Survey Results Quality Assurance in the Manufacturing Industry

Transcription

1 Quality Assurance in the Manufacturing Industry

2 Industries 149 persons participated in the survey Industry Others Sonstiges Consumer Konsumgüter Goods Hightech & und Electronics Elektronik Medical Engineering Medizintechnik Aerospace Luft-und Raumfahrt Automotive Automobilbranche Mechanical Maschinenbau Engineering 0% 10% 20% 30% 40% 50%

3 Quality Management in Manufacturing Companies

4 Quality Management in Manufacturing Companies Please evaluate the relevance of Quality Management in your company. not specified 2% less important 11% very important 59% important 28%

5 Quality Management in Manufacturing Companies How well are you informed about this topic? Please estimate the potential for improvement concerning quality assurance in your company. minimal very high 6% very low 1% Basic knowledge exists 31% very good 21% low 8% high 43% medium 42% good 47%

6 Management of Quality Data

7 Management of Quality Data How do you manage quality data in your company? Do you plan to use a quality assurance system in future? 60% 50% 51% not specified 4% 40% yes 24% no 32% 30% 28% 20% 20% 10% 0% Daten Data werden is not nur eingeschränkt, managed nicht zentral centrally verwaltet Daten Data werden is managed zentral auf centrally einem Dateisystem in a file system verwaltet Daten Data werden is managed mittels einer by Softwarelösung a software solution verwaltet 1% keine not specified Angabe I don`t know 40%

8 Management of Quality Data How do you manage quality data in your company? How satisfied are you with this software? 60% very dissatisfied 5% very satisfied 5% 50% 51% dissatisfied 5% 40% 30% 28% 20% 20% 10% 0% Daten Data werden is not nur eingeschränkt, managed nicht zentral centrally verwaltet Daten Data werden is managed zentral auf centrally einem Dateisystem in a file system verwaltet Daten Data werden is managed mittels einer by Softwarelösung a software solution verwaltet 1% keine not specified Angabe satisfied 85%

9 Stamping of Models and Drawings

10 Number Anzahl of der Participants Teilnehmer Stamping of Models and Drawings Please evaluate the relevance of the issue 'stamping of models and drawings' In which department does stamping mainly take place? not specified 1% unimportant 9% very important 31% less important 19% important 40%

11 Anzahl Number der of Participants Teilnehmer Stamping of Models and Drawings How do you stamp your drawings? How satisfied are you with this software? dissatisfied 10% very dissatisfied 2% not specified 2% very satisfied 17% manually Manuell Mit by einer a software Softwarelösung application satisfied 69%

12 Number Anzahl der of Teilnehmer Participants Stamping of Models and Drawings How do you provide characteristic data to the different departments? Zeichnungen und Modelle stehen zur Verfügung. Drawings - Merkmalsdaten and models are werden available. manuell - Characteristic ausgelesen. data is selected manually. Zeichnungen und Modelle stehen zur Drawings Verfügung. and - Merkmalsdaten models are werden available. automatisch - Characteristic ausgelesen. data is selected automatically. Die Bestempelung von Modellen und Zeichnungen Automatic stamping findet automatisiert takes place zentral, centrally. an - Characteristic einer Stelle statt. data Anschließend is provided werden by stamped die Merkmalsdaten mit gestempelten drawings and models. Zeichnungen und Modellen den Abteilungen zur Verfügung gestellt. 2 keine Angabe not specified

13 Anzahl Number der of Teilnehmer Participants Number Anzahl of der Participants Teilnehmer Stamping of Models and Drawings What would you like to improve in your stamping process? Please estimate the potential for improvement concerning stamping in your company Sehr niedrig very low Niedrig low Mittelmäßig medium Hoch high Sehr hoch very high keine Angabe not specified

14 Generation of Inspection Reports

15 Generation of Inspection Reports Please evaluate the relevance of inspection reports in your company. unimportant 6% very important 41% less important 13% important 40%

16 Number Anzahl der of Participants Teilnehmer Generation of Inspection Reports How do you generate inspection reports? How satisfied are you with this software? dissatisfied 4% very dissatisfied 0% not specified 4% very satisfied 17% Manuell manually Basierend auf zuvor gestempelten based on stamped Merkmalen drawings Mit einer Softwarelösung by a software application satisfied 75%

17 Anzahl Number der of Teilnehmer Participants Number Anzahl der of Teilnehmer Participants Generation of Inspection Reports How often do errors occur? What would you like to improve in your inspection reports generation process? So gut wie nie Ab und zu Häufig Beinahe bei jeder keine Angabe practically once in a while often very Erstellung often not never specified

18 Generation of Change Reports

19 Generation of Change Reports Please evaluate the relevance of change management in your company. Which departments generate change reports? not specified 3% unimportant 5% not specified 1% Others 13% very important 41% less important 14% Production planning 21% Design 43% important 37% Quality assurance 22%

20 Anzahl Number der of Teilnehmer Participants Generation of Change Reports How do you track changes? How satisfied are you with this software? very dissatisfied 3% dissatisfied 3% not specified 7% very satisfied 10% manually Manuell Only Nur graphic grafischer Vergleich mittels comparison by a einer software Softwarelösung solution Automatischer Automatic Vergleich mittels comparison by einer Softwarelösung a software 2 keine not specified Angabe satisfied 77%

21 Generation of Change Reports How do you inform the design department about changes? Others 10% manually 35% Change documents 55%

22 Number Anzahl der of Participants Teilnehmer Number Anzahl der of Participants Teilnehmer Generation of Change Reports What would you like to improve in your process of change management? Please estimate the potential for improvement concerning change management in your company Sehr very niedrig low Niedrig low Mittelmäßig medium Hoch high Sehr very niedrig high keine not Angabe specified 26 4

23 Use Cases

24 Summary Which use cases are essential for your company? Kommunikation Communication von of Änderungsanweisungen change instruction in development in den Entwicklungsprozess processes Erstellung Generation von of Änderungsberichten change reports Automatische Automatic Identifikation identification von of Änderungen changes Generation Erstellung of inspection von Prüfberichten reports Automatische Bestempelung von Modellen und Zeichnungen im Hintergrund (z.b. in Automatic stamping of models and drawings in the background einem Freigabe-Workflow) Automatische Automatic Bestempelung stamping von of Modellen models und and Zeichnungen drawings unimportant unwichtig important wichtig sehr very wichtig important

25 Contact Mrs Jasmin Meier Tel: , >> Subscribe to BCT Newsletter