National Certificate in Painting with optional strands in Wall Coverings, Spray Techniques, Specialised Coatings, and Industrial Coatings

Transcription

1 NZQF NQ Ref 1071 Version 2 Page 1 of 9 National Certificate in Painting with optional strands in Wall Coverings, Spray Techniques, Specialised Coatings, and Industrial Coatings Level 3 Credits 116 This qualification is expiring. The last date to meet the requirements is 31 December Purpose This qualification is awarded to people who have demonstrated competence in Painting. Completion of any of the strands in Wall Coverings, Spray Techniques, Specialised Coatings or Industrial Coatings is optional. The qualification is designed to recognise the skills and knowledge required to competently carry out painting and/or decorating works in a safe and professional manner. The certificate is designed for those wishing to work in the painting and decorating industry. The core National Certificate in Painting recognises the underpinning knowledge and key skills required of people working in the painting industry. The four optional strands allow for areas of specialisation and further skill development. Holders of the National Certificate in Painting will be able to work with a trade level of knowledge for painting. Optional strands provide additional skills within the scope of the strand awarded. The qualification is intended to promote professional standards for the industry and to provide a means of recognising current competency and/or prior learning for those already working in the industry. It is anticipated an additional qualification will be established that will recognise a range of business and management skills required for supervisors or managers to maintain a successful painting and decorating operation. Replacement Information This qualification has been replaced by the National Certificate in Painting and Decorating (Level 4) [Ref: 1696]. This qualification replaced the National Certificate in Painting and Decorating with strands in Specialised Coatings, Industrial Coatings, and Decorating [Ref: 0021] in December 2003.

2 NZQF NQ Ref 1071 Version 2 Page 2 of 9 Credit Range Core Qualification Wall Coverings Optional Strand Level 2 credits Level 3 credits Level 4 credits Minimum totals Level of qualification Spray Techniques Optional Strand Specialised Coatings Optional Strand Industrial Coatings Optional Strand Compulsory Elective Compulsory Elective Level 2 credits Level 3 credits Level 4 credits Minimum totals Level of qualification 4 4 Requirements for Award of Qualification Award of NZQF National Qualifications Credit gained for a standard may be used only once to meet the requirements of this qualification. Unit standards and achievement standards that are equivalent in outcome are mutually exclusive for the purpose of award. The table of mutually exclusive standards is provided on the New Zealand Qualifications Authority (NZQA) website: Reviewed standards that continue to recognise the same overall outcome are registered as new versions and retain their identification number (ID). Any version of a standard with the same ID may be used to meet qualification requirements that list the ID and/or that specify the past or current classification of the standard. Summary of Requirements Compulsory standards The following strands are optional Wall Coverings Optional Strand Spray Techniques Optional Strand Specialised Coatings Optional Strand Industrial Coatings Optional Strand

3 NZQF NQ Ref 1071 Version 2 Page 3 of 9 Detailed Requirements Compulsory Planning and Construction > Construction Trades > Carpentry Erect scaffolds up to five metres on site 3 4 Planning and Construction > Construction Trades > Carpentry Theory Demonstrate knowledge of timber and metal scaffolds up to five metres 3 2 Planning and Construction > Painting and Decorating > Decorating 98 Reduce exposure to health and safety hazards in 2 5 painting, decorating, and coating 1067 Describe the components, properties, and possible 4 14 defects of residential surface coatings 1068 Prepare colour schemes Describe, select, use, and maintain paint rollers Describe, select, use, and maintain paint brushes Apply surface coatings to new and previously coated 3 11 timber and reconstituted wood surfaces 1080 Apply surface coatings to new and previously coated 3 9 cement and plaster surfaces 1082 Produce broken colour and multicolour effects and 4 9 blend colours on building surfaces 8488 Reglaze residential window and door frames Prepare building surfaces by burning off and using liquid strippers Prepare building surfaces by waterblasting and machine sanding Planning and Construction > Painting and Decorating > Industrial Coatings 1081 Apply surface coatings to new and previously coated metal surfaces 3 6

4 NZQF NQ Ref 1071 Version 2 Page 4 of 9 Planning and Construction > Painting and Decorating > Specialised Coatings 1902 Apply surface coatings to new and previously coated plastic surfaces 3 3 Planning and Construction > Painting and Decorating > Spray Painting 99 Appreciate and use colour in paint finishing 2 6 Wall Coverings Optional Strand Planning and Construction > Painting and Decorating > Decorating 1075 Prepare for hanging wallpapers and friezes Hang wallpapers and friezes Hang specialised wallcoverings Hang vinyl wallcoverings 4 8 Spray Techniques Optional Strand Planning and Construction > Painting and Decorating > Spray Painting 97 Apply surface coatings by conventional spray 3 12 techniques 100 Apply liquid surface coating by airless spray techniques 3 8 Specialised Coatings Optional Strand Meet the requirements of all of the following sets Strand Compulsory Strand Elective Strand Compulsory Planning and Construction > Construction Trades > Carpentry Use adhesives and sealants on site 4 3

5 NZQF NQ Ref 1071 Version 2 Page 5 of 9 Planning and Construction > Construction Trades > Carpentry Theory Demonstrate knowledge of adhesives and sealants in construction work 4 2 Planning and Construction > Painting and Decorating > Specialised Coatings 1064 Apply waterproofing coatings and membranes Describe the components, properties, and possible 4 5 defects of specialised surface coatings 1069 Apply texture coating systems to building surfaces 4 5 Strand Elective A minimum of 1 standard Planning and Construction > Painting and Decorating > Specialised Coatings 1074 Apply floor coatings and screeds Apply thermal/plaster cladding systems to buildings 4 10 Industrial Coatings Optional Strand Meet the requirements of all of the following sets Strand Compulsory Strand Elective Strand Compulsory Planning and Construction > Construction Trades > Carpentry Use adhesives and sealants on site 4 3 Planning and Construction > Construction Trades > Carpentry Theory Demonstrate knowledge of adhesives and sealants in construction work 4 2 Planning and Construction > Painting and Decorating > Industrial Coatings 1065 Describe the components, properties, and possible defects of industrial surface coatings 4 5

6 NZQF NQ Ref 1071 Version 2 Page 6 of Gritblast steel surfaces 4 4 Planning and Construction > Painting and Decorating > Specialised Coatings 1064 Apply waterproofing coatings and membranes Apply floor coatings and screeds 4 5 Strand Elective A minimum of 7 credits Planning and Construction > Construction Trades > Core Construction 2138 Remove asbestos products 3 2 Planning and Construction > Painting and Decorating > Industrial Coatings 2514 Apply metal spray coatings to steel surfaces Apply coatings to pipelines and underground structures Apply fireproofing to structural steel and equipment supports 4 3 Transition Arrangements Version 2 Version 2 was issued to indicate that this qualification is expiring. This qualification has been replaced by the National Certificate in Painting and Decorating (Level 4) [Ref: 1696]. For detailed information see Review Summaries on the NZQA website. Previous versions of the qualification Version 1 of this qualification replaced the National Certificate in Painting and Decorating with strands in Specialised Coatings, Industrial Coatings, and Decorating [Ref: 0021]. The main differences between the new and the replaced qualification are: The compulsory core is a stand-alone qualification at level 3, it includes the requirements of the Decorating strand and new unit standards and Minimum credit has increased from 85 credits to 116 credits.

7 NZQF NQ Ref 1071 Version 2 Page 7 of 9 The Specialised Coatings and Industrial Coatings strands are retained as optional strands, and a further two have been added: Wall Coverings and Spray Techniques, to recognise the specialised skill areas in the industry. Details of unit standards 1068, 1071, 1073, 1079, 1080 and 1082 have been updated to reflect their new domain Painting. Unit standards 641, 642, 643, 1063, 1070, 1271, 13035, and have been removed. This qualification contains standards that replace earlier standards. For the purposes of this qualification, people who have gained credit for the expiring standards are exempt from the requirement to gain credit for the replacement standards see table below. Credit for Exempt from , Existing trainees may complete the National Certificate in Painting and Decorating with strands in Specialised Coatings, Industrial Coatings, and Decorating [Ref: 0021] and have until the end of December 2005 to do so. Alternatively, they may choose to transfer their existing achievement to the replacement qualification. The last date for award of the replaced qualification is 30 December Any candidate who feels they have been disadvantaged by the transition should in the first instance contact New Zealand Painting Contractors Association of Employers Industry Training (Inc) at the address below. NZQF National Qualification Registration Information Process Version Date Last Date for Assessment Registration 1 December 2003 December 2014 Review 2 August 2011 December 2014 Standard Setting Body PO Box 2615 Wellington 6140 Telephone Fax info@bcito.org.nz Website Other standard setting bodies whose standards are included in the qualification

8 NZQF NQ Ref 1071 Version 2 Page 8 of 9 Plumbing, Gasfitting and Drainlaying ITO Ltd Certification This certificate will display the logos of NZQA, and the organisation that has been granted consent to assess against standards that meet the requirements of the qualification (accredited). Classification This qualification is classified according to the classification system listed on the Directory of Assessment Standards (DAS) and the New Zealand Standard Classification of Education (NZSCED) system as specified below. DAS Classification NZSCED Code Description Code Description 1923 Planning and Construction > Painting and Decorating > Painting Architecture and Building > Building > Painting, Decorating, Sign Writing and Other Finishes Quality Management Systems Providers and Industry Training s must be granted consent to assess by a recognised Quality Assurance Body before they can register credits from assessment against standards. with consent to assess and Industry Training s assessing against standards must engage with the moderation system that applies to those standards. Consent to assess requirements and the moderation system are outlined in the associated Consent and Moderation Requirements (CMR) for each standard.

9 NZQF NQ Ref 1071 Version 2 Page 9 of 9 Prerequisite Diagram Strand: Wall Coverings Level Level Strand: Spray Techniques 97 Level Strand: Industrial Coatings Elective 100 Level Level