София, 2016 г. Hydrogeo Systems Bulgaria, Rototec Italy, Futura Italy
|
|
|
- Asher Bruce
- 6 years ago
- Views:
Transcription
1 София, 2016 г. Hydrogeo Systems Bulgaria, Rototec Italy, Futura Italy Sofia, 2016
2 1. Advantages 2 page 2. Plastic chamber РО page 3. Plastic chamber РО page 4. Plastic manhole РО page 5. Plastic manhole РО page 6. Plastic manhole РО 1000 straight base 7 page 7. Plastic manhole РО 1000 RML base 8 page 8. Plastic manhole РО 1000 straight base 9 page 9. Plastic manhole РО 1000 in-out base on page 10. Plastic manhole РО 1000 cascade base 11 page 11. Plastic manhole РО 1000 straight base 12 page 12. Plastic manhole made of spiral pipe DN page 13. Rainwater chamber 14 page 14. Accessories. In-sito adapter 15 page 15. Accessories. Extension for the entry of manhole DN page 16. Accessories. Extension for the body of plastic manhole DN page 17. Accessories. Leaf trap for rainwater chamber 17 page 18. General information 17 page 1
3 SHAHTI.COM is a technical & trade center created by Hydrogeo Systems EOOD and supported by its Italian partners Rototec S.p.a. and Futura S.p.a. SHAHTI.COM offer to both private and business clients all kind of plastic manholes and chambers as well as design, consulting, installation and renovation of those kind of products. SHAHTI.COM offers complete integrate solutions РО 400; РО 600; РО 800 ; РО 1000 up to Tested water tightness of the elements and the joints Strength and flexibility of the integral system Low coefficient of friction of all the surfaces Smoot and non-adhesive inside surfaces Innovative and unique design of the bases with slop of 1%. Possibility to connect to pipelines of all kind and materials Made of polyethylene and/or polypropylene Fast and easy installation. No need of heavy equipment on the site. Suitable for installation in sites with high level of underground water. EPDM /rubber/ gasket for complete water tightness Integrated steps to ease the access and for maximum safety. Sand covering is offered as an option. Products are tested and certified in conformity with the European Standards /ЕN/. The raw material is virgin polyethylene and/or polypropylene colored into the masse. 100% recyclable materials. Optimal balance between price and quality. Fast delivery Our team could work in your site. Installation and instruction Tailor-made products as per customer s design. Short delivery time. Possibility to connect to GRP, concrete or clay pipelines. 2
4 Plastic manhole DN 400 code Р003 DN 50 DN 110, DN 160 DN 200 with standard rubber gasket DN 250* DN 315* *pre-fabricated Telescopic pipe ID/OD OD 400 / ID 348 РЕ/РР OD 450 /ID 400 РЕ/PP Socket connections Min / Max Height
5 Plastic manhole DN 600 code Р004 DN 50 DN 110, DN 160 DN 200 with standard rubber gasket DN 250* DN 315* DN 400* *pre-fabricated Telescopic pipe ID/OD OD 630/ ID 570 РЕ/РР OD 700 /ID 600 РЕ/PP Socket connections Min / Max Height
6 Plastic manhole DN 800 code Р101 DN/OD with standard rubber gasket DN/OD 400* *pre-fabricated Telescopic pipe ID/OD OD 800/ ID 678 РЕ/РР OD 700 /ID 600 РЕ/PP Socket connections Min / Max Height
7 ENTRY/ REDUCING CONE EXTENSION WITH INTEGRATED STEPS STRAIGHT IN/OUT BASE RML BASE 6
8 Plastic manhole DN 1000 code Р109 Straight base DN/OD DN/ID 300, 400 with standard rubber gasket *Welding in factory with extruder by option Telescopic body ID/OD Extension with integrated steps Н=500, H=800, H=1000 Structural pipe ID 1000 РЕ/РР OD 1200 РЕ/PP Socket connections Slop 1% From Φ140 to Φ430 7
9 Plastic manhole DN 1000 code Р005 Base RML Right/sleight/left DN/OD DN/ID 300, 400 DN 500* with standard rubber gasket *Welding in factory with extruder by option Telescopic body ID/OD Extension with integrated steps Н=500, H=800, H=1000 Structural pipe ID 1000 РЕ/РР OD 1200 РЕ/PP Socket connections 8
10 Plastic manhole DN 1000 code PRO 102 Straight base DN/OD DN/ID 300, 400, 500, 600 with standard rubber gasket Telescopic body ID/OD Extension with integrated steps Н=500, H=800, H=1000 Structural pipe ID 1000 РЕ/РР OD 1200 РЕ/PP Socket connections 9
11 Plastic manhole DN 1000 code 104 In out base 90 DN/OD DN/ID 200, 300, 400, with standard rubber gasket *Welding in factory with extruder by option Telescopic body ID/OD Extension with integrated steps Н=500, H=800, H=1000 Structural pipe ID 1000 РЕ/РР OD 1200 РЕ/PP Socket connections DN In / out DN1 H Hu H1 L OD OD OD OD ID ID ID ID
12 Plastic manhole DN 1000 Code 107 Cascade slow-flow base DN/OD DN/ID 200, 300, 400, 500 with standard rubber gasket *Welding in factory with extruder by option Telescopic body ID/OD Extension with integrated steps Н=500, H=800, H=1000 Structural pipe ID 1000 РЕ/РР OD 1200 РЕ/PP Socket connections 11
13 Plastic manhole DN 1000 Code 108 Straight base DN/OD DN/ID 400, 500, 600 with standard rubber gasket *Welding in factory with extruder by option Telescopic body ID/OD Structural pipe ID 1000 РЕ/РР OD 1200 РЕ/PP Socket connections 12
14 Plastic manhole DN/ID 1000 до DN/ID 2500 Straight base Min DN 200 Max DN 2000 Welding in factory with extruder Telescopic body ID Structural spiral pipe
15 Description Material Dimensions Rainwater chamber Outlet for PVC pipe Code Р001 DN /OD 160 or 200 Note Connection with EPDM seals or with an extruder. 14
16 Flex-adapter for DN/OD 160 и 200 connection with PVC pipe Note Fast and save connection Description Material Dimentions Extension DN 600 To cone Code Р012 DN/OD 1000/600 Н=300 Note Extend the level of the manhole to the requested quota. 15
17 Description Material Dimentions Extension DN 1000 Н=500 Code Р009 H=800 Code Р008 H=1000 Code Р007 Extension for manhole DN 1000 Н=500 With incorporated steps Н=800 With incorporated steps Н=1000 With incorporated steps Note The joint is with socket/gasket EPDM rubber connection or with extrusion. 16
18 Description Material Dimentions Leaf trap for For pipes rainwater chamber OD /ID 400 Note Place directly into the rainwater chamber Code Р002 General Information The manholes PRO1000 offered by us are the only ones with slop of 1% prefabricated base. This is to maintain constant the slop of the sewage system. The modules manufactured by roto-molding are very durable and water-tight. For the purposes of building a hydraulic network with age-long and save exploitation could be uses polyethylene as well as polypropylene with additives for UV-protection. These materials provide quantities as strength and flexibility to the final products. Technical & trade center SHAHTI.COM offers products in orange colored in masse which is an apparent prove that the uses raw material is virgin. All the products are 100% recyclable and the material could be used for different productions. We offer an integral system of chambers and manholes РО 400/600/800/1000. Technical & trade center SHAHTI.COM offers very flexible and multifunctional range of bases, extensions and cones to cover all the client s needs. The modules are very easy for quick installation to save your time, and produced in Bulgaria so we can offer an optimal balance between price and quality. 17
Large polyethylene pipes
Large polyethylene pipes Krah pipes for pressure application Krah-Pipes are large polyolefin pipes up to an internal diameter of 4000mm and a maximum solid wall thickness of 200mm. The preferred jointing
BS OHSAS 18001:2007 No. АТ-00569/0. macedonian quality
ISO 9001:2008 No. АТ-10310/0 ISO 14001:2004 No. АТ-01397/0 BS OHSAS 18001:2007 No. АТ-00569/0 80 macedonian quality 1 2 3 quick, efficient and effective production The new generation INTERHOL manholes
CORRUGATED HDPE PIPES FOR SEWER AND STORMWATER
50 corrugated pipes CORRUGATED HDPE PIPES FOR SEWER AND STORMWATER TECHNICAL SPECIFICATIONS SANS 21138-3 ISO 9001/2008 The pipe is black outside and blue on the inside Supplied in lengths of 6 meters.
SPC recently concluded a partnership with a leading Italian company providing innovative and complete polyethylene pipe systems in 30 countries.
50 corrugated pipes SPC celebrates 50 years of manufacturing concrete pipes and related products for the Southern African market. To further serve the region, SPC is proud to announce the manufacturing
DROSSBACH HD Series Corrugated Plastic Pipe Machines.
DROSSBACH HD Series Corrugated Plastic Pipe Machines. Drossbach HD series Fast, efficient and more flexible corrugated plastic pipe production. DROSSBACH has been producing corrugated plastic pipe machines
Tough pipe for a tough environment
Sanitary Sewer Pipe Tough pipe for a tough environment SaniTite Sanitary Sewer Pipe delivers the features that engineers, contractors and municipalities demand durability, performance, handling, toughness
CENTRAL AXIS MAINTENANCE SHAFT VERSION 1.0
CENTRAL AXIS MAINTENANCE SHAFT VERSION 1.0 The PVC Central Axis offers a new solution to traditional manholes in sewer applications. Designed for easy passage of camera and cleaning equipment, meaning
POLYETHYLENE AND POLYPROPYLENE INTERHOL MANHOLES. BS OHSAS 18001:2007 No. АТ-00569/0
POLYETYLENE AND POLYPROPYLENE INTEROL MANOLES ISO 9001:2008 No. АТ-10310/0 ISO 14001:2004 No. АТ-01397/0 BS OSAS 18001:2007 No. АТ-00569/0 INTRODUCTION With our 38 years experience as dynamic and developing
Large plastic pipe technology. Large diameter pressure pipe. up to DN/ID 5000 mm
Large plastic pipe technology Large diameter pressure pipe up to DN/ID 5000 mm Powerful and designed according to YOUR specifications Large diameter pressure pipes No sagging and less wallthickness saves
PRO POLYPROPYLENE MANHOLES.
PRO POLYPROPYLENE MANHOLES CONTENTS 1 INTRODUCTION... 4 1.1 Why should we choose plastic manholes and rain gully... 4 1.2 Why polypropylene (PP) has been chosen for PRO manholes and rain gully... 4 1.3
POLYETHYLENE AND POLYPROPYLENE NEW GENERATION INTERHOL MANHOLES FUTURE. BS OHSAS 18001:2007 No. АТ-00569/0. macedonian quality
POLYETHYLENE AND POLYPROPYLENE NEW GENERATION INTERHOL MANHOLES FUTURE ISO 9001:2008 No. АТ-10310/0 ISO 14001:2004 No. АТ-01397/0 BS OHSAS 18001:2007 No. АТ-00569/0 macedonian quality 25 or FOR TECHNOLOGY
Large Diameter Piping System DURABLE PE-PIPING SYSTEM FOR HIGH- VOLUME FLOW
Large Diameter Piping System DURABLE PE-PIPING SYSTEM FOR HIGH- VOLUME FLOW 1 The Plastics Experts. AGRU Pipe & Fitting Systems offer a complete range of high-quality pipes, fittings, valves and customized
Specifications for SWC #110: Pipe, Pipe Liner, & Liner Installation
1. Drainage Pipe Specifications Specifications for SWC #110: Pipe, Pipe Liner, & Liner Installation 1.1 Corrugated Metal, Aluminized, and Culvert Pipe (Round) Please see TDOT standard drawing D-PB-2 and
THERMOPLASTIC MANHOLES FOR AND OUT OF LARGE DIAMETER PIPES
THERMOPLASTIC MANHOLES FOR AND OUT OF LARGE DIAMETER PIPES Introduction: Manholes are, beside pipes and fittings, an essential element of underground pipe-systems. They are used for maintenance and the
List of products of harmonised standards Code 28: PIPES-TANKS AND ANCILLARIES NOT IN CONTACT WITH WATER INTENDED FOR HUMAN CONSUMPTION
List of products of harmonised standards Code 28: PIPES-TANKS AND ANCILLARIES NOT IN CONTACT WITH WATER INTENDED FOR HUMAN CONSUMPTION EN 295-1 Part 1: Requirements for pipes, fittings and joints Vitrified
ISO INTERNATIONAL STANDARD
INTERNATIONAL STANDARD ISO 21138-2 First edition 2007-10-15 Plastics piping systems for non-pressure underground drainage and sewerage Structured-wall piping systems of unplasticized poly(vinyl chloride)
Independent certification of your products & services. 2.2 Relevant Standards 1. SCOPE
1. SCOPE This schedule specifies requirements for the AquaSpira CSR (Composite Steel Reinforced) pipe system as manufactured by AquaSpira Limited. It is applicable for underground gravity drains, sewer
D-Raintank. Forward-Looking Rainwater Drainage. Collecting Drainage Saving
D-Raintank Forward-Looking Rainwater Drainage Collecting Drainage Saving The D-Raintank effectively solves the problem of local drainage of rainwater! Illustration of the trend of area requirement in Germany
PERFECT PIPE THE REVOLUTION CONTINUES
PERFECT PIPE THE REVOLUTION CONTINUES www.bilcon.com.sg 02 _ A new era My name is Mr. Perfect. I am an expert in pipe construction and will guide you through the world of Technology. The revolution continues
SPECIAL SPECIFICATION 6623 Multi-Duct Conduit System
2004 Specifications Houston District SPECIAL SPECIFICATION 6623 Multi-Duct Conduit System 1. Description. Furnish and place a Multi-Duct Conduit (MDC) system that is suitable for installation in an outdoor
Metro Drain & N-Drain
Metro Drain & DN100-00 Twinwall Drainage Systems e m a i l : s a l e s @ n a y l o r. c o. u k w e b : w w w. n a y l o r. c o. u k Winners - Growing Business The MANUFACTURING EXCELLENCE Awards Winner
WATER AND SEWAGE SYSTEMS
MORE THAN 30 YEARS OF EXPERIENCE INDUSTRY CATALOGUE WATER AND SEWAGE SYSTEMS WATER AND SEWAGE SYSTEMS INDUSTRY AND MINING TELECOMMUNICATI ONS AND POWER INDUSTRY INTERNAL INSTALLATION S SPORTS AND RECREATION
Maintenance Access Shafts
Maintenance Access Shafts For wastewater and stormwater systems Utilities Solutions INTRODUCTION The Marley Maintenance Access Shaft System has been developed to primarily help local authorities eliminate
FUNNEL DRAINAGE SYSTEM WITH HIGH HYDRAULIC PERFORMANCE FOR EXTENDED AREAS. Perfect By Definition!
FUNNEL DRAINAGE SYSTEM WITH HIGH HYDRAULIC PERFORMANCE FOR EXTENDED AREAS Perfect By Definition! MUFLESYSTEM FUNNEL High Performance for drainage System The FUNNEL is a "high performance" drainage system
SSAB water mains. A reliable and economically advantageous solution for water supply.
SSAB water mains A reliable and economically advantageous solution for water supply www.ssab.com/infra SSAB S SYSTEM OF WATER MAINS DISTRIBUTES CLEAN WATER SAFELY A system made up of steel water mains
ISO INTERNATIONAL STANDARD
INTERNATIONAL STANDARD ISO 21138-3 First edition 2007-10-15 Plastics piping systems for non-pressure underground drainage and sewerage Structured-wall piping systems of unplasticized poly(vinyl chloride)
Weholite LIGHTWEIGHT PIPE SYSTEM
Weholite LIGHTWEIGHT PIPE SYSTEM The lightweight pipe that takes a heavier load Weholite pipe is large diameter, profile wall pipe made from highdensity polyethylene (HDPE) resin, which is manufactured
A reliable solution for ditching, underpassing and rainwater drainage
PIPES AND CHAMBERS CULVERT PIPES A reliable solution for ditching, underpassing and rainwater drainage Culvert pipes are used to convey drain pipe water or rainwater under the ground. The smallest (110
Method for Installation of PEHD Manholes - a technical report with 29 self-explanatory Figures -
Method for Installation of PEHD Manholes - a technical report with 29 self-explanatory Figures - 1. HDPE Manhole & Chamber Design PEHD Manhole and Chamber design stipulates various manufacturing configurations
is a patented system.
Funnel The is a "high performance" drainage system where a ductile iron "grating" collects rainwater from the surface and, through a ductile iron "cone", conveys it into the HD-PE "pipe" with calculated
Testing. Test drainage products according to the applicable AASHTO or ASTM specification, except as otherwise noted.
909.01 Section 909. DRAINAGE PRODUCTS 909.01 General Requirements. If only the size and class are specified for a culvert or sewer, use the pipe materials as shown in Table 401-1 and 402-1 respectively.
DUCTILE IRON PIPES AND FITTINGS DETAILED PRODUCTS SPECIFICATIONS
DUCTILE IRON PIPES AND FITTINGS DETAILED PRODUCTS SPECIFICATIONS General All Materials shall be EN, ISO or equivalent standard and shall be supplied from approved manufacturers. According to the International
Product and Installation Guide
Uniclass CI/SfB Feb 2005 L7314:P71 (52.5) In6 TW203 EPIC J3413:X71 TwinWall Surface & Storm Water Drainage System Product and Installation Guide FOR COMMERCIAL AND INDUSTRIAL APPLICATIONS Intelligent Solutions
PRODUCT SPECIFICATIONS FOR PRODUCTS AND MATERIALS. Numerical Listing
S FOR PRODUCTS AND MATERIALS Numerical Listing WSA PS 200 WSA PS 201 WSA PS 202 WSA PS 202S Ductile Iron Pipes (CIOD) for Pressure Applications - Water Supply and Sewerage Ductile Iron Fittings (CIOD)
PRODUCTION OF POLYETHYLENE AND POLYPROPYLENE PIPES POLYPROPYLENE SEWAGE PIPES PPHM HIGH PERFORMANCE PIPES.
PRODUCTION OF POLYETHYLENE AND POLYPROPYLENE PIPES POLYPROPYLENE SEWAGE PIPES PPHM HIGH PERFORMANCE PIPES www.konti-hidroplast.com.mk CONTENTS INTRODUCTION...2 PP THE MATERIAL OF THE FUTURE...5 PIPE CONSTRUCTION...5
12/03/12 T.P V1.0. Pipex px Product Group: Manholes, Chambers & Tanks. Pipex px Product Type: Packaged Pumping Station
Pipex px Product Group: Manholes, Chambers & Tanks Pipex px Product Type: Packaged Pumping Station Pipex px Specification: PX-MH-SP-B.01 Pipex px Packaged Pumping Station Bespoke Pumping Stations are prefabricated
Sewage and rainwater. Experience the leading GIGAPIPE System! GIGAPIPE System. PP-System SN8 DN / ID 150 mm DN / ID 1000 mm
Sewage and rainwater Experience the leading GIGAPIPE System! GIGAPIPE System PP-System SN8 DN / ID 150 mm DN / ID 1000 mm DROSSBACH corrugated GIGAPIPE Systems Lighter, more solid and truly higher quality!
PIPING SOLUTIONS Drainage HDPE ID DRAINAGE PIPES
PIPING SOLUTIONS Drainage HDPE ID DRAINAGE PIPES 196 BELOW GROUND HDPE ID DRAINAGE PIPES Polietylene corrugated ID drainage pipes Excess water in the soil can cause serious problems on land and objects
Underground fire hydrants
Underground fire hydrants The company was founded in 987 by transforming the former CSA, which was a trading company dealing with pipes and valves for water networks, into a manufacturing company, through
PIPING SOLUTIONS Drainage PP ID DRAINAGE PIPES
PIPING SOLUTIONS Drainage PP ID DRAINAGE PIPES 202 BELOW GROUND PP ID DRAINAGE PIPES Polypropilene corrugated drainage pipes ID 203 Excess of water in the soil can cause serious problems on land and objects
SAFE-TANK DOUBLE WALL TANKS HIGH DENSITY CROSSLINKED POLYETHYLENE STORAGE TANKS WITH OXIDATION RESISTANT LINING SYSTEM (NSF/ANSI 61)
SAFE-TANK DOUBLE WALL TANKS HIGH DENSITY CROSSLINKED POLYETHYLENE STORAGE TANKS WITH OXIDATION RESISTANT LINING SYSTEM (NSF/ANSI 61) PART 1-GENERAL 1.01 Requirements 1. The CONTRACTOR shall provide SAFE-Tank
TRIPLUS. Triple layer soundproof waste and drainage system inside the buildings
TRIPLUS Triple layer soundproof waste and drainage system inside the buildings Media-tic - Barcelona (Spain) 2 Triplus, the evolution of push-fit waste and drainage systems AT DE DK IT NO PL RU SE UA The
Concrete Protection CONCRETE PROTECTIVE LINERS
Concrete Protection CONCRETE PROTECTIVE LINERS EN Precast pipe with AGRU Sure Grip Sure Grip system The Sure Grip concrete protective liner system, developed and patented by AGRU, is a high-quality solution
SILERE. Soundproof waste and drainage system inside the buildings
SILERE Soundproof waste and drainage system inside the buildings Distillery Hill - Sydney (Australia) SILERE Silere, the leading push-fit soundproof waste system Over recent years there has been an increase
YOUR SPECIALIST IN BIOGAS TECHNOLOGY
YOUR SPECIALIST IN BIOGAS TECHNOLOGY Experience, Trust, Continuity CONVECO is a landmark and leader in the Italian market for the biogas plants We design, develop and produce a full range of products that
Why are BorECO polypropylene materials the best for your sewage and drainage pipes?
Why are BorECO polypropylene materials the best for your sewage and drainage pipes? MEMBER OF 10 good reasons for choosing BorECO polypropylene for sewage and drainage systems compared to other materials
PP3. Push-fit waste and drainage system inside buildings
PP3 Push-fit waste and drainage system inside buildings Museum of Contemporary Art - Bucharest (Romania) PP3 Valsir PP3, the latest technology in push-fit systems Valsir PP3 is a waste system made up of
PRECAST RECTANGULAR CHAMBERS
STANDARD MODELS GENERAL ROUGH SKETCH Available for: Sewer manhole, valve chamber, trouser manhole, and pumping station. Ø60-Ø762 ADJUSTMENT RING 7-00-2-0 20-2 30-60 RING 200-30 60-60 000-220 9ø 6 FLAT
HIGH DENSITY CROSSLINKED POLYETHYLENE STORAGE TANKS WITH OXIDATION RESISTANT LINING SYSTEM (NSF/ANSI 61)
PART 1-GENERAL INTEGRALLY MOLDED FLANGED OUTLET (IMFO ) - COMPLETE DRAIN HIGH DENSITY CROSSLINKED POLYETHYLENE STORAGE TANKS WITH OXIDATION RESISTANT LINING SYSTEM (NSF/ANSI 61) 1.01 Requirements 1. The
Adoptable and Non-Adoptable Assemblies.
Access and Inspection Chambers Adoptable and Non-Adoptable Assemblies www.brettmartin.com New render DRAINAGE PLUMBING RAINWATER ROOFING DRAINAGE PLUMBING DRAINAGE SYSTEMS Brett Martin s Plumbing and Drainage
Pipeline renovation with Omega-Liner close-fit lining
Pipeline renovation with Omega-Liner close-fit lining Omega-Liner close fit lining fast and reliable solution for sewer renovation In the Omega-Liner close-fit lining the old sewer pipeline is replaced
EUROFLO TECHNICAL BROCHURE 1550MM 2150MM
EUROFLO TECHNICAL BROCHURE 1550MM 2150MM CONTENTS PAGE General 2 Material 4 Profiled pipes 5 Programme 6 Static property 8 Structure 9 Marking 10 Jointing system 11 Laying 12 System advantages at a glance
Ridgidrain NBS Specification
Ridgidrain NBS Specification July 2014 R12 DRAINAGE BELOW GROUND Polypipe Civils, Charnwood Business Park, North Road, Loughborough, Leicestershire, LE11 1LE. Tel: +44 (0)1509 615 100. Fax: 01509 610 215.
AGRULINE large diameter piping system THE DURABLE PE-PIPING SYSTEM FOR HIGH VOLUME FLOW
AGRULINE large diameter piping system THE DURABLE PE-PIPING SYSTEM FOR HIGH VOLUME FLOW EN The Plastics Experts. The AGRULINE product group offers a complete, high-quality product range of pipes, fittings,
ISO WASTEWATER TREATMENT SYSTEMS. JFC Polska Sp. z o.o. www: oczyszczalnie-jfc.pl ENVIRONMENTAL LY CERTIFIED HIGHEST QUALITY ISO WE HAVE
WASTEWATER TREATMENT SYSTEMS WE HAVE MARKING ACCOR- DING TO 12566-3+A2:2013 ENVIRONMENTAL LY CERTIFIED ISO 14001 HIGHEST QUALITY ISO 9001 JFC Polska Sp. z o.o. www: oczyszczalnie-jfc.pl Index Wastewater
Sure-Grip System. A System with Benefits. Concrete Protection
Concrete Protection Concrete Protection The Sure-Grip concrete protective liner system, developed and patented by Agru, is a high-quality innovative solution for the long-term protection of concrete structures.
HDPE. Weldable high-density polyehtylene for waste and drainage systems
HDPE Weldable high-density polyehtylene for waste and drainage systems La Scala theatre - Milan (Italy) 2 HDPE Valsir HDPE, the versatility of a waste system in high density polyethylene AT AU BE CH DE
Product catalogue. Socket cast iron pipe system
Product catalogue Socket cast iron pipe system GALLERY ADVANTAGES OF SOCKET PIPE SYSTEM Classic form: Fits well the architecture of renovated buildings. Wide range of products: Pipes, siphons, stormwater
DVS Technical - Codes and Bulletins. Table of Contents
(1989-02) Testing of semi-finished products of thermoplastics Bases indications... 1 Supplement 4 Supplement 5 thermoplastics; Basics indications Material and abbreviation.. 5 thermoplastics; Basics indications
The Concrete Solution
The Concrete Solution SAFE EFFECTIVE CONTAINMENT Aqua-Tank provides a safe, cost effective method of containment with numerous applications within the Water, Waste and Industrial sectors. Guaranteed factory
All content of this installation guide is taken from ASTM1759, ISO13272 and ATV127 standards which the first two standards are the basic national standard of Iran and the ATV standard has been used in
Underground System. Description
Description Insapipe is a factory fabricated and insulated Underground piping system designed for direct burial into an unlined trench. The product is manufactured generally to British Standard 4508 for
Facility Sanitary Sewers
University of New Hampshire University of New Hampshire Scholars' Repository Division 22 Plumbing Chapter 5 Technical Construction and Renovation Standards 4-23-2015 221313 - Facility Sanitary Sewers Sandra
Uponor Infra renovation systems. Renovation of pressure and gravity pipelines, manholes, tanks and road culverts
Uponor Infra renovation systems Renovation of pressure and gravity pipelines, manholes, tanks and road culverts Renovation in Uponor Infra technology Most of the water and sewage infrastructure in Europe
(For compliance with the new sewers for adoption regulation or building regulations part H1)
Plastic Drainage Keyline offers a comprehensive range of products suitable for all building, foul, surface water and land drainage applications - including new innovative, cost-effective systems for compliance
EnviroModule TM 2. modular underground tank systems. rainwater harvesting infiltration on-site detention bio-remediation filtration
EnviroModule TM 2 modular underground tank systems rainwater harvesting infiltration on-site detention bio-remediation filtration our mission AUSDRAIN TM recognises that water is one of our most precious
SPECIAL SPECIFICATION 5925 Polyvinyl Cloride (PVC) Sewer Pipe and Fittings
1993 Specifications CSJ 0144-01-060 SPECIAL SPECIFICATION 5925 Polyvinyl Cloride (PVC) Sewer Pipe and Fittings 1. General. (1) Scope. This Section includes the furnishing, installation, and subsequent
Specifications for Concrete Embedment Liner
Specifications for Concrete Embedment Liner Part 1: GENERAL 1.01 SECTION INCLUDES A. Specifications and guidelines for MANUFACTURING high-density polyethylene embedment liners. 1.02 REFERENCES A. American
Ultimate Pipeline Systems POWER PLASTIC FACTORY LLC.
Ultimate Pipeline Systems POWER PLASTIC FACTORY LLC e-mail: powerbmm@emirates.net.ae www.powergroups.ae Disclaimer All information in this catalogue is correct to our best of knowledge at the time of preparation.
Project Report. KPPS - pipe installation - Bree (Belgium)
Project Report KPPS - pipe installation - Bree (Belgium) KPPS pipe system DN 400, 10 bar KPPS - Technical Information Situation The job The Flemish authorities of water supply in charge of the Belgium
CONNECTION TO INSPECTION CHAMBERS PRAKTO
CONNECTION TO INSPECTION CHAMBERS PRAKTO The inspection chambers PRAKTO made by Pipelife are designed and manufactured to be conveniently and securely connected to pipes and fittings of the Pragma series
Bellofram Silicones Inc Ohio River Boulevard Newell, West Virginia Toll-free: Fax:
TM Silicones Bellofram Silicones Inc. 8019 Ohio River Boulevard Newell, West Virginia 26050 www.belloframsilicones.com Bellofram Closed Cell Silicone Sponge Extrusion Products Bellofram Silicones closed
Proudly Manufactured in the USA
Custom Plastic Extrusions, Fabrications, Injection Molding, Plastic Machined Nipples, Pipe, Hose, Tubing Proudly Manufactured in the USA 110 E. Crowther Avenue Placentia, CA 92870 Phone: (800) 648-6804
Energy from ground, wastewater, lakes and rivers. FRANK GET System. Geothermal energy
Energy from ground, wastewater, lakes and rivers FRANK GET System Geothermal energy 2 FRANK Geosynthetics Geothermal energy Renewable. Cost-effective. Future-proof. The ground under us stores a lot of
SAMPLE SPECIFICATION for HIGH DENSITY POLYETHYLENE PIPING LEACHATE COLLECTION SYSTEMS
ISCO INDUSTRIES, LLC SAMPLE SPECIFICATION for HIGH DENSITY POLYETHYLENE PIPING LEACHATE COLLECTION SYSTEMS 1. GENERAL This specification shall govern the materials and installation of high density polyethylene
INDUSTRIAL PIPING SYSTEMS FOR INDUSTRIAL APPLICATIONS
INDUSTRIAL PIPING SYSTEMS FOR INDUSTRIAL APPLICATIONS EN INDUSTRIAL PIPING SYSTEMS FOR INDUSTRIAL APPLICATIONS The Plastics Experts. AGRU Kunstofftechnik GmbH is a family-owed, highly productive enterprise,
MATERIALS STORM DRAIN PIPE TABLE OF CONTENTS
TABLE OF CONTENTS 1. TYPES OF STORM DRAIN PIPE AND JOINTS...2 2. MANHOLES, CATCH BASINS AND INLETS BLOCK AND BRICK...3 3. PRECAST MANHOLES, CATCH BASINS AND INLETS...4 4. STORM DRAIN STUBS...4 5. STORM
TechMech Engineering Products & Services. Rajkot, Gujarat (India) Complete Composite Solution
TechMech Engineering Products & Services Rajkot, Gujarat (India) Introduction We take this opportunity to introduce ourselves as a composite as well as metal composite products which is being used in various
SECTION 200 SANITARY SEWER MATERIAL SPECIFICATIONS
SECTION 200 SANITARY SEWER MATERIAL SPECIFICATIONS 200-1 MATERIAL SPECIFICATION LIST Rev. May 2011 SEWER UTILITY General: 1. All manufacturers products listed are preferred. Others may be submitted to
Anti Slip Matting. Product code. Format* [mm] Thickness* [mm] For normal loads RH RH ,
![Anti Slip Matting. Product code. Format* [mm] Thickness* [mm] For normal loads RH RH ,](/thumbs/90/102409150.jpg "Anti Slip Matting. Product code. Format* [mm] Thickness* [mm] For normal loads RH RH ,")
03.5 ANTI SLIP MATTING SpanSet Grip - Non-standard sizes are available - Less additional load securing equipment required than without matting If your load starts to slip, load security has failed Sliding
Denlok Performance Advantages
Jacking Strength (tons) 0.08 0.04 0.15 0.25 0.20 0.40 Inches 2.00 3.04 Denlok Performance Advantages Municipal Advantages Minimum 100 year life guarantee Demonstrated results from centuries of vitrified
THE ADVANTAGES HDPE MANHOLES
NIC HDPE manholes are custom fabricated for many varied applications including municipal and industrial manholes, sewer and storm water manholes, leach ate collection, sewer lift stations, siphon structures,
50.20 Drainage Structure Design
50.20 Drainage Structure Design All drainage structures, with the exception of bridges, culvert bridges and, in some cases, culverts, shall be designed for HS20-44 loading. Refer to Section 50.22 for design
HDPE HDPE. Factory PRESSURE PIPING SYSTEM DRAINAGE & SEWERAGE PIPING CABLE DUCT & SUB DUCT. Since 2002 HDPE. for Sewerage Storm Water System HDPE
PRESSURE PIPING SYSTEM DRAINAGE & SEWERAGE PIPING CABLE DUCT & SUB DUCT for Sea Water Intake for Gas Transportation for Sewerage Storm Water System Manholes Factory Since 2002 for Cold Water Supply & Irrigation
Plastic pipes in construction
Plastic pipes in construction Choose the material that best suits your needs. Historical Canplast marketed PVC pipes in 1964, PE pipes in 1980 and PP pipes in 2005. Properties of plastics Raw materials
Membranes for horizontal external constructions
System Platon Membranes for horizontal external constructions Balconies and terraces Separation layer Ballasted roofs Roof parking Green roofs Walkways Artificial turf Dry and healthy buildings Solutions
11/30/12 T.P V1.0. Pipex px Product Group: Manholes, Chambers & Tanks Pipex px Product Type: Combined Sewer Overflow CSO
Pipex px Product Group: Manholes, Chambers & Tanks Pipex px Product Type: Combined Sewer Overflow CSO Pipex px Specification: PX-MH-SP-E.01 Pipex px Combined Sewer Overflow (CSO) Chamber Bespoke Combined
A. This section is intended to provide design guidelines for Utility Direct Buried Piping and Conduit Systems.
Date Description of Change Pages / Sections Modified ID 6/15/16 Entire document - mgl44 PART 1 - INTRODUCTION 1.1 PURPOSE A. This section is intended to provide design guidelines for Utility Direct Buried
Vortex Filters. Conservation Technology
Vortex Filters Vortex Filters are high-rate mechanical filters designed to extract organic debris and particulates from either rooftop or surface rainwater. They can be installed underground using an that
TECHNO GROUP TECHNO PLAST. TECHNO PLAST : Pipe Extrusion manufacturer. TECHNO FIT : Injection moulding manufacturer
TECHNO GROUP TECHNO PLAST : Pipe Extrusion manufacturer TECHNO FIT : Injection moulding manufacturer TECHNO ALIMCO : Blow Moulding manufacturer TECHNO COR : Corrugated Pipe manufacturer TECHNO THERM :
TRIPLUS. Triple layer soundproof waste and drainage system inside the buildings
TRIPLUS Triple layer soundproof waste and drainage system inside the buildings Media-tic - Barcelona (Spain) 2 Triplus, the evolution of push-fit waste and drainage systems The market s increasing attention
Polysewer Gravity Sewer System SPECIFICATION
Polysewer Gravity Sewer System SPECIFICATION July 2014 SCOPE OF WORKS To meet the specific performance criteria detailed within this specification and accompanying drawings. The completed drainage systems
Ducts and Microducts HDPE PIPES FOR FIBER OPTIC & CABLE PROTECTION
Ducts and Microducts HDPE PIPES FOR FIBER OPTIC & CABLE PROTECTION WHO ARE WE? Hebeish Group is the mother company of 4 subsidiary companies, completing each other to provide our customer with full HDPE
Top Performance Pipes for Toughest Conditions
h Top Performance Pipes for Toughest Conditions 2 Corrosion, Abrasion, Impacts: Customized Solutions for the Most Challenging Applications h Top Performance Pipe Systems When aggressive materials are transported
Certification Scheme
Certification Scheme WN Glazed vitrified clay pipes, fittings and their accessories for drains and sewers DIN, Part 1-7 (Edition: March 2018) drains and sewers Page 2 of 22 CONTTS Preface...3 Start of
Presented by: Thermoplastic Piping
Presented by: Thermoplastic Piping VARI-TECH is an acronym for VARIOUS TECHNOLOGIES. The original thrust of the company was to bring engineered products and services to the Northeastern United States market.
PRODUCT SPECIFICATIONS
VEN T I L AT I O N SY ST E M S PRODUCT SPECIFICATIONS WORLD LEADER IN MINE & TUNNEL VENTILATION MAIN FEATURES Standard diameters include: 24, 30, 36, 42, 48, 54 and 60 (610mm, 760, 915, 1070, 1220, 1400
Pipe to Manhole Connectors, Sealants. Pipe to Manhole Connectors, Sealants
ITUPLAST Preformed Butyl Mastic Connector An excellent product of the NPC Company, USA. General Ituplast is a special gasket/sealant intended for sealing between sections of the sewage and drainage inspection
BELLOFRAM SILICONES INC OHIO RIVER BOULEVARD NEWELL, WEST VIRGINIA TOLL-FREE: FAX:
TM Silicones BELLOFRAM SILICONES INC. 8019 OHIO RIVER BOULEVARD NEWELL, WEST VIRGINIA 26050 TOLL-FREE: +1.800.727.5646 FAX: +1.304.387.1212 www.belloframsilicones.com BELLOFRAM Closed Cell Silicone Sponge
OSMADRAIN UNDERGROUND DRAINAGE SYSTEM OSMADRAIN UNIVERSAL GULLY SYSTEM
Wavin UK (Holdings) Ltd Parsonage Way Chippenham Wiltshire SN15 5PN Tel: 01249 654121 Fax: 01249 443286 e-mail: info@wavin.co.uk website: www.wavin.co.uk APPROVAL INSPECTION TESTING CERTIFICATION TECHNICAL