* MANUFACTURED AFTER JULY 2014
|
|
- Mark Jackson
- 5 years ago
- Views:
Transcription
1 R STYLE 0 0 ASSEMBLY NOTES: USE PARKER O-LUBE ON ALL O-RINGS AND MATING SURFACES, UNLESS OTHERWISE NOTED. * MANUFACTURED AFTER JULY 0 PRODUCT MERCURY MASTER CENTER WITH LUG USE PERMABOND LM OR LOCTITE. USE PRIMER T AND PERMABOND HH0 OR LOCTITE. DO NOT USE PARKER O-LUBE. USE LOW-TEMP LUBRIPLATE. DIMPLE AT ASSEMBLY. USE PERMABOND LH00 OR LOCTITE. HANDWHEEL ROTATES COUNTER CLOCKWISE TO OPEN AND CLOCKWISE TO CLOSE. CLEAN WITH ALCOHOL. USE PERMABOND MM ALL VIEWS SHOWN WITH SHUT-OFF BALL OPEN. 0 0 TORQUE TO FT.LBS USE ON OPPOSITE SIDE 0 USE ON SIDE SHOWN 0 BALLS DUAL INLET /"," SWIVEL " STORZ BALLS /"," SWIVEL " STORZ PHONE: 0.. or 00.. I FAX: 0.. or WARRANTY AND DISCLAIMER*: We warrant Akron Brass products for a period of five () years* after purchase against defects in materials or workmanship. Akron Brass will repair or replace product which fails to satisfy this warranty. Repair or replacement any cause whatsoever. No person has authority to change this warranty. *Unless otherwise provided herein. Akron Brass industrial electronic components & the Severe-Duty Monitor have a one () year warranty. Select Akron Brass handline nozzles and valves carry a ten (0) year warranty. Scene Star Lights carry a () year warranty. Weldon products have a two () year warranty from date of manufacture (excluding consumable components). Select Weldon LED products carry a five () year warranty. Honda products 0 Akron Brass Company. All rights reservered. No portion of this can be reproduced without the express written consent of the Akron Brass Company. D
2 STYLE 0-0- PRODUCT MERCURY MASTER 000 X X X X LEG ASSEMBLY DETAIL SCALE.000 PHONE: 0.. or 00.. I FAX: 0.. or WARRANTY AND DISCLAIMER*: We warrant Akron Brass products for a period of five () years* after purchase against defects in materials or workmanship. Akron Brass will repair or replace product which fails to satisfy this warranty. Repair or replacement any cause whatsoever. No person has authority to change this warranty. *Unless otherwise provided herein. Akron Brass industrial electronic components & the Severe-Duty Monitor have a one () year warranty. Select Akron Brass handline nozzles and valves carry a ten (0) year warranty. Scene Star Lights carry a () year warranty. Weldon products have a two () year warranty from date of manufacture (excluding consumable components). Select Weldon LED products carry a five () year warranty. Honda products 0 Akron Brass Company. All rights reservered. No portion of this can be reproduced without the express written consent of the Akron Brass Company. D
3 STYLE 0-0- PRODUCT MERCURY MASTER 000 ASSEMBLY NOTES: USE PARKER O-LUBE ON ALL O-RINGS AND MATING SURFACES, UNLESS OTHERWISE NOTED. ALL VIEWS SHOWN WITH SHUT-OFF BALL OPEN. USE PERMABOND LM OR LOCTITE. USE PRIMER T AND PERMABOND HH0 OR LOCTITE. DO NOT USE PARKER O-LUBE. USE LOW-TEMP LUBRIPLATE. DIMPLE AT ASSEMBLY. USE PERMABOND LH00 OR LOCTITE. HANDWHEEL ROTATES COUNTER CLOCKWISE TO OPEN AND CLOCKWISE TO CLOSE. CLEAN WITH ALCOHOL. 0 USE PERMABOND MM. TORQUE TO FT.LBS. 0 0 TORQUE TO - IN-LB 0 GEAR BOX 0 PHONE: 0.. or 00.. I FAX: 0.. or WARRANTY AND DISCLAIMER*: We warrant Akron Brass products for a period of five () years* after purchase against defects in materials or workmanship. Akron Brass will repair or replace product which fails to satisfy this warranty. Repair or replacement any cause whatsoever. No person has authority to change this warranty. *Unless otherwise provided herein. Akron Brass industrial electronic components & the Severe-Duty Monitor have a one () year warranty. Select Akron Brass handline nozzles and valves carry a ten (0) year warranty. Scene Star Lights carry a () year warranty. Weldon products have a two () year warranty from date of manufacture (excluding consumable components). Select Weldon LED products carry a five () year warranty. Honda products 0 Akron Brass Company. All rights reservered. No portion of this can be reproduced without the express written consent of the Akron Brass Company. D
4 STYLE 0-0- PRODUCT MERCURY MASTER 000 ASSEMBLY NOTES: USE PARKER O-LUBE ON ALL O-RINGS AND MATING SURFACES, UNLESS OTHERWISE NOTED. 0 " SWIVEL BALLS -/ - " SWIVEL BALLS ALL VIEWS SHOWN WITH SHUT-OFF BALL OPEN. USE PERMABOND LM OR LOCTITE. USE PRIMER T AND PERMABOND HH0 OR LOCTITE. DO NOT USE PARKER O-LUBE. USE LOW-TEMP LUBRIPLATE. DIMPLE AT ASSEMBLY. 0 USE PERMABOND LH00 OR LOCTITE. HANDWHEEL ROTATES COUNTER CLOCKWISE TO OPEN AND CLOCKWISE TO CLOSE. CLEAN WITH ALCOHOL. USE PERMABOND MM. TORQUE TO FT.LBS. 0 0 " SWIVEL BALLS EACH." SWIVELS BALLS EACH " - -/" - " SWIVEL INLET " SWIVEL AND." SWIVEL BALLS x 0 BRACKET ASSEMBLY DUAL INLET SECTION A-A PHONE: 0.. or 00.. I FAX: 0.. or WARRANTY AND DISCLAIMER*: We warrant Akron Brass products for a period of five () years* after purchase against defects in materials or workmanship. Akron Brass will repair or replace product which fails to satisfy this warranty. Repair or replacement any cause whatsoever. No person has authority to change this warranty. *Unless otherwise provided herein. Akron Brass industrial electronic components & the Severe-Duty Monitor have a one () year warranty. Select Akron Brass handline nozzles and valves carry a ten (0) year warranty. Scene Star Lights carry a () year warranty. Weldon products have a two () year warranty from date of manufacture (excluding consumable components). Select Weldon LED products carry a five () year warranty. Honda products 0 Akron Brass Company. All rights reservered. No portion of this can be reproduced without the express written consent of the Akron Brass Company. D
5 STYLE 0-0- PRODUCT MERCURY MASTER 000 Find Description Item QTY GAUGE PRESSURE 0-0 LBS SPIKE GROUND 000 SCREW HEX HEAD /- X " WASHER BELLEVILLE D PLUG SWIVEL / - X /" - 0 O-RING - OUTLET 00 BALL OUTLET 0 BODY 00 B SPRING - SPRING LATCH B SPRING WEDGE - B PIN ROLL/ X /LG - B PIN ROLL / X /LG - 0 B HOUSING HANDLE - B END CLEVIS - B HOLDER SPRING - B GUIDE SPRING - B SHAFT - B WEDGE LATCH - B PLATE LATCH - LEG RIGHT LEG LEFT 0 TRUNNION 0 O-RING - A SEAT VALVE - A O-RING - - RING RETAINER A O-RING - - LABEL CCW "OPEN" A BALL " - PIN ROLL 0 0 SCREW HEX HEAD /- X -/" 0 GEAR SECTOR HOUSING GEAR 00 SCREW SOCKET HEAD CAP / -0 X /" 0 PIN HANDWHEEL HANDLE 0 BUSHING." 0 HANDWHEEL " 0 PIN ROLL 0 SHAFT HANDWHEEL TRUNNION ACTUATOR 0 0 SPACER GEAR A O-RING - - FITTING GREASE /- 0 A O-RING -0 - TRUNNION THREADED PLATE COVER 00 SCREW HEX HEAD CAP / - X /" 0 PHONE: 0.. or 00.. I FAX: 0.. or WARRANTY AND DISCLAIMER*: We warrant Akron Brass products for a period of five () years* after purchase against defects in materials or workmanship. Akron Brass will repair or replace product which fails to satisfy this warranty. Repair or replacement any cause whatsoever. No person has authority to change this warranty. *Unless otherwise provided herein. Akron Brass industrial electronic components & the Severe-Duty Monitor have a one () year warranty. Select Akron Brass handline nozzles and valves carry a ten (0) year warranty. Scene Star Lights carry a () year warranty. Weldon products have a two () year warranty from date of manufacture (excluding consumable components). Select Weldon LED products carry a five () year warranty. Honda products 0 Akron Brass Company. All rights reservered. No portion of this can be reproduced without the express written consent of the Akron Brass Company. D
6 STYLE 0-0- PRODUCT MERCURY MASTER 000 Find Description Item QTY SCREW SOCKET HEAD CAP NYLON PATCH -X/" WASHER # 0 WASHER FLAT 0 SCREW ALLEN HEAD / -0 X /" 00 BALL / OD NYLON 00 WASHER THRUST 0 WORM GEAR 0 TRUNNION BRAKE ROTATIONAL SPACER CAP ROTATIONAL 0 SPACER ROTATIONAL 0 O-RING -0 PIN FRICTION BRAKE SPRING O-RING - 0 O-RING - 0 SCREW SOCKET HEAD CAP / -0 X /" 0 O-RING WASHER GLASS FILLED DELRIN BAND ID 00 C PIN CLAPPER AXIS - C SPACER CLAPPER - C SCREW CLAPPER - 0 C DISC VALVE - C ARM CLAPPER - PLATE ID NAIL GRIP 0 C BRACKET CLAPPER VALVE - SCREW HEX HEAD CAP/- X /" 0 WASHER FLAT / 0 0 TAG VALVE ACTUATOR 0 STRAP ASSEMBLY WITH BOLT PLATE & HOOK 00 0 SCREW SOCKET HEAD CUP POINT SET / -0 X /" 00 0 B BEARING NYLINER /" - OUTLET WITH SHAPER 0 * GASKET ADAPTER - SCREW SOCKET HEAD CUP POINT SET / -0 X /" 00 * ADAPTER SPECIAL THREAD - BRACKET BEARING 0 TRUNNION 00 BRACKET MOUNTING 0 0 BRACKET LATCH ASSEMBLY 0 0 SCREW ROUND HEAD SLOTTED #0- X /" 0 INLET SIZE FIND DESCRIPTION.. SWIVEL NH (ITEM No) O-RING O-RING D / BALL QTY'S SEE DRAWING VIEWS FOR QUANTITIES INLET ADAPTER (ITEM No.) STORZ FITTING GASKET DUAL INLET (ITEM No) * CONTACT CUSTOMER SERVICE. A FIELD SERVICE KIT 000 B REPAIR KIT 00 C CLAPPER VALVE S/A 0 D KIT OF 0 BALLS /" ST. STL. 00 PHONE: 0.. or 00.. I FAX: 0.. or WARRANTY AND DISCLAIMER*: We warrant Akron Brass products for a period of five () years* after purchase against defects in materials or workmanship. Akron Brass will repair or replace product which fails to satisfy this warranty. Repair or replacement any cause whatsoever. No person has authority to change this warranty. *Unless otherwise provided herein. Akron Brass industrial electronic components & the Severe-Duty Monitor have a one () year warranty. Select Akron Brass handline nozzles and valves carry a ten (0) year warranty. Scene Star Lights carry a () year warranty. Weldon products have a two () year warranty from date of manufacture (excluding consumable components). Select Weldon LED products carry a five () year warranty. Honda products 0 Akron Brass Company. All rights reservered. No portion of this can be reproduced without the express written consent of the Akron Brass Company. D
TECHNICAL SERVICE PARTS
R STYLE, 0-0- INLET USE PERMABOND LM OR LOCTITE. USE MOBILITH SHC 0. OUT PLUG /-/ TURN. TIGHTEN UNTIL SLIGHT DRAG IS ON ITEM. 5 0 x 0 x USE PRIMER T AND PERMABOND HH0 OR LOCTITE. x 0 5 0 0 AND MATING PART
More informationTECHNICAL SERVICE PARTS
STYLE, 0 0-0- USE PERMABOND LM OR LOCTITE USE LOCTITE 0 USE SIKAFLEX-A SEALANT 0 0 USE ONLY ON U VERSIONS (XXX DENOTES U VERSIONS) USE PERMABOND LH00 OR LOCTITE TOUCHES BALL. THEN BACK OUT PLUG /-/ TURN.
More informationTECHNICAL SERVICE PARTS R STYLE 3480, 3482
STYLE 0, 0- - USE PAKE O-LUBE ON ALL O-INGS AND MATING SUFACES UNLESS OTHEWISE NOTED. USE PEMABOND LM O LOCTITE. USE PIME T AND PEMABOND HH0 O LOCTITE. USE MOBILITH SHC0. THOOUGHLY COAT WITH NEVE SEEZ
More informationEquipment Catalog. For inquiries and orders, please contact:
Equipment Catalog 1 2 Table of contents...pages Force Flow 100 Lube Pump... 4 Bucket Pumps... 5 Packing Injection Fitting Body Vent (Bleeder) Fittings... 6 1200 & 1500 Lube Pumps... 7 Hose Assemblies Gages
More informationDESCRIPTION UOM KEI# OEM#
ADAPTOR SCREW EA. AS-1070 755A010 AIR HOSE, NYLON AMERICAN STYLE, 20" EA. AS-3563 ---------- AIR HOSE, NYLON EUROPEAN STYLE, 20" EA. AS-3564 AIR HOSE, STAINLESS STEAL AMERICAN STYLE, 20" EA. AS-3565 ----------
More informationSuffix for Disc Material Size A B C I.D. O.D. B.C. Holes Black White
Wet-R-Dri Valve A TA STYLE LIGHTWEIGHT COMPACT VERSATILE B I.D. Size Standard Model Detent Model Standard Material Max. Working Body Disc Pressure WD00 AL B. WD0 AL B. Aluminum WD00 GI B. WD0 GI B. Grey
More informationModels FWB, LWB, MWB and HWB Brakes AIR CHAMP PRODUCTS. User Manual. (i) MTY (81)
DIST. AUTORIZADO AIR CHAMP PRODUCTS User Manual Models FWB, LWB, MWB and HWB Brakes (i) DIST. AUTORIZADO In accordance with Nexen s established policy of constant product improvement, the specifications
More informationSERVICE PARTS LIST SPECIFY CATALOG NO. AND SERIAL NO. WHEN ORDERING PARTS. 120V Permanent Magnet Drill STARTING SERIAL NUMBER.
69(5x) CATALOG NO. SERVICE PARTS LIST SPECIFY CATALOG NO. AND SERIAL NO. WHEN ORDERING PARTS 120V Permanent Magnet Drill 2-20 STARTING SERIAL NUMBER G85A BULLETIN NO. 5-6-00 REVISED BULLETIN DATE Apr.
More informationDOORS/HATCHES DOORS/HATCHES LET US KNOW YOUR REQUIREMENTS WATERTIGHT DOORS HATCHES SCUTTLES PORT LIGHTS PHONE FAX
DOORS/HATCHES WATERTIGHT DOORS HATCHES SCUTTLES PORT LIGHTS LET US KNOW YOUR REQUIREMENTS 7 #00 -DOG FUMELIGHT DOOR #0 4-DOG WEATHERTIGHT DOOR #0 6-DOG WATERTIGHT DOOR #0 6-DOG SQUARE CORNER DOOR #04 6-DOG
More informationSERVICE PARTS LIST DEEP CUT AC/DC BANDSAW D52C BULLETIN NO CATALOG NO SEE PAGE 3 FOR FASTENER TORQUE CHART
= Part number change from previous service parts list. SPECIFY CATALOG NO. AND SERIAL NO. WHEN ORDERING PARTS DEEP CUT AC/DC BANDSAW CATALOG NO. 623-20 SERVICE PARTS LIST STARTING SERIAL NO. D2C REVISED
More informationMODEL 185R Kontrol-Karrier Operator s Manual for Morse Kontrol-Karrier
Contents Page Receiving Procedures.................... 1 Warranty............................. 1 Safety Information..................... 1-2 Machine Description................... 3 Operating Instructions....................
More information443C. Parts Manual. MM Rev. 05 (06 93)
443C Parts Manual MM294 578-748 Rev. 05 (06 93) This manual is furnished with each new TENNANT Model 443C. This manual consists of the Standard Parts; Options; Breakdowns; and Cross Reference sections.
More informationBUSH HOG LAND MAINTENANCE REPAIR PARTS MANUAL MODELS: HS1736B, HS1742B, HS1836B, HS1842B, HS2036K, HS2042K HOME SERIES ZERO TURN MOWER SECTION: 85
BUSH HOG LAND MAINTENANCE REPAIR S MANUAL MODELS: HSB, HSB, HSB, HSB, HS0K, HS0K HOME SERIES ZERO TURN MOWER SECTION: 0 Griffin Ave. Selma, AL 0 () -00 Parts Ordering -00-0- Fax -00-- www.bushhog.com OCTOBER,00
More informationSERVICE PARTS LIST SPECIFY CATALOG NO. AND SERIAL NO. WHEN ORDERING PARTS. M18 FUEL 1-1/2" Linemen Magnetic Drill CATALOG NO. STARTING SERIAL NUMBER
(7x) 48 4 SERVICE PARTS LIST SPECIFY CATALOG NO. AND SERIAL NO. WHEN ORDERING PARTS M18 FUEL 1-1/2" Linemen Magnetic Drill CATALOG NO. 7 7 2788-20 77 83(3x) STARTING SERIAL NUMBER 144 79 G7A REVISED BULLETIN
More informationSERVICE PARTS LIST BULLETIN NO M18 FUEL 1-1/2" Magnetic Drill CATALOG NO. G96A
65(7x) 48 64 CATALOG NO. SERVICE PARTS LIST SPECIFY CATALOG NO. AND SERIAL NO. WHEN ORDERING PARTS M18 FUEL 1-1/2" Magnetic Drill 67 76 2787-059 77 83(3x) STARTING SERIAL NUMBER 79 G96A Torque Chart on
More informationPARTS CATALOG 6000/6001 ELITE SERIES SURGICAL TABLES INCLUDING BATTERY MODELS
PARTS CATALOG 6000/6001 ELITE SERIES SURGICAL TABLES INCLUDING BATTERY MODELS Page i 1. TOP & SIDE FRAME ASSEMBLIES, 6001.... PAGE 2 2. TOP & SIDE FRAME ASSEMBLIES, 6000.... PAGE 6 3. SIDE FRAME & HYDRAULIC
More information83R-200 Series FEATURES STANDARD MATERIAL LIST
83R-200 Series Carbon Steel 3-Piece Full Port Socket Weld Ball Valve With Actuator Ready ISO Mounting Pad 1-1/2 & 2 Socket Weld, 800 psig CWP, Cold Non-Shock. 150 psig Saturated Steam. Vacuum Service to
More informationHT210 HAY TEDDER PARTS MANUAL SECTION 16
HT210 HAY TEDDER Published 04/11 PARTS MANUAL SECTION 16 MATERIAL HANDLING PARTS MANUAL PARTS ORDERING GUIDE The following instructions are offered to help eliminate needless delay and error in processing
More informationSERVICE PARTS LIST DEEP CUT BANDSAW D51C BULLETIN NO CATALOG NO SEE PAGE 3 FOR FASTENER TORQUE CHART
= Part number change from previous service parts list. SPECIFY CATALOG NO. AND SERIAL NO. WHEN ORDERING PARTS DEEP CUT BANDSAW CATALOG NO. 232-20 SERVICE PARTS LIST STARTING SERIAL NO. D5C REVISED BULLETIN
More informationSERVICE PARTS LIST DEEP CUT BANDSAW D51B BULLETIN NO CATALOG NO SEE PAGE 3 FOR FASTENER TORQUE CHART
= Part number change from previous service parts list. SPECIFY CATALOG NO. AND SERIAL NO. WHEN ORDERING PARTS DEEP CUT BANDSAW CATALOG NO. 232-20 SERVICE PARTS LIST STARTING SERIAL NO. D5B REVISED BULLETIN
More informationOperation and Maintenance Manual. Joyce/Dayton Metric Screw Jacks
Joyce/Dayton Corp. Operation and Maintenance Manual Joyce/Dayton Metric Screw Jacks WARNING! The product described in this catalog is for industrial use only. It may not be used to lift or support people
More informationSERVICE PARTS LIST. 7/8" (22mm) SDS ROTARY HAMMER. ABH-22 A002A See page 5 BULLETIN NO. A CATALOG NO.
00 0 EXAMPLE: Component Parts (Small #) Are Included When Ordering The Assembly (Large #). SERVICE PARTS LIST SPECIFY CATALOG NO. AND SERIAL NO. WHEN ORDERING PARTS 7/8" (22mm) SDS ROTARY HAMMER CATALOG
More informationCR-3000 Car Rotator Capacity 3,000 lbs Installation Manual 2016 Mar
Car Rotator Capacity 3,000 lbs Installation Manual 2016 Mar INDEX 1. OWNER / USER RESPONSIBILITIES---------------------------------------- PAGE 3 2. SAFETY PROCEDURES---------------------------------------------------------
More informationBSR8 HAY RAKE BSR10 HAY RAKE BSR12 HAY RAKE SUSPENSION RAKE PARTS MANUAL SECTION 40
BSR8 HAY RAKE BSR0 HAY RAKE BSR HAY RAKE SUSPENSION RAKE Published 08/5 - Revised 08/8 MATERIAL HANDLING PARTS MANUAL PARTS MANUAL SECTION 0 PARTS ORDERING GUIDE The following instructions are offered
More informationOperating Instructions
Operating Instructions A-2600 SERIES AWWA SWING CHECK VALVE 500 West Eldorado Street Decatur, Illinois 62522 www.muellercompany.com! WARNING! 1. Read and follow all pertinent instructions carefully. Proper
More information2 5 0 P. S. I. G. AMERICAN DARLING 5 1 /4" B-84-B FIRE HYDRANT
2 5 0 P. S. I. G. AMERICAN DARLING 5 1 /4" B-84-B FIRE HYDRANT CONSTRUCTION OPERATING NUT-cast one piece bronze operating nut. Design of the operating thread permits slow closing of the hydrant valve,
More informationPO Box 1200 Phone (205) Commerce Drive Fax (205) Winfield, Alabama PARTS MANUAL.
PO Box 100 Phone (05)87-0 05 Commerce Drive Fax (05)87-05 Winfield, Alabama 559 XB PARTS MANUAL www.kingkutter.com CONTENTS Page Middle Buster/ Sub Soiler -------------------------------------------------------
More informationRS2650B ZERO TURN MOWER
RS2650B ZERO TURN MOWER Published 10/12 PARTS MANUAL SECTION 99 An Operator s Manual was shipped with the equipment. The Operator s Manual is an integral part of the safe operation of this machine and
More informationB Illustrated Parts List S S S. Tank. Using the Illustrated Parts List
B1-10. Illustrated Parts List To order parts, call the Nordson Customer Service Center or contact your Nordson representative. Use the parts lists and accompanying illustrations in this section to locate
More information13 Lock tab washer 304 SS 14 Lever and grip Stl-zinc plt-w/vinyl PRODUCT NUMBER
83R-240 SERIES Carbon Steel 3-Piece Full Port Socket Weld Ball Valve With Actuator Ready ISO Mounting Pad 1.5 & 2 Socket Weld, 800 CWP (psig), Cold Non-Shock. 150 psig Saturated Steam. Vacuum Service to
More informationModule. Table of Contents. Section 9. Module NOTE: This section applies to applicators with UM50 modules.
9- Section 9 NOTE: This section applies to applicators with UM50 modules. Table of Contents... 9- Introduction... 9-2 Overview... 9-3 Pattern Control Troubleshooting... 9-4 Service... 9-5 Replacing a...
More informationWorld Class Bellows Seal Valves
World Class Bellows Seal Valves Fugitive Emissions Sealing High Cycle Bellows In-Line Servicing High Flow Capacity Conval Bellows Seal Valves meet all of the rigorous requirements of MSS SP-117, ensuring
More informationTo Contact PS DOORS:
MODELS Stainless Steel (SS) Powder Coat Yellow (PCY) Hot Dipped Galvanized (GAL) TABLE OF CONTENTS PAGE Warranty Information General Paired LSG Information Installing the Support Channels 3 Installing
More informationSEMPELL HP PREHEATER PROTECTION VALVES TYPE AVS 4/5
Typical feed water heater isolation system FEATURES Body of forged steel Body in form piece to reduce a number of welds and fittings Body also available as a single block type thereby eliminating the nozzle
More informationMFG. CO. INC. Model No. Serial No. For Serial Nos. 440,000 & Higher
For Serial Nos. 440,000 & Higher MFG. CO. INC. TM on the purchase of your new Exmark equipment. This product has been carefully designed and manufactured to give you a maximum amount of dependability and
More informationArms Group Drainage System. 1. Swivel Joint Type 2. Pivot Joint Type 3. Flexible Hose Type 4. Swing Master Joint Type 5. Floating Check Valve
Arms Group Drainage System 1. Swivel Joint Type 2. Pivot Joint Type 3. Flexible Hose Type 4. Swing Master Joint Type 5. Floating Check Valve Swivel Joint Type Model No. 1010 Sizes 3in through 8in Heavy
More informationP133 Pressure Regulator
P33 Pressure Regulator Suitable for Monitoring Balanced Supply Valve Wide Pressure Range Offering The P33 is a direct operated pressure reducing regulator with external pressure registration used in commercial
More informationPRODUCTS AIR CHAMP. User Manual. Diaphragm Brake. 4", 8" and 12" Hinge Top Diaphragm Brake FORM NO. L M-0914 FORM NO.
AIR CHAMP PRODUCTS User Manual Diaphragm Brake 4", 8" and 12" Hinge Top Diaphragm Brake i In accordance with Nexen s established policy of constant product improvement, the specifications contained in
More informationCROSBY H-SERIES DIRECT SPRING SAFETY VALVES
DIRECT SPRING SAFETY VALVES Direct spring safety valves that provide comprehensive overpressure protection for ASME Boiler and Pressure Vessel Code Section I, and Section VIII steam safety applications
More informationOWNER'S MANUAL. Drum Handling Solutions DRUM CARRIER / ROTATOR SERIES DCR-205
VESTIL MANUFACTURING CORPORATION 999 North Wayne St., Angola, IN 70 Phone (0) -78 Fax (0) -9 E-mail: sales@vestil.com www.vestil.com Drum Handling Solutions Contents Warnings and Safety Instructions...
More informationMade in USA TRUNNION MOUNTED BALL VALVE INSTALLATION, MAINTENANCE, & REPAIR MANUAL
Made in USA TRUNNION MOUNTED BALL VALVE INSTALLATION, MAINTENANCE, & REPAIR MANUAL Corporation 3245 S. Hattie Oklahoma City, Oklahoma 73129 Telephone: (405) 677-3321 Fax: (405) 677-3917 Email:Balon@balon.com
More informationTable of contents Copyright ANDREAS STIHL AG & Co. KG 2017 (2)
03-2016 D-GB Table of contents Copyright ANDREAS STIHL AG & Co. KG 2017 (2) 11.10.2017 Table of contents MS 150 TC 4 Cylinder with piston, Ignition system 6 Motor housing 9 Oil pump, Clutch 11 Chain sprocket
More informationProperty of American Airlines
Date: October 12, 2015 MALABAR INTERNATIONAL AIRCRAFT MAINTENANCE & SUPPORT EQUIPMENT READ AND SAVE THIS INSTRUCTION MANUAL OWNER S MANUAL FOR MALABAR MODEL For Service & Spare Parts, Please Contact: 8923
More information1470 Dale Court Austell, GA Phone: Fax:
1470 Dale Court Austell, GA 30168 Phone: 404-351-2202 Fax: 404-351-2203 LC METALS, INC. PRODUCT INDEX Page # STUD GUARDS...3 FHA STRAPS...3 BOCA PLATES (Nail Plates)...4 PLUMBERS TAPE (Banding Iron)...4
More informationK&T Saw Shop or
www.ktoutdoor.com 11-400043B MAC POWER-PRO 1500E 04/84 to 07/86 IPL 218542 Page 1 of 40 Air Cleaner, Muffler K&T Saw Shop 606-678-9623 or 606-561-4983 K&T Saw Shop 606-678-9623 or 606-561-4983 www.ktoutdoor.com
More informationDIAPHRAGM BRAKES MODELS ''J'' AND ''K''
DIAPHRAGM BRAKES MODELS ''J'' AND ''K'' 1 FORM NO. L-20012-M-0814 In accordance with Nexen s established policy of constant product improvement, the specifications contained in this manual are subject
More informationBid Opportunity PLUMBING SYSTEMS Section Installation of Boiler Heating Systems Page 1 of 7 Centennial Pool, 90 Sinclair
Installation of Boiler Heating Systems Page 1 of 7 SECTION PAGE PART 1 GENERAL 2 1.1 General 2 1.2 Reference 2 1.3 Work Included 2 1.4 Related Work Specified Elsewhere 2 PART 2 PRODUCTS 3 2.1 Pipe and
More informationPARTS MANUAL SECTION 17
HT417/HT417H HAY TEDDER Published 05/12 PARTS MANUAL SECTION 17 MATERIAL HANDLING PARTS MANUAL An Operator s Manual was shipped with the equipment. The Operator s Manual is an integral part of the safe
More informationSingle Stacker Operational Manual
Single Stacker Operational Manual Document #0-0008 //05 TABLE OF CONTENTS I. INTRODUCTION... 4 Compatibility... 4 Validator... 4 Operation... 4 II. INSTALLATION... 5 Front Load Cabinet... 5 Rear Load Cabinet...
More informationTEW MX MULTI-SEED VEGETABLE SEED PLANTER
TEW MX MULTI-SEED VEGETABLE SEED PLANTER The TEW Multi-Seed planters are built around a time tested design for both seeding & fertilizer applications. This style planter has always been known as the pumpkin/squash
More information1071 Cast Steel Globe Steam Stop Valve (Flanged)
1071 Cast Steel Globe Steam Stop Valve (Flanged) Flanged Ends to DIN 2545 PN 40. Straight Pattern, Outside Screw, Yoke Type, Rising Stem, Bolted Bonnet. Renewable 13% Cr. Stainless Steel (S.S 410) working
More informationOperation & Service Manual
Operation & Service Manual Model: 13-6609-6610 Ground Test Tool Boeing 787 Ram Air Turbine 10/2009 Rev. 01 Includes Illustrated Parts Lists DEVELOPED IN CONJUNCTION WITH HAMILTON-SUNDSTRAND 1740 Eber Rd
More informationVALVES & MEASUREMENT. NUTRON TT/TM/TL Forged Steel Trunnion Mounted Ball Valves NUTRON
NUTRON TT/TM/TL Forged Steel Trunnion Mounted Ball Valves NUTRON 2 NUTRON TABLE OF CONTENTS NUTRON tt/tm/tl Forged steel trunnion mounted ball Valves Introduction... 5 MODEL TT Specifications and Compliances...
More informationOPERATION MANUAL BISON LIFTER (ABL150)
ABACO MACHINES OPERATION MANUAL BISON LIFTER (ABL150) ABACO MACHINES (USA) 14508 S. Garfield Ave., Paramount, CA 90723, USA Tel : 310-532-0366 Fax : 310-532-0499 Email : sales@abacomachines.com Website
More informationInstruction Manual HK285. Note: The Owner/Operator must read carefully and understand all the information presented here before operation.
Instruction Manual HK285 Note: The Owner/Operator must read carefully and understand all the information presented here before operation. Contents Warnings and Safety Instructions 1 Receiving Instructions
More informationPS-4045 Adjustable-Height Pallet Stand Use and Maintenance Manual
Vestil Manufacturing Co. 2999 North Wayne Street, P.O. Box 507, Angola, IN 46703 Telephone: (260) 665-7586 -or- Toll Free (800) 348-0868 Fax: (260) 665-339 http://www.vestilmfg.com/ e-mail: sales@vestil.com
More informationTypical Feed Water Heater Isolation System.
Typical Feed Water Heater Isolation System. Features and Benefits In the event of a defective tube system these valves are designed to stop the feed of high pressure feedwater and to bypass it around a
More informationMaterials Materials Threaded End Connection Extension, flange and nipples for flanged and socket-weld connections are not shown.
19000 Materials Materials 15 6 9 10 14 7 8 5 7 3 2 4 1 19000-2 Threaded End Connection Extension, flange and nipples for flanged and socket-weld connections are not shown. 19000.5 19000 (SRV-1/Q3.01) 19000
More informationPLC-P-FM Manual Pail Lid Closing Press Instruction Manual
Vestil Manufacturing Co. 2999 North Wayne Street, P.O. Box 507, Angola, IN 46703 Telephone: (260) 665-7586 -or- Toll Free (800) 348-0868 Fax: (260) 665-1339 Web: www.vestilmfg.com e-mail: info@vestil.com
More informationEdition 4 July QA33 Air Angle Wrench. Parts Information. Save These Instructions
8070632 Edition 4 July 2006 QA33 Air Angle Wrench Parts Information Save These Instructions Module Diagram 8 7 5 6 2 2 20 8 9 3 9 0 4 2 33 35 3 4 5 34 6 28 7 36 22 29 37 23 38 24 32 25 30 26 3 27 (Dwg.
More informationModel 185A Kontrol-Karrier
Contents Page Receiving Procedures.................... 1 Warranty............................. 1 Safety Information..................... 1-2 Machine Description................... 3 Operating Instructions....................
More informationKEEP FOR FUTURE REFERENCE MRT FORKLIFT ADAPTER READ ALL INSTRUCTIONS AND WARNINGS BEFORE USING THIS PRODUCT
KEEP FOR FUTURE REFERENCE P.O. Box 368 908 West Main Laurel, MT USA 59044 phone 800-548-7341 phone 406-628-8231 fax 406-628-8354 INSTRUCTIONS International Version STOCK NUMBER: 95722 MRT FORKLIFT ADAPTER
More informationAvailable End Connections & Size Range
ECCENTRIC PLUG VALVES Size Range 3"-24" Water Working Hydrostatic Size Range Pressure psi Test psi 3"-12" 175 350 14"-24" 150 300 Available End Connections & Size Range Figure No. Flanged 3"-24" F-5412
More informationMODEL 3200 / 3201 CONTENTS. Installation, Operation, and Maintenance Instructions 1.0 GENERAL 2.0 INSTALLATION 3.0 OPERATION 4.
Installation, Operation, and Maintenance Instructions MODEL 3200 / 3201 March 2002 CONTENTS 1.0 GENERAL 1.1 Model Number ----------------------------------------------------------------------------------------------
More informationMODEL 3200 / 3201 CONTENTS. Installation, Operation, and Maintenance Instructions 1.0 GENERAL 2.0 INSTALLATION 3.0 OPERATION 4.
Installation, Operation, and Maintenance Instructions MODEL 3200 / 3201 March 2002 CONTENTS 1.0 GENERAL 1.1 Model Number ----------------------------------------------------------------------------------------------------------
More informationA Resource for Semiconductor Manufacturers. Illustrated Parts Guide for Varian VIISion 80, 80+, & 200
Illustrated Parts Guide for Varian VIISion 0, 0+, & 00 00--99 sales@glemco.com www.glemco.com G-0-0AH Rev0 Components for Varian VIIsion Source 00--99 sales@glemco.com www.glemco.com G-0-0AH Rev0 Components
More informationMODEL 185A Kontrol-Karrier
Contents Page Receiving Procedures.................... 1 Warranty............................. 1 Safety Information..................... 1-2 Machine Description................... 3 Operating Instructions....................
More information12.1 MUELLER TAPPING MATERIALS AND SPECIALTY VALVES. MUELLER Tapping Sleeves and Crosses. MUELLER Tapping Valves. MUELLER Stainless Steel Tapping
MUELLER TAPPING MATERIALS AND SPECIALTY VALVES 12.1 Shaded area indicates change Rev. 7-16 MUELLER Tapping Sleeves and Crosses Full range of Tapping Sleeves and Crosses to fit most types of pipe including
More informationPARTS MANUAL LKO-100D ORANGE PEEL GRAPPLES V12153 X
PARTS MANUAL LKO-00D ORANGE PEEL GRAPPLES V5 X TABLE OF CONTENTS LKO-00D ORANGE PEEL GRAPPLE Information Identification Number ---------------------------------------- Nomenclature ---------------------------------------------------
More information2815, , 12810
2815,2810 12815, 12810 FLEX WING ROTARY CUTTER Published 0/12 PARTS MANUAL SECTION 95 An Operator s Manual was shipped with the equipment. The Operator s Manual is an integral part of the safe operation
More informationOwner s Manual Calcite Cartridge System
Owner s Manual Calcite Cartridge System Page 2 Copyright 2011 Enviro Water Solutions, Inc. All rights reserved. All information contained herein is the property of Pelican Water Technologies. Pelican Water
More information4 1 /2 MARK 73-5 AMERICAN FLOW CONTROL. It s What We Know. AMERICAN-DARLING FIRE HYDRANT AMERICAN-DARLING 4 1 /2 MARK 73-5 FIRE HYDRANT
AMERICAN-DARLING FIRE HYDRANT AMERICAN-DARLING FIRE HYDRANT AMERICAN FLOW CONTROL It s What We Know. CONSTRUCTION AMERICAN-DARLING FIRE HYDRANT OPERATING NUT Cast one-piece bronze operating nut. Design
More informationGeneral Purpose Engine
General Purpose GX160K1 ( QX2, VOLUME 2 OF 2) Parts Catalog APRIL, 2004 American Honda Motor Co., Inc. 2004 American Honda Motor Co., Inc. TABLE OF CONTENTS Introduction Grid / Page HOW TO USE THIS CATALOG...
More informationRHE3 Dock Leveler Installation Manual
RHE3 Dock Leveler Installation Manual MADE IN U.S.A. This Manual Covers Dock Levelers Built After Serial Numbers: 07FE160001M and up PRINTED IN U.S.A. RITE-HITE PRINT SHOP PUBLICATION NO. 1222 MAY 2007
More informationMeter, PD Series, H8-S1, S3, S5, S6 and S7
PARTS LIST Meter, PD Series, H8-S1, S3, S5, S6 and S7 Bulletin PO01010 Issue/Rev. 0.2 (1/18) 2 Bulletin PO01010 Issue/Rev. 0.2 (1/18) Item Description Quantity Part Number H8-S1 H8-S3, S5 H8-S6, S7 1 Adapter
More informationTriple offset valve with metallic seat for High performance. Class 300: 6 to 36 (DN 150 to 900) Design in accordance with EN and ASME B16-34
Type series booklet 8613.1783/4--EN Triple offset valve with metallic seat for High performance Class 300: 6 to 36 (DN 150 to 900) Design in accordance with EN 12516 and ASME B16-34 Applications LNG process
More informationClass 125S/200WOG Bronze Gate Valve Non-Rising Stem, Threaded Ends Testing: BS EN 12288, BS 5154, BS EN Working Pressure: PN16
Class 125S/200WOG Bronze Gate Valve Non-Rising Stem, Threaded Ends Testing: BS EN 12288, BS 5154, BS EN 12266 Working Pressure: PN16 FIG. 201 WORKING PRESSURE Working Pressure Non-Shock (psi) Saturated
More informationSERVICE PARTS LIST SPECIFY CATALOG NO. AND SERIAL NO. WHEN ORDERING PARTS CORDLESS 18V COMPACT BAND SAW STARTING C14A SERIAL NO.
00 0 EXAMPLE: Component Parts (Small #) Are Included When Ordering The Assembly (Large #). FIG. PART NO. DESCRIPTION OF PART NO. REQ. 0-- 0- x /" Pan Hd. Tapt. T- Screw () 0--00 M Pan Hd. T-0 Screw ()
More informationK&T Saw Shop or
www.ktoutdoor.com 11-400044B MAC POWER-PRO 2300E 04/84 to 07/86 IPL 218543 Page 1 of 40 Air Cleaner, Muffler K&T Saw Shop 606-678-9623 or 606-561-4983 K&T Saw Shop 606-678-9623 or 606-561-4983 www.ktoutdoor.com
More informationBox Rail. Single Box Rail Bracket
HANGERS & RAILS Box Rail Accordion Door Hangers Max. Door Weight (SWL) 450 lbs Meets ANSI/BHMA A156.14, Grade 1. Rail is carefully formed to give an even tread to hanger wheels. Packaging: Bundled without
More informationAMERICAN DARLING 5 1 /4" B-62-B FIRE HYDRANT
AMERICAN DARLING 5 1 /4" B-62-B FIRE HYDRANT CONSTRUCTION PIPE PLUG-provides access to lubrication chamber. Pipe plug can be replaced with lubricating fitting to lubricate the rod threads and thrust washers.
More information[WICB103CV1WC] BACKSPLASH & COIN BOX ASSEMBLY
[WICB103CV1WC] BACKSPLASH & COIN BOX ASSEMBLY [WICB103CV1WC] CABINET, COVER & FRONT PANEL [WICB103CV1WC] TUB, BASKET & AGITATOR [WICB103CV1WC] SUSPENSION, PUMP & DRIVE COMPONENTS Model: WICB103CV1WC 2/17/2000
More information3.3 HP 111- E HIGH-PERFORMANCE BUTTERFLY VALVE HP 111- E TECHNICAL DATA
Wafer type butterfly valve in double-eccentric construction. Reliable sealing even with extreme temperature and pressure conditions. TECHNICA DATA Nominal diameter: 0 larger nominal diameter on request
More informationFIXED CEILING COLUMN. Installation Manual FIXED CEILING COLUMN
FIXED CEILING COLUMN Installation Manual FIXED CEILING COLUMN INTRODUCTION Location, sequence of services and orientation of Surgical Ceiling Columns are specified on the building plans. Be certain installation
More informationπ H-7211 AUTOMATIC SEALLESS COMBO STRAPPING TOOL uline.com Options , 153
120 139 66 137 136 130 68 5 39 38 35 9 8 11 50 124 147 135 12 13 128 12 22 119 40 43 44 21 14 1 46 41 47 83 19 17 23 25 24 10 Options 150 151 24 145 138 79 86 3 31 43 56 2 2 30 55 29 28 26 32 24 102 108
More informationHIGH MAST CAMERA POLE ASSEMBLY GENERAL
10-3.24 HIGH MAST CAMERA POLE ASSEMBLY GENERAL The Contractor must furnish and install the following equipment for high mast camera pole assembly as described herein and as shown on the plans: 1. Camera
More informationOperator s Manual for Morse Kontrol-Karrier with Spark Resistant Parts and Air Power Tilt
Contents Page Receiving Procedures.................... 1 Warranty............................. 1 Safety Information..................... 1-2 Machine Description................... 2 Assembly Instructions..................
More informationDAKE COMPOUND LEVERAGE ARBOR PRESS. Model 4 INSTRUCTIONAL MANUAL
DAKE COMPOUND LEVERAGE ARBOR PRESS Model 4 INSTRUCTIONAL MANUAL WARNING! Read and understand all instructions and responsibilities before operating. Failure to follow safety instructions and labels could
More information3.3 HP 111- E HIGH-PERFORMANCE BUTTERFLY VALVE HP 111- E. TECHNICAL DATA
HIGH-PERFORMANCE BUTTERFY VAVE HP 111- E Wafer type butterfly valve in double-eccentric construction. Reliable sealing even with extreme temperature and pressure conditions. TECHNICA DATA Nominal diameter:
More informationORBIT Valves STANDARD FEATURES
ORBIT Valves STANDARD FEATURES Cameron s ORBIT valves are ideal for applications when zero leakage and frequent operation are demanded. They are used globally in gas processing plants using molecular sieve
More informationIron Check Valves & Y-Strainers Illustrated Index
Iron Check Valves & Y-Strainers Illustrated Index Iron Body Swing Check Valve Bronze Mounted or All Iron 125 lb. SWP 200 lb. CWP Iron Body Swing Check Valve Bronze Mounted 250 lb. SWP 500 lb. CWP Lead
More informationOVERSHOT GATE TECHNICAL DATA SHEET
FRESNO OVERSHOT GATE TECHNICAL DATA SHEET Applications Fresno Overshot Gates effectively control upstream and downstream levels of canals. Improved flow control is achieved through the use of this fully
More informationOperating & Maintenance Manual JEC JCP Series. Centrifugal Pumps
Operating & Maintenance Manual JEC JCP Series Centrifugal Pumps JEC LTD. 408, Cheongyo-ri, Bibong-myun, Hwaseong-si, Gyeonggi-do, South Korea Tel: +82 31 355 0316 Fax: +82 31 355 0319 www.jecpump.com E-mail:
More informationMODEL GEK E3 Guard Enclosure Kit. Operator s Manual for Morse Guard Enclosure Kit Model GEK E3 for Can Tumbler Model E3
Contents Page Receiving Procedures.................... 1 Warranty............................. 1 Safety Information..................... 1-2 Assembly Instructions................... 3-7 Parts List and
More informationMODEL GEK E1 Guard Enclosure Kit. Operator s Manual for Morse Guard Enclosure Kit Model GEK E1 for Can Tumbler Model E1
Contents Page Receiving Procedures.................... 1 Warranty............................. 1 Safety Information..................... 1-2 Assembly Instructions................... 3-7 Parts List and
More informationFisher A11 High-Performance Butterfly Valve, NPS 30-72
A11 Valve Product Bulletin Fisher A11 igh-performance Butterfly Valve, NPS 30-72 The Fisher A11 igh-performance Butterfly Valve maintains tight shutoff, and can be specified for a wide range of pressure
More information1200 Portable Carpet Extractor Extractor Portátil de Alfombras
ENGLISH - ESPAÑOL 100 Portable Carpet Extractor Extractor Portátil de Alfombras Operator and Parts Manual Manual del Operador y Piezas TENNANT COMPANY Commercial Products RANSOM STREET HOLLAND MI 9 U.S.A.
More informationGMV Super Star. Part List
GMV Super Star Part List 25 Table of Contents Part List 25 Magazine... 28 Target Retainer... 30 Throwing Table... 31 Main Frame... 32 Turntable... 33 Base... 34 Elevator... 35 Throwing Arm... 36 Motor...
More informationUser s Manual Installation, Operations, Maintenance and Parts. Modular Dock Bridge 15,000 lbs Gross Vehicle Weight
Modular Dock Bridge 15,000 lbs Gross Vehicle Weight This manual applies to the LHG Dock Bridges manufactured beginning May 2011 with the serial number 61007869 and higher Do not install, operate or service
More information