicals, 48x10ml blood tubes, 76x5ml RIA tubes, or up to 6 microplates in sealed carriers; thus showing that the PK130 series offers maximum versatility. The soft-touch keypad is designed for fast programming of parameters (speed, time, temperature) as well as offering 5 acceleration/ deceleration profiles. Safety Biological safety of tubes and microplates is assured by sealed accessories certified by CAMR (Porton Down) standard IEC Cool Working System (CWS) The PK130 features CWS to ensure maximum performance with minimum increase in sample temperature. The PK130R features a powerful CFC free refrigeration system over the range -10ºC to 40ºC. s Model PK130 PK130R Maximum speed Angle, rpm 6,500 6,500 Swing out, rpm 4,000 4,000 Maximum RCF Angle, x g 5,289 5,289 Swing out, x g 2,933 2,933 Maximum capacity Angle, ml 6x94 6x94 Swing out, ml 4x280 4x280 Temperature range, ºC Ambient -10 to 40 Maximum noise, db(a) <62 <59 Maximum power, W Dimensions 375x x575 (hxwxd), mm x480 x595 Weight, kg PK130 Universal POA centrifuge without rotor PK130R Universal POA refrigerated centrifuge without rotor For details of the rotors available for the PK130 and PK130R, please see page 213. For information on adaptors, please see pages 215 and

15 Thermo Electron ALC, PK131 and PK131R Multispeed Centrifuges Multi function ANNITA Microprocessor control Brushless Induction motor Multiple speed ranges Keyless Rotor System (KLRS) Cool Working System (CWS) Multiple rotors The PK131 series are technically advanced multispeed centrifuges designed for applications in the molecular biology and healthcare fields. They are ideal for high and low speed applications, from microvolumes to large capacities, for research and routine analysis. The PK131 and PK131R both feature an intuitive user interface with ultra-fast programming, 5 programmable memories with lock protection and 5 acceleration/ deceleration profiles making the PK131 series extremely versatile. Keyless Rotor System (KLRS) An exclusive, patented, automatic rotor-locking mechanism allows a rapid exchange of rotors in under 5 seconds. Cool Working System (CWS) The PK131 features CWS to ensure sample temperature rise is kept to a minimum, whilst the PK131R features a powerful and precise refrigeration system over the range -10ºC to 40ºC. Safety Biological safety of tubes and microplates is assured by sealed accessories certified by CAMR (Porton Down) Std IEC Multiple Rotors Swing out, fixed angle and high speed angle rotors can all be run in the PK131 series up to a maximum speed of 14,000rpm (18,403xg). A total of 8 rotors meets every requirement and offers optimum versatility. For details of the rotors for the PK131 and PK131R, see page 213 and for adaptors, see pages 215 to 216. s Model PK131 PK131R Maximum speed Angle, rpm 14,000 14,000 Swing out, rpm 4,000 4,100 Maximum RCF Angle, x g 18,403 18,403 Swing out, x g 2,933 3,082 Maximum capacity Angle, ml 6x94 6x94 Swing out, ml 4x280 4x280 Temperature range, ºC Ambient -10 to 40 Maximum noise, db(a) <63 <60 Maximum power, W Dimensions (hxwxd), mm 375x x575 x480 x595 Weight, kg PK131 Multispeed POA Centrifuge without rotor PK131R Multispeed POA refrigerated Centrifuge without rotor For details of the rotors available for the PK131 and PK131R, please see page

16 Thermo Electron Swing Out Rotors for PK130 Series and PK131 Series Cat. No. Description Dimensions Capacity Max Speed Max RCF Price mm ml rpm x g O-F25 Rotor set for PK130 64x109 4x280 4,000 2,933 POA (1 x rotor + 4 x buckets) O-V25 Rotor set for PK131 64x109 4x280 4,100 3,082 POA (1 x rotor + 4 x buckets) C507 Sealing caps for O-F25 and O-V25. Set of 4 POA Adaptors for these rotors are detailed on page 215. Angle Rotors for PK130 Series and PK131 Series Cat. No. Description Capacity, ml Max Speed, rpm Max RCF, x g Price A-F12 Angle rotor for 20x2.0/1.5 6,500 3,684 POA PK130, including lid A-V12 Angle rotor for PK131 20x2.0/1.5 14,000 17,089 POA F-F6 Angle rotor for PK130 30x15 4,000 2,414 POA F-V6 Angle rotor for PK131 30x15 4,000 2,537 POA Adaptors for these rotors are detailed on page 216. Drum Rotor and racks for PK131 Series Cat. No. Description Capacity, ml Max Speed, rpm Max RCF, x g Price A-V6, 6 Place drum 60x2.0/1.5 11,000 9,738 POA rotor for PK131 Racks for this rotor are detailed on page 216. Angle Rotor for PK131 Series Cat. No. Description Capacity, ml Max Speed, rpm Max RCF, x g Price A-V18 Angle rotor for PK131 6x94 10,000 11,066 POA A-V13 Angle rotor for PK131 10x10ml 12,000 13,682 POA C-510 Spare sealing cap (1) A-V13 rotor POA A-V21 Angle rotor for PK131 24x2/1.5ml 14,000 18,403 POA C-511 Spare sealing cap (1) A-V21 rotor POA Microplate Rotors for PK130 Series and PK131 Series Cat. No. Description Capacity, ml Max Speed, rpm Max RCF, x g Price O-F17/1 Microplate rotor 2x3 microplates 3,000 1,157 POA + buckets for PK Sealed carrier (1) for O-F17/1 rotor POA O-V17/1 Microplate + buckets 2x3 microplates 3,000 1,157 POA rotor for PK Sealed carrier (1) for O-V17/1 rotor POA Angle Rotors for PK130 Series and PK131 Series Cat. No. Description Capacity Max Speed, rpm Max RCF, x g Price A-F10 Angle rotor for PK130 6x50 Conical 6,500 5,289 POA A-V10 Angle rotor for PK131 6x50 Conical 10,000 12,519 POA Adaptors for these rotors are detailed on page 216. Please note that all rotors listed fit both the standard and refrigerated models in each series

17 Thermo Electron Adaptors for O-G26/1 Swing Out Rotor for PK110 Centrifuge Adaptors for 4x135ml Swing Out Rotor Adaptors for 16x15ml Swing Out Rotor Cat. No. Capacity/tubes Dimensions, mm Pack Price x110ml/100ml 40x113 4 POA x100ml 44x100 4 POA x94ml/85/80ml 38x101 4 POA x65/50ml 34x100 4 POA x50ml 28.5x105 4 POA x50ml conical skirted 28x115 4 POA x50ml conical 28x116 4 POA x38.5ml 25.6x POA x30/25ml 24x95 4 POA x30ml 23.5x105 4 POA x25ml Plastic Univ 28x85 4 POA x25ml 24x100 4 POA x16/15ml 18x100 4 POA x15ml 17x105 4 POA x15ml conical 16.5x121 4 POA x13.5/10ml 16x76 4 POA x8ml 12x100 4 POA x5ml 12x75 4 POA x3ml RIA 11x70 4 POA x2/1.5ml 10x41 4 POA x15/10ml Vac 16x100 4 POA x7ml Vac 13x100 4 POA x5ml Vac 13x75 4 POA Adaptors for O-G26/2, O-G26/3, O-G26/4 and F-G3 Rotors for PK110 Centrifuge Adaptors for 6x50ml Fixed Angle Rotor Cat. No. Capacity/tubes Dimensions, mm Pack Price x13.5/10ml 16x76 1 POA x8/7ml Vac 13x100 1 POA x5ml Vac 13x75 1 POA x3ml RIA 11x70 1 POA x2/1.5ml 10x41 1 POA x8/7ml 12x100 1 POA x7/5ml 13x75 1 POA Adaptors for F-G1, Angle Rotor for PK110 Centrifuge Cat. No. Capacity/tubes Dimensions, mm Pack Price x50ml 28.5x105 6 POA x38.5/30ml 25.6x POA x16/15ml 18x100 6 POA x15ml conical 16.5x121 6 POA x10ml 16x82 6 POA x2/1.5ml 10x41 6 POA Adaptors for 20x1.5/2ml Angle Rotor Adaptors for A-G12, Angle Rotor for PK110 Centrifuge Cat. No. Capacity/tubes Pack Price x0.5ml (dia.8mm) 20 POA x0.5ml (dia.6mm) 20 POA x0.25ml PCR 20 POA 214

18 Thermo Electron Adaptors for O-F25 and O-V25 Swing Out Rotors for the PK130 Series and the PK131 Series Centrifuges (pages 211 to 212) Cat. No. Capacity/tubes Dimensions, mm Pack Price Cat. No. Capacity/tubes Dimensions, mm Pack Price x280ml 64x109 4 POA x15ml Urine 17x105 4 POA x250ml 61x133 4 POA x15ml Conical 16.5x121 4 POA x190ml 54.5x POA x15ml Conical* 16.5x121 4 POA x190ml 56.2x POA x13.5/10ml 16x76 4 POA x175ml Conical 60x120 4 POA x8ml 12x100 4 POA x135 ml 43.4x112 4 POA x5ml 12x75 4 POA x110/100ml 40x113 4 POA x3ml 11x70 4 POA x94ml 38x101 4 POA x2.0/1.5ml 10x41 4 POA x65/50ml 34x100 4 POA x15ml 15.5x124 4 POA x50ml 28.5x105 4 POA x15ml Vacutainer* 16x125 4 POA x50ml Conical 28x116 4 POA x7ml Vacutainer 13x100 4 POA x38/30ml 25.6x POA x5ml Vacutainer 13x75 4 POA x30/25ml 24x95 4 POA Amicon Centriprep 4 POA x25ml Corex 24x104 4 POA x30ml Univ. (plastic) 25x85 4 POA x16/15ml 18x100 4 POA x30ml Glass Univ 29x85 4 POA x15/10ml Vacutainer 16x100 4 POA x50ml Conical skirted 28x116 4 POA x15/10ml 16x120 4 POA x50ml Conical* 28x116 4 POA * Without C507 sealing cap Adaptors for O-E24 and O-M24 Swing Out Rotors for the PK120 Series and the PK121 Series Centrifuges (pages 208 to 209) Cat. No. Capacity/tubes Dimensions, mm Pack Price Cat. No. Capacity/tubes Dimensions, mm Pack Price x190ml FB* 54.5x POA x15ml Urine 17x105 4 POA x135ml 43.4x112 4 POA x15ml Conical 16.5x121 4 POA x110/100ml 40x113 4 POA x8ml 12x100 4 POA x94/85/80ml 38x101 4 POA x3ml RIA 12x75 4 POA x65/50ml 34x100 4 POA x2.0/1.5ml 10x41 4 POA x50ml 28.5x105 4 POA x14ml Corning* 15.5x124 4 POA x50ml Conical 28x116 4 POA x15ml Vacutainer* 16x125 4 POA x38/30ml 25.6x POA x10ml Vacutainer 16x100 4 POA x30/25ml 24x95 4 POA x7/5ml Vacutainer 13x75 4 POA x25ml Corex 24x104 4 POA xAmicon Centriprep 4 POA x16ml Corex 18x100 4 POA x30ml Univ. (plastic) 25x85 4 POA x15/10ml 16x76 4 POA x50ml Conical skirted 28x116 4 POA * Without C506 sealing cap 215

19 Thermo Electron Adaptors for F-E6, F-M6, F-F6 and F-V6 Angle Rotors Adaptors for 30x15ml Angle Rotor Cat. No. Capacity/tubes Pack Price x13.5/10ml 1 POA x8/7ml 1 POA x8/7/5ml Conical 1 POA x5ml 1 POA x3ml 1 POA x2.0/1.5ml 1 POA x7/5ml 1 POA Adaptors for A-E10, A-M10, A-F10 and A-V10 Angle Rotors Cat. No. Capacity/tubes Pack Price x50ml* 6 POA x16ml 6 POA x15ml Conical 6 POA x10ml 6 POA x2.0/1.5ml 6 POA * This adaptor is not suitable for A-M10 and A-V10 rotors. Adaptors for 6x50ml Angle Rotor Adaptors for A-E12, A-M12, A-M21, A-F12, A-V12 and A-V21 Microtube Angle Rotors Cat. No. Capacity/tubes Pack* Price x0.5 Ø 8mm 20 POA x0.5 Ø 6mm 20 POA x0.25 PCR 20 POA *Two packs should be ordered for use with the A-M21 and A-V21 rotors as they both hold 24 adaptors. Adaptors for 20x1.5/2ml Angle Rotor Racks for A-M6 and A-V6 Drum Rotors Cat. No. Capacity/tubes Pack Price x2.0/1.5ml 1 POA x0.6/0.8ml 1 POA x0.25/0.5ml 1 POA x0.7ml 1 POA Adaptors for A-V18 Angle Rotor Rack for Rotor Drums Adaptors for AV18 Angle Rotor Cat. No. Capacity Pack Price x65/50ml 6 POA x50ml 6 POA x50ml Conical 6 POA x38/30ml 6 POA x30/25ml 6 POA x16/15ml 6 POA x15ml Urine 6 POA x15ml Conical 6 POA x13.5/10ml 6 POA x8ml 6 POA x8ml 6 POA x5ml 6 POA x3ml 6 POA x2.0/1.5ml 6 POA x0.5ml 6 POA Adaptor for A-M13 and A-V13 Rotors Cat. No. Description Pack Price x2.0/1.5ml 10 POA For rotors see pages 210 and 213 as appropriate. 216

20 Jencons-PLS Mini Centrifuge The Jencons-PLS mini centrifuge is designed for quick spins and microfiltration. It is supplied complete with two interchangeable rotors; one for 6x1.5/2.0ml microtubes and one for 2 strips of 8 PCR tubes (0.2ml). Adaptors are available for 0.5ml, 0.4ml and 0.2ml tubes. Ideal for microfiltration and quick spins Durable lid hinge Compact design, small footprint On/off switch Speed range, rpm 6000 Maximum RCF, x g 2000* Maximum capacity, ml 6x1.5/2.0 tubes (or 0.5/0.4/0.2ml**) 2x 8x0.2 strip tubes Dimensions (wxdxh), mm 150x150x117 Weight, g 450 Power supply 230V, 50Hz * Average max. RCF in the strip tube rotor is 1177x g ** Using accessory adaptors Mini centrifuge supplied with rotor for 6x1.5/2.0ml tubes and rotor for 2 strips POA of 8x0.2ml PCR tubes Accessories Cat. No. Description Pack size Price Adaptors for 0.5/0.6ml tubes 6 POA Adaptors for 0.4/0.25ml tubes 6 POA Adaptors for 0.2ml tubes 6 POA Replacement rotors are available, please contact our Technical Office on for details. Spectrafuge Microcentrifuge The new Spectrafuge features a unique, easy access rotor, multi-flow air cooling system and high performance drive. Two smart knobs are used to control all operating parameters, while speed and time are shown digitally on large displays. A specially designed air cooling system passes ambient air over both the top and bottom of the rotor as well as through the motor chamber. The result is a cool running microcentrifuge that keeps samples close to ambient temperature, even during extended runs at maximum speed. For samples that require below ambient temperature, the Spectrafuge may be used in a cold room. The Spectrafuge is supplied with a 24-position angle rotor for microtubes, which is easily removed for cleaning and autoclaving. The unique design of the rotor allows for easy access to the sample tubes. It accepts 1.5/2.0ml tubes directly and smaller tubes through the use of accessory adaptors. An optional StripSpin adaptor snaps on top of the rotor for spinning 0.2ml tubes and strips. Precise digital control Display rpm or g-force Unique 24 x 1.5/2.0ml easy access rotor Exceptionally quiet and cool running Powerful, brushless drive Optional StripSpin adaptor for 0.2 ml High maximum speed: 13,300rpm/16,300 x g tubes and strips Speed range, rpm 13,300 Maximum RCF, x g 16,300 Maximum capacity, ml 24x1.5/2.0 Timer 30 minutes, continuous or momentary operation Dimensions (wxdxh), mm 235x293x216 Weight. kg 8.2 Power supply 220V, 50/60Hz Spectrafuge, microcentrifuge supplied with rotor for 24x1.5/2.0ml tubes POA Accessories Cat. No. Description Pack size Price StripSpin adaptor for 0.2ml strip tubes 1 POA Adaptors for 0.5/0.6ml tubes 6 POA Adaptors for 0.4/0.25ml tubes 6 POA Adaptors for 0.2ml tubes 6 POA

21 A.Q.S BS400 and BR401 Centrifuges The BS400 and BR401 centrifuges are supplied with or without refrigeration and are ideal for general purpose centrifugation. Designed and manufactured with extensive safety features including locks and automatic shutdown devices, these centrifuges are available with a full set of accessories including swing-out and angle rotors. s Model BS400 BR401 Maximum capacity, ml 4x100ml 4x100ml Maximum speed, rpm 6,000 6,000 Maximum RCF, x g 4,060 4,060 Timer, mins Power, VA Dimensions (wxdxh), mm/weight, kg 405x540x385/35 700x550x385/70 Electrical requirement 220V/50Hz 220V/50Hz BS400 Bench top centrifuge without rotor POA BR401 Refrigerated, bench top centrifuge without rotor POA Both models are supplied with a stainless steel bowl. An enamel bowl can be supplied if preferred. Please contact our Technical Office on Rotors Cat. No. Description Capacity, ml Max. speed, rpm Max. RCF Price B400/3 Four place swing-out rotor, requires 4x POA 4x B400/16 buckets B400/1 Angle rotor, requires 6x B400/5 buckets 6x POA B400/2 Angle rotor, requires 10x B400/6 buckets 10x POA B400/1A Lid for B400/1 and B400/2 angle rotors POA Sealed Bucket for B400/3 Swing-Out Rotor Cat. No. Description Pack Price B400/16 Sealed bucket complete with cap 4 POA B400/35 Spare plastic caps for B400/16 buckets 4 POA B400/36 Spare o ring for B400/16 buckets 4 POA Adaptors for Sealed Buckets B400/16 Cat. No. Description Capacity Pack Price B400/30 Cushion 1x100ml test tube 4 POA B400/31 Adaptor 1x50ml tube or universal 4 POA B400/32 Adaptor 4x15ml tubes 4 POA B400/33 Adaptor 3xcapped 10ml blood tubes 4 POA B400/34 Adaptor 7x12.5mm dia. (max), 64-75mm long 4 POA B400/37 Adaptor 3x5ml blood tubes, capped 4 POA B400/38 Adaptor 4x5ml (narrow) blood tubes, capped 4 POA Buckets, Carriers and Trunnions Cat. No. Description Capacity Pack Price B400/6 Stainless steel bucket including cushion for B400/2 Angle rotor 15ml 1 POA * B400/12 Trunnion for 4x15ml buckets B400/6 4x15ml 4 POA B400/5 Stainless steel bucket including cushion for B400/1 Angle rotor 50ml 1 POA * B400/11 Trunnion for 2x50ml buckets B400/5 2x50ml 4 POA B400/7 Stainless steel bucket including cushion 100ml 1 POA * B400/10 Trunnion for 100ml bucket B400/7 1x100ml 4 POA B400/15 Carrier for use with BS400/3 Swing-out rotor 10x7ml tubes 4 POA * Allows buckets to be used with B400/3 Swing-out rotor Spare Cushions and Motor Brushes Cat. No. Description Pack Price B400/6A Cushion for 15ml bucket B400/6 6 POA B400/5A Cushion for 50ml bucket B400/5 and B400/31 adaptor 6 POA B400/5B Hemispherical cushion for glass universal container in bucket B400/5 6 POA B400/7A Cushion for 100ml bucket B400/7 6 POA B400/15A Cushion for B400/15 carrier 12 POA B400/80 100ml glass tube 1 POA /003 Spare brushes for motor 2 POA 218

22 Nickel Electro Clifton, NE000 Series, Microcentrifuge A compact personal microcentrifuge designed for microtubes or PCR strips for simple and quick spins. It has a small footprint and the rotor can be easily removed for cleaning or fitting alternative rotors. It is supplied with a rotor which accepts 0.5 and or 1.5ml microtubes. Lid interlock whilst rotor is energised Suitable for micro filter cell separations and Quiet and smooth operation HPLC samples Speed control variable up to 8,000rpm Durable chassis Dynamic braking Non slip feet for stability and safety Ideal for quick spin downs 3 year warranty Easy to use Operation Rotor activated on speed selection Speed, rpm 2,000 8,000 Rotor type Angle head Tube capacity 0.5 and 1.5ml microtubes Max number tubes 6 each size Max RCF, g 4,000 Overall dimensions (wxdxh), mm Lid closed 175x220x140 Lid open 175x220x320 Voltage 230V, 50Hz Weight, kg NE 000G/I Microcentrifuge supplied with fixed angle rotor POA Optional Rotors Cat. No. Model Max speed rpm Tube capacity Max number of tubes Price R ml 12 POA R PCR strip 2 strips (of 8) POA open Clifton, NE010 Series, Targa Centrifuge The Targa centrifuge is designed specifically as a low cost, low energy product. It is constructed with a durable steel body for safety and supplied with a four-place swing out rotor complete with removable buckets. Maintaining finger pressure on the push Releasing finger pressure de-energises button operates the centrifuge and locks the rotor the lid in position Rotor energised warning indicator lamp The rotor can only be activated when the lid Easy wipe clean bowl with no crevices is correctly closed and locked Rotor can be removed for easy cleaning A viewing window in the lid enables the 3 year warranty rotor motion to be observed Operation Rotor activated push button Max speed, rpm 2,800 Rotor type Swing out* Tube capacity, ml 15 Max number tubes 4 Tube dims ø17x100mm ø13x75mm with adaptors ø10x75mm with adaptors Max radius, mm 130 Max RCF, g 1,100 Overall dimensions (wxdxh), mm Lid closed 361x400x320 Lid open 361x415x720 Rating, W 100 Voltage 230V, 50Hz Weight, kg 8 * No alternative rotors available open NE 010G Targa Centrifuge supplied with swing out rotor and adaptors POA 219

23 Nickel Electro Clifton, NE010 Series, Interlock Centrifuges This range consists of two models constructed with a steel body and supplied with a four-place swing out rotor complete with removable aluminium buckets. Both models feature safety interlock, which prevents the lid being opened until the rotor is at rest. Supplied with a 3 year warranty open open An additional safety feature ensures that in the event of power failure the lid remains in the locked position. The centrifuge can only be operated if the lid is correctly closed and locked in position. Control panel has a series of indicator lamps - for rotor on, lid locked and rotor run down Model NE 010G/I Maintaining finger pressure on the push button operates the centrifuge and locks the lid in position Releasing finger pressure de-energises the rotor, but the lid remains locked until the rotor is at rest Model NE 010GT/I Timer allows variable rotor operation up to 30 mins - push button activates timer - lid remains locked until rotor is at rest s Model NE 010G/I NE 010GT/I Operation Rotor activated push button Timer Max speed, rpm 2,800 2,800 Rotor type Swing out or angle head* Swing out or angle head* Tube capacity, ml max 15 max 15 Max number tubes 4 4 Tube dims ø17x105mm/ø13x95mm with adaptors/ ø10x95mm with adaptors (both models) Max radius, mm Max RCF, g 1,200 1,200 Timer 0 30 mins Overall dimensions (wxdxh), mm Lid closed 361x400x320/ Lid open 361x415x720 (both models) Rating, W Voltage 230V, 50Hz 230V, 50Hz Weight, kg NE 010G/I Centrifuge supplied with swing out rotor and adaptors POA NE 010GT/I Centrifuge with timer, supplied with swing out rotor and adaptors POA * See page 221 for alternative rotors and adaptors. Clifton, NE020 Series, Interlock, Analogue Centrifuge This centrifuge is ideal for clinical applications and is supplied with a fixed angle head rotor for test tubes. Durable design with safety lid interlock Variable rotor speed and timer Selected rotor speed constantly monitored and maintained Electronic timer Non slip feet Easy to use - set time and speed - push button to start or stop Warning indicators for rotation and lid unlocked 3 year warranty Operation Timer Speed, rpm 500 3,500rpm Rotor type Angle head* Tube capacity 15ml Max number tubes 6 Tube dims ø17x120mm Max radius, mm 120 Max RCF, g 1300 Overall dimensions (wxdxh), mm Lid closed 340x290x225/ Lid open 361x435x515 Rating 100W Voltage 230V, 50Hz Weight, kg 13 * No alternative rotors available NE 020GT/I Centrifuge supplied with fixed angle rotor POA 220

24 Nickel Electro Clifton, NE030 Series, Interlock, Digital Centrifuge A bench top centrifuge with wipe clean control panel, touch pad controls and digital display, broad speed range and in-built safety monitoring system. Featuring active lid cooling making it suitable for biological separations and samples which can suffer heat damage. The active cooling draws fresh air in from outside and expels warm air from the rotor assembly through the back of the lid. Supplied without a rotor. Four accessory rotors are available for a variety of tubes from micro to conical tubes. Safety features include automatic rotor imbalance alarm and rotor recognition limiting the maximum permissible speed. Easy to use with digital display of speed, acceleration, braking and time settings. Easy to read digital display Wipe clean chemical resistant control panel Brake and acceleration control Active cooling system to reduce thermal shock Touch button controls Powder painted body providing a durable finish Speed and time setting 3 year warranty Audible alarm at end of timed period Operation Timer Speed, rpm Rotor type Angle head (not supplied)* Timer, mins 6 60mins Braking/acceleration 1 9 levels Overall, dims (wxdxh), mm Lid closed 275x330x240/Lid open 275x330x670 Rating 400W Voltage 230V, 50-60Hz Weight, kg 14 * Accessory rotors - see below NE 030GT/I Centrifuge supplied without a rotor POA Accessories Rotors and Adaptors for NE 030 Centrifuge Cat. No. Description Max RPM/RCF Capacity, ml Tube dims, mm Max radius, mm Price R030-1 Angle rotor, /2800 8x15/12 ø17x POA T030-5 Adaptors for R030-1 (Pack 8) 5000/2800 8x10 ø17x POA T030-1 Adaptor for R030-1 (Pack 8) 5000/2740 8x7 ø12x POA T030-2 Adaptor for R030-1 (Pack 8) 5000/2375 8x5 ø12x75 85 POA R030-2 Angle rotor, /2800 6x15 or ø17x POA 5000/ x12 ø17x T030-6 Adaptors for R030-2 (Pack 12) 5000/ x10 ø17x POA T030-3 Adaptor for R030-2 (Pack 12) 5000/ x7 ø12x POA T030-4 Adaptor for R030-2 (Pack 12) 5000/ x5 ø12x75 85 POA R030-3 High speed angle rotor, / x0.25 and ø6x30 65 POA 13000/ x1.5 ø11x R030-4 Haematocrit rotor 13000/ glass tubes ø1.2x75 92 POA Rotors for NE 010G/I and NE 010GT/I Centrifuges Cat. No. Description Max RPM/RCF Capacity, ml Tube dims, mm Max radius, mm Price R010-1 Angle rotor 2800/1000 4x15-12 or ø17x POA 2800/1000 4x7* ø13x T010-1 Adaptor for R010-1 (Pack 4) 2800/880 4x5** or ø13x POA 2800/880 4x3** ø10x R010-2 Angle rotor, /1100 8x15-12 or ø17x POA 2800/1100 8x7* ø13x T010-1 Adaptor for R010-1 (Pack 4) 2800/1000 8x5** or ø12x POA 2800/1000 8x3** ø10x R010-3 Swing out rotor 2800/1200 2x50 ø30x POA * Using adaptors supplied as standard with the NE 010G/I and NE 010GT/I centrifuges. ** Using adaptors supplied as standard with the centrifuges and optional T010-1 adaptors. 221