Fabric detail available in any of these standard options. Timber finishes available in any of these standard species

Transcription

1 AP1 Acoustic Wall Panel These are highly effective acoustic treatment solutions for rooms where 'full' cover treatments are not desirable or affordable. They offer a high performance solution to the control of room reverberation and monitoring reflections using tried and tested panel designs that we use in our studio projects. Standard stock size is 1200mm by 600mm (pictured) but they can be manufactured to any size to fit individual room requirements. Please ask for quotation. Available in three standard models. AP1H High Band, AP1W Wide band and the AP1L Low Band. The AP1L model includes an additional internal membrane, providing additional absorption at a specific low-frequency (to be specified upon ordering - usually taken to be the resonant frequency of the room). Frame can be made from painted MDF, in a colour to be specified, or can be made with a wood veneer finish in one of the available species. Front surface is finished with a fabric layer from the Cara range. Wall fixing kit supplied for flat walls. Uneven wall option or ceiling option available on request. Weight (AP1H)= 9kg Weight (AP1W) = 12kg Weight (AP1L) = 15kg Height = 1200mm Width = 600mm Depth (AP1H) = 63mm Depth (AP1W) = 88mm Depth (AP1L) = 113mm Fabric detail available in any of these standard options

2 AS Acoustic Standing Panel AS is the next step up again from the ASP, this standing panel is essentially just a movable section of acoustic wall. Several of these can be used together to provide massive control over the acoustics of a room. Standard design has hardwood veneered surface on one side and a soft fabric finish on the other, allowing for maximum acoustic flexibility soft sides can be used to create a dead-zone within a large live space, or vice versa. AS feet are sturdy but unattached panel can be lifted straight out for ease of storage. AS1 is full height, AS2 is full height with vision (pictured) and AS3 is half height. AS can also be manufactured to individual specifications. Exterior frame and feet are available either painted or with a Hardwood Veneered finish in one of the available species. Soft side is finished with a fabric layer from the Cara range AS Absorption Coefficients AS1 & AS2 Height = 2000mm AS3 Height = 1000mm Width = 1000mm Panel Depth = 62mm Foot Depth = 600mm - Foot Height 96mm AS2 Glass Vision Panel = 926mm x 794mm (hxw) AS1 Weight = 40kg AS2 Weight = 45kg AS3 Weight = 20kg Fabric detail available in any of these standard options

3 ASP1 Acoustic Swing Panel The next step up from the AP1 Panel, our ASP1 Swing Panel Set is two full acoustic panels hinged together along one long edge, allowing the set to open like a book. Allows on-the-fly choice between soft and hard wall surfaces. Several swing panels in a room can provide a huge range of available sounds. When fitted, one leaf of the book will be fixed to the wall, leaving the second leaf free to swing into the room. The front cover of the book is a hard panel, facing into the room when closed. Standard stock size is 1200mm x600mm (each leaf) but just like AP1, these can be constructed to any requirement. Hard surface on back of free swinging leaf (i.e. facing into room when book is closed) is available as painted or veneered finish. As per the standard acoustic panel, the Swing Panel set is available in high, wide and low band variants, (note that the thickness of the panel set will be twice that of the AP1 values when the set is closed). The ASP1L model includes an internal membrane, providing additional absorption at a specific low-frequency (to be specified upon ordering - usually taken to be the resonant frequency of the room). As with the AP1, frame can either be painted MDF in a colour to be specified, or can be made with a wood veneer finish in one of the available species. Inside faces of both panels to be finished with a fabric layer from the Cara range ASP1H ASP1W ASP1L ASP1 Panel Absorption Coefficients Weight (AP1H)= 18kg Weight (AP1W) = 24kg Weight (AP1L) = 30kg Height = 1200mm Width = 600mm Closed Depth (ASP1H) = 126mm Closed Depth (ASP1W) = 176mm Closed Depth (ASP1L) = 226mm Fabric detail available in any of these standard options

4 CD1 Ceiling Diffuser CD1 is a simple yet effective curved panel for ceiling mounting, above your mix position, or anywhere that needs that extra touch of diffusion. CD1 was designed to diffuse coherent echoes from large flat surfaces. CD1 is effective at reducing standing waves often found in parallel floor to ceiling arrangements. Not to say it has to be ceiling mounted though! CD1 operates primarily at mid to high band frequencies. Can be painted in any colour specified, or finished with a hardwood veneer in one of our standard species. Weight = 18kg Height = 2400mm Width = 1200mm Depth = 280mm

5 HCT Hard Corner Trap HCT is a heavy free standing unit designed to neutralise low-frequency standing wave nodes, often particularly problematic in room corners. Consists of a front facing grid of holes, acting as a Helmholtz Resonance trap, leading to a large cavity filled with acoustically absorbent insulation. Provides significant absorption of low-band sound, centred around a particular frequency, defined by the front grid spacing and to be specified upon ordering usually made to counteract the acoustic resonance of the room. Available in two models, HCT1 full-height or HCT2 half height. The HCT2 version comes with an overhanging top plate, providing a small additional shelf/surface. Both models available at 30 or 45 degree angles. Can have painted or Hardwood Veneered finish, in one of the available species. HCT1 Height = 2000mm - HCT2 Height = 1000mm Width = 750mm HCT1 Weight = 65kg - HCT2 Weight = 32kg

6 PD1 Polycylindrical Diffuser PD1 is a Wall mounted acoustic treatment unit large cylindrically curved wooden surface filled with acoustic treatment foam. Provides significant absorption and diffusion of a wide range of frequencies, primarily mid- to high-band. Very useful for preserving the reverberation time in a room without introducing slap. Available in half- or full-height versions. Half height versions are ideal for mounting high on a wall, allowing space underneath for furniture. Heavy, sturdy construction these will need solid timbers within the wall to which they are to be attached, or can be attached anywhere on a masonry wall. PPD1 has a perforated curved front panel, allowing diffusion characteristics to remain while removing the low end absorption properties of PD1. Available as a painted finish or in any of the available wood species. Weight = 55kg Height = 2000mm Width = 1156mm Depth = 285mm (at deepest point)

7 SWD1 Small Wall Diffuser SWD1 is a smaller version of CD1, helping diffuse sound around the room, and helping to minimize standing waves. SWD1 can be mounted anywhere. Ceiling or wall, wherever you want it. Provides excellent diffusion of primarily high band frequencies. Very light and very versatile. Provides a quick, cheap and flexible method of acoustically treating a room. SWD1's front panel features a grid of holes to aid diffusion, and to reduce resonance of the panel to the wall. As SWD1 is supplied with button fixings, and due to it's lightweight nature, SWD1 is simple to fix and even remove. This allows more creative flexibility on a session by session basis as it incredibly quick to manipulate your room by adding/removing/repositioning multiple SWD1's. Weight =2kg Height = 600mm Width = 400mm Depth = 63mm Available in painted finish only. Supply us with a paint code to have your exact desired finish.

8 VS1 Vocal Screen VS1 is a mobile vocal screen, allowing almost anywhere to be used for that impromptu vocal take or voiceover. VS1 will stand sturdy on a table top, could be hung on a wall, or mounted at any height desired by using three straight microphone stands. Adjust to your preferred angle by adjusting the leaf panels and you're set! VS1 gives the 'dry' vocal sound people want, minimizes off axis reflections and helps with rejecting room noise. VS1 when closed features hardwood veneered panels, rubber feet and a sturdy yet comfortable carrying handle on top. When opened, VS1 offers a soft acoustic fabric finished panel, in a choice of colours, to give VS1 a professional feel, look and most importantly, specification. Exterior frame and feet are available either painted or with a Hardwood Veneered finish in one of the available species. Soft side is finished with a fabric layer from the Cara range. Closed Height = 700mm Width = 600mm Depth = 102mm Weight = 10kg Leaf Panels Height = 700mm Width = 300mm Depth = 51mm Fabric detail available in any of these standard options