TECHNICAL SPECIFICATION FOR RATE CONTRACT OF INSULATING MATS
|
|
- Melanie Kelly
- 6 years ago
- Views:
Transcription
1 TECHNICAL SPECIFICATION FOR INSULATING MAT 1.0 SCOPE 1.1 The scope includes design, manufacturing, inspection, testing, packing and delivery to site of protective mats for placing in front of HT (11kV, 6.6kV, 3.3kV)/ LT (415V, 220V DC) Switchboards. 2.0 BILL OF QUANTITIES 2.1 Quantity requirements shall be project specific and shall be furnished after finalization of rate contract. 3.0 TECHNICAL REQUIREMENTS 3.1 The physical, chemical, mechanical and electrical properties of the insulating mats shall be as per IS: with latest amendments. 3.2 Class and designation of the mats shall be as follows: Class A: Upto 3.3kV rms and 220V DC Class B: Above 3.3kV rms and upto 11kV rms 3.3 The mats should have been type tested in accordance with the applicable standards. 3.4 Insulating mats to be supplied shall be BIS approved and the same shall be embossed/ engraved on insulating mats. 3.5 Insulating mat to be supplied shall be type tested at CPRI. 3.6 Mats shall be supplied as per sizes specified in the price schedule. 3.7 Technical requirements for insulating mats shall be as indicated in Datasheet-A. 4.0 SPECIFIC QUALITY ASSURANCE REQUIREMENTS 4.1 Type test certificates, as per requirement, carried out at independent laboratory shall be submitted for Purchaser s scrutiny. 4.2 All type tests shall be conducted at CPRI with BHEL approval and the cost of testing shall be to bidder s account. If the sample fails, all supplied mats shall be rejected and contractor shall have to supply new lot again and testing will continue for the new lot till the mats are acceptable to the customer. BHEL reserves the right to witness the testing for which due notice shall be given by the vendor. 4.3 Inspection for routine and sampling tests as per IS: shall be carried out at vendor s works and all test facilities/ equipment shall be available for the same at
2 vendor s work. However, if testing is required to be carried out in independent laboratories other premises due to unavailability/ lack of required facilities at vendor s works, the cost of the same shall be to bidder s account. No additional cost for the tests shall be borne by BHEL. 4.4 All type, routine and sampling tests shall be as per IS: with latest amendment. 4.5 Dispatch of materials shall be permitted only after acceptance of type test certificates, and inspection and testing of materials. 4.6 The bidder shall submit the Standard Quality Plan (SQP) duly signed as attached with the specification. 4.7 Cost of insulating mats consumed for testing shall be to bidder s account. 4.8 Packing and marking shall be as per IS: with latest amendment. 5.0 COMPLIANCE TO SPECIFICATION Bidder shall confirm total compliance to the specification without any deviations from the technical requirements stipulated. As a mark of technical conformance, all sheets of the specification shall be furnished by each bidder with the signature and company seal affixed thereon. In case of any deviations, the same shall be carried out in the deviation schedule only. 6.0 TECHNICAL AND QUALITY DOCUMENTATION TO BE SUBMITTED 6.1 By Bidders along with the technical bid: Signed and stamped copy of the specification (in two nos.). Type Test Certificates from independent labs only. Technical catalogues/ literature for the mats. Standard Quality Plan duly stamped. 6.2 After finalization of the rate contract : Copies of test certificates for testing done under the contract. Datasheet B. 7.0 Wherever required, soft copy of all approved technical/ quality documentation shall be submitted as specified without any additional commercial implication.
3 Soft copies may be required both in native file format (e.g. MS Word/ MS Excel) as well as PDF files.
4 DATA A Type of Insulating Mat Sl. No. Technical Parameters A B 1 Applicable standard IS:15652 with latest IS:15652 with latest amendments amendments 2 Dimensions Sizes as specified in price Sizes as specified in schedule price schedule 3 Tolerances +/-20mm +/-20mm 4 Thickness 2.0mm +/-10% 2.5mm+/-10% 5 Colour As specified by BHEL As specified by BHEL 6 Workmanship and finish 7 Physical Properties a)tensile strength -10 to deg C (N/mm 2 ) b) Elongation at break (%) 7.2 Dielectric Properties 8 i) Insulation resistance with water (Mega ohms) ii) Leakage current at maximum use voltage (micro/ mill Amp) iii) AC Dielectric strength (ac KV rms) iv) ac Proof Voltage (ac rms KV) Ageing properties as per IS (/No) Thermal Properties as per IS (/No) i) Flame retardant properties as per IS (/No) Mat shall be free on both surfaces from harmful physical irregularities. 15(min) 250(min) 10,0000 megaohms with 5000 V megger and 10,00000 megaohms with 500 V megger Mat shall be free on both surfaces from harmful physical irregularities. 15(min) 250(min) 10,0000 megaohms with 5000 V megger and 10,00000 megaohms with 500 V megger 10 ma (max) 10 ma (max) 30kV(min) 10kV(min) 45kV(min) 22kV(min)
5 ii) Low temperature resistance propertied as per IS (/No) 9 Acid/ Alkali and oil resistance properties as per IS (/No) 10 Type testing to be conducted as per IS: with latest amendments at independent laboratory (at CPRI). (at CPRI).
TECHNICAL SPECIFICATION FOR L. T. XLPE POWER CABLE
TECHNICAL SPECIFICATION FOR L. T. XLPE POWER CABLE SEAL & SIGNATURE OF THE TENDERER PAGE 1 OF 14 TECHNICAL SPECIFICATION FOR LT XLPE POWER CABLES (SPECIFICATION NO.MM/I/LTXLPE/2006) 1. SCOPE: The specification
More informationTECHNICAL SPECIFICATION
TECHNICAL SPECIFICATION OF ELECTRICAL MATERIALS DEVKON KIT AND HAND GLOVES GROUP F Tender Notice No. NESCO Utility / O&M Materials/58 / 8267, dtd.17.7.15 1 Group-F Sl no. Material Description Unit Quantity
More informationP.V.C. INSULATED UNARMOURED COPPER CABLES
083 : 2007 CEB SPECIFICATION P.V.C. INSULATED UNARMOURED COPPER CABLES CEYLON ELECTRICITY BOARD SRI LANKA Specification for P.V.C. INSULATED UNARMOURED COPPER CABLES CEB Specification 083 : 2007 CEYLON
More informationP.V.C. INSULATED ALUMINIUM SERVICE MAIN WIRE-FINISHED PRODUCT
CEB SPECIFICATION 005-1: 2012 P.V.C. INSULATED ALUMINIUM SERVICE MAIN WIRE-FINISHED PRODUCT CEYLON ELECTRICITY BOARD SRI LANKA Telephone: +94 11 232 0953 Fax: +94 11 232 3935 CONTENTS PAGE 1. Scope 03
More informationNUCLEAR POWER CORPORATION OF INDIA LTD. (A GOVT. OF INDIA ENTERPRISE) SPECIFICATION NO.PB-E-542/REV. No.0
REVISION NO. 0 NUCLEAR POWER CORPORATION OF INDIA LTD. (A GOVT. OF INDIA ENTERPRISE) SPECIFICATION NO.PB-E-542/REV. No.0 PAGE NO. 1 OF 24 DATE OF ISSUE (MONTH/YEAR) TOTAL NO. OF PAGES (Including cover
More informationTECHNICAL SPECIFICATIONS & SPECIAL CONDITIONS OF CONTRACT FOR ELECTRICAL WORKS CHAPTER 1 SPECIAL CONDITIONS OF CONTRACT
TECHNICAL SPECIFICATIONS & SPECIAL CONDITIONS OF CONTRACT FOR ELECTRICAL WORKS CHAPTER 1 SPECIAL CONDITIONS OF CONTRACT 1.1 General 1.1.1 These Special Conditions of Contract supplement the General Instructions.
More informationSCHEDULE ' A ' TECHNICAL SPECIFICATION FOR L.T.PVC POWER AND CONTROL CABLES FOR DISTRIBUTION NETWORK IN MAHARASHTRA
SCHEDULE ' A ' TECHNICAL SPECIFICATION FOR L.T.PVC POWER AND CONTROL CABLES FOR DISTRIBUTION NETWORK IN MAHARASHTRA (SPECIFICATION NO.MM/I/LTPVC & CONTROL/2006) MAHARASHTRA STATE ELECTRICITY DISTRIBUTION
More informationSPECIFICATION FOR HT PIN (11KV & 22KV) AND 11KV DISC. INSULATORS: -
SPECIFICATION FOR HT PIN (11KV & 22KV) AND 11KV DISC. INSULATORS: - 1. SCOPE: - This specification covers 11KV Disc Type & 11KV/ 22KV Pin Type Insulators for 11/22KV H.T. over head power lines. 2. APPLICABLE
More information094: 2000 CEB STANDARD. MEDIUM VOLTAGE PIN INSULATORS & HARDWARE (12kV & 36 kv) CEYLON ELECTRICITY BOARD SRI LANKA
094: 2000 CEB STANDARD MEDIUM VOLTAGE PIN INSULATORS & HARDWARE (12kV & 36 kv) CEYLON ELECTRICITY BOARD SRI LANKA Specification for MEDIUM VOLTAGE PIN INSULATORS & HARDWARE (12kV & 36 kv) CEB Standard
More informationACCELARATED POWER DEVELOPMENT AND REFORM PROGRAMME. Technical Specification (T.S)
ACCELARATED POWER DEVELOPMENT AND REFORM PROGRAMME SECTION - V Technical Specification (T.S) 37 (SCHEDULE I) TECHNICAL SPECIFICATION FOR SUPPLY OF AB CABLE 38 1. SCOPE: TECHNICAL SPECIFICATION This specification
More informationSTANDARD TECHNICAL SPECIFICATION FOR FLOW ORIFICE ASSEMBLY with ACCESSORIES
STANDARD TECHNICAL SPECIFICATION FOR FLOW ORIFICE ASSEMBLY with ACCESSORIES VOLUME - IIB SECTIONS-C & D SPECIFICATION No: PE-TS-XXX-145-I105A BHARAT HEAVY ELECTRICALS LIMITED POWER SECTOR PROJECT ENGINEERING
More informationSTANDARD TECHNICAL SPECIFICATION FOR ELECTROMAGNETIC FLOW METER with ACCESSORIES
STANDARD TECHNICAL SPECIFICATION FOR ELECTROMAGNETIC FLOW METER with ACCESSORIES VOLUME - IIB SECTIONS-C & D SPECIFICATION No: PE-TS-XXX-145-I027 BHARAT HEAVY ELECTRICALS LIMITED POWER SECTOR PROJECT ENGINEERING
More informationSTANDARD TECHNICAL SPECIFICATION FOR FLOW NOZZLE ASSEMBLY with ACCESSORIES
STANDARD TECHNICAL SPECIFICATION FOR FLOW NOZZLE ASSEMBLY with ACCESSORIES VOLUME - IIB SECTIONS-C & D SPECIFICATION No: PE-TS-XXX-145-I105B BHARAT HEAVY ELECTRICALS LIMITED POWER SECTOR PROJECT ENGINEERING
More informationTECHNICAL SPECIFICATION FOR CLAMPS & CONNECTORS FOR 66/132/220/400 KV SUB-STATION
GUJARAT ENERGY TRANSMISSION CORPORATION LTD. Sardar Patel Vidyut Bhavan, Race Course, Vadodara: 390 007 TECHNICAL SPECIFICATION FOR CLAMPS & CONNECTORS FOR 66/132/220/400 KV SUB-STATION GETCO/E/TS-C&C
More information11-SDMS-01 REV. 02 SPECIFICATIONS FOR LOW VOLTAGE POWER AND CONTROL CABLES
11-SDMS-01 REV. 02 SPECIFICATIONS FOR LOW VOLTAGE POWER AND CONTROL CABLES This specification is property of SEC and subject to change or modification without any notice CONTENTS Clause Page 1.0 SCOPE
More informationTECHNICAL SPECIFICATION FOR LT PIN/SHACKLE INSULATORS
TECHNICAL SPECIFICATION FOR LT PIN/SHACKLE INSULATORS SEAL & SIGNATURE OF THE TENDERER PAGE 1 OF 11 TECHNICAL SPECIFICATION FOR LT PIN/SHACKLE INSULATORS 1.0 Scope : The specification covers the manufacture,
More informationTECHNICAL SPECIFICATION FOR MS BEAMS 116X100 11MTR LONG FOR SUB-STATIONS
GUJARAT ENERGY TRANSMISSION CORPORATION LTD. Sardar Patel Vidyut Bhavan, Race Course, Vadodara: 390 007 TECHNICAL SPECIFICATION FOR MS BEAMS 116X100 11MTR LONG FOR SUB-STATIONS GETCO/E/TS-MS024/R0DT01-04-2008
More informationTECHNICAL SPECIFICATIONS FOR CROSS LINKED POLYETHYLENE INSULATED 3 CORE llkv CABLES
TECHNICAL SPECIFICATIONS FOR CROSS LINKED POLYETHYLENE INSULATED 3 CORE llkv CABLES 1.00.00 SCOPE: 1.01.00 The scope of this package, covers the design, manufacture, stage inspection at works, inspection
More informationSPECIFICATION FOR ALL ALUMINIUM ALLOY STRANDED CONDUCTOR
003: 2008 CEB SPECIFICATION SPECIFICATION FOR ALL ALUMINIUM ALLOY STRANDED CONDUCTOR CEYLON ELECTRICITY BOARD SRI LANKA Specification for Specification For All Aluminium Alloy Stranded Conductor CEB Specification
More informationTECHNICAL SPECIFICATION FOR CONDUCTORS
TECHNICAL SPECIFICATION FOR CONDUCTORS SEAL & SIGNATURE OF THE TENDERER PAGE 1 OF 9 TECHNICAL SPECIFICATION FOR CONDUCTORS SPECIFYING TECHNICAL PARAMETERS OF THE CONDUCTOR SPECIFICATION NO. RE/ II/ ACSR
More informationSpecifications of Impeller forgings. Quantity: 2 No s. (Please find the attachment for material specification HY19391)
Specifications of Impeller forgings Material Specification: HY19391 Grade: V X12 Cr13 G Dimensions: OD 830 X ID 370 X Thickness 120 (all are in mm) Quantity: 2 No s. (Please find the attachment for material
More informationTECHNICAL SPECIFICATIONS LAYING OF DIFFERENT WIRES & CABLES MOUNTED ON POLES FOR BRPL/BYPL
TECHNICAL SPECIFICATIONS OF LAYING OF DIFFERENT WIRES & CABLES MOUNTED ON POLES FOR BRPL/BYPL SPECIFICATION NO- GN101-03-SP-13-02 INDEX 1.0 SCOPE 4 2.0 DESIGN..4 3.0 REQUIREMENT...5 4.0 DESIGN ( DISTRIBUTION
More informationTURKISH ELECTRICITY DISTRIBUTION CO. TECHNICAL SPECIFICATION FOR POST (SUPPORT) INSULATORS FOR MEDIUM VOLTAGE SYSTEMS
TURKISH ELECTRICITY DISTRIBUTION CO. TECHNICAL SPECIFICATION FOR POST (SUPPORT) INSULATORS FOR MEDIUM VOLTAGE SYSTEMS CONSULTANT: ELTEM-TEK ELECTRICAL INSTALLATIONS ENGINEERING SERVICES AND TRADE CO. JUNE,
More informationMESP TECHNICAL SPECIFICATION FOR ELECTRIC CABLE 70mm 2 FLEXIBLE TINNED COPPER CONDUCTOR 3.3kV EPR INSULATED WITHOUT METALLIC SCREEN
Engineering Specification Electrical Networks MESP 030000-04 TECHNICAL SPECIFICATION FOR ELECTRIC CABLE 70mm 2 FLEXIBLE TINNED COPPER CONDUCTOR 3.3kV EPR INSULATED WITHOUT METALLIC SCREEN Version: 1 Issued:
More informationDATA SHEET. EM1000 Fine Ribbed Electrical Safety Matting, rated to IEC61111:2009 Class 0
DATA SHEET EM1000 Fine Ribbed Electrical Safety Matting, rated to IEC61111:2009 Class 0 Unit 21 Priory Industrial Park Airspeed Road Christchurch Dorset BH23 4HD Tel: 01425 278011 Fax: 01425 278012 www.deltarubber.co.uk
More informationOki (High Pressure Boiler Plant)
Bharat Heavy Electricals Limited 1717TC.1 Oki (High Pressure Boiler Plant) Tiruchirappalli 620014, TAMIL NADU, INDIA An ISO 9001 MATERIALS MANAGEMENT / CAPITAL EQUIPMENT Company ENQUIRY Phone: +91 431
More informationSECTION 07 TECHNICAL SPECIFICATIONS 11KV OUTDOOR TYPE SINGLE PHASE METAL OXIDE (ZNO) GAPLESS LIGHTNING ARRESTER (LA)
SECTION 07 TECHNICAL SPECIFICATIONS OF 11KV OUTDOOR TYPE SINGLE PHASE METAL OXIDE (ZNO) GAPLESS LIGHTNING ARRESTER (LA) 7.0 TECHNICAL SPECIFICATIONS OF 11KV OUTDOOR TYPE SINGLE PHASE METAL OXIDE (ZNO)
More information9KV/18KV METAL OXIDE LIGHTNING ARRESTORS WITHOUT GAPS WITH STANDARD NOMINAL DISCHARGE CURRENT 5KA
9KV/18KV METAL OXIDE LIGHTNING ARRESTORS WITHOUT GAPS WITH STANDARD NOMINAL DISCHARGE CURRENT 5KA Technical specification for 9KV/18KV 5KA Metal oxide Lightning Arrestors without Gap. ----------------------------------------------------------------------------------------------------------------
More informationTECHNICAL SPECIFICATIONS
SPEC.NO. MSEDCL/ DIST:MSC-III/SPRING LOADED CONNECTOR BOX/05/10/R0/ 200510 TECHNICAL SPECIFICATIONS FOR TAMPER PROOF SERVICE CONNECTION BOX FOR L.T. LINES / CONSUMER MAINS (20.05.2010) Page 1 of 14 Clause
More informationANNEXURE - ' D ' TECHNICAL SPECIFICATION FOR INSULATOR PINS ( PINS FOR 11,22 AND 33 kv INSULATORS )
ANNEXURE - ' D ' TECHNICAL SPECIFICATION FOR INSULATOR PINS ( PINS FOR 11,22 AND 33 kv INSULATORS ) SPECIFICATION NO:DIST/MM/I/G.I. PINS -2006) INDEX ------------------------------------------------------------------------------------------------------------
More informationTECHNICAL SPECIFICATION FOR CLAMPS & CONNECTORS FOR 400/220 KV SUB-STATION
GUJARAT ENERGY TRANSMISSION CORPORATION LTD. Sardar Patel Vidyut Bhavan, Race Course, Vadodara: 390 007 TECHNICAL SPECIFICATION FOR CLAMPS & CONNECTORS FOR 400/220 KV SUB-STATION GETCO/E/TS C&C057/R0 DT.
More informationNOTICE OF ADVERTISEMENT FOR BIDS. Furnishing and Delivery of 5kV Switchgear for Panora Municipal Electrical Utility Panora, Iowa, 50216
NOTICE OF ADVERTISEMENT FOR BIDS Furnishing and Delivery of 5kV Switchgear for Panora Municipal Electrical Utility Panora, Iowa, 50216 Notice is hereby given that proposals for furnishing and delivery
More informationNot Applicable DD/MM/YY Completed Forms to be submitted by 30/08/2013 : Hrs IST. Date of Opening for Technical Bids 30/08/2013 : 14.
DETAIL INFORMATION Contact Person and Address M.NALLATHAMBI SENIOR MANAGER / CCDP PURCHASE DEPARTMENT/R&D and CR UNIT HPBP BHEL, TIRUCHY, INDIA PIN : 620 014 Email mnthambi@bheltry.co.in Telephone 0091
More informationBHARAT HEAVY ELECTRICALS LIMITED CORPORATE ( HR-GAX ) BHEL House, SIRI FORT NEW DELHI TENDER DOCUMENTS
BHARAT HEAVY ELECTRICALS LIMITED CORPORATE ( HR-GAX ) BHEL House, SIRI FORT NEW DELHI - 110049 TENDER DOCUMENTS FOR SUPPLY OF NEW YEAR GIFT FOR BHEL EMPLOYEES (Items category:- Kitchen appliances / Crockery
More informationTECHNICAL SPECIFICATIONS for 100Ci Ir-192 source projector(exposure device /Camera )
S-104-Q-ISTOPE CAMERA-PtB TECHNICAL SPECIFICATIONS for 100Ci Ir-192 source projector(exposure device /Camera ) S. No. PARTICULARS BHEL SPECIFICATIONS 1.0 Area of Application For Gamma Radiography of materials
More informationTECHNICAL SPECIFICATION OF MS TOR BARS FOR TRANSMISSION LINES
GUJARAT ENERGY TRANSMISSION CORPORATION LTD. Sardar Patel Vidyut Bhavan, Race Course, Vadodara: 390 007 TECHNICAL SPECIFICATION OF MS TOR BARS FOR TRANSMISSION LINES GETCO/E/TS-MS024/R2 DT08-02-2012 TECHNICAL
More informationDr B R AMBEDKAR NATIONAL INSTITUTE OF TECHNOLOGY G T Road By Pass, Jalandhar , Punjab (India) Tel: website
Ref. No: NITJ/Pur/CH/103/17/ Date: NOTICE INVITING QUOTATION Sealed quotations are invited on behalf of Director, NIT, Jalandhar for the Supply of Various Equipment required for Chemical Technology & Energy
More informationTECHNICAL SPECIFICATION FOR CLAMPS & CONNECTORS FOR 66/132 KV SUB-STATION
GUJARAT ENERGY TRANSMISSION CORPORATION LTD. Sardar Patel Vidyut Bhavan, Race Course, Vadodara: 390 007 TECHNICAL SPECIFICATION FOR CLAMPS & CONNECTORS FOR 66/132 KV SUB-STATION GETCO/E/TS C&C057/R0 DT.
More informationDesign, Fabrication, Supply, Installation & Commissioning of Scissor Lift for ITMT Building at. CREST, Hosakote. Indian Institute of Astrophysics
Design, Fabrication, Supply, Installation & Commissioning of Scissor Lift for ITMT Building at CREST, Hosakote Indian Institute of Astrophysics Bangalore October 2017 1. Introduction The required scissor
More informationMESP TECHNICAL SPECIFICATION FOR ELECTRIC CABLE 400mm 2 ALUMINIUM CONDUCTOR 1.9kV XLPE INSULATED WITH METALLIC SCREEN
Engineering Specification Electrical Networks TECHNICAL SPECIFICATION FOR ELECTRIC CABLE 400mm 2 ALUMINIUM CONDUCTOR 1.9kV XLPE INSULATED Version: 1 Issued: March 2014 Owner: Electrical Networks Asset
More informationName and Contact Details of the Person for Queries in the Tender. Enquiry No. Last Date of Submission of the Tender Tender Opening Date
Important details of the Tender Name and Contact Details of the Person for Queries in the Tender Enquiry No. Last Date of Submission of the Tender Tender Opening Date (1) 0. P. Gupta Sr. Manager/MM, BHEL
More informationM16 M20 M25 M207 M51 M100 M200
Metal Film Fixed Resistor Specifications Per IEC 60115-1 MIL-R-10509 d L H D Features Conformal multi-layer coating Color code per MIL & EIA standards Special tin-plated electrolytic copper lead wire Products
More informationREQUEST FOR PROPOSAL
BPACKAGE NO. K.G.B.V. TEACHER'S GUIDELINE ( GUJARATI)/ 2014-15 Gujarat Council of Elementary Education Sarva Shiksha Abhiyan REQUEST FOR PROPOSAL REGARDING PRINTING OF "K.G.B.V. TEACHER'S GUIDELINE ( GUJARATI)
More informationRESIN FILLING TYPE JOINTING KITS FOR LOW VOLTAGE UNDERGROUND CABLES
CEB STANDARD 030-1 : 1996 Specification for RESIN FILLING TYPE JOINTING KITS FOR LOW VOLTAGE UNDERGROUND CABLES CEYLON ELECTRICITY BOARD SRI LANKA Specification for RESIN FILLING TYPE JOINTING KITS FOR
More informationRef : Global Tender Notice No : DBJ/21/ April 19, 2011.
Ref : Global Tender Notice No : DBJ/21/11-12. April 19, 2011. M/s. Dear Sir/s, The Director, Indian Institute of Astrophysics, Bangalore, invites Sealed Tenders for the Import of Cisco 4500 Series Chassis
More informationCITY OF THREE RIVERS, MICHIGAN SPECIFICATIONS FOR DRINKING WATER CHEMICAL BIDS
CITY OF THREE RIVERS, MICHIGAN SPECIFICATIONS FOR DRINKING WATER CHEMICAL BIDS The City of Three Rivers is committed to the concept of performance bids. All vendors are encouraged to submit bids which
More informationGUJARAT ENERGY TRANSMISSION CORPORATION LTD. TECHNICAL SPECIFICATIONS
GUJARAT ENERGY TRANSMISSION CORPORATION LTD. SARADAR PATEL VIDYUT BHAVAN, RACE COURSE, BARODA 390 007. TECHNICAL SPECIFICATIONS FOR 220, 132 & 66 COMPOSITE SOLIDCORE STATION POST INSULATORS GETCO/E/2,1,6
More informationSECTION 1 - INTENT, SYSTEM REQUIREMENT, DESIGN CRITERIA AND SCOPE
Customer : Tamil Nadu Transmission Corporation Limited. Section 1 SECTION 1 - INTENT, SYSTEM REQUIREMENT, DESIGN CRITERIA AND SCOPE 1.0.0 INTENT OF SPECIFICATION 1.1.0 This specification covers the design,
More informationTECHNICAL SPECIFICATION A.B. CABLE
TECHNICAL SPECIFICATION A.B. CABLE 1.0 NATURE OF WORK The work covered by this Specification is for L.T lines in A.B cable as specified herein and in the attached Schedules. The overhead distribution lines
More informationNIT/Bid Document No.:
-wzrowilainindvav3memalilaimant,- - SECTION 4 Technical & Special Conditions of Contract NOTE: TECHNICAL & SPECIAL CONDITIONS OF CONTRACT (SECTION-4) WILL SUPERSEED UPON ANY CONTRADICTORY STATEMENT IN
More informationREQUEST FOR PROPOSAL WAYFINDING SIGN DESIGN AND FABRICATION FOR THE CITY OF SALIDA, COLORADO
REQUEST FOR PROPOSAL WAYFINDING SIGN DESIGN AND FABRICATION FOR THE CITY OF SALIDA, COLORADO I. INVITATION AND INTENT The City of Salida invites all interested, qualified persons or firms capable of providing
More informationBharat Heavy Electricals Limited Piping Centre Chennai-17. Specification Number Revision Number Sheet Number PC:E:GF: of 7 CONTENTS
PC:E:GF:001 00 2 of 7 CONTENTS 1 SCOPE 2 PRODUCT SPECIFICATION 3 SURFACE PREPARATION 4 PRIMING 5 COATING 6 FIELD JOINTING 7 INSPECTION AND TESTING PC:E:GF:001 00 3 of 7 Technical Specification for Glass
More informationPakistan International Airlines
Pakistan International Airlines st Floor, Building, (PIAC), Head Office Karachi Airport-75200 75200. Tel: +92-21 21-99045131 / 5379, Fax: +92-21 21-34570120 E-mail mail: spo.fk@piac.aero / dgmpc@piac.aero
More informationGujarat Council of Elementary Education Sarva Shiksha Abhiyan
Package No. Pragna Printing /2015-16/A Gujarat Council of Elementary Education Sarva Shiksha Abhiyan REQUEST FOR PROPOSAL REGARDING PRAGNA PRINTING WORK "PACKAGE-A" UNDER SSA Name of Client STATE PROJECT
More informationQUOTATION ENQUIRY. Frequency Range Output AC Voltage Regulation (Batt. Mode) ±10% Frequency Range (Batt. Mode)
ANNEXURE-I-A QUOTATION ENQUIRY Ref: IIT (BHU)/IPCell/2017-18/UPS/1 KVA/574 Due Date: 26.09.2017 Date:16.09.2017 Upto 1:00 pm (Last date of quotation receiving) (Date of tender enquiry) To. Dear Sir, Please
More informationINVITATION TO BID CITY OF HOPKINSVILLE
INVITATION TO BID CITY OF HOPKINSVILLE Office of the Procurement Specialist 715 South Virginia Street P. O. Box 707 Hopkinsville, Kentucky 42241-0707 TITLE: DESIGN BUILD BUIDLING FOR THE CITY OF HOPKINSVILLE,
More informationDOMESTIC GAS REGULATORS
CNG & CITY GAS DISTRIBUTION PROJECT FOR BID DOCUMENT FOR DOMESTIC GAS REGULATORS UNDER DOMESTIC COMPETITIVE BIDDING Bid Document No.: TNGCL/C&P/P(101)/PRV/2013-14 Dated 06/06/2013 VOLUME II OF II PREPARED
More informationList of Enquiry Items for Enquiry BAP/PUR/FGD/EQS/2014/ E dt
List of Enquiry Items for Enquiry BAP/PUR/FGD/EQS/2014/4231581E dt 13.03.2014 Sl.No Material Code Description Unit Qty Destination 1. RFW301290000 EMERGENCY QUENCHING SYSTEM AT GGH INLET AS PER TECHNICAL
More informationSubject: Corrigendum-01: Clarification and Extension of Last Date of offer submission
---------------------------------------------------------Page 1 of 6------------------------------------------------------- To ALL BIDDERS Subject: Corrigendum-01: Clarification and Extension of Last Date
More informationTENDER DOCUMENT FOR SUPPLY AND INSTALLATION AIR CONDITIONER
TENDER DOCUMENT FOR SUPPLY AND INSTALLATION OF AIR CONDITIONER TRANSPORT COMMISSIONER,ORISSA 6 th FLOOR, RAJASWA BHAWAN,CUTTACK 1. TENDER CALL NOTICE Sealed quotations are invited from intending manufacturers/
More informationELECTRICAL INSPECTION BULLETIN (Effective )
ELECTRICAL INSPECTION BULLETIN (Effective 2009-02-01) Rule 36-000 Customer Owned High Voltage Installations With the increase in customer own high voltage equipment there appears to be confusion over which
More informationTECHNICAL SPECIFICATIONS FOR AERIAL BUNCHED CABLES FOR OVERHEAD DISTRIBUTION
TECHNICAL SPECIFICATIONS FOR AERIAL BUNCHED CABLES FOR OVERHEAD DISTRIBUTION 1 INTRODUCTION Aerial Bunched Cable (ABC) is a very novel concept for Over Head power distribution. When compared to the conventional
More informationTHE KENYA POWER AND LIGHTING CO. LTD
THE KENYA POWER AND LIGHTING CO. LTD SPECIFICATION for SINGLE PHASE STATIC METERS FOR ACTIVE ENERGY Compiled by NAME DESIGNATION SIGNATURE DATE Ephantus Nyagah Ag. Senior Engineer Checked by Approved by
More informationDate: November 30, Company: THE UNIVERSITY OF SOUTHERN MISSISSIPPI is considering the purchase of the following item(s). We ask that you submit
REQUEST FOR BIDS/PROPOSALS COVERSHEET THE UNIVERSITY OF SOUTHERN MISSISSIPPI Procurement and Contract Services 118 College Drive #5003, Hattiesburg, Mississippi 39406-0001 Name: Date: November 30, 2016
More informationBihar Renewable Energy Development Agency. Expression of Interest (EOI)
Bihar Renewable Energy Development Agency (A Government Agency under Energy Department) Expression of Interest (EOI) For Empanelment for Rate Contract for Design, Supply, Distribution and Comprehensive
More informationBharat Heavy Electricals Limited Centralised Stamping Unit, Jagdishpur
Tender No.:- TE/430840002/C-017 Date: 28.05.2014 TENDER NOTICE Sealed Tenders are invited in two-part bid system for supply of Enterprise Grade & 24 Port Network Switch r as per below details: SUBMISSION
More informationSEAL & SIGNATURE OF THE TENDERER
MAHARASHTRA STATE ELECTRICITY DISTRIBUTION CO. LTD. SCHEDULE - `A' TECHNICAL SPECIFICATION FOR 11 kv & 22 kv A.B. SWITCH. SPECIFICATION NO:RE/II/A.B.SWITCH/2005 INDEX -----------------------------------------------------------------------------------------------------------------------
More informationEXPRESSION OF INTEREST ( EoI ) APPLICATION FORM
EXPRESSION OF INTEREST ( EoI ) APPLICATION FORM (Ref : CPC/VDS/18/Open Ended EoI dt 28.12.2017) BEML LIMITED VENDOR DEVELOPMENT DEPARTMENT BEML SOUDHA S.R. NAGAR BANGALORE 560 027. 1 TYPE OF INDUSTRY DECLARATION
More informationTECHNICAL SPECIFICATION OF TOWER MATERIAL FOR132KV-PANTHER TRANSMISSION LINE
GUJARAT ENERGY TRANSMISSION CORPORATION LTD. Sardar Patel Vidyut Bhavan, Race Course, Vadodara: 390 007 TECHNICAL SPECIFICATION OF TOWER MATERIAL FOR132KV-PANTHER TRANSMISSION LINE GETCO/E/TS TM051/R0
More informationPART 7 Technical Specification for Overhead and Underground Service Connection works for the Year
PART 7 Technical Specification for Overhead and Underground Service Connection works for the Year 2016-17 Technical Specification for Overhead and Underground Service Connection works for the Year 2016-17
More informationTENDER DOCUMENT. TENDER No.: BHI/PI(S)/675/1007 FOR
TENDER DOCUMENT TENDER No.: BHI/PI(S)/675/1007 FOR Tender for supply of perforated cable tray for the Project of - Augmentation of Fuel & Flux Crushing Facilities (Pkg- 064) for Bhilai Steel Plant at Chhattisgarh
More informationTENDER DOCUMENT. Sub: Tender for Supply, Installation & Commissioning of Air Purifiers. Tender No. : Purchase: (AP) Date: 04/02/2016 PART A
TENDER DOCUMENT Sub: Tender for Supply, Installation & Commissioning of Air Purifiers Tender No. : Purchase: 2015-16 (AP) Date: 04/02/2016 PART A Sealed tenders are invited for supply, installation & commissioning
More informationMILITARY SPECIFICATION. PLASTIC MOLDING and EXTRUSION MATERIAL, POLYETHERETHERKETONE (PEEK)
20 June l984 1. SCOPE MILITARY SPECIFICATION PLASTIC MOLDING and EXTRUSION MATERIAL, POLYETHERETHERKETONE (PEEK) This specification is approved for use by all Departments and Agencies of the Department
More informationSCHEDULE-III TECHNICAL SPECIFICATION OF 11 KV CTPT METERING SETS AGAINST TN-2134
Common Spec-2134.doc - 1-3.01 SCOPE: SCHEDULE-III TECHNICAL SPECIFICATION OF 11 KV CTPT METERING SETS AGAINST TN-2134 This specification covers the design, manufacture, assembly, testing and delivery of
More informationSection - III Evaluation and Qualification Criteria
Section - III Evaluation and Qualification Criteria 1-2 Table of Clauses TABLE OF CLAUSES... 2 1. EVALUATION... 4 1.1 TECHNICAL EVALUATION... 4 1.2 ECONOMIC EVALUATION... 5 2. QUALIFICATION... 6 2.1 ELIGIBILITY...
More informationIECEE OPERATIONAL DOCUMENT
IECEE OD-G-4001 Edition 1.3 2013-06-20 IECEE OPERATIONAL DOCUMENT IEC System of Conformity Assessment Schemes for Electrotechnical Equipment and Components (IECEE System) Guidance for Factory Inspectors
More informationAddendum No.1 (SUMMARY SHEET) Modifications to Tender Documents S.No. Document In Place of Please read as Remarks
Contract: DMRC-MU-LINE2A-AEUD-03R TURNKEY PROJECT OF DESIGN, SUPPLY, ERECTION, TESTING &COMMISSIONING FOR MODIFICATION & RAISING OF +HEIGHT OF 110KV TRANSMISSION LINE (BORIVALI- MALAD) SPAN 41 AND 42 &(MALAD-ESSELWORLD)
More informationTECHNICAL SPECIFICATION FOR 11mtr. LONG STEEL TUBULAR POLE
Annexure-A TECHNICAL SPECIFICATION FOR 11mtr. LONG STEEL TUBULAR POLE 1.0 SCOPE 1.1 This specification covers the design, manufacture, testing at works, supply / delivery & transportation of 11 mtr long
More informationSTATE BANK OF INDIA, LOCAL HEAD OFFICE, CHANDIGARH
STATE BANK OF INDIA, LOCAL HEAD OFFICE, CHANDIGARH REQUEST FOR EXPRESSION OF INTEREST FOR EMPANELMENT OF VENDORS FOR LAN/DATA CABLING WORK IN THE BRANCHES/AOs/SBLCs OF CHANDIGARH, CIRCLE EOI REFERENCE
More informationTechnical Specifications 25 KVA/40 KVA L.T. DISTRIBUTION BOX WITH KITKATs (for Rural Area) NO. DIST/DB/ 03/2006 INDEX
Technical Specifications 25 KVA/40 KVA L.T. DISTRIBUTION BOX WITH KITKATs (for Rural Area) NO. DIST/DB/ 03/2006 INDEX CL. NO. CONTENTS. SCOPE 2. SERVICE CONDITIONS 3. SYSTEM DETAILS 4. APPLICABLE STANDARDS
More informationKenya Power and Lighting Company VI Contract A31
Kenya Power and Lighting Company VI 4.1.6-1 Contract A31 4.1.6. TELECOMMUNICATIONS... 2 4.1.6.1. General requirements... 2 4.1.6.2. SCOPE OF WORK... 2 4.1.6.3. OPGW... 3 4.1.6.4. Optical Distribution Flames
More informationCOMMERCIAL ITEM DESCRIPTION INSULATION TAPE, ELECTRICAL, SELF-ADHERING UNSUPPORTED SILICONE RUBBER
INCH-POUND A-A-59163A 5 November 2010 SUPERSEDING A-A-59163 13 February 1998 COMMERCIAL ITEM DESCRIPTION INSULATION TAPE, ELECTRICAL, SELF-ADHERING UNSUPPORTED SILICONE RUBBER The General Services Administration
More informationNIT LIMITED NO. C-195-PLAN-SPS ANTI-REFLECTION (AR) COATED OPTICAL LENSES
NIT LIMITED NO. C-195-PLAN-SPS-14-15 ANTI-REFLECTION (AR) COATED OPTICAL LENSES NATIONAL INSTITUTE OF SCIENCE EDUCATION & RESEARCH INSTITUTE OF PHYSICS CAMPUS, P.O.: SAINIK SCHOOL, BHUBANESWAR-751 005
More informationinstitutions and Public Sector Undertakings for similar works.
Limited Cuffe Parade, Mumbai 400 005 Ph: (022) 6655 3355; Fax: (022) 2218 0411 Notice inviting tender for Architects / Consultants for Electrical, HVAC and Allied Works at IDBI Office building at CBD Belapur,
More informationTender Notice. -sd-(pitam Singh) Dy. Director Administration (Drugs)
F. NO.D.21013/124/2013-DC GOVERNMENT OF INDIA MINISTRY OF HEALTH & FAMILY WELFARE DIRECTORATE GENERAL OF HEALTH SERVICES CENTRAL DRUGS STANDARD CONTROL ORGANISATION (DRUGS CONTROL SECTION) FDA BHAWAN,
More informationINVITATION FOR BID BID #1037 Parka and Softshell Coats
IFB: Bid #1037 Parka and Softshell Coats INVITATION FOR BID BID #1037 Parka and Softshell Coats ST. CHARLES COUNTY AMBULANCE DISTRICT (Herein referred to as District ) 4169 OLD MILL PARKWAY ST. PETERS,
More informationJAMIA HAMDARD HAH CENTENARY HOSPITAL HAMDARD NAGAR, NEW DELHI Phone : , Extn 5326 Website :
Phone : 26059688, Extn 5326 Website : www.jamiahamdard.edu NOTICE INVITING TENDER Sealed tenders are invited from the manufacturers / authorized distributors / importers for annual rate contract for the
More informationNIT LIMITED NO. NC-39-SBS-P-CMB WATERBATH
NIT LIMITED NO. NC-39-SBS-P-CMB-16-17 NATIONAL INSTITUTE OF SCIENCE EDUCATION & RESEARCH JATNI CAMPUS, P.O.: JATNI, Khurdha-752050 Tender Notice No. NIT Limited NO.NC-39-SBS-P-CMB-16-17 Sealed Tenders
More informationCITY OF THREE RIVERS, MICHIGAN Specifications for Bids. Tree and/or Stump Removal Performance Bids
CITY OF THREE RIVERS, MICHIGAN Specifications for Bids Tree and/or Stump Removal Performance Bids The City of Three Rivers is committed to the concept of performance bids. All vendors are encouraged to
More informationUniversity of Lucknow
Sealed Tenders are invited from registered Contractors for supply of slotted angle racks. For details and tender set, place visit www.lkouniv.ac.in Engineering CONDITIONS FOR: Supply of slotted angle racks
More informationSARDAR VALLABHBHAI NATIONAL INSTITUTE OF TECHNOLOGY,SURAT
SARDAR VALLABHBHAI NATIONAL INSTITUTE OF TECHNOLOGY,SURAT TENDER NOTICE Sealed tenders are invited in duplicate from the supplier/manufacturer/distributor/vendor for the supply of the following items.
More informationNIT LIMITED NO. NC-311-SBS-P-CMB PERISTALTIC PUMP
NIT LIMITED NO. NC-311-SBS-P-CMB-15-16 NATIONAL INSTITUTE OF SCIENCE EDUCATION & RESEARCH JATNI CAMPUS, P.O.: JATNI, Khurdha-752050 Tender Notice No. NIT Limited NO.NC-311-SBS-P-CMB-15-16 Sealed Tenders
More informationSPECIFICATION SHEET JUNCTION BOXES
SPECIFICATION SHEET JUNCTION BOXES 8484-SS8201-8010 0 DOCUMENT NO REV SHEET 1 OF 1 CLIENT : HPCL, MUMBAI PROJECT : LPG BOTTLING PLANT, ANANTAPUR PLANT : - LPG BOTTLING PLANT ISSUED FOR : PROPOSAL ENQUIRY
More informationGUJARAT ENERGY TRANSMISSION CORPORATION LTD. TECHNICAL SPECIFICATIONS. 66 kv LIGHTNING ARRESTORS
GUJARAT ENERGY TRANSMISSION CORPORATION LTD. SARADAR PATEL VIDYUT BHAVAN, RACE COURSE, BARODA 390 007. TECHNICAL SPECIFICATIONS FOR 66 kv LIGHTNING ARRESTORS GETCO/ENGG/TECH SPECI.- 66 KV LA/R4/Jan11 Sign
More informationDepartmental Procedure PURCHASE DP: PUR (Aligned to Quality Manual and ISO 9001:2008)
Departmental Procedure PURCHASE DP: PUR (Aligned to Quality Manual and ISO 9001:2008) This manual is to be returned to Head (PUR) when the individual has no further requirement for it or when he ceases
More informationMATERIAL SPECIFICATION FOR BEARINGS - ELASTOMERIC PLAIN AND STEEL LAMINATED
ONTARIO PROVINCIAL STANDARD SPECIFICATION METRIC OPSS.PROV 1202 NOVEMBER 2016 MATERIAL SPECIFICATION FOR BEARINGS - ELASTOMERIC PLAIN AND STEEL LAMINATED TABLE OF CONTENTS 1202.01 SCOPE 1202.02 REFERENCES
More informationSystems Commissioning Table of Contents
Systems Commissioning Table of Contents C NC NA I. General II. Commissioning III. Mechanical Systems A. Testing, Adjusting, and Balancing B. Piping IV. Electrical Systems A. Load Balancing B. Electrical
More information2. TEST RECORDS: All records of tests and analysis shall be kept in suitable forms approved by the Bureau.
SCHEME OF TESTING AND INSPECTION FOR CERTIFICATION OF CARBON STEEL BILLETS, BLOOMS, SLABS AND BARS FOR FORGINGS ACCORDING TO IS:1875-1992 (Fifth Revision) 1. LABORATORY: A laboratory shall be maintained
More informationDMRC ELECTRICAL STANDARDS & DESIGN WING (DESDW)
DELHI METRO RAIL CORPORATION LIMITED DMRC ELECTRICAL STANDARDS & DESIGN WING (DESDW) SPECIFICATION NO. DMES- T/0018/ DMRC-E-TR-CABLE-2 SPECIFICATIONS FOR 33 kv CABLES FOR ELEVATED AND Issued on: Date Stage
More informationWOOD FLOORING WOOD FLOORING
09550 - WOOD FLOORING 09550-1 PART ONE: GENERAL 1.1 Description WOOD FLOORING 1.1.1 Work in this Section, as shown or specified, shall be provided by the Interior Contractor and shall be in accordance
More information