InnovaGrid. Architectural Terracotta Ventilated Facade
|
|
- Ami Mills
- 6 years ago
- Views:
Transcription
1
2 Innova Tile by S.Anselmo, introduces the terracotta ventilated façade system. is a double wall extruded engineered terracotta clay panel system with a central air space to increase insulating value and reduce weight. The upper and lower panel edges are designed and manufactured with continuous kerf to install the panels on the continuous horizontal grid hanging system GridWorxTM. panels are available in a variety of standard sizes with horizontal and vertical orientations. can be specified in 5 color groups with 15 clay colors and 15 standard glazes in smooth finish. Custom sizes, colors and finishes are available at additional cost and lead time.
3 The new terracotta panels are manufactured by InnovaTile by S.Anselmo, I t a l y s l e a d i n g m a n u f a c t u r e r o f t e r r a c o t t a c o n s t r u c t i o n m a t e r i a l s. B y using an extruded top and bottom continuous kerf detail engineered to fit the patented Gridworx façade anchoring system by Precision Wall Systems of Dallas, Texas. provides a safe and reliable mechanical interface and durable light weight installation. By using the proven Gridworx continuous horizontal anchor system, architects and specifiers can achieve high performance ventilated façades that meet the new ASHRAE 90.1 continuous insulation standard. The ability to use the same Gridworx hanging system to install both large and smaller format terracotta façade panels, and to combine terracotta with other materials such as calcium silicate, limestone and granite across an elevation, opens up a wide range of façade possibilities for creative designers. There is a versatile palette of 15 traditional and contemporary clays in addition to 15 standard and unlimited custom glazes. Innova Tile by S.Anselmo has sophisticated in-house extruding facilities to produce numerous precision standard modular formats that minimize waste and offer extensive design flexibility to the designer. Unlike most other terracotta cladding systems, does not require panels to be interlocked or lapped in any way. The Gridworx hanging system provides for a unique non-sequential installation with both sealed and ventilated façade joint options. The Gridworx hanging system is American made, engineered and warrantied. This means that the erection of a high performance -Gridworx façade is a simplistic, and straightforward procedure for the installation contractor and it enables those responsible for long term maintenance of the building to access the structure or systems behind any individual façade panel with ease.
4 TerraGrid Standard Panel Standard Panel TerraGrid Standard Standard Panels Panels are designed are designed to fill the to fill flatthe flat uninterrupted sections sections of the of façade. the façade. Technical data Standard Panel Technical Data Standard Panel Material: Method of Manufacture: Fired terracotta clay Extrusion Piece type Thickness Colors Standard Panel 1-3/16 see page 7 Weight Finish 9.2 lbs/ft 2 smooth Tensile Strength: ASTM C-67 2,756 psi ISO (19 N/mm 2 ) Thermal Expansion: ASTM C % ISO (<6 x 10º Cº -1 ) Freeze-Thaw Resistance: ASTM C-1026 passed ISO (guaranteed) Chemical Resistance: ASTM C-67 passed Thermal Shock Resistance: ASTM C-484 passed Water Absorption: ASTM C % ISO (6 10%) Dimensions Tolerances see chart height: +/- 1/16 square: +/-.5% length: +/- 1/16 straightness: +/-.5% thickness: +/- 1/16 flatness: +/-.5% Dimension Chart Standard Panel Dimension Chart Standard Panel
5 TerraGrid Corner Panel Corner Panel Corner Panels are designed to make the TerraGrid transitions from Corner the Panels flat uninterrupted are designed to sections make the of transitions your façade from at outside the flat corners. uninterrupted Corner sections Panels of your are façade manufactured at outsideat 45 corners. degree angles Corner Panels and installed are manufactured to create at a quirk 45 degree miter angles and installed to create a quirk miter assembly. assembly. Data Standard Panel Technical data Corner Panel Material: Method of Manufacture: Fired terracotta clay Extrusion Piece type Thickness Colors Corner Panel 1-3/16 see page 7 Weight Finish 9.2 lbs/ft 2 smooth Tensile Strength: ASTM C-67 2,756 psi ISO (19 N/mm 2 ) Thermal Expansion: ASTM C % ISO (<6 x 10º Cº -1 ) Freeze-Thaw Resistance: ASTM C-1026 passed ISO (guaranteed) Chemical Resistance: ASTM C-67 passed Thermal Shock Resistance: ASTM C-484 passed Water Absorption: ASTM C % ISO (6 10%) Dimensions Tolerances see chart height: +/- 1/16 square: +/-.5% length: +/- 1/16 straightness: +/-.5% thickness: +/- 1/16 flatness: +/-.5% Dimension Chart Corner Panel Dimension Chart Corner Panel
6 TerraGrid Deflection Panel Deflection Panel TerraGrid Deflection Panels are are designed to honor to honor the the Structural design design of the of building the building envelope envelope by allowing by for floor allowing deflection for while floor maintaining deflection horizontal while maintaining joint dimensions horizontal joint between dimensions panels floor between to floor. panels Deflection floor panels to floor. are also used Deflection at window and panels door are heads, also wall used to soffit at window transitions and and door other heads, architectural wall details to soffit requiring transitions the hanging and other system architectural to be away from the edge of the panel. details requiring the hanging system to be away from the edge of the panel. Technical Data data Deflection Panel Panel Material: Method of Manufacture: Fired terracotta clay Extrusion Piece type Thickness Colors Deflectiom Panel 1-3/16 see page 7 Weight Finish 9.2 lbs/ft 2 smooth Tensile Strength: ASTM C-67 2,756 psi ISO (19 N/mm 2 ) Thermal Expansion: ASTM C % ISO (<6 x 10º Cº -1 ) Freeze-Thaw Resistance: ASTM C-1026 passed ISO (guaranteed) Chemical Resistance: ASTM C-67 passed Thermal Shock Resistance: ASTM C-484 passed Water Absorption: ASTM C % ISO (6 10%) Dimensions Tolerances see chart height: +/- 1/16 square: +/-.5% length: +/- 1/16 straightness: +/-.5% thickness: +/- 1/16 flatness: +/-.5% Dimension Chart Chart Deflection Deflection Panel Panel
7 Deflection Corner TerraGrid Deflection Corner TerraGrid Deflection Corners Corners are designed are designed to honor to the honor the structural design of the of the building building envelope envelope by allowing by allowing for floorfor deflection floor deflection while maintaining while maintaining horizontal horizontal joint dimensions joint dimensions between panels panels floor floor to floor. to floor. Deflection Deflection Corners Corners are used are with used Deflection Panels at outside corners. Deflection Corners are with Deflection Panels at outside corners. Deflection available in left and right and top and bottom orientations. Corners are available in left and right and top and bottom orientations. Technical Data Data Deflection Deflection Corner Corner Material: Method of Manufacture: Fired terracotta clay Extrusion Piece type Thickness Colors Deflectiom Corner 1-3/16 see page 7 Weight Finish 9.2 lbs/ft 2 smooth Tensile Strength: ASTM C-67 2,756 psi ISO (19 N/mm 2 ) Thermal Expansion: ASTM C % ISO (<6 x 10º Cº -1 ) Freeze-Thaw Resistance: ASTM C-1026 passed ISO (guaranteed) Chemical Resistance: ASTM C-67 passed Thermal Shock Resistance: ASTM C-484 passed Water Absorption: ASTM C % ISO (6 10%) Dimensions Tolerances see chart height: +/- 1/16 square: +/-.5% length: +/- 1/16 straightness: +/-.5% thickness: +/- 1/16 flatness: +/-.5% Dimension Chart Chart Deflection Deflection Corner Corner
8 Innova Tubes TerraGrid Terra Tubes TerraGrid Terra Innova Tubes Tubes are are designed designed as solar as or solar sunor sun screens. screens. They They are are assembled assembled using using aluminum aluminum tubes tubes inserted inserted in in the the cavity of the Terra Tube Tube extrusion. extrusion. The The two two profiles profiles provide provide the ability the to ability produce to varied produce patterns varied of patterns light and shade of light in and frontshade in of front windows. of windows. Terra Tubes Innova can Tubes combined can be with combined other TerraGrid with other TerraGrid panels creating panels interesting creating surfaces interesting on the surfaces building s on façade. the building s façade. Technical Data Data Terra Innova Tube Tube Material: Method of Manufacture: Fired terracotta clay Extrusion Piece type Thickness Colors Terra Tube 2-3/8 see page 7 Weight Finish 3.3 lbs/ft smooth 5.8 lbs/ft Tensile Strength: ASTM C-67 2,756 psi ISO (19 N/mm 2 ) Thermal Expansion: ASTM C % ISO (<6 x 10º Cº -1 ) Freeze-Thaw Resistance: ASTM C-1026 passed ISO (guaranteed) Chemical Resistance: ASTM C-67 passed Thermal Shock Resistance: ASTM C-484 passed Water Absorption: ASTM C % ISO (6 10%) Dimensions Tolerances see chart height: +/- 1/16 square: +/-.5% length: +/- 1/16 straightness: +/-.5% thickness: +/- 1/16 flatness: +/-.5% Dimension Chart Terra Innova Tube Tubes
9 Dimension Chart Standard sizes standard size chart pdf or jpeg. FILL PAGE
10 Color Chart Red Clay Brown Clay Brushed Natural
11 Color Chart Ochre Clay Brushed Natural Colored Clay
12 Color Chart Color Glaze
13 Innova Tile Inc Washington Avenue Houston, Texas (800)
SECTION TERRA COTTA CLAY TILE RAINSCREEN SYSTEM
SECTION 07400 TERRA COTTA CLAY TILE RAINSCREEN SYSTEM PART 1 GENERAL 1.01 WORK INCLUDED A. The terra cotta clay tile elements and aluminum support system shall be manufactured by NBK Keramik GmbH as represented
More informationHunterDouglas NBK Ceramic TERRART [Large/Mid/Shingle/Light/Baguette) Terracotta Façade System
HunterDouglas NBK Ceramic TERRART [Large/Mid/Shingle/Light/Baguette) Terracotta Façade System Sound-Rite Inc. #9, 2821 3rd Avenue NE Calgary, AB T2A 7P3 Tel 403-296-0505 Fax 403-296-0511 Email info@sound-rite.com
More informationTERRART LIGHT. Terracotta Façades
TERRART LIGHT Terracotta Façades 800.727.8953 www.hunterdouglascontract.com/facades 1 TERRART LIGHT Terracotta Façades The NBK TERRART Light system makes the beauty of terracotta facade tiles available
More informationTerraClad TM General Specifications
TerraClad TM General Specifications PRODUCT NAMES: Terra cotta Baguettes/Louvers and Related Work MANUFACTURER: Boston Valley Terra Cotta 6860 S. Abbott Road Orchard Park, NY 14127 Phone: 888-214-3655
More informationARCHITECTURAL TERRACOTTA
NBK A R C H I T E C T U R A L T E R R A C O T T A NBK A R C H I T E C T U R A L T E R R A C O T T A NBK Keramik GmbH & Co. KG Reeser Straße 235 D - 46446 Emmerich Germany FON: + 49 (0) 28 22 / 81 11-0
More informationArcwall. Rain Screen Wall System
Arcwall Rain Screen Wall System Arcwall is an economical drained and back-ventilated rain screen system for both walls and soffits manufactured from formed aluminum or stainless plate. The system combines
More informationArcwall. Rain Screen Wall System
Rain Screen Wall System is an economical drained and back-ventilated rain screen system for both walls and soffits manufactured from formed aluminum or stainless plate. The system combines excellent performance
More informationAmeriplate. Rain Screen Wall System
Ameriplate Rain Screen Wall System Efficiency and fascinating free-floating effects are hallmarks of Metalwërks Ameriplate wall systems. With Ameriplate, the cut edges of the face plate material are the
More informationB. Engineering design and performance requirements for terracotta baguette & fin assemblies.
SECTION 07 4229 TERRACOTTA BAGUETTE & FIN ELEMENTS PART 1 GENERAL 1.1 SECTION INCLUDES A. Drawings and general provisions of the Contract, including General and Supplementary Conditions and Division 01
More informationAmeriplate. Rain Screen Wall System
Ameriplate Rain Screen Wall System Efficiency and fascinating free-floating effects are hallmarks of Metalwërks Ameriplate wall systems. With Ameriplate, the cut edges of the face plate material are the
More informationLUXALON. Other Luxalon products. QuadroCladn. Sandwich Wall. Multiple Panel Façade. Sun Louvres. Ceilings and Soffits
QuadroClad n Other Luxalon products QuadroCladn Sandwich Wall Multiple Panel Façade Sun Louvres Ceilings and Soffits Luxaclair Sealed Blinds Hunter Douglas Construction Elements BV Bellsize Close Walsall
More informationCorium Brick Rainscreen System Specifications
CORIUM BRICK RAINSCREEN SYSTEM PART 1 - GENERAL 1.1 SUMMARY A. Work Included: The Work of this Section shall include but not be limited to the following: 1. Corium brick plates 2. Galvanized and coated
More informationeliosolar Models Size with fascia Louvers Louver size Louver Spacing Louver Angle ETME A 2ʼ6 x 8ʼ x 5 5 1x ETME B 4ʼ x 8ʼ x x3 4 45
Eliosolar Thermal Shade Modular Elements are available in four sizes with standard fascias, anchors and posts for easy ordering and assembly. Combine and assemble to create various Hybrid Shade Structures:
More informationbrick.com acmetccladding.com
1.800.932.2263 brick.com acmetccladding.com History Table of Contents Fired clay is in our DNA. And from the day we were founded, architects have challenged us to extend and adapt this timeless material
More informationExterior Wall Solutions Building Shell
A strong, water tight and thermally insulated building shell will ensure the buildings sustainability of usage over time. The Exterior Shell is the most important factor of protection to ensure that the
More informationSECTION EZ-SLIDE 80 AND 180 HEAVY GLASS TOP HUNG SLIDING DOOR SYSTEMS
Page 1 of 6 SECTION 08 32 20 EZ-SLIDE 80 AND 180 HEAVY GLASS TOP HUNG SLIDING DOOR SYSTEMS USE THIS SECTION WHEN SPECIFYING OVERHEAD SUPPORTED GLASS PANEL PARTITIONS. SECTION INCLUDES OVERHEAD TRACK ASSEMBLY,
More informationC. Engineering design and performance requirements for terracotta rainscreen assemblies.
SECTION 07 4229 TERRACOTTA CLAY TILE RAINSCREEN ASSEMBLY SPECIFICTION FOR TERRART LARGE PART 1 GENERAL 1.1 SECTION INCLUDES A. Drawings and general provisions of the Contract, including General and Supplementary
More informationProduct Guide Specification
April 2014 6840 SW 81 Terrace Miami, Florida 33143 Phone 305-666-6676 Fax 305-666-7675 Website www.trimstonepanels.com E-mail stoneworks@stoneworksofart.com Product Guide Specification Specifier Notes:
More informationB. Engineering design and performance requirements for terracotta rainscreen assemblies.
SECTION 07 4229 TERRACOTTA CLAY TILE RAINSCREEN ASSEMBLY SPECIFICTION FOR TERRART LIGHT PART 1 GENERAL 1.1 SECTION INCLUDES A. Drawings and general provisions of the Contract, including General and Supplementary
More informationB. Engineering design and performance requirements for terracotta rainscreen assemblies.
SECTION 07 4229 TERRACOTTA CLAY TILE RAINSCREEN ASSEMBLY SPECIFICTION FOR TERRART LARGE PART 1 GENERAL 1.1 SECTION INCLUDES A. Drawings and general provisions of the Contract, including General and Supplementary
More informationSECTION CRL70 HEAVY GLASS TOP HUNG SLIDING DOOR SYSTEMS
Page 1 of 6 SECTION 08 32 20 CRL70 HEAVY GLASS TOP HUNG SLIDING DOOR SYSTEMS USE THIS SECTION WHEN SPECIFYING OVERHEAD SUPPORTED GLASS [OR WOOD] PANEL PARTITIONS. SECTION INCLUDES OVERHEAD TRACK ASSEMBLY,
More information[Project Name] Section [ ]
Page 1 PART 1 - GENERAL 1.1 SECTION INCLUDES 1.1.1 Design, labor, products, equipment and services necessary for interior/exterior Aluminum Facade System (AFS) work, in accordance with the Contract Documents.
More informationCOMPLE TE RAINSCREEN WALL SYSTEMS
4648 S. Old Peachtree Rd Norcross, GA 30071 800.646.3826 (p) 770.908.2264 (f ) Copyright 2013 R041713 4648 S. Old Peachtree Rd Norcross, GA 30071 800.646.3826 (p) 770.908.2264 (f ) Copyright 2013 R041713
More informationHome. Overview. Benefits. Installation. Contact. (ventilated walls)
T I L E S O L U T I O N S (ventilated walls) Marazzi Ventilated Wall System Porcelain stoneware cladding solution for energy efficient buildings Large format ENERGY EFFICIENT SOUND INSULATION An external,
More informationProduct Guide Specification
February 2015 528 Pioneer Parkway Clare, Michigan 48617 Toll Free 800-631-0212 Website www.tranquilsystems.com E-mail sales@tranquilsystems.com Product Guide Specification Tranquil Adapt Walls glass partitions
More informationExterior System installation instructions
Exterior System installation instructions 11/20/14 WPS ES-400 & 500 INSTALLATION INSTRUCTION. The WPS ES-400 & 500 systems Façade panels are designed for use as an external wall cladding in conjunction
More informationSECTION COMPOSITE WALL PANELS PART 1 GENERAL 1.01 SECTION INCLUDES
SECTION 07 4243 - PART 1 GENERAL 1.01 SECTION INCLUDES A. Composite wall panel system consisting of aluminum-faced composite panels in a rainscreen application as part of the assembly described below.
More informationPATENTED. StoneFit Wall System WITH DRYFIT TECHNOLOGY
PATENTED StoneFit Wall System WITH DRYFIT TECHNOLOGY StoneFit Wall System with DryFit Technology An innovative stone cladding solution that uses patented interlocking panels. Product Features REDUCED LABOR
More informationSculpted 3D Minimal. Rain Screen Wall System
Sculpted 3D Minimal Rain Screen Wall System Metalwërks Sculpted frees designers to create iconic facades more easily and affordably than ever before by elevating three-dimensional wall panels to entirely
More informationSECTION PORCELAIN TILE WALL SYSTEM. (Porcelanosa Venis Urbatek)
SECTION 074251 (Porcelanosa Venis Urbatek) PART 1 - GENERAL 1.1 GENERAL PROVISIONS A. Attention is directed to the CONTRACT AND GENERAL CONDITIONS and all Sections within DIVISION 01 - GENERAL REQUIREMENTS
More informationEQUITONE is a material supplier. Installation Contractors shall be trained and approved by EQUITONE.
This specification has been numbered, organized and formatted in accordance with the MasterFormat, Section Format and Page Format documents published jointly by Construction Specifications Institute (CSI)
More informationSECTION CRL50 AND CRL51 HEAVY GLASS TOP HUNG SLIDING DOOR SYSTEMS
SECTION 08 32 20 CRL50 AND CRL51 HEAVY GLASS TOP HUNG SLIDING DOOR SYSTEMS Page 1 of 6 USE THIS SECTION WHEN SPECIFYING OVERHEAD SUPPORTED GLASS PANEL PARTITIONS. SECTION INCLUDES OVERHEAD TRACK ASSEMBLY,
More informationST. JOHNS COUNTY ARCH. PROJ. NO SECTION PREFABRICATED ALUMINUM CANOPIES PART 1 - GENERAL 1.1 RELATED DOCUMENTS
SECTION 10530 PREFABRICATED ALUMINUM CANOPIES PART 1 - GENERAL 1.1 RELATED DOCUMENTS A. Drawings and general provisions of the Contract, including General and Supplementary Conditions and Division 1 Specification
More informationbrick.com acmetccladding.com
1.800.932.2263 brick.com acmetccladding.com History Table of Contents Virtually from the day of its founding, in 1891, Acme has been meeting the needs of architects with innovative products, compelling
More informationDesign of Adhered Masonry Veneers for Multi-storey Buildings
Design of Adhered Masonry Veneers for Multi-storey Buildings Presented by Dr. Mark D. Hagel, PhD., P.Eng Executive Director at the Alberta Masonry Council Mark Hagel PhD. in civil engineering, BSc. in
More informationRainspan ArGeTon. Part of Eurobond Laminates range of architectural facade systems
Rainspan ArGeTon Part of Eurobond Laminates range of architectural facade systems Rainspan ArGeTon Rainspan ArGeTon is a partnership between Eurobond Laminates and Telling Architectural for their architectural
More informationREFLECTIVE FACE CONCRETE MASONRY UNITS
SECTION 04221 REFLECTIVE FACE CONCRETE MASONRY UNITS ***** E. Dillon & Company manufactures the following high quality, custom produced, architectural concrete masonry units (CMU) using superior colored
More informationEQUITONE is a material supplier. Installation Contractors shall be trained and approved by EQUITONE.
This specification has been numbered, organized and formatted in accordance with the MasterFormat, Section Format and Page Format documents published jointly by Construction Specifications Institute (CSI)
More informationGuide Specifications - Section SL35. NanaWall SL35, Aluminum Framed Folding System PART 1 - GENERAL
NanaWall SL35, Aluminum Framed Folding System PART 1 - GENERAL 1.01 SUMMARY A. Section Includes: Engineered sliding/folding aluminum and glass door system, including aluminum frame, threshold, panels,
More informationARCHITECTURAL WALL PANELS APPLIED OVER A SHEATHED STUDWALL BY MEANS OF A FIELD ASSEMBLED TEN66 SUB-FRAME SYSTEM
SYSTEM TEN66 INSTALLATION DATA & DETAILS Omnis Panels, Inc. Architectural Building Panels 22 East Chicago Avenue Suite 210 Naperville, Illinois 60540 (800) 450-6099 (630) 355-4040 Fax: (630) 355-4995 www.omnis-panels.com
More informationProduct Guide Specification
April 2014 6840 SW 81 Terrace Miami, Florida 33143 Phone 305-666-6676 Fax 305-666-7675 Website www.trimstonepanels.com E-mail stoneworks@stoneworksofart.com Product Guide Specification Specifier Notes:
More informationOPERABLE PARTITIONS. Signature
OPERABLE PARTITIONS Signature 8000 SIGNATURE 2 WHO WE ARE Moderco is an international manufacturer of Manual & Electric Operable Partitions, Accordion Doors, Glass Wall Systems, and Gymnasium Dividers.
More informationNatureScape. 3 Thermally Broken 2 Non-thermal
NatureScape 3 Thermally Broken 2 Non-thermal REASONS TO CONSIDER PREFABRICATED: Pre-designed, pre-engineered and pre-inspected, the NatureScape enclosure guarantees that the room will be delivered and
More informationTerraClad TM General Specifications
TerraClad TM General Specifications PRODUCT NAMES: Terra cotta Panels and Related Work MANUFACTURER: Boston Valley Terra Cotta 6860 S. Abbott Road Orchard Park, NY 14127 Phone: 888-214-3655 Phone: 716-649-7490
More informationFlushglaze For Steel Tube Applications and Horizontal Panels. Façades Installation Guide
Flushglaze 7500 For Steel Tube pplications and Horizontal Panels Façades Installation Guide September 2016 BENCHMRK Welcome to Kingspan, global leaders in the design and manufacture of insulated metal
More informationDIVISION 04 MASONRY CAST STONE. A. Design Considerations. 1. Cast stone shall comply with ASTM C1364, Standard Specification for Cast Stone.
DIVISION 04 MASONRY 04720 CAST STONE A. Design Considerations 1. Cast stone shall comply with ASTM C1364, Standard Specification for Cast Stone. 2. Care must be taken in the design of individual units
More informationIntroducing our new high-performance thermal curtain wall, windows, entrances and storefronts. thermal
Introducing our new high-performance thermal curtain wall, windows, entrances and storefronts thermal Perot Museum of Nature and Science Location: Dallas, TX Building Envelope Our solar and thermal performance
More informationDetails Information, Matrix and Contents
Details Information, Matrix and Contents CROSSVILLE - SHACKERLEY SURECLAD PORCELAIN STONE VENTILATED FACADE 2014 Version 6 10/01/14 1 Sureclad Porcelain Stone Ventilated Facade System Details Any advice,
More informationA clear vision of what you imagined
A clear vision of what you imagined PUR DESIGN 100AD-200AD-300AD Commercial panoramic door JPR s PUR DESIGN Series doors are manufactured to meet the highest standards of performance and aesthetics. Designed
More informationPhenolic Exterior Wall Cladding
Phenolic Exterior Wall Cladding SECTION 07 42 43 COMPOSITE WALL PANELS This specification includes hidden text for editing for a project. PART 1 - GENERAL 1.1 SUMMARY A. Section Includes: 1. Phenolic wall
More informationGLASSWALL SPECIFICATIONS
GLASSWALL SPECIFICATIONS Series GL1 Individual, Glass Panels PRODUCT OVERVIEW: Top Supported Side Stack Individual, Omni-Directional Panels Manually Operated Maximum Opening Height: 10' 5 [.m] Maximum
More informationCurtain Wall Stick System (Capped)
Curtain Wall Stick System (Capped) Stick Construction Capped Curtain Wall Reference Brand: Sapa Building System Elegance 52 ST GENERAL DESCRIPTION Grid based thermally insulated curtain wall system with
More informationHIGH PRESSURE LAMINATE CLADDING PANELS SPECIFICATION V1.0
HIGH PRESSURE LAMINATE CLADDING PANELS SPECIFICATION V1.0 PART 1 - GENERAL 1.1 SECTION INCLUDES A. Exterior High Pressure Laminate cladding panel system and accessories as required, for a complete drained
More informationUltra-Thin Prestressed Precast Panel Technology
Ultra-Thin Prestressed Precast Panel Technology AIA/CES PROGRAM PURPOSE AltusGroup Inc. is a Registered Provider with The American Institute of Architects Continuing Education Systems. Credit earned on
More informationSECTION FLEXIBLE FLASHING SYSTEM FOR MASONRY VENEER
PART 1 - GENERAL 1.01 SUMMARY SECTION 07 65 00 FLEXIBLE FLASHING SYSTEM FOR MASONRY VENEER A. Section includes through wall masonry flashing system components for installation over sheathing where spray
More informationENVELOPE The Ultimate In Performance In A Wet-Sealed System ROUT & RETURN (RR) SYSTEM TECHNICAL MANUAL
ENVELOPE 2000 ROUT & RETURN (RR) SYSTEM The Ultimate In Performance In A Wet-Sealed System TECHNICAL MANUAL System Assembly Substrate Layouts CAD Sections/Details Physical Properties Performance Properties
More informationTR-700 Window Wall. Multifaceted Window System for Flexible Design
TR-700 Window Wall Multifaceted Window System for Flexible Design The Admiral at the Lake, Chicago, Illinois, USA Architect: Perkins + Will, Dallas, Texas, USA Window Installer: Softer Lite Window Company,
More informationInstallation Guide. Rain Screen Panel System
Installation Guide Rain Screen Panel System Main Office 6860 South Abbott Road Orchard Park, New York 14127 tel 716.649.7490 toll free 1.888.214.3655 www.bostonvalley.com General Inquiries info@bostonvalley.com
More informationSignature Series 5 Lap SECTION ALUMINUM WINDOWS
Signature Series 5 Lap SECTION 08 51 13 ALUMINUM WINDOWS PART 1 GENERAL 1.01 SUMMARY A. Related Documents: Conditions of the Contract, Division 1 - General Requirements, and Drawings apply to Work of this
More informationSPECIFICATIONS FOR AluSystems Aluminum Composite Panels Series 20 Dry Joint 1.00 GENERAL 1.01 RANGE OF WORK Section includes: Laminated panels and attachment systems for use as exterior cladding. A. Provide
More information2004 MASTER FORMAT SECTION Façade Panels
2004 MASTER FORMAT SECTION 07 44 00 Façade Panels Hunter Douglas Façades Aluminum Façade Systems PART 1 GENERAL 1.1 RELATED DOCUMENTS A. Drawings and general provisions of the Contract, including General
More informationSECTION BRICK FACED ARCHITECTURAL PRECAST CONCRETE. A. Section Cast-In-Place Concrete: Concrete, reinforcing, anchors, etc.
SECTION 03460 BRICK FACED ARCHITECTURAL PRECAST CONCRETE PART 1 GENERAL 1.1 SECTION INCLUDES A. Site Cast (Tilt-Up) Brick Faced Concrete Panels. B. Plant Cast (Precast) Brick Faced Concrete Panels. 1.2
More informationSeries B450 Guide Specification
Boyd Aluminum Manufacturing Company P.O. Box 1565 3248 E. Division Street Springfield, MO 65801-1565 800-737-2800 417-862-1232 fax boydaluminum.com STOREFRONT SERIES B450 Shear Block Air Infiltration:
More informationSECTION TRESPA ATHLON SOLID COMPOSITE CASEWORK
SECTION 064115 TRESPA ATHLON SOLID COMPOSITE CASEWORK PART 1 GENERAL 1.01 SECTION INCLUDES A. Solid composite casework. 1.02 RELATED SECTIONS A. Documents affecting work in this section includes but is
More informationOmniplate Barrier Wall System
is an economical barrier wall system with visible caulk joints at all horizontal and vertical panel joints. As a barrier wall, serves as the primary weather barrier for the building envelope. It can be
More informationGUIDE SPECIFICATION EXETER VERSA SHIELD SECURITY SCREEN SYSTEM
1 GUIDE SPECIFICATION EXETER VERSA SHIELD SECURITY SCREEN SYSTEM 1.01 WORK INCLUDED PART 1: GENERAL A. Provide for all labor, equipment, materials, and services to furnish and install VERSA SHIELD Window
More informationReal Stone Cladding. stone cladding system
Stone Cladding System Catalogue 2015 1 STONE CLADDING SYSTEM Rustic yet elegant natural stone facade suitable for exterior and interior use, at a fraction of cost of traditional walling Easy to install,
More informationSTARRCO M O D U L A R O F F I C E S Y S T E M S S P A C E S O L U T I O N S F O R T O D A Y A N D T O M O R R O W
STARRCO M O D U L A R O F F I C E S Y S T E M S SPACE SOLUTIONS FOR TODAY W.W. Cannon, Inc. 2653 Brenner Dr. Dallas, TX 75220 Phone: 214-357-2846 Toll Free: 800-442-3061 Fax: 214-357-4576 www.wwcannon.com
More informationPART 1 / GENERAL SECTION ALUMINUM PLATE PANEL SYSTEM. ALPLY Insulated Panels. Alply TECH WALL Aluminum Plate System 2002
SECTION 07 42 13 ALUMINUM PLATE PANEL SYSTEM ALPLY Insulated Panels Alply TECH WALL Aluminum Plate System 2002 PART 1 / GENERAL 1.1 SYSTEM DESCRIPTION A. Preformed Aluminum Plate System for Screen wall
More informationThe S.10 ALL ALUMINUM LIFT & SLIDE DOOR SYSTEM. Expanding spaces to the extraordinary
The S.10 ALL ALUMINUM LIFT & SLIDE DOOR SYSTEM Expanding spaces to the extraordinary Overview Elevation View of a 4-panel Lift & Slide Door System - Stacked Configuration Panda s Lift & Slide Door Systems
More informationARCHITECTURAL TERRACOTTA
GB NBK Ceramic ARCHITECTURAL TERRACOTTA NBK Ceramic GmbH & Co.KG Reeser Straße 235 D-46446 Emmerich Germany Phone +49 (0) 28 22 / 81 11-0 Fax +49 (0) 2822 / 81 11-20 E-mail: info@nbk.de NBK (UK) Office
More informationThe S.15 ALL WOOD WITH ALUMINUM CORE LIFT & SLIDE DOOR SYSTEM. Expanding spaces to the extraordinary
The S.15 ALL WOOD WITH ALUMINUM CORE LIFT & SLIDE DOOR SYSTEM Expanding spaces to the extraordinary Overview Elevation View of a 4-panel Lift & Slide Door System - Stacked Configuration Panda s Lift &
More informationSERIES SA30 STEEL/ALUMINUM FIXED DETENTION WINDOWS SECTION 08651
SERIES SA30 STEEL/ALUMINUM FIXED DETENTION WINDOWS SECTION 08651 PART 1 GENERAL 1.1 DESCRIPTION A. Work Included: 1. Furnish all labor and materials to complete the fabrication of detention windows as
More informationEasylationWall. External Wall Insulation System. bringing european innovation
EasylationWall External Wall Insulation System bringing european innovation EasylationWall... the new External Wall Insulation System using brick slips for stunning façades. EXTERNAL WALL INSULATION (EWI)
More informationSERIES /8 HORIZONTAL SLIDING WINDOW (CW30)
SERIES 525 2-5/8 HORIZONTAL SLIDING WINDOW (CW30) I. GENERAL: SPECIFICATIONS Scope of Work - Furnish all necessary materials, labor and equipment for the complete installation of aluminum windows for this
More informationVinyl Windows and Doors
Install Atrium 0UZ[PSS *VUÄKLUJL Vinyl Windows and Doors Atrium Vinyl Windows A Commitment to Excellence Since 1948 Welcome the beauty of The Vinyl Advantage Vinyl is the ideal material for engineering
More informationTechnical Information. Façade Solutions
Façade Solutions Façade Solutions Argeton was developed as a ceramic panel element for rear-ventilated curtain façades at the beginning of the 1980s. The objective was to create a timeless, modern façade
More informationSeries 900 Horizontal Sliding Window
Protecting you from the elements AJ Manufacturing s insulated aluminum windows keep your building protected from all extremes of weather. During the scorching heat of summer or the frigid temps of winter,
More informationVENTILATED TERRACOTTA ACCESSORIES
VENTILATED TERRACOTTA ACCESSORIES GENERAL INFORMATION Soladrilho has a wide range of accessories for it s ventilated façades FACE and COVER. Due to the evolution in architecture and an increase of original
More informationMASTERSPEC TECHNICAL SPECIFICATIONS DIVISION 08 - OPENINGS. A. This Section includes fixed and operable aluminum-framed windows.
SECTION 085113 - ALUMINUM WINDOWS PART 1 - GENERAL 1.1 SUMMARY A. This Section includes fixed and operable aluminum-framed windows. 1.2 PERFORMANCE REQUIREMENTS A. General: Provide aluminum windows capable
More informationBlast Resistant Enhanced Curtain Wall. Reference Brand: Sapa Building System Elegance 85PF GENERAL DESCRIPTION PERFORMANCE
Blast Resistant Enhanced Curtain Wall Blast Resistant Enhanced Curtain Wall Reference Brand: Sapa Building System Elegance 85PF GENERAL DESCRIPTION Grid based thermally insulated curtain wall system with
More informationThermal Systems KWC Ltd. Telephone: (403) Avenue N.E. Facsimile: (403)
PAGE 1 OF 7 1. GENERAL 1.1 SECTION INCLUDES.1 All requirements of the contract documents form an integral part of the work specified herein; in particular refer to the general conditions and Division 1
More informationDIVISION: THERMAL AND MOISTURE PROTECTION SECTION: COMPOSITE WALL PANELS REPORT HOLDER: TRESPA NORTH AMERICA, LTD.
0 ICC ES Report ICC ES (800) 423 6587 (562) 699 0543 www.icc es.org 000 Most Widely Accepted and Trusted ESR 1687 Reissued 02/2016 This report is subject to renewal 02/2017. DIVISION: 07 00 00 THERMAL
More informationExpansion Joint Covers
Expansion Joint Covers 07 95 00 (079513) PART 1 GENERAL 1.01 RELATED DOCUMENTS A. Drawings and general provisions of the Contract, including General Conditions, Supplementary Conditions and Division-1
More informationGUIDE SPECIFICATION EXETER SECURITY SHIELD SECURITY WINDOW BARRIER SYSTEM
1 GUIDE SPECIFICATION EXETER SECURITY SHIELD SECURITY WINDOW BARRIER SYSTEM 1.01 WORK INCLUDED PART 1: GENERAL A. Provide for all labor, equipment, materials and services to furnish and install SECURITY
More informationGuideline Specifications
Page 1 of 7 PART 1 Guideline Specifications Exterior Aluminum/Composite Wall Panels GENERAL ARROWHEAD 508 SYSTEM Pressure Equalized Rainscreen SECTION 07410 1.01 SUMMARY A. Work of this section included
More informationPANEL INSTALLATION GUIDE
PANEL INSTALLATION GUIDE AVENERE CLADDING LLC IMPORTANT NOTE: All concrete and clay products - when machined or mechanically cut - will release dust which may contain quartz particles. Inhalation of high
More informationkingspan evolution. insulated flat architectural wall & facade systems proud supporting corporate partner
kingspan evolution. insulated flat architectural wall & facade systems proud supporting corporate partner publication date: april 2011 introduction Addressing the building envelope The building envelope
More informationMARLIN WINDOWS, INC 3500 HC SERIES 3 3 8" SLIDING WINDOW PAGE 1
PAGE 1 SPECIFICATIONS GENERAL Sliding windows shall be Marlin series #3500-HC (thermally improved) as manufactured by Marlin windows, and shall conform to ANSI/AAMA 101-88 HS-HC40. Series #3500 shall have
More informationDesign Manual Facade, riveted Panel fixed to T-Sections
Design Manual Facade, riveted Part Product changes in the sense of a technical progress are reserved. All advice recommendation and information is given to the best of our knowledge but without any obligation
More informationCENTRIA Intercept Entyre Preformed Metal Modular Panel Wall System
CENTRIA Intercept Entyre Preformed Metal Modular Panel Wall System CENTRIA Intercept Entyre is a unique modular metal wall system designed, available from a reliable national manufacturer and supported
More informationLEEDS : LEEDS UNIVERSITY
STAGE @ LEEDS : LEEDS UNIVERSITY Client : Leeds University Project Manager : Leeds University Structural Engineer : Bland and Swift Services Consultant : Preston Lee Chambers Contractor : Brenville Construction
More informationCreative Façade Solutions Small and Medium Formats
Creative Façade Solutions Small and Medium Formats 1 I CREATIVE FAÇADE SOLUTIONS 2 I CREATIVE FAÇADE SOLUTIONS Many design possibilities Like a skin, small and medium modules in thicknesses of 4 and 6
More informationSECTION STAY-IN-PLACE INSULATED CONCRETE FORMING SYSTEM
ARCHITECTURAL SPECIFICATIONS MANUFACTURER: InterBlock LLC PO Box 1123, Sheboygan, WI 53082 Phone Number 920-207-7234 SECTION 03100 STAY-IN-PLACE INSULATED CONCRETE FORMING SYSTEM PART 1 GENERAL 1.01 Summary
More informationExpansion Joint Covers (079513)
Expansion Joint Covers 07 95 00 (079513) PART 1 GENERAL 1.01 RELATED DOCUMENTS A. Drawings and general provisions of the Contract, including General Conditions, Supplementary Conditions and Division-1
More informationSECTION CRC575 UNITARY CLEANROOM WALL SYSTEM STUDLESS CLEANROOMWALL SYSTEM ME175 3-IN-1 CLEANROOM WALL SYSTEM
SECTION 13200 CRC575 UNITARY CLEANROOM WALL SYSTEM 175-300 STUDLESS CLEANROOMWALL SYSTEM ME175 3-IN-1 CLEANROOM WALL SYSTEM PART 1 GENERAL 1.01 WORK INCLUDED A. This Section provides the requirements necessary
More informationSPECIFICATIONS FOR. CEI Composite Materials, LLC Featuring R4000 Rear Back Ventilated Rainscreen System. Section Aluminum Composite Panels
SPECIFICATIONS FOR (1/13 Edition) CEI Composite Materials, LLC Featuring R4000 Rear Back Ventilated Rainscreen System Section 074243 Aluminum Composite Panels (Based upon CEI Composite Materials R4000
More informationPRODUCT PORTFOLIO. system page 18 OPENING DOORS AND WINDOWS page 20 FLAT DOORS PAGE22 SLIDING DOORS AND WINDOWS page 24 rolling shutters
PRODUCT PORTFOLIO Miura hotel Cheladna, Czech Republic Ventilated façade system Vario PRODUCT PORTFOLIO page 08 CURTAIN WALL Façade SYSTEMS page 10 TAILOR-MADE UNITIZED FAÇADE SYSTEM page 12 VENTILATED
More information