SECTION BROADLOOM CARPET
|
|
- Reynold Maxwell
- 6 years ago
- Views:
Transcription
1 SECTION PART I - GENERAL 1.01 DESCRIPTION A. Scope: Work under this Section shall include all materials and installation necessary to provide Carpet as shown and detailed on the Drawings and specified herein, including: 1. Broadloom carpet B. Related Sections include the following: 1.02 SUBMITTALS 1. Division 9, Section RESILIENT FLOORING ACCESSORIES 2. Division 7, Section WATER VAPOR EMISSION CONTROL BARRIER A. Product Data: For each type of product indicated. Include manufacturer's written data on physical characteristics, durability, fade resistance and warranty. Include installation recommendations for each type of substrate required. 1. Identify intended adhesives for each product and subsurface B. Shop Drawings: Show the following: 1. Columns, doorways, enclosing walls or partitions, built-in cabinets, and locations where cutouts are required in carpet. 2. Existing flooring materials to remain. 3. Carpet type, color, and dye lot. 4. Locations where dye lot changes occur. 5. Seam locations, types, and methods. 6. Pattern type, repeat size, location, and starting point. 7. Pile direction: Identify if carpet is quarter turned or not. 8. Type, color, pile direction, and location of insets and borders. 9. Type, color, and location of edge, transition, and other accessory strips. 10. Transition details to other flooring materials. C. Samples: For each of the following products and for each color and texture required. Label each Sample with manufacturer's name, material description, color, pattern, and designation indicated on Drawings and in schedules. 1. Carpet: Manufacturers standard carpet sample
2 2. Flooring Accessories: Standard manufacturers sample size in color selected. D. Product Schedule: Use same room and product designations indicated on Drawings and in schedules. E. Maintenance Data: For carpet to include in maintenance manuals specified in Division 1. Include the following: 1.03 QUALITY ASSURANCE 1. Methods for maintaining carpet, including cleaning and stain-removal products and procedures and manufacturer's recommended maintenance schedule. 2. Precautions for cleaning materials and methods that could be detrimental to carpet. A. Installer Qualifications: An experienced installer who is certified by the Floor Covering Installation Board or who can demonstrate compliance with its certification program requirements. B. Product Options: Products and manufacturers named in Part 2 establish requirements for product quality in terms of appearance, construction, warranty and performance. Other manufacturers' products must be comparable in appearance, construction, warranty, and performance to named products and comply with all requirements to be considered. Refer to Division 1 Section "Substitutions." 1.04 DELIVERY, STORAGE, AND HANDLING A. General: Comply with CRI 104, Section 5, "Storage and Handling." 1.05 PROJECT CONDITIONS A. General: Comply with CRI 104, Section 6.1, "Site Conditions; Temperature and Humidity." B. Environmental Limitations: Do not install carpet until wet work in spaces is complete and dry, and ambient temperature and humidity conditions are maintained at the levels indicated for the Project when occupied for its intended use. C. Examine existing substrate areas and do not install carpet until concrete slabs have cured and are sufficiently dry to bond with adhesives. See section 3.01 Examination and comply with all the requirements. D. Where demountable partitions or other items are indicated for installation on top of carpet, install carpet before installing these items WARRANTY A. Carpet Warranty: Written warranty, signed by carpet manufacturer agreeing to replace carpet that does not comply with requirements or that fails within specified warranty period. Warranty does not include deterioration or failure of carpet due to unusual traffic, failure of substrate, vandalism, or abuse. 1. Wear: Limited Lifetime Wear and Backing Warranty
3 1.07 EXTRA MATERIALS 2. Static: Lifetime of carpet. 3. Edge Ravel: Lifetime of carpet. Guaranteed no edge ravel in normal use 4. Delamination: Lifetime of carpet with normal use. Chair pads not required but are recommended for maximum texture retention. 5. Tuft Bind: Lifetime of carpet. 6. Adhesive: Lifetime of carpet. 7. Stain Resistance: Lifetime of carpet and a 10-year light fastness and atmospheric contaminant warranty. A. Furnish extra materials described below, before installation begins, that match products installed and that are packaged with protective covering for storage and identified with labels describing contents and Project location. 1. Carpet: Full-width rolls equal to 5% of amount installed for each type indicated, but not less than 10 sq. yd. PART II - PRODUCTS 2.01 ACCEPTABLE MANUFACTURERS & YARN TYPE 1. Mannington Type 6.6 (use current UC Purchasing Agreement) 2. Bentley Type 6.6 (use current UC Purchasing Agreement) 3. Lee s Type 6.6 (use current UC Purchasing Agreement) 2.02 CARPET A. Available Products: Subject to compliance with requirements, products that may be incorporated into the Work include, but are not limited to, the following: B. Manufacturer: Mannington, or equal. (Consultant to modify per project) 1. Style Name: Teres 2. Construction: Textured Patterned Loop 3. Color: Ginseng # Gauge: 5/64 5. Face Yarn: Antron Legacy or Lumina 6.6 nylon with XGuard soil protection. 6. Dye System: Solution/Yarn Dyed 7. Fiber Technology: Bleach Resistant - ColorSafe
4 8. Face Yarn Weight: 26 oz. 9. Backing Material: Integra 10. Size/Width: Density: 6,000 or greater 12. Environmental Certificates: CR1 Green Label Plus. NSF/ANSI 140 Gold C. Performance Characteristics: As follows: 1. Static: 3.0 KV, Standard Shuffle Test [70 F (21 C); 20% RH 2. Flammability: Passes DOC-FF-1-70 Pill Test 3. Flooring Radiant Panel Test: Meets NFPA Class 1 for ASTM E-648 glue down 4. Smoke Density: NBS Smoke Chamber NFPA-298, less than 455 flaming mode 5. Construction Materials: 100% man-made 2.03 INSTALLATION ACCESSORIES A. Trowelable Leveling and Patching Compounds: Latex-modified, hydraulic-cement-based formulation provided by or recommended by the following: 1. Carpet manufacturer. B. Adhesives: Green Label, Non-flammable water-resistant, mildew-resistant, nonstaining type to suit products and subfloor conditions indicated, that complies with flammability and emissions requirements for installed carpet and that is recommended by the following: 1. Carpet manufacturer. C. Tackless Carpet Stripping: Water-resistant plywood in strips as required to match cushion thickness and that comply with CRI 104, Section D. Seaming Cement: Hot-melt adhesive tape or similar product recommended by carpet manufacturer for taping seams and butting cut edges at backing to form secure seams and to prevent pile loss at seams. E. Protective Edge Strips (if required): Style and height required to protect exposed edge of carpet: Provide in maximum lengths to minimize abutted joints
5 PART III - EXECUTION 3.01 EXAMINATION A. Examine existing substrates, areas, and conditions where installation of resilient products will occur, with Installer present, for compliance with manufacturer's requirements. Verify the substrates and conditions are free of defects and fully comply with manufacturer's specified requirements for resilient product installation. Determine adhesion, moisture and PH levels by conducting the following tests conducted by Independent Testing Agencies certified by ICRI (International Concrete Repair Institute). Provide test results to the University's Representative prior to the flooring installation. (Consultant to omit if all new concrete substrates or PH and probe test deemed not required by University s Representative) 1. Refer to Section Water Vapor Control Barrier, Submittals 1.04, D Testing and comply with all requirements. 2. ASTM D Standard Adhesion Strength test 3. ASTM F 2170 Standard test to measure relative humidity using Insitu Probes manufactured by Wagner Electronics. 4. ASTM F 710 Standard test to measure Alkalinity levels conducted with an electronic PH Meter manufactured by Wagner Electronics. B. Do not install sheet floor coverings over new concrete slabs until they have fully cured, free of defects and are sufficiently dry to bond with the adhesives. Verify the substrates and conditions fully comply with manufacturer's specified requirements for resilient product installation. Determine adhesion, moisture and PH levels by conducting the following tests conducted by Independent Testing Agencies certified by ICRI (International Concrete Repair Institute). Provide the test results to the University's Representative prior to any floor installation. (Consultant to omit if all new existing substrates) 1. Refer to Section Water Vapor Control Barrier, Submittals 1.04, D Testing and comply with all requirements. 2. ASTM D Standard Adhesion Strength test 3. ASTM F 2170 Standard test method for relative humidity using Insitu Probes manufactured by Wagner Electronics. 4. ASTM F 710 Standard test to measure Alkalinity levels conducted with an electronic PH Meter manufactured by Wagner Electronics. C. Subfloor Finishes comply with requirements specified in Division 3, Section Cast- In-Place Concrete for new slabs receiving resilient flooring. 1. Subfloors are free of cracks, ridges, depressions, scale, and foreign deposits. D. Do not proceed with installation until unsatisfactory conditions have been corrected including but not limited to excessive moisture mitigation refer to section Water Vapor Emission Control Barrier
6 E. For wood subfloors, verify the following: 1. Underlayment over subfloor complies with requirements specified in Division 6 - ROUGH CARPENTRY." 2. Underlayment surface is free of irregularities and substances that may interfere with adhesive bond or show through surface. F. Proceed with installation only after unsatisfactory conditions have been corrected PREPARATION A. General: Comply with CRI 104, Section 6.2, "Site Conditions; Floor Preparation," and carpet manufacturer's written installation instructions for preparing substrates indicated to receive carpet installation. B. Cracks and holes in sub-floor should be filled with a quality latex underlayment powder and sealed with a latex admixture. Seal all dry, porous concrete slabs with an appropriate sealer. Use trowelable leveling and patching compounds, according to manufacturer's written instructions, to fill cracks, holes, and depressions in substrates. C. Subfloors must be structurally sound, dry, and free of dust, dirt, paint, grease, curing agents, and foreign matter. D. Remove coatings, including curing compounds, and other substances that are incompatible with adhesives and that contain soap, wax, oil, or silicone, without using solvents. Use mechanical methods recommended in writing by the following: 1. Carpet manufacturer. E. Broom and vacuum clean substrates to be covered immediately before installing carpet. After cleaning, examine substrates for moisture, alkaline salts, carbonation, or dust. Proceed with installation only after unsatisfactory conditions have been corrected INSTALLATION A. Direct-Glue-Down Installation: Comply with written manufacturer's installation instructions for each pattern specified. B. Comply with carpet manufacturer's written recommendations for seam locations and pile direction. At doorways, center seams under the door in closed position. C. Do not use more than one (1) dye lot in a room. If more than one (1) dye lot is required, show split on shop drawings. D. Do not bridge building expansion joints with carpet. E. Cut and fit carpet to butt tightly to vertical surfaces, permanent fixtures, and built-in furniture including cabinets, pipes, outlets, edgings, thresholds, and nosings. Bind or seal cut edges as recommended by carpet manufacturer. F. Extend carpet into toe spaces, door reveals, closets, open-bottomed obstructions, removable flanges, alcoves, and similar openings
7 G. Maintain reference markers, holes, and openings that are in place or marked for future cutting by repeating on finish flooring as marked on subfloor. Use nonpermanent, nonstaining marking device. H. Install pattern parallel to walls and borders CLEANING AND PROTECTION A. Perform the following operations immediately after installing carpet: 1. Remove excess adhesive, seam sealer, and other surface blemishes using cleaner recommended by carpet manufacturer. 2. Remove yarns that protrude from carpet surface. 3. Vacuum carpet using commercial machine with face-beater element. B. Protect installed carpet to comply with CRI 104, Section 15, "Protection of Indoor Installations." C. Protect carpet against damage from construction operations and placement of equipment and fixtures during the remainder of construction period. Use protection methods indicated or recommended in writing by carpet manufacturer. END OF SECTION
End of Addendum No. 3
ADDENDUM NO. 3 DATE: May 5, 2017 PROJECT: OWNER: BID DATE: Jail Renovations Monday, May 8, 2017 at 2:00 pm The following shall be incorporated into the Contract Documents dated 19 APR 2017. PROJECT MANUAL
More informationStudent Services & Classroom Addition
SECTION 096813 - TILE CARPETING PART 1 - GENERAL 1.1 RELATED DOCUMENTS A. Drawings and general provisions of the Contract, including General and Supplementary Conditions and Division 01 Specification Sections,
More informationSECTION TILE CARPETING
SECTION 096813 TILE CARPETING PART 1 - GENERAL 1.1 RELATED DOCUMENTS A. Drawings and General Provisions of the Contract, including General and Supplementary Conditions and Division 01 Specification Sections,
More informationNORTHWESTERN UNIVERSITY PROJECT NAME JOB # ISSUED: 03/29/2017
SECTION 09 6816 - SHEET CARPETING PART 1 - GENERAL 1.1 RELATED DOCUMENTS A. Drawings and general provisions of the Contract, including General and Supplementary Conditions and Division 01 Specification
More informationSPECIFICATIONS - CARPET TILE 09681
SPECIFICATIONS - CARPET TILE 09681 PART 1 - GENERAL 1.1 RELATED DOCUMENTS A. Drawings and general provisions of the Contract, including General and Supplementary Conditions and Division 1 Specification
More informationBuildingName The Description of the Project P DOCUMENTS
ARCHITECTURE, ENGINEERING AND CONSTRUCTION P00000000 0000 DOCUMENTS ARCHITECTURE & ENGINEERING 326 East Hoover, Mail Stop B Ann Arbor, MI 48109-1002 Phone: 734-764-3414 Fax: 734-936-3334 SPECIFICATION
More informationSECTION R CARPET PART 1 - GENERAL 1.1 SUMMARY
SECTION 09 68 13R CARPET PART 1 - GENERAL 1.1 SUMMARY A. This section covers the specification standards for modular and broadloom carpet. It includes construction, submittals, installation and warranty
More informationB. Samples: For each exposed product and for each color and pattern specified.
SECTION 096519 - RESILIENT TILE FLOORING PART 1 - GENERAL 1.1 SUMMARY A. Section Includes: 1. Vinyl composition floor tile. 2. Vinyl composition floor tile (VCT) shall be installed in each Unit at / in
More informationARCHITECTURAL GUIDE SPECIFICATIONS - DESCRIPTIVE
ARCHITECTURAL GUIDE SPECIFICATIONS - DESCRIPTIVE MANNINGTON COLORFIELDS SHEET RUBBER FLOORING Section 09 65 16 Sheet rubber Flooring (Thermoset Rubber) Created May 2012 Mannington Mills, Inc. P. O. Box
More informationSAN DIEGO STATE UNIVERSITY PACIFIC CORNERSTONE ARCHITECTS TENOCHCA HALL PROJECT NO FAN COIL UNITS, RESTROOM AND FINISH RENOVATION
SECTION 09 68 13 TILE CARPETING PART 1 - GENERAL 1.1 SUMMARY A. Section Includes: 1. Modular carpet tile. (CP1, CP2A, CP2B, CP2C) 2. Installation materials, including adhesives. 3. Supplementary components,
More informationSECTION RESILIENT TILE FLOORING. A. Section includes vinyl composition floor tile and accessories indicated and as specified.
SECTION 09 65 19 RESILIENT TILE FLOORING PART 1 - GENERAL 1.1 SUMMARY A. Section includes vinyl composition floor tile and accessories indicated and as specified. 1.2 SUBMITTALS A. Product Data: Submit
More informationACADEMIC SUCCESS CENTER THE COLLEGE AT BROCKPORT STATE UNIVERSITY OF NEW YORK PROJECT NO
SECTION 09 65 16 - RESILIENT SHEET FLOORING PART 1 - GENERAL 1.1 RELATED DOCUMENTS A. Drawings and general provisions of the Contract, including General and Supplementary Conditions and Division 01 Specification
More informationUnion County Vocational - Technical Schools Scotch Plains, New Jersey
SECTION 096519 - RESILIENT TILE FLOORING PART 1 - GENERAL 1.1 RELATED DOCUMENTS A. Drawings and general provisions of the Contract, including General and Supplementary Conditions and Division 01 Specification
More informationB. Store products in dry spaces protected from the weather, with ambient temperatures maintained between 50 and 90 deg F (10 and 32 deg C).
SECTION 09651 - RESILIENT TILE FLOORING PART 1 - GENERAL 1.1 RELATED DOCUMENTS A. Drawings and general provisions of the Contract, including General and Supplementary Conditions and Division 1 Specification
More informationD. Maintenance data for resilient floor tile to include in Operating and Maintenance Manual specified in Division 1.
SECTION 09660 RESILIENT TILE FLOORING PART 1 - GENERAL 1.01 RELATED DOCUMENTS A. Drawings and general provisions of the Contract, including General and Supplementary Conditions and Division 1 Specification
More informationARCHITECTURAL GUIDE SPECIFICATIONS
ARCHITECTURAL GUIDE SPECIFICATIONS MANNINGTON COLORSCAPE, COLORSPEC, & ONE-STEP STAIR TREADS Section 09 65 13.23 Resilient Stair Treads [Thermoset Rubber Type TS] Created November, 2008 Mannington Mills,
More informationSECTION RESILIENT FLOORING ACCESSORIES
SECTION 09653 PART I - GENERAL 1.01 DESCRIPTION A. Scope: Work of this Section shall include all materials and installation necessary to provide Resilient Wall Base and Accessories, including resilient
More informationSection RESILIENT TILE FLOORING INCLUDING VINYL COMPOSITION TILE
THIS DOCUMENT IS INTENDED AS A SUGGESTED GUIDE FOR CREATING, MODIFYING, OR EDITING YOUR CSI FORMATTED 3-PART ARCHITECTURAL GUIDE SPECIFICATIONS. TARKETT WILL NOT BE LIABLE FOR ANY DAMAGES ARISING OUT OF
More informationMILLIKEN SHALL NOT BE LIABLE FOR ANY DAMAGES ARISING OUT OF THE USE OF ANY OF ITS GUIDE SPECIFICATIONS.
MILLIKEN SHALL NOT BE LIABLE FOR ANY DAMAGES ARISING OUT OF THE USE OF ANY OF ITS GUIDE SPECIFICATIONS. SECTION 09 68 13 Modular Carpet Tile Carpeting using Milliken Moisture Extreme Spray Adhesive, Renovation
More informationSection STATIC DISSIPATIVE RESILIENT FLOORING
THIS DOCUMENT IS INTENDED AS A SUGGESTED GUIDE FOR CREATING, MODIFYING, OR EDITING YOUR CSI FORMATTED 3-PART ARCHITECTURAL GUIDE SPECIFICATIONS. TARKETT WILL NOT BE LIABLE FOR ANY DAMAGES ARISING OUT OF
More informationSection RESILIENT TILE FLOORING INCLUDING ECONATURALS RUBBER FLOOR TILE
THIS DOCUMENT IS INTENDED AS A SUGGESTED GUIDE FOR CREATING, MODIFYING, OR EDITING YOUR CSI FORMATTED 3-PART ARCHITECTURAL GUIDE SPECIFICATIONS. TARKETT WILL NOT BE LIABLE FOR ANY DAMAGES ARISING OUT OF
More informationMILLIKEN SHALL NOT BE LIABLE FOR ANY DAMAGES ARISING OUT OF THE USE OF ANY OF ITS GUIDE SPECIFICATIONS.
MILLIKEN SHALL NOT BE LIABLE FOR ANY DAMAGES ARISING OUT OF THE USE OF ANY OF ITS GUIDE SPECIFICATIONS. SECTION 09 68 13 Modular Carpet Tile Carpeting using Milliken Non-Reactive Standard Adhesive, New
More informationSection RESILIENT SAFE-T VINYL SHEET FLOORING
RESILIENT SAFE-T VINYL SHEET FLOORING THIS DOCUMENT IS INTENDED AS A SUGGESTED GUIDE FOR CREATING, MODIFYING, OR EDITING YOUR CSI FORMATTED 3-PART ARCHITECTURAL GUIDE SPECIFICATIONS. TARKETT WILL NOT BE
More informationCONDUCTIVE RESILIENT FLOORING
THIS DOCUMENT IS INTENDED AS A SUGGESTED GUIDE FOR CREATING, MODIFYING, OR EDITING YOUR CSI FORMATTED 3-PART ARCHITECTURAL GUIDE SPECIFICATIONS. JOHNSONITE WILL NOT BE LIABLE FOR ANY DAMAGES ARISING OUT
More informationSECTION RESILIENT ATHLETIC SURFACING. B. Related Sections: Section(s) related to this section include:
CONNOR PowerDrop Page 1 SECTION 09624 RESILIENT ATHLETIC SURFACING PART 1 - GENERAL 1.01 SUMMARY A. Section includes: Resilient athletic surfacing, including [recycled] [virgin] rubber flooring B. Related
More informationSECTION (09620) - RESILIENT ATHLETIC FLOORING
PART 1 GENERAL 1.01 SUMMARY SECTION 09 65 66 (09620) - RESILIENT ATHLETIC FLOORING A. Section Includes: 1. Resilient Athletic Flooring a. Adhesive and Accessories B. Related Sections: 1.02 REFERENCES 1.
More informationCONDUCTIVE RESILIENT FLOORING
THIS DOCUMENT IS INTENDED AS A SUGGESTED GUIDE FOR CREATING, MODIFYING, OR EDITING YOUR CSI FORMATTED 3-PART ARCHITECTURAL GUIDE SPECIFICATIONS. JOHNSONITE WILL NOT BE LIABLE FOR ANY DAMAGES ARISING OUT
More informationPART 1 GENERAL RESILIENT SHEET FLOORING
SECTION 09 65 16 (09652) PART 1 GENERAL 1.1 SUMMARY A. Section Includes: 1. Resilient Sheet Flooring a. All seams heat-welded. 1.2 REFERENCES A. Americans with Disabilities Act (ADA) II Public Accommodations
More informationLINOLEUM SHEET FLOORING
THIS DOCUMENT IS INTENDED AS A SUGGESTED GUIDE FOR CREATING, MODIFYING, OR EDITING YOUR CSI FORMATTED 3-PART ARCHITECTURAL GUIDE SPECIFICATIONS. JOHNSONITE WILL NOT BE LIABLE FOR ANY DAMAGES ARISING OUT
More informationDivision 09. Finishes
09 00 00. Finishes 09 05 00. Common Work Results for Finishes 09 05 05. General Requirements for Finishes 1. It is the goal of the University to use sustainable finishes to the greatest extent possible.
More informationGUIDE SPECIFICATION
GUIDE SPECIFICATION 09 64 33.01 Kährs Canvas Collection 940 Centre Circle, Suite 1000 Altamonte Springs, FL 32714 Tim Colgan Telephone: 407-492-2441 Fax: 407-260-9933 Tim.colgan@kahrs.com Web Site: http://www.kahrs.com
More informationA. American Association of Textile Chemists and Colorists (AATCC): 1. AATCC 16, Test Method of Colorfastness to Light.
PART 1: GENERAL 1.01 Scope of Standard A. This standard provides general guidance concerning the specific preferences of Texas State University-San Marcos for sheet carpet. B. Texas State University-San
More informationSection RESILIENT TILE FLOORING INCLUDING SOLID VINYL FLOOR TILE
THIS DOCUMENT IS INTENDED AS A SUGGESTED GUIDE FOR CREATING, MODIFYING, OR EDITING YOUR CSI FORMATTED 3-PART ARCHITECTURAL GUIDE SPECIFICATIONS. TARKETT WILL NOT BE LIABLE FOR ANY DAMAGES ARISING OUT OF
More informationRESILIENT ACCESSORIES
INCLUDING COVE CAP, CHAIR RAIL, CORNER GUARD, TUB MOULDING, COVE FILLER STRIP AND SUBFLOOR LEVELER SYSTEM THIS DOCUMENT IS INTENDED AS A SUGGESTED GUIDE FOR CREATING, MODIFYING, OR EDITING YOUR CSI FORMATTED
More informationBid No. B14-09 Building 900 Cafeteria, Multi-Purpose Room Renovation Flooring
Bid No. B14-09 Cafeteria, Multi-Purpose Room Renovation Flooring Addendum No. 1 This Addendum No. 1 sets forth modifications to portions of the bid and contract documents for the above-referenced work
More informationGUIDE SPECIFICATION
GUIDE SPECIFICATION 09 64 33.01 940 Centre Circle, Suite 1000 Altamonte Springs, FL 32714 Telephone: 407-260-9910 Fax: 407-260-9933 Toll Free: 800-800-5247 Web Site: http://www.kahrs.com This Guide Specification
More informationSECTION RESINOUS FLOORING
SECTION 09705 PART I - GENERAL 1.01 DESCRIPTION A. Scope: Work of this Section includes all materials and installation necessary to provide resinous flooring system with integral cove base and top finish
More informationSECTION WOOD STRIP FLOORING
SECTION 096429 WOOD STRIP FLOORING PART 1 GENERAL 1.1 GENERAL REQUIREMENTS A. Work of this Section, as shown or specified, shall be in accordance with the requirements of the Contract Documents. 1.2 SECTION
More informationSECTION CARPET Summary A. This Section includes carpet, carpet adhesive, and carpet accessories.
SECTION 09680 CARPET PART 1 - GENERAL 1.01 Summary A. This Section includes carpet, carpet adhesive, and carpet accessories. 1.02 Submittals A. Product Data: Provide complete product data for each type
More informationSECTION RESILIENT TILE FLOORING PART 1 GENERAL
SECTION 09650 RESILIENT TILE FLOORING PART 1 GENERAL 1.0 SCOPE A. Drawings and general provisions of the Contract, including General and Supplementary General Conditions and Division 00 & 01 specification
More informationRESILIENT PHOTOLUMINESCENT STAIR TREADS
THIS DOCUMENT IS INTENDED AS A SUGGESTED GUIDE FOR CREATING, MODIFYING, OR EDITING YOUR CSI FORMATTED 3-PART ARCHITECTURAL GUIDE SPECIFICATIONS. JOHNSONITE WILL NOT BE LIABLE FOR ANY DAMAGES ARISING OUT
More informationPART 1 GENERAL RESILIENT ACCESSORIES
SECTION 09 65 13.33 (09655) PART 1 GENERAL 1.1 SUMMARY A. Section Includes: 1. Resilient Base 2. Transition Edges 3. Stair Nosings 1.2 REFERENCES A. ASTM International Publications: 1. C241 Standard Test
More informationRESILIENT FLOORING: Hot and Heavy - Secoya
160 South Industrial Blvd. Calhoun, GA 30701 Section 096519 RESILIENT FLOORING: Hot and Heavy - Secoya This document is intended as a suggested guide for editing your architectural guide specification.
More informationSECTION TILE CARPETING
SECTION 09 68 13 TILE CARPETING PART 1 - GENERAL 1.01 SUMMARY A. Section Includes: Carpet tile and accessories. B. Drawings and general provisions of the Contract, including General and Supplementary Conditions
More informationDivision 09 Finishes Section Ohio Utilities Protection Service New Office Building Bid Package B CARPETING
SECTION 09 68 00 CARPETING PART 1 GENERAL 1.1 SUMMARY A. Section includes: 1. Carpet Tile. 2. Carpet Base. 3. Adhesives and Accessories. B. Related Sections: Documents relating to the work of this section
More information[rotating carpet tiles] FreePattern
[rotating carpet tiles] FreePattern FreePattern [rotating carpet tiles] FreePattern Rotating Carpet Tiles Collection is the only modular floor covering specifically designed to allow a multitude of patterns
More informationHillsborough County Aviation Authority Solicitation Addendum
Hillsborough County Aviation Authority Solicitation Addendum Addendum No.: 1 Solicitation No.: 14-411-001 Project No.: 5870 13 Solicitation Title: Airside F Boarding Level Carpet Replacement Addendum Date:
More informationA. This section includes pre-finished Higuera Hardwoods bamboo flooring and accessories for floors and stairs.
SECTION PART 1 - GENERAL 1.1 SUMMARY A. This section includes pre-finished Higuera Hardwoods bamboo flooring and accessories for floors and stairs. 1.2 RELATED DOCUMENTS A. Related Sections include the
More informationRESILIENT ECO NATURALS, DEFIANT, AND PHOTOLUMINESCENT STAIR TREADS
THIS DOCUMENT IS INTENDED AS A SUGGESTED GUIDE FOR CREATING, MODIFYING, OR EDITING YOUR CSI FORMATTED 3-PART ARCHITECTURAL GUIDE SPECIFICATIONS. JOHNSONITE WILL NOT BE LIABLE FOR ANY DAMAGES ARISING OUT
More informationCARPET CARPET
09680 - CARPET 09680-1 PART ONE: GENERAL 1.1 Description CARPET 1.1.1 Work of this Section, as shown or specified, shall be provided by the Interior Contractor and shall be in accordance with the requirements
More informationA. Drawings and general provisions of the Contract apply to this Section including all documentation provided in RFP#
SECTION 096466 - WOOD ATHLETIC FLOORING PART 1 - GENERAL 1.1 RELATED DOCUMENTS A. Drawings and general provisions of the Contract apply to this Section including all documentation provided in. 1.2 SUMMARY
More informationChilewich 3-Part CSI Specifications 04 Format 01/17
SECTION 09 68 13 - MODULAR TILE FLOORING TIPS: To view non-printing Editor's Notes that provide guidance for editing, click on Masterworks/Single-File Formatting/Toggle/Editor's Notes. To read detailed
More informationRESILIENT FLOORING: Select Step Wood
160 S. Industrial Blvd Calhoun, GA 30701 Section 096519 RESILIENT FLOORING: Select Step Wood This document is intended as a suggested guide for editing your architectural guide specification. Mohawk Group
More informationALBUQUERQUE PUBLIC SCHOOLS Department of Facility Design & Construction Department of Maintenance & Operations MODULAR CARPET TILE STANDARDS
ALBUQUERQUE PUBLIC SCHOOLS Department of Facility Design & Construction Department of Maintenance & Operations MODULAR CARPET TILE STANDARDS Karen Alarid John Dufay Mary Nulk Adopted August 22, 2014 SECTION
More information1.2 References: American Association of Textile Chemists and Colorists (AATCC)
SHEET CARPETING GENERAL INFORMATION 1.1 Sheet (broadloom) carpet, vinyl base and accessories. 1.2 References: American Association of Textile Chemists and Colorists (AATCC) a. AATTC 16 Test Method 16 b.
More information1. Division 09 Section "Rough Carpentry."
GREENSPOINT AND LAUDER RD. EC/PRE-KlK PAGE 1 SECTION 096400 - WOOD FLOORING PART 1 - GENERAL 1.1 RELATED DOCUMENTS A. Drawings and general provisions of the Contract, including General and Supplementary
More informationSECTION MOISTURE RESISTANT/WATER-PROOF FLOORING ADHESIVE FOR CONCRETE SLABS
SECTION 09699 MOISTURE RESISTANT/WATER-PROOF FLOORING ADHESIVE FOR CONCRETE SLABS PART 1 GENERAL 1.1 SECTION INCLUDES A. Testing and application of systems for the reduction of moisture resistant or water-proof
More informationSTUDIO 2LR ARCHITECTURE + INTERIORS
STUDIO 2LR ARCHITECTURE + INTERIORS 6University of South Carolina, School of Medicine USC SOM #28 Sim II 6311 Garners Ferry Road, Columbia, South Carolina State Project Number: H27-Z325 September 27, 2018
More informationSECTION RESILIENT SHEET FLOORING
PART 1 - GENERAL 1.1 DESCRIPTION SECTION 09 65 16 A. This Section includes resilient sheet flooring. 1. Use this section only for NCA projects. 2. Delete between // ---- // if not applicable to project.
More informationPowerdek Fleck. SECTION Resilient Athletic Flooring
SECTION 09622 Resilient Athletic Flooring PART 1: GENERAL 1.0 SUMMARY 1.0.1 Work Included A. Prefabricated Rubber Sports Flooring B. Adhesive and accessories required for installation and maintenance 1.0.2
More informationSECTION RESILIENT SHEET FLOORING
SECTION 09 65 16 RESILIENT SHEET FLOORING SPEC WRITER NOTE: Delete text between // // not applicable to project. Edit remaining text to suit project. PART 1 - GENERAL 1.1 SUMMARY A. Section Includes: 1.
More informationControl XT SECTION Resilient Athletic Flooring
Control XT SECTION 09 65 22 Resilient Athletic Flooring PART 1: GENERAL 1.0 SUMMARY 1.0.1 Work Included A. Rubber sports flooring B. Adhesive and accessories required for installation and maintenance.
More informationSECTION RESILIENT TILE FLOORING
PART 1 - GENERAL 1.1 DESCRIPTION SECTION 09 65 19 1. Use this section only for NCA projects. 2. Delete between // // if not applicable to project. Also delete any other item or paragraph not applicable
More informationRESILIENT CORK TILE 3 PART SPECIFICATION #Z 624
3 PART SPECIFICATION #Z 624 THE FOLLOWING DOCUMENT IS A GUIDE FOR CREATING YOUR CSI FORMATTED 3-PART ARCHITECTURAL GUIDE SPECIFICATIONS. ZANDUR ACCEPTS NO LIABILITY FOR ANY DAMAGES RESULTING FROM THE USE
More informationSuggested Specification for Tri-Patch Versatile Concrete Patching Compound
Suggested Specification for Tri-Patch Versatile Concrete Patching Compound SURFACE PREPARATION for Interior and Exterior Floor-Covering Installations. (Vinyl Composition Tiles, Sheet Vinyl, Rubber, Indoor
More informationRESILIENT RUBBER STAIR TREADS WITH RISER
THIS DOCUMENT IS INTENDED AS A SUGGESTED GUIDE FOR CREATING, MODIFYING, OR EDITING YOUR CSI FORMATTED 3-PART ARCHITECTURAL GUIDE SPECIFICATIONS. JOHNSONITE WILL NOT BE LIABLE FOR ANY DAMAGES ARISING OUT
More informationINSTALLATION BASICS FOR AFFIXX Tile TModula
BASICS Bentley Mills has adopted the Carpet and Rug Institute s (CRI) 104 as a basic minimum industry guideline for the installation of both broadloom and modular carpet. Please note; the installation
More informationSECTION RESILIENT FLOORING
PART 1 GENERAL 1.1 SECTION INCLUDES SECTION 09 65 00 RESILIENT FLOORING A. Resilient sheet and tile flooring B. Resilient base C. Resilient stair nosing, treads, risers and skirting 1.2 REFERENCES A. ASTM
More informationSECTION TERRAZZO FLOOR TILE
PART 1 - GENERAL 1.1 DESCRIPTION SECTION 09 66 16 SPEC WRITER NOTES: 1. Use this section only for NCA projects. 2. Delete between // ----- // if not applicable to project. Also delete any other item or
More informationSECTION SUBSURFACE PREPARATION FOR FLOOR FINISHES
PART 1 - GENERAL 1.1 DESCRIPTION SECTION 09 05 16 SUBSURFACE PREPARATION FOR FLOOR FINISHES SPEC WRITER NOTES: 1. Delete between // // if not applicable to project. Also delete any other item or paragraph
More informationINSTALLATION BASICS FOR TUFTED BROADLOOM BACKING
BASICS Bentley has adopted the Carpet and Rug Institute s (CRI) Installation Standard, as a basic minimum industry guideline for the installation of Bentley carpet. Please note, however, that the instructions
More information1.2 Reference Standard: NOFMA - National Oak Flooring Manufacturers Association Grading Standards.
WOOD FLOORING GENERAL INFORMATION 1.1 This section applies to factory finished wood strip flooring. 1.2 Reference Standard: NOFMA - National Oak Flooring Manufacturers Association Grading Standards. 1.3
More informationECORE Athletic Stacked Ultimate Turf Rolls GUIDE SPECIFICATIONS ECORE International
MARCH 03 rd, 2015-This document is provided solely as a convenience for spec writers in the drafting process. ECORE International will not be held responsible for the use or alteration of any information
More informationUnion County Vocational - Technical Schools Scotch Plains, New Jersey
SECTION 096623 - RESINOUS MATRIX TERRAZZO FLOORING PART 1 - GENERAL 1.1 RELATED DOCUMENTS A. Drawings and general provisions of the Contract, including General and Supplementary Conditions and Division
More informationSECTION EPOXY RESIN FLOORING WITH INTEGRAL COVE BASE
PART 1 GENERAL 1.01 SUMMARY SECTION 09730 EPOXY RESIN FLOORING WITH INTEGRAL COVE BASE A. Related Sections: 1. 03300 - Cast-in-Place Concrete. 2. 09000 - Patching and Finishes. 3. 09900 - Painting. 4.
More informationDESIGN GUIDELINES AND TECHNICAL STANDARDS
DESIGN GUIDELINES AND TECHNICAL STANDARDS Date of Issuance: January 1, 2014 DIVISION 9 FINISHES SECTION 09 2900 GYPSUM BOARD 1. General: This section outlines the requirements for gypsum board systems.
More informationSECTION EPOXY RESIN FLOORING WITH INTEGRAL COVE BASE
PART 1 GENERAL 1.01 SUMMARY SECTION 09730 EPOXY RESIN FLOORING WITH INTEGRAL COVE BASE A. Related Sections: 1. 03300 - Cast-in-Place Concrete. 2. 09000 - Patching and Finishes. 3. 09900 - Painting. 4.
More informationSECTION ARCHITECTURAL SPECIFICATIONS FOR INDOOR WOOD ATHLETIC FLOORING
PART 1 GENERAL 1.1 SECTION INCLUDES A. Supply and installation of MFMA Maple Wood Flooring System B. Application of the game lines C. References for the correct construction and preparation of concrete
More informationFlexLok Adhesive Tabs for Carpet Tile
FlexLok Adhesive Tabs for Carpet Tile INSTALLATION EcoFlex ICT EcoFlex NXT 160 South Industrial Blvd. Calhoun, GA. 30701 MohawkGroup.com Technical Services Department 508 East Morris St. Dalton, GA 30721
More informationStrataWorx Tile. Installation Guidelines 1. CONDITION YOUR SITE AND TEST 2. PREPARE THE FLOOR
Notice: For best results, review the following guidelines prior to installation. Shaw will not be responsible for improper installation and failure to follow these guidelines may result in limiting warranty
More informationINSTALLATION BASICS FOR TUFTED BROADLOOM BACKING
Basics Bentley Mills has adopted the Carpet and Rug Institute s Standard for Installation of Commercial Carpet, (CRI 104) (www.carpet-rug.org) as the basic minimum industry guideline for the installation
More informationKOSTER AMERICAN CORPORATION
Section 09699 PART 1 GENERAL Water Vapor Emission Control Systems 1.1 RELATED DOCUMENTS A. Drawings, documents, and general provisions of the Contract, including, but not necessarily limited to, General
More informationB. Related Sections: 1. Division 07 Section "Joint Sealants" for sealing of expansion, contraction, control, and isolation joints in tile surfaces.
SECTION 093000 - CERAMIC TILE PART 1 - GENERAL 1.1 RELATED DOCUMENTS A. Drawings and general provisions of the Contract, including General and Supplementary Conditions and Division 01 Specification Sections,
More informationModular Carpet Tile Installation Instructions
Modular Carpet Tile Installation Instructions UltraSet Vinyl Back 160 South Industrial Blvd. Calhoun, GA. 30701 Dalton, GA 30721 www.mohawkflooring.com Technical Services Department 508 East Morris St.
More informationSECTION WOOD ATHLETIC FLOORING
SECTION 096466 WOOD ATHLETIC FLOORING PART 1 - GENERAL 1.1 SUMMARY A. Section Includes: 1. Wood sports-floor assemblies. B. Related Sections: 1. Section 011100 Summary of Work, for Contract 1-G Scope of
More informationOverall Thickness Wear Layer Thickness. Factory in. (2.0 mm) in. (2.0 mm) Diamond 10 Technology coatingcultured
PRODUCT SPEC PAGE ColorArt Medintech l Medintone Homogeneous Sheet Flooring Product Information Construction Product Line International Product Specifications Overall Thickness Wear Layer Thickness Factory
More informationIVC US. Light Commercial Installation Guide - Sheet Vinyl. Leading the Way
IVC US Light Commercial Installation Guide - Sheet Vinyl Leading the Way v. 5/2013 IVC US Light Commercial Installation Guide - Sheet Vinyl Flooring IVC US recommends the following guidelines for preparation
More informationSECTION PREFINISHED FSC MAPLE FLOORING. This is a template: edit this specification carefully to suit specific project requirements.
SECTION 09 64 29 PREFINISHED FSC MAPLE FLOORING General notes to the specifier: This is a template: edit this specification carefully to suit specific project requirements. Following guidelines established
More informationSECTION RESILIENT STAIR TREADS CSI 3-PART SHORT-FORM GUIDE SPECIFICATION USE FOR OUTLINE OR DD SPECIFICATION ISSUES. EDIT TO SUIT PROJECT
SECTION 09 6 13 RESILIENT STAIR TREADS CSI 3-PART SHORT-FORM GUIDE SPECIFICATION USE FOR OUTLINE OR DD SPECIFICATION ISSUES. PART 1 - GENERAL 1.1 SUMMARY EDIT TO SUIT PROJECT A. Work of this Section consists
More informationARDEX GUIDE SPECIFICATION ARDEX GPS GENERAL PATCH & SKIMCOAT Trowelable underlayment
ARDEX GUIDE SPECIFICATION ARDEX GPS GENERAL PATCH & SKIMCOAT Trowelable underlayment SECTION 03 01 30 Maintenance of Cast-In-Place Concrete PART 1 - GENERAL 1.1 RELATED DOCUMENTS A. Drawings, general provisions
More informationSection SECTION RESINOUS FLOORING PART 1 - GENERAL 1.1 RELATED DOCUMENTS
SECTION 096723 - RESINOUS FLOORING PART 1 - GENERAL 1.1 RELATED DOCUMENTS A. Drawings and general provisions of the Contract, including General and Supplementary Conditions and Division 01 Specification
More informationSection Performance Floor Asemblies (Also Dance Floor Assemblies)
Sample Specifications for kiwifloor Studio System Section 09646 Performance Floor Asemblies (Also Dance Floor Assemblies) PART 1 GENERAL 1.1 GENERAL A. Work of this Section, as shown or specified, shall
More informationPrimary Effect Collection
TM Primary Effect Collection Pattern Amity, Compound, Perspective, Guild, Surface Rapport Stitch Pattern Perspective Brick Ashlar Cover: Pattern Perspective, Barrali Surface Stitch Brick Ashlar Pattern
More informationEXPANKO RESILIENT FLOORING PRE-INSTALLATION GUIDELINES
TECHNICAL SUPPORT 800.345.6202 These guidelines apply to the installation of all Expanko Resilient Flooring products. For instructions on the installation of specific Expanko products, please refer to
More informationNote: Delete any section below not relevant to this project; add others as required.
Part 1 General 1.1 section includes A. WriteLite B. Related Sections Note: Delete any section below not relevant to this project; add others as required. 1. Section 06 20 00 Finish Carpentry 2. Section
More informationARDEX GUIDE SPECIFICATION ARDEX MRF Moisture-Resistant, Rapid-Drying, Skimcoat Patching Underlayment
ARDEX GUIDE SPECIFICATION ARDEX MRF Moisture-Resistant, Rapid-Drying, Skimcoat Patching Underlayment SECTION 03 01 30 Maintenance of Cast-In-Place Concrete PART 1 - GENERAL 1.1 RELATED DOCUMENTS A. Drawings,
More informationSECTION EPOXY RESIN FLOORING WITH INTEGRAL COVE BASE
SECTION 09730 EPOXY RESIN FLOORING WITH INTEGRAL COVE BASE PART 1 GENERAL 1.01 SUMMARY A. Related Sections: 1. 03300 - Cast-in-Place Concrete. 2. 09000 - Patching and Finishes. 3. 09900 - Painting. 4.
More informationArchitectural Guide Specification CSI/CSC SectionFormat [3-part] CSI PageFormat. Tel Fax
Architectural Guide Specification CSI/CSC SectionFormat [3-part] CSI PageFormat Tel. 800.522.9166 Fax 414.944.0550 This is a manufacturer specific proprietary product specification using the proprietary
More informationInstallation Instructions for Hercules Rib 52
Page 1 of 5 Installation Instructions These instructions supersede any verbal or written instructions from connexus representatives, and must be followed in order for the warranty to be in effect. Delivery
More informationSECTION RESILIENT BASE AND ACCESSORIES
SECTION 09 65 13 RESILIENT BASE AND ACCESSORIES SPEC WRITER NOTE: Delete text between // // not applicable to project. Edit remaining text to suit project. PART 1 - GENERAL 1.1 SUMMARY A. Section Includes:
More information