Developing together. Building with each other. We create chemistry for advanced construction. Construction Materials

Transcription

1 Developing together. Building with each other. We create chemistry for advanced construction. Construction Materials

2 BASF Raw Materials and Formulation Know-How for Construction Materials To achieve groundbreaking formulations providing outstanding workability and physical properties, your system needs advanced raw materials. The properties of construction materials such as dry mortars or mastic systems are influenced by the quality of local raw materials. Therefore, interactions between organic and inorganic binders, fillers and a range of chemical additives need to be controlled to ensure the best performance of the system. We create chemistry for advanced formulations: organic binders such as acrylic dispersions and powders, as well as a broad variety of powder and liquid additives which enable you to formulate innovative products. Our application-focused technical experts in our laboratories support you in optimizing your formulations and choosing the right raw materials. Additionally, we provide you with the right solution for your specific raw materials and special local requirements. We especially support you in: Waterproofing Applications Waterproofing membranes beneath tiles Waterproofing membranes for concrete protection Flexible Flat Roof Coatings Primers Repair Systems and Infrastructure Flowable Systems Self-levelling underlayments Cementitious and calcium sulphate based screeds Non-shrink grouts Non-sag Applications Mastic and cement-based ceramic tile adhesives Exterior insulation and finishing systems (EIFS/ETICS Plasters and renders

3 Creating chemistry for more sustainable Construction Materials To drive sustainable development, we reviewed our entire portfolio under sustainability aspects by using the standardized Sustainable Solution Steering Method*. Looking at economic, environmental and social needs, we have identified key issues along the entire value chain for the Construction Materials segment. On this basis, we are able to assess the sustainability contribution of each product in its specific application. Material Efficiency Durability Energy Saving Fast Construction Easy Application Low VOC Renewables Drinking Water Approval * Further information at

4 4 CONSTRUCTION MATERIALS Waterproofing Applications Waterproofing Applications Product Chemistry / Appearance / Glass Transition Temperature (T g Applications / Type of Formulation Properties Sustainability contribution* Beneath tiles Concrete protection Wet room coating (mastic Flexible 1-Component Waterproofing membrane Flexible 2-Component Waterproofing membrane 2-Component basement protection 2-Component water storage protection 2-Component concrete protection systems Dispersions Acronal 5028 A-Dispersion/-55 C Acronal 5041 S/A-Dispersion/5 C Acronal 5311 S/A-Dispersion/-30 C Acronal 5400 S/A-Dispersion/-8 C Acronal 5442 S/A-Dispersion/-15 C Acronal S 533 S/A-Dispersion/5 C Styrofan D 422 S/B-Dispersion/-7 C Very good crack-bridging properties down to -20 C, suitable for formulations complying with BFR XIV (drinking water approval for Germany Good adhesion to different substrates, fast drying, good water resistance, excellent water-vapour barrier properties Very good crack bridging properties down to -20 C, no ammonia release in cementitious applications, suitable for formulations complying with BFR XIV (drinking water approval for Germany Flexible, no use of ammonia and plasticizers, suitable for formulations complying with BFR XIV (drinking water approval for Germany Self-crosslinking, outstanding crack-bridging properties, even at low temperatures down to -20 C, no ammonia release in cementitious applications, suitable for formulations complying with BFR XIV (drinking water approval for Germany Low emission, high pigment binding capacity, multi-purpose binder Outstanding water-vapour barrier properties, high pigment binding capacity Redispersible s Acronal P 5033 S/A /-15 C Self-crosslinking, very good crack-bridging properties, no use of plasticizer, no release of ammonia in cementitious applications Acronal S 430 P S/A /-15 C Flexible, good crack-bridging properties, no use of plasticizers Rheology Modifiying Agents Rheovis AS 1130 ASE-Thickener/Liquid Rheovis HS 1169 Rheovis HS 1980 HASE-Thickener/Liquid HASE-Thickener/ Efficient ASE, low shear thickener, easy handling, dosing and incorporation, precise viscosity control possible, suitable for formulations complying with BFR XIV (drinking water approval for Germany High efficiency, thixotropic workability, low-shear thickening, shear thinning viscosity profile High efficiency, thixotropic workability, low-shear thickening, shear thinning viscosity profile Rheovis PU 1270 PU Efficient low/mid shear thickener Rheovis PU 1280 PU Highly efficient low mid shear thickener, easy dosing and incorporation, precise viscosity control possible Defoamers Foamaster NO 2306 Native-oil based defoamer Universal for water-based formulations, effectively removes micro-foam Foamaster WO 2310 White-oil defoamer Good defoaming, suitable for formulations complying with BFR XIV (drinking water approval for Germany FoamStar ED 2522 Silicone emulsion/liquid Universal for water-based formulations, excellent storage stability, easy to incorporate FoamStar PB 2706 Polyether derivate of fatty Universal for water-based formulations, easy to incorporate acid/liquid FoamStar SI 2210 Modified polydimethylsiloxane/liquid Strong spontaneous defoaming effect FoamStar SI 2213 Vinapor DF 2922 F (former FoamStar PB 2922 Vinapor DF 9010 F Silicone/polymer based mix/liquid Silicone free defoamer blend/ Fatty alcohol alkoxylates and polysiloxanes on inorganic carrier/ Universal for water-based formulations, excellent storage stability, easy to incorporate Easy dosing, suitable for formulations complying with BFR XIV (drinking water approval for Germany Excellent defoaming and deaerating properties, easy dosing Dispersing Agents Dispex AA 4135 Dispex CX 4320 Sodium salt of polyacrylic acid/liquid Sodium salt of carboxylic acid copolymer/liquid Excellent dispersing efficiency for inorganic fillers and pigments, broad application range Very good dispersing efficiency for inorganic fillers and pigments, low impact on water resistance, broad application range

5 CONSTRUCTION MATERIALS Flexible Flat Roof Coatings 5 Flexible Flat Roof Coatings Product Chemistry / Appearance / Glass Transition Temperature (T g Applications / Type of Formulation Properties Sustainability contribution* Flexible flat roof coatings basic requirements Flexible flat roof coatings for ETAG 005 requirements Dispersions Acronal 6715 S/A-Dispersion/22 C Acronal ECO 6716 S/A-Dispersion/22 C Acronal PLUS 6257 A-Dispersion/-28 C Acronal S 562 S/A-Dispersion/-6 C Solution for basic requirements, film-forming agent required Solution for basic requirements, film-forming agent required Fast drying, double crosslinked, outstanding crack-bridging properties, very good dirt pick-up resistance, good adhesion to critical substrates Solution for medium requirements, good dirt pick-up resistance Rheology Modifying Agents Rheovis AS 1130 ASE-Thickener/Liquid Efficient ASE, low shear thickener, easy handling, dosing and incorporation, precise viscosity control possible, suitable for formulations complying with BFR XIV (drinking water approval for Germany Rheovis PU 1270 PU Efficient low/mid shear thickener Rheovis PU 1280 PU Highly efficient low/mid shear thickener, easy dosing and incorporation, precise viscosity control possible Film Forming Agents Loxanol CA 5308 Dicarbonic acid-diisobutyl ester B.p. >260 C, very effective reduction of the MFFT, no labeling in accordance with EU guideline Dispersing Agents Dispex AA 4135 Dispex CX 4231 Dispex CX 4320 Sodium salt of polyacrylic acid/liquid Ammonium salt of modifed polycarboxylate/liquid Sodium salt of carboxylic acid copolymer/liquid Excellent dispersing efficiency for inorganic fillers and pigments, broad application range Reduces water uptake, pronounced hydrophobic character Very good dispersing efficiency for inorganic fillers and pigments, low impact on water resistance, broad application range Defoamers FoamStar PB 2706 Polyether derivate of fatty acid/liquid Universal for water-based formulations, easy to incorporate FoamStar SI 2210 Modified polydimethylsiloxane/liquid Strong spontaneous defoaming effect FoamStar SI 2213 Silicone/polymer based mix/ Liquid Universal for water-based formulations, excellent storage stability, easy to incorporate = recommended = suitable All listed dispersions, redispersible powders, and additives for Waterproofing Applications and Flexible Flat Roof Coatings are non-apeo products. Material Efficiency Durability Fast Construction Easy Application Energy Saving Low VOC Renewables Drinking Water Approval * The respective product has been evaluated with BASF s Sustainable Solution Steering Method and provides substantial sustainability contribution in the specific application.

6 6 CONSTRUCTION MATERIALS Primers Primers Product Chemistry / Appearance / Glass Transition Temperature (T g Applications / Type of Formulation Properties Sustainability contribution* Moisture barrier Water vapour barrier Resistance to salt efflorescence Deep penetrating primer Primer to strengthen chalky, absorbent surfaces Dust binding Adhesion promotor on critical substrates Stain blocking Dispersions Acronal 5041 S/A-Dispersion/5 C Acronal 5555 S/A-Dispersion/ MFFT <2 C Acronal A 508 A-Dispersion/3 C Low emission and high wet stability, excellent water-vapour barrier properties, fast drying without coalescent High moisture barrier properties, excellent freeze/thaw stability, contains renewables Exceptional penetration and wetting of substrates Acronal A 684 A-Dispersion/21 C Excellent wet adhesion Acronal ECO 6258 S/A-Dispersion /10 C Outstanding saponification and alkaline resistance, excellent resistance to solutions of inorganic salts Acronal PLUS 6727 S/A-Dispersion /10 C Excellent tannin and nicotine blocking properties Acronal S 533 S/A-Dispersion/5 C Low emission, high pigment binding capacity, multi-purpose binder Acronal S 790 S/A-Dispersion/22 C High pigment binding capacity, multi-purpose binder Acronal S 813 S/A-Dispersion/28 C Outstanding water resistance and wet adhesion Joncryl 8284 A-Dispersion /7 C Excellent blocking properties Styrofan 5517 S/B-Dispersion/5 C High moisture barrier properties, high pigment binding capacity Rheology Modifying Agents Rheovis AS 1130 ASE-Thickener/Liquid Efficient ASE, low shear thickener, easy handling, dosing and incorporation, precise viscosity control possible, suitable for formulations complying with BFR XIV (drinking water approval for Germany Rheovis HS 1162 HASE-Thickener/Liquid Very high dosing efficiency Rheovis PU 1280 PU Highly efficient low/mid shear thickener, easy dosing and incorporation, precise viscosity control possible Defoamers Foamaster NO 2306 Native-oil based defoamer Universal for water-based formulations, effectively removes micro-foam FoamStar PB 2706 Polyether derivate of fatty acid/liquid Universal for water-based formulations, easy to incorporate FoamStar SI 2210 Modified polydimethylsiloxane/liquid Strong spontaneous defoaming effect Dispersing Agents Dispex AA 4135 Sodium salt of polyacrylic acid/liquid Excellent dispersing efficiency for inorganic fillers and pigments, broad application range Dispex CX 4320 Sodium salt of carboxylic acid copolymer/liquid Very good dispersing efficiency for inorganic fillers and pigments, low impact on water resistance, broad application range Film-Forming Agents Loxanol CA 5308 Dicarbonic acid-diisobutyl ester B.p. >260 C, very effective reduction of the MFFT, no labeling in accordance with EU guideline = recommended = suitable MFFT = minimum film forming temperature All listed dispersions and additives for Primers are non-apeo products. Material Efficiency Durability Fast Construction Low VOC Renewables * The respective product has been evaluated with BASF s Sustainable Solution Steering Method and provides substantial sustainability contribution in the specific application.

7 CONSTRUCTION MATERIALS Repair Systems and Infrastructure 7 Repair Systems and Infrastructure Product Chemistry / Appearance / Glass Transition Temperature (T g Applications / Type of Formulation Properties Sustainability contribution* Reinforcement Protection Repair Mortar PCC Repair Mortar CC Smoothening Compounds/ Fine Filler Mortar Bonding Emulsion Dispersions Acronal 5018 S/A-Dispersion/18 C High bonding strength; high wetting properties Styrofan D 623 S/B-Dispersion/14 C Highly flexible applications Styrofan D 820 S/B-Dispersion/24 C High strength application Redispersible s Acronal S 734 P S/A-/20 C Horizontal/Floor Applications; defoamed Acronal S 735 P S/A-/20 C Vertical/Wall Applications Superplasticizers/Wetting Agents Melflux 4930 F Melment F 10 Ether/ Waterreducer; Higher System Strength; Improved mixing Wetting Aid; Improved Bonding; Improved mixing Rheology Modifying Agents Rheovis HS 1980 Synthetical Polymer/ Thixotropic thickening of system Starvis S 3911 F Waterswellable Polymer Internal curing and reduction of crack formation; Improved freeze/thaw resistance and durabilty; high sag resistance Starvis S 5514 F Waterswellable Polymer Internal curing and reduction of crack formation; Improved freeze/thaw resistance and durabilty Starvis T 50 F Synthetical Polymer/ Strong thickening of system Starvis T 51 F Synthetical Polymer/ Strong thickening of system with improved mixing properties Defoamers FoamStar PB 2706 Vinapor DF 2922 F (former FoamStar PB 2922 Vinapor DF 2941 F (former FoamStar PB 2941 Vinapor DF 9010 F Liquid Fatty Acid Silicone free defoamer blend/ Mineral oil on inorganic carrier/ Fatty alcohol alkoxylates and polysiloxanes on inorganic carrier/ Universal for water-based formulations, easy to incorporate Excellent defoaming, easy dosing, suitable for formulations complying with BFR XIV (drinking water approval for Germany General purpose defoamer, RAL-UZ 113 conform Excellent defoaming and deaerating properties, easy dosing Hydration Control Additives HyCon S 3200 F HyCon S 6100 F HyCon S 7100 L C-S-H seeding/ C-S-H seeding/ Aequeous suspension of C-S-H seeds/liquid Acceleration of systems based on OPC and increase of early strength development by C-S-H seeding technology, slight dispersing effect Acceleration of systems based on OPC and increase of early strength development by C-S-H seeding technology, higher viscosity for sag resistance Acceleration of systems based on OPC and increase of early strength development by C-S-H seeding technology = recommended = suitable All listed dispersions, redispersible powders and defoamers for Repair Systems and Infrastructure are non-apeo products. Material Efficiency Durability Fast Construction Low VOC Drinking Water Approval * The respective product has been evaluated with BASF s Sustainable Solution Steering Method and provides substantial sustainability contribution in the specific application.

8 8 CONSTRUCTION MATERIALS Flowable Systems Flowable Systems Product Chemistry / Appearance Applications / Type of Formulation Properties Sustainability contribution* Cementitious mortars Calcium sulphate based mortars Hemihydrate based (CaSO 4 1/2 H 2 O Anhydrite based (CaSO 4 Self-levelling underlayments Self-levelling overlayments/ Industrial floors Conventional floor screeds (non flowable Non-Shrink grouts/ Machinery grouts Self-levelling underlayments (natural anhydrite (synthetic anhydrite (thermal anhydrite/fgd anhydrite Superplasticizers Melflux 1022 F Melflux 2641 F Melflux 2651 F Melflux 4930 F Melflux 5581 F Melflux 6681 F Melflux AP 101 F Melflux BF 11 F Ether/ Ether/ Ether/ Ether/ Ether/ Ether/ Ether/ Ether/ Optimised for gypsum based flowing floor screeds, low VOC (useful for EMICODE EC-1 Long flow retention (open time, high early strength development, German drinking water approval (DVGW W270 & W347 Allround product, high early strength development, German drinking water approval (DVGW W270 & W347 Fast dispersing effect, benefit for machine application (short mixing, French drinking water approval (compliance with positive list No. 2000/232, Apr. 27, 2000 High early strength development, very useful for hemihydrate based SLUs Very fast dispersing effect, benefit for machine application (very short mixing Without defoamer, very useful for cementitious grouts with low viscosity Very good slump retainer without retardation of cement hydration Melflux PP 100 F Melflux SELECT 5691 F Melflux SELECT 5731 F Melment F 10 Melment F 10 G Melment F 10 M Melment F 15 Melment F 15 G Melment F 17 G Melment F 245 Melment F 4000 Ether/ Ether/ Ether/ Strong retardation, prolonged workability, preferrably for fast setting cements Optimized for binary binder systems (HH-rich/OPC Optimized for calcium sulphoaluminate cement (CSA based systems Allround product Optimised for gypsum Enhanced dispersing effect (dosage efficiency & water reduction Low formaldehyde content (reduced emission Optimised for gypsum long open time, low formaldehyde content Optimised for gypsum, lower formaldehyde content Strongest dispersing effect (dosage efficiency and water reduction Enhanced dispersing effect (dosage efficiency & water reduction, German drinking water approval (DVGW W270 & W347 Redispersible s Acronal S 734 P S/A-/ Tg = 20 C Defoamed redispersible powder with plasticizing effect = recommended = suitable All listed redispersible powders and defoamers for Flowable Systems are non-apeo products.

9 CONSTRUCTION MATERIALS Flowable Systems 9 Product Chemistry / Appearance Applications / Type of Formulation Properties Sustainability contribution* Cementitious mortars Calcium sulphate based mortars Hemihydrate based (CaSO 4 1/2 H 2 O Anhydrite based (CaSO 4 Self-levelling underlayments Self-levelling overlayments/ Industrial floors Conventional floor screeds (non flowable Non-Shrink grouts/ Machinery grouts Self-levelling underlayments (natural anhydrite (synthetic anhydrite (thermal anhydrite/fgd anhydrite Stabilizers Starvis 3003 F Starvis 3040 F Starvis 3050 F Starvis 3070 F High molecuar weight polymer/ High molecuar weight polymer/ High molecuar weight polymer/ High molecuar weight polymer/ Viscosity-enhancing Biopolymers KELCO-CRETE DG Diutan Gum/ (coarse grade KELCO-CRETE DG-F Diutan Gum/ (fine grade Defoamers Vinapor DF 2922 F (former FoamStar PB 2922 Vinapor DF 2938 F (former FoamStar PB 2938 Vinapor DF 2941 F (former FoamStar PB 2941 Vinapor DF 9010 F Silicone free defoamer blend/ Polyether derivative of fatty acid on inert carrier/ Mineral oil on inorganic carrier / Fatty alcohol alkoxylates and polysiloxanes on inorganic carrier / Additives for conventional cementitious floor screeds Melvis C 4632 F Wetting Agent/ Melvis C 1143 F Water Reducing Agent/ Melvis C 4212 F Water Reducing Agent/ Melvis C 9100 F Water Reducing Agent/ Hydration Control Additives HyCon R 3100 F Modified polymer/ HyCon R 7200 F Modified polymer/ HyCon S 3200 F HyCon S 7100 L C-S-H seeding/ Aequeous suspension of C-S-H seeds/ Liquid Prevents bleeding and segregation, optimised for thin layer systems Prevents bleeding and segregation, optimised for thick layer systems Prevents bleeding and segregation, optimised for medium and thick layer systems Prevents bleeding and segregation, optimised for thin layer systems Prevents sedimentation of mineral particles, optimised for thick layer systems Prevents sedimentation of mineral particles, optimised for thick layer systems General purpose defoamer, RAL-UZ 113 conform, suitable for formulations complying with BFR XIV (drinking water approval for Germany General purpose defoamer General purpose defoamer, RAL-UZ 113 conform Very efficient defoaming effect, prevents air bubbles, provides smooth surface, low VOC (useful for EMICODE EC-1, RAL-UZ 113 conform Improves finishing process with trowel (smooth surface Water reduction, shrinkage reduction, faster drying Strong water reduction, strong shrinkage reduction, faster drying Very strong water reduction, strong shrinkage reduction, very fast drying Selective retardation of hemihydrate in binary (OPC-rich/HH systems Retardation of setting of hemihydrate systems and binary (HH-rich/ OPC systems Acceleration of systems based on OPC and increase of early strength development by C-S-H seeding technology Acceleration of systems based on OPC and increase of early strength development by C-S-H seeding technology Material Efficiency Fast Construction Easy Application Low VOC Drinking Water Approval * The respective product has been evaluated with BASF s Sustainable Solution Steering Method and provides substantial sustainability contribution in the specific application.

10 10 CONSTRUCTION MATERIALS Non-sag Applications Non-sag Applications Product Chemistry / Appearance / Glass Transition Temperature (T g Applications / Type of Formulation Properties Sustainability contribution* Ceramic Tile Adhesives Cementitious MASTIC/RTU 1C Cem 2C Cem D2-CTA D1-CTA Tile Grouts EIFS/ETICS Cementitous Mastic Plasters & Renders Cementitious Gypsum based Skim coats/monocouche Systems Masonry Mortars Dispersions Acronal 5018 S/A-Dispersion/18 C Slightly fluidizing, for C2S2 application Acronal 5041 S/A-Dispersion/5 C Low emission and high wet stability, fast drying without coalescent Acronal 5400 S/A-Dispersion/-8 C Flexible, no use of ammonia and plasticizers, suitable for formulations complying with BFR XIV (drinking water approval for Germany Acronal 5555 S/A-Dispersion/ MFFT <2 C Acronal S 533 S/A-Dispersion/5 C Enhanced open time, excellent shear adhesion strength, includes renewable raw materials Low emission, high pigment binding capacity, multi-purpose binder Acronal S 790 S/A-Dispersion/22 C Multi purpose product Acronal S 813 S/A-Dispersion/28 C Outstanding wet stability Redispersible s Acronal S 430 P S/A-/-15 C Acronal S 735 P S/A-/20 C Wetting Agents/Water Reducers Melflux 5581 F Ether/ Melment F 10 Melvis WA GYP 1000 F Vinapor WA 3918 F (former Hydropalat WE 3918 Synthetical Block- Copolymer Oleo-alkyleneoxideblock copolymer, coated on silica For highly flexible S2-types For highly flexible applications like C2S2 tile adhesives Improved mixing; Optimised for gypsum based systems Improved mixing High wetting properties without sag-loss Excellent dispersing and wetting properties; Marked viscosity reduction; Increases color development and stability in pigmented systems Workability Agents Starvis SE 25 F Starch Ether/ Stickness reduction; Little influence on consistency/ no retardation Rheology Modifying Agents Starvis 308 F Synthetical Polymer/ Starvis S 3911 F Synthetical Polymer/ Starvis S 5514 F Starvis SE 35 F Starvis SE 45 F Starvis RS 421/01 F Starvis T 50 F Starvis T 51 F Synthetical Polymer/ Starch Ether/ Starch Ether/ Synthetical Polymer/ Synthetical Polymer/ Synthetical Polymer/ Rheology improvement, water retention, no retardation Swellable polymer for open time and sag resistance improvement, workability improvement Swellable polymer for water storage and improved pore structure Sag resistance introduction, workability approvement Efficient sag resistance introduction, low retardation Efficient thickening compound for basic CTA; Open time and sag resistance improvement Very efficient sag resistance introduction Very efficient sag resistance introduction, quick and easy mixing

11 CONSTRUCTION MATERIALS Non-sag Applications 11 Product Chemistry / Appearance / Glass Transition Temperature (T g Applications / Type of Formulation Properties Sustainability contribution* Ceramic Tile Adhesives Cementitious MASTIC/RTU 1C Cem 2C Cem D2-CTA D1-CTA Tile Grouts EIFS/ETICS Cementitous Mastic Plasters & Renders Cementitious Gypsum based Skim coats/monocouche Systems Masonry Mortars Thickener Rheovis AS 1125 Rheovis AS 1130 Rheovis HS 1980 ASE-Thickener/ Liquid ASE-Thickener/ Liquid HASE-Thickener/ Shear thinning viscosity characteristics enabling good workability High yield point leading to very good sag-resistance, suitable for formulations complying with BFR XIV (drinking water approval for Germany High yield point leading to very good sag-resistance, thixotropic rheology behavior Dispersing Agents Dispex AA 4135 Dispex CX 4320 Sodium salt of polyacrylic acid/ Liquid Sodium salt of carboxylic acid copolymer/liquid Excellent dispersing efficiency for inorganic fillers and pigments, broad application range Very good dispersing efficiency for inorganic fillers and pigments, low impact on water resistance, broad application range Air Entraining Agents Vinapor AE 3912 F (former Hydropalat WE 3912 Defoamers Foamaster NO 2306 FoamStar PB 2706 FoamStar SI 2210 Vinapor DF 2941 F (former FoamStar PB 2941 Vinapor DF 9010 F Sodium lauryl sulphate Native-oil based defoamer Polyether derivate of fatty acid/liquid Modified polydimethylsiloxane/liquid Mineral oil on inorganic carrier/ Fatty alcohol alkoxylates and polysiloxanes on inorganic carrier/ High performing foaming agent, produces particularly fine, stable air bubbles Universal for water-based formulations, effectively removes micro-foam Universal for water-based formulations, easy to incorporate Strong spontaneous defoaming effect General purpose defoamer, RAL-UZ 113 conform Very efficient defoaming effect, easy dosing, low VOC (useful for EMICODE EC-1, RAL-UZ 113 conform Hydration Control Additives HyCon S 3200 F C-S-H seeding/ HyCon S 6100 F HyCon S 7100 L C-S-H seeding/ Aequeous suspension of C-S-H seeds/ Liquid Acceleration of systems based on OPC and increase of early strength development by C-S-H seeding technology, slight dispersing effect Acceleration of systems based on OPC and increase of early strength development by C-S-H seeding technology, higher viscosity for sag resistance Acceleration of systems based on OPC and increase of early strength development by C-S-H seeding technology = recommended = suitable MFFT = minimum film forming temperature All listed dispersions and redispersible powders, thickeners, dispersing agents and defoamers for Non-sag Applications are non-apeo products. Material Efficiency Durability Fast Construction Easy Application Low VOC Renewables Drinking Water Approval * The respective product has been evaluated with BASF s Sustainable Solution Steering Method and provides substantial sustainability contribution in the specific application. Abbreviations A = Pure Acrylic (HASE = (Hydrophobically modified Alkali-Soluble Emulsion HH = Hemi-Hydrate S/A = Styrene Acrylic S/B = Styrene Butadiene PU = Polyurethan PP = PCC = CC = SLU = VOC = Poly-Propylene Polymer Cement Concrete Cement Concrete Self-Levelling Underlayment Volatile Organic Compounds

12 Centers of Competence and Brands BASF SE, Ludwigshafen, Germany Dispersions Acronal Styrofan Formulation Additives Dispex Foamaster FoamStar Loxanol Rheovis BASF Construction Solutions GmbH, Trostberg, Germany Construction Additives HyCon Melflux Melment Melvis Starvis Vinapor = registered trademark of BASF BASF SE Polymer Dispersions for Construction Europe E-EDE/BB H201, Ludwigshafen, Germany dispersions-for-construction@basf.com BASF Construction Solutions GmbH Dr.-Albert-Frank-Straße Trostberg, Germany Tel Fax construction-solutions@basf.com The information in this leaflet is based on our current knowledge and experience. It does not constitute the agreed contractual quality of the product and, in view of the many factors that may affect processing and application of our products, does not relieve processors from carrying out their own investigations and tests. The agreed contractual quality of the product at the time of transfer of risk is based solely on the data in the specification data sheet. Any descriptions, drawings, photographs, data, proportions, weights, etc. given in this publication are subject to change without prior notice. It is the responsibility of the recipient of our product to ensure that any proprietary rights and existing laws and legislation are observed (03/2017.