NZQA Expiring unit standard version 2 Page 1 of 5. Demonstrate knowledge of liquid roof membrane systems
|
|
- Christopher Jones
- 5 years ago
- Views:
Transcription
1 Page 1 of 5 Title Demonstrate knowledge of liquid roof membrane systems Level 2 Credits 6 Purpose People credited with this unit standard are able to demonstrate knowledge: of liquid roof membrane substrates and system materials; equipment used in liquid membrane roofing; regulations and important information sources that apply to liquid roof membrane projects; liquid roof membrane project organisation; site preparation activities; and liquid roof membrane installation process. Classification Plumbing, Gasfitting and Drainlaying > Roofing Available grade Achieved Explanatory notes 1 Legislation relevant to this unit standard includes but is not limited to Health and Safety in Employment Act 1992, Building Act The following applicable document is available for download on the Department of Building and Housing website: Building Code compliance document Clause E2, containing Acceptable Solution E2/AS1 for External Moisture. 3 The New Zealand Building Code (NZBC) is a schedule to the Building Regulations It provides requirements for compliance with the Building Act 2004 when constructing a new building or altering an existing one. The Building Code sets out performance standards that building work must meet and covers aspects such as structural stability, fire safety, access, moisture control, durability, and services and facilities. 4 This unit standard includes EPDM liquid membrane covered by Building Code compliance document Acceptable Solution E2/AS1 for Clause E2 External Moisture. 5 Definitions Alternative solution a building design solution that differs totally or partially from those contained in the Acceptable Solutions, but still meets the performance requirements of the Building Code. It can be a minor variation from a Compliance Document, or a radically different design and construction approach. Industry use common use in the roofing industry. Job specifications refer to the documented information found in construction drawings, project specification documents, legislation, regulations and codes. Manufacturer recommendations refer to product information and product data sheets provided by the manufacturer of any given product.
2 Page 2 of 5 Notifiable work is as defined in A Guide to the Health and Safety in Employment Act 1992 (Wellington: Department of Labour, 2003); available at Site procedures refer to the procedures which are required to be observed for safe work practices at a particular site. 6 This unit standard may be assessed against off-job. Outcomes and evidence requirements Outcome 1 Demonstrate knowledge of liquid roof membrane substrates and system materials. 1.1 Roofing terms relevant to liquid membrane are identified in accordance with industry use. at least five terms. 1.2 Substrate types suitable for liquid roof membrane are identified in accordance with manufacturer recommendations. 1.3 The importance of proper substrate preparation is identified in terms of achieving soundness of the finished installation. 1.4 Roof slope suitable for liquid roof membrane application is identified in accordance with the NZBC. 1.5 System materials used in liquid roof membrane application are identified in accordance with job specifications and manufacturer recommendations. includes membrane reinforcement. Outcome 2 Demonstrate knowledge of equipment used in liquid membrane roofing. 2.1 Personal protection equipment used for installing liquid roof membrane is identified in accordance with material safety data information and site procedures for liquid roof membrane application. includes solvent spray system. 2.2 Firefighting equipment and its potential use when applying liquid roof membrane is described in accordance with site procedures.
3 Page 3 of Equipment and personal tools used for applying liquid roof membrane are described in terms of their purpose. equipment includes scaffolding, ladders, residual current device (RCD), mixing paddles, airless spray unit; personal tools include apron, hammer, rule, chalk line, stanley knife, trowel set, scissors, caulking gun, clean pails, nap roller, scraper. Outcome 3 Demonstrate knowledge of regulations and important information sources that apply to liquid roof membrane projects. 3.1 The information contained in Material Safety Data Sheets (MSDS) is identified. 3.2 The function of the NZBC and associated regulations is identified in relation to liquid membrane roofing projects. 3.3 The purpose of an alternative solution is identified in relation to the NZBC. 3.4 The primary purpose of notifiable work is identified compared to non-notifiable work. Outcome 4 Demonstrate knowledge of liquid roof membrane project organisation. 4.1 The function of a work schedule is identified in terms of controlling the work. 4.2 The function of a job sheet is identified in terms of defining the work. 4.3 Weather considerations are identified in terms of their effect when carrying out and planning the work. 4.4 The roles and responsibilities of project people are described in accordance with company requirements. may be for a simulated scenario; project people may include but are not limited to site supervisor, foreperson, architect, installation gangs, owner. Outcome 5 Demonstrate knowledge of site preparation activities.
4 Page 4 of A minimum of three basic site preparation activities are identified. 5.2 Delivered material checks are identified in accordance with job specifications. 5.3 Material storage requirements are identified according to material type in accordance with site procedures. 5.4 Roof structure inspections are identified that establish readiness for liquid roof membrane application in accordance with job specifications. Outcome 6 Demonstrate knowledge of liquid roof membrane installation process. 6.1 Liquid roof membrane installation process is identified in accordance with manufacturer recommendations. Replacement information This unit standard and unit standards and were replaced by unit standard This unit standard is expiring. Assessment against the standard must take place by the last date for assessment set out below. Status information and last date for assessment for superseded versions Process Version Date Last Date for Assessment Registration 1 23 January December 2020 Review 2 16 March December 2020 Consent and Moderation Requirements (CMR) reference 0227 This CMR can be accessed at Please note Providers must be granted consent to assess against standards (accredited) by NZQA, before they can report credits from assessment against unit standards or deliver courses of study leading to that assessment. Industry Training Organisations must be granted consent to assess against standards by NZQA before they can register credits from assessment against unit standards. Providers and Industry Training Organisations, which have been granted consent and which are assessing against unit standards must engage with the moderation system that applies to those standards.
5 Page 5 of 5 Requirements for consent to assess and an outline of the moderation system that applies to this standard are outlined in the Consent and Moderation Requirements (CMR). The CMR also includes useful information about special requirements for organisations wishing to develop education and training programmes, such as minimum qualifications for tutors and assessors, and special resource requirements.
NZQA registered unit standard version 1 Page 1 of 5. Demonstrate knowledge of roof membrane systems
Page 1 of 5 Title Demonstrate knowledge of roof membrane systems Level 3 Credits 6 Purpose This unit standard is intended for use in the training and assessment of people carrying out the installation
More informationNZQA Expiring unit standard version 2 Page 1 of 5. Describe roof membrane preparation and installation procedures
Page 1 of 5 Title Describe roof membrane preparation and installation procedures Level 3 Credits 10 Purpose People credited with this unit standard are able to describe: project planning activities; plywood
More informationNZQA Expiring unit standard version 2 Page 1 of 5. Describe metal roof and wall cladding preparation and installation procedures
Page 1 of 5 Title Describe metal roof and wall cladding preparation and installation procedures Level 3 Credits 10 Purpose People credited with this unit standard are able to describe: the planning and
More informationNZQA Expiring unit standard version 2 Page 1 of 5. Install and maintain roofing, rainwater handling, and cladding systems, and flashings
Page 1 of 5 Title Install and maintain roofing, rainwater handling, and cladding systems, and flashings Level 4 Credits 25 Purpose This unit standard is for people who work in the plumbing industry. People
More informationNZQA registered unit standard version 2 Page 1 of 5
Page 1 of 5 Title Display products in the salon environment Level 2 Credits 3 Purpose This unit standard is for entry-level learners working and intending to work in a salon People credited with this unit
More informationNZQA Expiring unit standard version 2 Page 1 of 5. Install and maintain water mains and water supply systems and reticulation
Page 1 of 5 Title Install and maintain water mains and water supply systems and reticulation Level 4 Credits 8 Purpose This unit standard is for people who work in the plumbing industry. People credited
More informationNZQA Expiring unit standard 2117 version 5 Page 1 of 5. Install, test, and maintain water supply backflow prevention devices
Page 1 of 5 Title Install, test, and maintain water supply backflow prevention devices Level 4 Credits 11 Purpose This unit standard is for people who work in the plumbing industry. People credited with
More informationNZQA registered unit standard 9506 version 5 Page 1 of 5. Conduct a sample analysis in a petrochemical laboratory
Page 1 of 5 Title Conduct a sample analysis in a petrochemical laboratory Level 4 Credits 6 Purpose This unit standard is for people employed in the petrochemical industry. People credited with this unit
More informationNZQA registered unit standard version 1 Page 1 of 5
Page 1 of 5 Title Analyse surface material and construction requirements and apply to developed kitchen or bathroom designs Level 5 Credits 10 Purpose This unit standard is for experienced people working
More informationNZQA registered unit standard version 5 Page 1 of 5. Manage hazard identification and control on plant and machinery
Page 1 of 5 Title Manage hazard identification and control on plant and machinery Level 4 Credits 4 Purpose People credited with this unit standard are able to describe: hazards associated with plant and
More informationNZQA registered unit standard version 1 Page 1 of 5. Develop, implement and review a HACCP application for a food processing operation
Page 1 of 5 Title Develop, implement and review a HACCP application for a food processing operation Level 5 Credits 20 Purpose This unit standard is for experienced people required to have in-depth knowledge
More informationNZQA registered unit standard version 1 Page 1 of 5
Page 1 of 5 Title Slice and package bread in a plant bakery Level 4 Credits 10 Purpose This unit standard is for people working or intending to work in a plant bakery as a baking tradesperson. People credited
More informationNZQA registered unit standard version 1 Page 1 of 5. Determine and describe construction of medium and large buildings
Page 1 of 5 Title Determine and describe construction of medium and large buildings Level 6 Credits 20 Purpose People credited with this unit standard are able to, for medium and large buildings, determine
More informationNZQA registered unit standard version 2 Page 1 of 5. Describe drinking-water contaminants of public health significance
Page 1 of 5 Title Describe drinking-water contaminants of public health significance Level 4 Credits 8 Purpose People credited with this unit standard are able to describe: the relationship between drinking-water
More informationNZQA registered unit standard 1512 version 8 Page 1 of 6
Page 1 of 6 Title Supervise asphalt paving construction activities Level 4 Credits 18 Purpose This unit standard is designed for people working in the pavement surfacing industry, towards recognition of
More informationNZQA registered unit standard version 2 Page 1 of 5
Page 1 of 5 Title Assess the optimisation of a drinking-water treatment plant, and describe critical control points Level 5 Credits 10 Purpose People credited with this unit standard are able to: assess
More informationNZQA registered unit standard version 4 Page 1 of 5
Page 1 of 5 Title Demonstrate the requirements for holding access permits for work on high voltage electrical lines, cables, and equipment Level 3 Credits 4 Purpose People credited with this unit standard
More informationNZQA registered unit standard version 3 Page 1 of 5
Page 1 of 5 Title Apply occupational health and safety requirements in the road transport and logistics industry Level 5 Credits 8 Purpose This unit standard is designed for team leaders, despatchers,
More informationNZQA registered unit standard version 2 Page 1 of 7. Demonstrate knowledge of metal roof and wall cladding systems
Page 1 of 7 Title Demonstrate knowledge of metal roof and wall cladding systems Level 3 Credits 7 Purpose This unit standard is intended for use in the training and assessment of people carrying out metal
More informationNZQA registered unit standard version 3 Page 1 of 5
Page 1 of 5 Title Carry out carpet repairs and reinstallation Level 3 Credits 8 Purpose This unit standard is for people training for the carpet cleaning industry. People credited with this standard are
More informationNational Certificate in Painting with optional strands in Wall Coverings, Spray Techniques, Specialised Coatings, and Industrial Coatings
NZQF NQ Ref 1071 Version 2 Page 1 of 9 National Certificate in Painting with optional strands in Wall Coverings, Spray Techniques, Specialised Coatings, and Industrial Coatings Level 3 Credits 116 This
More informationNZQA registered unit standard 6405 version 8 Page 1 of 5. Determine advertising options for small business enterprises. Marketing > Generic Marketing
Page 1 of 5 Title Determine advertising options for small business enterprises Level 4 Credits 5 Purpose People credited with this unit standard are able to: identify business and marketing objectives,
More informationNZQA registered unit standard version 2 Page 1 of 5. Create appointments and maintain appointment systems and records in the salon environment
Page 1 of 5 Title Create appointments and maintain appointment systems and records in the salon environment Level 3 Credits 5 Purpose This is a practically based unit standard for people who create and
More informationNZQA registered unit standard version 2 Page 1 of 5. Select and use tools and workshop equipment in the industrial textile fabrication industry
Page 1 of 5 Title Select and use tools and workshop equipment in the industrial textile fabrication industry Level 3 Credits 6 Purpose This unit standard is for people entering or working in the industrial
More informationNZQA registered unit standard version 3 Page 1 of 5. Carry out automated assembly of wood packaging products
Page 1 of 5 Title Carry out automated assembly of wood packaging products Level 3 Credits 5 Purpose People credited with this unit standard are able to: demonstrate knowledge of the health and safety issues
More informationNZQA registered unit standard version 4 Page 1 of 5. Operate power-operated elevating work platforms (EWP) in an electricity supply environment
Page 1 of 5 Title Operate power-operated elevating work platforms (EWP) in an electricity supply environment Level 3 Credits 5 Purpose People credited with this unit standard are able to: demonstrate knowledge
More informationNZQA registered unit standard version 2 Page 1 of 5. Complete pre-competition preparations as an official at a competitive sports event
Page 1 of 5 Title Complete pre-competition preparations as an official at a competitive sports event Level 3 Credits 3 Purpose This unit standard is designed primarily for people seeking to further develop
More informationNZQA registered unit standard version 1 Page 1 of 5
Page 1 of 5 Title Operate timber treatment plant Level 3 Credits 15 Purpose People credited with this unit standard are able to: manage hazards associated with operating and maintaining timber treatment
More informationNZQA registered unit standard version 6 Page 1 of 5. Operate biological treatment systems for effluent water in an energy and chemical plant
Page 1 of 5 Title Operate biological treatment systems for effluent water in an energy and chemical plant Level 4 Credits 8 Purpose This unit standard is for people working as boiler operators and energy
More informationNZQA registered unit standard version 1 Page 1 of 5. Interpret paving instructions and construct bituminous mix layers
Page 1 of 5 Title Interpret paving instructions and construct bituminous mix layers Level 4 Credits 14 Purpose People credited with this unit standard are able to: interpret paving instructions for bituminous
More informationNZQA registered unit standard version 4 Page 1 of 6. Carry out acceptance, commissioning and maintenance tests on power transformers
Page 1 of 6 Title Carry out acceptance, commissioning and maintenance tests on power transformers Level 4 Credits 6 Purpose People credited with this unit standard are able to: prepare to test power transformers
More informationThis unit standard is expiring
Page 1 of 5 Title Apply intelligence analysis techniques to complete an intelligence product Level 5 Credits 15 Purpose People credited with this unit standard are able to: define the intelligence problem
More informationNZQA registered unit standard version 7 Page 1 of 5. Demonstrate and apply knowledge of safeguards for use with portable electrical appliances
Page 1 of 5 Title Demonstrate and apply knowledge of safeguards for use with portable electrical appliances Level 2 Credits 3 Purpose This unit standard covers knowledge of safeguards used in conjunction
More informationNZQA registered unit standard 5555 version 6 Page 1 of 5
Page 1 of 5 Title Arrange and manage a visitor conference Level 5 Credits 20 Purpose People credited with this unit standard are able to: plan operations for a visitor conference; manage monetary, human
More informationNZQA registered unit standard 9184 version 6 Page 1 of 5
Page 1 of 5 Title Erect and dismantle non-notifiable prefabricated frame scaffolding up to five metres in height Level 3 Credits 5 Purpose People credited with this unit standard are able to: demonstrate
More informationNZQA registered unit standard version 1 Page 1 of 5. Identify and inspect road safety barrier systems on Infrastructure Works sites
Page 1 of 5 Title Identify and inspect road safety barrier systems on Infrastructure Works sites Level 4 Credits 10 Purpose People credited with this unit standard are able to: identify and explain road
More informationNZQA registered unit standard version 2 Page 1 of 5. Demonstrate knowledge of safety management systems for an aviation environment
Page 1 of 5 Title Demonstrate knowledge of safety management systems for an aviation environment Level 5 Credits 8 Purpose People credited with this unit standard are, for an aviation environment, able
More informationNZQA registered unit standard version 4 Page 1 of 5
Page 1 of 5 Title Describe drinking-water supply reticulation systems Level 5 Credits 8 Purpose People credited with this unit standard are able to describe: the reticulated services found on public and
More informationNZQA registered unit standard version 1 Page 1 of 5. Construction Trades > Painting and Decorating
Page 1 of 5 Title Apply advanced decorative paint finishes Level 5 Credits 20 Purpose This specialist unit standard is for people working in the painting area of the painting and decorating sector. People
More informationNZQA registered unit standard version 4 Page 1 of 5
Page 1 of 5 Title Formulate event management strategies and coordinate event management services for a public relations event Level 6 Credits 10 Purpose This unit standard is for people who have, or seek
More informationNZQA registered unit standard version 2 Page 1 of 5
Page 1 of 5 Title Describe the preparation of, set up, and simultaneously operate, a multi-winch crane during crane operations Level 4 Credits 6 Purpose People credited with this unit standard are able
More informationNZQA registered unit standard version 3 Page 1 of 5
Page 1 of 5 Title Demonstrate and apply knowledge of safe welding principles and quality assurance under supervision Level 2 Credits 4 Purpose This unit standard is for the training of mechanical engineering
More informationNZQA registered unit standard 9536 version 5 Page 1 of 6. Undertake petrochemical wellhead maintenance activities under supervision
Page 1 of 6 Title Undertake petrochemical wellhead maintenance activities under supervision Level 3 Credits 4 Purpose This unit standard applies to operational activities carried out on producing wellheads.
More informationNZQA registered unit standard version 2 Page 1 of 5. Use a mini-crawler crane with outriggers to lift and place regular loads
Page 1 of 5 Title Use a mini-crawler crane with outriggers to lift and place regular loads Level 3 Credits 15 Purpose People credited with this unit standard are able to: prepare to lift and place regular
More informationNZQA registered unit standard version 2 Page 1 of 5. Apply design principles in the design of scaffolding
Page 1 of 5 Title Apply design principles in the design of scaffolding Level 5 Credits 12 Purpose This unit standard is for people who have intermediate scaffolding skills and who want to develop their
More informationThis unit standard is expiring
Page 1 of 5 Title Prepare edible green bovine offal products for packaging Level 2 Credits 10 Purpose This entry level unit standard is for people who are employed in the offal department of meat processing
More informationNZQA registered unit standard version 2 Page 1 of 5. Describe the roles and functions of a CIMS Incident Management Team (IMT) at an incident
Page 1 of 5 Title Describe the roles and functions of a CIMS Incident Management Team (IMT) at an incident Level 4 Credits 4 Purpose People credited with this unit standard are able to describe: the interrelated
More informationNZQA registered unit standard 2930 version 5 Page 1 of 5
Page 1 of 5 Title Develop and coordinate marketing strategies Level 6 Credits 10 Purpose This unit standard is for people who have, or seek responsibility for, or provide advice for, developing the strategic
More informationNZQA Expiring unit standard version 4 Page 1 of 5. Prepare and operate automated bread slicing and packaging equipment
Page 1 of 5 Title Prepare and operate automated bread slicing and packaging equipment Level 3 Credits 5 Purpose This unit standard is for people who are currently working, or intend to work, in jobs which
More informationNZQA Expiring unit standard 3885 version 8 Page 1 of 5. Demonstrate knowledge of and use an oxy-acetylene welding plant in the motor body industry
Page 1 of 5 Title Demonstrate knowledge of and use an oxy-acetylene welding plant in the motor body industry Level 2 Credits 4 Purpose This unit standard is for people who are at pre-employment level or
More informationNZQA registered unit standard 9537 version 5 Page 1 of 6. This unit standard applies to operational activities carried out on producing wellheads.
Page 1 of 6 Title Replace faulty petrochemical wellhead equipment Level 4 Credits 8 Purpose This unit standard applies to operational activities carried out on producing wellheads. People credited with
More informationNZQA registered unit standard version 3 Page 1 of 5. Install high voltage (HV) electricity network overhead conductors
Page 1 of 5 Title Install high voltage (HV) electricity network overhead conductors Level 4 Credits 8 Purpose People credited with this unit standard are able to: interpret scope of work for installing
More informationNZQA registered unit standard version 2 Page 1 of 5. Operate x-ray and electronic scanning equipment in a prison environment
Page 1 of 5 Title Operate x-ray and electronic scanning equipment in a prison environment Level 4 Credits 5 Purpose This unit standard is for people working as officers in a prison environment and covers
More informationNZQA registered unit standard version 2 Page 1 of 5. Develop training and support programmes, and recruit, appoint, and manage CDEM volunteers
Page 1 of 5 Title Develop training and support programmes, and recruit, appoint, and manage CDEM volunteers Level 5 Credits 6 Purpose This unit standard is intended for people who fulfil the role of a
More informationNZQA registered unit standard version 1 Page 1 of 5. Demonstrate and apply knowledge of maintenance plans for mechanical equipment and plant
Page 1 of 5 Title Demonstrate and apply knowledge of maintenance plans for mechanical equipment and plant Level 5 Credits 8 Purpose This unit standard is for people who carry out maintenance on mechanical
More informationNZQA Expiring unit standard 3713 version 7 Page 1 of 6. Print single colour work on a sheet-fed registering offset press
Page 1 of 6 Title Print single colour work on a sheet-fed registering offset press Level 3 Credits 10 Purpose People credited with this unit standard are able to: demonstrate knowledge of factors affecting
More informationNZQA registered unit standard version 4 Page 1 of 5
Page 1 of 5 Title Operate systems for boiler feedwater treatment Level 4 Credits 15 Purpose This unit standard is for people working as boiler operators and energy and chemical process operators in an
More informationNZQA registered unit standard version 1 Page 1 of 5. Demonstrate knowledge of equipment and processes for constructing slurry surfacings
Page 1 of 5 Title Demonstrate knowledge of equipment and processes for constructing slurry surfacings Level 4 Credits 6 Purpose People credited with this unit standard are able to demonstrate knowledge
More informationNZQA registered unit standard version 3 Page 1 of 5
Page 1 of 5 Title Operate the drill rig for horizontal directional drilling Level 3 Credits 15 Purpose People credited with this unit standard are able to: care for and maintain horizontal directional
More informationNZQA registered unit standard version 5 Page 1 of 5. Make and repair a boat cockpit canopy and side curtains
Page 1 of 5 Title Make and repair a boat cockpit canopy and side curtains Level 4 Credits 10 Purpose This unit standard is for people who work in the industrial textile fabrication industry. People credited
More informationNZQA registered unit standard 6945 version 7 Page 1 of 5. Forestry > Forest Mechanised Harvesting
Page 1 of 5 Title Fell trees using a mechanised harvesting machine Level 4 Credits 20 Purpose This unit standard is intended for people employed in a mechanised tree felling role in a forestry harvesting
More informationNZQA registered unit standard version 2 Page 1 of 6. Demonstrate professional and ethical behaviour as an engineering technician
Page 1 of 6 Title Demonstrate professional and ethical behaviour as an engineering technician Level 6 Credits 15 Purpose This unit standard is intended for people working towards the New Zealand Diploma
More informationNZQA Expiring unit standard 2272 version 8 Page 1 of 5
Page 1 of 5 Title Print single colour work on a reel-fed printing press Level 3 Credits 20 Purpose People credited with this unit standard are able to: demonstrate knowledge of factors affecting printing
More informationNZQA Expiring unit standard version 5 Page 1 of 5. This unit standard is for people training for the carpet cleaning industry.
Page 1 of 5 Title Restore water affected carpet Level 4 Credits 12 Purpose This unit standard is for people training for the carpet cleaning industry. People credited with this standard are able to: determine
More informationNZQA registered unit standard version 4 Page 1 of 5. Carry out switching operations on metal clad switchgear
Page 1 of 5 Title Carry out switching operations on metal clad switchgear Level 4 Credits 3 Purpose People credited with this unit standard are able to: demonstrate knowledge of metal clad switchgear,
More informationNZQA registered unit standard version 3 Page 1 of 5. Demonstrate and apply knowledge of costs to the pricing of a road transport service
Page 1 of 5 Title Demonstrate and apply knowledge of costs to the pricing of a road transport service Level 5 Credits 7 Purpose This unit standard is intended for people who are required to prepare quotes
More informationNZQA registered unit standard version 1 Page 1 of 6. Demonstrate knowledge of managing conflict situations in a security context
Page 1 of 6 Title Demonstrate knowledge of managing conflict situations in a security context Level 2 Credits 4 Purpose This unit standard covers knowledge of conflict management for security personnel.
More informationNZQA registered unit standard 738 version 5 Page 1 of 7
Page 1 of 7 Title Kiln dry timber Level 4 Credits 25 Purpose People credited with this unit standard are able to: demonstrate knowledge of kiln drying operations; demonstrate knowledge of dry and wet bulb
More informationNZQA Expiring unit standard version 6 Page 1 of 5. Operate a clamshell die cutter in the corrugated packaging industry
Page 1 of 5 Title Operate a clamshell die cutter in the corrugated packaging industry Level 3 Credits 8 Purpose People credited with this unit standard are able to: plan ahead, to avoid delays during make
More informationNZQA Expiring unit standard version 6 Page 1 of 5. Conduct prisoner and security searches in a prison environment
Page 1 of 5 Title Conduct prisoner and security searches in a prison environment Level 4 Credits 6 Purpose This unit standard is for people working as officers in a prison environment and covers conducting
More informationNZQA registered unit standard version 3 Page 1 of 5. Infrastructure Works > Civil Plant Operation
Page 1 of 5 Title Operate a motor grader for earthworks Level 3 Credits 20 Purpose People credited with this unit standard are able to: prepare for grader operations; manoeuvre and control grader on site;
More informationNZQA registered unit standard Version 1 Page 1 of 5. Demonstrate operational knowledge of the law in a regulatory compliance context
Page 1 of 5 Title Demonstrate operational knowledge of the law in a regulatory compliance context Level 4 Credits 12 Purpose People credited with this unit standard are able to: demonstrate knowledge of
More informationNZQA registered unit standard version 3 Page 1 of 5. Demonstrate and apply advanced knowledge of power system engineering
Page 1 of 5 Title Demonstrate and apply advanced knowledge of power system engineering Level 6 Credits 15 Purpose This unit standard covers knowledge of three-phase power systems with an emphasis on distribution
More informationNZQA registered unit standard version 1 Page 1 of 5. Diagnose and repair faulty electronic equipment to component level
Page 1 of 5 Title Diagnose and repair faulty electronic equipment to component level Level 4 Credits 40 Purpose This unit standard is intended for electronics technicians who are responsible for the diagnosis
More informationNZQA registered unit standard version 1 Page 1 of 6. Operate a bitumen distributor for blending and applying bituminous binders
Page 1 of 6 Title Operate a bitumen distributor for blending and applying bituminous binders Level 4 Credits 22 Purpose * Classification People credited with this unit standard are able to: plan and prepare
More informationNZQA registered standard version 2 Page 1 of 7. Demonstrate and apply competence as an engineering technician
Page 1 of 7 Title Demonstrate and apply competence as an engineering technician Level 6 Credits 60 Purpose This unit standard is for people working towards the New Zealand Diploma in Engineering Practice
More informationCheck, coat and reinforce fibre cement substrate to form a Proprietary Plaster Cladding System on site
Page 1 of 5 Check, coat and reinforce fibre cement substrate to form a Proprietary Plaster Cladding System on site Level 3 Credits 20 Purpose People credited with this unit standard are able to: check
More informationNZQA registered unit standard version 5 Page 1 of 5
Page 1 of 5 Title Demonstrate knowledge of the prevention and management of Discomfort, Pain and Injury (DPI) in the workplace Level 3 Credits 8 Purpose This unit standard is for people involved in the
More informationNZQA registered unit standard version 4 Page 1 of 5. Forestry > Tree Felling
Page 1 of 5 Title Fell trees safely using a chainsaw Level 3 Credits 10 Purpose People completing this unit standard will have the skills required to safely fell individual trees using basic techniques.
More informationNZQA registered unit standard version 1 Page 1 of 5
Page 1 of 5 Title Demonstrate knowledge of electric lighting systems Level 3 Credits 6 Purpose This unit standard covers knowledge of electric lighting for electricians and related trades. People credited
More informationCheck, coat and reinforce polystyrene substrate to form a Proprietary Plaster Cladding System on site
Page 1 of 5 Check, coat and reinforce polystyrene substrate to form a Proprietary Plaster Cladding System on site Level 3 Credits 20 Purpose People credited with this unit standard are able to: check polystyrene
More informationNZQA registered unit standard version 6 Page 1 of 5
Page 1 of 5 Title Demonstrate knowledge of circuit protection Level 3 Credits 3 Purpose This unit standard is for electricians and related trades who need to understand and select devices for the protection
More informationDemonstrate knowledge of vegetation fire behaviour
Page 1 of 5 Demonstrate knowledge of vegetation fire behaviour Level 5 Credits 8 Purpose This unit standard is for people with responsibilities for vegetation fire pre-suppression preparedness planning
More informationPUBLIC SECTOR SERVICE DELIVERY Establish client needs and gain agreement on requirements for public sector service delivery
1 of 5 level: 6 credit: 15 planned review date: February 2006 sub-field: purpose: entry information: accreditation option: moderation option: Public Sector Services People credited with this unit standard
More informationOperate a root crop harvester
Page 1 of 5 Operate a root crop harvester Level 4 Credits 20 Purpose People credited with this unit standard are able to: select and prepare root crop harvesting equipment and machinery; carry out field
More informationNZQA registered unit standard 6973 version 7 Page 1 of 5. Prune plantation trees with a chainsaw from the ground
Page 1 of 5 Title Prune plantation trees with a chainsaw from the ground Level 3 Credits 10 Purpose This unit standard is intended for people employed in a pruning role in a commercial forestry operation.
More informationNZQA registered unit standard version 1 Page 1 of 7. Plan and fell trees using advanced techniques in a commercial forest harvesting operation
Page 1 of 7 Title Plan and fell trees using advanced techniques in a commercial forest harvesting operation Level 4 Credits 25 Purpose This unit standard is intended for professional tree fellers in a
More informationNZQA registered unit standard 3851 version 7 Page 1 of 5. Service commercial refrigeration and/or air conditioning systems
Page 1 of 5 Title Service commercial refrigeration and/or air conditioning systems Level 4 Credits 20 Purpose This unit standard is for people who work in the refrigeration and air conditioning sector
More informationNZQA registered unit standard version 2 Page 1 of 5. Generate chlorine dioxide for wood pulp bleaching
Page 1 of 5 Title Generate chlorine dioxide for wood pulp bleaching Level 5 Credits 15 Purpose People credited with this unit standard are able to: explain fundamentals of chlorine dioxide generation;
More informationNATIONAL CERTIFICATE in 1 of 5
NATIONAL CERTIFICATE in 1 of 5 level of qualification: 4 credit total: 135 level 3 credits: 26 level 4 credits: 77 level 5 credits: 32 registration date: 24 July 2001 planned review date: 31 July 2005
More informationPUBLIC SECTOR SERVICE DELIVERY Develop public sector service delivery objectives, and implement systems to meet client needs
1 of 5 level: 7 credit: 20 planned review date: February 2006 sub-field: purpose: entry information: accreditation option: moderation option: Public Sector Services People credited with this unit standard
More informationNZQA registered unit standard version 1 Page 1 of 5
Page 1 of 5 Title Demonstrate knowledge of Micro-Hydro Systems Level 4 Credits 15 Purpose This unit standard is for people who work with renewable energy systems and covers knowledge of the design and
More informationPrepare a schedule of quantities, cost estimate and tender documentation for landscape work
Page 1 of 5 Prepare a schedule of quantities, cost estimate and tender documentation for landscape work Level 5 Credits 15 Purpose This unit standard is for people working, or intending to work, in landscaping.
More informationNZQA registered unit standard 4884 version 7 Page 1 of 5. Recruit, induct, and manage volunteers in a recreation organisation
Page 1 of 5 Title Recruit, induct, and manage volunteers in a recreation organisation Level 5 Credits 6 Purpose This unit standard is intended for a person working in a recreation facility in a supervisory
More informationNZQA unit standard version 2 Page 1 of 5. Demonstrate understanding of a HACCP application in a food processing operation
Page 1 of 5 Title Demonstrate understanding of a HACCP application in a food processing operation Level 4 Credits 10 Purpose This unit standard is for experienced operators and others required to have
More informationNZQA registered unit standard 1243 version 8 Page 1 of 5. Forestry > Forest Silvicultural Operations
Page 1 of 5 Title Prune plantation trees from the ground Level 3 Credits 10 Purpose This unit standard is intended for people employed in a pruning role in a forestry operation. People credited with this
More informationNZQA registered unit standard version 5 Page 1 of 5. Carry out the functions of the poleman on a cable harvesting landing
Page 1 of 5 Title Carry out the functions of the poleman on a cable harvesting landing Level 3 Credits 10 Purpose This unit standard is intended for people employed as a poleman in a cable harvesting operation.
More informationVEHICLE BODYWORK Mask a repair for priming; and prime, fill, and sand a repair in the motor body industry
1 of 5 level: 2 credit: 3 planned review date: December 2009 sub-field: Motor Industry replacement information: This unit standard and unit standard 21703 replaced unit standard 3868 and unit standard
More informationNZQA registered unit standard version 5 Page 1 of 6. Assess and manage individual hazardous trees. Forestry > Tree Felling
Page 1 of 6 Title Assess and manage individual hazardous trees Level 4 Credits 15 Purpose People credited with this unit standard are able to: prepare for felling hazardous trees; assess the specific hazard
More informationNZQA registered unit standard version 2 Page 1 of 5. Demonstrate knowledge of forest harvesting operations
Page 1 of 5 Title Demonstrate knowledge of forest harvesting operations Level 5 Credits 8 Purpose People credited with this unit standard are able to: explain the objectives of forest harvesting operations;
More information